Since the recent refactoring, it's been reported that some USB-audio
devices (typically webcams) are no longer detected properly by
PulseAudio. The debug session revealed that it's failing at probing
by PA to try the sample rate 44.1kHz while the device has discrete
sample rates other than 44.1kHz. But the puzzle was that arecord
works as is, and some other devices with the discrete rates work,
either.
After all, this turned out to be the lack of the dependencies in a few
hw constraint rules: snd_pcm_hw_rule_add() has the (variable)
arguments specifying the dependent parameters, and some functions
didn't set the target parameter itself as the dependencies. This
resulted in an invalid parameter that could be generated only in a
certain call pattern. This bug itself has been present in the code,
but it didn't trigger errors just because the rules were casually
avoiding such a corner case. After the recent refactoring and
cleanup, however, the hw constraints work "as expected", and the
problem surfaced now.
For fixing the problem above, this patch adds the missing dependent
parameters to each snd_pcm_hw_rule() call.
Fixes: bc4e94aa8e ("ALSA: usb-audio: Handle discrete rates properly in hw constraints")
BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181014
Link: https://lore.kernel.org/r/20210120204554.30177-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
and can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KyY7
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"
* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: systemport: free dev before on error path
net: usb: cdc_ncm: don't spew notifications
net: mscc: ocelot: Fix multicast to the CPU port
tcp: Fix potential use-after-free due to double kfree()
bpf: Fix signed_{sub,add32}_overflows type handling
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
tcp: fix TCP socket rehash stats mis-accounting
net: dsa: b53: fix an off by one in checking "vlan->vid"
tcp: do not mess with cloned skbs in tcp_add_backlog()
selftests: net: fib_tests: remove duplicate log test
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
sh_eth: Fix power down vs. is_opened flag ordering
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
netfilter: rpfilter: mask ecn bits before fib lookup
udp: mask TOS bits in udp_v4_early_demux()
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYAhFXwAKCRCAXGG7T9hj
vjCeAQCR74dTRa34VJNDWdDME1NMSlFln8bIL+lvrC3/2p2E5QD/eLcgVFdDpeZ9
dMjKzcddPL1mI99SurwNmyai4U9d6A4=
=PbJO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for build failure showing up in some configurations"
* tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix 'nopvspin' build error
On the following call path, `sig->pkey_algo` is not assigned
in asymmetric_key_verify_signature(), which causes runtime
crash in public_key_verify_signature().
keyctl_pkey_verify
asymmetric_key_verify_signature
verify_signature
public_key_verify_signature
This patch simply check this situation and fixes the crash
caused by NULL pointer.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: João Fonseca <jpedrofonseca@ua.pt>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the recent actions to convert readpages aops to readahead, the
NULL checks of readpages aops in cachefiles_read_or_alloc_page() may
hit falsely. More badly, it's an ASSERT() call, and this panics.
Drop the superfluous NULL checks for fixing this regression.
[DH: Note that cachefiles never actually used readpages, so this check was
never actually necessary]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245
Fixes: 9ae326a690 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set the acpi_device pointer which acpi_bus_get_device() returns-by-
reference to NULL on errors.
We've recently had 2 cases where callers of acpi_bus_get_device()
did not properly error check the return value, so set the returned-
by-reference acpi_device pointer to NULL, because at least some
callers of acpi_bus_get_device() expect that to be done on errors.
[ rjw: This issue was exposed by commit 71da201f38 ("ACPI: scan:
Defer enumeration of devices with _DEP lists") which caused it to
be much more likely to occur on some systems, but the real defect
had been introduced by an earlier commit. ]
Fixes: 40e7fcb192 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")
Fixes: bcfcd409d4 ("usb: split code locating ACPI companion into port and device")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Properly unwind step by step using refactored helpers from nvme_unmap_data
to avoid a potential double dma_unmap on a mapping failure.
Fixes: 7fe07d14f7 ("nvme-pci: merge nvme_free_iod into nvme_unmap_data")
Reported-by: Marc Orr <marcorr@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc Orr <marcorr@google.com>
Split out three helpers from nvme_unmap_data that will allow finer grained
unwinding from nvme_map_data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc Orr <marcorr@google.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmAII5ITHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqQyJB/9igHNraXi8aRWiNuhFE8cxB3ye4BBO
HtM74BXkmAXPiW2WUQ/yjZA2JMMe09qvculls0nDzpvnigxlNdO/oDELY8ezBB9C
NWH6D8D/LADHWJY8nzzmGVvhLoB+X2Jpdq+89XTghMjuv6kmDtg+3sBaeYjd3R5I
1EOS0IPzQteS8DX11BRRzG+UWRWVmMdbk9bCLkRXSzj5H9LyKecXuyo7vSCLEHeC
yyDz8TMtFv5fg/7rITHfT+zowf09qliE1Qhl+Pf7DioUIkrDvf4Lqhrs9mMXMZTq
NV+p1sX+IrCnC2O34jl4/8UYe+o9j/vSy1osKoiF4DAsb1+chxNtqSnH
=wV6c
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.11-20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
linux-can-fixes-for-5.11-20210120
All three patches are by Vincent Mailhol and fix a potential use after free bug
in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In
the TX-path the skb is used to read from after it was passed to the networking
stack with netif_rx_ni().
* tag 'linux-can-fixes-for-5.11-20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
====================
Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the error path, it should goto the error handling label to free
allocated memory rather than directly return.
Fixes: 31bc72d976 ("net: systemport: fetch and use clock resources")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...
Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multicast entries in the MAC table use the high bits of the MAC
address to encode the ports that should get the packets. But this port
mask does not work for the CPU port, to receive these packets on the
CPU port the MAC_CPU_COPY flag must be set.
Because of this IPv6 was effectively not working because neighbor
solicitations were never received. This was not apparent before commit
9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb
entries) as the IPv6 entries were broken so all incoming IPv6
multicast was then treated as unknown and flooded on all ports.
To fix this problem rework the ocelot_mact_learn() to set the
MAC_CPU_COPY flag when a multicast entry that target the CPU port is
added. For this we have to read back the ports endcoded in the pseudo
MAC address by the caller. It is not a very nice design but that avoid
changing the callers and should make backporting easier.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Fixes: 9403c158b8 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries")
Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct
request_sock and then can allocate inet_rsk(req)->ireq_opt. After that,
tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to
inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full
socket into ehash and sets NULL to ireq_opt. Otherwise,
tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full
socket.
The commit 01770a1661 ("tcp: fix race condition when creating child
sockets from syncookies") added a new path, in which more than one cores
create full sockets for the same SYN cookie. Currently, the core which
loses the race frees the full socket without resetting inet_opt, resulting
in that both sock_put() and reqsk_put() call kfree() for the same memory:
sock_put
sk_free
__sk_free
sk_destruct
__sk_destruct
sk->sk_destruct/inet_sock_destruct
kfree(rcu_dereference_protected(inet->inet_opt, 1));
reqsk_put
reqsk_free
__reqsk_free
req->rsk_ops->destructor/tcp_v4_reqsk_destructor
kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1));
Calling kmalloc() between the double kfree() can lead to use-after-free, so
this patch fixes it by setting NULL to inet_opt before sock_put().
As a side note, this kind of issue does not happen for IPv6. This is
because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which
correspond to ireq_opt in IPv4.
Fixes: 01770a1661 ("tcp: fix race condition when creating child sockets from syncookies")
CC: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-20
1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu.
2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann.
3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix signed_{sub,add32}_overflows type handling
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
====================
Link: https://lore.kernel.org/r/20210120163439.8160-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
the signature of signed_sub_overflows() had s64 a and s64 b as its input args
whereas now they are truncated to s32. Thus restore proper types. Also, the case
of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both
have s32 as inputs, therefore align the former.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
One customer reports a crash problem which causes by flush request. It
triggers a warning before crash.
/* new request after previous flush is completed */
if (ktime_after(req_start, mddev->prev_flush_start)) {
WARN_ON(mddev->flush_bio);
mddev->flush_bio = bio;
bio = NULL;
}
The WARN_ON is triggered. We use spin lock to protect prev_flush_start and
flush_bio in md_flush_request. But there is no lock protection in
md_submit_flush_data. It can set flush_bio to NULL first because of
compiler reordering write instructions.
For example, flush bio1 sets flush bio to NULL first in
md_submit_flush_data. An interrupt or vmware causing an extended stall
happen between updating flush_bio and prev_flush_start. Because flush_bio
is NULL, flush bio2 can get the lock and submit to underlayer disks. Then
flush bio1 updates prev_flush_start after the interrupt or extended stall.
Then flush bio3 enters in md_flush_request. The start time req_start is
behind prev_flush_start. The flush_bio is not NULL(flush bio2 hasn't
finished). So it can trigger the WARN_ON now. Then it calls INIT_WORK
again. INIT_WORK() will re-initialize the list pointers in the
work_struct, which then can result in a corrupted work list and the
work_struct queued a second time. With the work list corrupted, it can
lead in invalid work items being used and cause a crash in
process_one_work.
We need to make sure only one flush bio can be handled at one same time.
So add spin lock in md_submit_flush_data to protect prev_flush_start and
flush_bio in an atomic way.
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the peak_usb_netif_rx_ni().
Reordering the lines solves the issue.
Fixes: 0a25e1f4f1 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the canfd_frame cfd which aliases skb memory is accessed
after the netif_rx_ni().
Fixes: a8f820a380 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the netif_rx_ni() in:
stats->rx_bytes += cf->len;
Reordering the lines solves the issue.
Fixes: 39549eef35 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
While reviewing Christian's annotation patch I noticed that we have a
user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj
reference before we've completed the waiting.
Of course usually there's nothing bad happening here since userspace
keeps the reference, but we can't rely on userspace to play nice here!
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: bc9c80fe01 ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4")
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20210119130318.615145-1-daniel.vetter@ffwll.ch
The L1D flush fallback functions are not recoverable vs interrupts,
yet the scv entry flush runs with MSR[EE]=1. This can result in a
timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting
the EXRFI save area, which ends up corrupting userspace registers for
scv return.
Fix this by disabling RI and EE for the scv entry fallback flush.
Fixes: f79643787e ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport
Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
The previous commit 32efcc06d2 ("tcp: export count for rehash attempts")
would mis-account rehashing SNMP and socket stats:
a. During handshake of an active open, only counts the first
SYN timeout
b. After handshake of passive and active open, stop updating
after (roughly) TCP_RETRIES1 recurring RTOs
c. After the socket aborts, over count timeout_rehash by 1
This patch fixes this by checking the rehash result from sk_rethink_txhash.
Fixes: 32efcc06d2 ("tcp: export count for rehash attempts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The > comparison should be >= to prevent accessing one element beyond
the end of the dev->vlans[] array in the caller function, b53_vlan_add().
The "dev->vlans" array is allocated in the b53_switch_init() function
and it has "dev->num_vlans" elements.
Fixes: a2482d2ce3 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit reported that some skbs were sent with
the following invalid GSO properties :
- gso_size > 0
- gso_type == 0
This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2.
Juerg Haefliger was able to reproduce a similar issue using
a lan78xx NIC and a workload mixing TCP incoming traffic
and forwarded packets.
The problem is that tcp_add_backlog() is writing
over gso_segs and gso_size even if the incoming packet will not
be coalesced to the backlog tail packet.
While skb_try_coalesce() would bail out if tail packet is cloned,
this overwriting would lead to corruptions of other packets
cooked by lan78xx, sharing a common super-packet.
The strategy used by lan78xx is to use a big skb, and split
it into all received packets using skb_clone() to avoid copies.
The drawback of this strategy is that all the small skb share a common
struct skb_shared_info.
This patch rewrites TCP gso_size/gso_segs handling to only
happen on the tail skb, since skb_try_coalesce() made sure
it was not cloned.
Fixes: 4f693b55c3 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Juerg Haefliger <juergh@canonical.com>
Tested-by: Juerg Haefliger <juergh@canonical.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423
Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.
Reported-by: Antoine Tenart <atenart@redhat.com>
Fixes: 0d29169a70 ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in
little endian mode. That breaks compilation of our alignment handler
test:
/tmp/cco4l14N.s: Assembler messages:
/tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian
/tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian
make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1
These tests do pass on little endian machines, as the kernel will
still emulate those instructions even when running little
endian (which is arguably a kernel bug).
But we don't really need to test that case, so ifdef those
instructions out to get the alignment test building again.
Reported-by: Libor Pechacek <lpechacek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Libor Pechacek <lpechacek@suse.com>
Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0
but there is no parameters in NCI1.x.
Fixes: bcd684aace ("net/nfc/nci: Support NCI 2.x initial sequence")
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sh_eth_close() does a synchronous power down of the device before
marking it closed. Revert the order, to make sure the device is never
marked opened while suspended.
While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as
there is no reason to do a synchronous power down.
Fixes: 7fa2955ff7 ("sh_eth: Fix sleeping function called from invalid context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.
Fixes: 14136564c8 ("net: Add TLS RX offload feature")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault says:
====================
ipv4: Ensure ECN bits don't influence source address validation
Functions that end up calling fib_table_lookup() should clear the ECN
bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated
differently.
Most functions already clear the ECN bits, but there are a few cases
where this is not done. This series only fixes the ones related to
source address validation.
====================
Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.
Reproducer:
Create two netns, connected with a veth:
$ ip netns add ns0
$ ip netns add ns1
$ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
$ ip -netns ns0 link set dev veth01 up
$ ip -netns ns1 link set dev veth10 up
$ ip -netns ns0 address add 192.0.2.10/32 dev veth01
$ ip -netns ns1 address add 192.0.2.11/32 dev veth10
Add a route to ns1 in ns0:
$ ip -netns ns0 route add 192.0.2.11/32 dev veth01
In ns1, only packets with TOS 4 can be routed to ns0:
$ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10
Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
is 4:
$ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1)
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0)
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE
... 0% packet loss ...
Now use iptable's rpfilter module in ns1:
$ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP
Not-ECT and ECT(1) packets still pass:
$ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1)
... 0% packet loss ...
But ECT(0) and ECN packets are dropped:
$ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0)
... 100% packet loss ...
$ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE
... 100% packet loss ...
After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.
Fixes: 8f97339d3f ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.
This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).
ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.
Reproducer:
Setup two netns, connected with veth:
$ ip netns add ns0
$ ip netns add ns1
$ ip -netns ns0 link set dev lo up
$ ip -netns ns1 link set dev lo up
$ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
$ ip -netns ns0 link set dev veth01 up
$ ip -netns ns1 link set dev veth10 up
$ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
$ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10
In ns0, add route to multicast address 224.0.2.0/24 using source
address 198.51.100.10:
$ ip -netns ns0 address add 198.51.100.10/32 dev lo
$ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10
In ns1, define route to 198.51.100.10, only for packets with TOS 4:
$ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10
Also activate rp_filter in ns1, so that incoming packets not matching
the above route get dropped:
$ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1
Now try to receive packets on 224.0.2.11:
$ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -
In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
tos 6 for socat):
$ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6
The "test0" message is properly received by socat in ns1, because
early-demux has no cached dst to use, so source address validation
is done by ip_route_input_mc(), which receives a TOS that has the
ECN bits masked.
Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
$ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6
The "test1" message isn't received by socat in ns1, because, now,
early-demux has a cached dst to use and calls ip_mc_validate_source()
immediately, without masking the ECN bits.
Fixes: bc044e8db7 ("udp: perform source validation for mcast early demux")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of queues can change by other means, rather than ethtool. For
example, attaching an mqprio qdisc with num_tc > 1 leads to creating
multiple sets of TX queues, which may be then destroyed when mqprio is
deleted. If an AF_XDP socket is created while mqprio is active,
dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may
decrease with deletion of mqprio, which will mean that the pool won't be
NULLed, and a further increase of the number of TX queues may expose a
dangling pointer.
To avoid any potential misbehavior, this commit clears pool for RX and
TX queues, regardless of real_num_*_queues, still taking into
consideration num_*_queues to avoid overflows.
Fixes: 1c1efc2af1 ("xsk: Create and free buffer pool independently from umem")
Fixes: a41b4f3c58 ("xsk: simplify xdp_clear_umem_at_qid implementation")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
-----BEGIN PGP SIGNATURE-----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=LAMf
-----END PGP SIGNATURE-----
Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block
Pull task_work fix from Jens Axboe:
"The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional
task_work run we had in get_signal().
This caused a regression for some setups, since we're relying on eg
____fput() being run to close and release, for example, a pipe and
wake the other end.
For 5.11, I prefer the simple solution of just reinstating the
unconditional run, even if it conceptually doesn't make much sense -
if you need that kind of guarantee, you should be using TWA_SIGNAL
instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would
ensure that other potential gotchas/assumptions for task_work don't
regress for 5.11.
We're looking into further simplifying the task_work notifications for
5.12 which would resolve that too"
* tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block:
task_work: unconditionally run task_work from get_signal()
I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem()
instead of bpf_map_pop_elem(). In practice it may have been less likely
hit when under JIT given shielded via 84430d4232 ("bpf, verifier: avoid
retpoline for map push/pop/peek operation").
Fixes: f1a2e44a3a ("bpf: add queue and stack maps")
Signed-off-by: Mircea Cirjaliu <mcirjaliu@bitdefender.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com>
Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
- Avoid exposing parent of root directory in NFSv3 READDIRPLUS results
- Fix a tracepoint change that went in the initial 5.11 merge
-----BEGIN PGP SIGNATURE-----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=Qf5O
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Avoid exposing parent of root directory in NFSv3 READDIRPLUS results
- Fix a tracepoint change that went in the initial 5.11 merge
* tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Move the svc_xdr_recvfrom tracepoint again
nfsd4: readdirplus shouldn't return parent of export
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmAGxt0THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjMhCACtIFiJERxNFqKLVn1s+2IyA3+Lv0UI
Suyl+tUTgiN3WzPNAbYfd6cYKk/JvAF0KvCtvuFfRS+oRJrT8+ONBBRxSzpDixGO
aZfvzObOstWUQ0XsP2Q+S4YZlsLHtG76sUSsWCB8wdsnG0hujbrQ43M1Vj15EQYj
EKFmsJfxeMSjekaI7QRkU7LR9gZgacCWthCbn4KFgtXCREA1sI5OUnW9NAei1MSG
M/adfAP4xqoBpNjXq+6M2Ha4H5SmtZRlOQ4bk6ZgebhG0T9LT7UBPqaHHed8CcOj
PzreKfYYYGExhJwLKuCji7r6kSGZcZ6kiIMdFm+vliSK/QJeFCFclhdX
=c3XM
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Dexuan to fix clockevent initialization"
* tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Initialize clockevents after LAPIC is initialized
Geert Uytterhoeven says:
====================
sh_eth: Fix reboot crash
This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth
device is not opened will cause a crash.
Changes compared to v1:
- Export mdiobb_{read,write}(),
- Call mdiobb_{read,write}() now they are exported,
- Use mii_bus.parent to avoid bb_info.dev copy,
- Drop RFC state.
Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers
itself, and use them either manually (through a new parameter to
alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or
automatically (e.g. if pm_runtime_enabled() returns true). Note that
the latter requires a "struct device *" parameter to operate on.
Currently there are only two drivers that call alloc_mdio_bitbang() and
use Runtime PM: the Renesas sh_eth and ravb drivers. This series fixes
the former, while the latter is not affected (it keeps the device
powered all the time between driver probe and driver unbind, and
changing that seems to be non-trivial).
====================
Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wolfram reports that his R-Car H2-based Lager board can no longer be
rebooted in v5.11-rc1, as it crashes with an imprecise external abort.
The issue can be reproduced on other boards (e.g. Koelsch with R-Car
M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is
down at reboot time:
Unhandled fault: imprecise external abort (0x1406) at 0x00000000
pgd = (ptrval)
[00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000
Internal error: : 1406 [#1] ARM
Modules linked in:
CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
PC is at sh_mdio_ctrl+0x44/0x60
LR is at sh_mmd_ctrl+0x20/0x24
...
Backtrace:
[<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24)
r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4
[<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8)
[<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc)
r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001
[<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0)
r7:0000001f r6:00000001 r5:c221e000 r4:c221e000
[<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54)
r7:0000001f r6:00000001 r5:c221e000 r4:c221e458
[<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20)
r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800
[<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80)
[<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50)
r5:c229f800 r4:c229f800
[<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c)
r5:c229f800 r4:c229f804
[<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8)
[<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48)
r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000
[<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60)
[<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208)
r5:4321fedc r4:01234567
[<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c)
r7:00000058 r6:00000000 r5:00000000 r4:00000000
[<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54)
As of commit e2f016cf77 ("net: phy: add a shutdown procedure"),
system reboot calls phy_disable_interrupts() during shutdown. As this
happens unconditionally, the PHY registers may be accessed while the
device is suspended, causing undefined behavior, which may crash the
system.
Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by
wrappers that take care of Runtime PM, to resume the device when needed.
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On x86 scale invariace tends to be disabled during resume from
suspend-to-RAM, because the MPERF or APERF MSR values are not as
expected then due to updates taking place after the platform
firmware has been invoked to complete the suspend transition.
That, of course, is not desirable, especially if the schedutil
scaling governor is in use, because the lack of scale invariance
causes it to be less reliable.
To counter that effect, modify init_freq_invariance() to register
a syscore_ops object for scale invariance with the ->resume callback
pointing to init_counter_refs() which will run on the CPU starting
the resume transition (the other CPUs will be taken care of the
"online" operations taking place later).
Fixes: e2b0d619b4 ("x86, sched: check for counters overflow in frequency invariant accounting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lkml.kernel.org/r/1803209.Mvru99baaF@kreacher
After hibernation, HDA controller can't be runtime-suspended after
commit 215a22ed31 ("ALSA: hda: Refactor codjc PM to use
direct-complete optimization"), which enables direct-complete for HDA
codec.
The HDA codec driver didn't expect direct-complete will be disabled
after it returns a positive value from prepare() callback. However,
there are some places that PM core can disable direct-complete. For
instance, system hibernation or when codec has subordinates like LEDs.
So if the codec is prepared for direct-complete but PM core still calls
codec's suspend or freeze callback, partially revert the commit and take
the original approach, which uses pm_runtime_force_*() helpers to
ensure PM refcount are balanced. Meanwhile, still keep prepare() and
complete() callbacks to enable direct-complete and request a resume for
jack detection, respectively.
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210119152145.346558-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For performance, BO page mappings can stay in place even if the
map counter has returned to 0. In these cases, the existing page
mapping has to be reused by the next vmap operation. Otherwise
a new mapping would be installed and the old mapping's pages leak.
Fix the issue by reusing existing page mappings for vmap operations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1086db71a1 ("drm/vram-helper: Remove invariant parameters from internal kmap function")
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Eli Cohen <elic@nvidia.com>
Reported-by: Eli Cohen <elic@nvidia.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210118144639.27307-1-tzimmermann@suse.de
The bdc pci driver is going to be removed due to it not existing in the
wild. This patch turns off compilation of the driver so that stable
kernels can also pick up the change. This helps the out-of-tree
facetimehd webcam driver as the pci id conflicts with bdc.
Cc: Al Cooper <alcooperx@gmail.com>
Cc: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the
Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made
the IRQ domain hierarchical, so the driver needs to pull in the support
infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig
options.
Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This is the only driver in the kernel source tree that depends on
IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a
visible Kconfig symbol, depending on it (expecting a user to
set/enable it) doesn't make much sense, so change it to select
instead of "depends on".
Fixes: 96868dce64 ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Cc: Thierry Reding <treding@nvidia.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
