linux/drivers/pinctrl/pinctrl-mcp23s08_i2c.c
Jeff Johnson 5224b7a936 pinctrl: add missing MODULE_DESCRIPTION() macros
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/bcm/pinctrl-bcm4908.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_i2c.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_spi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/meson/pinctrl-meson.o

Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().

This includes many meson drivers which, although they did not produce
a warning with the x86 allmodconfig configuration, may cause this
warning with ARM or ARM64 configurations.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for Amlogic Pinctrl drivers
Link: https://lore.kernel.org/r/20240610-md-drivers-pinctrl-v1-1-68462e3d960c@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17 10:59:31 +02:00

116 lines
2.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* MCP23S08 I2C GPIO driver */
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include "pinctrl-mcp23s08.h"
static int mcp230xx_probe(struct i2c_client *client)
{
const struct mcp23s08_info *info;
struct device *dev = &client->dev;
struct mcp23s08 *mcp;
int ret;
mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
if (!mcp)
return -ENOMEM;
info = i2c_get_match_data(client);
if (!info)
return dev_err_probe(dev, -EINVAL, "invalid device type\n");
mcp->reg_shift = info->reg_shift;
mcp->chip.ngpio = info->ngpio;
mcp->chip.label = info->label;
mcp->regmap = devm_regmap_init_i2c(client, info->regmap);
if (IS_ERR(mcp->regmap))
return PTR_ERR(mcp->regmap);
mcp->irq = client->irq;
mcp->pinctrl_desc.name = "mcp23xxx-pinctrl";
ret = mcp23s08_probe_one(mcp, dev, client->addr, info->type, -1);
if (ret)
return ret;
i2c_set_clientdata(client, mcp);
return 0;
}
static const struct mcp23s08_info mcp23008_i2c = {
.regmap = &mcp23x08_regmap,
.label = "mcp23008",
.type = MCP_TYPE_008,
.ngpio = 8,
.reg_shift = 0,
};
static const struct mcp23s08_info mcp23017_i2c = {
.regmap = &mcp23x17_regmap,
.label = "mcp23017",
.type = MCP_TYPE_017,
.ngpio = 16,
.reg_shift = 1,
};
static const struct mcp23s08_info mcp23018_i2c = {
.regmap = &mcp23x17_regmap,
.label = "mcp23018",
.type = MCP_TYPE_018,
.ngpio = 16,
.reg_shift = 1,
};
static const struct i2c_device_id mcp230xx_id[] = {
{ "mcp23008", (kernel_ulong_t)&mcp23008_i2c },
{ "mcp23017", (kernel_ulong_t)&mcp23017_i2c },
{ "mcp23018", (kernel_ulong_t)&mcp23018_i2c },
{ }
};
MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
static const struct of_device_id mcp23s08_i2c_of_match[] = {
{ .compatible = "microchip,mcp23008", .data = &mcp23008_i2c },
{ .compatible = "microchip,mcp23017", .data = &mcp23017_i2c },
{ .compatible = "microchip,mcp23018", .data = &mcp23018_i2c },
/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
{ .compatible = "mcp,mcp23008", .data = &mcp23008_i2c },
{ .compatible = "mcp,mcp23017", .data = &mcp23017_i2c },
{ }
};
MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
static struct i2c_driver mcp230xx_driver = {
.driver = {
.name = "mcp230xx",
.of_match_table = mcp23s08_i2c_of_match,
},
.probe = mcp230xx_probe,
.id_table = mcp230xx_id,
};
static int __init mcp23s08_i2c_init(void)
{
return i2c_add_driver(&mcp230xx_driver);
}
/*
* Register after I²C postcore initcall and before
* subsys initcalls that may rely on these GPIOs.
*/
subsys_initcall(mcp23s08_i2c_init);
static void mcp23s08_i2c_exit(void)
{
i2c_del_driver(&mcp230xx_driver);
}
module_exit(mcp23s08_i2c_exit);
MODULE_DESCRIPTION("MCP23S08 I2C GPIO driver");
MODULE_LICENSE("GPL");