mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 06:01:57 +00:00
7f61257cd6
Add a software PWM which toggles a GPIO from a high-resolution timer. This will naturally not be as accurate or as efficient as a hardware PWM, but it is useful in some cases. I have for example used it for evaluating LED brightness handling (via leds-pwm) on a board where the LED was just hooked up to a GPIO, and for a simple verification of the timer frequency on another platform. Since high-resolution timers are used, sleeping GPIO chips are not supported and are rejected in the probe function. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Co-developed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Co-developed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20240604-pwm-gpio-v7-2-6b67cf60db92@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
242 lines
5.6 KiB
C
242 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Generic software PWM for modulating GPIOs
|
|
*
|
|
* Copyright (C) 2020 Axis Communications AB
|
|
* Copyright (C) 2020 Nicola Di Lieto
|
|
* Copyright (C) 2024 Stefan Wahren
|
|
* Copyright (C) 2024 Linus Walleij
|
|
*/
|
|
|
|
#include <linux/cleanup.h>
|
|
#include <linux/container_of.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/hrtimer.h>
|
|
#include <linux/math.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/time.h>
|
|
#include <linux/types.h>
|
|
|
|
struct pwm_gpio {
|
|
struct hrtimer gpio_timer;
|
|
struct gpio_desc *gpio;
|
|
struct pwm_state state;
|
|
struct pwm_state next_state;
|
|
|
|
/* Protect internal state between pwm_ops and hrtimer */
|
|
spinlock_t lock;
|
|
|
|
bool changing;
|
|
bool running;
|
|
bool level;
|
|
};
|
|
|
|
static void pwm_gpio_round(struct pwm_state *dest, const struct pwm_state *src)
|
|
{
|
|
u64 dividend;
|
|
u32 remainder;
|
|
|
|
*dest = *src;
|
|
|
|
/* Round down to hrtimer resolution */
|
|
dividend = dest->period;
|
|
remainder = do_div(dividend, hrtimer_resolution);
|
|
dest->period -= remainder;
|
|
|
|
dividend = dest->duty_cycle;
|
|
remainder = do_div(dividend, hrtimer_resolution);
|
|
dest->duty_cycle -= remainder;
|
|
}
|
|
|
|
static u64 pwm_gpio_toggle(struct pwm_gpio *gpwm, bool level)
|
|
{
|
|
const struct pwm_state *state = &gpwm->state;
|
|
bool invert = state->polarity == PWM_POLARITY_INVERSED;
|
|
|
|
gpwm->level = level;
|
|
gpiod_set_value(gpwm->gpio, gpwm->level ^ invert);
|
|
|
|
if (!state->duty_cycle || state->duty_cycle == state->period) {
|
|
gpwm->running = false;
|
|
return 0;
|
|
}
|
|
|
|
gpwm->running = true;
|
|
return level ? state->duty_cycle : state->period - state->duty_cycle;
|
|
}
|
|
|
|
static enum hrtimer_restart pwm_gpio_timer(struct hrtimer *gpio_timer)
|
|
{
|
|
struct pwm_gpio *gpwm = container_of(gpio_timer, struct pwm_gpio,
|
|
gpio_timer);
|
|
u64 next_toggle;
|
|
bool new_level;
|
|
|
|
guard(spinlock_irqsave)(&gpwm->lock);
|
|
|
|
/* Apply new state at end of current period */
|
|
if (!gpwm->level && gpwm->changing) {
|
|
gpwm->changing = false;
|
|
gpwm->state = gpwm->next_state;
|
|
new_level = !!gpwm->state.duty_cycle;
|
|
} else {
|
|
new_level = !gpwm->level;
|
|
}
|
|
|
|
next_toggle = pwm_gpio_toggle(gpwm, new_level);
|
|
if (next_toggle)
|
|
hrtimer_forward(gpio_timer, hrtimer_get_expires(gpio_timer),
|
|
ns_to_ktime(next_toggle));
|
|
|
|
return next_toggle ? HRTIMER_RESTART : HRTIMER_NORESTART;
|
|
}
|
|
|
|
static int pwm_gpio_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct pwm_gpio *gpwm = pwmchip_get_drvdata(chip);
|
|
bool invert = state->polarity == PWM_POLARITY_INVERSED;
|
|
|
|
if (state->duty_cycle && state->duty_cycle < hrtimer_resolution)
|
|
return -EINVAL;
|
|
|
|
if (state->duty_cycle != state->period &&
|
|
(state->period - state->duty_cycle < hrtimer_resolution))
|
|
return -EINVAL;
|
|
|
|
if (!state->enabled) {
|
|
hrtimer_cancel(&gpwm->gpio_timer);
|
|
} else if (!gpwm->running) {
|
|
int ret;
|
|
|
|
/*
|
|
* This just enables the output, but pwm_gpio_toggle()
|
|
* really starts the duty cycle.
|
|
*/
|
|
ret = gpiod_direction_output(gpwm->gpio, invert);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
guard(spinlock_irqsave)(&gpwm->lock);
|
|
|
|
if (!state->enabled) {
|
|
pwm_gpio_round(&gpwm->state, state);
|
|
gpwm->running = false;
|
|
gpwm->changing = false;
|
|
|
|
gpiod_set_value(gpwm->gpio, invert);
|
|
} else if (gpwm->running) {
|
|
pwm_gpio_round(&gpwm->next_state, state);
|
|
gpwm->changing = true;
|
|
} else {
|
|
unsigned long next_toggle;
|
|
|
|
pwm_gpio_round(&gpwm->state, state);
|
|
gpwm->changing = false;
|
|
|
|
next_toggle = pwm_gpio_toggle(gpwm, !!state->duty_cycle);
|
|
if (next_toggle)
|
|
hrtimer_start(&gpwm->gpio_timer, next_toggle,
|
|
HRTIMER_MODE_REL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_gpio_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct pwm_gpio *gpwm = pwmchip_get_drvdata(chip);
|
|
|
|
guard(spinlock_irqsave)(&gpwm->lock);
|
|
|
|
if (gpwm->changing)
|
|
*state = gpwm->next_state;
|
|
else
|
|
*state = gpwm->state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops pwm_gpio_ops = {
|
|
.apply = pwm_gpio_apply,
|
|
.get_state = pwm_gpio_get_state,
|
|
};
|
|
|
|
static void pwm_gpio_disable_hrtimer(void *data)
|
|
{
|
|
struct pwm_gpio *gpwm = data;
|
|
|
|
hrtimer_cancel(&gpwm->gpio_timer);
|
|
}
|
|
|
|
static int pwm_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pwm_chip *chip;
|
|
struct pwm_gpio *gpwm;
|
|
int ret;
|
|
|
|
chip = devm_pwmchip_alloc(dev, 1, sizeof(*gpwm));
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
|
|
gpwm = pwmchip_get_drvdata(chip);
|
|
|
|
spin_lock_init(&gpwm->lock);
|
|
|
|
gpwm->gpio = devm_gpiod_get(dev, NULL, GPIOD_ASIS);
|
|
if (IS_ERR(gpwm->gpio))
|
|
return dev_err_probe(dev, PTR_ERR(gpwm->gpio),
|
|
"%pfw: could not get gpio\n",
|
|
dev_fwnode(dev));
|
|
|
|
if (gpiod_cansleep(gpwm->gpio))
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"%pfw: sleeping GPIO not supported\n",
|
|
dev_fwnode(dev));
|
|
|
|
chip->ops = &pwm_gpio_ops;
|
|
chip->atomic = true;
|
|
|
|
hrtimer_init(&gpwm->gpio_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
|
ret = devm_add_action_or_reset(dev, pwm_gpio_disable_hrtimer, gpwm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
gpwm->gpio_timer.function = pwm_gpio_timer;
|
|
|
|
ret = pwmchip_add(chip);
|
|
if (ret < 0)
|
|
return dev_err_probe(dev, ret, "could not add pwmchip\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id pwm_gpio_dt_ids[] = {
|
|
{ .compatible = "pwm-gpio" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pwm_gpio_dt_ids);
|
|
|
|
static struct platform_driver pwm_gpio_driver = {
|
|
.driver = {
|
|
.name = "pwm-gpio",
|
|
.of_match_table = pwm_gpio_dt_ids,
|
|
},
|
|
.probe = pwm_gpio_probe,
|
|
};
|
|
module_platform_driver(pwm_gpio_driver);
|
|
|
|
MODULE_DESCRIPTION("PWM GPIO driver");
|
|
MODULE_AUTHOR("Vincent Whitchurch");
|
|
MODULE_LICENSE("GPL");
|