linux/drivers/regulator/max8893.c
Uwe Kleine-König aea07a986c
regulator: Drop explicit initialization of struct i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240513080525.2353168-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-27 01:32:50 +01:00

185 lines
4.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
static const struct regulator_ops max8893_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
static const struct regulator_desc max8893_regulators[] = {
{
.name = "BUCK",
.supply_name = "in-buck",
.of_match = of_match_ptr("buck"),
.regulators_node = of_match_ptr("regulators"),
.n_voltages = 0x11,
.id = 6,
.ops = &max8893_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 800000,
.uV_step = 100000,
.vsel_reg = 0x4,
.vsel_mask = 0x1f,
.enable_reg = 0x0,
.enable_mask = BIT(7),
},
{
.name = "LDO1",
.supply_name = "in-ldo1",
.of_match = of_match_ptr("ldo1"),
.regulators_node = of_match_ptr("regulators"),
.n_voltages = 0x12,
.id = 1,
.ops = &max8893_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 1600000,
.uV_step = 100000,
.vsel_reg = 0x5,
.vsel_mask = 0x1f,
.enable_reg = 0x0,
.enable_mask = BIT(5),
},
{
.name = "LDO2",
.supply_name = "in-ldo2",
.of_match = of_match_ptr("ldo2"),
.regulators_node = of_match_ptr("regulators"),
.n_voltages = 0x16,
.id = 2,
.ops = &max8893_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 1200000,
.uV_step = 100000,
.vsel_reg = 0x6,
.vsel_mask = 0x1f,
.enable_reg = 0x0,
.enable_mask = BIT(4),
},
{
.name = "LDO3",
.supply_name = "in-ldo3",
.of_match = of_match_ptr("ldo3"),
.regulators_node = of_match_ptr("regulators"),
.n_voltages = 0x12,
.id = 3,
.ops = &max8893_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 1600000,
.uV_step = 100000,
.vsel_reg = 0x7,
.vsel_mask = 0x1f,
.enable_reg = 0x0,
.enable_mask = BIT(3),
},
{
.name = "LDO4",
.supply_name = "in-ldo4",
.of_match = of_match_ptr("ldo4"),
.regulators_node = of_match_ptr("regulators"),
.n_voltages = 0x1a,
.id = 4,
.ops = &max8893_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 800000,
.uV_step = 100000,
.vsel_reg = 0x8,
.vsel_mask = 0x1f,
.enable_reg = 0x0,
.enable_mask = BIT(2),
},
{
.name = "LDO5",
.supply_name = "in-ldo5",
.of_match = of_match_ptr("ldo5"),
.regulators_node = of_match_ptr("regulators"),
.n_voltages = 0x1a,
.id = 5,
.ops = &max8893_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 800000,
.uV_step = 100000,
.vsel_reg = 0x9,
.vsel_mask = 0x1f,
.enable_reg = 0x0,
.enable_mask = BIT(1),
}
};
static const struct regmap_config max8893_regmap = {
.reg_bits = 8,
.val_bits = 8,
};
static int max8893_probe(struct i2c_client *i2c)
{
int id, ret;
struct regulator_config config = {.dev = &i2c->dev};
struct regmap *regmap = devm_regmap_init_i2c(i2c, &max8893_regmap);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
return ret;
}
for (id = 0; id < ARRAY_SIZE(max8893_regulators); id++) {
struct regulator_dev *rdev;
rdev = devm_regulator_register(&i2c->dev,
&max8893_regulators[id],
&config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&i2c->dev, "failed to register %s: %d\n",
max8893_regulators[id].name, ret);
return ret;
}
}
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id max8893_dt_match[] = {
{ .compatible = "maxim,max8893" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, max8893_dt_match);
#endif
static const struct i2c_device_id max8893_ids[] = {
{ "max8893" },
{ }
};
MODULE_DEVICE_TABLE(i2c, max8893_ids);
static struct i2c_driver max8893_driver = {
.probe = max8893_probe,
.driver = {
.name = "max8893",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(max8893_dt_match),
},
.id_table = max8893_ids,
};
module_i2c_driver(max8893_driver);
MODULE_DESCRIPTION("Maxim MAX8893 PMIC driver");
MODULE_AUTHOR("Sergey Larin <cerg2010cerg2010@mail.ru>");
MODULE_LICENSE("GPL");