linux/drivers/irqchip/irq-riscv-imsic-early.c
Sunil V L fbe826b1c1 irqchip/riscv-imsic: Add ACPI support
RISC-V IMSIC interrupt controller provides IPI and MSI support.
Currently, DT based drivers setup the IPI feature early during boot but
defer setting up the MSI functionality. However, in ACPI systems, PCI
subsystem is probed early and assume MSI controller is already setup.
Hence, both IPI and MSI features need to be initialized early itself.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-16-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-27 15:48:36 +02:00

264 lines
6.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021 Western Digital Corporation or its affiliates.
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
#define pr_fmt(fmt) "riscv-imsic: " fmt
#include <linux/acpi.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqchip/riscv-imsic.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include "irq-riscv-imsic-state.h"
static int imsic_parent_irq;
#ifdef CONFIG_SMP
static void imsic_ipi_send(unsigned int cpu)
{
struct imsic_local_config *local = per_cpu_ptr(imsic->global.local, cpu);
writel_relaxed(IMSIC_IPI_ID, local->msi_va);
}
static void imsic_ipi_starting_cpu(void)
{
/* Enable IPIs for current CPU. */
__imsic_id_set_enable(IMSIC_IPI_ID);
}
static void imsic_ipi_dying_cpu(void)
{
/* Disable IPIs for current CPU. */
__imsic_id_clear_enable(IMSIC_IPI_ID);
}
static int __init imsic_ipi_domain_init(void)
{
int virq;
/* Create IMSIC IPI multiplexing */
virq = ipi_mux_create(IMSIC_NR_IPI, imsic_ipi_send);
if (virq <= 0)
return virq < 0 ? virq : -ENOMEM;
/* Set vIRQ range */
riscv_ipi_set_virq_range(virq, IMSIC_NR_IPI);
/* Announce that IMSIC is providing IPIs */
pr_info("%pfwP: providing IPIs using interrupt %d\n", imsic->fwnode, IMSIC_IPI_ID);
return 0;
}
#else
static void imsic_ipi_starting_cpu(void) { }
static void imsic_ipi_dying_cpu(void) { }
static int __init imsic_ipi_domain_init(void) { return 0; }
#endif
/*
* To handle an interrupt, we read the TOPEI CSR and write zero in one
* instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to
* Linux interrupt number and let Linux IRQ subsystem handle it.
*/
static void imsic_handle_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
int err, cpu = smp_processor_id();
struct imsic_vector *vec;
unsigned long local_id;
chained_irq_enter(chip, desc);
while ((local_id = csr_swap(CSR_TOPEI, 0))) {
local_id >>= TOPEI_ID_SHIFT;
if (local_id == IMSIC_IPI_ID) {
if (IS_ENABLED(CONFIG_SMP))
ipi_mux_process();
continue;
}
if (unlikely(!imsic->base_domain))
continue;
vec = imsic_vector_from_local_id(cpu, local_id);
if (!vec) {
pr_warn_ratelimited("vector not found for local ID 0x%lx\n", local_id);
continue;
}
err = generic_handle_domain_irq(imsic->base_domain, vec->hwirq);
if (unlikely(err))
pr_warn_ratelimited("hwirq 0x%x mapping not found\n", vec->hwirq);
}
chained_irq_exit(chip, desc);
}
static int imsic_starting_cpu(unsigned int cpu)
{
/* Mark per-CPU IMSIC state as online */
imsic_state_online();
/* Enable per-CPU parent interrupt */
enable_percpu_irq(imsic_parent_irq, irq_get_trigger_type(imsic_parent_irq));
/* Setup IPIs */
imsic_ipi_starting_cpu();
/*
* Interrupts identities might have been enabled/disabled while
* this CPU was not running so sync-up local enable/disable state.
*/
imsic_local_sync_all();
/* Enable local interrupt delivery */
imsic_local_delivery(true);
return 0;
}
static int imsic_dying_cpu(unsigned int cpu)
{
/* Cleanup IPIs */
imsic_ipi_dying_cpu();
/* Mark per-CPU IMSIC state as offline */
imsic_state_offline();
return 0;
}
static int __init imsic_early_probe(struct fwnode_handle *fwnode)
{
struct irq_domain *domain;
int rc;
/* Find parent domain and register chained handler */
domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), DOMAIN_BUS_ANY);
if (!domain) {
pr_err("%pfwP: Failed to find INTC domain\n", fwnode);
return -ENOENT;
}
imsic_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
if (!imsic_parent_irq) {
pr_err("%pfwP: Failed to create INTC mapping\n", fwnode);
return -ENOENT;
}
/* Initialize IPI domain */
rc = imsic_ipi_domain_init();
if (rc) {
pr_err("%pfwP: Failed to initialize IPI domain\n", fwnode);
return rc;
}
/* Setup chained handler to the parent domain interrupt */
irq_set_chained_handler(imsic_parent_irq, imsic_handle_irq);
/*
* Setup cpuhp state (must be done after setting imsic_parent_irq)
*
* Don't disable per-CPU IMSIC file when CPU goes offline
* because this affects IPI and the masking/unmasking of
* virtual IPIs is done via generic IPI-Mux
*/
cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_IMSIC_STARTING, "irqchip/riscv/imsic:starting",
imsic_starting_cpu, imsic_dying_cpu);
return 0;
}
static int __init imsic_early_dt_init(struct device_node *node, struct device_node *parent)
{
struct fwnode_handle *fwnode = &node->fwnode;
int rc;
/* Setup IMSIC state */
rc = imsic_setup_state(fwnode, NULL);
if (rc) {
pr_err("%pfwP: failed to setup state (error %d)\n", fwnode, rc);
return rc;
}
/* Do early setup of IPIs */
rc = imsic_early_probe(fwnode);
if (rc)
return rc;
/* Ensure that OF platform device gets probed */
of_node_clear_flag(node, OF_POPULATED);
return 0;
}
IRQCHIP_DECLARE(riscv_imsic, "riscv,imsics", imsic_early_dt_init);
#ifdef CONFIG_ACPI
static struct fwnode_handle *imsic_acpi_fwnode;
struct fwnode_handle *imsic_acpi_get_fwnode(struct device *dev)
{
return imsic_acpi_fwnode;
}
static int __init imsic_early_acpi_init(union acpi_subtable_headers *header,
const unsigned long end)
{
struct acpi_madt_imsic *imsic = (struct acpi_madt_imsic *)header;
int rc;
imsic_acpi_fwnode = irq_domain_alloc_named_fwnode("imsic");
if (!imsic_acpi_fwnode) {
pr_err("unable to allocate IMSIC FW node\n");
return -ENOMEM;
}
/* Setup IMSIC state */
rc = imsic_setup_state(imsic_acpi_fwnode, imsic);
if (rc) {
pr_err("%pfwP: failed to setup state (error %d)\n", imsic_acpi_fwnode, rc);
return rc;
}
/* Do early setup of IMSIC state and IPIs */
rc = imsic_early_probe(imsic_acpi_fwnode);
if (rc) {
irq_domain_free_fwnode(imsic_acpi_fwnode);
imsic_acpi_fwnode = NULL;
return rc;
}
rc = imsic_platform_acpi_probe(imsic_acpi_fwnode);
#ifdef CONFIG_PCI
if (!rc)
pci_msi_register_fwnode_provider(&imsic_acpi_get_fwnode);
#endif
if (rc)
pr_err("%pfwP: failed to register IMSIC for MSI functionality (error %d)\n",
imsic_acpi_fwnode, rc);
/*
* Even if imsic_platform_acpi_probe() fails, the IPI part of IMSIC can
* continue to work. So, no need to return failure. This is similar to
* DT where IPI works but MSI probe fails for some reason.
*/
return 0;
}
IRQCHIP_ACPI_DECLARE(riscv_imsic, ACPI_MADT_TYPE_IMSIC, NULL,
1, imsic_early_acpi_init);
#endif