Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-13 23:51:39 +00:00
Code Issues Packages Projects Releases Wiki Activity
master
linux/drivers/comedi/drivers/dmm32at.c
Ian Abbott 5c57b1ccec comedi: comedi_8255: Rework subdevice initialization functions 
Comedi drivers can initialize an 8255 subdevice in I/O space by calling
`subdev_8255_init()`, or in memory-mapped I/O space by calling
`subdev_8255_mm_init()`, or by supplying a call-back function pointer
and context to either of those functions.  Change it so that a new
function `subdev_8255_cb_init()` shall be called instead when supplying
a callback function and context, and remove the call-back function
parameter from `subdev_8255_init()` and `subdev_8255_mm_init()`.

Also rename `subdev_8255_init()` to `subdev_8255_io_init()`.  The
parameters are changing, so might as well rename it at the same time.

Also rename the `regbase` member of `struct subdev_8255_private` to
`context` since this holds the context for the call-back function call.

Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-7-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05 13:34:04 +02:00

617 lines
17 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* dmm32at.c
* Diamond Systems Diamond-MM-32-AT Comedi driver
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
*/
/*
* Driver: dmm32at
* Description: Diamond Systems Diamond-MM-32-AT
* Devices: [Diamond Systems] Diamond-MM-32-AT (dmm32at)
* Author: Perry J. Piplani <perry.j.piplani@nasa.gov>
* Updated: Fri Jun 4 09:13:24 CDT 2004
* Status: experimental
*
* Configuration Options:
* comedi_config /dev/comedi0 dmm32at baseaddr,irq
*
* This driver is for the Diamond Systems MM-32-AT board
* http://www.diamondsystems.com/products/diamondmm32at
*
* It is being used on several projects inside NASA, without
* problems so far. For analog input commands, TRIG_EXT is not
* yet supported.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_8255.h>
/* Board register addresses */
#define DMM32AT_AI_START_CONV_REG 0x00
#define DMM32AT_AI_LSB_REG 0x00
#define DMM32AT_AUX_DOUT_REG 0x01
#define DMM32AT_AUX_DOUT2 BIT(2) /* J3.42 - OUT2 (OUT2EN) */
#define DMM32AT_AUX_DOUT1 BIT(1) /* J3.43 */
#define DMM32AT_AUX_DOUT0 BIT(0) /* J3.44 - OUT0 (OUT0EN) */
#define DMM32AT_AI_MSB_REG 0x01
#define DMM32AT_AI_LO_CHAN_REG 0x02
#define DMM32AT_AI_HI_CHAN_REG 0x03
#define DMM32AT_AUX_DI_REG 0x04
#define DMM32AT_AUX_DI_DACBUSY BIT(7)
#define DMM32AT_AUX_DI_CALBUSY BIT(6)
#define DMM32AT_AUX_DI3 BIT(3) /* J3.45 - ADCLK (CLKSEL) */
#define DMM32AT_AUX_DI2 BIT(2) /* J3.46 - GATE12 (GT12EN) */
#define DMM32AT_AUX_DI1 BIT(1) /* J3.47 - GATE0 (GT0EN) */
#define DMM32AT_AUX_DI0 BIT(0) /* J3.48 - CLK0 (SRC0) */
#define DMM32AT_AO_LSB_REG 0x04
#define DMM32AT_AO_MSB_REG 0x05
#define DMM32AT_AO_MSB_DACH(x) ((x) << 6)
#define DMM32AT_FIFO_DEPTH_REG 0x06
#define DMM32AT_FIFO_CTRL_REG 0x07
#define DMM32AT_FIFO_CTRL_FIFOEN BIT(3)
#define DMM32AT_FIFO_CTRL_SCANEN BIT(2)
#define DMM32AT_FIFO_CTRL_FIFORST BIT(1)
#define DMM32AT_FIFO_STATUS_REG 0x07
#define DMM32AT_FIFO_STATUS_EF BIT(7)
#define DMM32AT_FIFO_STATUS_HF BIT(6)
#define DMM32AT_FIFO_STATUS_FF BIT(5)
#define DMM32AT_FIFO_STATUS_OVF BIT(4)
#define DMM32AT_FIFO_STATUS_FIFOEN BIT(3)
#define DMM32AT_FIFO_STATUS_SCANEN BIT(2)
#define DMM32AT_FIFO_STATUS_PAGE_MASK (3 << 0)
#define DMM32AT_CTRL_REG 0x08
#define DMM32AT_CTRL_RESETA BIT(5)
#define DMM32AT_CTRL_RESETD BIT(4)
#define DMM32AT_CTRL_INTRST BIT(3)
#define DMM32AT_CTRL_PAGE(x) ((x) << 0)
#define DMM32AT_CTRL_PAGE_8254 DMM32AT_CTRL_PAGE(0)
#define DMM32AT_CTRL_PAGE_8255 DMM32AT_CTRL_PAGE(1)
#define DMM32AT_CTRL_PAGE_CALIB DMM32AT_CTRL_PAGE(3)
#define DMM32AT_AI_STATUS_REG 0x08
#define DMM32AT_AI_STATUS_STS BIT(7)
#define DMM32AT_AI_STATUS_SD1 BIT(6)
#define DMM32AT_AI_STATUS_SD0 BIT(5)
#define DMM32AT_AI_STATUS_ADCH_MASK (0x1f << 0)
#define DMM32AT_INTCLK_REG 0x09
#define DMM32AT_INTCLK_ADINT BIT(7)
#define DMM32AT_INTCLK_DINT BIT(6)
#define DMM32AT_INTCLK_TINT BIT(5)
#define DMM32AT_INTCLK_CLKEN BIT(1) /* 1=see below 0=software */
#define DMM32AT_INTCLK_CLKSEL BIT(0) /* 1=OUT2 0=EXTCLK */
#define DMM32AT_CTRDIO_CFG_REG 0x0a
#define DMM32AT_CTRDIO_CFG_FREQ12 BIT(7) /* CLK12 1=100KHz 0=10MHz */
#define DMM32AT_CTRDIO_CFG_FREQ0 BIT(6) /* CLK0 1=10KHz 0=10MHz */
#define DMM32AT_CTRDIO_CFG_OUT2EN BIT(5) /* J3.42 1=OUT2 is DOUT2 */
#define DMM32AT_CTRDIO_CFG_OUT0EN BIT(4) /* J3,44 1=OUT0 is DOUT0 */
#define DMM32AT_CTRDIO_CFG_GT0EN BIT(2) /* J3.47 1=DIN1 is GATE0 */
#define DMM32AT_CTRDIO_CFG_SRC0 BIT(1) /* CLK0 is 0=FREQ0 1=J3.48 */
#define DMM32AT_CTRDIO_CFG_GT12EN BIT(0) /* J3.46 1=DIN2 is GATE12 */
#define DMM32AT_AI_CFG_REG 0x0b
#define DMM32AT_AI_CFG_SCINT(x) ((x) << 4)
#define DMM32AT_AI_CFG_SCINT_20US DMM32AT_AI_CFG_SCINT(0)
#define DMM32AT_AI_CFG_SCINT_15US DMM32AT_AI_CFG_SCINT(1)
#define DMM32AT_AI_CFG_SCINT_10US DMM32AT_AI_CFG_SCINT(2)
#define DMM32AT_AI_CFG_SCINT_5US DMM32AT_AI_CFG_SCINT(3)
#define DMM32AT_AI_CFG_RANGE BIT(3) /* 0=5V 1=10V */
#define DMM32AT_AI_CFG_ADBU BIT(2) /* 0=bipolar 1=unipolar */
#define DMM32AT_AI_CFG_GAIN(x) ((x) << 0)
#define DMM32AT_AI_READBACK_REG 0x0b
#define DMM32AT_AI_READBACK_WAIT BIT(7) /* DMM32AT_AI_STATUS_STS */
#define DMM32AT_AI_READBACK_RANGE BIT(3)
#define DMM32AT_AI_READBACK_ADBU BIT(2)
#define DMM32AT_AI_READBACK_GAIN_MASK (3 << 0)
#define DMM32AT_CLK1 0x0d
#define DMM32AT_CLK2 0x0e
#define DMM32AT_CLKCT 0x0f
#define DMM32AT_8255_IOBASE 0x0c /* Page 1 registers */
/* Board register values. */
/* DMM32AT_AI_CFG_REG 0x0b */
#define DMM32AT_RANGE_U10 0x0c
#define DMM32AT_RANGE_U5 0x0d
#define DMM32AT_RANGE_B10 0x08
#define DMM32AT_RANGE_B5 0x00
/* DMM32AT_CLKCT 0x0f */
#define DMM32AT_CLKCT1 0x56 /* mode3 counter 1 - write low byte only */
#define DMM32AT_CLKCT2 0xb6 /* mode3 counter 2 - write high and low byte */
/* board AI ranges in comedi structure */
static const struct comedi_lrange dmm32at_airanges = {
4, {
UNI_RANGE(10),
UNI_RANGE(5),
BIP_RANGE(10),
BIP_RANGE(5)
}
};
/* register values for above ranges */
static const unsigned char dmm32at_rangebits[] = {
DMM32AT_RANGE_U10,
DMM32AT_RANGE_U5,
DMM32AT_RANGE_B10,
DMM32AT_RANGE_B5,
};
/* only one of these ranges is valid, as set by a jumper on the
* board. The application should only use the range set by the jumper
*/
static const struct comedi_lrange dmm32at_aoranges = {
4, {
UNI_RANGE(10),
UNI_RANGE(5),
BIP_RANGE(10),
BIP_RANGE(5)
}
};
static void dmm32at_ai_set_chanspec(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int chanspec, int nchan)
{
unsigned int chan = CR_CHAN(chanspec);
unsigned int range = CR_RANGE(chanspec);
unsigned int last_chan = (chan + nchan - 1) % s->n_chan;
outb(DMM32AT_FIFO_CTRL_FIFORST, dev->iobase + DMM32AT_FIFO_CTRL_REG);
if (nchan > 1)
outb(DMM32AT_FIFO_CTRL_SCANEN,
dev->iobase + DMM32AT_FIFO_CTRL_REG);
outb(chan, dev->iobase + DMM32AT_AI_LO_CHAN_REG);
outb(last_chan, dev->iobase + DMM32AT_AI_HI_CHAN_REG);
outb(dmm32at_rangebits[range], dev->iobase + DMM32AT_AI_CFG_REG);
}
static unsigned int dmm32at_ai_get_sample(struct comedi_device *dev,
struct comedi_subdevice *s)
{
unsigned int val;
val = inb(dev->iobase + DMM32AT_AI_LSB_REG);
val |= (inb(dev->iobase + DMM32AT_AI_MSB_REG) << 8);
/* munge two's complement value to offset binary */
return comedi_offset_munge(s, val);
}
static int dmm32at_ai_status(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned char status;
status = inb(dev->iobase + context);
if ((status & DMM32AT_AI_STATUS_STS) == 0)
return 0;
return -EBUSY;
}
static int dmm32at_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
int ret;
int i;
dmm32at_ai_set_chanspec(dev, s, insn->chanspec, 1);
/* wait for circuit to settle */
ret = comedi_timeout(dev, s, insn, dmm32at_ai_status,
DMM32AT_AI_READBACK_REG);
if (ret)
return ret;
for (i = 0; i < insn->n; i++) {
outb(0xff, dev->iobase + DMM32AT_AI_START_CONV_REG);
ret = comedi_timeout(dev, s, insn, dmm32at_ai_status,
DMM32AT_AI_STATUS_REG);
if (ret)
return ret;
data[i] = dmm32at_ai_get_sample(dev, s);
}
return insn->n;
}
static int dmm32at_ai_check_chanlist(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
unsigned int chan0 = CR_CHAN(cmd->chanlist[0]);
unsigned int range0 = CR_RANGE(cmd->chanlist[0]);
int i;
for (i = 1; i < cmd->chanlist_len; i++) {
unsigned int chan = CR_CHAN(cmd->chanlist[i]);
unsigned int range = CR_RANGE(cmd->chanlist[i]);
if (chan != (chan0 + i) % s->n_chan) {
dev_dbg(dev->class_dev,
"entries in chanlist must be consecutive channels, counting upwards\n");
return -EINVAL;
}
if (range != range0) {
dev_dbg(dev->class_dev,
"entries in chanlist must all have the same gain\n");
return -EINVAL;
}
}
return 0;
}
static int dmm32at_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
int err = 0;
unsigned int arg;
/* Step 1 : check if triggers are trivially valid */
err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW);
err |= comedi_check_trigger_src(&cmd->scan_begin_src, TRIG_TIMER);
err |= comedi_check_trigger_src(&cmd->convert_src, TRIG_TIMER);
err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= comedi_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
if (err)
return 1;
/* Step 2a : make sure trigger sources are unique */
err |= comedi_check_trigger_is_unique(cmd->stop_src);
/* Step 2b : and mutually compatible */
if (err)
return 2;
/* Step 3: check if arguments are trivially valid */
err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0);
err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg, 1000000);
err |= comedi_check_trigger_arg_max(&cmd->scan_begin_arg, 1000000000);
if (cmd->convert_arg >= 17500)
cmd->convert_arg = 20000;
else if (cmd->convert_arg >= 12500)
cmd->convert_arg = 15000;
else if (cmd->convert_arg >= 7500)
cmd->convert_arg = 10000;
else
cmd->convert_arg = 5000;
err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg,
cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT)
err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1);
else /* TRIG_NONE */
err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
/* Step 4: fix up any arguments */
arg = cmd->convert_arg * cmd->scan_end_arg;
err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg, arg);
if (err)
return 4;
/* Step 5: check channel list if it exists */
if (cmd->chanlist && cmd->chanlist_len > 0)
err |= dmm32at_ai_check_chanlist(dev, s, cmd);
if (err)
return 5;
return 0;
}
static void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec)
{
unsigned char lo1, lo2, hi2;
unsigned short both2;
/* based on 10mhz clock */
lo1 = 200;
both2 = nansec / 20000;
hi2 = (both2 & 0xff00) >> 8;
lo2 = both2 & 0x00ff;
/* set counter clocks to 10MHz, disable all aux dio */
outb(0, dev->iobase + DMM32AT_CTRDIO_CFG_REG);
/* get access to the clock regs */
outb(DMM32AT_CTRL_PAGE_8254, dev->iobase + DMM32AT_CTRL_REG);
/* write the counter 1 control word and low byte to counter */
outb(DMM32AT_CLKCT1, dev->iobase + DMM32AT_CLKCT);
outb(lo1, dev->iobase + DMM32AT_CLK1);
/* write the counter 2 control word and low byte then to counter */
outb(DMM32AT_CLKCT2, dev->iobase + DMM32AT_CLKCT);
outb(lo2, dev->iobase + DMM32AT_CLK2);
outb(hi2, dev->iobase + DMM32AT_CLK2);
/* enable the ai conversion interrupt and the clock to start scans */
outb(DMM32AT_INTCLK_ADINT |
DMM32AT_INTCLK_CLKEN | DMM32AT_INTCLK_CLKSEL,
dev->iobase + DMM32AT_INTCLK_REG);
}
static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct comedi_cmd *cmd = &s->async->cmd;
int ret;
dmm32at_ai_set_chanspec(dev, s, cmd->chanlist[0], cmd->chanlist_len);
/* reset the interrupt just in case */
outb(DMM32AT_CTRL_INTRST, dev->iobase + DMM32AT_CTRL_REG);
/*
* wait for circuit to settle
* we don't have the 'insn' here but it's not needed
*/
ret = comedi_timeout(dev, s, NULL, dmm32at_ai_status,
DMM32AT_AI_READBACK_REG);
if (ret)
return ret;
if (cmd->stop_src == TRIG_NONE || cmd->stop_arg > 1) {
/* start the clock and enable the interrupts */
dmm32at_setaitimer(dev, cmd->scan_begin_arg);
} else {
/* start the interrupts and initiate a single scan */
outb(DMM32AT_INTCLK_ADINT, dev->iobase + DMM32AT_INTCLK_REG);
outb(0xff, dev->iobase + DMM32AT_AI_START_CONV_REG);
}
return 0;
}
static int dmm32at_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
/* disable further interrupts and clocks */
outb(0x0, dev->iobase + DMM32AT_INTCLK_REG);
return 0;
}
static irqreturn_t dmm32at_isr(int irq, void *d)
{
struct comedi_device *dev = d;
unsigned char intstat;
unsigned short val;
int i;
if (!dev->attached) {
dev_err(dev->class_dev, "spurious interrupt\n");
return IRQ_HANDLED;
}
intstat = inb(dev->iobase + DMM32AT_INTCLK_REG);
if (intstat & DMM32AT_INTCLK_ADINT) {
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_cmd *cmd = &s->async->cmd;
for (i = 0; i < cmd->chanlist_len; i++) {
val = dmm32at_ai_get_sample(dev, s);
comedi_buf_write_samples(s, &val, 1);
}
if (cmd->stop_src == TRIG_COUNT &&
s->async->scans_done >= cmd->stop_arg)
s->async->events |= COMEDI_CB_EOA;
comedi_handle_events(dev, s);
}
/* reset the interrupt */
outb(DMM32AT_CTRL_INTRST, dev->iobase + DMM32AT_CTRL_REG);
return IRQ_HANDLED;
}
static int dmm32at_ao_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned char status;
status = inb(dev->iobase + DMM32AT_AUX_DI_REG);
if ((status & DMM32AT_AUX_DI_DACBUSY) == 0)
return 0;
return -EBUSY;
}
static int dmm32at_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
int i;
for (i = 0; i < insn->n; i++) {
unsigned int val = data[i];
int ret;
/* write LSB then MSB + chan to load DAC */
outb(val & 0xff, dev->iobase + DMM32AT_AO_LSB_REG);
outb((val >> 8) | DMM32AT_AO_MSB_DACH(chan),
dev->iobase + DMM32AT_AO_MSB_REG);
/* wait for circuit to settle */
ret = comedi_timeout(dev, s, insn, dmm32at_ao_eoc, 0);
if (ret)
return ret;
/* dummy read to update DAC */
inb(dev->iobase + DMM32AT_AO_MSB_REG);
s->readback[chan] = val;
}
return insn->n;
}
static int dmm32at_8255_io(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
/* get access to the DIO regs */
outb(DMM32AT_CTRL_PAGE_8255, dev->iobase + DMM32AT_CTRL_REG);
if (dir) {
outb(data, dev->iobase + regbase + port);
return 0;
}
return inb(dev->iobase + regbase + port);
}
/* Make sure the board is there and put it to a known state */
static int dmm32at_reset(struct comedi_device *dev)
{
unsigned char aihi, ailo, fifostat, aistat, intstat, airback;
/* reset the board */
outb(DMM32AT_CTRL_RESETA, dev->iobase + DMM32AT_CTRL_REG);
/* allow a millisecond to reset */
usleep_range(1000, 3000);
/* zero scan and fifo control */
outb(0x0, dev->iobase + DMM32AT_FIFO_CTRL_REG);
/* zero interrupt and clock control */
outb(0x0, dev->iobase + DMM32AT_INTCLK_REG);
/* write a test channel range, the high 3 bits should drop */
outb(0x80, dev->iobase + DMM32AT_AI_LO_CHAN_REG);
outb(0xff, dev->iobase + DMM32AT_AI_HI_CHAN_REG);
/* set the range at 10v unipolar */
outb(DMM32AT_RANGE_U10, dev->iobase + DMM32AT_AI_CFG_REG);
/* should take 10 us to settle, here's a hundred */
usleep_range(100, 200);
/* read back the values */
ailo = inb(dev->iobase + DMM32AT_AI_LO_CHAN_REG);
aihi = inb(dev->iobase + DMM32AT_AI_HI_CHAN_REG);
fifostat = inb(dev->iobase + DMM32AT_FIFO_STATUS_REG);
aistat = inb(dev->iobase + DMM32AT_AI_STATUS_REG);
intstat = inb(dev->iobase + DMM32AT_INTCLK_REG);
airback = inb(dev->iobase + DMM32AT_AI_READBACK_REG);
/*
* NOTE: The (DMM32AT_AI_STATUS_SD1 | DMM32AT_AI_STATUS_SD0)
* test makes this driver only work if the board is configured
* with all A/D channels set for single-ended operation.
*/
if (ailo != 0x00 || aihi != 0x1f ||
fifostat != DMM32AT_FIFO_STATUS_EF ||
aistat != (DMM32AT_AI_STATUS_SD1 | DMM32AT_AI_STATUS_SD0) ||
intstat != 0x00 || airback != 0x0c)
return -EIO;
return 0;
}
static int dmm32at_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
struct comedi_subdevice *s;
int ret;
ret = comedi_request_region(dev, it->options[0], 0x10);
if (ret)
return ret;
ret = dmm32at_reset(dev);
if (ret) {
dev_err(dev->class_dev, "board detection failed\n");
return ret;
}
if (it->options[1]) {
ret = request_irq(it->options[1], dmm32at_isr, 0,
dev->board_name, dev);
if (ret == 0)
dev->irq = it->options[1];
}
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
/* Analog Input subdevice */
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
s->n_chan = 32;
s->maxdata = 0xffff;
s->range_table = &dmm32at_airanges;
s->insn_read = dmm32at_ai_insn_read;
if (dev->irq) {
dev->read_subdev = s;
s->subdev_flags |= SDF_CMD_READ;
s->len_chanlist = s->n_chan;
s->do_cmd = dmm32at_ai_cmd;
s->do_cmdtest = dmm32at_ai_cmdtest;
s->cancel = dmm32at_ai_cancel;
}
/* Analog Output subdevice */
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 4;
s->maxdata = 0x0fff;
s->range_table = &dmm32at_aoranges;
s->insn_write = dmm32at_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Digital I/O subdevice */
s = &dev->subdevices[2];
return subdev_8255_cb_init(dev, s, dmm32at_8255_io,
DMM32AT_8255_IOBASE);
}
static struct comedi_driver dmm32at_driver = {
.driver_name = "dmm32at",
.module = THIS_MODULE,
.attach = dmm32at_attach,
.detach = comedi_legacy_detach,
};
module_comedi_driver(dmm32at_driver);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi: Diamond Systems Diamond-MM-32-AT");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink