Commit Graph

46 Commits

Author SHA1 Message Date
Rodríguez Barbarin, José Javier
2025b2ca80 mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-lpc requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.

After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.

Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-4-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20 14:24:01 +02:00
Rodríguez Barbarin, José Javier
9be24faadd mcb-pci: Reallocate memory region to avoid memory overlapping
mcb-pci requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.

After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.

Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-3-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20 14:24:01 +02:00
Rodríguez Barbarin, José Javier
a889c276d3 mcb: Return actual parsed size when reading chameleon table
The function chameleon_parse_cells() returns the number of cells
parsed which has an undetermined size. This return value is only
used for error checking but the number of cells is never used.

Change return value to be number of bytes parsed to allow for
memory management improvements.

Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20 14:24:01 +02:00
Greg Kroah-Hartman
2a81ada32f driver core: make struct bus_type.uevent() take a const *
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.

Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-27 13:45:52 +01:00
Yang Yingliang
728ac33892 mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount
of bus and device name are leaked. Fix this by calling put_device() to give up
the reference, so they can be released in mcb_release_dev() and kobject_cleanup().

Fixes: 3764e82e51 ("drivers: Introduce MEN Chameleon Bus")
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/ebfb06e39b19272f0197fa9136b5e4b6f34ad732.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-02 17:48:04 +01:00
Zhengchao Shao
d723746256 drivers: mcb: fix resource leak in mcb_probe()
When probe hook function failed in mcb_probe(), it doesn't put the device.
Compiled test only.

Fixes: 7bc364097a ("mcb: Acquire reference to device in probe")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/9f87de36bfb85158b506cb78c6fc9db3f6a3bad1.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-02 17:48:04 +01:00
keliu
3af0b1d34a drivers: mcb: directly use ida_alloc()/free()
Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove() .

Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/480676bee970da16bf1fa8565277240014395ba3.1657607743.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12 09:04:55 +02:00
Dan Carpenter
25a1433216 mcb: fix error handling in mcb_alloc_bus()
There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9fe ("mcb: Implement bus->dev.release callback")
Fixes: 18d2881980 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 11:22:26 +02:00
Uwe Kleine-König
fc7a6209d5 bus: Make remove callback return void
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.

This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.

With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.

Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21 11:53:42 +02:00
Zhen Lei
6f746d485f mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
Use DEFINE_RES_MEM() to save a couple of lines of code, which makes the
code a bit shorter and easier to read. The start address does not need to
appear twice.

By the way, the value of '.end' should be "start + size - 1". So the
previous writing should have omitted subtracted 1.

Fixes: acf5e051ac ("MCB: add support for SC31 to mcb-lpc")
Fixes: 73edc8f7cc ("mcb: Added support for LPC or non PCI based MCB carrier")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210616073030.834-2-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24 15:56:25 +02:00
Johannes Thumshirn
891e60368b drivers: mcb: use symbol namespaces
Now that we have symbol namespaces, use them in MCB to not pollute the
default namespace with MCB internals.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Michael Moese <mmoese@suse.de>
Link: https://lore.kernel.org/r/20191016100158.1400-1-jthumshirn@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-03 19:54:53 +01:00
Thomas Gleixner
b886d83c5b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:17 +02:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner
457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Johannes Thumshirn
29ea6be366 mcb: add Altera PCI ID to mcb-pci
Some older PCI attached MEN FPGAs use an Altera PCI Vendor ID instead
of the MEN one. Add it to the PCI ID table so the driver automatically
attaches to it.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Ben Turner <ben.turner@21net.com>
Tested-by: Ben Turner <ben.turner@21net.com>
Cc: Andreas Geißler <andreas.geissler@men.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:13:48 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds
bafb0762cb Char/Misc drivers for 4.14-rc1
Here is the big char/misc driver update for 4.14-rc1.
 
 Lots of different stuff in here, it's been an active development cycle
 for some reason.  Highlights are:
   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.
   - coresight updates and fixes
   - mux driver file renames to be a bit "nicer"
   - intel_th driver updates
   - normal set of hyper-v updates and changes
   - small fpga subsystem and driver updates
   - lots of const code changes all over the driver trees
   - extcon driver updates
   - fmc driver subsystem upadates
   - w1 subsystem minor reworks and new features and drivers added
   - spmi driver updates
 
 Plus a smattering of other minor driver updates and fixes.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
 bePIh/JI5WxWoHK+wEbY
 =hYWx
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.14-rc1.

  Lots of different stuff in here, it's been an active development cycle
  for some reason. Highlights are:

   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.

   - coresight updates and fixes

   - mux driver file renames to be a bit "nicer"

   - intel_th driver updates

   - normal set of hyper-v updates and changes

   - small fpga subsystem and driver updates

   - lots of const code changes all over the driver trees

   - extcon driver updates

   - fmc driver subsystem upadates

   - w1 subsystem minor reworks and new features and drivers added

   - spmi driver updates

  Plus a smattering of other minor driver updates and fixes.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
  ANDROID: binder: don't queue async transactions to thread.
  ANDROID: binder: don't enqueue death notifications to thread todo.
  ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
  ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
  ANDROID: binder: push new transactions to waiting threads.
  ANDROID: binder: remove proc waitqueue
  android: binder: Add page usage in binder stats
  android: binder: fixup crash introduced by moving buffer hdr
  drivers: w1: add hwmon temp support for w1_therm
  drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
  drivers: w1: add hwmon support structures
  eeprom: idt_89hpesx: Support both ACPI and OF probing
  mcb: Fix an error handling path in 'chameleon_parse_cells()'
  MCB: add support for SC31 to mcb-lpc
  mux: make device_type const
  char: virtio: constify attribute_group structures.
  Documentation/ABI: document the nvmem sysfs files
  lkdtm: fix spelling mistake: "incremeted" -> "incremented"
  perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
  nvmem: include linux/err.h from header
  ...
2017-09-05 11:08:17 -07:00
Christophe JAILLET
5ec6bff199 mcb: Fix an error handling path in 'chameleon_parse_cells()'
If 'chameleon_get_bar()' fails, we will return 0, which mean success.
We should return the corresponding error code instead.

Remove the useless initialisation of 'ret' which was hiding the issue.
(if 'ret' is not set, gcc generates a warning ("warning: ‘ret’ may be used
uninitialized in this function"))

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31 18:49:41 +02:00
Michael Moese
acf5e051ac MCB: add support for SC31 to mcb-lpc
This patch adds the resources and DMI ID's for the MEN SC31,
which uses a different address region to map the LPC bus than
the one used for the existing SC24.

Signed-off-by: Michael Moese <michael.moese@men.de>
[jth add stable tag]
Cc: <stable@vger.kernel.org> (v4.9+)
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31 18:49:41 +02:00
Johannes Thumshirn
2ce8008711 mcb: introduce mcb_get_resource()
Introduce mcb_get_resource() as a common accessor to a mcb device's memory or
IRQ resources.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 20:51:22 +02:00
Michael Moese
c836790ae5 mcb: fix compiler warning logical-op in mcb-parse.c
The expression was clearly wrong, the logical AND of expressions
must be changed to a logical OR.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Moese <michael.moese@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15 10:52:37 +01:00
Michael Moese
2d8784df1a mcb: Add a dma_device to mcb_device
When performing DMA operations on a MCB device, the device needed
for using the DMA API is "mcb_device->bus_carrier".
This is rather lengthy, so a shortcut is introduced to struct mcb_device
in order to ensure the MCB device driver uses the correct device for DMA
operations.

Signed-off-by: Michael Moese <michael.moese@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27 12:33:47 +02:00
Michael Moese
15bb81d334 mcb: Enable PCI bus mastering by default
In order to successfully perform DMA operations on PCI devices,
it is necessary to enble PCI bus mastering, so enable it by default.

Signed-off-by: Michael Moese <michael.moese@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27 12:33:47 +02:00
Johannes Thumshirn
b58189b3c5 mcb: remove sub-device handling code
The MEN Chameleon specification states that a chameleon FPGA can include a
bridge descriptor, which then opens up a new bus behind this bridge. MCB
included subdevice handling code in the core, but no support for bus
descriptors in the parser, due to a lack of hardware access.

As this is technically dead code, but it gets executed on a device add,
I've decided to remove it.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:16:24 +02:00
Andreas Werner
ffc7bb3857 mcb: Added bar descriptor support for non PCI bus MCB carrier
Added support for the bar descriptor. This type is used for FPGAs
connect to the LPC or to a non PCI bus.

The Bar descriptor could have a maximum of 6 BARs. Each of the
devices within the FPGA could be mapped to a different BAR.
The BAR descriptor is comparable to the PCI header.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
[ free bar descriptor in the non-error case ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:16:24 +02:00
Andreas Werner
73edc8f7cc mcb: Added support for LPC or non PCI based MCB carrier
Add support for MCB bases FPGAs connected to the LPC or
non PCI Bus.

This driver currently supports the SC24 board. The FPGA
is connected to the LPC bus and is identified using the BIOS
DMI string.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:16:24 +02:00
Johannes Thumshirn
4d2ec85753 mcb: Acquire reference to carrier module in core
Acquire a reference to the carrier's kernel module in bus code, so
it can't be removed from the kernel while it still has a bus and thus
possibly devices attached to it.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 18:49:30 -07:00
Johannes Thumshirn
7bc364097a mcb: Acquire reference to device in probe
mcb_probe() does not aqcuire a reference to the probed device but drops one
when removing the device. As it is actually using the device, it should grab
a reference via get_device().

This could lead to a panic found with a rmmod/modprobe stress test

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 18:49:30 -07:00
Andreas Werner
8cd1f9d01c mcb: Delete num_cells variable which is not required
The num_cells variable is only used in the dev_dbg print,
but we can directly use the ret variable which also includes the same
value.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 15:52:28 -07:00
Andreas Werner
f75564d343 mcb: Fixed bar number assignment for the gdd
The bar number is found in reg2 within the gdd. Therefore
we need to change the assigment from reg1 to reg2 which
is the correct location.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Fixes: '3764e82e5' drivers: Introduce MEN Chameleon Bus
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 15:52:28 -07:00
Andreas Werner
d19366f1d6 mcb: Replace ioremap and request_region with the devm version
Replaced ioremap with devm_ioremap and request_mem_region with
devm_request_mem_region. This makes the code much more cleaner.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 15:52:28 -07:00
Johannes Thumshirn
5d9e2ab9fe mcb: Implement bus->dev.release callback
The mcb_bus structure previously was released in mcb_release_bus. This lead to
the following warning on module unload:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 2032 at drivers/base/core.c:251 device_release+0x73/0x90
Device 'mcb:0' does not have a release() function, it is broken and must be fixed.
Modules linked in: men_z135_uart mcb_pci(-) mcb
CPU: 1 PID: 2032 Comm: rmmod Not tainted 4.6.0-rc4+ #3
Hardware name: N/A N/A/COMe-mBTi10, BIOS MVV1R921 X64 10/14/2015
 00000286 00000286 c0117de4 c12d6f16 c0117e2c c18be0d3 c0117dfc c104f6e1
 000000fb f5ccbe08 f5ccbe00 f5c64600 c0117e18 c104f728 00000009 00000000
 c0117e10 c18db674 c0117e2c c0117e3c c13ce5c3 c18be0d3 000000fb c18db674
Call Trace:
 [<c12d6f16>] dump_stack+0x47/0x61
 [<c104f6e1>] __warn+0xc1/0xe0
 [<c104f728>] warn_slowpath_fmt+0x28/0x30
 [<c13ce5c3>] device_release+0x73/0x90
 [<c12d92e4>] kobject_release+0x34/0x80
 [<c12d929d>] ? kobject_del+0x2d/0x40
 [<c12d9205>] kobject_put+0x25/0x50
 [<c13ce77f>] put_device+0xf/0x20
 [<c13d114b>] klist_devices_put+0xb/0x10
 [<c1752673>] klist_next+0x73/0xf0
 [<c13d1140>] ? unbind_store+0x100/0x100
 [<f8a23370>] ? mcb_bus_add_devices+0x30/0x30 [mcb]
 [<c13d0a81>] bus_for_each_dev+0x51/0x80
 [<f8a23319>] mcb_release_bus+0x19/0x40 [mcb]
 [<f8a23370>] ? mcb_bus_add_devices+0x30/0x30 [mcb]
 [<f8a2b033>] mcb_pci_remove+0x13/0x20 [mcb_pci]
 [<c130d358>] pci_device_remove+0x28/0xb0
 [<c13d201b>] __device_release_driver+0x7b/0x110
 [<c13d2847>] driver_detach+0x87/0x90
 [<c13d1b9b>] bus_remove_driver+0x3b/0x80
 [<c13d2ed0>] driver_unregister+0x20/0x50
 [<c130be53>] pci_unregister_driver+0x13/0x60
 [<f8a2b1f4>] mcb_pci_driver_exit+0xd/0xf [mcb_pci]
 [<c10be588>] SyS_delete_module+0x138/0x200
 [<c1159208>] ? ____fput+0x8/0x10
 [<c1068054>] ? task_work_run+0x74/0x90
 [<c1001879>] do_fast_syscall_32+0x69/0x120
 [<c1757597>] sysenter_past_esp+0x40/0x6a
---[ end trace 1ed34c2aa3019875 ]---

Release a mcb_bus' memory on the device's release callback, to avoid above
warning.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 15:52:28 -07:00
Johannes Thumshirn
803f1ca60d mcb: export bus information via sysfs
Export information about the bus stored in the FPGA's header to userspace via
sysfs, instead of hiding it in pr_debug()s from everyone.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 15:07:35 -07:00
Johannes Thumshirn
18d2881980 mcb: Correctly initialize the bus's device
The mcb bus' device member wasn't correctly initialized and thus wasn't placed
correctly into the driver model.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 15:07:35 -07:00
Johannes Thumshirn
169883a63e mcb: Destroy IDA on module unload
Destroy mcb_ida on module_unload

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-29 09:02:16 +09:00
Alexey Khoroshilov
bf25c19979 mcb: Do not return zero on error path in mcb_pci_probe()
There is an error path in mcb_pci_probe() where
it returns zero instead of error code.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-29 09:02:16 +09:00
Alexey Khoroshilov
41ada9df7f mcb: Fix error handling in mcb_pci_probe()
If a MCB PCI Carrier device is IO mapped insted of memory-mapped,
the memory of the PCI device is still not unmapped.

Also the patch adds deallocation of the bus
if chameleon_parse_cells() fails.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 05:10:01 +01:00
Dan Carpenter
d86fb45b5c mcb: request_mem_region() returns NULL on error
The code here is checking for IS_ERR() when request_mem_region() only
returns NULL on error and never an ERR_PTR.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03 16:15:30 +02:00
Johannes Thumshirn
a48742bce1 mcb: Fix error path of mcb_pci_probe
If a MCB PCI Carrier device is IO mapped insted of memory-mapped (which is
currently unsupported by the upstream driver) the probe function bails out
with -ENOTSUPP.

In this case the memory of the PCI device was not unmapped.
Also rename error label to reflect what will happen at the destination (suggested
by Julia Lawall <julia.lawall@lip6.fr>.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03 15:48:51 -08:00
Johannes Thumshirn
7b7c54914f mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0
Currently it is not possible to have a kernel with built-in MCB attached
devices. This results out of the fact that mcb-pci requests PCI BAR 0, then
parses the chameleon table and calls the driver's probe function before
releasing BAR 0 again. When building the kernel with modules this is not a
problem (and therefore it wasn't detected by my tests yet).

A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device.
0x200 bytes is the maximum size of a Chameleon v2 Table.

Also this patch stops disabling the PCI device on successful registration of MCB
devices.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 15:46:37 -08:00
Johannes Thumshirn
4ec65b77c6 mcb: Add support for shared PCI IRQs
Add support for shared PCI IRQs to mcb and mcb-pci.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 17:38:11 -07:00
Christoph Jaeger
7c73528273 drivers: mcb: fix memory leak in chameleon_parse_cells() error path
chameleon_parse_cells() bails out if chameleon descriptor type is
invalid but does not free the storage 'header' points to.

Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:28:47 -07:00
Johannes Thumshirn
07792c7e10 drivers: mcb: Fix build error discovered by 0-day bot
Make mcb depend on HAS_IOMEM and mcb-pci depend on PCI. This fixes build errors
discovered by the 0-day kernel build testing system.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-09 10:22:46 -07:00
Paul Gortmaker
0db03f3f0c drivers/mcb: do not set default Kconfig variable to modular
Coverage builds found this build fail in ARM ebsa110_defconfig:

drivers/mcb/mcb-parse.c: In function 'chameleon_parse_cells':
drivers/mcb/mcb-parse.c:105:2: error: implicit declaration of function 'memcpy_fromio' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/mcb/mcb-parse.o] Error 1

A simple bisect will output this:

3764e82e51 is the first bad commit
commit 3764e82e51
Author: Johannes Thumshirn <johannes.thumshirn@men.de>
Date:   Wed Feb 26 17:29:05 2014 +0100

    drivers: Introduce MEN Chameleon Bus

The above commit used "default m" which is wrong.  New drivers
should never be globally enabled with "default y/m".  Whether
this driver makes sense to build on ARM is an independent issue.

Here we delete the "default m" line, which is the equivalent of
"default n".

Cc: Johannes Thumshirn <johannes.thumshirn@men.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08 21:55:39 -08:00
Johannes Thumshirn
b71bb86398 mcb: Add PCI carrier for MEN Chameleon Bus
Add support for MCB over PCI devices. Both PCI attached on-board Chameleon FPGAs
as well as CompactPCI based MCB carrier cards are supported with this driver.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:47:12 -08:00
Johannes Thumshirn
3764e82e51 drivers: Introduce MEN Chameleon Bus
The MCB (MEN Chameleon Bus) is a Bus specific to MEN Mikroelektronik
FPGA based devices. It is used to identify MCB based IP-Cores within
an FPGA and provide the necessary framework for instantiating drivers
for these devices.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:36:37 -08:00