mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 06:01:57 +00:00
08435c2aab
This patch adds the 'advantech_ec_wdt' kernel module which provides WDT support for Advantech platforms with ITE based Embedded Controller. Signed-off-by: Thomas Kastner <thomas.kastner@advantech.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Thomas Kastner <thomas.kastner@advantech.com> Link: https://lore.kernel.org/r/Y0+pl/26e3pcEUPk@EIS-S230 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
206 lines
5.1 KiB
C
206 lines
5.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Advantech Embedded Controller Watchdog Driver
|
|
*
|
|
* This driver supports Advantech products with ITE based Embedded Controller.
|
|
* It does not support Advantech products with other ECs or without EC.
|
|
*
|
|
* Copyright (C) 2022 Advantech Europe B.V.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define DRIVER_NAME "advantech_ec_wdt"
|
|
|
|
/* EC IO region */
|
|
#define EC_BASE_ADDR 0x299
|
|
#define EC_ADDR_EXTENT 2
|
|
|
|
/* EC minimum IO access delay in ms */
|
|
#define EC_MIN_DELAY 10
|
|
|
|
/* EC interface definitions */
|
|
#define EC_ADDR_CMD (EC_BASE_ADDR + 1)
|
|
#define EC_ADDR_DATA EC_BASE_ADDR
|
|
#define EC_CMD_EC_PROBE 0x30
|
|
#define EC_CMD_COMM 0x89
|
|
#define EC_CMD_WDT_START 0x28
|
|
#define EC_CMD_WDT_STOP 0x29
|
|
#define EC_CMD_WDT_RESET 0x2A
|
|
#define EC_DAT_EN_DLY_H 0x58
|
|
#define EC_DAT_EN_DLY_L 0x59
|
|
#define EC_DAT_RST_DLY_H 0x5E
|
|
#define EC_DAT_RST_DLY_L 0x5F
|
|
#define EC_MAGIC 0x95
|
|
|
|
/* module parameters */
|
|
#define MIN_TIME 1
|
|
#define MAX_TIME 6000 /* 100 minutes */
|
|
#define DEFAULT_TIME 60
|
|
|
|
static unsigned int timeout;
|
|
static ktime_t ec_timestamp;
|
|
|
|
module_param(timeout, uint, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Default Watchdog timer setting (" __MODULE_STRING(DEFAULT_TIME) "s). The range is from " __MODULE_STRING(MIN_TIME) " to " __MODULE_STRING(MAX_TIME) ".");
|
|
|
|
static void adv_ec_wdt_timing_gate(void)
|
|
{
|
|
ktime_t time_cur, time_delta;
|
|
|
|
/* ensure minimum delay between IO accesses*/
|
|
time_cur = ktime_get();
|
|
time_delta = ktime_to_ms(ktime_sub(time_cur, ec_timestamp));
|
|
if (time_delta < EC_MIN_DELAY) {
|
|
time_delta = EC_MIN_DELAY - time_delta;
|
|
usleep_range(time_delta * 1000, (time_delta + 1) * 1000);
|
|
}
|
|
ec_timestamp = ktime_get();
|
|
}
|
|
|
|
static void adv_ec_wdt_outb(unsigned char value, unsigned short port)
|
|
{
|
|
adv_ec_wdt_timing_gate();
|
|
outb(value, port);
|
|
}
|
|
|
|
static unsigned char adv_ec_wdt_inb(unsigned short port)
|
|
{
|
|
adv_ec_wdt_timing_gate();
|
|
return inb(port);
|
|
}
|
|
|
|
static int adv_ec_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
adv_ec_wdt_outb(EC_CMD_WDT_RESET, EC_ADDR_CMD);
|
|
return 0;
|
|
}
|
|
|
|
static int adv_ec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* scale time to EC 100 ms base */
|
|
val = t * 10;
|
|
|
|
/* reset enable delay, just in case it was set by BIOS etc. */
|
|
adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
|
|
adv_ec_wdt_outb(EC_DAT_EN_DLY_H, EC_ADDR_DATA);
|
|
adv_ec_wdt_outb(0, EC_ADDR_DATA);
|
|
|
|
adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
|
|
adv_ec_wdt_outb(EC_DAT_EN_DLY_L, EC_ADDR_DATA);
|
|
adv_ec_wdt_outb(0, EC_ADDR_DATA);
|
|
|
|
/* set reset delay */
|
|
adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
|
|
adv_ec_wdt_outb(EC_DAT_RST_DLY_H, EC_ADDR_DATA);
|
|
adv_ec_wdt_outb(val >> 8, EC_ADDR_DATA);
|
|
|
|
adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
|
|
adv_ec_wdt_outb(EC_DAT_RST_DLY_L, EC_ADDR_DATA);
|
|
adv_ec_wdt_outb(val & 0xFF, EC_ADDR_DATA);
|
|
|
|
wdd->timeout = t;
|
|
return 0;
|
|
}
|
|
|
|
static int adv_ec_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
adv_ec_wdt_set_timeout(wdd, wdd->timeout);
|
|
adv_ec_wdt_outb(EC_CMD_WDT_START, EC_ADDR_CMD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv_ec_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
adv_ec_wdt_outb(EC_CMD_WDT_STOP, EC_ADDR_CMD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info adv_ec_wdt_info = {
|
|
.identity = DRIVER_NAME,
|
|
.options = WDIOF_SETTIMEOUT |
|
|
WDIOF_MAGICCLOSE |
|
|
WDIOF_KEEPALIVEPING,
|
|
};
|
|
|
|
static const struct watchdog_ops adv_ec_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = adv_ec_wdt_start,
|
|
.stop = adv_ec_wdt_stop,
|
|
.ping = adv_ec_wdt_ping,
|
|
.set_timeout = adv_ec_wdt_set_timeout,
|
|
};
|
|
|
|
static struct watchdog_device adv_ec_wdt_dev = {
|
|
.info = &adv_ec_wdt_info,
|
|
.ops = &adv_ec_wdt_ops,
|
|
.min_timeout = MIN_TIME,
|
|
.max_timeout = MAX_TIME,
|
|
.timeout = DEFAULT_TIME,
|
|
};
|
|
|
|
static int adv_ec_wdt_probe(struct device *dev, unsigned int id)
|
|
{
|
|
if (!devm_request_region(dev, EC_BASE_ADDR, EC_ADDR_EXTENT, dev_name(dev))) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
EC_BASE_ADDR, EC_BASE_ADDR + EC_ADDR_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
watchdog_init_timeout(&adv_ec_wdt_dev, timeout, dev);
|
|
watchdog_stop_on_reboot(&adv_ec_wdt_dev);
|
|
watchdog_stop_on_unregister(&adv_ec_wdt_dev);
|
|
|
|
return devm_watchdog_register_device(dev, &adv_ec_wdt_dev);
|
|
}
|
|
|
|
static struct isa_driver adv_ec_wdt_driver = {
|
|
.probe = adv_ec_wdt_probe,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init adv_ec_wdt_init(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* quick probe for EC */
|
|
if (!request_region(EC_BASE_ADDR, EC_ADDR_EXTENT, DRIVER_NAME))
|
|
return -EBUSY;
|
|
|
|
adv_ec_wdt_outb(EC_CMD_EC_PROBE, EC_ADDR_CMD);
|
|
val = adv_ec_wdt_inb(EC_ADDR_DATA);
|
|
release_region(EC_BASE_ADDR, EC_ADDR_EXTENT);
|
|
|
|
if (val != EC_MAGIC)
|
|
return -ENODEV;
|
|
|
|
return isa_register_driver(&adv_ec_wdt_driver, 1);
|
|
}
|
|
|
|
static void __exit adv_ec_wdt_exit(void)
|
|
{
|
|
isa_unregister_driver(&adv_ec_wdt_driver);
|
|
}
|
|
|
|
module_init(adv_ec_wdt_init);
|
|
module_exit(adv_ec_wdt_exit);
|
|
|
|
MODULE_AUTHOR("Thomas Kastner <thomas.kastner@advantech.com>");
|
|
MODULE_DESCRIPTION("Advantech Embedded Controller Watchdog Device Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("20221019");
|
|
MODULE_ALIAS("isa:" DRIVER_NAME);
|