/* * Copyright (c) 2008, 2009 open80211s Ltd. * Authors: Luis Carlos Cobo * Javier Cardona * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include "ieee80211_i.h" #include "mesh.h" #define TMR_RUNNING_HK 0 #define TMR_RUNNING_MP 1 #define TMR_RUNNING_MPR 2 int mesh_allocated; static struct kmem_cache *rm_cache; bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) { return (mgmt->u.action.u.mesh_action.action_code == WLAN_MESH_ACTION_HWMP_PATH_SELECTION); } void ieee80211s_init(void) { mesh_pathtbl_init(); mesh_allocated = 1; rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), 0, 0, NULL); } void ieee80211s_stop(void) { mesh_pathtbl_unregister(); kmem_cache_destroy(rm_cache); } static void ieee80211_mesh_housekeeping_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = (void *) data; struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); if (local->quiescing) { set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); return; } ieee80211_queue_work(&local->hw, &sdata->work); } /** * mesh_matches_local - check if the config of a mesh point matches ours * * @sdata: local mesh subif * @ie: information elements of a management frame from the mesh peer * * This function checks if the mesh configuration of a mesh point matches the * local mesh configuration, i.e. if both nodes belong to the same mesh network. */ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *ie) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; u32 basic_rates = 0; struct cfg80211_chan_def sta_chan_def; /* * As support for each feature is added, check for matching * - On mesh config capabilities * - Power Save Support En * - Sync support enabled * - Sync support active * - Sync support required from peer * - MDA enabled * - Power management control on fc */ if (!(ifmsh->mesh_id_len == ie->mesh_id_len && memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) goto mismatch; ieee80211_sta_get_rates(local, ie, ieee80211_get_sdata_band(sdata), &basic_rates); if (sdata->vif.bss_conf.basic_rates != basic_rates) goto mismatch; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, ie->ht_operation, &sta_chan_def); if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef, &sta_chan_def)) goto mismatch; return true; mismatch: return false; } /** * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links * * @ie: information elements of a management frame from the mesh peer */ bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) { return (ie->mesh_config->meshconf_cap & IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; } /** * mesh_accept_plinks_update - update accepting_plink in local mesh beacons * * @sdata: mesh interface in which mesh beacons are going to be updated * * Returns: beacon changed flag if the beacon content changed. */ u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) { bool free_plinks; u32 changed = 0; /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, * the mesh interface might be able to establish plinks with peers that * are already on the table but are not on PLINK_ESTAB state. However, * in general the mesh interface is not accepting peer link requests * from new peers, and that must be reflected in the beacon */ free_plinks = mesh_plink_availables(sdata); if (free_plinks != sdata->u.mesh.accepting_plinks) { sdata->u.mesh.accepting_plinks = free_plinks; changed = BSS_CHANGED_BEACON; } return changed; } /* * mesh_sta_cleanup - clean up any mesh sta state * * @sta: mesh sta to clean up. */ void mesh_sta_cleanup(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; /* * maybe userspace handles peer allocation and peering, but in either * case the beacon is still generated by the kernel and we might need * an update. */ changed = mesh_accept_plinks_update(sdata); if (sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) { changed |= mesh_plink_deactivate(sta); del_timer_sync(&sta->plink_timer); } if (changed) ieee80211_bss_info_change_notify(sdata, changed); } int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) { int i; sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); if (!sdata->u.mesh.rmc) return -ENOMEM; sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; for (i = 0; i < RMC_BUCKETS; i++) INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i]); return 0; } void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) { struct mesh_rmc *rmc = sdata->u.mesh.rmc; struct rmc_entry *p, *n; int i; if (!sdata->u.mesh.rmc) return; for (i = 0; i < RMC_BUCKETS; i++) list_for_each_entry_safe(p, n, &rmc->bucket[i], list) { list_del(&p->list); kmem_cache_free(rm_cache, p); } kfree(rmc); sdata->u.mesh.rmc = NULL; } /** * mesh_rmc_check - Check frame in recent multicast cache and add if absent. * * @sa: source address * @mesh_hdr: mesh_header * * Returns: 0 if the frame is not in the cache, nonzero otherwise. * * Checks using the source address and the mesh sequence number if we have * received this frame lately. If the frame is not in the cache, it is added to * it. */ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, struct ieee80211_sub_if_data *sdata) { struct mesh_rmc *rmc = sdata->u.mesh.rmc; u32 seqnum = 0; int entries = 0; u8 idx; struct rmc_entry *p, *n; /* Don't care about endianness since only match matters */ memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; list_for_each_entry_safe(p, n, &rmc->bucket[idx], list) { ++entries; if (time_after(jiffies, p->exp_time) || (entries == RMC_QUEUE_MAX_LEN)) { list_del(&p->list); kmem_cache_free(rm_cache, p); --entries; } else if ((seqnum == p->seqnum) && (ether_addr_equal(sa, p->sa))) return -1; } p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); if (!p) return 0; p->seqnum = seqnum; p->exp_time = jiffies + RMC_TIMEOUT; memcpy(p->sa, sa, ETH_ALEN); list_add(&p->list, &rmc->bucket[idx]); return 0; } int mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos, neighbors; u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); if (skb_tailroom(skb) < 2 + meshconf_len) return -ENOMEM; pos = skb_put(skb, 2 + meshconf_len); *pos++ = WLAN_EID_MESH_CONFIG; *pos++ = meshconf_len; /* Active path selection protocol ID */ *pos++ = ifmsh->mesh_pp_id; /* Active path selection metric ID */ *pos++ = ifmsh->mesh_pm_id; /* Congestion control mode identifier */ *pos++ = ifmsh->mesh_cc_id; /* Synchronization protocol identifier */ *pos++ = ifmsh->mesh_sp_id; /* Authentication Protocol identifier */ *pos++ = ifmsh->mesh_auth_id; /* Mesh Formation Info - number of neighbors */ neighbors = atomic_read(&ifmsh->estab_plinks); /* Number of neighbor mesh STAs or 15 whichever is smaller */ neighbors = (neighbors > 15) ? 15 : neighbors; *pos++ = neighbors << 1; /* Mesh capability */ *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING; *pos |= ifmsh->accepting_plinks ? IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ *pos |= ifmsh->ps_peers_deep_sleep ? IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; *pos++ |= ifmsh->adjusting_tbtt ? IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; *pos++ = 0x00; return 0; } int mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos; if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len) return -ENOMEM; pos = skb_put(skb, 2 + ifmsh->mesh_id_len); *pos++ = WLAN_EID_MESH_ID; *pos++ = ifmsh->mesh_id_len; if (ifmsh->mesh_id_len) memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len); return 0; } int mesh_add_awake_window_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 *pos; /* see IEEE802.11-2012 13.14.6 */ if (ifmsh->ps_peers_light_sleep == 0 && ifmsh->ps_peers_deep_sleep == 0 && ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE) return 0; if (skb_tailroom(skb) < 4) return -ENOMEM; pos = skb_put(skb, 2 + 2); *pos++ = WLAN_EID_MESH_AWAKE_WINDOW; *pos++ = 2; put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos); return 0; } int mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 offset, len; const u8 *data; if (!ifmsh->ie || !ifmsh->ie_len) return 0; /* fast-forward to vendor IEs */ offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0); if (offset) { len = ifmsh->ie_len - offset; data = ifmsh->ie + offset; if (skb_tailroom(skb) < len) return -ENOMEM; memcpy(skb_put(skb, len), data, len); } return 0; } int mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u8 len = 0; const u8 *data; if (!ifmsh->ie || !ifmsh->ie_len) return 0; /* find RSN IE */ data = ifmsh->ie; while (data < ifmsh->ie + ifmsh->ie_len) { if (*data == WLAN_EID_RSN) { len = data[1] + 2; break; } data++; } if (len) { if (skb_tailroom(skb) < len) return -ENOMEM; memcpy(skb_put(skb, len), data, len); } return 0; } int mesh_add_ds_params_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u8 *pos; if (skb_tailroom(skb) < 3) return -ENOMEM; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { rcu_read_unlock(); return -EINVAL; } chan = chanctx_conf->def.chan; rcu_read_unlock(); pos = skb_put(skb, 2 + 1); *pos++ = WLAN_EID_DS_PARAMS; *pos++ = 1; *pos++ = ieee80211_frequency_to_channel(chan->center_freq); return 0; } int mesh_add_ht_cap_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); struct ieee80211_supported_band *sband; u8 *pos; sband = local->hw.wiphy->bands[band]; if (!sband->ht_cap.ht_supported || sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) return 0; if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) return -ENOMEM; pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap)); ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); return 0; } int mesh_add_ht_oper_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *channel; enum nl80211_channel_type channel_type = cfg80211_get_chandef_type(&sdata->vif.bss_conf.chandef); struct ieee80211_supported_band *sband; struct ieee80211_sta_ht_cap *ht_cap; u8 *pos; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { rcu_read_unlock(); return -EINVAL; } channel = chanctx_conf->def.chan; rcu_read_unlock(); sband = local->hw.wiphy->bands[channel->band]; ht_cap = &sband->ht_cap; if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT) return 0; if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation)) return -ENOMEM; pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation)); ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef, sdata->vif.bss_conf.ht_operation_mode); return 0; } static void ieee80211_mesh_path_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = (struct ieee80211_sub_if_data *) data; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; if (local->quiescing) { set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); return; } ieee80211_queue_work(&local->hw, &sdata->work); } static void ieee80211_mesh_path_root_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = (struct ieee80211_sub_if_data *) data; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); if (local->quiescing) { set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); return; } ieee80211_queue_work(&local->hw, &sdata->work); } void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) { if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT) set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); else { clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); /* stop running timer */ del_timer_sync(&ifmsh->mesh_path_root_timer); } } /** * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame * @hdr: 802.11 frame header * @fc: frame control field * @meshda: destination address in the mesh * @meshsa: source address address in the mesh. Same as TA, as frame is * locally originated. * * Return the length of the 802.11 (does not include a mesh control header) */ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, const u8 *meshda, const u8 *meshsa) { if (is_multicast_ether_addr(meshda)) { *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); /* DA TA SA */ memcpy(hdr->addr1, meshda, ETH_ALEN); memcpy(hdr->addr2, meshsa, ETH_ALEN); memcpy(hdr->addr3, meshsa, ETH_ALEN); return 24; } else { *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); /* RA TA DA SA */ memset(hdr->addr1, 0, ETH_ALEN); /* RA is resolved later */ memcpy(hdr->addr2, meshsa, ETH_ALEN); memcpy(hdr->addr3, meshda, ETH_ALEN); memcpy(hdr->addr4, meshsa, ETH_ALEN); return 30; } } /** * ieee80211_new_mesh_header - create a new mesh header * @meshhdr: uninitialized mesh header * @sdata: mesh interface to be used * @addr4or5: 1st address in the ae header, which may correspond to address 4 * (if addr6 is NULL) or address 5 (if addr6 is present). It may * be NULL. * @addr6: 2nd address in the ae header, which corresponds to addr6 of the * mesh frame * * Return the header length. */ int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, struct ieee80211_sub_if_data *sdata, char *addr4or5, char *addr6) { int aelen = 0; BUG_ON(!addr4or5 && addr6); memset(meshhdr, 0, sizeof(*meshhdr)); meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); sdata->u.mesh.mesh_seqnum++; if (addr4or5 && !addr6) { meshhdr->flags |= MESH_FLAGS_AE_A4; aelen += ETH_ALEN; memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); } else if (addr4or5 && addr6) { meshhdr->flags |= MESH_FLAGS_AE_A5_A6; aelen += 2 * ETH_ALEN; memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); } return 6 + aelen; } static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_mesh *ifmsh) { u32 changed; ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT); mesh_path_expire(sdata); changed = mesh_accept_plinks_update(sdata); ieee80211_bss_info_change_notify(sdata, changed); mod_timer(&ifmsh->housekeeping_timer, round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); } static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u32 interval; mesh_path_tx_root_frame(sdata); if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN) interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; else interval = ifmsh->mshcfg.dot11MeshHWMProotInterval; mod_timer(&ifmsh->mesh_path_root_timer, round_jiffies(TU_TO_EXP_TIME(interval))); } #ifdef CONFIG_PM void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; /* use atomic bitops in case all timers fire at the same time */ if (del_timer_sync(&ifmsh->housekeeping_timer)) set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); if (del_timer_sync(&ifmsh->mesh_path_timer)) set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); if (del_timer_sync(&ifmsh->mesh_path_root_timer)) set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); } void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running)) add_timer(&ifmsh->housekeeping_timer); if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running)) add_timer(&ifmsh->mesh_path_timer); if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running)) add_timer(&ifmsh->mesh_path_root_timer); ieee80211_mesh_root_setup(ifmsh); } #endif void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; u32 changed = BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_HT | BSS_CHANGED_BASIC_RATES | BSS_CHANGED_BEACON_INT; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); local->fif_other_bss++; /* mesh ifaces must set allmulti to forward mcast traffic */ atomic_inc(&local->iff_allmultis); ieee80211_configure_filter(local); ifmsh->mesh_cc_id = 0; /* Disabled */ ifmsh->mesh_auth_id = 0; /* Disabled */ /* register sync ops from extensible synchronization framework */ ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id); ifmsh->adjusting_tbtt = false; ifmsh->sync_offset_clockdrift_max = 0; set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); ieee80211_mesh_root_setup(ifmsh); ieee80211_queue_work(&local->hw, &sdata->work); sdata->vif.bss_conf.ht_operation_mode = ifmsh->mshcfg.ht_opmode; sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); changed |= ieee80211_mps_local_status_update(sdata); ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; netif_carrier_off(sdata->dev); /* stop the beacon */ ifmsh->mesh_id_len = 0; sdata->vif.bss_conf.enable_beacon = false; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); /* flush STAs and mpaths on this iface */ sta_info_flush(sdata); mesh_path_flush_by_iface(sdata); /* free all potentially still buffered group-addressed frames */ local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); skb_queue_purge(&ifmsh->ps.bc_buf); del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); del_timer_sync(&sdata->u.mesh.mesh_path_timer); /* * If the timer fired while we waited for it, it will have * requeued the work. Now the work will be running again * but will not rearm the timer again because it checks * whether the interface is running, which, at this point, * it no longer is. */ cancel_work_sync(&sdata->work); local->fif_other_bss--; atomic_dec(&local->iff_allmultis); ieee80211_configure_filter(local); sdata->u.mesh.timers_running = 0; } static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, u16 stype, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee802_11_elems elems; struct ieee80211_channel *channel; size_t baselen; int freq; enum ieee80211_band band = rx_status->band; /* ignore ProbeResp to foreign address */ if (stype == IEEE80211_STYPE_PROBE_RESP && !ether_addr_equal(mgmt->da, sdata->vif.addr)) return; baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; if (baselen > len) return; ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, &elems); /* ignore non-mesh or secure / unsecure mismatch */ if ((!elems.mesh_id || !elems.mesh_config) || (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) || (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)) return; if (elems.ds_params && elems.ds_params_len == 1) freq = ieee80211_channel_to_frequency(elems.ds_params[0], band); else freq = rx_status->freq; channel = ieee80211_get_channel(local->hw.wiphy, freq); if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) return; if (mesh_matches_local(sdata, &elems)) mesh_neighbour_update(sdata, mgmt->sa, &elems); if (ifmsh->sync_ops) ifmsh->sync_ops->rx_bcn_presp(sdata, stype, mgmt, &elems, rx_status); } static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { switch (mgmt->u.action.category) { case WLAN_CATEGORY_SELF_PROTECTED: switch (mgmt->u.action.u.self_prot.action_code) { case WLAN_SP_MESH_PEERING_OPEN: case WLAN_SP_MESH_PEERING_CLOSE: case WLAN_SP_MESH_PEERING_CONFIRM: mesh_rx_plink_frame(sdata, mgmt, len, rx_status); break; } break; case WLAN_CATEGORY_MESH_ACTION: if (mesh_action_is_path_sel(mgmt)) mesh_rx_path_sel_frame(sdata, mgmt, len); break; } } void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_rx_status *rx_status; struct ieee80211_mgmt *mgmt; u16 stype; rx_status = IEEE80211_SKB_RXCB(skb); mgmt = (struct ieee80211_mgmt *) skb->data; stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; switch (stype) { case IEEE80211_STYPE_PROBE_RESP: case IEEE80211_STYPE_BEACON: ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, rx_status); break; case IEEE80211_STYPE_ACTION: ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); break; } } void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; if (ifmsh->preq_queue_len && time_after(jiffies, ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) mesh_path_start_discovery(sdata); if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags)) mesh_mpath_table_grow(); if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags)) mesh_mpp_table_grow(); if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) ieee80211_mesh_housekeeping(sdata, ifmsh); if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) ieee80211_mesh_rootpath(sdata); if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags)) mesh_sync_adjust_tbtt(sdata); } void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) if (ieee80211_vif_is_mesh(&sdata->vif)) ieee80211_queue_work(&local->hw, &sdata->work); rcu_read_unlock(); } void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; static u8 zero_addr[ETH_ALEN] = {}; setup_timer(&ifmsh->housekeeping_timer, ieee80211_mesh_housekeeping_timer, (unsigned long) sdata); ifmsh->accepting_plinks = true; ifmsh->preq_id = 0; ifmsh->sn = 0; ifmsh->num_gates = 0; atomic_set(&ifmsh->mpaths, 0); mesh_rmc_init(sdata); ifmsh->last_preq = jiffies; ifmsh->next_perr = jiffies; /* Allocate all mesh structures when creating the first mesh interface. */ if (!mesh_allocated) ieee80211s_init(); setup_timer(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, (unsigned long) sdata); setup_timer(&ifmsh->mesh_path_root_timer, ieee80211_mesh_path_root_timer, (unsigned long) sdata); INIT_LIST_HEAD(&ifmsh->preq_queue.list); skb_queue_head_init(&ifmsh->ps.bc_buf); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); sdata->vif.bss_conf.bssid = zero_addr; }