linux/arch/arc/kernel/smp.c
Thomas Gleixner 712610725c smp: Consolidate smp_prepare_boot_cpu()
There is no point in having seven architectures implementing the same empty
stub.

Provide a weak function in the init code and remove the stubs.

This also allows to utilize the function on UP which is required to
sanitize the per CPU handling on X86 UP.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de
2024-03-04 12:01:54 +01:00

410 lines
9.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* RajeshwarR: Dec 11, 2007
* -- Added support for Inter Processor Interrupts
*
* Vineetg: Nov 1st, 2007
* -- Initial Write (Borrowed heavily from ARM)
*/
#include <linux/spinlock.h>
#include <linux/sched/mm.h>
#include <linux/interrupt.h>
#include <linux/profile.h>
#include <linux/mm.h>
#include <linux/cpu.h>
#include <linux/irq.h>
#include <linux/atomic.h>
#include <linux/cpumask.h>
#include <linux/reboot.h>
#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/of_fdt.h>
#include <asm/mach_desc.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/processor.h>
#ifndef CONFIG_ARC_HAS_LLSC
arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
#endif
struct plat_smp_ops __weak plat_smp_ops;
/* XXX: per cpu ? Only needed once in early secondary boot */
struct task_struct *secondary_idle_tsk;
static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
{
unsigned long dt_root = of_get_flat_dt_root();
const char *buf;
buf = of_get_flat_dt_prop(dt_root, name, NULL);
if (!buf)
return -EINVAL;
if (cpulist_parse(buf, cpumask))
return -EINVAL;
return 0;
}
/*
* Read from DeviceTree and setup cpu possible mask. If there is no
* "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist.
*/
static void __init arc_init_cpu_possible(void)
{
struct cpumask cpumask;
if (arc_get_cpu_map("possible-cpus", &cpumask)) {
pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",
NR_CPUS);
cpumask_setall(&cpumask);
}
if (!cpumask_test_cpu(0, &cpumask))
panic("Master cpu (cpu[0]) is missed in cpu possible mask!");
init_cpu_possible(&cpumask);
}
/*
* Called from setup_arch() before calling setup_processor()
*
* - Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
* - Call early smp init hook. This can initialize a specific multi-core
* IP which is say common to several platforms (hence not part of
* platform specific int_early() hook)
*/
void __init smp_init_cpus(void)
{
arc_init_cpu_possible();
if (plat_smp_ops.init_early_smp)
plat_smp_ops.init_early_smp();
}
/* called from init ( ) => process 1 */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
/*
* if platform didn't set the present map already, do it now
* boot cpu is set to present already by init/main.c
*/
if (num_present_cpus() <= 1)
init_cpu_present(cpu_possible_mask);
}
void __init smp_cpus_done(unsigned int max_cpus)
{
}
/*
* Default smp boot helper for Run-on-reset case where all cores start off
* together. Non-masters need to wait for Master to start running.
* This is implemented using a flag in memory, which Non-masters spin-wait on.
* Master sets it to cpu-id of core to "ungate" it.
*/
static volatile int wake_flag;
#ifdef CONFIG_ISA_ARCOMPACT
#define __boot_read(f) f
#define __boot_write(f, v) f = v
#else
#define __boot_read(f) arc_read_uncached_32(&f)
#define __boot_write(f, v) arc_write_uncached_32(&f, v)
#endif
static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
{
BUG_ON(cpu == 0);
__boot_write(wake_flag, cpu);
}
void arc_platform_smp_wait_to_boot(int cpu)
{
/* for halt-on-reset, we've waited already */
if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
return;
while (__boot_read(wake_flag) != cpu)
;
__boot_write(wake_flag, 0);
}
const char *arc_platform_smp_cpuinfo(void)
{
return plat_smp_ops.info ? : "";
}
/*
* The very first "C" code executed by secondary
* Called from asm stub in head.S
* "current"/R25 already setup by low level boot code
*/
void start_kernel_secondary(void)
{
struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();
/* MMU, Caches, Vector Table, Interrupts etc */
setup_processor();
mmget(mm);
mmgrab(mm);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
/* Some SMP H/w setup - for each cpu */
if (plat_smp_ops.init_per_cpu)
plat_smp_ops.init_per_cpu(cpu);
if (machine_desc->init_per_cpu)
machine_desc->init_per_cpu(cpu);
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
local_irq_enable();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
}
/*
* Called from kernel_init( ) -> smp_init( ) - for each CPU
*
* At this point, Secondary Processor is "HALT"ed:
* -It booted, but was halted in head.S
* -It was configured to halt-on-reset
* So need to wake it up.
*
* Essential requirements being where to run from (PC) and stack (SP)
*/
int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
unsigned long wait_till;
secondary_idle_tsk = idle;
pr_info("Idle Task [%d] %p", cpu, idle);
pr_info("Trying to bring up CPU%u ...\n", cpu);
if (plat_smp_ops.cpu_kick)
plat_smp_ops.cpu_kick(cpu,
(unsigned long)first_lines_of_secondary);
else
arc_default_smp_cpu_kick(cpu, (unsigned long)NULL);
/* wait for 1 sec after kicking the secondary */
wait_till = jiffies + HZ;
while (time_before(jiffies, wait_till)) {
if (cpu_online(cpu))
break;
}
if (!cpu_online(cpu)) {
pr_info("Timeout: CPU%u FAILED to come up !!!\n", cpu);
return -1;
}
secondary_idle_tsk = NULL;
return 0;
}
/*****************************************************************************/
/* Inter Processor Interrupt Handling */
/*****************************************************************************/
enum ipi_msg_type {
IPI_EMPTY = 0,
IPI_RESCHEDULE = 1,
IPI_CALL_FUNC,
IPI_CPU_STOP,
};
/*
* In arches with IRQ for each msg type (above), receiver can use IRQ-id to
* figure out what msg was sent. For those which don't (ARC has dedicated IPI
* IRQ), the msg-type needs to be conveyed via per-cpu data
*/
static DEFINE_PER_CPU(unsigned long, ipi_data);
static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
{
unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu);
unsigned long old, new;
unsigned long flags;
pr_debug("%d Sending msg [%d] to %d\n", smp_processor_id(), msg, cpu);
local_irq_save(flags);
/*
* Atomically write new msg bit (in case others are writing too),
* and read back old value
*/
do {
new = old = *ipi_data_ptr;
new |= 1U << msg;
} while (cmpxchg(ipi_data_ptr, old, new) != old);
/*
* Call the platform specific IPI kick function, but avoid if possible:
* Only do so if there's no pending msg from other concurrent sender(s).
* Otherwise, receiver will see this msg as well when it takes the
* IPI corresponding to that msg. This is true, even if it is already in
* IPI handler, because !@old means it has not yet dequeued the msg(s)
* so @new msg can be a free-loader
*/
if (plat_smp_ops.ipi_send && !old)
plat_smp_ops.ipi_send(cpu);
local_irq_restore(flags);
}
static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
{
unsigned int cpu;
for_each_cpu(cpu, callmap)
ipi_send_msg_one(cpu, msg);
}
void arch_smp_send_reschedule(int cpu)
{
ipi_send_msg_one(cpu, IPI_RESCHEDULE);
}
void smp_send_stop(void)
{
struct cpumask targets;
cpumask_copy(&targets, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &targets);
ipi_send_msg(&targets, IPI_CPU_STOP);
}
void arch_send_call_function_single_ipi(int cpu)
{
ipi_send_msg_one(cpu, IPI_CALL_FUNC);
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
ipi_send_msg(mask, IPI_CALL_FUNC);
}
/*
* ipi_cpu_stop - handle IPI from smp_send_stop()
*/
static void ipi_cpu_stop(void)
{
machine_halt();
}
static inline int __do_IPI(unsigned long msg)
{
int rc = 0;
switch (msg) {
case IPI_RESCHEDULE:
scheduler_ipi();
break;
case IPI_CALL_FUNC:
generic_smp_call_function_interrupt();
break;
case IPI_CPU_STOP:
ipi_cpu_stop();
break;
default:
rc = 1;
}
return rc;
}
/*
* arch-common ISR to handle for inter-processor interrupts
* Has hooks for platform specific IPI
*/
static irqreturn_t do_IPI(int irq, void *dev_id)
{
unsigned long pending;
unsigned long __maybe_unused copy;
pr_debug("IPI [%ld] received on cpu %d\n",
*this_cpu_ptr(&ipi_data), smp_processor_id());
if (plat_smp_ops.ipi_clear)
plat_smp_ops.ipi_clear(irq);
/*
* "dequeue" the msg corresponding to this IPI (and possibly other
* piggybacked msg from elided IPIs: see ipi_send_msg_one() above)
*/
copy = pending = xchg(this_cpu_ptr(&ipi_data), 0);
do {
unsigned long msg = __ffs(pending);
int rc;
rc = __do_IPI(msg);
if (rc)
pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
pending &= ~(1U << msg);
} while (pending);
return IRQ_HANDLED;
}
/*
* API called by platform code to hookup arch-common ISR to their IPI IRQ
*
* Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
* function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
* request_percpu_irq() below will fail
*/
static DEFINE_PER_CPU(int, ipi_dev);
int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
{
int *dev = per_cpu_ptr(&ipi_dev, cpu);
unsigned int virq = irq_find_mapping(NULL, hwirq);
if (!virq)
panic("Cannot find virq for root domain and hwirq=%lu", hwirq);
/* Boot cpu calls request, all call enable */
if (!cpu) {
int rc;
rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev);
if (rc)
panic("Percpu IRQ request failed for %u\n", virq);
}
enable_percpu_irq(virq, 0);
return 0;
}