linux/include/sound/dmaengine_pcm.h
Jai Luthra e8343410dd
ALSA: dmaengine: Synchronize dma channel after drop()
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.

In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-11 17:13:31 +01:00

184 lines
6.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+
*
* Copyright (C) 2012, Analog Devices Inc.
* Author: Lars-Peter Clausen <lars@metafoo.de>
*/
#ifndef __SOUND_DMAENGINE_PCM_H__
#define __SOUND_DMAENGINE_PCM_H__
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/dmaengine.h>
/**
* snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM
* substream
* @substream: PCM substream
*
* Return: DMA transfer direction
*/
static inline enum dma_transfer_direction
snd_pcm_substream_to_dma_direction(const struct snd_pcm_substream *substream)
{
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return DMA_MEM_TO_DEV;
else
return DMA_DEV_TO_MEM;
}
int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream *substream,
const struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config);
int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream);
snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream *substream);
int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
struct dma_chan *chan);
int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream);
int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
dma_filter_fn filter_fn, void *filter_data);
int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream);
struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn,
void *filter_data);
struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream);
/*
* The DAI supports packed transfers, eg 2 16-bit samples in a 32-bit word.
* If this flag is set the dmaengine driver won't put any restriction on
* the supported sample formats and set the DMA transfer size to undefined.
* The DAI driver is responsible to disable any unsupported formats in it's
* configuration and catch corner cases that are not already handled in
* the ALSA core.
*/
#define SND_DMAENGINE_PCM_DAI_FLAG_PACK BIT(0)
/**
* struct snd_dmaengine_dai_dma_data - DAI DMA configuration data
* @addr: Address of the DAI data source or destination register.
* @addr_width: Width of the DAI data source or destination register.
* @maxburst: Maximum number of words(note: words, as in units of the
* src_addr_width member, not bytes) that can be send to or received from the
* DAI in one burst.
* @filter_data: Custom DMA channel filter data, this will usually be used when
* requesting the DMA channel.
* @chan_name: Custom channel name to use when requesting DMA channel.
* @fifo_size: FIFO size of the DAI controller in bytes
* @flags: PCM_DAI flags, only SND_DMAENGINE_PCM_DAI_FLAG_PACK for now
* @peripheral_config: peripheral configuration for programming peripheral
* for dmaengine transfer
* @peripheral_size: peripheral configuration buffer size
*/
struct snd_dmaengine_dai_dma_data {
dma_addr_t addr;
enum dma_slave_buswidth addr_width;
u32 maxburst;
void *filter_data;
const char *chan_name;
unsigned int fifo_size;
unsigned int flags;
void *peripheral_config;
size_t peripheral_size;
};
void snd_dmaengine_pcm_set_config_from_dai_data(
const struct snd_pcm_substream *substream,
const struct snd_dmaengine_dai_dma_data *dma_data,
struct dma_slave_config *config);
int snd_dmaengine_pcm_refine_runtime_hwparams(
struct snd_pcm_substream *substream,
struct snd_dmaengine_dai_dma_data *dma_data,
struct snd_pcm_hardware *hw,
struct dma_chan *chan);
/*
* Try to request the DMA channel using compat_request_channel or
* compat_filter_fn if it couldn't be requested through devicetree.
*/
#define SND_DMAENGINE_PCM_FLAG_COMPAT BIT(0)
/*
* Don't try to request the DMA channels through devicetree. This flag only
* makes sense if SND_DMAENGINE_PCM_FLAG_COMPAT is set as well.
*/
#define SND_DMAENGINE_PCM_FLAG_NO_DT BIT(1)
/*
* The PCM is half duplex and the DMA channel is shared between capture and
* playback.
*/
#define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3)
/**
* struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM
* @prepare_slave_config: Callback used to fill in the DMA slave_config for a
* PCM substream. Will be called from the PCM drivers hwparams callback.
* @compat_request_channel: Callback to request a DMA channel for platforms
* which do not use devicetree.
* @process: Callback used to apply processing on samples transferred from/to
* user space.
* @name: Component name. If null, dev_name will be used.
* @compat_filter_fn: Will be used as the filter function when requesting a
* channel for platforms which do not use devicetree. The filter parameter
* will be the DAI's DMA data.
* @dma_dev: If set, request DMA channel on this device rather than the DAI
* device.
* @chan_names: If set, these custom DMA channel names will be requested at
* registration time.
* @pcm_hardware: snd_pcm_hardware struct to be used for the PCM.
* @prealloc_buffer_size: Size of the preallocated audio buffer.
*
* Note: If both compat_request_channel and compat_filter_fn are set
* compat_request_channel will be used to request the channel and
* compat_filter_fn will be ignored. Otherwise the channel will be requested
* using dma_request_channel with compat_filter_fn as the filter function.
*/
struct snd_dmaengine_pcm_config {
int (*prepare_slave_config)(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct dma_slave_config *slave_config);
struct dma_chan *(*compat_request_channel)(
struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_substream *substream);
int (*process)(struct snd_pcm_substream *substream,
int channel, unsigned long hwoff,
unsigned long bytes);
const char *name;
dma_filter_fn compat_filter_fn;
struct device *dma_dev;
const char *chan_names[SNDRV_PCM_STREAM_LAST + 1];
const struct snd_pcm_hardware *pcm_hardware;
unsigned int prealloc_buffer_size;
};
int snd_dmaengine_pcm_register(struct device *dev,
const struct snd_dmaengine_pcm_config *config,
unsigned int flags);
void snd_dmaengine_pcm_unregister(struct device *dev);
int devm_snd_dmaengine_pcm_register(struct device *dev,
const struct snd_dmaengine_pcm_config *config,
unsigned int flags);
int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct dma_slave_config *slave_config);
#define SND_DMAENGINE_PCM_DRV_NAME "snd_dmaengine_pcm"
struct dmaengine_pcm {
struct dma_chan *chan[SNDRV_PCM_STREAM_LAST + 1];
const struct snd_dmaengine_pcm_config *config;
struct snd_soc_component component;
unsigned int flags;
};
static inline struct dmaengine_pcm *soc_component_to_pcm(struct snd_soc_component *p)
{
return container_of(p, struct dmaengine_pcm, component);
}
#endif