Commit Graph

7059 Commits

Author SHA1 Message Date
David S. Miller
5510b3c2a1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/s390/net/bpf_jit_comp.c
	drivers/net/ethernet/ti/netcp_ethss.c
	net/bridge/br_multicast.c
	net/ipv4/ip_fragment.c

All four conflicts were cases of simple overlapping
changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 23:52:20 -07:00
Daniel Borkmann
a6ed38361b bpf_jit_disasm: also support reading jit dump from file
This patch adds support to read the dmesg BPF JIT dump also from a
file instead of the klog buffer. I found this quite useful when going
through some 'before/after patch' logs. It also fixes a regex leak
found by valgrind when no image dump was found.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 15:13:14 -07:00
Linus Torvalds
30b4f0faf4 linux-kselftest-4.2-rc5
Kselftest fixes for 4.2-rc5
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVtkSOAAoJEAsCRMQNDUMcA94QAOGBcxobPi6ufSmq6jpyfEv/
 7a9ZS9Gg0VyrcfydP2gdUhbrx5EzGVTAI2Ex0FMrYSyQnc0SEgAJiFvL79OFtu2x
 2aozEg1OFsba3YwXgj5Gzb305UlCmCZ7r4OhXFMpvnc/lFL3Q+gUqsUkrqO0nzI4
 ZXV3euYnSInkRgi56NhDGzGK3qzDBwGxbHIM5Fl0hWzKvGyQBaGNbRnS/YWs3KgX
 kg4tHZ0jGQxziL720brIm+q2WpZLTzoXIBoLTLIb8LCinomMt+h3Kmb4QbzkLxQ3
 s5c+GSVZ94ZsyLi6jmYzDPTUTeDWypNIe1YVCDMsAs00282okqSyNDGAnu9KiGUe
 mx/kBCqttKQrvtL3H5HgC9YzJGK9vrcKvQhOa18fJvdizgO4GJJxl83QnM4WlI2N
 mGwgoe/No5h+iFX7Mvh36CYyvOPRupMg7H1mX7gCdoKodCObppgTbbMrZFSxKvMH
 VytrdRU10XWKgO2imdBsSfvoFIZ1h3+9Y4rB5nJLkrQWHAkZTeLeXkqgv4gmrO5k
 nPfg00ipX0Pac7vYamLkKWwmbIUK7ryBbJVhAmF5g6u7E8MIgcwPR9pdLXmVL70i
 dLL4Cib13QHGtXe0J7M5fmecNVGHrDdvXBBphZuql7jYdaP8+sx2mUSNB/IC697i
 n8l9aNrHu+sHbs2yjX8s
 =Hkw2
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan.

* tag 'linux-kselftest-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/futex: Fix futex_cmp_requeue_pi() error handling
2015-07-28 10:09:53 -07:00
Darren Hart
fee50f3c84 selftests/futex: Fix futex_cmp_requeue_pi() error handling
An earlier (pre-kernel-integration) refactoring of this code mistakenly
replaced the error condition, <, with a >. Use < to detect an error as
opposed to a successful requeue or signal race.

Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-07-20 18:29:38 -06:00
Linus Torvalds
f79a17bf26 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Really allow to specify custom CC, AR or LD
  perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
  perf hists browser: Take the --comm, --dsos, etc filters into account
  perf symbols: Store if there is a filter in place
  x86, perf: Fix static_key bug in load_mm_cr4()
  tools: Copy lib/hweight.c from the kernel sources
  perf tools: Fix the detached tarball wrt rbtree copy
  perf thread_map: Fix the sizeof() calculation for map entries
  tools lib: Improve clean target
  perf stat: Fix shadow declaration of close
  perf tools: Fix lockup using 32-bit compat vdso
2015-07-18 10:44:21 -07:00
Alexey Brodkin
3c71ba3f80 perf tools: Really allow to specify custom CC, AR or LD
Commit 5ef7bbb09f ("perf tools: Allow to specify custom linker
command") was meant to enable usage non $(CROSS_COMPILE)ld linker during
perf building.

But implementation didn't take into account the fact that LD is a
pre-defined variable in GNU Make. I.e. it is always defined.

Which means there's no point to check "LD ?= ..." because it will never
succeed.

And so LD will be either that explicitly passed to make like this:

 ------->8-------
 make LD=path_to_my_ld ...
 ------->8-------
 or default value, which is host's "ld".

Latter leads to failure of cross-linkage because instead of cross linker
"$(CROSS_COMPILE)ld" host's "ld" is used.

Fortunately there's a way to do correct substitution of $(CROSS_COMPILE)ld
with user defined LD on command-line.

As a reference was used implementation in "tools/lib/traceevent/Makefile".

Build tested for x86_64 and ARC.

Thanks Jiri for this hint.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Fixes: 5ef7bbb09f ("perf tools: Allow to specify custom linker command")
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1436864720-26316-1-git-send-email-abrodkin@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-15 11:57:28 -03:00
Adrian Hunter
a7fde09a78 perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
Move the checking for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT for AUX area mmaps
until after checking if such mmaps are used anyway.

Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/55A5023C.7020907@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-15 11:57:28 -03:00
Arnaldo Carvalho de Melo
9c0fa8dd3d perf hists browser: Take the --comm, --dsos, etc filters into account
At some point:

  commit 2c86c7ca76
  Author: Namhyung Kim <namhyung@kernel.org>
  Date:   Mon Mar 17 18:18:54 2014 -0300

    perf report: Merge al->filtered with hist_entry->filtered

We stopped dropping samples for things filtered via the --comms, --dsos,
--symbols, etc, i.e. things marked as filtered in the symbol resolution
routines (thread__find_addr_map(), perf_event__preprocess_sample(),
etc).

But then, in:

  commit 268397cb2a
  Author: Namhyung Kim <namhyung@kernel.org>
  Date:   Tue Apr 22 14:49:31 2014 +0900

    perf top/tui: Update nr_entries properly after a filter is applied

We don't take into account entries that were filtered in
perf_event__preprocess_sample() and friends, which leads to
inconsistency in the browser seek routines, that expects the number of
hist_entry->filtered entries to match what it thinks is the number of
unfiltered, browsable entries.

So, for instance, when we do:

  perf top --symbols ___non_existent_symbol___

the hist_browser__nr_entries() routine thinks there are no filters in
place, uses the hists->nr_entries but all entries are filtered, leading
to a segfault.

Tested with:

   perf top --symbols malloc,free --percentage=relative

Freezing, by pressing 'f', at any time and doing the math on the
percentages ends up with 100%, ditto for:

   perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative

Both were segfaulting, all fixed now.

More work needed to do away with checking if filters are in place, we
should just use the nr_non_filtered_samples counter, no need to
conditionally use it or hists.nr_filter, as what the browser does is
just show unfiltered stuff. An audit of how it is being accounted is
needed, this is the minimal fix.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 268397cb2a ("perf top/tui: Update nr_entries properly after a filter is applied")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-13 16:06:09 -03:00
Arnaldo Carvalho de Melo
0bc2f2f7d0 perf symbols: Store if there is a filter in place
When setting yup the symbols library we setup several filter lists,
for dsos, comms, symbols, etc, and there is code that, if there are
filters, do certain operations, like recalculate the number of non
filtered histogram entries in the top/report TUI.

But they were considering just the "Zoom" filters, when they need to
take into account as well the above mentioned filters (perf top --comms,
--dsos, etc).

So store in symbol_conf.has_filter true if any of those filters is in
place.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f5edfmhq69vfvs1kmikq1wep@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-13 08:21:57 -03:00
Linus Torvalds
59c3cb553f Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm
Pull libnvdimm fixes from Dan Williams:
 "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor
     bug fixes (patches 1-6)

  2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10).

     Granted these are slightly large for a -rc update.  They have been
     out for review in one form or another since the end of May and were
     deferred from the merge window while we settled on the "PMEM API"
     for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem,
     and wmb_pmem).

     Now that those apis are merged we implement them in the BLK driver
     to guarantee that mmio aperture moves stay ordered with respect to
     incoming read/write requests, and that writes are flushed through
     those mmio-windows and platform-buffers to be persistent on media.

  These pass the sub-system unit tests with the updates to
  tools/testing/nvdimm, and have received a successful build-report from
  the kbuild robot (468 configs).

  With acks from Rafael for the touches to drivers/acpi/"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm:
  nfit: add support for NVDIMM "latch" flag
  nfit: update block I/O path to use PMEM API
  tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test
  tools/testing/nvdimm: fix return code for unimplemented commands
  tools/testing/nvdimm: mock ioremap_wt
  pmem: add maintainer for include/linux/pmem.h
  nfit: fix smatch "use after null check" report
  nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails
  libnvdimm: smatch cleanups in __nd_ioctl
  sparse: fix misplaced __pmem definition
2015-07-11 20:44:31 -07:00
Dan Williams
9d27a87ec9 tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test
In preparation for fixing the BLK path to properly use "directed
pcommit" enable the unit test infrastructure to emit mock "flush"
tables.  Writes to these flush addresses trigger a memory controller to
flush its internal buffers to persistent media, similar to the x86
"pcommit" instruction.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10 14:07:03 -04:00
Dan Williams
f7ec83684a tools/testing/nvdimm: fix return code for unimplemented commands
The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY
return code to indicate that the flags are unimplimented and to fall
back to a safe default.  As is the -ENXIO error code erroneoously
indicates to fail enabling a BLK region.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10 13:50:50 -04:00
Dan Williams
b1b2e6235a tools/testing/nvdimm: mock ioremap_wt
In the 4.2-rc1 merge the default_memremap_pmem() implementation switched
from ioremap_nocache() to ioremap_wt().  Add it to the list of mocked
routines to restore the ability to run the unit tests.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10 13:50:50 -04:00
Arnaldo Carvalho de Melo
0aefc3590a tools: Copy lib/hweight.c from the kernel sources
Instead of accessing it directly, as it uses EXPORT_SYMBOL, that has
no meaning in tools/perf and because we removed the stubs for it, i.e.
we removed the tools/include/linux/export.h file.

This fixes the build for the detached tarball sources cases and removes
one more source of entanglement with the kernel sources.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oyqx541o7apa2cskjhcxi6nx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-09 16:29:56 -03:00
Arnaldo Carvalho de Melo
f3efe3a07e perf tools: Fix the detached tarball wrt rbtree copy
The python binding build process was still looking at the kernel
rbtree.c file, so, when doing a in-tree build it would work, but when
creating a tarball using tools/perf/MANIFEST as the contents list and
then trying to build the resulting detached sources, it failed.

Fix it by removing one level of indirection from rbtree.c in the
tools/perf/util/python-ext-sources file.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8u83c2k5guyhxdlkaaqis8k4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-09 16:23:57 -03:00
Arnaldo Carvalho de Melo
08ae217b8d perf thread_map: Fix the sizeof() calculation for map entries
When we started adding extra stuff per array entry, growing the size of
those entries to more than sizeof(pid_t), we had to convert those sizeof
operations to the more robust sizeof(map->map[0]) idiom, that is future
proof, i.e. if/when we add more stuff to those entries, that expression
will produce the new per-entry size.

And besides that, we need to zero out those extra fields, that sometimes
may not get filled, like when we couldn't care less about the comms,
since we don't need those, but since we will try freeing it at
thread_map__delete(), we better fix it.

That is why a thread_map__realloc() was provided.

But that method wasn't used in thread_map__new_by_uid(), fix it.

Reported-by: Ingo Molnar <mingo@kernel.org>
Fixes: 792402fd5c ("perf thrad_map: Add comm string into array")
Fixes: 9d7e8c3a96 ("perf tools: Add thread_map__(alloc|realloc) helpers")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6a0swlm6m8lnu3wpjv284hkb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-09 12:28:53 -03:00
Riku Voipio
c867b150de tools lib: Improve clean target
The clean targets miss some .cmd and .d files.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/1434631938-12681-1-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-08 17:56:13 -03:00
Jiri Olsa
5fc472a628 perf stat: Fix shadow declaration of close
Vinson reported shadow declaration of close introduced
by the following commit:

  106a94a0f8 perf stat: Introduce read_counters function

Using close_counters name instead.

Reported-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 106a94a0f8 ("perf stat: Introduce read_counters function")
Link: http://lkml.kernel.org/r/20150708111731.GA3512@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-08 10:04:58 -03:00
Adrian Hunter
6d545a632f perf tools: Fix lockup using 32-bit compat vdso
The __machine__findnew_compat() function is called only from
__machine__findnew_vdso_compat() which is called only from
machine__findnew_vdso() which already holds machine->dsos.lock, so
remove locking from __machine__findnew_compat().

This manifests itself tracing 32-bit programs with a 64-bit perf.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436267618-20521-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-07 11:05:08 -03:00
Ingo Molnar
d2d61ed55f Merge branch 'perf/rbtree_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull rbtree build fix from Arnaldo Carvalho de Melo.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06 09:24:41 +02:00
Arnaldo Carvalho de Melo
307bc97195 tools: Copy rbtree_augmented.h from the kernel
To complete the transitioning to not to share the same files with the
kernel, also moving it from tools/perf/include/linux/ to
tools/include/linux to make the whoke rbtree kit to other tools/ living
codebases.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5bxyehixafckqm6ez25alnfo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-05 22:59:05 -03:00
Arnaldo Carvalho de Melo
03da23a34a tools: Move rbtree.h from tools/perf/
The previous step, copying the contents minus the rcupdate.h parts, was
done as a minimal fix, now do the move from tools/perf/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-52fllxtsgmtke66pmv98mcma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-05 22:54:01 -03:00
Arnaldo Carvalho de Melo
3f735377bf tools: Copy lib/rbtree.c to tools/lib/
So that we can remove kernel specific stuff we've been stubbing out via
a tools/include/linux/export.h that gets removed in this patch and to
avoid breakages in the future like the one fixed recently where
rcupdate.h started being used in rbtree.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rxuzfsozpb8hv1emwpx06rm6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-05 22:48:21 -03:00
Arnaldo Carvalho de Melo
4407f96744 perf tools: Copy rbtree.h from the kernel
We were using the include/linux/rbtree.h directly from the kernel,
which broke the build as soon as it started using rcupdate.h, to
avoid dragging the rcu header files into tools/, for which there is
no use so far, grab a copy of rbtree.h.

This is the minimal fix, later patches will copy as well lib/rbtree.c
and move rbtree.h into tools/include/, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dfmuj0j63w4by7vhlh4hhn74@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-05 15:05:08 -03:00
Arnaldo Carvalho de Melo
728abda6a6 tools: Adopt {READ,WRITE_ONCE} from the kernel
We need it to build rbtree.c after this cset:

  commit d72da4a4d9
  Author: Peter Zijlstra <peterz@infradead.org>
  Date:   Wed May 27 11:09:36 2015 +0930

    rbtree: Make lockless searches non-fatal

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qlnzhezv5ddwst0w9fydju0y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-05 15:05:00 -03:00
Linus Torvalds
c1776a18e3 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "This tree includes an x86 PMU scheduling fix, but most changes are
  late breaking tooling fixes and updates:

  User visible fixes:

   - Create config.detected into OUTPUT directory, fixing parallel
     builds sharing the same source directory (Aaro Kiskinen)

   - Allow to specify custom linker command, fixing some MIPS64 builds.
     (Aaro Kiskinen)

   - Fix to show proper convergence stats in 'perf bench numa' (Srikar
     Dronamraju)

  User visible changes:

   - Validate syscall list passed via -e argument to 'perf trace'.
     (Arnaldo Carvalho de Melo)

   - Introduce 'perf stat --per-thread' (Jiri Olsa)

   - Check access permission for --kallsyms and --vmlinux (Li Zhang)

   - Move toggling event logic from 'perf top' and into hists browser,
     allowing freeze/unfreeze with event lists with more than one entry
     (Namhyung Kim)

   - Add missing newlines when dumping PERF_RECORD_FINISHED_ROUND and
     showing the Aggregated stats in 'perf report -D' (Adrian Hunter)

  Infrastructure fixes:

   - Add missing break for PERF_RECORD_ITRACE_START, which caused those
     events samples to be parsed as well as PERF_RECORD_LOST_SAMPLES.
     ITRACE_START only appears when Intel PT or BTS are present, so..
     (Jiri Olsa)

   - Call the perf_session destructor when bailing out in the inject,
     kmem, report, kvm and mem tools (Taeung Song)

  Infrastructure changes:

   - Move stuff out of 'perf stat' and into the lib for further use
     (Jiri Olsa)

   - Reference count the cpu_map and thread_map classes (Jiri Olsa)

   - Set evsel->{cpus,threads} from the evlist, if not set, allowing the
     generalization of some 'perf stat' functions that previously were
     accessing private static evlist variable (Jiri Olsa)

   - Delete an unnecessary check before the calling free_event_desc()
     (Markus Elfring)

   - Allow auxtrace data alignment (Adrian Hunter)

   - Allow events with dot (Andi Kleen)

   - Fix failure to 'perf probe' events on arm (He Kuang)

   - Add testing for Makefile.perf (Jiri Olsa)

   - Add test for make install with prefix (Jiri Olsa)

   - Fix single target build dependency check (Jiri Olsa)

   - Access thread_map entries via accessors, prep patch to hold more
     info per entry, for ongoing 'perf stat --per-thread' work (Jiri
     Olsa)

   - Use __weak definition from compiler.h (Sukadev Bhattiprolu)

   - Split perf_pmu__new_alias() (Sukadev Bhattiprolu)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  perf tools: Allow to specify custom linker command
  perf tools: Create config.detected into OUTPUT directory
  perf mem: Fill in the missing session freeing after an error occurs
  perf kvm: Fill in the missing session freeing after an error occurs
  perf report: Fill in the missing session freeing after an error occurs
  perf kmem: Fill in the missing session freeing after an error occurs
  perf inject: Fill in the missing session freeing after an error occurs
  perf tools: Add missing break for PERF_RECORD_ITRACE_START
  perf/x86: Fix 'active_events' imbalance
  perf symbols: Check access permission when reading symbol files
  perf stat: Introduce --per-thread option
  perf stat: Introduce print_counters function
  perf stat: Using init_stats instead of memset
  perf stat: Rename print_interval to process_interval
  perf stat: Remove perf_evsel__read_cb function
  perf stat: Move perf_stat initialization counter process code
  perf stat: Move zero_per_pkg into counter process code
  perf stat: Separate counters reading and processing
  perf stat: Introduce read_counters function
  perf stat: Introduce perf_evsel__read function
  ...
2015-07-04 08:17:29 -07:00
Linus Torvalds
9bdc771f2c Additional ACPICA material for v4.2-rc1
- Fix system resume problems related to 32-bit and 64-bit versions
    of the Firmware ACPI Control Structure (FACS) in the firmare (Lv
    Zheng).
 
  - Fix double initialization of the FACS (Lv Zheng).
 
  - Add _CLS object processing code to ACPICA (Suravee Suthikulpanit).
 
  - Add support for the (currently missing) new GIC version field in
    the Multiple APIC Description Table (MADT) (Hanjun Guo).
 
  - Add support for overriding objects in the ACPI namespace to
    ACPICA and OSDT support (Lv Zheng, Bob Moore, Zhang Rui).
 
  - Updates related to the TCPA and TPM2 ACPI tables (Bob Moore).
 
  - Restore the commit modifying _REV to always return "2" (as
    required by ACPI 6) and add a blacklisting mechanism for
    systems that may be affected by that change (Rafael J Wysocki).
 
  - Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVlcwtAAoJEILEb/54YlRx/IwQAKMZaZZni2HhJ/ASBVAtF4zp
 RNaS+XiTzLg2HIIR0QjRE9LT2CH3Zw2l99XzU91SqS2UfvTr+YJjnSNq3PllAgrT
 SsFv5fVJZr7VfJw7gbARhOXp926INfDRqKp5WvpQ3XCFclCQRNbqzn0PD1ouooVQ
 x4IhhFlxyCIOHwbINS//CsJ8H+PT7aUc2kSgEKGbVWFfKE9jfTCx1Nekh2GoEqf+
 wutzaMmCoQsf0kVNldgEnF2vxIxwgcXkhYxBBdnGBl2afJz+THsPaJP6Bx6JNA+S
 iaFh+iyo70jeJ4ouBxJc0E46g+pDOJdP71VQhexFu3c7OU+wmhyv30/f4SwxXLOD
 +H8OhOMXFLff9PS+BVU4iR7t5SikZzbXc/AjuM6es1UT+k8zOlo+fRL1I8dXDF6V
 t4GiT6hz/MX30cP3aumXtQ2dl9TksWPtfoerSjo1EowY6wPZ+WpJ2bmp5uecIDGV
 TNdC4pKjDVgbFP889mZF4pG198uR4UV1gRCf4gvwEyiNMFd3xRbFhs4r7AkiSQLn
 fy+V7MlgFiFaB6Ej/AU01fjarOPPSiv8uFWAZL4e9R/88UgfVVq0aFonw/r5l4jj
 3rJBOH7YxNxGBhRjTL+d7cwruED6G/K2S0QbD2kZBOSHrouz1fuLFdvgKj8ahqyJ
 VfQZs9A3PSv/v1wssUr/
 =MlWS
 -----END PGP SIGNATURE-----

Merge tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPICA updates from Rafael Wysocki:
 "Additional ACPICA material for v4.2-rc1

  This will update the ACPICA code in the kernel to upstream revision
  20150619 (a bug-fix release mostly including stable-candidate fixes)
  and restore an earlier ACPICA commit that had to be reverted due to a
  regression introduced by it (the regression is addressed by
  blacklisting the only known system affected by it to date).

  The only new feature added by this update is the support for
  overriding objects in the ACPI namespace and a new ACPI table that can
  be used for that called the Override System Definition Table (OSDT).
  That should allow us to "patch" the ACPI namespace built from
  incomplete or incorrect ACPI System Definition tables (DSDT, SSDT)
  during system startup without the need to provide replacements for all
  of those tables in the future.

  Specifics:

   - Fix system resume problems related to 32-bit and 64-bit versions of
     the Firmware ACPI Control Structure (FACS) in the firmare (Lv
     Zheng)

   - Fix double initialization of the FACS (Lv Zheng)

   - Add _CLS object processing code to ACPICA (Suravee Suthikulpanit)

   - Add support for the (currently missing) new GIC version field in
     the Multiple APIC Description Table (MADT) (Hanjun Guo)

   - Add support for overriding objects in the ACPI namespace to ACPICA
     and OSDT support (Lv Zheng, Bob Moore, Zhang Rui)

   - Updates related to the TCPA and TPM2 ACPI tables (Bob Moore)

   - Restore the commit modifying _REV to always return "2" (as required
     by ACPI 6) and add a blacklisting mechanism for systems that may be
     affected by that change (Rafael J Wysocki)

   - Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner)"

* tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
  Revert 'Revert "ACPICA: Permanently set _REV to the value '2'."'
  ACPI / init: Make it possible to override _REV
  ACPICA: Update version to 20150619
  ACPICA: Comment update, no functional change
  ACPICA: Update TPM2 ACPI table
  ACPICA: Update definitions for the TCPA and TPM2 ACPI tables
  ACPICA: Split C library prototypes to new header
  ACPICA: De-macroize calls to standard C library functions
  ACPI / acpidump: Update acpidump manual
  ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
  ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
  ACPICA: Cleanup output for the ASL Debug object
  ACPICA: Update for acpi_install_table memory types
  ACPICA: Namespace: Change namespace override to avoid node deletion
  ACPICA: Namespace: Add support of OSDT table
  ACPICA: Namespace: Add support to allow overriding objects
  ACPICA: ACPI 6.0: Add values for MADT GIC version field
  ACPICA: Utilities: Add _CLS processing
  ACPICA: Add dragon_fly support to unix file mapping file
  ACPICA: EFI: Add EFI interface definitions to eliminate dependency of GNU EFI
  ...
2015-07-02 17:11:28 -07:00
Bob Moore
4fa4616e27 ACPICA: De-macroize calls to standard C library functions
ACPICA commit 3b1026e0bdd3c32eb6d5d313f3ba0b1fee7597b4
ACPICA commit 00f0dc83f5cfca53b27a3213ae0d7719b88c2d6b
ACPICA commit 47d22a738d0e19fd241ffe4e3e9d4e198e4afc69

Across all of ACPICA. Replace C library macros such as ACPI_STRLEN with the
standard names such as strlen. The original purpose for these macros is
long since obsolete.
Also cast various invocations as necessary. Bob Moore, Jung-uk Kim, Lv Zheng.

Link: https://github.com/acpica/acpica/commit/3b1026e0
Link: https://github.com/acpica/acpica/commit/00f0dc83
Link: https://github.com/acpica/acpica/commit/47d22a73
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Lv Zheng
63c43812ee ACPI / acpidump: Update acpidump manual
This patch updates acpidump manual according to the recent changes.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Lv Zheng
4fb80c3769 ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
ACPICA commit 04c3bd7e9d6aeb2b3edebe99c90dc271ae4e6353

In order to work without any additional option to dump tables when /dev/mem
doesn't exist, this patch switches the default behavior of acpidump to dump
from /sys/firmware/acpi/tables. Reported by Al Stone, Fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/04c3bd7e
Reported-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Lv Zheng
428394dfdf ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
ACPICA commit ab29013cfa2424140446aff196a70b211ab343a9

The /dev/mem can be configured out, in which case, acpidump should still
work with "-c" option as tables can be found in /sys/firmware/acpi/tables.
This patch allows acpidump to work without /dev/mem.
This patch has been tested with "acpidump -c" and "acpidump -c -n FADT".
And it worked as expected. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/ab29013c
Reported-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:55 +02:00
Sascha Wildner
cbc823405a ACPICA: Add dragon_fly support to unix file mapping file
ACPICA commit 795b215d6fd062386f0a1c23dff9ffa244683c4f

ACPICA BZ 1130

This patch doesn't affect Linux kernel.

Link: https://bugs.acpica.org/show_bug.cgi?id=1130
Link: https://github.com/acpica/acpica/commit/795b215d
Signed-off-by: Sascha Wildner <swildner@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-01 23:17:53 +02:00
Aaro Koskinen
5ef7bbb09f perf tools: Allow to specify custom linker command
Allow to specify custom linker command. This fixes MIPS64 builds for
64-bit userspace as it will allow to pass a linker using the correct
linker flags for 64-bit ABI (by default GNU binutils ld will assume
N32).

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-2-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:50 -03:00
Aaro Koskinen
642273795f perf tools: Create config.detected into OUTPUT directory
Create config.detected into OUTPUT directory instead of source
directory.

This fixes parallel builds that share the same source directory.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-1-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Taeung Song
1df9fade87 perf mem: Fill in the missing session freeing after an error occurs
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435752499-11752-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Taeung Song
41b983609a perf kvm: Fill in the missing session freeing after an error occurs
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435677525-28055-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Taeung Song
07a716fff2 perf report: Fill in the missing session freeing after an error occurs
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435652124-22414-6-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Taeung Song
249ca1a860 perf kmem: Fill in the missing session freeing after an error occurs
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435652124-22414-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Taeung Song
9fedfb0c5b perf inject: Fill in the missing session freeing after an error occurs
When an error occur an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435652124-22414-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Jiri Olsa
ceb9291307 perf tools: Add missing break for PERF_RECORD_ITRACE_START
Missing switch break since introduction of new event:

  c4937a91ea perf tools: handle PERF_RECORD_LOST_SAMPLES

Also removing unneeded break for PERF_RECORD_LOST_SAMPLES.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150629112745.GA21507@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:48 -03:00
Linus Torvalds
88793e5c77 The libnvdimm sub-system introduces, in addition to the libnvdimm-core,
4 drivers / enabling modules:
 
 NFIT:
 Instantiates an "nvdimm bus" with the core and registers memory devices
 (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface
 table).  After registering NVDIMMs the NFIT driver then registers
 "region" devices.  A libnvdimm-region defines an access mode and the
 boundaries of persistent memory media.  A region may span multiple
 NVDIMMs that are interleaved by the hardware memory controller.  In
 turn, a libnvdimm-region can be carved into a "namespace" device and
 bound to the PMEM or BLK driver which will attach a Linux block device
 (disk) interface to the memory.
 
 PMEM:
 Initially merged in v4.1 this driver for contiguous spans of persistent
 memory address ranges is re-worked to drive PMEM-namespaces emitted by
 the libnvdimm-core.  In this update the PMEM driver, on x86, gains the
 ability to assert that writes to persistent memory have been flushed all
 the way through the caches and buffers in the platform to persistent
 media.  See memcpy_to_pmem() and wmb_pmem().
 
 BLK:
 This new driver enables access to persistent memory media through "Block
 Data Windows" as defined by the NFIT.  The primary difference of this
 driver to PMEM is that only a small window of persistent memory is
 mapped into system address space at any given point in time.  Per-NVDIMM
 windows are reprogrammed at run time, per-I/O, to access different
 portions of the media.  BLK-mode, by definition, does not support DAX.
 
 BTT:
 This is a library, optionally consumed by either PMEM or BLK, that
 converts a byte-accessible namespace into a disk with atomic sector
 update semantics (prevents sector tearing on crash or power loss).  The
 sinister aspect of sector tearing is that most applications do not know
 they have a atomic sector dependency.  At least today's disk's rarely
 ever tear sectors and if they do one almost certainly gets a CRC error
 on access.  NVDIMMs will always tear and always silently.  Until an
 application is audited to be robust in the presence of sector-tearing
 the usage of BTT is recommended.
 
 Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
 Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
 Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
 Wysocki, and Bob Moore.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVjZGBAAoJEB7SkWpmfYgC4fkP/j+k6HmSRNU/yRYPyo7CAWvj
 3P5P1i6R6nMZZbjQrQArAXaIyLlFk4sEQDYsciR6dmslhhFZAkR2eFwVO5rBOyx3
 QN0yxEpyjJbroRFUrV/BLaFK4cq2oyJAFFHs0u7/pLHBJ4MDMqfRKAMtlnBxEkTE
 LFcqXapSlvWitSbjMdIBWKFEvncaiJ2mdsFqT4aZqclBBTj00eWQvEG9WxleJLdv
 +tj7qR/vGcwOb12X5UrbQXgwtMYos7A6IzhHbqwQL8IrOcJ6YB8NopJUpLDd7ZVq
 KAzX6ZYMzNueN4uvv6aDfqDRLyVL7qoxM9XIjGF5R8SV9sF2LMspm1FBpfowo1GT
 h2QMr0ky1nHVT32yspBCpE9zW/mubRIDtXxEmZZ53DIc4N6Dy9jFaNVmhoWtTAqG
 b9pndFnjUzzieCjX5pCvo2M5U6N0AQwsnq76/CasiWyhSa9DNKOg8MVDRg0rbxb0
 UvK0v8JwOCIRcfO3qiKcx+02nKPtjCtHSPqGkFKPySRvAdb+3g6YR26CxTb3VmnF
 etowLiKU7HHalLvqGFOlDoQG6viWes9Zl+ZeANBOCVa6rL2O7ZnXJtYgXf1wDQee
 fzgKB78BcDjXH4jHobbp/WBANQGN/GF34lse8yHa7Ym+28uEihDvSD1wyNLnefmo
 7PJBbN5M5qP5tD0aO7SZ
 =VtWG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm

Pull libnvdimm subsystem from Dan Williams:
 "The libnvdimm sub-system introduces, in addition to the
  libnvdimm-core, 4 drivers / enabling modules:

  NFIT:
    Instantiates an "nvdimm bus" with the core and registers memory
    devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
    Interface table).

    After registering NVDIMMs the NFIT driver then registers "region"
    devices.  A libnvdimm-region defines an access mode and the
    boundaries of persistent memory media.  A region may span multiple
    NVDIMMs that are interleaved by the hardware memory controller.  In
    turn, a libnvdimm-region can be carved into a "namespace" device and
    bound to the PMEM or BLK driver which will attach a Linux block
    device (disk) interface to the memory.

  PMEM:
    Initially merged in v4.1 this driver for contiguous spans of
    persistent memory address ranges is re-worked to drive
    PMEM-namespaces emitted by the libnvdimm-core.

    In this update the PMEM driver, on x86, gains the ability to assert
    that writes to persistent memory have been flushed all the way
    through the caches and buffers in the platform to persistent media.
    See memcpy_to_pmem() and wmb_pmem().

  BLK:
    This new driver enables access to persistent memory media through
    "Block Data Windows" as defined by the NFIT.  The primary difference
    of this driver to PMEM is that only a small window of persistent
    memory is mapped into system address space at any given point in
    time.

    Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
    different portions of the media.  BLK-mode, by definition, does not
    support DAX.

  BTT:
    This is a library, optionally consumed by either PMEM or BLK, that
    converts a byte-accessible namespace into a disk with atomic sector
    update semantics (prevents sector tearing on crash or power loss).

    The sinister aspect of sector tearing is that most applications do
    not know they have a atomic sector dependency.  At least today's
    disk's rarely ever tear sectors and if they do one almost certainly
    gets a CRC error on access.  NVDIMMs will always tear and always
    silently.  Until an application is audited to be robust in the
    presence of sector-tearing the usage of BTT is recommended.

  Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
  Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
  Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
  Wysocki, and Bob Moore"

* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
  arch, x86: pmem api for ensuring durability of persistent memory updates
  libnvdimm: Add sysfs numa_node to NVDIMM devices
  libnvdimm: Set numa_node to NVDIMM devices
  acpi: Add acpi_map_pxm_to_online_node()
  libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
  pmem: flag pmem block devices as non-rotational
  libnvdimm: enable iostat
  pmem: make_request cleanups
  libnvdimm, pmem: fix up max_hw_sectors
  libnvdimm, blk: add support for blk integrity
  libnvdimm, btt: add support for blk integrity
  fs/block_dev.c: skip rw_page if bdev has integrity
  libnvdimm: Non-Volatile Devices
  tools/testing/nvdimm: libnvdimm unit test infrastructure
  libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
  nd_btt: atomic sector updates
  libnvdimm: infrastructure for btt devices
  libnvdimm: write blk label set
  libnvdimm: write pmem label set
  libnvdimm: blk labels and namespace instantiation
  ...
2015-06-29 10:34:42 -07:00
Linus Torvalds
d93a74a91b linux-kselftest-4.2-rc1
This update adds two new test suites: futex and seccomp.
 In addition, it includes fixes for bugs in timers, other
 tests, and compile framework. It introduces new quicktest
 feature to enable users to choose to run tests that complete
 in a short time..
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVjagPAAoJEAsCRMQNDUMcAwkQAJ3Sk59zj+slDYxQ9TcckX6m
 n5YcqjCd7vxHu163f2R9wH+cxnS0LSn0bq79IHvTUYpr36wGEKpws7BLecKRlIUA
 0t1mpVcgEjT2tc8XhAlAGtXJ0FV7idQSzyJnlTTOdO6MyZkuJW9L+CL6q3Uzcfm5
 KroeZC+m6ZulUiYlpIc9epltO9l+szq+dJouaDan35oCAGOjV1VgBKfatAa1zmeX
 d5NM0lO7y4gAHwLvlMhDszAf5E5vSv7S4YfnHftV5ITjb9KQJcaluVnmsy8kaV+J
 Mv4KL4lPMiIZWTn4VWjiHsR48oXw5xXPfW9AhNz6UTxwFlgX3D/EVfBtCIJ1Arq0
 PmvpWuKOWBBbteEAQHUCHj/9X3VoX5Lrt9fps++/2+trwKbrS1qJWeyZuSPhbtOp
 qKbquIQpvzStg60igKcDu8E6vdDdHDY1hPPOR/n8izH8ZGpXA/K0SRUOAa2aI6ZI
 I3PoH38Rlz+BZsEz9uU4zIOEOpl4Js6n6GYvh0MRuT2bzhjpF+rvFd1ej/zw0r62
 OGZp9n68ZLwktPEvagXT4pFJQuPcJuauW7g8nhH+jU+6LAJh8pRGDBx9uBuCTWti
 DHX6bBqosWBMjlI6i073UE7lmnLB9hxtirZOrkWf7NkLl53pOiVg7F1vQx8pZRpU
 Qir9+ypbuRnadWaz2MB2
 =co5w
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This update adds two new test suites: futex and seccomp.

  In addition, it includes fixes for bugs in timers, other tests, and
  compile framework.  It introduces new quicktest feature to enable
  users to choose to run tests that complete in a short time"

* tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: add quicktest support
  selftests: add seccomp suite
  selftest, x86: fix incorrect comment
  tools selftests: Fix 'clean' target with make 3.81
  selftests/futex: Add .gitignore
  kselftest: Add exit code defines
  selftests: Add futex tests to the top-level Makefile
  selftests/futex: Increment ksft pass and fail counters
  selftests/futex: Update Makefile to use lib.mk
  selftests: Add futex functional tests
  kselftests: timers: Check _ALARM clockids are supported before suspending
  kselftests: timers: Ease alarmtimer-suspend unreasonable latency value
  kselftests: timers: Increase delay between suspends in alarmtimer-suspend
  selftests/exec: do not install subdir as it is already created
  selftests/ftrace: install test.d
  selftests: copy TEST_DIRS to INSTALL_PATH
  Test compaction of mlocked memory
  selftests/mount: output WARN messages when mount test skipped
  selftests/timers: Make git ignore all binaries in timers test suite
2015-06-29 09:11:10 -07:00
Linus Torvalds
23908db413 Staging driver patches for 4.2-rc1
Here's the big, really big, staging tree patches for 4.2-rc1.
 
 Loads of stuff in here, almost all just coding style fixes / churn, and
 a few new drivers as well, one of which I just disabled from the build a
 few minutes ago due to way too many build warnings.
 
 Other than the one "disable this driver" patch, all of these have been
 in linux-next for quite a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlWNpc0ACgkQMUfUDdst+ym8EgCg0pL1Qcf9Se3jAc96fLt+itpv
 Rd0AoI9uJcq8Qm7d+IXnz3ojLnN9xvN3
 =xt0u
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big, really big, staging tree patches for 4.2-rc1.

  Loads of stuff in here, almost all just coding style fixes / churn,
  and a few new drivers as well, one of which I just disabled from the
  build a few minutes ago due to way too many build warnings.

  Other than the one "disable this driver" patch, all of these have been
  in linux-next for quite a while with no reported issues"

* tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits)
  staging: wilc1000: disable driver due to build warnings
  Staging: rts5208: fix CHANGE_LINK_STATE value
  Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis
  Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines
  Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators
  Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs
  Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters
  Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs
  Staging: sm750fb: modedb.h: Shorten lines to under 80 characters
  Staging: sm750fb: modedb.h: Replace spaces with tabs
  staging: comedi: addi_apci_3120: rename 'this_board' variables
  staging: comedi: addi_apci_1516: rename 'this_board' variables
  staging: comedi: ni_atmio: cleanup ni_getboardtype()
  staging: comedi: vmk80xx: sanity check context used to get the boardinfo
  staging: comedi: vmk80xx: rename 'boardinfo' variables
  staging: comedi: dt3000: rename 'this_board' variables
  staging: comedi: adv_pci_dio: rename 'this_board' variables
  staging: comedi: cb_pcidas64: rename 'thisboard' variables
  staging: comedi: cb_pcidas: rename 'thisboard' variables
  staging: comedi: me4000: rename 'thisboard' variables
  ...
2015-06-26 15:46:08 -07:00
Linus Torvalds
d87823813f Char/Misc driver patches for 4.2-rc1
Here's the big char/misc driver pull request for 4.2-rc1.
 
 Lots of mei, extcon, coresight, uio, mic, and other driver updates in
 here.  Full details in the shortlog.  All of these have been in
 linux-next for some time with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlWNn0gACgkQMUfUDdst+ykCCQCgvdF4F2+Hy9+RATdk22ak1uq1
 JDMAoJTf4oyaIEdaiOKfEIWg9MasS42B
 =H5wD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver pull request for 4.2-rc1.

  Lots of mei, extcon, coresight, uio, mic, and other driver updates in
  here.  Full details in the shortlog.  All of these have been in
  linux-next for some time with no reported problems"

* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
  mei: me: wait for power gating exit confirmation
  mei: reset flow control on the last client disconnection
  MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
  misc: sram: sort and clean up included headers
  misc: sram: move reserved block logic out of probe function
  misc: sram: add private struct device and virt_base members
  misc: sram: report correct SRAM pool size
  misc: sram: bump error message level on unclean driver unbinding
  misc: sram: fix device node reference leak on error
  misc: sram: fix enabled clock leak on error path
  misc: mic: Fix reported static checker warning
  misc: mic: Fix randconfig build error by including errno.h
  uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
  uio: pruss: Add CONFIG_HAS_IOMEM dependence
  uio: pruss: Include <linux/sizes.h>
  extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
  char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
  Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
  parport: check exclusive access before register
  w1: use correct lock on error in w1_seq_show()
  ...
2015-06-26 14:51:15 -07:00
Linus Torvalds
e382608254 This patch series contains several clean ups and even a new trace clock
"monitonic raw". Also some enhancements to make the ring buffer even
 faster. But the biggest and most noticeable change is the renaming of
 the ftrace* files, structures and variables that have to deal with
 trace events.
 
 Over the years I've had several developers tell me about their confusion
 with what ftrace is compared to events. Technically, "ftrace" is the
 infrastructure to do the function hooks, which include tracing and also
 helps with live kernel patching. But the trace events are a separate
 entity altogether, and the files that affect the trace events should
 not be named "ftrace". These include:
 
   include/trace/ftrace.h	->	include/trace/trace_events.h
   include/linux/ftrace_event.h	->	include/linux/trace_events.h
 
 Also, functions that are specific for trace events have also been renamed:
 
   ftrace_print_*()		->	trace_print_*()
   (un)register_ftrace_event()	->	(un)register_trace_event()
   ftrace_event_name()		->	trace_event_name()
   ftrace_trigger_soft_disabled()->	trace_trigger_soft_disabled()
   ftrace_define_fields_##call() ->	trace_define_fields_##call()
   ftrace_get_offsets_##call()	->	trace_get_offsets_##call()
 
 Structures have been renamed:
 
   ftrace_event_file		->	trace_event_file
   ftrace_event_{call,class}	->	trace_event_{call,class}
   ftrace_event_buffer		->	trace_event_buffer
   ftrace_subsystem_dir		->	trace_subsystem_dir
   ftrace_event_raw_##call	->	trace_event_raw_##call
   ftrace_event_data_offset_##call->	trace_event_data_offset_##call
   ftrace_event_type_funcs_##call ->	trace_event_type_funcs_##call
 
 And a few various variables and flags have also been updated.
 
 This has been sitting in linux-next for some time, and I have not heard
 a single complaint about this rename breaking anything. Mostly because
 these functions, variables and structures are mostly internal to the
 tracing system and are seldom (if ever) used by anything external to that.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJViYhVAAoJEEjnJuOKh9ldcJ0IAI+mytwoMAN/CWDE8pXrTrgs
 aHlcr1zorSzZ0Lq6lKsWP+V0VGVhP8KWO16vl35HaM5ZB9U+cDzWiGobI8JTHi/3
 eeTAPTjQdgrr/L+ZO1ApzS1jYPhN3Xi5L7xublcYMJjKfzU+bcYXg/x8gRt0QbG3
 S9QN/kBt0JIIjT7McN64m5JVk2OiU36LxXxwHgCqJvVCPHUrriAdIX7Z5KRpEv13
 zxgCN4d7Jiec/FsMW8dkO0vRlVAvudZWLL7oDmdsvNhnLy8nE79UOeHos2c1qifQ
 LV4DeQ+2Hlu7w9wxixHuoOgNXDUEiQPJXzPc/CuCahiTL9N/urQSGQDoOVMltR4=
 =hkdz
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This patch series contains several clean ups and even a new trace
  clock "monitonic raw".  Also some enhancements to make the ring buffer
  even faster.  But the biggest and most noticeable change is the
  renaming of the ftrace* files, structures and variables that have to
  deal with trace events.

  Over the years I've had several developers tell me about their
  confusion with what ftrace is compared to events.  Technically,
  "ftrace" is the infrastructure to do the function hooks, which include
  tracing and also helps with live kernel patching.  But the trace
  events are a separate entity altogether, and the files that affect the
  trace events should not be named "ftrace".  These include:

    include/trace/ftrace.h         ->    include/trace/trace_events.h
    include/linux/ftrace_event.h   ->    include/linux/trace_events.h

  Also, functions that are specific for trace events have also been renamed:

    ftrace_print_*()               ->    trace_print_*()
    (un)register_ftrace_event()    ->    (un)register_trace_event()
    ftrace_event_name()            ->    trace_event_name()
    ftrace_trigger_soft_disabled() ->    trace_trigger_soft_disabled()
    ftrace_define_fields_##call()  ->    trace_define_fields_##call()
    ftrace_get_offsets_##call()    ->    trace_get_offsets_##call()

  Structures have been renamed:

    ftrace_event_file              ->    trace_event_file
    ftrace_event_{call,class}      ->    trace_event_{call,class}
    ftrace_event_buffer            ->    trace_event_buffer
    ftrace_subsystem_dir           ->    trace_subsystem_dir
    ftrace_event_raw_##call        ->    trace_event_raw_##call
    ftrace_event_data_offset_##call->    trace_event_data_offset_##call
    ftrace_event_type_funcs_##call ->    trace_event_type_funcs_##call

  And a few various variables and flags have also been updated.

  This has been sitting in linux-next for some time, and I have not
  heard a single complaint about this rename breaking anything.  Mostly
  because these functions, variables and structures are mostly internal
  to the tracing system and are seldom (if ever) used by anything
  external to that"

* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  ring_buffer: Allow to exit the ring buffer benchmark immediately
  ring-buffer-benchmark: Fix the wrong type
  ring-buffer-benchmark: Fix the wrong param in module_param
  ring-buffer: Add enum names for the context levels
  ring-buffer: Remove useless unused tracing_off_permanent()
  ring-buffer: Give NMIs a chance to lock the reader_lock
  ring-buffer: Add trace_recursive checks to ring_buffer_write()
  ring-buffer: Allways do the trace_recursive checks
  ring-buffer: Move recursive check to per_cpu descriptor
  ring-buffer: Add unlikelys to make fast path the default
  tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
  tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
  tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
  tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
  tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
  tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
  tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
  tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
  tracing: Rename ftrace_event_name() to trace_event_name()
  tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
  ...
2015-06-26 14:02:43 -07:00
Dan Williams
5813882094 libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
Upon detection of an unarmed dimm in a region, arrange for descendant
BTT, PMEM, or BLK instances to be read-only.  A dimm is primarily marked
"unarmed" via flags passed by platform firmware (NFIT).

The flags in the NFIT memory device sub-structure indicate the state of
the data on the nvdimm relative to its energy source or last "flush to
persistence".  For the most part there is nothing the driver can do but
advertise the state of these flags in sysfs and emit a message if
firmware indicates that the contents of the device may be corrupted.
However, for the case of ACPI_NFIT_MEM_ARMED, the driver can arrange for
the block devices incorporating that nvdimm to be marked read-only.
This is a safe default as the data is still available and new writes are
held off until the administrator either forces read-write mode, or the
energy source becomes armed.

A 'read_only' attribute is added to REGION devices to allow for
overriding the default read-only policy of all descendant block devices.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-26 11:23:38 -04:00
Dan Williams
6bc756193f tools/testing/nvdimm: libnvdimm unit test infrastructure
'libnvdimm' is the first driver sub-system in the kernel to implement
mocking for unit test coverage.  The nfit_test module gets built as an
external module and arranges for external module replacements of nfit,
libnvdimm, nd_pmem, and nd_blk.  These replacements use the linker
--wrap option to redirect calls to ioremap() + request_mem_region() to
custom defined unit test resources.  The end result is a fully
functional nvdimm_bus, as far as userspace is concerned, but with the
capability to perform otherwise destructive tests on emulated resources.

Q: Why not use QEMU for this emulation?
QEMU is not suitable for unit testing.  QEMU's role is to faithfully
emulate the platform.  A unit test's role is to unfaithfully implement
the platform with the goal of triggering bugs in the corners of the
sub-system implementation.  As bugs are discovered in platforms, or the
sub-system itself, the unit tests are extended to backstop a fix with a
reproducer unit test.

Another problem with QEMU is that it would require coordination of 3
software projects instead of 2 (kernel + libndctl [1]) to maintain and
execute the tests.  The chances for bit rot and the difficulty of
getting the tests running goes up non-linearly the more components
involved.


Q: Why submit this to the kernel tree instead of external modules in
   libndctl?
Simple, to alleviate the same risk that out-of-tree external modules
face.  Updates to drivers/nvdimm/ can be immediately evaluated to see if
they have any impact on tools/testing/nvdimm/.


Q: What are the negative implications of merging this?
It is a unique maintenance burden because the purpose of mocking an
interface to enable a unit test is to purposefully short circuit the
semantics of a routine to enable testing.  For example
__wrap_ioremap_cache() fakes the pmem driver into "ioremap()'ing" a test
resource buffer allocated by dma_alloc_coherent().  The future
maintenance burden hits when someone changes the semantics of
ioremap_cache() and wonders what the implications are for the unit test.

[1]: https://github.com/pmem/ndctl

Cc: <linux-acpi@vger.kernel.org>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-26 11:23:38 -04:00
Li Zhang
36c8bb56a9 perf symbols: Check access permission when reading symbol files
There 2 problems when reading symbols files:

*  It doesn't report any errors even if when users specify symbol
   files which don't exist with --kallsyms or --vmlinux. The result
   just shows the address without symbols, which is not what is expected.
   So it's better to report errors and exit the program.

*  When using command perf report --kallsyms=/proc/kallsyms with a
   non-root user, symbols are resolved. Then select one symbol and
   annotate it, it reports the error as the following:
   Can't annotate __clear_user: No vmlinux file with build id xxx was
   found.

   The problem is caused by reading /proc/kcore without access permission.
   /proc/kcore requires CAP_SYS_RAWIO capability to access, so it needs to
   change access permission to allow a specific user to read /proc/kcore or
   use root to execute the perf command.

This patch is to report errors when symbol files specified by users
don't exist. And check access permission of /proc/kcore when reading it.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1434704253-2632-1-git-send-email-zhlcindy@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26 12:11:53 -03:00
Jiri Olsa
32b8af82e3 perf stat: Introduce --per-thread option
Currently all the -p option PID arguments tasks values get aggregated
and printed as single values.

Adding --per-tasks option to print values per task.

  $ perf stat  -e cycles,instructions --per-thread -p 30190,30242
  ^C
   Performance counter stats for process id '30190,30242':

               cat-30190                     0      cycles
               yes-30242         3,842,525,421      cycles
               cat-30190                     0      instructions
               yes-30242        10,370,817,010      instructions

         1.143155657 seconds time elapsed

Also works under interval mode:

  $ perf stat  -e cycles,instructions --per-thread -p 30190,30242 -I 1000
  #           time             comm-pid                  counts unit events
       1.000073435              cat-30190                89,058      cycles
       1.000073435              yes-30242         3,360,786,902      cycles                     (100.00%)
       1.000073435              cat-30190                14,066      instructions
       1.000073435              yes-30242         9,069,937,462      instructions
       2.000204830              cat-30190                     0      cycles
       2.000204830              yes-30242         3,351,667,626      cycles
       2.000204830              cat-30190                     0      instructions
       2.000204830              yes-30242         9,045,796,885      instructions
  ^C     2.771286639              cat-30190                     0      cycles
       2.771286639              yes-30242         2,593,884,166      cycles
       2.771286639              cat-30190                     0      instructions
       2.771286639              yes-30242         7,001,171,191      instructions

It works only with -t and -p options, otherwise following error is
printed:

  $ perf stat  -e cycles --per-thread  -I 1000 ls
  The --per-thread option is only available when monitoring via -p -t options.
      -p, --pid <pid>       stat events on existing process id
      -t, --tid <tid>       stat events on existing thread id

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26 12:05:04 -03:00
Jiri Olsa
d4f63a4741 perf stat: Introduce print_counters function
Centralize counters print code into single print_counters function.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-22-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26 12:00:50 -03:00