for_each_child_of_node can help to iterate through the device_node,
and we don't need to use while loop. No functional change with this
conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://patch.msgid.link/20240816021826.65190-1-zhangzekun11@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables the TI TAS2781 amplifier SoC for the ASUS ROG ALLY X.
This is a design change from the original ASUS ROG ALLY, creating the need
for this patch. All other Realtek Codec settings seem to be re-used from
the original ROG ALLY design (on the ROG ALLY X). This patch maintains the
previous settings for the Realtek codec portion, but enables the I2C
binding for the TI TAS2781 amplifier (instead of the Cirrus CS35L41 amp
used on the original ASUS ROG ALLY).
One other requirement must be met for audio to work on the ASUS ROG ALLY X.
A proper firmware file in the correct location with a proper symlink. We
had reached out to TI engineers and confirmed that the firmware found in
the Windows' driver package has a GPL license. Bazzite Github is hosting
this firmware file for now until proper linux-firmware upstreaming can
occur. https://github.com/ublue-os/bazzite
This firmware file should be placed in
/usr/lib/firmware/ti/tas2781/TAS2XXX1EB3.bin with a symlink to it from
/usr/lib/firmware/TAS2XXX1EB3.bin
Co-developed by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Co-developed by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Jan Drogehoff <sentrycraft123@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Richard Alvarez <alvarez.richard@gmail.com>
Tested-by: Miles Montierth <cyber_dopamine@intheblackmedia.com>
Signed-off-by: Jonathan LoBue <jlobue10@gmail.com>
Link: https://patch.msgid.link/20240812045325.47736-1-jlobue10@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of these laptop models have quirk IDs that are identical but have
different amplifier parts fitted, this difference is described in the
ACPI information.
The solution introduced for this product family can derive the required
component binding information from ACPI instead of hardcoding it,
supports the new variants of the CS35L56 being used and has generalized
naming that makes it applicable to other ALC+amp combinations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802152215.20831-4-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563 ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent addition of a sanity check for a too low start tick time
seems breaking some applications that uses aloop with a certain slave
timer setup. They may have the initial resolution 0, hence it's
treated as if it were a too low value.
Relax and skip the check for the slave timer instance for addressing
the regression.
Fixes: 4a63bd179f ("ALSA: timer: Set lower bound of start tick time")
Cc: <stable@vger.kernel.org>
Link: https://github.com/raspberrypi/linux/issues/6294
Link: https://patch.msgid.link/20240810084833.10939-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds an xrun counter to snd_pcm_substream as an alternative
to using logs from XRUN_DEBUG_BASIC. The counter provides a way to track
the number of xrun occurences, accessible through the /proc interface.
The counter is enabled when CONFIG_SND_PCM_XRUN_DEBUG is set.
Example output:
$ cat /proc/asound/card0/pcm9p/sub0/status
owner_pid : 1425
trigger_time: 235.248957291
tstamp : 0.000000000
delay : 1912
avail : 480
avail_max : 1920
-----
hw_ptr : 672000
appl_ptr : 673440
xrun_counter: 3 # (new row)
Signed-off-by: Norman Bintang <normanbt@chromium.org>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: Chih-Yang Hsia <paulhsia@chromium.org>
Reviewed-by: David Riley <davidriley@chromium.org>
Link: https://patch.msgid.link/20240809140648.3414349-1-normanbt@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing input gain and master output mixer controls for
RME Babyface Pro.
This patch implements:
1. Input gain controls for 2 mic and 2 line inputs
2. Master output volume controls for all 12 output channels
These additions allow for more complete control of the Babyface Pro under
Linux.
Signed-off-by: Stefan Stistrup <sstistrup@gmail.com>
Link: https://patch.msgid.link/20240809204922.20112-1-sstistrup@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent cleanup in ALSA control core made no difference between
snd_ctl_find_id_mixer() and snd_ctl_find_id_mixer_locked(), and the
latter is to be dropped. The only user of the left API was ASoC, and
that's snd_soc_card_get_kcontrol_locked() and
snd_soc_component_get_kcontrol_locked().
This patch drops those functions and rewrites those users to call the
variant without locked instead. The test of the API became
superfluous, hence dropped as well.
As all callers of snd_ctl_find_id_mixer_locked() are gone,
snd_ctl_find_id_mixer_locked() is finally dropped, too.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-4-tiwai@suse.de
For a fast look-up of a control element via either numid or name
matching (enabled via CONFIG_SND_CTL_FAST_LOOKUP), a locking isn't
needed at all thanks to Xarray. OTOH, the locking is still needed for
a slow linked-list traversal, and that's rather a rare case.
In this patch, we reduce the use of locking at snd_ctl_find_*() API
functions, and switch from controls_rwsem to controls_rwlock for
avoiding unnecessary lock inversions. This also resulted in a nice
cleanup, as *_unlocked() version of snd_ctl_find_*() APIs can be
dropped.
snd_ctl_find_id_mixer_unlocked() is still left just as an alias of
snd_ctl_find_id_mixer(), since soc-card.c has a wrapper and there are
several users. Once after converting there, we can remove it later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-3-tiwai@suse.de
We'll re-use the existing rwlock for the protection of control list
lookup, too, and now rename it to a more generic name.
This is a preliminary change, only the rename of the struct field
here, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-2-tiwai@suse.de
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAma1PWoACgkQJNaLcl1U
h9BWNgf+PMiOLGbC57S4FRI0Ve05jGbfX5HTFAsgCy0D1TnjJTt8XM8fAqkDux1f
fvcjRVpaIrBIu9XY2vtC35C6XcHBcB7WsgiIF+pFCe9vwZy1avB+lA0vCogyM1Fv
ToK/ssVWUnjKl2ClJ2faBhyYivleXZoTCSSXYOu3NL6owC8jWXPe9zMlfBGGkqUV
bIz6hQCJPhAm7j0H07zvT/ItwoWsvPRiHPkHbzHp7tb8rH09m4JWAseufQ+HSIRj
QzQ4u/S0HEt/e2fV+TFqfBgZzHIaKhx8uUnIhvCTGhz+42a+niyiV9du987IaLqW
QmL5YDASem7UnlTil+mpaQBy5k/NIQ==
=P4XX
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
Device tuning files made with early revision tooling may contain
configuration that can unmask IRQ signals that are owned by the host.
Adding a safe default to the regmap patch ensures that the hardware
matches the driver expectations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807142648.46932-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PREEMPT_RT enabled a spinlock_t becomes a sleeping lock.
This is usually not a problem with spinlocks used in IRQ context since
IRQ handlers get threaded. However, if IRQF_ONESHOT is set, the primary
handler won't be force-threaded and runs always in hardirq context. This is
a problem because spinlock_t requires a preemptible context on PREEMPT_RT.
In this particular instance, regmap mmio uses spinlock_t to protect the
register access and IRQF_ONESHOT is set on the IRQ. In this case, it is
actually better to do everything in threaded handler and it solves the
problem with PREEMPT_RT.
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/linux-amlogic/20240729131652.3012327-1-avkrasnov@salutedevices.com
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: b11d26660d ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240807162705.4024136-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We find that we need to set snd_jack_types to 0. If not,
there will be a probability of button detection errors
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240807025356.24904-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo Thinkpad E14 Gen 6 (model type 21M3)
needs a quirk entry for internal mic to work.
Signed-off-by: Krzysztof Stępniak <kfs.szk@gmail.com>
Link: https://patch.msgid.link/20240807001219.1147-1-kfs.szk@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_pcm_rate_to_rate_bit() helper provided by Alsa instead
re-implementing it. This reduce code duplication and helps when
changing some Alsa definition is necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240808134857.86749-1-jbrunet@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the previous change for swapping the power_ref and controls_rwsem
lock order, the code path for the compat layer was forgotten.
This patch covers the remaining code.
Fixes: fcc62b1910 ("ALSA: control: Take power_ref lock primarily")
Link: https://patch.msgid.link/20240808163128.20383-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of usb_set_interface() and a delay are superfluous when the
device has been already disconnected. Add a disconnection check
before doing it.
Link: https://patch.msgid.link/20240808091522.31415-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value. If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.
Add a counter and break if the loop is unexpectedly too long.
Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the code refactoring of USB-audio quirk handling, I assumed that
the quirk entries of Stanton ScratchAmp devices were only about the
device name, and moved them completely into the rename table.
But it seems that the device requires the quirk entry so that it's
probed by the driver itself.
This re-adds back the quirk entries of ScratchAmp, but in a
minimalistic manner.
Fixes: 5436f59bc5 ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that all users of snd_print*() are gone, let's drop the functions
completely. This also makes CONFIG_SND_VERBOSE_PRINTK redundant, and
it's dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-55-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The debug prints with a special macro snd_printddd() are replaced with
the conditional pr_debug(). Unfortunately dev_dbg() can't be applied
well due to the lack of the reference to the device pointer.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-53-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-52-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-51-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-50-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-49-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-48-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some superfluous debug prints are dropped, and some ambiguous messages
are slightly rephrased. The sk.dev pointer is set properly for
allowing to call dev_*() functions, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-45-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive snd_card object for calling
dev_*() functions, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-44-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-43-tiwai@suse.de
Replace an open-coded printk warning with dev_warn() for code
simplicity and consistency.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-42-tiwai@suse.de
