Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-09-20 06:53:04 +00:00
Code Issues Packages Projects Releases Wiki Activity
master
linux/drivers/hwmon/lm75.c
Andrew Davis 5178911d5c hwmon: (lm75) Remove use of i2c_match_id() 
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-14-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00

1030 lines
25 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* lm75.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/util_macros.h>
#include <linux/regulator/consumer.h>
#include "lm75.h"
/*
* This driver handles the LM75 and compatible digital temperature sensors.
*/
enum lm75_type { /* keep sorted in alphabetical order */
adt75,
as6200,
at30ts74,
ds1775,
ds75,
ds7505,
g751,
lm75,
lm75a,
lm75b,
max6625,
max6626,
max31725,
mcp980x,
pct2075,
stds75,
stlm75,
tcn75,
tmp100,
tmp101,
tmp105,
tmp112,
tmp175,
tmp275,
tmp75,
tmp75b,
tmp75c,
tmp1075,
};
/**
* struct lm75_params - lm75 configuration parameters.
* @config_reg_16bits: Configure register size is 2 bytes.
* @set_mask: Bits to set in configuration register when configuring
* the chip.
* @clr_mask: Bits to clear in configuration register when configuring
* the chip.
* @default_resolution: Default number of bits to represent the temperature
* value.
* @resolution_limits: Limit register resolution. Optional. Should be set if
* the resolution of limit registers does not match the
* resolution of the temperature register.
* @resolutions: List of resolutions associated with sample times.
* Optional. Should be set if num_sample_times is larger
* than 1, and if the resolution changes with sample times.
* If set, number of entries must match num_sample_times.
* @default_sample_time:Sample time to be set by default.
* @num_sample_times: Number of possible sample times to be set. Optional.
* Should be set if the number of sample times is larger
* than one.
* @sample_times: All the possible sample times to be set. Mandatory if
* num_sample_times is larger than 1. If set, number of
* entries must match num_sample_times.
* @alarm: Alarm bit is supported.
*/
struct lm75_params {
bool config_reg_16bits;
u16 set_mask;
u16 clr_mask;
u8 default_resolution;
u8 resolution_limits;
const u8 *resolutions;
unsigned int default_sample_time;
u8 num_sample_times;
const unsigned int *sample_times;
bool alarm;
};
/* Addresses scanned */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* The LM75 registers */
#define LM75_REG_TEMP 0x00
#define LM75_REG_CONF 0x01
#define LM75_REG_HYST 0x02
#define LM75_REG_MAX 0x03
#define PCT2075_REG_IDLE 0x04
/* Each client has this additional data */
struct lm75_data {
struct i2c_client *client;
struct regmap *regmap;
struct regulator *vs;
u16 orig_conf;
u16 current_conf;
u8 resolution; /* In bits, 9 to 16 */
unsigned int sample_time; /* In ms */
enum lm75_type kind;
const struct lm75_params *params;
};
/*-----------------------------------------------------------------------*/
static const u8 lm75_sample_set_masks[] = { 0 << 5, 1 << 5, 2 << 5, 3 << 5 };
#define LM75_SAMPLE_CLEAR_MASK (3 << 5)
/* The structure below stores the configuration values of the supported devices.
* In case of being supported multiple configurations, the default one must
* always be the first element of the array
*/
static const struct lm75_params device_params[] = {
[adt75] = {
.clr_mask = 1 << 5, /* not one-shot mode */
.default_resolution = 12,
.default_sample_time = MSEC_PER_SEC / 10,
},
[as6200] = {
.config_reg_16bits = true,
.set_mask = 0x94C0, /* 8 sample/s, 4 CF, positive polarity */
.default_resolution = 12,
.default_sample_time = 125,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 125, 250, 1000, 4000 },
.alarm = true,
},
[at30ts74] = {
.set_mask = 3 << 5, /* 12-bit mode*/
.default_resolution = 12,
.default_sample_time = 200,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 25, 50, 100, 200 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[ds1775] = {
.clr_mask = 3 << 5,
.set_mask = 2 << 5, /* 11-bit mode */
.default_resolution = 11,
.default_sample_time = 500,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 125, 250, 500, 1000 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[ds75] = {
.clr_mask = 3 << 5,
.set_mask = 2 << 5, /* 11-bit mode */
.default_resolution = 11,
.default_sample_time = 600,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 150, 300, 600, 1200 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[stds75] = {
.clr_mask = 3 << 5,
.set_mask = 2 << 5, /* 11-bit mode */
.default_resolution = 11,
.default_sample_time = 600,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 150, 300, 600, 1200 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[stlm75] = {
.default_resolution = 9,
.default_sample_time = MSEC_PER_SEC / 6,
},
[ds7505] = {
.set_mask = 3 << 5, /* 12-bit mode*/
.default_resolution = 12,
.default_sample_time = 200,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 25, 50, 100, 200 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[g751] = {
.default_resolution = 9,
.default_sample_time = MSEC_PER_SEC / 10,
},
[lm75] = {
.default_resolution = 9,
.default_sample_time = MSEC_PER_SEC / 10,
},
[lm75a] = {
.default_resolution = 9,
.default_sample_time = MSEC_PER_SEC / 10,
},
[lm75b] = {
.default_resolution = 11,
.default_sample_time = MSEC_PER_SEC / 10,
},
[max6625] = {
.default_resolution = 9,
.default_sample_time = MSEC_PER_SEC / 7,
},
[max6626] = {
.default_resolution = 12,
.default_sample_time = MSEC_PER_SEC / 7,
.resolution_limits = 9,
},
[max31725] = {
.default_resolution = 16,
.default_sample_time = MSEC_PER_SEC / 20,
},
[tcn75] = {
.default_resolution = 9,
.default_sample_time = MSEC_PER_SEC / 18,
},
[pct2075] = {
.default_resolution = 11,
.default_sample_time = MSEC_PER_SEC / 10,
.num_sample_times = 31,
.sample_times = (unsigned int []){ 100, 200, 300, 400, 500, 600,
700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700,
1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700,
2800, 2900, 3000, 3100 },
},
[mcp980x] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode */
.default_resolution = 12,
.resolution_limits = 9,
.default_sample_time = 240,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 30, 60, 120, 240 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp100] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode */
.default_resolution = 12,
.default_sample_time = 320,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 40, 80, 160, 320 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp101] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode */
.default_resolution = 12,
.default_sample_time = 320,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 40, 80, 160, 320 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp105] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode*/
.default_resolution = 12,
.default_sample_time = 220,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 28, 55, 110, 220 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp112] = {
.config_reg_16bits = true,
.set_mask = 0x60C0, /* 12-bit mode, 8 samples / second */
.clr_mask = 1 << 15, /* no one-shot mode*/
.default_resolution = 12,
.default_sample_time = 125,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 125, 250, 1000, 4000 },
},
[tmp175] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode*/
.default_resolution = 12,
.default_sample_time = 220,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 28, 55, 110, 220 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp275] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode*/
.default_resolution = 12,
.default_sample_time = 220,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 28, 55, 110, 220 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp75] = {
.set_mask = 3 << 5, /* 12-bit mode */
.clr_mask = 1 << 7, /* not one-shot mode*/
.default_resolution = 12,
.default_sample_time = 220,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 28, 55, 110, 220 },
.resolutions = (u8 []) {9, 10, 11, 12 },
},
[tmp75b] = { /* not one-shot mode, Conversion rate 37Hz */
.clr_mask = 1 << 7 | 3 << 5,
.default_resolution = 12,
.default_sample_time = MSEC_PER_SEC / 37,
.sample_times = (unsigned int []){ MSEC_PER_SEC / 37,
MSEC_PER_SEC / 18,
MSEC_PER_SEC / 9, MSEC_PER_SEC / 4 },
.num_sample_times = 4,
},
[tmp75c] = {
.clr_mask = 1 << 5, /*not one-shot mode*/
.default_resolution = 12,
.default_sample_time = MSEC_PER_SEC / 12,
},
[tmp1075] = { /* not one-shot mode, 27.5 ms sample rate */
.clr_mask = 1 << 5 | 1 << 6 | 1 << 7,
.default_resolution = 12,
.default_sample_time = 28,
.num_sample_times = 4,
.sample_times = (unsigned int []){ 28, 55, 110, 220 },
}
};
static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
{
return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
}
static int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
unsigned int value;
clr_mask |= LM75_SHUTDOWN << (8 * data->params->config_reg_16bits);
value = data->current_conf & ~clr_mask;
value |= set_mask;
if (data->current_conf != value) {
s32 err;
if (data->params->config_reg_16bits)
err = regmap_write(data->regmap, LM75_REG_CONF, value);
else
err = i2c_smbus_write_byte_data(data->client,
LM75_REG_CONF,
value);
if (err)
return err;
data->current_conf = value;
}
return 0;
}
static int lm75_read_config(struct lm75_data *data)
{
int ret;
unsigned int status;
if (data->params->config_reg_16bits) {
ret = regmap_read(data->regmap, LM75_REG_CONF, &status);
return ret ? ret : status;
}
return i2c_smbus_read_byte_data(data->client, LM75_REG_CONF);
}
static irqreturn_t lm75_alarm_handler(int irq, void *private)
{
struct device *hwmon_dev = private;
hwmon_notify_event(hwmon_dev, hwmon_temp, hwmon_temp_alarm, 0);
return IRQ_HANDLED;
}
static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct lm75_data *data = dev_get_drvdata(dev);
unsigned int regval;
int err, reg;
switch (type) {
case hwmon_chip:
switch (attr) {
case hwmon_chip_update_interval:
*val = data->sample_time;
break;
default:
return -EINVAL;
}
break;
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
reg = LM75_REG_TEMP;
break;
case hwmon_temp_max:
reg = LM75_REG_MAX;
break;
case hwmon_temp_max_hyst:
reg = LM75_REG_HYST;
break;
case hwmon_temp_alarm:
reg = LM75_REG_CONF;
break;
default:
return -EINVAL;
}
err = regmap_read(data->regmap, reg, &regval);
if (err < 0)
return err;
if (attr == hwmon_temp_alarm) {
switch (data->kind) {
case as6200:
*val = (regval >> 5) & 0x1;
break;
default:
return -EINVAL;
}
} else {
*val = lm75_reg_to_mc(regval, data->resolution);
}
break;
default:
return -EINVAL;
}
return 0;
}
static int lm75_write_temp(struct device *dev, u32 attr, long temp)
{
struct lm75_data *data = dev_get_drvdata(dev);
u8 resolution;
int reg;
switch (attr) {
case hwmon_temp_max:
reg = LM75_REG_MAX;
break;
case hwmon_temp_max_hyst:
reg = LM75_REG_HYST;
break;
default:
return -EINVAL;
}
/*
* Resolution of limit registers is assumed to be the same as the
* temperature input register resolution unless given explicitly.
*/
if (data->params->resolution_limits)
resolution = data->params->resolution_limits;
else
resolution = data->resolution;
temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
1000) << (16 - resolution);
return regmap_write(data->regmap, reg, (u16)temp);
}
static int lm75_update_interval(struct device *dev, long val)
{
struct lm75_data *data = dev_get_drvdata(dev);
unsigned int reg;
u8 index;
s32 err;
index = find_closest(val, data->params->sample_times,
(int)data->params->num_sample_times);
switch (data->kind) {
default:
err = lm75_write_config(data, lm75_sample_set_masks[index],
LM75_SAMPLE_CLEAR_MASK);
if (err)
return err;
data->sample_time = data->params->sample_times[index];
if (data->params->resolutions)
data->resolution = data->params->resolutions[index];
break;
case tmp112:
case as6200:
err = regmap_read(data->regmap, LM75_REG_CONF, &reg);
if (err < 0)
return err;
reg &= ~0x00c0;
reg |= (3 - index) << 6;
err = regmap_write(data->regmap, LM75_REG_CONF, reg);
if (err < 0)
return err;
data->sample_time = data->params->sample_times[index];
break;
case pct2075:
err = i2c_smbus_write_byte_data(data->client, PCT2075_REG_IDLE,
index + 1);
if (err)
return err;
data->sample_time = data->params->sample_times[index];
break;
}
return 0;
}
static int lm75_write_chip(struct device *dev, u32 attr, long val)
{
switch (attr) {
case hwmon_chip_update_interval:
return lm75_update_interval(dev, val);
default:
return -EINVAL;
}
return 0;
}
static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
switch (type) {
case hwmon_chip:
return lm75_write_chip(dev, attr, val);
case hwmon_temp:
return lm75_write_temp(dev, attr, val);
default:
return -EINVAL;
}
return 0;
}
static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
const struct lm75_data *config_data = data;
switch (type) {
case hwmon_chip:
switch (attr) {
case hwmon_chip_update_interval:
if (config_data->params->num_sample_times > 1)
return 0644;
return 0444;
}
break;
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
return 0444;
case hwmon_temp_max:
case hwmon_temp_max_hyst:
return 0644;
case hwmon_temp_alarm:
if (config_data->params->alarm)
return 0444;
break;
}
break;
default:
break;
}
return 0;
}
static const struct hwmon_channel_info * const lm75_info[] = {
HWMON_CHANNEL_INFO(chip,
HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
HWMON_T_ALARM),
NULL
};
static const struct hwmon_ops lm75_hwmon_ops = {
.is_visible = lm75_is_visible,
.read = lm75_read,
.write = lm75_write,
};
static const struct hwmon_chip_info lm75_chip_info = {
.ops = &lm75_hwmon_ops,
.info = lm75_info,
};
static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg)
{
return reg != LM75_REG_TEMP;
}
static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
{
return reg == LM75_REG_TEMP || reg == LM75_REG_CONF;
}
static const struct regmap_config lm75_regmap_config = {
.reg_bits = 8,
.val_bits = 16,
.max_register = PCT2075_REG_IDLE,
.writeable_reg = lm75_is_writeable_reg,
.volatile_reg = lm75_is_volatile_reg,
.val_format_endian = REGMAP_ENDIAN_BIG,
.cache_type = REGCACHE_MAPLE,
.use_single_read = true,
.use_single_write = true,
};
static void lm75_disable_regulator(void *data)
{
struct lm75_data *lm75 = data;
regulator_disable(lm75->vs);
}
static void lm75_remove(void *data)
{
struct lm75_data *lm75 = data;
struct i2c_client *client = lm75->client;
i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
}
static int lm75_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct lm75_data *data;
int status, err;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
return -EIO;
data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
data->kind = (uintptr_t)i2c_get_match_data(client);
data->vs = devm_regulator_get(dev, "vs");
if (IS_ERR(data->vs))
return PTR_ERR(data->vs);
data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
if (IS_ERR(data->regmap))
return PTR_ERR(data->regmap);
/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
* Then tweak to be more precise when appropriate.
*/
data->params = &device_params[data->kind];
/* Save default sample time and resolution*/
data->sample_time = data->params->default_sample_time;
data->resolution = data->params->default_resolution;
/* Enable the power */
err = regulator_enable(data->vs);
if (err) {
dev_err(dev, "failed to enable regulator: %d\n", err);
return err;
}
err = devm_add_action_or_reset(dev, lm75_disable_regulator, data);
if (err)
return err;
/* Cache original configuration */
status = lm75_read_config(data);
if (status < 0) {
dev_dbg(dev, "Can't read config? %d\n", status);
return status;
}
data->orig_conf = status;
data->current_conf = status;
err = lm75_write_config(data, data->params->set_mask,
data->params->clr_mask);
if (err)
return err;
err = devm_add_action_or_reset(dev, lm75_remove, data);
if (err)
return err;
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data, &lm75_chip_info,
NULL);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
if (client->irq) {
if (data->params->alarm) {
err = devm_request_threaded_irq(dev,
client->irq,
NULL,
&lm75_alarm_handler,
IRQF_ONESHOT,
client->name,
hwmon_dev);
if (err)
return err;
} else {
/* alarm is only supported for chips with alarm bit */
dev_err(dev, "alarm interrupt is not supported\n");
}
}
dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);
return 0;
}
static const struct i2c_device_id lm75_ids[] = {
{ "adt75", adt75, },
{ "as6200", as6200, },
{ "at30ts74", at30ts74, },
{ "ds1775", ds1775, },
{ "ds75", ds75, },
{ "ds7505", ds7505, },
{ "g751", g751, },
{ "lm75", lm75, },
{ "lm75a", lm75a, },
{ "lm75b", lm75b, },
{ "max6625", max6625, },
{ "max6626", max6626, },
{ "max31725", max31725, },
{ "max31726", max31725, },
{ "mcp980x", mcp980x, },
{ "pct2075", pct2075, },
{ "stds75", stds75, },
{ "stlm75", stlm75, },
{ "tcn75", tcn75, },
{ "tmp100", tmp100, },
{ "tmp101", tmp101, },
{ "tmp105", tmp105, },
{ "tmp112", tmp112, },
{ "tmp175", tmp175, },
{ "tmp275", tmp275, },
{ "tmp75", tmp75, },
{ "tmp75b", tmp75b, },
{ "tmp75c", tmp75c, },
{ "tmp1075", tmp1075, },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, lm75_ids);
static const struct of_device_id __maybe_unused lm75_of_match[] = {
{
.compatible = "adi,adt75",
.data = (void *)adt75
},
{
.compatible = "ams,as6200",
.data = (void *)as6200
},
{
.compatible = "atmel,at30ts74",
.data = (void *)at30ts74
},
{
.compatible = "dallas,ds1775",
.data = (void *)ds1775
},
{
.compatible = "dallas,ds75",
.data = (void *)ds75
},
{
.compatible = "dallas,ds7505",
.data = (void *)ds7505
},
{
.compatible = "gmt,g751",
.data = (void *)g751
},
{
.compatible = "national,lm75",
.data = (void *)lm75
},
{
.compatible = "national,lm75a",
.data = (void *)lm75a
},
{
.compatible = "national,lm75b",
.data = (void *)lm75b
},
{
.compatible = "maxim,max6625",
.data = (void *)max6625
},
{
.compatible = "maxim,max6626",
.data = (void *)max6626
},
{
.compatible = "maxim,max31725",
.data = (void *)max31725
},
{
.compatible = "maxim,max31726",
.data = (void *)max31725
},
{
.compatible = "maxim,mcp980x",
.data = (void *)mcp980x
},
{
.compatible = "nxp,pct2075",
.data = (void *)pct2075
},
{
.compatible = "st,stds75",
.data = (void *)stds75
},
{
.compatible = "st,stlm75",
.data = (void *)stlm75
},
{
.compatible = "microchip,tcn75",
.data = (void *)tcn75
},
{
.compatible = "ti,tmp100",
.data = (void *)tmp100
},
{
.compatible = "ti,tmp101",
.data = (void *)tmp101
},
{
.compatible = "ti,tmp105",
.data = (void *)tmp105
},
{
.compatible = "ti,tmp112",
.data = (void *)tmp112
},
{
.compatible = "ti,tmp175",
.data = (void *)tmp175
},
{
.compatible = "ti,tmp275",
.data = (void *)tmp275
},
{
.compatible = "ti,tmp75",
.data = (void *)tmp75
},
{
.compatible = "ti,tmp75b",
.data = (void *)tmp75b
},
{
.compatible = "ti,tmp75c",
.data = (void *)tmp75c
},
{
.compatible = "ti,tmp1075",
.data = (void *)tmp1075
},
{ },
};
MODULE_DEVICE_TABLE(of, lm75_of_match);
#define LM75A_ID 0xA1
/* Return 0 if detection is successful, -ENODEV otherwise */
static int lm75_detect(struct i2c_client *new_client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
int i;
int conf, hyst, os;
bool is_lm75a = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
/*
* Now, we do the remaining detection. There is no identification-
* dedicated register so we have to rely on several tricks:
* unused bits, registers cycling over 8-address boundaries,
* addresses 0x04-0x07 returning the last read value.
* The cycling+unused addresses combination is not tested,
* since it would significantly slow the detection down and would
* hardly add any value.
*
* The National Semiconductor LM75A is different than earlier
* LM75s. It has an ID byte of 0xaX (where X is the chip
* revision, with 1 being the only revision in existence) in
* register 7, and unused registers return 0xff rather than the
* last read value.
*
* Note that this function only detects the original National
* Semiconductor LM75 and the LM75A. Clones from other vendors
* aren't detected, on purpose, because they are typically never
* found on PC hardware. They are found on embedded designs where
* they can be instantiated explicitly so detection is not needed.
* The absence of identification registers on all these clones
* would make their exhaustive detection very difficult and weak,
* and odds are that the driver would bind to unsupported devices.
*/
/* Unused bits */
conf = i2c_smbus_read_byte_data(new_client, 1);
if (conf & 0xe0)
return -ENODEV;
/* First check for LM75A */
if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
/*
* LM75A returns 0xff on unused registers so
* just to be sure we check for that too.
*/
if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
|| i2c_smbus_read_byte_data(new_client, 5) != 0xff
|| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
return -ENODEV;
is_lm75a = 1;
hyst = i2c_smbus_read_byte_data(new_client, 2);
os = i2c_smbus_read_byte_data(new_client, 3);
} else { /* Traditional style LM75 detection */
/* Unused addresses */
hyst = i2c_smbus_read_byte_data(new_client, 2);
if (i2c_smbus_read_byte_data(new_client, 4) != hyst
|| i2c_smbus_read_byte_data(new_client, 5) != hyst
|| i2c_smbus_read_byte_data(new_client, 6) != hyst
|| i2c_smbus_read_byte_data(new_client, 7) != hyst)
return -ENODEV;
os = i2c_smbus_read_byte_data(new_client, 3);
if (i2c_smbus_read_byte_data(new_client, 4) != os
|| i2c_smbus_read_byte_data(new_client, 5) != os
|| i2c_smbus_read_byte_data(new_client, 6) != os
|| i2c_smbus_read_byte_data(new_client, 7) != os)
return -ENODEV;
}
/*
* It is very unlikely that this is a LM75 if both
* hysteresis and temperature limit registers are 0.
*/
if (hyst == 0 && os == 0)
return -ENODEV;
/* Addresses cycling */
for (i = 8; i <= 248; i += 40) {
if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
|| i2c_smbus_read_byte_data(new_client, i + 2) != hyst
|| i2c_smbus_read_byte_data(new_client, i + 3) != os)
return -ENODEV;
if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
!= LM75A_ID)
return -ENODEV;
}
strscpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);
return 0;
}
#ifdef CONFIG_PM
static int lm75_suspend(struct device *dev)
{
int status;
struct i2c_client *client = to_i2c_client(dev);
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", status);
return status;
}
status = status | LM75_SHUTDOWN;
i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
return 0;
}
static int lm75_resume(struct device *dev)
{
int status;
struct i2c_client *client = to_i2c_client(dev);
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", status);
return status;
}
status = status & ~LM75_SHUTDOWN;
i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
return 0;
}
static const struct dev_pm_ops lm75_dev_pm_ops = {
.suspend = lm75_suspend,
.resume = lm75_resume,
};
#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
#else
#define LM75_DEV_PM_OPS NULL
#endif /* CONFIG_PM */
static struct i2c_driver lm75_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "lm75",
.of_match_table = of_match_ptr(lm75_of_match),
.pm = LM75_DEV_PM_OPS,
},
.probe = lm75_probe,
.id_table = lm75_ids,
.detect = lm75_detect,
.address_list = normal_i2c,
};
module_i2c_driver(lm75_driver);
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
MODULE_DESCRIPTION("LM75 driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink