linux/fs/xfs/xfs_exchrange.c
Darrick J. Wong 398597c3ef xfs: introduce new file range commit ioctls
This patch introduces two more new ioctls to manage atomic updates to
file contents -- XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE.  The
commit mechanism here is exactly the same as what XFS_IOC_EXCHANGE_RANGE
does, but with the additional requirement that file2 cannot have changed
since some sampling point.  The start-commit ioctl performs the sampling
of file attributes.

Note: This patch currently samples i_ctime during START_COMMIT and
checks that it hasn't changed during COMMIT_RANGE.  This isn't entirely
safe in kernels prior to 6.12 because ctime only had coarse grained
granularity and very fast updates could collide with a COMMIT_RANGE.
With the multi-granularity ctime introduced by Jeff Layton, it's now
possible to update ctime such that this does not happen.

It is critical, then, that this patch must not be backported to any
kernel that does not support fine-grained file change timestamps.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2024-09-01 08:58:19 -07:00

946 lines
26 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2020-2024 Oracle. All Rights Reserved.
* Author: Darrick J. Wong <djwong@kernel.org>
*/
#include "xfs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_quota.h"
#include "xfs_bmap_util.h"
#include "xfs_reflink.h"
#include "xfs_trace.h"
#include "xfs_exchrange.h"
#include "xfs_exchmaps.h"
#include "xfs_sb.h"
#include "xfs_icache.h"
#include "xfs_log.h"
#include "xfs_rtbitmap.h"
#include <linux/fsnotify.h>
/* Lock (and optionally join) two inodes for a file range exchange. */
void
xfs_exchrange_ilock(
struct xfs_trans *tp,
struct xfs_inode *ip1,
struct xfs_inode *ip2)
{
if (ip1 != ip2)
xfs_lock_two_inodes(ip1, XFS_ILOCK_EXCL,
ip2, XFS_ILOCK_EXCL);
else
xfs_ilock(ip1, XFS_ILOCK_EXCL);
if (tp) {
xfs_trans_ijoin(tp, ip1, 0);
if (ip2 != ip1)
xfs_trans_ijoin(tp, ip2, 0);
}
}
/* Unlock two inodes after a file range exchange operation. */
void
xfs_exchrange_iunlock(
struct xfs_inode *ip1,
struct xfs_inode *ip2)
{
if (ip2 != ip1)
xfs_iunlock(ip2, XFS_ILOCK_EXCL);
xfs_iunlock(ip1, XFS_ILOCK_EXCL);
}
/*
* Estimate the resource requirements to exchange file contents between the two
* files. The caller is required to hold the IOLOCK and the MMAPLOCK and to
* have flushed both inodes' pagecache and active direct-ios.
*/
int
xfs_exchrange_estimate(
struct xfs_exchmaps_req *req)
{
int error;
xfs_exchrange_ilock(NULL, req->ip1, req->ip2);
error = xfs_exchmaps_estimate(req);
xfs_exchrange_iunlock(req->ip1, req->ip2);
return error;
}
/*
* Check that file2's metadata agree with the snapshot that we took for the
* range commit request.
*
* This should be called after the filesystem has locked /all/ inode metadata
* against modification.
*/
STATIC int
xfs_exchrange_check_freshness(
const struct xfs_exchrange *fxr,
struct xfs_inode *ip2)
{
struct inode *inode2 = VFS_I(ip2);
struct timespec64 ctime = inode_get_ctime(inode2);
struct timespec64 mtime = inode_get_mtime(inode2);
trace_xfs_exchrange_freshness(fxr, ip2);
/* Check that file2 hasn't otherwise been modified. */
if (fxr->file2_ino != ip2->i_ino ||
fxr->file2_gen != inode2->i_generation ||
!timespec64_equal(&fxr->file2_ctime, &ctime) ||
!timespec64_equal(&fxr->file2_mtime, &mtime))
return -EBUSY;
return 0;
}
#define QRETRY_IP1 (0x1)
#define QRETRY_IP2 (0x2)
/*
* Obtain a quota reservation to make sure we don't hit EDQUOT. We can skip
* this if quota enforcement is disabled or if both inodes' dquots are the
* same. The qretry structure must be initialized to zeroes before the first
* call to this function.
*/
STATIC int
xfs_exchrange_reserve_quota(
struct xfs_trans *tp,
const struct xfs_exchmaps_req *req,
unsigned int *qretry)
{
int64_t ddelta, rdelta;
int ip1_error = 0;
int error;
/*
* Don't bother with a quota reservation if we're not enforcing them
* or the two inodes have the same dquots.
*/
if (!XFS_IS_QUOTA_ON(tp->t_mountp) || req->ip1 == req->ip2 ||
(req->ip1->i_udquot == req->ip2->i_udquot &&
req->ip1->i_gdquot == req->ip2->i_gdquot &&
req->ip1->i_pdquot == req->ip2->i_pdquot))
return 0;
*qretry = 0;
/*
* For each file, compute the net gain in the number of regular blocks
* that will be mapped into that file and reserve that much quota. The
* quota counts must be able to absorb at least that much space.
*/
ddelta = req->ip2_bcount - req->ip1_bcount;
rdelta = req->ip2_rtbcount - req->ip1_rtbcount;
if (ddelta > 0 || rdelta > 0) {
error = xfs_trans_reserve_quota_nblks(tp, req->ip1,
ddelta > 0 ? ddelta : 0,
rdelta > 0 ? rdelta : 0,
false);
if (error == -EDQUOT || error == -ENOSPC) {
/*
* Save this error and see what happens if we try to
* reserve quota for ip2. Then report both.
*/
*qretry |= QRETRY_IP1;
ip1_error = error;
error = 0;
}
if (error)
return error;
}
if (ddelta < 0 || rdelta < 0) {
error = xfs_trans_reserve_quota_nblks(tp, req->ip2,
ddelta < 0 ? -ddelta : 0,
rdelta < 0 ? -rdelta : 0,
false);
if (error == -EDQUOT || error == -ENOSPC)
*qretry |= QRETRY_IP2;
if (error)
return error;
}
if (ip1_error)
return ip1_error;
/*
* For each file, forcibly reserve the gross gain in mapped blocks so
* that we don't trip over any quota block reservation assertions.
* We must reserve the gross gain because the quota code subtracts from
* bcount the number of blocks that we unmap; it does not add that
* quantity back to the quota block reservation.
*/
error = xfs_trans_reserve_quota_nblks(tp, req->ip1, req->ip1_bcount,
req->ip1_rtbcount, true);
if (error)
return error;
return xfs_trans_reserve_quota_nblks(tp, req->ip2, req->ip2_bcount,
req->ip2_rtbcount, true);
}
/* Exchange the mappings (and hence the contents) of two files' forks. */
STATIC int
xfs_exchrange_mappings(
const struct xfs_exchrange *fxr,
struct xfs_inode *ip1,
struct xfs_inode *ip2)
{
struct xfs_mount *mp = ip1->i_mount;
struct xfs_exchmaps_req req = {
.ip1 = ip1,
.ip2 = ip2,
.startoff1 = XFS_B_TO_FSBT(mp, fxr->file1_offset),
.startoff2 = XFS_B_TO_FSBT(mp, fxr->file2_offset),
.blockcount = XFS_B_TO_FSB(mp, fxr->length),
};
struct xfs_trans *tp;
unsigned int qretry;
bool retried = false;
int error;
trace_xfs_exchrange_mappings(fxr, ip1, ip2);
if (fxr->flags & XFS_EXCHANGE_RANGE_TO_EOF)
req.flags |= XFS_EXCHMAPS_SET_SIZES;
if (fxr->flags & XFS_EXCHANGE_RANGE_FILE1_WRITTEN)
req.flags |= XFS_EXCHMAPS_INO1_WRITTEN;
/*
* Round the request length up to the nearest file allocation unit.
* The prep function already checked that the request offsets and
* length in @fxr are safe to round up.
*/
if (xfs_inode_has_bigrtalloc(ip2))
req.blockcount = xfs_rtb_roundup_rtx(mp, req.blockcount);
error = xfs_exchrange_estimate(&req);
if (error)
return error;
retry:
/* Allocate the transaction, lock the inodes, and join them. */
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, req.resblks, 0,
XFS_TRANS_RES_FDBLKS, &tp);
if (error)
return error;
xfs_exchrange_ilock(tp, ip1, ip2);
trace_xfs_exchrange_before(ip2, 2);
trace_xfs_exchrange_before(ip1, 1);
error = xfs_exchmaps_check_forks(mp, &req);
if (error)
goto out_trans_cancel;
/*
* Reserve ourselves some quota if any of them are in enforcing mode.
* In theory we only need enough to satisfy the change in the number
* of blocks between the two ranges being remapped.
*/
error = xfs_exchrange_reserve_quota(tp, &req, &qretry);
if ((error == -EDQUOT || error == -ENOSPC) && !retried) {
xfs_trans_cancel(tp);
xfs_exchrange_iunlock(ip1, ip2);
if (qretry & QRETRY_IP1)
xfs_blockgc_free_quota(ip1, 0);
if (qretry & QRETRY_IP2)
xfs_blockgc_free_quota(ip2, 0);
retried = true;
goto retry;
}
if (error)
goto out_trans_cancel;
/* If we got this far on a dry run, all parameters are ok. */
if (fxr->flags & XFS_EXCHANGE_RANGE_DRY_RUN)
goto out_trans_cancel;
/* Update the mtime and ctime of both files. */
if (fxr->flags & __XFS_EXCHANGE_RANGE_UPD_CMTIME1)
xfs_trans_ichgtime(tp, ip1, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
if (fxr->flags & __XFS_EXCHANGE_RANGE_UPD_CMTIME2)
xfs_trans_ichgtime(tp, ip2, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
xfs_exchange_mappings(tp, &req);
/*
* Force the log to persist metadata updates if the caller or the
* administrator requires this. The generic prep function already
* flushed the relevant parts of the page cache.
*/
if (xfs_has_wsync(mp) || (fxr->flags & XFS_EXCHANGE_RANGE_DSYNC))
xfs_trans_set_sync(tp);
error = xfs_trans_commit(tp);
trace_xfs_exchrange_after(ip2, 2);
trace_xfs_exchrange_after(ip1, 1);
if (error)
goto out_unlock;
/*
* If the caller wanted us to exchange the contents of two complete
* files of unequal length, exchange the incore sizes now. This should
* be safe because we flushed both files' page caches, exchanged all
* the mappings, and updated the ondisk sizes.
*/
if (fxr->flags & XFS_EXCHANGE_RANGE_TO_EOF) {
loff_t temp;
temp = i_size_read(VFS_I(ip2));
i_size_write(VFS_I(ip2), i_size_read(VFS_I(ip1)));
i_size_write(VFS_I(ip1), temp);
}
out_unlock:
xfs_exchrange_iunlock(ip1, ip2);
return error;
out_trans_cancel:
xfs_trans_cancel(tp);
goto out_unlock;
}
/*
* Generic code for exchanging ranges of two files via XFS_IOC_EXCHANGE_RANGE.
* This part deals with struct file objects and byte ranges and does not deal
* with XFS-specific data structures such as xfs_inodes and block ranges. This
* separation may some day facilitate porting to another filesystem.
*
* The goal is to exchange fxr.length bytes starting at fxr.file1_offset in
* file1 with the same number of bytes starting at fxr.file2_offset in file2.
* Implementations must call xfs_exchange_range_prep to prepare the two
* files prior to taking locks; and they must update the inode change and mod
* times of both files as part of the metadata update. The timestamp update
* and freshness checks must be done atomically as part of the data exchange
* operation to ensure correctness of the freshness check.
* xfs_exchange_range_finish must be called after the operation completes
* successfully but before locks are dropped.
*/
/* Verify that we have security clearance to perform this operation. */
static int
xfs_exchange_range_verify_area(
struct xfs_exchrange *fxr)
{
int ret;
ret = remap_verify_area(fxr->file1, fxr->file1_offset, fxr->length,
true);
if (ret)
return ret;
return remap_verify_area(fxr->file2, fxr->file2_offset, fxr->length,
true);
}
/*
* Performs necessary checks before doing a range exchange, having stabilized
* mutable inode attributes via i_rwsem.
*/
static inline int
xfs_exchange_range_checks(
struct xfs_exchrange *fxr,
unsigned int alloc_unit)
{
struct inode *inode1 = file_inode(fxr->file1);
struct inode *inode2 = file_inode(fxr->file2);
uint64_t allocmask = alloc_unit - 1;
int64_t test_len;
uint64_t blen;
loff_t size1, size2, tmp;
int error;
/* Don't touch certain kinds of inodes */
if (IS_IMMUTABLE(inode1) || IS_IMMUTABLE(inode2))
return -EPERM;
if (IS_SWAPFILE(inode1) || IS_SWAPFILE(inode2))
return -ETXTBSY;
size1 = i_size_read(inode1);
size2 = i_size_read(inode2);
/* Ranges cannot start after EOF. */
if (fxr->file1_offset > size1 || fxr->file2_offset > size2)
return -EINVAL;
/*
* If the caller said to exchange to EOF, we set the length of the
* request large enough to cover everything to the end of both files.
*/
if (fxr->flags & XFS_EXCHANGE_RANGE_TO_EOF) {
fxr->length = max_t(int64_t, size1 - fxr->file1_offset,
size2 - fxr->file2_offset);
error = xfs_exchange_range_verify_area(fxr);
if (error)
return error;
}
/*
* The start of both ranges must be aligned to the file allocation
* unit.
*/
if (!IS_ALIGNED(fxr->file1_offset, alloc_unit) ||
!IS_ALIGNED(fxr->file2_offset, alloc_unit))
return -EINVAL;
/* Ensure offsets don't wrap. */
if (check_add_overflow(fxr->file1_offset, fxr->length, &tmp) ||
check_add_overflow(fxr->file2_offset, fxr->length, &tmp))
return -EINVAL;
/*
* We require both ranges to end within EOF, unless we're exchanging
* to EOF.
*/
if (!(fxr->flags & XFS_EXCHANGE_RANGE_TO_EOF) &&
(fxr->file1_offset + fxr->length > size1 ||
fxr->file2_offset + fxr->length > size2))
return -EINVAL;
/*
* Make sure we don't hit any file size limits. If we hit any size
* limits such that test_length was adjusted, we abort the whole
* operation.
*/
test_len = fxr->length;
error = generic_write_check_limits(fxr->file2, fxr->file2_offset,
&test_len);
if (error)
return error;
error = generic_write_check_limits(fxr->file1, fxr->file1_offset,
&test_len);
if (error)
return error;
if (test_len != fxr->length)
return -EINVAL;
/*
* If the user wanted us to exchange up to the infile's EOF, round up
* to the next allocation unit boundary for this check. Do the same
* for the outfile.
*
* Otherwise, reject the range length if it's not aligned to an
* allocation unit.
*/
if (fxr->file1_offset + fxr->length == size1)
blen = ALIGN(size1, alloc_unit) - fxr->file1_offset;
else if (fxr->file2_offset + fxr->length == size2)
blen = ALIGN(size2, alloc_unit) - fxr->file2_offset;
else if (!IS_ALIGNED(fxr->length, alloc_unit))
return -EINVAL;
else
blen = fxr->length;
/* Don't allow overlapped exchanges within the same file. */
if (inode1 == inode2 &&
fxr->file2_offset + blen > fxr->file1_offset &&
fxr->file1_offset + blen > fxr->file2_offset)
return -EINVAL;
/*
* Ensure that we don't exchange a partial EOF block into the middle of
* another file.
*/
if ((fxr->length & allocmask) == 0)
return 0;
blen = fxr->length;
if (fxr->file2_offset + blen < size2)
blen &= ~allocmask;
if (fxr->file1_offset + blen < size1)
blen &= ~allocmask;
return blen == fxr->length ? 0 : -EINVAL;
}
/*
* Check that the two inodes are eligible for range exchanges, the ranges make
* sense, and then flush all dirty data. Caller must ensure that the inodes
* have been locked against any other modifications.
*/
static inline int
xfs_exchange_range_prep(
struct xfs_exchrange *fxr,
unsigned int alloc_unit)
{
struct inode *inode1 = file_inode(fxr->file1);
struct inode *inode2 = file_inode(fxr->file2);
bool same_inode = (inode1 == inode2);
int error;
/* Check that we don't violate system file offset limits. */
error = xfs_exchange_range_checks(fxr, alloc_unit);
if (error || fxr->length == 0)
return error;
/* Wait for the completion of any pending IOs on both files */
inode_dio_wait(inode1);
if (!same_inode)
inode_dio_wait(inode2);
error = filemap_write_and_wait_range(inode1->i_mapping,
fxr->file1_offset,
fxr->file1_offset + fxr->length - 1);
if (error)
return error;
error = filemap_write_and_wait_range(inode2->i_mapping,
fxr->file2_offset,
fxr->file2_offset + fxr->length - 1);
if (error)
return error;
/*
* If the files or inodes involved require synchronous writes, amend
* the request to force the filesystem to flush all data and metadata
* to disk after the operation completes.
*/
if (((fxr->file1->f_flags | fxr->file2->f_flags) & O_SYNC) ||
IS_SYNC(inode1) || IS_SYNC(inode2))
fxr->flags |= XFS_EXCHANGE_RANGE_DSYNC;
return 0;
}
/*
* Finish a range exchange operation, if it was successful. Caller must ensure
* that the inodes are still locked against any other modifications.
*/
static inline int
xfs_exchange_range_finish(
struct xfs_exchrange *fxr)
{
int error;
error = file_remove_privs(fxr->file1);
if (error)
return error;
if (file_inode(fxr->file1) == file_inode(fxr->file2))
return 0;
return file_remove_privs(fxr->file2);
}
/*
* Check the alignment of an exchange request when the allocation unit size
* isn't a power of two. The generic file-level helpers use (fast)
* bitmask-based alignment checks, but here we have to use slow long division.
*/
static int
xfs_exchrange_check_rtalign(
const struct xfs_exchrange *fxr,
struct xfs_inode *ip1,
struct xfs_inode *ip2,
unsigned int alloc_unit)
{
uint64_t length = fxr->length;
uint64_t blen;
loff_t size1, size2;
size1 = i_size_read(VFS_I(ip1));
size2 = i_size_read(VFS_I(ip2));
/* The start of both ranges must be aligned to a rt extent. */
if (!isaligned_64(fxr->file1_offset, alloc_unit) ||
!isaligned_64(fxr->file2_offset, alloc_unit))
return -EINVAL;
if (fxr->flags & XFS_EXCHANGE_RANGE_TO_EOF)
length = max_t(int64_t, size1 - fxr->file1_offset,
size2 - fxr->file2_offset);
/*
* If the user wanted us to exchange up to the infile's EOF, round up
* to the next rt extent boundary for this check. Do the same for the
* outfile.
*
* Otherwise, reject the range length if it's not rt extent aligned.
* We already confirmed the starting offsets' rt extent block
* alignment.
*/
if (fxr->file1_offset + length == size1)
blen = roundup_64(size1, alloc_unit) - fxr->file1_offset;
else if (fxr->file2_offset + length == size2)
blen = roundup_64(size2, alloc_unit) - fxr->file2_offset;
else if (!isaligned_64(length, alloc_unit))
return -EINVAL;
else
blen = length;
/* Don't allow overlapped exchanges within the same file. */
if (ip1 == ip2 &&
fxr->file2_offset + blen > fxr->file1_offset &&
fxr->file1_offset + blen > fxr->file2_offset)
return -EINVAL;
/*
* Ensure that we don't exchange a partial EOF rt extent into the
* middle of another file.
*/
if (isaligned_64(length, alloc_unit))
return 0;
blen = length;
if (fxr->file2_offset + length < size2)
blen = rounddown_64(blen, alloc_unit);
if (fxr->file1_offset + blen < size1)
blen = rounddown_64(blen, alloc_unit);
return blen == length ? 0 : -EINVAL;
}
/* Prepare two files to have their data exchanged. */
STATIC int
xfs_exchrange_prep(
struct xfs_exchrange *fxr,
struct xfs_inode *ip1,
struct xfs_inode *ip2)
{
struct xfs_mount *mp = ip2->i_mount;
unsigned int alloc_unit = xfs_inode_alloc_unitsize(ip2);
int error;
trace_xfs_exchrange_prep(fxr, ip1, ip2);
/* Verify both files are either real-time or non-realtime */
if (XFS_IS_REALTIME_INODE(ip1) != XFS_IS_REALTIME_INODE(ip2))
return -EINVAL;
/* Check non-power of two alignment issues, if necessary. */
if (!is_power_of_2(alloc_unit)) {
error = xfs_exchrange_check_rtalign(fxr, ip1, ip2, alloc_unit);
if (error)
return error;
/*
* Do the generic file-level checks with the regular block
* alignment.
*/
alloc_unit = mp->m_sb.sb_blocksize;
}
error = xfs_exchange_range_prep(fxr, alloc_unit);
if (error || fxr->length == 0)
return error;
if (fxr->flags & __XFS_EXCHANGE_RANGE_CHECK_FRESH2) {
error = xfs_exchrange_check_freshness(fxr, ip2);
if (error)
return error;
}
/* Attach dquots to both inodes before changing block maps. */
error = xfs_qm_dqattach(ip2);
if (error)
return error;
error = xfs_qm_dqattach(ip1);
if (error)
return error;
trace_xfs_exchrange_flush(fxr, ip1, ip2);
/* Flush the relevant ranges of both files. */
error = xfs_flush_unmap_range(ip2, fxr->file2_offset, fxr->length);
if (error)
return error;
error = xfs_flush_unmap_range(ip1, fxr->file1_offset, fxr->length);
if (error)
return error;
/*
* Cancel CoW fork preallocations for the ranges of both files. The
* prep function should have flushed all the dirty data, so the only
* CoW mappings remaining should be speculative.
*/
if (xfs_inode_has_cow_data(ip1)) {
error = xfs_reflink_cancel_cow_range(ip1, fxr->file1_offset,
fxr->length, true);
if (error)
return error;
}
if (xfs_inode_has_cow_data(ip2)) {
error = xfs_reflink_cancel_cow_range(ip2, fxr->file2_offset,
fxr->length, true);
if (error)
return error;
}
return 0;
}
/*
* Exchange contents of files. This is the binding between the generic
* file-level concepts and the XFS inode-specific implementation.
*/
STATIC int
xfs_exchrange_contents(
struct xfs_exchrange *fxr)
{
struct inode *inode1 = file_inode(fxr->file1);
struct inode *inode2 = file_inode(fxr->file2);
struct xfs_inode *ip1 = XFS_I(inode1);
struct xfs_inode *ip2 = XFS_I(inode2);
struct xfs_mount *mp = ip1->i_mount;
int error;
if (!xfs_has_exchange_range(mp))
return -EOPNOTSUPP;
if (fxr->flags & ~(XFS_EXCHANGE_RANGE_ALL_FLAGS |
XFS_EXCHANGE_RANGE_PRIV_FLAGS))
return -EINVAL;
if (xfs_is_shutdown(mp))
return -EIO;
/* Lock both files against IO */
error = xfs_ilock2_io_mmap(ip1, ip2);
if (error)
goto out_err;
/* Prepare and then exchange file contents. */
error = xfs_exchrange_prep(fxr, ip1, ip2);
if (error)
goto out_unlock;
error = xfs_exchrange_mappings(fxr, ip1, ip2);
if (error)
goto out_unlock;
/*
* Finish the exchange by removing special file privileges like any
* other file write would do. This may involve turning on support for
* logged xattrs if either file has security capabilities.
*/
error = xfs_exchange_range_finish(fxr);
if (error)
goto out_unlock;
out_unlock:
xfs_iunlock2_io_mmap(ip1, ip2);
out_err:
if (error)
trace_xfs_exchrange_error(ip2, error, _RET_IP_);
return error;
}
/* Exchange parts of two files. */
static int
xfs_exchange_range(
struct xfs_exchrange *fxr)
{
struct inode *inode1 = file_inode(fxr->file1);
struct inode *inode2 = file_inode(fxr->file2);
int ret;
BUILD_BUG_ON(XFS_EXCHANGE_RANGE_ALL_FLAGS &
XFS_EXCHANGE_RANGE_PRIV_FLAGS);
/* Both files must be on the same mount/filesystem. */
if (fxr->file1->f_path.mnt != fxr->file2->f_path.mnt)
return -EXDEV;
if (fxr->flags & ~(XFS_EXCHANGE_RANGE_ALL_FLAGS |
__XFS_EXCHANGE_RANGE_CHECK_FRESH2))
return -EINVAL;
/* Userspace requests only honored for regular files. */
if (S_ISDIR(inode1->i_mode) || S_ISDIR(inode2->i_mode))
return -EISDIR;
if (!S_ISREG(inode1->i_mode) || !S_ISREG(inode2->i_mode))
return -EINVAL;
/* Both files must be opened for read and write. */
if (!(fxr->file1->f_mode & FMODE_READ) ||
!(fxr->file1->f_mode & FMODE_WRITE) ||
!(fxr->file2->f_mode & FMODE_READ) ||
!(fxr->file2->f_mode & FMODE_WRITE))
return -EBADF;
/* Neither file can be opened append-only. */
if ((fxr->file1->f_flags & O_APPEND) ||
(fxr->file2->f_flags & O_APPEND))
return -EBADF;
/*
* If we're not exchanging to EOF, we can check the areas before
* stabilizing both files' i_size.
*/
if (!(fxr->flags & XFS_EXCHANGE_RANGE_TO_EOF)) {
ret = xfs_exchange_range_verify_area(fxr);
if (ret)
return ret;
}
/* Update cmtime if the fd/inode don't forbid it. */
if (!(fxr->file1->f_mode & FMODE_NOCMTIME) && !IS_NOCMTIME(inode1))
fxr->flags |= __XFS_EXCHANGE_RANGE_UPD_CMTIME1;
if (!(fxr->file2->f_mode & FMODE_NOCMTIME) && !IS_NOCMTIME(inode2))
fxr->flags |= __XFS_EXCHANGE_RANGE_UPD_CMTIME2;
file_start_write(fxr->file2);
ret = xfs_exchrange_contents(fxr);
file_end_write(fxr->file2);
if (ret)
return ret;
fsnotify_modify(fxr->file1);
if (fxr->file2 != fxr->file1)
fsnotify_modify(fxr->file2);
return 0;
}
/* Collect exchange-range arguments from userspace. */
long
xfs_ioc_exchange_range(
struct file *file,
struct xfs_exchange_range __user *argp)
{
struct xfs_exchrange fxr = {
.file2 = file,
};
struct xfs_exchange_range args;
struct fd file1;
int error;
if (copy_from_user(&args, argp, sizeof(args)))
return -EFAULT;
if (memchr_inv(&args.pad, 0, sizeof(args.pad)))
return -EINVAL;
if (args.flags & ~XFS_EXCHANGE_RANGE_ALL_FLAGS)
return -EINVAL;
fxr.file1_offset = args.file1_offset;
fxr.file2_offset = args.file2_offset;
fxr.length = args.length;
fxr.flags = args.flags;
file1 = fdget(args.file1_fd);
if (!file1.file)
return -EBADF;
fxr.file1 = file1.file;
error = xfs_exchange_range(&fxr);
fdput(file1);
return error;
}
/* Opaque freshness blob for XFS_IOC_COMMIT_RANGE */
struct xfs_commit_range_fresh {
xfs_fsid_t fsid; /* m_fixedfsid */
__u64 file2_ino; /* inode number */
__s64 file2_mtime; /* modification time */
__s64 file2_ctime; /* change time */
__s32 file2_mtime_nsec; /* mod time, nsec */
__s32 file2_ctime_nsec; /* change time, nsec */
__u32 file2_gen; /* inode generation */
__u32 magic; /* zero */
};
#define XCR_FRESH_MAGIC 0x444F524B /* DORK */
/* Set up a commitrange operation by sampling file2's write-related attrs */
long
xfs_ioc_start_commit(
struct file *file,
struct xfs_commit_range __user *argp)
{
struct xfs_commit_range args = { };
struct timespec64 ts;
struct xfs_commit_range_fresh *kern_f;
struct xfs_commit_range_fresh __user *user_f;
struct inode *inode2 = file_inode(file);
struct xfs_inode *ip2 = XFS_I(inode2);
const unsigned int lockflags = XFS_IOLOCK_SHARED |
XFS_MMAPLOCK_SHARED |
XFS_ILOCK_SHARED;
BUILD_BUG_ON(sizeof(struct xfs_commit_range_fresh) !=
sizeof(args.file2_freshness));
kern_f = (struct xfs_commit_range_fresh *)&args.file2_freshness;
memcpy(&kern_f->fsid, ip2->i_mount->m_fixedfsid, sizeof(xfs_fsid_t));
xfs_ilock(ip2, lockflags);
ts = inode_get_ctime(inode2);
kern_f->file2_ctime = ts.tv_sec;
kern_f->file2_ctime_nsec = ts.tv_nsec;
ts = inode_get_mtime(inode2);
kern_f->file2_mtime = ts.tv_sec;
kern_f->file2_mtime_nsec = ts.tv_nsec;
kern_f->file2_ino = ip2->i_ino;
kern_f->file2_gen = inode2->i_generation;
kern_f->magic = XCR_FRESH_MAGIC;
xfs_iunlock(ip2, lockflags);
user_f = (struct xfs_commit_range_fresh __user *)&argp->file2_freshness;
if (copy_to_user(user_f, kern_f, sizeof(*kern_f)))
return -EFAULT;
return 0;
}
/*
* Exchange file1 and file2 contents if file2 has not been written since the
* start commit operation.
*/
long
xfs_ioc_commit_range(
struct file *file,
struct xfs_commit_range __user *argp)
{
struct xfs_exchrange fxr = {
.file2 = file,
};
struct xfs_commit_range args;
struct xfs_commit_range_fresh *kern_f;
struct xfs_inode *ip2 = XFS_I(file_inode(file));
struct xfs_mount *mp = ip2->i_mount;
struct fd file1;
int error;
kern_f = (struct xfs_commit_range_fresh *)&args.file2_freshness;
if (copy_from_user(&args, argp, sizeof(args)))
return -EFAULT;
if (args.flags & ~XFS_EXCHANGE_RANGE_ALL_FLAGS)
return -EINVAL;
if (kern_f->magic != XCR_FRESH_MAGIC)
return -EBUSY;
if (memcmp(&kern_f->fsid, mp->m_fixedfsid, sizeof(xfs_fsid_t)))
return -EBUSY;
fxr.file1_offset = args.file1_offset;
fxr.file2_offset = args.file2_offset;
fxr.length = args.length;
fxr.flags = args.flags | __XFS_EXCHANGE_RANGE_CHECK_FRESH2;
fxr.file2_ino = kern_f->file2_ino;
fxr.file2_gen = kern_f->file2_gen;
fxr.file2_mtime.tv_sec = kern_f->file2_mtime;
fxr.file2_mtime.tv_nsec = kern_f->file2_mtime_nsec;
fxr.file2_ctime.tv_sec = kern_f->file2_ctime;
fxr.file2_ctime.tv_nsec = kern_f->file2_ctime_nsec;
file1 = fdget(args.file1_fd);
if (!file1.file)
return -EBADF;
fxr.file1 = file1.file;
error = xfs_exchange_range(&fxr);
fdput(file1);
return error;
}