/****************************************************************************** * QLOGIC LINUX SOFTWARE * * QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver * Copyright (C) 2000 Qlogic Corporation (www.qlogic.com) * Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc. * Copyright (C) 2003-2004 Christoph Hellwig * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * ******************************************************************************/ #define QLA1280_VERSION "3.25" /***************************************************************************** Revision History: Rev 3.25.1, February 10, 2005 Christoph Hellwig - use pci_map_single to map non-S/G requests - remove qla1280_proc_info Rev 3.25, September 28, 2004, Christoph Hellwig - add support for ISP1020/1040 - don't include "scsi.h" anymore for 2.6.x Rev 3.24.4 June 7, 2004 Christoph Hellwig - restructure firmware loading, cleanup initialization code - prepare support for ISP1020/1040 chips Rev 3.24.3 January 19, 2004, Jes Sorensen - Handle PCI DMA mask settings correctly - Correct order of error handling in probe_one, free_irq should not be called if request_irq failed Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez - Big endian fixes (James) - Remove bogus IOCB content on zero data transfer commands (Andrew) Rev 3.24.1 January 5, 2004, Jes Sorensen - Initialize completion queue to avoid OOPS on probe - Handle interrupts during mailbox testing Rev 3.24 November 17, 2003, Christoph Hellwig - use struct list_head for completion queue - avoid old Scsi_FOO typedefs - cleanup 2.4 compat glue a bit - use headers on 2.6 instead of "scsi.h" - make initialization for memory mapped vs port I/O more similar - remove broken pci config space manipulation - kill more cruft - this is an almost perfect 2.6 scsi driver now! ;) Rev 3.23.39 December 17, 2003, Jes Sorensen - Delete completion queue from srb if mailbox command failed to to avoid qla1280_done completeting qla1280_error_action's obsolete context - Reduce arguments for qla1280_done Rev 3.23.38 October 18, 2003, Christoph Hellwig - Convert to new-style hotplugable driver for 2.6 - Fix missing scsi_unregister/scsi_host_put on HBA removal - Kill some more cruft Rev 3.23.37 October 1, 2003, Jes Sorensen - Make MMIO depend on CONFIG_X86_VISWS instead of yet another random CONFIG option - Clean up locking in probe path Rev 3.23.36 October 1, 2003, Christoph Hellwig - queuecommand only ever receives new commands - clear flags - Reintegrate lost fixes from Linux 2.5 Rev 3.23.35 August 14, 2003, Jes Sorensen - Build against 2.6 Rev 3.23.34 July 23, 2003, Jes Sorensen - Remove pointless TRUE/FALSE macros - Clean up vchan handling Rev 3.23.33 July 3, 2003, Jes Sorensen - Don't define register access macros before define determining MMIO. This just happend to work out on ia64 but not elsewhere. - Don't try and read from the card while it is in reset as it won't respond and causes an MCA Rev 3.23.32 June 23, 2003, Jes Sorensen - Basic support for boot time arguments Rev 3.23.31 June 8, 2003, Jes Sorensen - Reduce boot time messages Rev 3.23.30 June 6, 2003, Jes Sorensen - Do not enable sync/wide/ppr before it has been determined that the target device actually supports it - Enable DMA arbitration for multi channel controllers Rev 3.23.29 June 3, 2003, Jes Sorensen - Port to 2.5.69 Rev 3.23.28 June 3, 2003, Jes Sorensen - Eliminate duplicate marker commands on bus resets - Handle outstanding commands appropriately on bus/device resets Rev 3.23.27 May 28, 2003, Jes Sorensen - Remove bogus input queue code, let the Linux SCSI layer do the work - Clean up NVRAM handling, only read it once from the card - Add a number of missing default nvram parameters Rev 3.23.26 Beta May 28, 2003, Jes Sorensen - Use completion queue for mailbox commands instead of busy wait Rev 3.23.25 Beta May 27, 2003, James Bottomley - Migrate to use new error handling code Rev 3.23.24 Beta May 21, 2003, James Bottomley - Big endian support - Cleanup data direction code Rev 3.23.23 Beta May 12, 2003, Jes Sorensen - Switch to using MMIO instead of PIO Rev 3.23.22 Beta April 15, 2003, Jes Sorensen - Fix PCI parity problem with 12160 during reset. Rev 3.23.21 Beta April 14, 2003, Jes Sorensen - Use pci_map_page()/pci_unmap_page() instead of map_single version. Rev 3.23.20 Beta April 9, 2003, Jes Sorensen - Remove < 2.4.x support - Introduce HOST_LOCK to make the spin lock changes portable. - Remove a bunch of idiotic and unnecessary typedef's - Kill all leftovers of target-mode support which never worked anyway Rev 3.23.19 Beta April 11, 2002, Linus Torvalds - Do qla1280_pci_config() before calling request_irq() and request_region() - Use pci_dma_hi32() to handle upper word of DMA addresses instead of large shifts - Hand correct arguments to free_irq() in case of failure Rev 3.23.18 Beta April 11, 2002, Jes Sorensen - Run source through Lindent and clean up the output Rev 3.23.17 Beta April 11, 2002, Jes Sorensen - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32 Rev 3.23.16 Beta March 19, 2002, Jes Sorensen - Rely on mailbox commands generating interrupts - do not run qla1280_isr() from ql1280_mailbox_command() - Remove device_reg_t - Integrate ql12160_set_target_parameters() with 1280 version - Make qla1280_setup() non static - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request sent to the card - this command pauses the firmare!!! Rev 3.23.15 Beta March 19, 2002, Jes Sorensen - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions - Remove a pile of pointless and confusing (srb_t **) and (scsi_lu_t *) typecasts - Explicit mark that we do not use the new error handling (for now) - Remove scsi_qla_host_t and use 'struct' instead - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled, pci_64bit_slot flags which weren't used for anything anyway - Grab host->host_lock while calling qla1280_isr() from abort() - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we do not need to save/restore flags in the interrupt handler - Enable interrupts early (before any mailbox access) in preparation for cleaning up the mailbox handling Rev 3.23.14 Beta March 14, 2002, Jes Sorensen - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace it with proper use of dprintk(). - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take a debug level argument to determine if data is to be printed - Add KERN_* info to printk() Rev 3.23.13 Beta March 14, 2002, Jes Sorensen - Significant cosmetic cleanups - Change debug code to use dprintk() and remove #if mess Rev 3.23.12 Beta March 13, 2002, Jes Sorensen - More cosmetic cleanups, fix places treating return as function - use cpu_relax() in qla1280_debounce_register() Rev 3.23.11 Beta March 13, 2002, Jes Sorensen - Make it compile under 2.5.5 Rev 3.23.10 Beta October 1, 2001, Jes Sorensen - Do no typecast short * to long * in QL1280BoardTbl, this broke miserably on big endian boxes Rev 3.23.9 Beta September 30, 2001, Jes Sorensen - Remove pre 2.2 hack for checking for reentrance in interrupt handler - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32 unsigned int to match the types from struct scsi_cmnd Rev 3.23.8 Beta September 29, 2001, Jes Sorensen - Remove bogus timer_t typedef from qla1280.h - Remove obsolete pre 2.2 PCI setup code, use proper #define's for PCI_ values, call pci_set_master() - Fix memleak of qla1280_buffer on module unload - Only compile module parsing code #ifdef MODULE - should be changed to use individual MODULE_PARM's later - Remove dummy_buffer that was never modified nor printed - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls - Remove \r from print statements, this is Linux, not DOS - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK} dummy macros - Remove C++ compile hack in header file as Linux driver are not supposed to be compiled as C++ - Kill MS_64BITS macro as it makes the code more readable - Remove unnecessary flags.in_interrupts bit Rev 3.23.7 Beta August 20, 2001, Jes Sorensen - Dont' check for set flags on q->q_flag one by one in qla1280_next() - Check whether the interrupt was generated by the QLA1280 before doing any processing - qla1280_status_entry(): Only zero out part of sense_buffer that is not being copied into - Remove more superflouous typecasts - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy() Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel - Don't walk the entire list in qla1280_putq_t() just to directly grab the pointer to the last element afterwards Rev 3.23.5 Beta August 9, 2001, Jes Sorensen - Don't use SA_INTERRUPT, it's use is deprecated for this kinda driver Rev 3.23.4 Beta August 8, 2001, Jes Sorensen - Set dev->max_sectors to 1024 Rev 3.23.3 Beta August 6, 2001, Jes Sorensen - Provide compat macros for pci_enable_device(), pci_find_subsys() and scsi_set_pci_device() - Call scsi_set_pci_device() for all devices - Reduce size of kernel version dependent device probe code - Move duplicate probe/init code to separate function - Handle error if qla1280_mem_alloc() fails - Kill OFFSET() macro and use Linux's PCI definitions instead - Kill private structure defining PCI config space (struct config_reg) - Only allocate I/O port region if not in MMIO mode - Remove duplicate (unused) sanity check of sife of srb_t Rev 3.23.2 Beta August 6, 2001, Jes Sorensen - Change home-brew memset() implementations to use memset() - Remove all references to COMTRACE() - accessing a PC's COM2 serial port directly is not legal under Linux. Rev 3.23.1 Beta April 24, 2001, Jes Sorensen - Remove pre 2.2 kernel support - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat) - Fix MMIO access to use readl/writel instead of directly dereferencing pointers - Nuke MSDOS debugging code - Change true/false data types to int from uint8_t - Use int for counters instead of uint8_t etc. - Clean up size & byte order conversion macro usage Rev 3.23 Beta January 11, 2001 BN Qlogic - Added check of device_id when handling non QLA12160s during detect(). Rev 3.22 Beta January 5, 2001 BN Qlogic - Changed queue_task() to schedule_task() for kernels 2.4.0 and higher. Note: 2.4.0-testxx kernels released prior to the actual 2.4.0 kernel release on January 2001 will get compile/link errors with schedule_task(). Please update your kernel to released 2.4.0 level, or comment lines in this file flagged with 3.22 to resolve compile/link error of schedule_task(). - Added -DCONFIG_SMP in addition to -D__SMP__ in Makefile for 2.4.0 builds of driver as module. Rev 3.21 Beta January 4, 2001 BN Qlogic - Changed criteria of 64/32 Bit mode of HBA operation according to BITS_PER_LONG rather than HBA's NVRAM setting of >4Gig memory bit; so that the HBA auto-configures without the need to setup each system individually. Rev 3.20 Beta December 5, 2000 BN Qlogic - Added priority handling to IA-64 onboard SCSI ISP12160 chip for kernels greater than 2.3.18. - Added irqrestore for qla1280_intr_handler. - Enabled /proc/scsi/qla1280 interface. - Clear /proc/scsi/qla1280 counters in detect(). Rev 3.19 Beta October 13, 2000 BN Qlogic - Declare driver_template for new kernel (2.4.0 and greater) scsi initialization scheme. - Update /proc/scsi entry for 2.3.18 kernels and above as qla1280 Rev 3.18 Beta October 10, 2000 BN Qlogic - Changed scan order of adapters to map the QLA12160 followed by the QLA1280. Rev 3.17 Beta September 18, 2000 BN Qlogic - Removed warnings for 32 bit 2.4.x compiles - Corrected declared size for request and response DMA addresses that are kept in each ha Rev. 3.16 Beta August 25, 2000 BN Qlogic - Corrected 64 bit addressing issue on IA-64 where the upper 32 bits were not properly passed to the RISC engine. Rev. 3.15 Beta August 22, 2000 BN Qlogic - Modified qla1280_setup_chip to properly load ISP firmware for greater that 4 Gig memory on IA-64 Rev. 3.14 Beta August 16, 2000 BN Qlogic - Added setting of dma_mask to full 64 bit if flags.enable_64bit_addressing is set in NVRAM Rev. 3.13 Beta August 16, 2000 BN Qlogic - Use new PCI DMA mapping APIs for 2.4.x kernel Rev. 3.12 July 18, 2000 Redhat & BN Qlogic - Added check of pci_enable_device to detect() for 2.3.x - Use pci_resource_start() instead of pdev->resource[0].start in detect() for 2.3.x - Updated driver version Rev. 3.11 July 14, 2000 BN Qlogic - Updated SCSI Firmware to following versions: qla1x80: 8.13.08 qla1x160: 10.04.08 - Updated driver version to 3.11 Rev. 3.10 June 23, 2000 BN Qlogic - Added filtering of AMI SubSys Vendor ID devices Rev. 3.9 - DEBUG_QLA1280 undefined and new version BN Qlogic Rev. 3.08b May 9, 2000 MD Dell - Added logic to check against AMI subsystem vendor ID Rev. 3.08 May 4, 2000 DG Qlogic - Added logic to check for PCI subsystem ID. Rev. 3.07 Apr 24, 2000 DG & BN Qlogic - Updated SCSI Firmware to following versions: qla12160: 10.01.19 qla1280: 8.09.00 Rev. 3.06 Apr 12, 2000 DG & BN Qlogic - Internal revision; not released Rev. 3.05 Mar 28, 2000 DG & BN Qlogic - Edit correction for virt_to_bus and PROC. Rev. 3.04 Mar 28, 2000 DG & BN Qlogic - Merge changes from ia64 port. Rev. 3.03 Mar 28, 2000 BN Qlogic - Increase version to reflect new code drop with compile fix of issue with inclusion of linux/spinlock for 2.3 kernels Rev. 3.02 Mar 15, 2000 BN Qlogic - Merge qla1280_proc_info from 2.10 code base Rev. 3.01 Feb 10, 2000 BN Qlogic - Corrected code to compile on a 2.2.x kernel. Rev. 3.00 Jan 17, 2000 DG Qlogic - Added 64-bit support. Rev. 2.07 Nov 9, 1999 DG Qlogic - Added new routine to set target parameters for ISP12160. Rev. 2.06 Sept 10, 1999 DG Qlogic - Added support for ISP12160 Ultra 3 chip. Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont - Modified code to remove errors generated when compiling with Cygnus IA64 Compiler. - Changed conversion of pointers to unsigned longs instead of integers. - Changed type of I/O port variables from uint32_t to unsigned long. - Modified OFFSET macro to work with 64-bit as well as 32-bit. - Changed sprintf and printk format specifiers for pointers to %p. - Changed some int to long type casts where needed in sprintf & printk. - Added l modifiers to sprintf and printk format specifiers for longs. - Removed unused local variables. Rev. 1.20 June 8, 1999 DG, Qlogic Changes to support RedHat release 6.0 (kernel 2.2.5). - Added SCSI exclusive access lock (io_request_lock) when accessing the adapter. - Added changes for the new LINUX interface template. Some new error handling routines have been added to the template, but for now we will use the old ones. - Initial Beta Release. *****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if LINUX_VERSION_CODE >= 0x020545 #include #include #include #include #include #else #include #include "scsi.h" #include #include "sd.h" #endif #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) #include #endif #if LINUX_VERSION_CODE < 0x020407 #error "Kernels older than 2.4.7 are no longer supported" #endif /* * Compile time Options: * 0 - Disable and 1 - Enable */ #define DEBUG_QLA1280_INTR 0 #define DEBUG_PRINT_NVRAM 0 #define DEBUG_QLA1280 0 /* * The SGI VISWS is broken and doesn't support MMIO ;-( */ #ifdef CONFIG_X86_VISWS #define MEMORY_MAPPED_IO 0 #else #define MEMORY_MAPPED_IO 1 #endif #define UNIQUE_FW_NAME #include "qla1280.h" #include "ql12160_fw.h" /* ISP RISC codes */ #include "ql1280_fw.h" #include "ql1040_fw.h" /* * Missing PCI ID's */ #ifndef PCI_DEVICE_ID_QLOGIC_ISP1080 #define PCI_DEVICE_ID_QLOGIC_ISP1080 0x1080 #endif #ifndef PCI_DEVICE_ID_QLOGIC_ISP1240 #define PCI_DEVICE_ID_QLOGIC_ISP1240 0x1240 #endif #ifndef PCI_DEVICE_ID_QLOGIC_ISP1280 #define PCI_DEVICE_ID_QLOGIC_ISP1280 0x1280 #endif #ifndef PCI_DEVICE_ID_QLOGIC_ISP10160 #define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016 #endif #ifndef PCI_DEVICE_ID_QLOGIC_ISP12160 #define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216 #endif #ifndef PCI_VENDOR_ID_AMI #define PCI_VENDOR_ID_AMI 0x101e #endif #ifndef BITS_PER_LONG #error "BITS_PER_LONG not defined!" #endif #if (BITS_PER_LONG == 64) || defined CONFIG_HIGHMEM #define QLA_64BIT_PTR 1 #endif #ifdef QLA_64BIT_PTR #define pci_dma_hi32(a) ((a >> 16) >> 16) #else #define pci_dma_hi32(a) 0 #endif #define pci_dma_lo32(a) (a & 0xffffffff) #define NVRAM_DELAY() udelay(500) /* 2 microseconds */ #if LINUX_VERSION_CODE < 0x020500 #define HOST_LOCK &io_request_lock #define irqreturn_t void #define IRQ_RETVAL(foo) #define MSG_ORDERED_TAG 1 #define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN #define DMA_TO_DEVICE SCSI_DATA_WRITE #define DMA_FROM_DEVICE SCSI_DATA_READ #define DMA_NONE SCSI_DATA_NONE #ifndef HAVE_SECTOR_T typedef unsigned int sector_t; #endif static inline void scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth) { if (tag) { device->tagged_queue = tag; device->current_tag = 0; } device->queue_depth = depth; } static inline struct Scsi_Host *scsi_host_alloc(Scsi_Host_Template *t, size_t s) { return scsi_register(t, s); } static inline void scsi_host_put(struct Scsi_Host *h) { scsi_unregister(h); } #else #define HOST_LOCK ha->host->host_lock #endif #if LINUX_VERSION_CODE < 0x020600 #define DEV_SIMPLE_TAGS(device) device->tagged_queue /* * Hack around that qla1280_remove_one is called from * qla1280_release in 2.4 */ #undef __devexit #define __devexit #else #define DEV_SIMPLE_TAGS(device) device->simple_tags #endif #if defined(__ia64__) && !defined(ia64_platform_is) #define ia64_platform_is(foo) (!strcmp(x, platform_name)) #endif #define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020) #define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \ ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240) #define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \ ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160) static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *); static void qla1280_remove_one(struct pci_dev *); /* * QLogic Driver Support Function Prototypes. */ static void qla1280_done(struct scsi_qla_host *); #if LINUX_VERSION_CODE < 0x020545 static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *); #endif static int qla1280_get_token(char *); static int qla1280_setup(char *s) __init; /* * QLogic ISP1280 Hardware Support Function Prototypes. */ static int qla1280_load_firmware(struct scsi_qla_host *); static int qla1280_init_rings(struct scsi_qla_host *); static int qla1280_nvram_config(struct scsi_qla_host *); static int qla1280_mailbox_command(struct scsi_qla_host *, uint8_t, uint16_t *); static int qla1280_bus_reset(struct scsi_qla_host *, int); static int qla1280_device_reset(struct scsi_qla_host *, int, int); static int qla1280_abort_device(struct scsi_qla_host *, int, int, int); static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int); static int qla1280_abort_isp(struct scsi_qla_host *); #ifdef QLA_64BIT_PTR static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *); #else static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *); #endif static void qla1280_nv_write(struct scsi_qla_host *, uint16_t); static void qla1280_poll(struct scsi_qla_host *); static void qla1280_reset_adapter(struct scsi_qla_host *); static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8); static void qla1280_isp_cmd(struct scsi_qla_host *); static void qla1280_isr(struct scsi_qla_host *, struct list_head *); static void qla1280_rst_aen(struct scsi_qla_host *); static void qla1280_status_entry(struct scsi_qla_host *, struct response *, struct list_head *); static void qla1280_error_entry(struct scsi_qla_host *, struct response *, struct list_head *); static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t); static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t); static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *); static request_t *qla1280_req_pkt(struct scsi_qla_host *); static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *, unsigned int); static void qla1280_get_target_parameters(struct scsi_qla_host *, struct scsi_device *); static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int); static struct qla_driver_setup driver_setup; /* * convert scsi data direction to request_t control flags */ static inline uint16_t qla1280_data_direction(struct scsi_cmnd *cmnd) { switch(cmnd->sc_data_direction) { case DMA_FROM_DEVICE: return BIT_5; case DMA_TO_DEVICE: return BIT_6; case DMA_BIDIRECTIONAL: return BIT_5 | BIT_6; /* * We could BUG() on default here if one of the four cases aren't * met, but then again if we receive something like that from the * SCSI layer we have more serious problems. This shuts up GCC. */ case DMA_NONE: default: return 0; } } #if DEBUG_QLA1280 static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd); static void __qla1280_dump_buffer(char *, int); #endif /* * insmod needs to find the variable and make it point to something */ #ifdef MODULE static char *qla1280; /* insmod qla1280 options=verbose" */ module_param(qla1280, charp, 0); #else __setup("qla1280=", qla1280_setup); #endif /* * We use the scsi_pointer structure that's included with each scsi_command * to overlay our struct srb over it. qla1280_init() checks that a srb is not * bigger than a scsi_pointer. */ #define CMD_SP(Cmnd) &Cmnd->SCp #define CMD_CDBLEN(Cmnd) Cmnd->cmd_len #define CMD_CDBP(Cmnd) Cmnd->cmnd #define CMD_SNSP(Cmnd) Cmnd->sense_buffer #define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer) #define CMD_RESULT(Cmnd) Cmnd->result #define CMD_HANDLE(Cmnd) Cmnd->host_scribble #if LINUX_VERSION_CODE < 0x020545 #define CMD_REQUEST(Cmnd) Cmnd->request.cmd #else #define CMD_REQUEST(Cmnd) Cmnd->request->cmd #endif #define CMD_HOST(Cmnd) Cmnd->device->host #define SCSI_BUS_32(Cmnd) Cmnd->device->channel #define SCSI_TCN_32(Cmnd) Cmnd->device->id #define SCSI_LUN_32(Cmnd) Cmnd->device->lun /*****************************************/ /* ISP Boards supported by this driver */ /*****************************************/ struct qla_boards { unsigned char name[9]; /* Board ID String */ int numPorts; /* Number of SCSI ports */ unsigned short *fwcode; /* pointer to FW array */ unsigned short *fwlen; /* number of words in array */ unsigned short *fwstart; /* start address for F/W */ unsigned char *fwver; /* Ptr to F/W version array */ }; /* NOTE: the last argument in each entry is used to index ql1280_board_tbl */ static struct pci_device_id qla1280_pci_tbl[] = { {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, #ifdef CONFIG_SCSI_QLOGIC_1280_1040 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, #endif {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, {0,} }; MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl); static struct qla_boards ql1280_board_tbl[] = { /* Name , Number of ports, FW details */ {"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01, &fw12160i_addr01, &fw12160i_version_str[0]}, {"QLA1040", 1, &risc_code01[0], &risc_code_length01, &risc_code_addr01, &firmware_version[0]}, {"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01, &fw1280ei_addr01, &fw1280ei_version_str[0]}, {"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01, &fw1280ei_addr01, &fw1280ei_version_str[0]}, {"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01, &fw1280ei_addr01, &fw1280ei_version_str[0]}, {"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01, &fw12160i_addr01, &fw12160i_version_str[0]}, {" ", 0} }; static int qla1280_verbose = 1; #if DEBUG_QLA1280 static int ql_debug_level = 1; #define dprintk(level, format, a...) \ do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0) #define qla1280_dump_buffer(level, buf, size) \ if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size) #define qla1280_print_scsi_cmd(level, cmd) \ if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd) #else #define ql_debug_level 0 #define dprintk(level, format, a...) do{}while(0) #define qla1280_dump_buffer(a, b, c) do{}while(0) #define qla1280_print_scsi_cmd(a, b) do{}while(0) #endif #define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x); #define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x); #define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x); #define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x); static int qla1280_read_nvram(struct scsi_qla_host *ha) { uint16_t *wptr; uint8_t chksum; int cnt, i; struct nvram *nv; ENTER("qla1280_read_nvram"); if (driver_setup.no_nvram) return 1; printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no); wptr = (uint16_t *)&ha->nvram; nv = &ha->nvram; chksum = 0; for (cnt = 0; cnt < 3; cnt++) { *wptr = qla1280_get_nvram_word(ha, cnt); chksum += *wptr & 0xff; chksum += (*wptr >> 8) & 0xff; wptr++; } if (nv->id0 != 'I' || nv->id1 != 'S' || nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) { dprintk(2, "Invalid nvram ID or version!\n"); chksum = 1; } else { for (; cnt < sizeof(struct nvram); cnt++) { *wptr = qla1280_get_nvram_word(ha, cnt); chksum += *wptr & 0xff; chksum += (*wptr >> 8) & 0xff; wptr++; } } dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x" " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3, nv->version); if (chksum) { if (!driver_setup.no_nvram) printk(KERN_WARNING "scsi(%ld): Unable to identify or " "validate NVRAM checksum, using default " "settings\n", ha->host_no); ha->nvram_valid = 0; } else ha->nvram_valid = 1; /* The firmware interface is, um, interesting, in that the * actual firmware image on the chip is little endian, thus, * the process of taking that image to the CPU would end up * little endian. However, the firmare interface requires it * to be read a word (two bytes) at a time. * * The net result of this would be that the word (and * doubleword) quantites in the firmware would be correct, but * the bytes would be pairwise reversed. Since most of the * firmware quantites are, in fact, bytes, we do an extra * le16_to_cpu() in the firmware read routine. * * The upshot of all this is that the bytes in the firmware * are in the correct places, but the 16 and 32 bit quantites * are still in little endian format. We fix that up below by * doing extra reverses on them */ nv->isp_parameter = cpu_to_le16(nv->isp_parameter); nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w); for(i = 0; i < MAX_BUSES; i++) { nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout); nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth); } dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n"); LEAVE("qla1280_read_nvram"); return chksum; } /************************************************************************** * qla1280_info * Return a string describing the driver. **************************************************************************/ static const char * qla1280_info(struct Scsi_Host *host) { static char qla1280_scsi_name_buffer[125]; char *bp; struct scsi_qla_host *ha; struct qla_boards *bdp; bp = &qla1280_scsi_name_buffer[0]; ha = (struct scsi_qla_host *)host->hostdata; bdp = &ql1280_board_tbl[ha->devnum]; memset(bp, 0, sizeof(qla1280_scsi_name_buffer)); sprintf (bp, "QLogic %s PCI to SCSI Host Adapter\n" " Firmware version: %2d.%02d.%02d, Driver version %s", &bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2], QLA1280_VERSION); return bp; } /************************************************************************** * qla1200_queuecommand * Queue a command to the controller. * * Note: * The mid-level driver tries to ensures that queuecommand never gets invoked * concurrently with itself or the interrupt handler (although the * interrupt handler may call this routine as part of request-completion * handling). Unfortunely, it sometimes calls the scheduler in interrupt * context which is a big NO! NO!. **************************************************************************/ static int qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *)) { struct Scsi_Host *host = cmd->device->host; struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; struct srb *sp = (struct srb *)&cmd->SCp; int status; cmd->scsi_done = fn; sp->cmd = cmd; sp->flags = 0; qla1280_print_scsi_cmd(5, cmd); #ifdef QLA_64BIT_PTR /* * Using 64 bit commands if the PCI bridge doesn't support it is a * bit wasteful, however this should really only happen if one's * PCI controller is completely broken, like the BCM1250. For * sane hardware this is not an issue. */ status = qla1280_64bit_start_scsi(ha, sp); #else status = qla1280_32bit_start_scsi(ha, sp); #endif return status; } enum action { ABORT_COMMAND, ABORT_DEVICE, DEVICE_RESET, BUS_RESET, ADAPTER_RESET, FAIL }; /* timer action for error action processor */ static void qla1280_error_wait_timeout(unsigned long __data) { struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data; struct srb *sp = (struct srb *)CMD_SP(cmd); complete(sp->wait); } static void qla1280_mailbox_timeout(unsigned long __data) { struct scsi_qla_host *ha = (struct scsi_qla_host *)__data; struct device_reg __iomem *reg; reg = ha->iobase; ha->mailbox_out[0] = RD_REG_WORD(®->mailbox0); printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, " "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0], RD_REG_WORD(®->ictrl), RD_REG_WORD(®->istatus)); complete(ha->mailbox_wait); } /************************************************************************** * qla1200_error_action * The function will attempt to perform a specified error action and * wait for the results (or time out). * * Input: * cmd = Linux SCSI command packet of the command that cause the * bus reset. * action = error action to take (see action_t) * * Returns: * SUCCESS or FAILED * * Note: * Resetting the bus always succeeds - is has to, otherwise the * kernel will panic! Try a surgical technique - sending a BUS * DEVICE RESET message - on the offending target before pulling * the SCSI bus reset line. **************************************************************************/ static int qla1280_error_action(struct scsi_cmnd *cmd, enum action action) { struct scsi_qla_host *ha; int bus, target, lun; struct srb *sp; uint16_t data; unsigned char *handle; int result, i; DECLARE_COMPLETION(wait); struct timer_list timer; ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata); dprintk(4, "error_action %i, istatus 0x%04x\n", action, RD_REG_WORD(&ha->iobase->istatus)); dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n", RD_REG_WORD(&ha->iobase->host_cmd), RD_REG_WORD(&ha->iobase->ictrl), jiffies); ENTER("qla1280_error_action"); if (qla1280_verbose) printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, " "Handle=0x%p, action=0x%x\n", ha->host_no, cmd, CMD_HANDLE(cmd), action); if (cmd == NULL) { printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL " "si_Cmnd pointer, failing.\n"); LEAVE("qla1280_error_action"); return FAILED; } ha = (struct scsi_qla_host *)cmd->device->host->hostdata; sp = (struct srb *)CMD_SP(cmd); handle = CMD_HANDLE(cmd); /* Check for pending interrupts. */ data = qla1280_debounce_register(&ha->iobase->istatus); /* * The io_request_lock is held when the reset handler is called, hence * the interrupt handler cannot be running in parallel as it also * grabs the lock. /Jes */ if (data & RISC_INT) qla1280_isr(ha, &ha->done_q); /* * Determine the suggested action that the mid-level driver wants * us to perform. */ if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) { if(action == ABORT_COMMAND) { /* we never got this command */ printk(KERN_INFO "qla1280: Aborting a NULL handle\n"); return SUCCESS; /* no action - we don't have command */ } } else { sp->wait = &wait; } bus = SCSI_BUS_32(cmd); target = SCSI_TCN_32(cmd); lun = SCSI_LUN_32(cmd); /* Overloading result. Here it means the success or fail of the * *issue* of the action. When we return from the routine, it must * mean the actual success or fail of the action */ result = FAILED; switch (action) { case FAIL: break; case ABORT_COMMAND: if ((sp->flags & SRB_ABORT_PENDING)) { printk(KERN_WARNING "scsi(): Command has a pending abort " "message - ABORT_PENDING.\n"); /* This should technically be impossible since we * now wait for abort completion */ break; } for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) { if (sp == ha->outstanding_cmds[i]) { dprintk(1, "qla1280: RISC aborting command\n"); if (qla1280_abort_command(ha, sp, i) == 0) result = SUCCESS; else { /* * Since we don't know what might * have happend to the command, it * is unsafe to remove it from the * device's queue at this point. * Wait and let the escalation * process take care of it. */ printk(KERN_WARNING "scsi(%li:%i:%i:%i): Unable" " to abort command!\n", ha->host_no, bus, target, lun); } } } break; case ABORT_DEVICE: if (qla1280_verbose) printk(KERN_INFO "scsi(%ld:%d:%d:%d): Queueing abort device " "command.\n", ha->host_no, bus, target, lun); if (qla1280_abort_device(ha, bus, target, lun) == 0) result = SUCCESS; break; case DEVICE_RESET: if (qla1280_verbose) printk(KERN_INFO "scsi(%ld:%d:%d:%d): Queueing device reset " "command.\n", ha->host_no, bus, target, lun); if (qla1280_device_reset(ha, bus, target) == 0) result = SUCCESS; break; case BUS_RESET: if (qla1280_verbose) printk(KERN_INFO "qla1280(%ld:%d): Issuing BUS " "DEVICE RESET\n", ha->host_no, bus); if (qla1280_bus_reset(ha, bus == 0)) result = SUCCESS; break; case ADAPTER_RESET: default: if (qla1280_verbose) { printk(KERN_INFO "scsi(%ld): Issued ADAPTER RESET\n", ha->host_no); printk(KERN_INFO "scsi(%ld): I/O processing will " "continue automatically\n", ha->host_no); } ha->flags.reset_active = 1; /* * We restarted all of the commands automatically, so the * mid-level code can expect completions momentitarily. */ if (qla1280_abort_isp(ha) == 0) result = SUCCESS; ha->flags.reset_active = 0; } if (!list_empty(&ha->done_q)) qla1280_done(ha); /* If we didn't manage to issue the action, or we have no * command to wait for, exit here */ if (result == FAILED || handle == NULL || handle == (unsigned char *)INVALID_HANDLE) { /* * Clear completion queue to avoid qla1280_done() trying * to complete the command at a later stage after we * have exited the current context */ sp->wait = NULL; goto leave; } /* set up a timer just in case we're really jammed */ init_timer(&timer); timer.expires = jiffies + 4*HZ; timer.data = (unsigned long)cmd; timer.function = qla1280_error_wait_timeout; add_timer(&timer); /* wait for the action to complete (or the timer to expire) */ spin_unlock_irq(HOST_LOCK); wait_for_completion(&wait); del_timer_sync(&timer); spin_lock_irq(HOST_LOCK); sp->wait = NULL; /* the only action we might get a fail for is abort */ if (action == ABORT_COMMAND) { if(sp->flags & SRB_ABORTED) result = SUCCESS; else result = FAILED; } leave: dprintk(1, "RESET returning %d\n", result); LEAVE("qla1280_error_action"); return result; } /************************************************************************** * qla1280_abort * Abort the specified SCSI command(s). **************************************************************************/ static int qla1280_eh_abort(struct scsi_cmnd * cmd) { int rc; spin_lock_irq(cmd->device->host->host_lock); rc = qla1280_error_action(cmd, ABORT_COMMAND); spin_unlock_irq(cmd->device->host->host_lock); return rc; } /************************************************************************** * qla1280_device_reset * Reset the specified SCSI device **************************************************************************/ static int qla1280_eh_device_reset(struct scsi_cmnd *cmd) { int rc; spin_lock_irq(cmd->device->host->host_lock); rc = qla1280_error_action(cmd, DEVICE_RESET); spin_unlock_irq(cmd->device->host->host_lock); return rc; } /************************************************************************** * qla1280_bus_reset * Reset the specified bus. **************************************************************************/ static int qla1280_eh_bus_reset(struct scsi_cmnd *cmd) { int rc; spin_lock_irq(cmd->device->host->host_lock); rc = qla1280_error_action(cmd, BUS_RESET); spin_unlock_irq(cmd->device->host->host_lock); return rc; } /************************************************************************** * qla1280_adapter_reset * Reset the specified adapter (both channels) **************************************************************************/ static int qla1280_eh_adapter_reset(struct scsi_cmnd *cmd) { int rc; spin_lock_irq(cmd->device->host->host_lock); rc = qla1280_error_action(cmd, ADAPTER_RESET); spin_unlock_irq(cmd->device->host->host_lock); return rc; } static int qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) { int heads, sectors, cylinders; heads = 64; sectors = 32; cylinders = (unsigned long)capacity / (heads * sectors); if (cylinders > 1024) { heads = 255; sectors = 63; cylinders = (unsigned long)capacity / (heads * sectors); /* if (cylinders > 1023) cylinders = 1023; */ } geom[0] = heads; geom[1] = sectors; geom[2] = cylinders; return 0; } #if LINUX_VERSION_CODE < 0x020600 static int qla1280_detect(Scsi_Host_Template *template) { struct pci_device_id *id = &qla1280_pci_tbl[0]; struct pci_dev *pdev = NULL; int num_hosts = 0; if (sizeof(struct srb) > sizeof(Scsi_Pointer)) { printk(KERN_WARNING "qla1280: struct srb too big, aborting\n"); return 0; } if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) || (DMA_TO_DEVICE != PCI_DMA_TODEVICE) || (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) || (DMA_NONE != PCI_DMA_NONE)) { printk(KERN_WARNING "qla1280: dma direction bits don't match\n"); return 0; } #ifdef MODULE /* * If we are called as a module, the qla1280 pointer may not be null * and it would point to our bootup string, just like on the lilo * command line. IF not NULL, then process this config string with * qla1280_setup * * Boot time Options * To add options at boot time add a line to your lilo.conf file like: * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}" * which will result in the first four devices on the first two * controllers being set to a tagged queue depth of 32. */ if (qla1280) qla1280_setup(qla1280); #endif /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */ while ((pdev = pci_find_device(id->vendor, id->device, pdev))) { if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) { if (!qla1280_probe_one(pdev, id)) num_hosts++; } } pdev = NULL; /* Try and find each different type of adapter we support */ for (id = &qla1280_pci_tbl[0]; id->device; id++) { while ((pdev = pci_find_device(id->vendor, id->device, pdev))) { /* * skip QLA12160 already initialized on * PCI Bus 1 Dev 2 since we already initialized * and presented it */ if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 && pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) continue; if (!qla1280_probe_one(pdev, id)) num_hosts++; } } return num_hosts; } /* * This looks a bit ugly as we could just pass down host to * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper * around pci_driver::remove as used from 2.6 onwards. */ static int qla1280_release(struct Scsi_Host *host) { struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; qla1280_remove_one(ha->pdev); return 0; } static int qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[]) { return qla1280_biosparam(disk->device, NULL, disk->capacity, geom); } #endif /* disable risc and host interrupts */ static inline void qla1280_disable_intrs(struct scsi_qla_host *ha) { WRT_REG_WORD(&ha->iobase->ictrl, 0); RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */ } /* enable risc and host interrupts */ static inline void qla1280_enable_intrs(struct scsi_qla_host *ha) { WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC)); RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */ } /************************************************************************** * qla1280_intr_handler * Handles the H/W interrupt **************************************************************************/ static irqreturn_t qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs) { struct scsi_qla_host *ha; struct device_reg __iomem *reg; u16 data; int handled = 0; ENTER_INTR ("qla1280_intr_handler"); ha = (struct scsi_qla_host *)dev_id; spin_lock(HOST_LOCK); ha->isr_count++; reg = ha->iobase; qla1280_disable_intrs(ha); data = qla1280_debounce_register(®->istatus); /* Check for pending interrupts. */ if (data & RISC_INT) { qla1280_isr(ha, &ha->done_q); handled = 1; } if (!list_empty(&ha->done_q)) qla1280_done(ha); spin_unlock(HOST_LOCK); qla1280_enable_intrs(ha); LEAVE_INTR("qla1280_intr_handler"); return IRQ_RETVAL(handled); } static int qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target) { uint8_t mr; uint16_t mb[MAILBOX_REGISTER_COUNT]; struct nvram *nv; int status, lun; nv = &ha->nvram; mr = BIT_3 | BIT_2 | BIT_1 | BIT_0; /* Set Target Parameters. */ mb[0] = MBC_SET_TARGET_PARAMETERS; mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8; mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9; mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10; mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11; mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12; mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13; mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14; mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15; if (IS_ISP1x160(ha)) { mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5; mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8); mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) | nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width; mr |= BIT_6; } else { mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8); } mb[3] |= nv->bus[bus].target[target].sync_period; status = qla1280_mailbox_command(ha, mr, mb); /* Set Device Queue Parameters. */ for (lun = 0; lun < MAX_LUNS; lun++) { mb[0] = MBC_SET_DEVICE_QUEUE; mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); mb[1] |= lun; mb[2] = nv->bus[bus].max_queue_depth; mb[3] = nv->bus[bus].target[target].execution_throttle; status |= qla1280_mailbox_command(ha, 0x0f, mb); } if (status) printk(KERN_WARNING "scsi(%ld:%i:%i): " "qla1280_set_target_parameters() failed\n", ha->host_no, bus, target); return status; } /************************************************************************** * qla1280_slave_configure * * Description: * Determines the queue depth for a given device. There are two ways * a queue depth can be obtained for a tagged queueing device. One * way is the default queue depth which is determined by whether * If it is defined, then it is used * as the default queue depth. Otherwise, we use either 4 or 8 as the * default queue depth (dependent on the number of hardware SCBs). **************************************************************************/ static int qla1280_slave_configure(struct scsi_device *device) { struct scsi_qla_host *ha; int default_depth = 3; int bus = device->channel; int target = device->id; int status = 0; struct nvram *nv; unsigned long flags; ha = (struct scsi_qla_host *)device->host->hostdata; nv = &ha->nvram; if (qla1280_check_for_dead_scsi_bus(ha, bus)) return 1; if (device->tagged_supported && (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) { scsi_adjust_queue_depth(device, MSG_ORDERED_TAG, ha->bus_settings[bus].hiwat); } else { scsi_adjust_queue_depth(device, 0, default_depth); } #if LINUX_VERSION_CODE > 0x020500 nv->bus[bus].target[target].parameter.enable_sync = device->sdtr; nv->bus[bus].target[target].parameter.enable_wide = device->wdtr; nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr; #endif if (driver_setup.no_sync || (driver_setup.sync_mask && (~driver_setup.sync_mask & (1 << target)))) nv->bus[bus].target[target].parameter.enable_sync = 0; if (driver_setup.no_wide || (driver_setup.wide_mask && (~driver_setup.wide_mask & (1 << target)))) nv->bus[bus].target[target].parameter.enable_wide = 0; if (IS_ISP1x160(ha)) { if (driver_setup.no_ppr || (driver_setup.ppr_mask && (~driver_setup.ppr_mask & (1 << target)))) nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0; } spin_lock_irqsave(HOST_LOCK, flags); if (nv->bus[bus].target[target].parameter.enable_sync) status = qla1280_set_target_parameters(ha, bus, target); qla1280_get_target_parameters(ha, device); spin_unlock_irqrestore(HOST_LOCK, flags); return status; } #if LINUX_VERSION_CODE < 0x020545 /************************************************************************** * qla1280_select_queue_depth * * Sets the queue depth for each SCSI device hanging off the input * host adapter. We use a queue depth of 2 for devices that do not * support tagged queueing. **************************************************************************/ static void qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q) { struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; struct scsi_device *sdev; ENTER("qla1280_select_queue_depth"); for (sdev = sdev_q; sdev; sdev = sdev->next) if (sdev->host == host) qla1280_slave_configure(sdev); if (sdev_q) qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel); LEAVE("qla1280_select_queue_depth"); } #endif /* * qla1280_done * Process completed commands. * * Input: * ha = adapter block pointer. */ static void qla1280_done(struct scsi_qla_host *ha) { struct srb *sp; struct list_head *done_q; int bus, target, lun; struct scsi_cmnd *cmd; ENTER("qla1280_done"); done_q = &ha->done_q; while (!list_empty(done_q)) { sp = list_entry(done_q->next, struct srb, list); list_del(&sp->list); cmd = sp->cmd; bus = SCSI_BUS_32(cmd); target = SCSI_TCN_32(cmd); lun = SCSI_LUN_32(cmd); switch ((CMD_RESULT(cmd) >> 16)) { case DID_RESET: /* Issue marker command. */ qla1280_marker(ha, bus, target, 0, MK_SYNC_ID); break; case DID_ABORT: sp->flags &= ~SRB_ABORT_PENDING; sp->flags |= SRB_ABORTED; if (sp->flags & SRB_TIMEOUT) CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16; break; default: break; } /* Release memory used for this I/O */ if (cmd->use_sg) { pci_unmap_sg(ha->pdev, cmd->request_buffer, cmd->use_sg, cmd->sc_data_direction); } else if (cmd->request_bufflen) { pci_unmap_single(ha->pdev, sp->saved_dma_handle, cmd->request_bufflen, cmd->sc_data_direction); } /* Call the mid-level driver interrupt handler */ CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE; ha->actthreads--; #if LINUX_VERSION_CODE < 0x020500 if (cmd->cmnd[0] == INQUIRY) qla1280_get_target_options(cmd, ha); #endif (*(cmd)->scsi_done)(cmd); if(sp->wait != NULL) complete(sp->wait); } LEAVE("qla1280_done"); } /* * Translates a ISP error to a Linux SCSI error */ static int qla1280_return_status(struct response * sts, struct scsi_cmnd *cp) { int host_status = DID_ERROR; uint16_t comp_status = le16_to_cpu(sts->comp_status); uint16_t state_flags = le16_to_cpu(sts->state_flags); uint16_t residual_length = le16_to_cpu(sts->residual_length); uint16_t scsi_status = le16_to_cpu(sts->scsi_status); #if DEBUG_QLA1280_INTR static char *reason[] = { "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR" }; #endif /* DEBUG_QLA1280_INTR */ ENTER("qla1280_return_status"); #if DEBUG_QLA1280_INTR /* dprintk(1, "qla1280_return_status: compl status = 0x%04x\n", comp_status); */ #endif switch (comp_status) { case CS_COMPLETE: host_status = DID_OK; break; case CS_INCOMPLETE: if (!(state_flags & SF_GOT_BUS)) host_status = DID_NO_CONNECT; else if (!(state_flags & SF_GOT_TARGET)) host_status = DID_BAD_TARGET; else if (!(state_flags & SF_SENT_CDB)) host_status = DID_ERROR; else if (!(state_flags & SF_TRANSFERRED_DATA)) host_status = DID_ERROR; else if (!(state_flags & SF_GOT_STATUS)) host_status = DID_ERROR; else if (!(state_flags & SF_GOT_SENSE)) host_status = DID_ERROR; break; case CS_RESET: host_status = DID_RESET; break; case CS_ABORTED: host_status = DID_ABORT; break; case CS_TIMEOUT: host_status = DID_TIME_OUT; break; case CS_DATA_OVERRUN: dprintk(2, "Data overrun 0x%x\n", residual_length); dprintk(2, "qla1280_return_status: response packet data\n"); qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE); host_status = DID_ERROR; break; case CS_DATA_UNDERRUN: if ((cp->request_bufflen - residual_length) < cp->underflow) { printk(KERN_WARNING "scsi: Underflow detected - retrying " "command.\n"); host_status = DID_ERROR; } else host_status = DID_OK; break; default: host_status = DID_ERROR; break; } #if DEBUG_QLA1280_INTR dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n", reason[host_status], scsi_status); #endif LEAVE("qla1280_return_status"); return (scsi_status & 0xff) | (host_status << 16); } /****************************************************************************/ /* QLogic ISP1280 Hardware Support Functions. */ /****************************************************************************/ /* * qla1280_initialize_adapter * Initialize board. * * Input: * ha = adapter block pointer. * * Returns: * 0 = success */ static int __devinit qla1280_initialize_adapter(struct scsi_qla_host *ha) { struct device_reg __iomem *reg; int status; int bus; #if LINUX_VERSION_CODE > 0x020500 unsigned long flags; #endif ENTER("qla1280_initialize_adapter"); /* Clear adapter flags. */ ha->flags.online = 0; ha->flags.disable_host_adapter = 0; ha->flags.reset_active = 0; ha->flags.abort_isp_active = 0; #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) if (ia64_platform_is("sn2")) { printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA " "dual channel lockup workaround\n", ha->host_no); ha->flags.use_pci_vchannel = 1; driver_setup.no_nvram = 1; } #endif /* TODO: implement support for the 1040 nvram format */ if (IS_ISP1040(ha)) driver_setup.no_nvram = 1; dprintk(1, "Configure PCI space for adapter...\n"); reg = ha->iobase; /* Insure mailbox registers are free. */ WRT_REG_WORD(®->semaphore, 0); WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT); WRT_REG_WORD(®->host_cmd, HC_CLR_HOST_INT); RD_REG_WORD(®->host_cmd); if (qla1280_read_nvram(ha)) { dprintk(2, "qla1280_initialize_adapter: failed to read " "NVRAM\n"); } #if LINUX_VERSION_CODE >= 0x020500 /* * It's necessary to grab the spin here as qla1280_mailbox_command * needs to be able to drop the lock unconditionally to wait * for completion. * In 2.4 ->detect is called with the io_request_lock held. */ spin_lock_irqsave(HOST_LOCK, flags); #endif status = qla1280_load_firmware(ha); if (status) { printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n", ha->host_no); goto out; } /* Setup adapter based on NVRAM parameters. */ dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no); qla1280_nvram_config(ha); if (ha->flags.disable_host_adapter) { status = 1; goto out; } status = qla1280_init_rings(ha); if (status) goto out; /* Issue SCSI reset, if we can't reset twice then bus is dead */ for (bus = 0; bus < ha->ports; bus++) { if (!ha->bus_settings[bus].disable_scsi_reset && qla1280_bus_reset(ha, bus) && qla1280_bus_reset(ha, bus)) ha->bus_settings[bus].scsi_bus_dead = 1; } ha->flags.online = 1; out: #if LINUX_VERSION_CODE >= 0x020500 spin_unlock_irqrestore(HOST_LOCK, flags); #endif if (status) dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n"); LEAVE("qla1280_initialize_adapter"); return status; } /* * Chip diagnostics * Test chip for proper operation. * * Input: * ha = adapter block pointer. * * Returns: * 0 = success. */ static int qla1280_chip_diag(struct scsi_qla_host *ha) { uint16_t mb[MAILBOX_REGISTER_COUNT]; struct device_reg __iomem *reg = ha->iobase; int status = 0; int cnt; uint16_t data; dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", ®->id_l); dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no); /* Soft reset chip and wait for it to finish. */ WRT_REG_WORD(®->ictrl, ISP_RESET); /* * We can't do a traditional PCI write flush here by reading * back the register. The card will not respond once the reset * is in action and we end up with a machine check exception * instead. Nothing to do but wait and hope for the best. * A portable pci_write_flush(pdev) call would be very useful here. */ udelay(20); data = qla1280_debounce_register(®->ictrl); /* * Yet another QLogic gem ;-( */ for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) { udelay(5); data = RD_REG_WORD(®->ictrl); } if (!cnt) goto fail; /* Reset register cleared by chip reset. */ dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n"); WRT_REG_WORD(®->cfg_1, 0); /* Reset RISC and disable BIOS which allows RISC to execute out of RAM. */ WRT_REG_WORD(®->host_cmd, HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS); RD_REG_WORD(®->id_l); /* Flush PCI write */ data = qla1280_debounce_register(®->mailbox0); /* * I *LOVE* this code! */ for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) { udelay(5); data = RD_REG_WORD(®->mailbox0); } if (!cnt) goto fail; /* Check product ID of chip */ dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n"); if (RD_REG_WORD(®->mailbox1) != PROD_ID_1 || (RD_REG_WORD(®->mailbox2) != PROD_ID_2 && RD_REG_WORD(®->mailbox2) != PROD_ID_2a) || RD_REG_WORD(®->mailbox3) != PROD_ID_3 || RD_REG_WORD(®->mailbox4) != PROD_ID_4) { printk(KERN_INFO "qla1280: Wrong product ID = " "0x%x,0x%x,0x%x,0x%x\n", RD_REG_WORD(®->mailbox1), RD_REG_WORD(®->mailbox2), RD_REG_WORD(®->mailbox3), RD_REG_WORD(®->mailbox4)); goto fail; } /* * Enable ints early!!! */ qla1280_enable_intrs(ha); dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n"); /* Wrap Incoming Mailboxes Test. */ mb[0] = MBC_MAILBOX_REGISTER_TEST; mb[1] = 0xAAAA; mb[2] = 0x5555; mb[3] = 0xAA55; mb[4] = 0x55AA; mb[5] = 0xA5A5; mb[6] = 0x5A5A; mb[7] = 0x2525; status = qla1280_mailbox_command(ha, 0xff, mb); if (status) goto fail; if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 || mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A || mb[7] != 0x2525) { printk(KERN_INFO "qla1280: Failed mbox check\n"); goto fail; } dprintk(3, "qla1280_chip_diag: exiting normally\n"); return 0; fail: dprintk(2, "qla1280_chip_diag: **** FAILED ****\n"); return status; } static int qla1280_load_firmware_pio(struct scsi_qla_host *ha) { uint16_t risc_address, *risc_code_address, risc_code_size; uint16_t mb[MAILBOX_REGISTER_COUNT], i; int err; /* Load RISC code. */ risc_address = *ql1280_board_tbl[ha->devnum].fwstart; risc_code_address = ql1280_board_tbl[ha->devnum].fwcode; risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen; for (i = 0; i < risc_code_size; i++) { mb[0] = MBC_WRITE_RAM_WORD; mb[1] = risc_address + i; mb[2] = risc_code_address[i]; err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb); if (err) { printk(KERN_ERR "scsi(%li): Failed to load firmware\n", ha->host_no); return err; } } return 0; } #define DUMP_IT_BACK 0 /* for debug of RISC loading */ static int qla1280_load_firmware_dma(struct scsi_qla_host *ha) { uint16_t risc_address, *risc_code_address, risc_code_size; uint16_t mb[MAILBOX_REGISTER_COUNT], cnt; int err = 0, num, i; #if DUMP_IT_BACK uint8_t *sp, *tbuf; dma_addr_t p_tbuf; tbuf = pci_alloc_consistent(ha->pdev, 8000, &p_tbuf); if (!tbuf) return -ENOMEM; #endif /* Load RISC code. */ risc_address = *ql1280_board_tbl[ha->devnum].fwstart; risc_code_address = ql1280_board_tbl[ha->devnum].fwcode; risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen; dprintk(1, "%s: DMA RISC code (%i) words\n", __FUNCTION__, risc_code_size); num = 0; while (risc_code_size > 0) { int warn __attribute__((unused)) = 0; cnt = 2000 >> 1; if (cnt > risc_code_size) cnt = risc_code_size; dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p)," "%d,%d(0x%x)\n", risc_code_address, cnt, num, risc_address); for(i = 0; i < cnt; i++) ((uint16_t *)ha->request_ring)[i] = cpu_to_le16(risc_code_address[i]); mb[0] = MBC_LOAD_RAM; mb[1] = risc_address; mb[4] = cnt; mb[3] = ha->request_dma & 0xffff; mb[2] = (ha->request_dma >> 16) & 0xffff; mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff; mb[6] = pci_dma_hi32(ha->request_dma) >> 16; dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n", __FUNCTION__, mb[0], (void *)(long)ha->request_dma, mb[6], mb[7], mb[2], mb[3]); err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0, mb); if (err) { printk(KERN_ERR "scsi(%li): Failed to load partial " "segment of f\n", ha->host_no); goto out; } #if DUMP_IT_BACK mb[0] = MBC_DUMP_RAM; mb[1] = risc_address; mb[4] = cnt; mb[3] = p_tbuf & 0xffff; mb[2] = (p_tbuf >> 16) & 0xffff; mb[7] = pci_dma_hi32(p_tbuf) & 0xffff; mb[6] = pci_dma_hi32(p_tbuf) >> 16; err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0, mb); if (err) { printk(KERN_ERR "Failed to dump partial segment of f/w\n"); goto out; } sp = (uint8_t *)ha->request_ring; for (i = 0; i < (cnt << 1); i++) { if (tbuf[i] != sp[i] && warn++ < 10) { printk(KERN_ERR "%s: FW compare error @ " "byte(0x%x) loop#=%x\n", __FUNCTION__, i, num); printk(KERN_ERR "%s: FWbyte=%x " "FWfromChip=%x\n", __FUNCTION__, sp[i], tbuf[i]); /*break; */ } } #endif risc_address += cnt; risc_code_size = risc_code_size - cnt; risc_code_address = risc_code_address + cnt; num++; } out: #if DUMP_IT_BACK pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf); #endif return err; } static int qla1280_start_firmware(struct scsi_qla_host *ha) { uint16_t mb[MAILBOX_REGISTER_COUNT]; int err; dprintk(1, "%s: Verifying checksum of loaded RISC code.\n", __FUNCTION__); /* Verify checksum of loaded RISC code. */ mb[0] = MBC_VERIFY_CHECKSUM; /* mb[1] = ql12_risc_code_addr01; */ mb[1] = *ql1280_board_tbl[ha->devnum].fwstart; err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); if (err) { printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no); return err; } /* Start firmware execution. */ dprintk(1, "%s: start firmware running.\n", __FUNCTION__); mb[0] = MBC_EXECUTE_FIRMWARE; mb[1] = *ql1280_board_tbl[ha->devnum].fwstart; err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); if (err) { printk(KERN_ERR "scsi(%li): Failed to start firmware\n", ha->host_no); } return err; } static int qla1280_load_firmware(struct scsi_qla_host *ha) { int err; err = qla1280_chip_diag(ha); if (err) goto out; if (IS_ISP1040(ha)) err = qla1280_load_firmware_pio(ha); else err = qla1280_load_firmware_dma(ha); if (err) goto out; err = qla1280_start_firmware(ha); out: return err; } /* * Initialize rings * * Input: * ha = adapter block pointer. * ha->request_ring = request ring virtual address * ha->response_ring = response ring virtual address * ha->request_dma = request ring physical address * ha->response_dma = response ring physical address * * Returns: * 0 = success. */ static int qla1280_init_rings(struct scsi_qla_host *ha) { uint16_t mb[MAILBOX_REGISTER_COUNT]; int status = 0; ENTER("qla1280_init_rings"); /* Clear outstanding commands array. */ memset(ha->outstanding_cmds, 0, sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS); /* Initialize request queue. */ ha->request_ring_ptr = ha->request_ring; ha->req_ring_index = 0; ha->req_q_cnt = REQUEST_ENTRY_CNT; /* mb[0] = MBC_INIT_REQUEST_QUEUE; */ mb[0] = MBC_INIT_REQUEST_QUEUE_A64; mb[1] = REQUEST_ENTRY_CNT; mb[3] = ha->request_dma & 0xffff; mb[2] = (ha->request_dma >> 16) & 0xffff; mb[4] = 0; mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff; mb[6] = pci_dma_hi32(ha->request_dma) >> 16; if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]))) { /* Initialize response queue. */ ha->response_ring_ptr = ha->response_ring; ha->rsp_ring_index = 0; /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */ mb[0] = MBC_INIT_RESPONSE_QUEUE_A64; mb[1] = RESPONSE_ENTRY_CNT; mb[3] = ha->response_dma & 0xffff; mb[2] = (ha->response_dma >> 16) & 0xffff; mb[5] = 0; mb[7] = pci_dma_hi32(ha->response_dma) & 0xffff; mb[6] = pci_dma_hi32(ha->response_dma) >> 16; status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 | BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]); } if (status) dprintk(2, "qla1280_init_rings: **** FAILED ****\n"); LEAVE("qla1280_init_rings"); return status; } static void qla1280_print_settings(struct nvram *nv) { dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n", nv->bus[0].config_1.initiator_id); dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n", nv->bus[1].config_1.initiator_id); dprintk(1, "qla1280 : bus reset delay[0]=%d\n", nv->bus[0].bus_reset_delay); dprintk(1, "qla1280 : bus reset delay[1]=%d\n", nv->bus[1].bus_reset_delay); dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count); dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay); dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count); dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay); dprintk(1, "qla1280 : async data setup time[0]=%d\n", nv->bus[0].config_2.async_data_setup_time); dprintk(1, "qla1280 : async data setup time[1]=%d\n", nv->bus[1].config_2.async_data_setup_time); dprintk(1, "qla1280 : req/ack active negation[0]=%d\n", nv->bus[0].config_2.req_ack_active_negation); dprintk(1, "qla1280 : req/ack active negation[1]=%d\n", nv->bus[1].config_2.req_ack_active_negation); dprintk(1, "qla1280 : data line active negation[0]=%d\n", nv->bus[0].config_2.data_line_active_negation); dprintk(1, "qla1280 : data line active negation[1]=%d\n", nv->bus[1].config_2.data_line_active_negation); dprintk(1, "qla1280 : disable loading risc code=%d\n", nv->cntr_flags_1.disable_loading_risc_code); dprintk(1, "qla1280 : enable 64bit addressing=%d\n", nv->cntr_flags_1.enable_64bit_addressing); dprintk(1, "qla1280 : selection timeout limit[0]=%d\n", nv->bus[0].selection_timeout); dprintk(1, "qla1280 : selection timeout limit[1]=%d\n", nv->bus[1].selection_timeout); dprintk(1, "qla1280 : max queue depth[0]=%d\n", nv->bus[0].max_queue_depth); dprintk(1, "qla1280 : max queue depth[1]=%d\n", nv->bus[1].max_queue_depth); } static void qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target) { struct nvram *nv = &ha->nvram; nv->bus[bus].target[target].parameter.renegotiate_on_error = 1; nv->bus[bus].target[target].parameter.auto_request_sense = 1; nv->bus[bus].target[target].parameter.tag_queuing = 1; nv->bus[bus].target[target].parameter.enable_sync = 1; #if 1 /* Some SCSI Processors do not seem to like this */ nv->bus[bus].target[target].parameter.enable_wide = 1; #endif nv->bus[bus].target[target].execution_throttle = nv->bus[bus].max_queue_depth - 1; nv->bus[bus].target[target].parameter.parity_checking = 1; nv->bus[bus].target[target].parameter.disconnect_allowed = 1; if (IS_ISP1x160(ha)) { nv->bus[bus].target[target].flags.flags1x160.device_enable = 1; nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e; nv->bus[bus].target[target].sync_period = 9; nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1; nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2; nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1; } else { nv->bus[bus].target[target].flags.flags1x80.device_enable = 1; nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12; nv->bus[bus].target[target].sync_period = 10; } } static void qla1280_set_defaults(struct scsi_qla_host *ha) { struct nvram *nv = &ha->nvram; int bus, target; dprintk(1, "Using defaults for NVRAM: \n"); memset(nv, 0, sizeof(struct nvram)); /* nv->cntr_flags_1.disable_loading_risc_code = 1; */ nv->firmware_feature.f.enable_fast_posting = 1; nv->firmware_feature.f.disable_synchronous_backoff = 1; nv->termination.scsi_bus_0_control = 3; nv->termination.scsi_bus_1_control = 3; nv->termination.auto_term_support = 1; /* * Set default FIFO magic - What appropriate values would be here * is unknown. This is what I have found testing with 12160s. * * Now, I would love the magic decoder ring for this one, the * header file provided by QLogic seems to be bogus or incomplete * at best. */ nv->isp_config.burst_enable = 1; if (IS_ISP1040(ha)) nv->isp_config.fifo_threshold |= 3; else nv->isp_config.fifo_threshold |= 4; if (IS_ISP1x160(ha)) nv->isp_parameter = 0x01; /* fast memory enable */ for (bus = 0; bus < MAX_BUSES; bus++) { nv->bus[bus].config_1.initiator_id = 7; nv->bus[bus].config_2.req_ack_active_negation = 1; nv->bus[bus].config_2.data_line_active_negation = 1; nv->bus[bus].selection_timeout = 250; nv->bus[bus].max_queue_depth = 256; if (IS_ISP1040(ha)) { nv->bus[bus].bus_reset_delay = 3; nv->bus[bus].config_2.async_data_setup_time = 6; nv->bus[bus].retry_delay = 1; } else { nv->bus[bus].bus_reset_delay = 5; nv->bus[bus].config_2.async_data_setup_time = 8; } for (target = 0; target < MAX_TARGETS; target++) qla1280_set_target_defaults(ha, bus, target); } } static int qla1280_config_target(struct scsi_qla_host *ha, int bus, int target) { struct nvram *nv = &ha->nvram; uint16_t mb[MAILBOX_REGISTER_COUNT]; int status, lun; uint16_t flag; /* Set Target Parameters. */ mb[0] = MBC_SET_TARGET_PARAMETERS; mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); /* * Do not enable sync and ppr for the initial INQUIRY run. We * enable this later if we determine the target actually * supports it. */ mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE | TP_WIDE | TP_PARITY | TP_DISCONNECT); if (IS_ISP1x160(ha)) mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8; else mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8; mb[3] |= nv->bus[bus].target[target].sync_period; status = qla1280_mailbox_command(ha, 0x0f, mb); /* Save Tag queuing enable flag. */ flag = (BIT_0 << target) & mb[0]; if (nv->bus[bus].target[target].parameter.tag_queuing) ha->bus_settings[bus].qtag_enables |= flag; /* Save Device enable flag. */ if (IS_ISP1x160(ha)) { if (nv->bus[bus].target[target].flags.flags1x160.device_enable) ha->bus_settings[bus].device_enables |= flag; ha->bus_settings[bus].lun_disables |= 0; } else { if (nv->bus[bus].target[target].flags.flags1x80.device_enable) ha->bus_settings[bus].device_enables |= flag; /* Save LUN disable flag. */ if (nv->bus[bus].target[target].flags.flags1x80.lun_disable) ha->bus_settings[bus].lun_disables |= flag; } /* Set Device Queue Parameters. */ for (lun = 0; lun < MAX_LUNS; lun++) { mb[0] = MBC_SET_DEVICE_QUEUE; mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8); mb[1] |= lun; mb[2] = nv->bus[bus].max_queue_depth; mb[3] = nv->bus[bus].target[target].execution_throttle; status |= qla1280_mailbox_command(ha, 0x0f, mb); } return status; } static int qla1280_config_bus(struct scsi_qla_host *ha, int bus) { struct nvram *nv = &ha->nvram; uint16_t mb[MAILBOX_REGISTER_COUNT]; int target, status; /* SCSI Reset Disable. */ ha->bus_settings[bus].disable_scsi_reset = nv->bus[bus].config_1.scsi_reset_disable; /* Initiator ID. */ ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id; mb[0] = MBC_SET_INITIATOR_ID; mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 : ha->bus_settings[bus].id; status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); /* Reset Delay. */ ha->bus_settings[bus].bus_reset_delay = nv->bus[bus].bus_reset_delay; /* Command queue depth per device. */ ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1; /* Set target parameters. */ for (target = 0; target < MAX_TARGETS; target++) status |= qla1280_config_target(ha, bus, target); return status; } static int qla1280_nvram_config(struct scsi_qla_host *ha) { struct device_reg __iomem *reg = ha->iobase; struct nvram *nv = &ha->nvram; int bus, target, status = 0; uint16_t mb[MAILBOX_REGISTER_COUNT]; ENTER("qla1280_nvram_config"); if (ha->nvram_valid) { /* Always force AUTO sense for LINUX SCSI */ for (bus = 0; bus < MAX_BUSES; bus++) for (target = 0; target < MAX_TARGETS; target++) { nv->bus[bus].target[target].parameter. auto_request_sense = 1; } } else { qla1280_set_defaults(ha); } qla1280_print_settings(nv); /* Disable RISC load of firmware. */ ha->flags.disable_risc_code_load = nv->cntr_flags_1.disable_loading_risc_code; if (IS_ISP1040(ha)) { uint16_t hwrev, cfg1, cdma_conf, ddma_conf; hwrev = RD_REG_WORD(®->cfg_0) & ISP_CFG0_HWMSK; cfg1 = RD_REG_WORD(®->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6); cdma_conf = RD_REG_WORD(®->cdma_cfg); ddma_conf = RD_REG_WORD(®->ddma_cfg); /* Busted fifo, says mjacob. */ if (hwrev != ISP_CFG0_1040A) cfg1 |= nv->isp_config.fifo_threshold << 4; cfg1 |= nv->isp_config.burst_enable << 2; WRT_REG_WORD(®->cfg_1, cfg1); WRT_REG_WORD(®->cdma_cfg, cdma_conf | CDMA_CONF_BENAB); WRT_REG_WORD(®->ddma_cfg, cdma_conf | DDMA_CONF_BENAB); } else { uint16_t cfg1, term; /* Set ISP hardware DMA burst */ cfg1 = nv->isp_config.fifo_threshold << 4; cfg1 |= nv->isp_config.burst_enable << 2; /* Enable DMA arbitration on dual channel controllers */ if (ha->ports > 1) cfg1 |= BIT_13; WRT_REG_WORD(®->cfg_1, cfg1); /* Set SCSI termination. */ WRT_REG_WORD(®->gpio_enable, BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0); term = nv->termination.scsi_bus_1_control; term |= nv->termination.scsi_bus_0_control << 2; term |= nv->termination.auto_term_support << 7; RD_REG_WORD(®->id_l); /* Flush PCI write */ WRT_REG_WORD(®->gpio_data, term); } RD_REG_WORD(®->id_l); /* Flush PCI write */ /* ISP parameter word. */ mb[0] = MBC_SET_SYSTEM_PARAMETER; mb[1] = nv->isp_parameter; status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); if (IS_ISP1x40(ha)) { /* clock rate - for qla1240 and older, only */ mb[0] = MBC_SET_CLOCK_RATE; mb[1] = 40; status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); } /* Firmware feature word. */ mb[0] = MBC_SET_FIRMWARE_FEATURES; mb[1] = nv->firmware_feature.f.enable_fast_posting; mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1; mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5; #if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2) if (ia64_platform_is("sn2")) { printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA " "workaround\n", ha->host_no); mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */ } #endif status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); /* Retry count and delay. */ mb[0] = MBC_SET_RETRY_COUNT; mb[1] = nv->bus[0].retry_count; mb[2] = nv->bus[0].retry_delay; mb[6] = nv->bus[1].retry_count; mb[7] = nv->bus[1].retry_delay; status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 | BIT_1 | BIT_0, &mb[0]); /* ASYNC data setup time. */ mb[0] = MBC_SET_ASYNC_DATA_SETUP; mb[1] = nv->bus[0].config_2.async_data_setup_time; mb[2] = nv->bus[1].config_2.async_data_setup_time; status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]); /* Active negation states. */ mb[0] = MBC_SET_ACTIVE_NEGATION; mb[1] = 0; if (nv->bus[0].config_2.req_ack_active_negation) mb[1] |= BIT_5; if (nv->bus[0].config_2.data_line_active_negation) mb[1] |= BIT_4; mb[2] = 0; if (nv->bus[1].config_2.req_ack_active_negation) mb[2] |= BIT_5; if (nv->bus[1].config_2.data_line_active_negation) mb[2] |= BIT_4; status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb); mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY; mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); /* thingy */ mb[0] = MBC_SET_PCI_CONTROL; mb[1] = BIT_1; /* Data DMA Channel Burst Enable */ mb[2] = BIT_1; /* Command DMA Channel Burst Enable */ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb); mb[0] = MBC_SET_TAG_AGE_LIMIT; mb[1] = 8; status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); /* Selection timeout. */ mb[0] = MBC_SET_SELECTION_TIMEOUT; mb[1] = nv->bus[0].selection_timeout; mb[2] = nv->bus[1].selection_timeout; status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb); for (bus = 0; bus < ha->ports; bus++) status |= qla1280_config_bus(ha, bus); if (status) dprintk(2, "qla1280_nvram_config: **** FAILED ****\n"); LEAVE("qla1280_nvram_config"); return status; } /* * Get NVRAM data word * Calculates word position in NVRAM and calls request routine to * get the word from NVRAM. * * Input: * ha = adapter block pointer. * address = NVRAM word address. * * Returns: * data word. */ static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address) { uint32_t nv_cmd; uint16_t data; nv_cmd = address << 16; nv_cmd |= NV_READ_OP; data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd)); dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = " "0x%x", data); return data; } /* * NVRAM request * Sends read command to NVRAM and gets data from NVRAM. * * Input: * ha = adapter block pointer. * nv_cmd = Bit 26 = start bit * Bit 25, 24 = opcode * Bit 23-16 = address * Bit 15-0 = write data * * Returns: * data word. */ static uint16_t qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd) { struct device_reg __iomem *reg = ha->iobase; int cnt; uint16_t data = 0; uint16_t reg_data; /* Send command to NVRAM. */ nv_cmd <<= 5; for (cnt = 0; cnt < 11; cnt++) { if (nv_cmd & BIT_31) qla1280_nv_write(ha, NV_DATA_OUT); else qla1280_nv_write(ha, 0); nv_cmd <<= 1; } /* Read data from NVRAM. */ for (cnt = 0; cnt < 16; cnt++) { WRT_REG_WORD(®->nvram, (NV_SELECT | NV_CLOCK)); RD_REG_WORD(®->id_l); /* Flush PCI write */ NVRAM_DELAY(); data <<= 1; reg_data = RD_REG_WORD(®->nvram); if (reg_data & NV_DATA_IN) data |= BIT_0; WRT_REG_WORD(®->nvram, NV_SELECT); RD_REG_WORD(®->id_l); /* Flush PCI write */ NVRAM_DELAY(); } /* Deselect chip. */ WRT_REG_WORD(®->nvram, NV_DESELECT); RD_REG_WORD(®->id_l); /* Flush PCI write */ NVRAM_DELAY(); return data; } static void qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data) { struct device_reg __iomem *reg = ha->iobase; WRT_REG_WORD(®->nvram, data | NV_SELECT); RD_REG_WORD(®->id_l); /* Flush PCI write */ NVRAM_DELAY(); WRT_REG_WORD(®->nvram, data | NV_SELECT | NV_CLOCK); RD_REG_WORD(®->id_l); /* Flush PCI write */ NVRAM_DELAY(); WRT_REG_WORD(®->nvram, data | NV_SELECT); RD_REG_WORD(®->id_l); /* Flush PCI write */ NVRAM_DELAY(); } /* * Mailbox Command * Issue mailbox command and waits for completion. * * Input: * ha = adapter block pointer. * mr = mailbox registers to load. * mb = data pointer for mailbox registers. * * Output: * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data. * * Returns: * 0 = success */ static int qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb) { struct device_reg __iomem *reg = ha->iobase; #if 0 LIST_HEAD(done_q); #endif int status = 0; int cnt; uint16_t *optr, *iptr; uint16_t __iomem *mptr; uint16_t data; DECLARE_COMPLETION(wait); struct timer_list timer; ENTER("qla1280_mailbox_command"); if (ha->mailbox_wait) { printk(KERN_ERR "Warning mailbox wait already in use!\n"); } ha->mailbox_wait = &wait; /* * We really should start out by verifying that the mailbox is * available before starting sending the command data */ /* Load mailbox registers. */ mptr = (uint16_t __iomem *) ®->mailbox0; iptr = mb; for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) { if (mr & BIT_0) { WRT_REG_WORD(mptr, (*iptr)); } mr >>= 1; mptr++; iptr++; } /* Issue set host interrupt command. */ /* set up a timer just in case we're really jammed */ init_timer(&timer); timer.expires = jiffies + 20*HZ; timer.data = (unsigned long)ha; timer.function = qla1280_mailbox_timeout; add_timer(&timer); spin_unlock_irq(HOST_LOCK); WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT); data = qla1280_debounce_register(®->istatus); wait_for_completion(&wait); del_timer_sync(&timer); spin_lock_irq(HOST_LOCK); ha->mailbox_wait = NULL; /* Check for mailbox command timeout. */ if (ha->mailbox_out[0] != MBS_CMD_CMP) { printk(KERN_WARNING "qla1280_mailbox_command: Command failed, " "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = " "0x%04x\n", mb[0], ha->mailbox_out[0], RD_REG_WORD(®->istatus)); printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n", RD_REG_WORD(®->mailbox0), RD_REG_WORD(®->mailbox1), RD_REG_WORD(®->mailbox2), RD_REG_WORD(®->mailbox3)); printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n", RD_REG_WORD(®->mailbox4), RD_REG_WORD(®->mailbox5), RD_REG_WORD(®->mailbox6), RD_REG_WORD(®->mailbox7)); status = 1; } /* Load return mailbox registers. */ optr = mb; iptr = (uint16_t *) &ha->mailbox_out[0]; mr = MAILBOX_REGISTER_COUNT; memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t)); #if 0 /* Go check for any response interrupts pending. */ qla1280_isr(ha, &done_q); #endif if (ha->flags.reset_marker) qla1280_rst_aen(ha); #if 0 if (!list_empty(&done_q)) qla1280_done(ha, &done_q); #endif if (status) dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = " "0x%x ****\n", mb[0]); LEAVE("qla1280_mailbox_command"); return status; } /* * qla1280_poll * Polls ISP for interrupts. * * Input: * ha = adapter block pointer. */ static void qla1280_poll(struct scsi_qla_host *ha) { struct device_reg __iomem *reg = ha->iobase; uint16_t data; LIST_HEAD(done_q); /* ENTER("qla1280_poll"); */ /* Check for pending interrupts. */ data = RD_REG_WORD(®->istatus); if (data & RISC_INT) qla1280_isr(ha, &done_q); if (!ha->mailbox_wait) { if (ha->flags.reset_marker) qla1280_rst_aen(ha); } if (!list_empty(&done_q)) qla1280_done(ha); /* LEAVE("qla1280_poll"); */ } /* * qla1280_bus_reset * Issue SCSI bus reset. * * Input: * ha = adapter block pointer. * bus = SCSI bus number. * * Returns: * 0 = success */ static int qla1280_bus_reset(struct scsi_qla_host *ha, int bus) { uint16_t mb[MAILBOX_REGISTER_COUNT]; uint16_t reset_delay; int status; dprintk(3, "qla1280_bus_reset: entered\n"); if (qla1280_verbose) printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n", ha->host_no, bus); reset_delay = ha->bus_settings[bus].bus_reset_delay; mb[0] = MBC_BUS_RESET; mb[1] = reset_delay; mb[2] = (uint16_t) bus; status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]); if (status) { if (ha->bus_settings[bus].failed_reset_count > 2) ha->bus_settings[bus].scsi_bus_dead = 1; ha->bus_settings[bus].failed_reset_count++; } else { spin_unlock_irq(HOST_LOCK); ssleep(reset_delay); spin_lock_irq(HOST_LOCK); ha->bus_settings[bus].scsi_bus_dead = 0; ha->bus_settings[bus].failed_reset_count = 0; ha->bus_settings[bus].reset_marker = 0; /* Issue marker command. */ qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL); } /* * We should probably call qla1280_set_target_parameters() * here as well for all devices on the bus. */ if (status) dprintk(2, "qla1280_bus_reset: **** FAILED ****\n"); else dprintk(3, "qla1280_bus_reset: exiting normally\n"); return status; } /* * qla1280_device_reset * Issue bus device reset message to the target. * * Input: * ha = adapter block pointer. * bus = SCSI BUS number. * target = SCSI ID. * * Returns: * 0 = success */ static int qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target) { uint16_t mb[MAILBOX_REGISTER_COUNT]; int status; ENTER("qla1280_device_reset"); mb[0] = MBC_ABORT_TARGET; mb[1] = (bus ? (target | BIT_7) : target) << 8; mb[2] = 1; status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]); /* Issue marker command. */ qla1280_marker(ha, bus, target, 0, MK_SYNC_ID); if (status) dprintk(2, "qla1280_device_reset: **** FAILED ****\n"); LEAVE("qla1280_device_reset"); return status; } /* * qla1280_abort_device * Issue an abort message to the device * * Input: * ha = adapter block pointer. * bus = SCSI BUS. * target = SCSI ID. * lun = SCSI LUN. * * Returns: * 0 = success */ static int qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun) { uint16_t mb[MAILBOX_REGISTER_COUNT]; int status; ENTER("qla1280_abort_device"); mb[0] = MBC_ABORT_DEVICE; mb[1] = (bus ? target | BIT_7 : target) << 8 | lun; status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]); /* Issue marker command. */ qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN); if (status) dprintk(2, "qla1280_abort_device: **** FAILED ****\n"); LEAVE("qla1280_abort_device"); return status; } /* * qla1280_abort_command * Abort command aborts a specified IOCB. * * Input: * ha = adapter block pointer. * sp = SB structure pointer. * * Returns: * 0 = success */ static int qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle) { uint16_t mb[MAILBOX_REGISTER_COUNT]; unsigned int bus, target, lun; int status; ENTER("qla1280_abort_command"); bus = SCSI_BUS_32(sp->cmd); target = SCSI_TCN_32(sp->cmd); lun = SCSI_LUN_32(sp->cmd); sp->flags |= SRB_ABORT_PENDING; mb[0] = MBC_ABORT_COMMAND; mb[1] = (bus ? target | BIT_7 : target) << 8 | lun; mb[2] = handle >> 16; mb[3] = handle & 0xffff; status = qla1280_mailbox_command(ha, 0x0f, &mb[0]); if (status) { dprintk(2, "qla1280_abort_command: **** FAILED ****\n"); sp->flags &= ~SRB_ABORT_PENDING; } LEAVE("qla1280_abort_command"); return status; } /* * qla1280_reset_adapter * Reset adapter. * * Input: * ha = adapter block pointer. */ static void qla1280_reset_adapter(struct scsi_qla_host *ha) { struct device_reg __iomem *reg = ha->iobase; ENTER("qla1280_reset_adapter"); /* Disable ISP chip */ ha->flags.online = 0; WRT_REG_WORD(®->ictrl, ISP_RESET); WRT_REG_WORD(®->host_cmd, HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS); RD_REG_WORD(®->id_l); /* Flush PCI write */ LEAVE("qla1280_reset_adapter"); } /* * Issue marker command. * Function issues marker IOCB. * * Input: * ha = adapter block pointer. * bus = SCSI BUS number * id = SCSI ID * lun = SCSI LUN * type = marker modifier */ static void qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type) { struct mrk_entry *pkt; ENTER("qla1280_marker"); /* Get request packet. */ if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) { pkt->entry_type = MARKER_TYPE; pkt->lun = (uint8_t) lun; pkt->target = (uint8_t) (bus ? (id | BIT_7) : id); pkt->modifier = type; pkt->entry_status = 0; /* Issue command to ISP */ qla1280_isp_cmd(ha); } LEAVE("qla1280_marker"); } /* * qla1280_64bit_start_scsi * The start SCSI is responsible for building request packets on * request ring and modifying ISP input pointer. * * Input: * ha = adapter block pointer. * sp = SB structure pointer. * * Returns: * 0 = success, was able to issue command. */ #ifdef QLA_64BIT_PTR static int qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) { struct device_reg __iomem *reg = ha->iobase; struct scsi_cmnd *cmd = sp->cmd; cmd_a64_entry_t *pkt; struct scatterlist *sg = NULL; u32 *dword_ptr; dma_addr_t dma_handle; int status = 0; int cnt; int req_cnt; u16 seg_cnt; u8 dir; ENTER("qla1280_64bit_start_scsi:"); /* Calculate number of entries and segments required. */ req_cnt = 1; if (cmd->use_sg) { sg = (struct scatterlist *) cmd->request_buffer; seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg, cmd->sc_data_direction); if (seg_cnt > 2) { req_cnt += (seg_cnt - 2) / 5; if ((seg_cnt - 2) % 5) req_cnt++; } } else if (cmd->request_bufflen) { /* If data transfer. */ seg_cnt = 1; } else { seg_cnt = 0; } if ((req_cnt + 2) >= ha->req_q_cnt) { /* Calculate number of free request entries. */ cnt = RD_REG_WORD(®->mailbox4); if (ha->req_ring_index < cnt) ha->req_q_cnt = cnt - ha->req_ring_index; else ha->req_q_cnt = REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); } dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n", ha->req_q_cnt, seg_cnt); /* If room for request in request ring. */ if ((req_cnt + 2) >= ha->req_q_cnt) { status = 1; dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt=" "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt, req_cnt); goto out; } /* Check for room in outstanding command list. */ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && ha->outstanding_cmds[cnt] != 0; cnt++); if (cnt >= MAX_OUTSTANDING_COMMANDS) { status = 1; dprintk(2, "qla1280_start_scsi: NO ROOM IN " "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt); goto out; } ha->outstanding_cmds[cnt] = sp; ha->req_q_cnt -= req_cnt; CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1); dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp, cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd)); dprintk(2, " bus %i, target %i, lun %i\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE); /* * Build command packet. */ pkt = (cmd_a64_entry_t *) ha->request_ring_ptr; pkt->entry_type = COMMAND_A64_TYPE; pkt->entry_count = (uint8_t) req_cnt; pkt->sys_define = (uint8_t) ha->req_ring_index; pkt->entry_status = 0; pkt->handle = cpu_to_le32(cnt); /* Zero out remaining portion of packet. */ memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8)); /* Set ISP command timeout. */ pkt->timeout = cpu_to_le16(30); /* Set device target ID and LUN */ pkt->lun = SCSI_LUN_32(cmd); pkt->target = SCSI_BUS_32(cmd) ? (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd); /* Enable simple tag queuing if device supports it. */ if (DEV_SIMPLE_TAGS(cmd->device)) pkt->control_flags |= cpu_to_le16(BIT_3); /* Load SCSI command packet. */ pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd)); memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd)); /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */ /* Set transfer direction. */ dir = qla1280_data_direction(cmd); pkt->control_flags |= cpu_to_le16(dir); /* Set total data segment count. */ pkt->dseg_count = cpu_to_le16(seg_cnt); /* * Load data segments. */ if (seg_cnt) { /* If data transfer. */ /* Setup packet address segment pointer. */ dword_ptr = (u32 *)&pkt->dseg_0_address; if (cmd->use_sg) { /* If scatter gather */ /* Load command entry data segments. */ for (cnt = 0; cnt < 2 && seg_cnt; cnt++, seg_cnt--) { dma_handle = sg_dma_address(sg); #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) if (ha->flags.use_pci_vchannel) sn_pci_set_vchan(ha->pdev, (unsigned long *)&dma_handle, SCSI_BUS_32(cmd)); #endif *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle)); *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle)); *dword_ptr++ = cpu_to_le32(sg_dma_len(sg)); sg++; dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n", cpu_to_le32(pci_dma_hi32(dma_handle)), cpu_to_le32(pci_dma_lo32(dma_handle)), cpu_to_le32(sg_dma_len(sg))); } dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather " "command packet data - b %i, t %i, l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); /* * Build continuation packets. */ dprintk(3, "S/G Building Continuation...seg_cnt=0x%x " "remains\n", seg_cnt); while (seg_cnt > 0) { /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { ha->req_ring_index = 0; ha->request_ring_ptr = ha->request_ring; } else ha->request_ring_ptr++; pkt = (cmd_a64_entry_t *)ha->request_ring_ptr; /* Zero out packet. */ memset(pkt, 0, REQUEST_ENTRY_SIZE); /* Load packet defaults. */ ((struct cont_a64_entry *) pkt)->entry_type = CONTINUE_A64_TYPE; ((struct cont_a64_entry *) pkt)->entry_count = 1; ((struct cont_a64_entry *) pkt)->sys_define = (uint8_t)ha->req_ring_index; /* Setup packet address segment pointer. */ dword_ptr = (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address; /* Load continuation entry data segments. */ for (cnt = 0; cnt < 5 && seg_cnt; cnt++, seg_cnt--) { dma_handle = sg_dma_address(sg); #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) if (ha->flags.use_pci_vchannel) sn_pci_set_vchan(ha->pdev, (unsigned long *)&dma_handle, SCSI_BUS_32(cmd)); #endif *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle)); *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle)); *dword_ptr++ = cpu_to_le32(sg_dma_len(sg)); dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n", cpu_to_le32(pci_dma_hi32(dma_handle)), cpu_to_le32(pci_dma_lo32(dma_handle)), cpu_to_le32(sg_dma_len(sg))); sg++; } dprintk(5, "qla1280_64bit_start_scsi: " "continuation packet data - b %i, t " "%i, l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); } } else { /* No scatter gather data transfer */ dma_handle = pci_map_single(ha->pdev, cmd->request_buffer, cmd->request_bufflen, cmd->sc_data_direction); sp->saved_dma_handle = dma_handle; #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) if (ha->flags.use_pci_vchannel) sn_pci_set_vchan(ha->pdev, (unsigned long *)&dma_handle, SCSI_BUS_32(cmd)); #endif *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle)); *dword_ptr++ = cpu_to_le32(pci_dma_hi32(dma_handle)); *dword_ptr = cpu_to_le32(cmd->request_bufflen); dprintk(5, "qla1280_64bit_start_scsi: No scatter/" "gather command packet data - b %i, t %i, " "l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); } } else { /* No data transfer */ dprintk(5, "qla1280_64bit_start_scsi: No data, command " "packet data - b %i, t %i, l %i \n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); } /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { ha->req_ring_index = 0; ha->request_ring_ptr = ha->request_ring; } else ha->request_ring_ptr++; /* Set chip new ring index. */ dprintk(2, "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n"); sp->flags |= SRB_SENT; ha->actthreads++; WRT_REG_WORD(®->mailbox4, ha->req_ring_index); /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */ mmiowb(); out: if (status) dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n"); else dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n"); return status; } #else /* !QLA_64BIT_PTR */ /* * qla1280_32bit_start_scsi * The start SCSI is responsible for building request packets on * request ring and modifying ISP input pointer. * * The Qlogic firmware interface allows every queue slot to have a SCSI * command and up to 4 scatter/gather (SG) entries. If we need more * than 4 SG entries, then continuation entries are used that can * hold another 7 entries each. The start routine determines if there * is eought empty slots then build the combination of requests to * fulfill the OS request. * * Input: * ha = adapter block pointer. * sp = SCSI Request Block structure pointer. * * Returns: * 0 = success, was able to issue command. */ static int qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) { struct device_reg __iomem *reg = ha->iobase; struct scsi_cmnd *cmd = sp->cmd; struct cmd_entry *pkt; struct scatterlist *sg = NULL; uint32_t *dword_ptr; int status = 0; int cnt; int req_cnt; uint16_t seg_cnt; dma_addr_t dma_handle; u8 dir; ENTER("qla1280_32bit_start_scsi"); dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp, cmd->cmnd[0]); /* Calculate number of entries and segments required. */ req_cnt = 1; if (cmd->use_sg) { /* * We must build an SG list in adapter format, as the kernel's * SG list cannot be used directly because of data field size * (__alpha__) differences and the kernel SG list uses virtual * addresses where we need physical addresses. */ sg = (struct scatterlist *) cmd->request_buffer; seg_cnt = pci_map_sg(ha->pdev, sg, cmd->use_sg, cmd->sc_data_direction); /* * if greater than four sg entries then we need to allocate * continuation entries */ if (seg_cnt > 4) { req_cnt += (seg_cnt - 4) / 7; if ((seg_cnt - 4) % 7) req_cnt++; } dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n", cmd, seg_cnt, req_cnt); } else if (cmd->request_bufflen) { /* If data transfer. */ dprintk(3, "No S/G transfer t=%x cmd=%p len=%x CDB=%x\n", SCSI_TCN_32(cmd), cmd, cmd->request_bufflen, cmd->cmnd[0]); seg_cnt = 1; } else { /* dprintk(1, "No data transfer \n"); */ seg_cnt = 0; } if ((req_cnt + 2) >= ha->req_q_cnt) { /* Calculate number of free request entries. */ cnt = RD_REG_WORD(®->mailbox4); if (ha->req_ring_index < cnt) ha->req_q_cnt = cnt - ha->req_ring_index; else ha->req_q_cnt = REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); } dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n", ha->req_q_cnt, seg_cnt); /* If room for request in request ring. */ if ((req_cnt + 2) >= ha->req_q_cnt) { status = 1; dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, " "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt, req_cnt); goto out; } /* Check for empty slot in outstanding command list. */ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && (ha->outstanding_cmds[cnt] != 0); cnt++) ; if (cnt >= MAX_OUTSTANDING_COMMANDS) { status = 1; dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING " "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt); goto out; } CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1); ha->outstanding_cmds[cnt] = sp; ha->req_q_cnt -= req_cnt; /* * Build command packet. */ pkt = (struct cmd_entry *) ha->request_ring_ptr; pkt->entry_type = COMMAND_TYPE; pkt->entry_count = (uint8_t) req_cnt; pkt->sys_define = (uint8_t) ha->req_ring_index; pkt->entry_status = 0; pkt->handle = cpu_to_le32(cnt); /* Zero out remaining portion of packet. */ memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8)); /* Set ISP command timeout. */ pkt->timeout = cpu_to_le16(30); /* Set device target ID and LUN */ pkt->lun = SCSI_LUN_32(cmd); pkt->target = SCSI_BUS_32(cmd) ? (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd); /* Enable simple tag queuing if device supports it. */ if (DEV_SIMPLE_TAGS(cmd->device)) pkt->control_flags |= cpu_to_le16(BIT_3); /* Load SCSI command packet. */ pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd)); memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd)); /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */ /* Set transfer direction. */ dir = qla1280_data_direction(cmd); pkt->control_flags |= cpu_to_le16(dir); /* Set total data segment count. */ pkt->dseg_count = cpu_to_le16(seg_cnt); /* * Load data segments. */ if (seg_cnt) { /* Setup packet address segment pointer. */ dword_ptr = &pkt->dseg_0_address; if (cmd->use_sg) { /* If scatter gather */ dprintk(3, "Building S/G data segments..\n"); qla1280_dump_buffer(1, (char *)sg, 4 * 16); /* Load command entry data segments. */ for (cnt = 0; cnt < 4 && seg_cnt; cnt++, seg_cnt--) { *dword_ptr++ = cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))); *dword_ptr++ = cpu_to_le32(sg_dma_len(sg)); dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n", (pci_dma_lo32(sg_dma_address(sg))), (sg_dma_len(sg))); sg++; } /* * Build continuation packets. */ dprintk(3, "S/G Building Continuation" "...seg_cnt=0x%x remains\n", seg_cnt); while (seg_cnt > 0) { /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { ha->req_ring_index = 0; ha->request_ring_ptr = ha->request_ring; } else ha->request_ring_ptr++; pkt = (struct cmd_entry *)ha->request_ring_ptr; /* Zero out packet. */ memset(pkt, 0, REQUEST_ENTRY_SIZE); /* Load packet defaults. */ ((struct cont_entry *) pkt)-> entry_type = CONTINUE_TYPE; ((struct cont_entry *) pkt)->entry_count = 1; ((struct cont_entry *) pkt)->sys_define = (uint8_t) ha->req_ring_index; /* Setup packet address segment pointer. */ dword_ptr = &((struct cont_entry *) pkt)->dseg_0_address; /* Load continuation entry data segments. */ for (cnt = 0; cnt < 7 && seg_cnt; cnt++, seg_cnt--) { *dword_ptr++ = cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))); *dword_ptr++ = cpu_to_le32(sg_dma_len(sg)); dprintk(1, "S/G Segment Cont. phys_addr=0x%x, " "len=0x%x\n", cpu_to_le32(pci_dma_lo32(sg_dma_address(sg))), cpu_to_le32(sg_dma_len(sg))); sg++; } dprintk(5, "qla1280_32bit_start_scsi: " "continuation packet data - " "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); } } else { /* No S/G data transfer */ dma_handle = pci_map_single(ha->pdev, cmd->request_buffer, cmd->request_bufflen, cmd->sc_data_direction); sp->saved_dma_handle = dma_handle; *dword_ptr++ = cpu_to_le32(pci_dma_lo32(dma_handle)); *dword_ptr = cpu_to_le32(cmd->request_bufflen); } } else { /* No data transfer at all */ dprintk(5, "qla1280_32bit_start_scsi: No data, command " "packet data - \n"); qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE); } dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n"); qla1280_dump_buffer(5, (char *)ha->request_ring_ptr, REQUEST_ENTRY_SIZE); /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { ha->req_ring_index = 0; ha->request_ring_ptr = ha->request_ring; } else ha->request_ring_ptr++; /* Set chip new ring index. */ dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC " "for pending command\n"); sp->flags |= SRB_SENT; ha->actthreads++; WRT_REG_WORD(®->mailbox4, ha->req_ring_index); /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */ mmiowb(); out: if (status) dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n"); LEAVE("qla1280_32bit_start_scsi"); return status; } #endif /* * qla1280_req_pkt * Function is responsible for locking ring and * getting a zeroed out request packet. * * Input: * ha = adapter block pointer. * * Returns: * 0 = failed to get slot. */ static request_t * qla1280_req_pkt(struct scsi_qla_host *ha) { struct device_reg __iomem *reg = ha->iobase; request_t *pkt = NULL; int cnt; uint32_t timer; ENTER("qla1280_req_pkt"); /* * This can be called from interrupt context, damn it!!! */ /* Wait for 30 seconds for slot. */ for (timer = 15000000; timer; timer--) { if (ha->req_q_cnt > 0) { /* Calculate number of free request entries. */ cnt = RD_REG_WORD(®->mailbox4); if (ha->req_ring_index < cnt) ha->req_q_cnt = cnt - ha->req_ring_index; else ha->req_q_cnt = REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); } /* Found empty request ring slot? */ if (ha->req_q_cnt > 0) { ha->req_q_cnt--; pkt = ha->request_ring_ptr; /* Zero out packet. */ memset(pkt, 0, REQUEST_ENTRY_SIZE); /* * How can this be right when we have a ring * size of 512??? */ /* Set system defined field. */ pkt->sys_define = (uint8_t) ha->req_ring_index; /* Set entry count. */ pkt->entry_count = 1; break; } udelay(2); /* 10 */ /* Check for pending interrupts. */ qla1280_poll(ha); } if (!pkt) dprintk(2, "qla1280_req_pkt: **** FAILED ****\n"); else dprintk(3, "qla1280_req_pkt: exiting normally\n"); return pkt; } /* * qla1280_isp_cmd * Function is responsible for modifying ISP input pointer. * Releases ring lock. * * Input: * ha = adapter block pointer. */ static void qla1280_isp_cmd(struct scsi_qla_host *ha) { struct device_reg __iomem *reg = ha->iobase; ENTER("qla1280_isp_cmd"); dprintk(5, "qla1280_isp_cmd: IOCB data:\n"); qla1280_dump_buffer(5, (char *)ha->request_ring_ptr, REQUEST_ENTRY_SIZE); /* Adjust ring index. */ ha->req_ring_index++; if (ha->req_ring_index == REQUEST_ENTRY_CNT) { ha->req_ring_index = 0; ha->request_ring_ptr = ha->request_ring; } else ha->request_ring_ptr++; /* * Update request index to mailbox4 (Request Queue In). * The mmiowb() ensures that this write is ordered with writes by other * CPUs. Without the mmiowb(), it is possible for the following: * CPUA posts write of index 5 to mailbox4 * CPUA releases host lock * CPUB acquires host lock * CPUB posts write of index 6 to mailbox4 * On PCI bus, order reverses and write of 6 posts, then index 5, * causing chip to issue full queue of stale commands * The mmiowb() prevents future writes from crossing the barrier. * See Documentation/DocBook/deviceiobook.tmpl for more information. */ WRT_REG_WORD(®->mailbox4, ha->req_ring_index); mmiowb(); LEAVE("qla1280_isp_cmd"); } /****************************************************************************/ /* Interrupt Service Routine. */ /****************************************************************************/ /**************************************************************************** * qla1280_isr * Calls I/O done on command completion. * * Input: * ha = adapter block pointer. * done_q = done queue. ****************************************************************************/ static void qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q) { struct device_reg __iomem *reg = ha->iobase; struct response *pkt; struct srb *sp = NULL; uint16_t mailbox[MAILBOX_REGISTER_COUNT]; uint16_t *wptr; uint32_t index; u16 istatus; ENTER("qla1280_isr"); istatus = RD_REG_WORD(®->istatus); if (!(istatus & (RISC_INT | PCI_INT))) return; /* Save mailbox register 5 */ mailbox[5] = RD_REG_WORD(®->mailbox5); /* Check for mailbox interrupt. */ mailbox[0] = RD_REG_WORD_dmasync(®->semaphore); if (mailbox[0] & BIT_0) { /* Get mailbox data. */ /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */ wptr = &mailbox[0]; *wptr++ = RD_REG_WORD(®->mailbox0); *wptr++ = RD_REG_WORD(®->mailbox1); *wptr = RD_REG_WORD(®->mailbox2); if (mailbox[0] != MBA_SCSI_COMPLETION) { wptr++; *wptr++ = RD_REG_WORD(®->mailbox3); *wptr++ = RD_REG_WORD(®->mailbox4); wptr++; *wptr++ = RD_REG_WORD(®->mailbox6); *wptr = RD_REG_WORD(®->mailbox7); } /* Release mailbox registers. */ WRT_REG_WORD(®->semaphore, 0); WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT); dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x", mailbox[0]); /* Handle asynchronous event */ switch (mailbox[0]) { case MBA_SCSI_COMPLETION: /* Response completion */ dprintk(5, "qla1280_isr: mailbox SCSI response " "completion\n"); if (ha->flags.online) { /* Get outstanding command index. */ index = mailbox[2] << 16 | mailbox[1]; /* Validate handle. */ if (index < MAX_OUTSTANDING_COMMANDS) sp = ha->outstanding_cmds[index]; else sp = NULL; if (sp) { /* Free outstanding command slot. */ ha->outstanding_cmds[index] = NULL; /* Save ISP completion status */ CMD_RESULT(sp->cmd) = 0; /* Place block on done queue */ list_add_tail(&sp->list, done_q); } else { /* * If we get here we have a real problem! */ printk(KERN_WARNING "qla1280: ISP invalid handle"); } } break; case MBA_BUS_RESET: /* SCSI Bus Reset */ ha->flags.reset_marker = 1; index = mailbox[6] & BIT_0; ha->bus_settings[index].reset_marker = 1; printk(KERN_DEBUG "qla1280_isr(): index %i " "asynchronous BUS_RESET\n", index); break; case MBA_SYSTEM_ERR: /* System Error */ printk(KERN_WARNING "qla1280: ISP System Error - mbx1=%xh, mbx2=" "%xh, mbx3=%xh\n", mailbox[1], mailbox[2], mailbox[3]); break; case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */ printk(KERN_WARNING "qla1280: ISP Request Transfer Error\n"); break; case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */ printk(KERN_WARNING "qla1280: ISP Response Transfer Error\n"); break; case MBA_WAKEUP_THRES: /* Request Queue Wake-up */ dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n"); break; case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */ dprintk(2, "qla1280_isr: asynchronous TIMEOUT_RESET\n"); break; case MBA_DEVICE_RESET: /* Bus Device Reset */ printk(KERN_INFO "qla1280_isr(): asynchronous " "BUS_DEVICE_RESET\n"); ha->flags.reset_marker = 1; index = mailbox[6] & BIT_0; ha->bus_settings[index].reset_marker = 1; break; case MBA_BUS_MODE_CHANGE: dprintk(2, "qla1280_isr: asynchronous BUS_MODE_CHANGE\n"); break; default: /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */ if (mailbox[0] < MBA_ASYNC_EVENT) { wptr = &mailbox[0]; memcpy((uint16_t *) ha->mailbox_out, wptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t)); if(ha->mailbox_wait != NULL) complete(ha->mailbox_wait); } break; } } else { WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT); } /* * We will receive interrupts during mailbox testing prior to * the card being marked online, hence the double check. */ if (!(ha->flags.online && !ha->mailbox_wait)) { dprintk(2, "qla1280_isr: Response pointer Error\n"); goto out; } if (mailbox[5] >= RESPONSE_ENTRY_CNT) goto out; while (ha->rsp_ring_index != mailbox[5]) { pkt = ha->response_ring_ptr; dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]" " = 0x%x\n", ha->rsp_ring_index, mailbox[5]); dprintk(5,"qla1280_isr: response packet data\n"); qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE); if (pkt->entry_type == STATUS_TYPE) { if ((le16_to_cpu(pkt->scsi_status) & 0xff) || pkt->comp_status || pkt->entry_status) { dprintk(2, "qla1280_isr: ha->rsp_ring_index = " "0x%x mailbox[5] = 0x%x, comp_status " "= 0x%x, scsi_status = 0x%x\n", ha->rsp_ring_index, mailbox[5], le16_to_cpu(pkt->comp_status), le16_to_cpu(pkt->scsi_status)); } } else { dprintk(2, "qla1280_isr: ha->rsp_ring_index = " "0x%x, mailbox[5] = 0x%x\n", ha->rsp_ring_index, mailbox[5]); dprintk(2, "qla1280_isr: response packet data\n"); qla1280_dump_buffer(2, (char *)pkt, RESPONSE_ENTRY_SIZE); } if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) { dprintk(2, "status: Cmd %p, handle %i\n", ha->outstanding_cmds[pkt->handle]->cmd, pkt->handle); if (pkt->entry_type == STATUS_TYPE) qla1280_status_entry(ha, pkt, done_q); else qla1280_error_entry(ha, pkt, done_q); /* Adjust ring index. */ ha->rsp_ring_index++; if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) { ha->rsp_ring_index = 0; ha->response_ring_ptr = ha->response_ring; } else ha->response_ring_ptr++; WRT_REG_WORD(®->mailbox5, ha->rsp_ring_index); } } out: LEAVE("qla1280_isr"); } /* * qla1280_rst_aen * Processes asynchronous reset. * * Input: * ha = adapter block pointer. */ static void qla1280_rst_aen(struct scsi_qla_host *ha) { uint8_t bus; ENTER("qla1280_rst_aen"); if (ha->flags.online && !ha->flags.reset_active && !ha->flags.abort_isp_active) { ha->flags.reset_active = 1; while (ha->flags.reset_marker) { /* Issue marker command. */ ha->flags.reset_marker = 0; for (bus = 0; bus < ha->ports && !ha->flags.reset_marker; bus++) { if (ha->bus_settings[bus].reset_marker) { ha->bus_settings[bus].reset_marker = 0; qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL); } } } } LEAVE("qla1280_rst_aen"); } #if LINUX_VERSION_CODE < 0x020500 /* * */ static void qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha) { unsigned char *result; struct nvram *n; int bus, target, lun; bus = SCSI_BUS_32(cmd); target = SCSI_TCN_32(cmd); lun = SCSI_LUN_32(cmd); /* * Make sure to not touch anything if someone is using the * sg interface. */ if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun) return; result = cmd->request_buffer; n = &ha->nvram; n->bus[bus].target[target].parameter.enable_wide = 0; n->bus[bus].target[target].parameter.enable_sync = 0; n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0; if (result[7] & 0x60) n->bus[bus].target[target].parameter.enable_wide = 1; if (result[7] & 0x10) n->bus[bus].target[target].parameter.enable_sync = 1; if ((result[2] >= 3) && (result[4] + 5 > 56) && (result[56] & 0x4)) n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1; dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n", n->bus[bus].target[target].parameter.enable_wide, n->bus[bus].target[target].parameter.enable_sync, n->bus[bus].target[target].ppr_1x160.flags.enable_ppr); } #endif /* * qla1280_status_entry * Processes received ISP status entry. * * Input: * ha = adapter block pointer. * pkt = entry pointer. * done_q = done queue. */ static void qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt, struct list_head *done_q) { unsigned int bus, target, lun; int sense_sz; struct srb *sp; struct scsi_cmnd *cmd; uint32_t handle = le32_to_cpu(pkt->handle); uint16_t scsi_status = le16_to_cpu(pkt->scsi_status); uint16_t comp_status = le16_to_cpu(pkt->comp_status); ENTER("qla1280_status_entry"); /* Validate handle. */ if (handle < MAX_OUTSTANDING_COMMANDS) sp = ha->outstanding_cmds[handle]; else sp = NULL; if (!sp) { printk(KERN_WARNING "qla1280: Status Entry invalid handle\n"); goto out; } /* Free outstanding command slot. */ ha->outstanding_cmds[handle] = NULL; cmd = sp->cmd; /* Generate LU queue on cntrl, target, LUN */ bus = SCSI_BUS_32(cmd); target = SCSI_TCN_32(cmd); lun = SCSI_LUN_32(cmd); if (comp_status || scsi_status) { dprintk(3, "scsi: comp_status = 0x%x, scsi_status = " "0x%x, handle = 0x%x\n", comp_status, scsi_status, handle); } /* Target busy or queue full */ if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL || (scsi_status & 0xFF) == SAM_STAT_BUSY) { CMD_RESULT(cmd) = scsi_status & 0xff; } else { /* Save ISP completion status */ CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd); if (scsi_status & SAM_STAT_CHECK_CONDITION) { if (comp_status != CS_ARS_FAILED) { uint16_t req_sense_length = le16_to_cpu(pkt->req_sense_length); if (req_sense_length < CMD_SNSLEN(cmd)) sense_sz = req_sense_length; else /* * scsi_cmnd->sense_buffer is * 64 bytes, why only copy 63? * This looks wrong! /Jes */ sense_sz = CMD_SNSLEN(cmd) - 1; memcpy(cmd->sense_buffer, &pkt->req_sense_data, sense_sz); } else sense_sz = 0; memset(cmd->sense_buffer + sense_sz, 0, sizeof(cmd->sense_buffer) - sense_sz); dprintk(2, "qla1280_status_entry: Check " "condition Sense data, b %i, t %i, " "l %i\n", bus, target, lun); if (sense_sz) qla1280_dump_buffer(2, (char *)cmd->sense_buffer, sense_sz); } } /* Place command on done queue. */ list_add_tail(&sp->list, done_q); out: LEAVE("qla1280_status_entry"); } /* * qla1280_error_entry * Processes error entry. * * Input: * ha = adapter block pointer. * pkt = entry pointer. * done_q = done queue. */ static void qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt, struct list_head *done_q) { struct srb *sp; uint32_t handle = le32_to_cpu(pkt->handle); ENTER("qla1280_error_entry"); if (pkt->entry_status & BIT_3) dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n"); else if (pkt->entry_status & BIT_2) dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n"); else if (pkt->entry_status & BIT_1) dprintk(2, "qla1280_error_entry: FULL flag error\n"); else dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n"); /* Validate handle. */ if (handle < MAX_OUTSTANDING_COMMANDS) sp = ha->outstanding_cmds[handle]; else sp = NULL; if (sp) { /* Free outstanding command slot. */ ha->outstanding_cmds[handle] = NULL; /* Bad payload or header */ if (pkt->entry_status & (BIT_3 + BIT_2)) { /* Bad payload or header, set error status. */ /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */ CMD_RESULT(sp->cmd) = DID_ERROR << 16; } else if (pkt->entry_status & BIT_1) { /* FULL flag */ CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16; } else { /* Set error status. */ CMD_RESULT(sp->cmd) = DID_ERROR << 16; } /* Place command on done queue. */ list_add_tail(&sp->list, done_q); } #ifdef QLA_64BIT_PTR else if (pkt->entry_type == COMMAND_A64_TYPE) { printk(KERN_WARNING "!qla1280: Error Entry invalid handle"); } #endif LEAVE("qla1280_error_entry"); } /* * qla1280_abort_isp * Resets ISP and aborts all outstanding commands. * * Input: * ha = adapter block pointer. * * Returns: * 0 = success */ static int qla1280_abort_isp(struct scsi_qla_host *ha) { struct device_reg __iomem *reg = ha->iobase; struct srb *sp; int status = 0; int cnt; int bus; ENTER("qla1280_abort_isp"); if (ha->flags.abort_isp_active || !ha->flags.online) goto out; ha->flags.abort_isp_active = 1; /* Disable ISP interrupts. */ qla1280_disable_intrs(ha); WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC); RD_REG_WORD(®->id_l); printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n", ha->host_no); /* Dequeue all commands in outstanding command list. */ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { struct scsi_cmnd *cmd; sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; CMD_RESULT(cmd) = DID_RESET << 16; sp->cmd = NULL; ha->outstanding_cmds[cnt] = NULL; (*cmd->scsi_done)(cmd); sp->flags = 0; } } status = qla1280_load_firmware(ha); if (status) goto out; /* Setup adapter based on NVRAM parameters. */ qla1280_nvram_config (ha); status = qla1280_init_rings(ha); if (status) goto out; /* Issue SCSI reset. */ for (bus = 0; bus < ha->ports; bus++) qla1280_bus_reset(ha, bus); ha->flags.abort_isp_active = 0; out: if (status) { printk(KERN_WARNING "qla1280: ISP error recovery failed, board disabled"); qla1280_reset_adapter(ha); dprintk(2, "qla1280_abort_isp: **** FAILED ****\n"); } LEAVE("qla1280_abort_isp"); return status; } /* * qla1280_debounce_register * Debounce register. * * Input: * port = register address. * * Returns: * register value. */ static u16 qla1280_debounce_register(volatile u16 __iomem * addr) { volatile u16 ret; volatile u16 ret2; ret = RD_REG_WORD(addr); ret2 = RD_REG_WORD(addr); if (ret == ret2) return ret; do { cpu_relax(); ret = RD_REG_WORD(addr); ret2 = RD_REG_WORD(addr); } while (ret != ret2); return ret; } /************************************************************************ * qla1280_check_for_dead_scsi_bus * * * * This routine checks for a dead SCSI bus * ************************************************************************/ #define SET_SXP_BANK 0x0100 #define SCSI_PHASE_INVALID 0x87FF static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus) { uint16_t config_reg, scsi_control; struct device_reg __iomem *reg = ha->iobase; if (ha->bus_settings[bus].scsi_bus_dead) { WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC); config_reg = RD_REG_WORD(®->cfg_1); WRT_REG_WORD(®->cfg_1, SET_SXP_BANK); scsi_control = RD_REG_WORD(®->scsiControlPins); WRT_REG_WORD(®->cfg_1, config_reg); WRT_REG_WORD(®->host_cmd, HC_RELEASE_RISC); if (scsi_control == SCSI_PHASE_INVALID) { ha->bus_settings[bus].scsi_bus_dead = 1; #if 0 CMD_RESULT(cp) = DID_NO_CONNECT << 16; CMD_HANDLE(cp) = INVALID_HANDLE; /* ha->actthreads--; */ (*(cp)->scsi_done)(cp); #endif return 1; /* bus is dead */ } else { ha->bus_settings[bus].scsi_bus_dead = 0; ha->bus_settings[bus].failed_reset_count = 0; } } return 0; /* bus is not dead */ } static void qla1280_get_target_parameters(struct scsi_qla_host *ha, struct scsi_device *device) { uint16_t mb[MAILBOX_REGISTER_COUNT]; int bus, target, lun; bus = device->channel; target = device->id; lun = device->lun; mb[0] = MBC_GET_TARGET_PARAMETERS; mb[1] = (uint16_t) (bus ? target | BIT_7 : target); mb[1] <<= 8; qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]); printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun); if (mb[3] != 0) { printk(" Sync: period %d, offset %d", (mb[3] & 0xff), (mb[3] >> 8)); if (mb[2] & BIT_13) printk(", Wide"); if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2) printk(", DT"); } else printk(" Async"); if (DEV_SIMPLE_TAGS(device)) printk(", Tagged queuing: depth %d", device->queue_depth); printk("\n"); } #if DEBUG_QLA1280 static void __qla1280_dump_buffer(char *b, int size) { int cnt; u8 c; printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah " "Bh Ch Dh Eh Fh\n"); printk(KERN_DEBUG "---------------------------------------------" "------------------\n"); for (cnt = 0; cnt < size;) { c = *b++; printk("0x%02x", c); cnt++; if (!(cnt % 16)) printk("\n"); else printk(" "); } if (cnt % 16) printk("\n"); } /************************************************************************** * ql1280_print_scsi_cmd * **************************************************************************/ static void __qla1280_print_scsi_cmd(struct scsi_cmnd *cmd) { struct scsi_qla_host *ha; struct Scsi_Host *host = CMD_HOST(cmd); struct srb *sp; /* struct scatterlist *sg; */ int i; ha = (struct scsi_qla_host *)host->hostdata; sp = (struct srb *)CMD_SP(cmd); printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd)); printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd), CMD_CDBLEN(cmd)); printk(" CDB = "); for (i = 0; i < cmd->cmd_len; i++) { printk("0x%02x ", cmd->cmnd[i]); } printk(" seg_cnt =%d\n", cmd->use_sg); printk(" request buffer=0x%p, request buffer len=0x%x\n", cmd->request_buffer, cmd->request_bufflen); /* if (cmd->use_sg) { sg = (struct scatterlist *) cmd->request_buffer; printk(" SG buffer: \n"); qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist))); } */ printk(" tag=%d, transfersize=0x%x \n", cmd->tag, cmd->transfersize); printk(" Pid=%li, SP=0x%p\n", cmd->pid, CMD_SP(cmd)); printk(" underflow size = 0x%x, direction=0x%x\n", cmd->underflow, cmd->sc_data_direction); } /************************************************************************** * ql1280_dump_device * **************************************************************************/ static void ql1280_dump_device(struct scsi_qla_host *ha) { struct scsi_cmnd *cp; struct srb *sp; int i; printk(KERN_DEBUG "Outstanding Commands on controller:\n"); for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) { if ((sp = ha->outstanding_cmds[i]) == NULL) continue; if ((cp = sp->cmd) == NULL) continue; qla1280_print_scsi_cmd(1, cp); } } #endif enum tokens { TOKEN_NVRAM, TOKEN_SYNC, TOKEN_WIDE, TOKEN_PPR, TOKEN_VERBOSE, TOKEN_DEBUG, }; struct setup_tokens { char *token; int val; }; static struct setup_tokens setup_token[] __initdata = { { "nvram", TOKEN_NVRAM }, { "sync", TOKEN_SYNC }, { "wide", TOKEN_WIDE }, { "ppr", TOKEN_PPR }, { "verbose", TOKEN_VERBOSE }, { "debug", TOKEN_DEBUG }, }; /************************************************************************** * qla1280_setup * * Handle boot parameters. This really needs to be changed so one * can specify per adapter parameters. **************************************************************************/ static int __init qla1280_setup(char *s) { char *cp, *ptr; unsigned long val; int toke; cp = s; while (cp && (ptr = strchr(cp, ':'))) { ptr++; if (!strcmp(ptr, "yes")) { val = 0x10000; ptr += 3; } else if (!strcmp(ptr, "no")) { val = 0; ptr += 2; } else val = simple_strtoul(ptr, &ptr, 0); switch ((toke = qla1280_get_token(cp))) { case TOKEN_NVRAM: if (!val) driver_setup.no_nvram = 1; break; case TOKEN_SYNC: if (!val) driver_setup.no_sync = 1; else if (val != 0x10000) driver_setup.sync_mask = val; break; case TOKEN_WIDE: if (!val) driver_setup.no_wide = 1; else if (val != 0x10000) driver_setup.wide_mask = val; break; case TOKEN_PPR: if (!val) driver_setup.no_ppr = 1; else if (val != 0x10000) driver_setup.ppr_mask = val; break; case TOKEN_VERBOSE: qla1280_verbose = val; break; default: printk(KERN_INFO "qla1280: unknown boot option %s\n", cp); } cp = strchr(ptr, ';'); if (cp) cp++; else { break; } } return 1; } static int qla1280_get_token(char *str) { char *sep; long ret = -1; int i, len; len = sizeof(setup_token)/sizeof(struct setup_tokens); sep = strchr(str, ':'); if (sep) { for (i = 0; i < len; i++){ if (!strncmp(setup_token[i].token, str, (sep - str))) { ret = setup_token[i].val; break; } } } return ret; } #if LINUX_VERSION_CODE >= 0x020600 static struct scsi_host_template qla1280_driver_template = { .module = THIS_MODULE, .proc_name = "qla1280", .name = "Qlogic ISP 1280/12160", .info = qla1280_info, .slave_configure = qla1280_slave_configure, .queuecommand = qla1280_queuecommand, .eh_abort_handler = qla1280_eh_abort, .eh_device_reset_handler= qla1280_eh_device_reset, .eh_bus_reset_handler = qla1280_eh_bus_reset, .eh_host_reset_handler = qla1280_eh_adapter_reset, .bios_param = qla1280_biosparam, .can_queue = 0xfffff, .this_id = -1, .sg_tablesize = SG_ALL, .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, }; #else static Scsi_Host_Template qla1280_driver_template = { .proc_name = "qla1280", .name = "Qlogic ISP 1280/12160", .detect = qla1280_detect, .release = qla1280_release, .info = qla1280_info, .queuecommand = qla1280_queuecommand, .eh_abort_handler = qla1280_eh_abort, .eh_device_reset_handler= qla1280_eh_device_reset, .eh_bus_reset_handler = qla1280_eh_bus_reset, .eh_host_reset_handler = qla1280_eh_adapter_reset, .bios_param = qla1280_biosparam_old, .can_queue = 0xfffff, .this_id = -1, .sg_tablesize = SG_ALL, .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, .use_new_eh_code = 1, }; #endif static int __devinit qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { int devnum = id->driver_data; struct qla_boards *bdp = &ql1280_board_tbl[devnum]; struct Scsi_Host *host; struct scsi_qla_host *ha; int error = -ENODEV; /* Bypass all AMI SUBSYS VENDOR IDs */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) { printk(KERN_INFO "qla1280: Skipping AMI SubSys Vendor ID Chip\n"); goto error; } printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n", bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn)); if (pci_enable_device(pdev)) { printk(KERN_WARNING "qla1280: Failed to enabled pci device, aborting.\n"); goto error; } pci_set_master(pdev); error = -ENOMEM; host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha)); if (!host) { printk(KERN_WARNING "qla1280: Failed to register host, aborting.\n"); goto error_disable_device; } ha = (struct scsi_qla_host *)host->hostdata; memset(ha, 0, sizeof(struct scsi_qla_host)); ha->pdev = pdev; ha->devnum = devnum; /* specifies microcode load address */ #ifdef QLA_64BIT_PTR if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) { if (pci_set_dma_mask(ha->pdev, 0xffffffff)) { printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; goto error_free_irq; } } else dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n", ha->host_no); #else if (pci_set_dma_mask(ha->pdev, 0xffffffff)) { printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; goto error_free_irq; } #endif ha->request_ring = pci_alloc_consistent(ha->pdev, ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)), &ha->request_dma); if (!ha->request_ring) { printk(KERN_INFO "qla1280: Failed to get request memory\n"); goto error_put_host; } ha->response_ring = pci_alloc_consistent(ha->pdev, ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)), &ha->response_dma); if (!ha->response_ring) { printk(KERN_INFO "qla1280: Failed to get response memory\n"); goto error_free_request_ring; } ha->ports = bdp->numPorts; ha->host = host; ha->host_no = host->host_no; host->irq = pdev->irq; host->max_channel = bdp->numPorts - 1; host->max_lun = MAX_LUNS - 1; host->max_id = MAX_TARGETS; host->max_sectors = 1024; host->unique_id = host->host_no; #if LINUX_VERSION_CODE < 0x020545 host->select_queue_depths = qla1280_select_queue_depth; #endif error = -ENODEV; #if MEMORY_MAPPED_IO ha->mmpbase = ioremap(pci_resource_start(ha->pdev, 1), pci_resource_len(ha->pdev, 1)); if (!ha->mmpbase) { printk(KERN_INFO "qla1280: Unable to map I/O memory\n"); goto error_free_response_ring; } host->base = (unsigned long)ha->mmpbase; ha->iobase = (struct device_reg __iomem *)ha->mmpbase; #else host->io_port = pci_resource_start(ha->pdev, 0); if (!request_region(host->io_port, 0xff, "qla1280")) { printk(KERN_INFO "qla1280: Failed to reserve i/o region " "0x%04lx-0x%04lx - already in use\n", host->io_port, host->io_port + 0xff); goto error_free_response_ring; } ha->iobase = (struct device_reg *)host->io_port; #endif INIT_LIST_HEAD(&ha->done_q); /* Disable ISP interrupts. */ qla1280_disable_intrs(ha); if (request_irq(pdev->irq, qla1280_intr_handler, SA_SHIRQ, "qla1280", ha)) { printk("qla1280 : Failed to reserve interrupt %d already " "in use\n", pdev->irq); goto error_release_region; } /* load the F/W, read paramaters, and init the H/W */ if (qla1280_initialize_adapter(ha)) { printk(KERN_INFO "qla1x160: Failed to initialize adapter\n"); goto error_free_irq; } /* set our host ID (need to do something about our two IDs) */ host->this_id = ha->bus_settings[0].id; pci_set_drvdata(pdev, host); #if LINUX_VERSION_CODE >= 0x020600 error = scsi_add_host(host, &pdev->dev); if (error) goto error_disable_adapter; scsi_scan_host(host); #else scsi_set_pci_device(host, pdev); #endif return 0; #if LINUX_VERSION_CODE >= 0x020600 error_disable_adapter: qla1280_disable_intrs(ha); #endif error_free_irq: free_irq(pdev->irq, ha); error_release_region: #if MEMORY_MAPPED_IO iounmap(ha->mmpbase); #else release_region(host->io_port, 0xff); #endif error_free_response_ring: pci_free_consistent(ha->pdev, ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)), ha->response_ring, ha->response_dma); error_free_request_ring: pci_free_consistent(ha->pdev, ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)), ha->request_ring, ha->request_dma); error_put_host: scsi_host_put(host); error_disable_device: pci_disable_device(pdev); error: return error; } static void __devexit qla1280_remove_one(struct pci_dev *pdev) { struct Scsi_Host *host = pci_get_drvdata(pdev); struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata; #if LINUX_VERSION_CODE >= 0x020600 scsi_remove_host(host); #endif qla1280_disable_intrs(ha); free_irq(pdev->irq, ha); #if MEMORY_MAPPED_IO iounmap(ha->mmpbase); #else release_region(host->io_port, 0xff); #endif pci_free_consistent(ha->pdev, ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))), ha->request_ring, ha->request_dma); pci_free_consistent(ha->pdev, ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))), ha->response_ring, ha->response_dma); pci_disable_device(pdev); scsi_host_put(host); } #if LINUX_VERSION_CODE >= 0x020600 static struct pci_driver qla1280_pci_driver = { .name = "qla1280", .id_table = qla1280_pci_tbl, .probe = qla1280_probe_one, .remove = __devexit_p(qla1280_remove_one), }; static int __init qla1280_init(void) { if (sizeof(struct srb) > sizeof(struct scsi_pointer)) { printk(KERN_WARNING "qla1280: struct srb too big, aborting\n"); return -EINVAL; } #ifdef MODULE /* * If we are called as a module, the qla1280 pointer may not be null * and it would point to our bootup string, just like on the lilo * command line. IF not NULL, then process this config string with * qla1280_setup * * Boot time Options * To add options at boot time add a line to your lilo.conf file like: * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}" * which will result in the first four devices on the first two * controllers being set to a tagged queue depth of 32. */ if (qla1280) qla1280_setup(qla1280); #endif return pci_module_init(&qla1280_pci_driver); } static void __exit qla1280_exit(void) { pci_unregister_driver(&qla1280_pci_driver); } module_init(qla1280_init); module_exit(qla1280_exit); #else # define driver_template qla1280_driver_template # include "scsi_module.c" #endif MODULE_AUTHOR("Qlogic & Jes Sorensen"); MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(QLA1280_VERSION); /* * Overrides for Emacs so that we almost follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically * adjust the settings for this buffer only. This must remain at the end * of the file. * --------------------------------------------------------------------------- * Local variables: * c-basic-offset: 8 * tab-width: 8 * End: */