Commit Graph

238 Commits

Author SHA1 Message Date
Markus Mayer
fee5f1ef6c memory: brcmstb: dpfe: support new way of passing data from the DCPU
The DCPU can now send message data in two ways:
  - via the data RAM, as before (this is now message type 0)
  - via the message RAM (this is message type 1)

In order to support both methods, we check the message type of the
response (bits 31:28) and then treat the offset (bits 27:0)
accordingly.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23 10:56:59 -08:00
Markus Mayer
9f2c4d95e0 memory: brcmstb: dpfe: fix type declaration of variable "ret"
In some functions, variable "ret" should be ssize_t, so we fix it.

Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23 10:56:31 -08:00
Markus Mayer
69d7d95452 memory: brcmstb: dpfe: properly mask vendor error bits
We were printing the entire 32 bit register rather than just the lower
8 bits. Anything above bit 7 is reserved and may be any random value.

Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23 10:56:07 -08:00
Linus Torvalds
fe53d1443a ARM: SoC driver updates for 4.16
A number of new drivers get added this time, along with many low-priority
 bugfixes. The most interesting changes by subsystem are:
 
 bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC types
   - The TI OMAP sysc driver now supports updated DT bindings
 
 memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there
 
 SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP
 
 reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes
 
 tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with
     the TEE is added
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/
 b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8
 xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy
 /PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I//
 68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa
 5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum
 aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd
 +ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl
 EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h
 zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco
 0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis
 IDVC/QWkb3u85wK20Vc1
 =yz0k
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...
2018-02-01 16:35:31 -08:00
Ladislav Michl
a758f50f10 mtd: onenand: omap2: Configure driver from DT
Move away from platform data configuration and use pure DT approach.

Use generic probe function to deal with OneNAND node and remove now useless
gpmc_probe_onenand_child function. Import sync mode timing calculation
function from mach-omap2/gpmc-onenand.c

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-12 16:41:15 +01:00
Olof Johansson
11077e9bf7 SOC: Keystone Soc driver updates for 4.16
- TI EMIF-SRAM driver
  - TI SCI print format fix
  - Navigator strndup lenth fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaRE65AAoJEHJsHOdBp5c/BOQP/1tvzmfQ2nllYiAJBN35e/PO
 0qQE2rrFhPgoSx1e5+6gvuGhdekBvuqE68ejbswSYttfseOOOGpdh7s15M+sieQv
 fkZd7XJQMfBamJv+C5zZYe/qBNtfa8WFvAdSndpDYIaxSMsE5lzqbQPQga0/G2YW
 uYLc/iEFqh5uKVLl/KmVHGZ9sZ8kXZF8gGyLuzkgpqjuaJZZKygEi5agzq6EJhQK
 09BEqQiesUWLxcYLjbao3EPmLmCWzsCyTbpEHBkRYtiRgsn7iccdLjQ8VSWfvb1n
 md3/FprPA7EuLdlYwuHQxsBNsm93WAPzLnubS1UKsenUEcbE36W4bJZgwbYHuaOT
 oHGeoAdTM1VWrjQ3Lty+Nn8hhCexrn72nVAxwnyt54CEdirxdSikrYOjq5jhf50z
 xP5eQp7J/GhX9b6xUHB25PnlxmRx2jIb1MAD5wHlND/Khw0kpph7mRuTUWtmnTOB
 w+qJfPpb+WkYep/8TkplyX86XB0eFghO9wPhOjc4lMmPdpsXlrdca78I+4YI6cv3
 dvIRZwI4knwKQo6bqJ1lizCOaGHFxZLPylSLDplVatZFP6f1FuEHQ9GcxE2ErygP
 A5j+JRIJVedwW1ZJWMe3TPRAOnGrsWzuVUcBCYGURUYhGWrU6VMNGTc4nVducor+
 Ukoyta0/V6rsBZCEBuP9
 =hKyd
 -----END PGP SIGNATURE-----

Merge tag 'keystone_driver_soc_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

SOC: Keystone Soc driver updates for 4.16

 - TI EMIF-SRAM driver
 - TI SCI print format fix
 - Navigator strndup lenth fix

* tag 'keystone_driver_soc_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  soc: ti: fix max dup length for kstrndup
  firmware: ti_sci: Use %zu for size_t print format
  memory: ti-emif-sram: remove unused variable
  memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  Documentation: dt: Update ti,emif bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-04 23:12:57 -08:00
Arnd Bergmann
62bf8ae896 memory: tegra: Changes for v4.16-rc1
The Tegra memory controller driver will now instruct the SMMU driver to
 create groups, which will make it easier for device drivers to share an
 IOMMU domain between multiple devices.
 
 Initial Tegra186 support is also added in a separate driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlo6tlMTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoR7MEACpoyPkV5fGz3z8rdsYaVZSA+upYEHw
 CC4v5XslNCucmk57XIYTbAZRu7W5MuzP3hq+DoYM5B5EHxgt1a2YHNtjjg3eLx1T
 U+8hjoOPOYu7FBVmUf4V6Buvmws90DxtfvqcfIScJJEAPgKsT/wfGXNstc88kDnO
 c+huQxk5QZsyGBgt1sS61zlymaLpDlSoE6kScXnjM1K6XtUdZ+8zmoMdZ7Ka8DUv
 kwBoYXgUpVminWpSrfuV7f3/8BtTSJ/b2rUPz7Ren0JJTFrhIi/ckeQ5YhTa46Dn
 oqR0f6MuLRGADT+E5DfoF7otvE2Fvq0Uq/YlypIf9gtiit5mhPM7ZXb3LOwDGiCp
 0mwljW9Uov7ZpFnb8b9SlVf1b+zDeeLxtARq4qzgky5OkWZp4hXZw+Os3ebXQYW3
 d/MUfwdqgNKOccGRsRkk9OEdUiFGpGtInb0xM9OWBCHvdrXhbK9llZ3wnrE+M3SY
 BELM+94YorqVPx5JTmiM7kTozVwpkvZQG6kU2J81Y55FI1ELQF7Mk0yzFs562tG5
 2abc07xkSUCdC6zsrgNOy+AtuRH8oHccUfZRACLUhzHNCrvfr3MrEcEv8l4VRJp4
 ZLfR8UjmtTI8YllBKdSdUtFB4nN5oyoIPCNsgwzXcTnKV5SzAyA/KuDW6IWoNU1L
 6ekAxpeiHVnLKA==
 =ncAl
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "memory: tegra: Changes for v4.16-rc1" from Thierry Reding:

The Tegra memory controller driver will now instruct the SMMU driver to
create groups, which will make it easier for device drivers to share an
IOMMU domain between multiple devices.

Initial Tegra186 support is also added in a separate driver.

* tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get()
  iommu/tegra: Allow devices to be grouped
  memory: tegra: Create SMMU display groups
  memory: tegra: Add Tegra186 support
  dt-bindings: memory: Add Tegra186 support
  dt-bindings: misc: Add Tegra186 MISC registers bindings
2017-12-21 18:05:04 +01:00
Thierry Reding
2a8102dfe0 memory: tegra: Create SMMU display groups
Create SMMU display groups for Tegra30, Tegra114, Tegra124 and Tegra210.
This allows the display controllers on these devices to share the same
IOMMU domain using the standard IOMMU group mechanism.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-15 10:12:32 +01:00
Thierry Reding
02b0cc52c0 memory: tegra: Add Tegra186 support
The memory controller found on Tegra186 is different in some respects to
its predecessors. Most notably it no longer implements an SMMU, but does
assign ARM SMMU stream IDs for each memory client instead.

Provide a driver that programs these registers so that memory clients
can translate addresses via the ARM SMMU.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13 12:58:21 +01:00
Arnd Bergmann
84a1695a6f memory: ti-emif-sram: remove unused variable
The newly introduced driver causes a harmless warning for a variable
that was evidently never used:

drivers/memory/ti-emif-pm.c: In function 'ti_emif_remove':
drivers/memory/ti-emif-pm.c:303:17: error: unused variable 'dev' [-Werror=unused-variable]

Fixes: 8428e5ad75 ("memory: ti-emif-sram: introduce relocatable suspend/resume handlers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-06 09:50:20 -08:00
Dave Gerlach
8428e5ad75 memory: ti-emif-sram: introduce relocatable suspend/resume handlers
Certain SoCs like Texas Instruments AM335x and AM437x require parts
of the EMIF PM code to run late in the suspend sequence from SRAM,
such as saving and restoring the EMIF context and placing the memory
into self-refresh.

One requirement for these SoCs to suspend and enter its lowest power
mode, called DeepSleep0, is that the PER power domain must be shut off.
Because the EMIF (DDR Controller) resides within this power domain, it
will lose context during a suspend operation, so we must save it so we
can restore once we resume. However, we cannot execute this code from
external memory, as it is not available at this point, so the code must
be executed late in the suspend path from SRAM.

This patch introduces a ti-emif-sram driver that includes several
functions written in ARM ASM that are relocatable so the PM SRAM
code can use them. It also allocates a region of writable SRAM to
be used by the code running in the executable region of SRAM to save
and restore the EMIF context. It can export a table containing the
absolute addresses of the available PM functions so that other SRAM
code can branch to them. This code is required for suspend/resume on
AM335x and AM437x to work.

In addition to this, to be able to share data structures between C and
the ti-emif-sram-pm assembly code, we can automatically generate all of
the C struct member offsets and sizes as macros by processing
emif-asm-offsets.c into assembly code and then extracting the relevant
data as is done for the generated platform asm-offsets.h files.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-02 19:27:17 -08:00
Ladislav Michl
c18a7ac339 memory: omap-gpmc: Make 'bank-width' property optional
Error out only if both 'bank-width' and 'gpmc,device-width' are missing.
As 'bank-width' is mostly used for NOR devices and all other devices must
use 'gpmc,device-width' update the error message accordingly.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
2017-12-01 15:37:49 +02:00
Linus Torvalds
cf9b0772f2 ARM: SoC driver updates for v4.15
This branch contains platform-related driver updates for ARM and ARM64,
 these are the areas that bring the changes:
 
 New drivers:
  - Driver support for Renesas R-Car V3M (R8A77970)
  - Power management support for Amlogic GX
  - A new driver for the Tegra BPMP thermal sensor
  - A new bus driver for Technologic Systems NBUS
 
 Changes for subsystems that prefer to merge through arm-soc:
  - The usual updates for reset controller drivers from Philipp Zabel,
    with five added drivers for SoCs in the arc, meson, socfpa, uniphier
    and mediatek families.
  - Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
    Heiner Kallweit and Lorenzo Pieralisi.
 
 Changes specific to some ARM-based SoC
  - The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
    on ARM as well.
  - Several changes for power management on Broadcom SoCs
  - Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
  - Minor Cleanups for Samsung, TI OMAP SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDggbAAoJEGCrR//JCVInIeQQAN1MDyO1UaWiFYnbkVOgzFcj
 dqbFOc41DBE/90JoBWE8kR/rjyF83OqztiaYpx9viu2qMMBZVcOwxhCUthWK59c/
 IujYdw4zGevLscF+jdrLbXgk97nfaWebsHyTAF307WAdZVJxiVGGzQEcgm71d6Zp
 CXjLiUii4winHUMK9FLRY2st0HKAevXhuvZJVV432+sTg3p7fGVilYeGOL5G62WO
 zQfCisqzC5q677kGGyUlPRGlHWMPkllsTTnfXcmV/FUiGyVa3lUWY5sEu+wCl96O
 U1ffPENeNj/A/4fa1dbErtbiNnC2z/+jf+Dg7Cn8w/dPk4Suf0ppjP8RqIGyxmDl
 Wm/UxbwDClxaeF4GSaYh2yKgGRJMH5N87bJnZRINE5ccGiol8Ww/34bFG0xNnfyh
 jSAFAc318AFG62WD4lvqWc7LSpzOYxp/MNqIFXKN692St/MJLkx8/q0nTwY1qPY0
 3SELz9II3hz+3MfDRqtRi7hZpkgHgQ+UG7S5+Xhmqrl309GOEldCjPVJhhXxWoxK
 ZPtZOuyYvGhIC+YAnHaN6lUjADIdNJZHwbuXFImx85oKHVofoxHbcni5vk8Uu7z1
 sQNYOtdDGaPG/2u9RJdJlPg/jIgLKxxt/Xm9TYVawpZ5hFANhBTtIq5ExCRAil68
 j9sMOrpZ1DzCQyR7zN2v
 =qDhq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This branch contains platform-related driver updates for ARM and
  ARM64, these are the areas that bring the changes:

  New drivers:

   - driver support for Renesas R-Car V3M (R8A77970)

   - power management support for Amlogic GX

   - a new driver for the Tegra BPMP thermal sensor

   - a new bus driver for Technologic Systems NBUS

  Changes for subsystems that prefer to merge through arm-soc:

   - the usual updates for reset controller drivers from Philipp Zabel,
     with five added drivers for SoCs in the arc, meson, socfpa,
     uniphier and mediatek families

   - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
     Heiner Kallweit and Lorenzo Pieralisi

  Changes specific to some ARM-based SoC

   - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
     ARM as well

   - several changes for power management on Broadcom SoCs

   - various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
     Mediatek

   - minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
  because the R8A77970 driver is missing a header file that came from
  that pull.

  The fact that this got merged afterwards only fixes it at this point,
  and bisection of that driver will fail if/when you walk into the
  history of that driver.           - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
  soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
  bus: add driver for the Technologic Systems NBUS
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
  soc: qcom: remove unused label
  soc: amlogic: gx pm domain: add PM and OF dependencies
  drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  ..
2017-11-16 16:05:01 -08:00
Arnd Bergmann
ad54c3e75d OMAP-GPMC: driver updates for v4.15, part 2
* get rid of unused function gpmc_update_nand_reg().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ/GqwAAoJENJaa9O+djCTnMwP/3pJrB8jKAd61grL2P60PWYo
 zWhKacCgq2NyU6QeaNpLYf4msaF2krKnvhfe4zEWpwAQugLwS6XkF0wCDyfRxKE/
 8A2rOyeCWSumD6ryFshBe1bg3xCxe0y7bOZqq6bo75Vgz5RwICZIsyre59b2RzMI
 imCck115FxmGrE0GHPlPmosjzTcEeMqiNkb0xzf+nsFiDaEIa6Y6UEd7A+x133w8
 t9uvVlwIz3i1ghiDRMOWKE+M5WM+/HVVlSlT2DxS86wpIqqExbxcsBGqKrSidooC
 8LNEDRwMIUR/v19fzFzaQ1I66pmhXR+zWEnU1H3XbGxQfT9uvQPfEYNvqi10TDgl
 YlPyfpKBTSfJSMhZZ3/XbJ9u2Sr3dAsG77tMIDW3U1g9MaGeJXjNI8c89xy41jpy
 C/31tawGlYKAn68lKSR53+aWbFAQNpE6ffPwSMdfvuY5qwAZnecE1pQc+vUxiFSQ
 J+Rauj431jVu1D8bLYvq/nb7sqQaeW81qvqtk3qDAU9fatdiyDKLQ48JzxyCnZz5
 4IX9q7hZH83dJNptPam4Ol2SMIypC0ppFmWiGamNdddDr40E3mjGeIut+iC4UHRb
 Oj5mzLL6eMiITlpSjve0FxhE0dhxyfHIiQ7Fz9iTfSUkJdyfyh1SwTPzojLuNMAs
 3RcB124dpea3gZ1QF7sd
 =qq+j
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-for-v4.15-pt2' of https://github.com/rogerq/linux into next/drivers

Pull "OMAP-GPMC: driver updates for v4.15, part 2" from Roger Quadros:

* get rid of unused function gpmc_update_nand_reg().

* tag 'gpmc-omap-for-v4.15-pt2' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
2017-11-07 16:31:01 +01:00
Ladislav Michl
a622c64166 memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
Deprecated gpmc_update_nand_reg() is no longer used, remove.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
2017-11-03 15:06:11 +02:00
Arnd Bergmann
3330becb47 This pull request contains Broadcom ARM/ARM64/MIPS SoCs changes for 4.15
(second part), please pull the following:
 
 - Markus updates the Broadcom STB DPFE driver to avoid loading the firmware when
   unnecessary to accomodate for specific platform restrictions
 
 - Florian adds support for the Broadcom Hurricane 2 SoC iProc PLL clock needed
   to get the proper CPU clock frequency
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZ6o4yAAoJEIfQlpxEBwcEs3MQAJ9bBFsnLu3hNFM7WNuXgVDS
 z4/BYsVUhPzwz2lLB/OMsKU8xkGd/d7DcPvziMpvgWzTXoVEboXWtN5S2ReiVYja
 Pyl0UMTmT6Jo1z+8WQkWJROUYmaLQzVHr/J3q15FItNS6gvsxntiDYUVLHtIe+g2
 3IOTDSVSptPoYYxWi3PiBsXfjb+ja/ob01K8cQh+3AcjopRTE9F7l9EXhUJWOJ9Y
 21eCyCiPVdjFKfV2etby4XcTqV1LrvJEhmpaRBsn+jitvWYdaMb4+jwUv58nf7SF
 JaSBAjSRZ29FoVpUryHk9/yBt5NBv2WyAyizMG95JXeOnd2QDTi5RltxiG20kvBf
 Q9pm8w0FvAM+RmKE/eFHXil7jJOczuSoen+vOXbvvxaBP6vSVGkrGt/aEMvUCr2a
 Z+/fogKTIehQZhfrrkw1t5vLcmTGPYidggFPxED22juPpy9weVKqMiU02n6F7LpC
 NsyCtmooXVB+KBcMX71G7ywO9y5bz3Tqmn6nYrjf6Lyz7WoDPn1FlDxlvNfUi4uy
 6rhmvwG1b4BT5ksZzu99I9uNhlVNQ1QxHetkpeHgQ/GWYGzCSYqewIdrooEhItyZ
 zibeLlUPJVIu338MYPjoUa2VSGwD2uy1b//wQW+qnA+fSDWw/v7vLW3/svo7D6Ov
 C8dNRSRXXyeZmpfejFPW
 =ecY1
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.15/drivers-part2' of http://github.com/Broadcom/stblinux into next/drivers

Pull "Broadcom drivers changes for 4.15 (part 2)" from Florian Fainelli:

This pull request contains Broadcom ARM/ARM64/MIPS SoCs changes for 4.15
(second part), please pull the following:

- Markus updates the Broadcom STB DPFE driver to avoid loading the firmware when
  unnecessary to accomodate for specific platform restrictions

- Florian adds support for the Broadcom Hurricane 2 SoC iProc PLL clock needed
  to get the proper CPU clock frequency

* tag 'arm-soc/for-4.15/drivers-part2' of http://github.com/Broadcom/stblinux:
  clk: bcm: Add Broadcom Hurricane 2 clock support
  memory: brcmstb: dpfe: skip downloading firmware when possible
  memory: brcmstb: dpfe: introduce is_dcpu_enabled()
2017-11-02 16:21:03 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Arnd Bergmann
d5bd8507cf OMAP-GPMC: driver updates for v4.15
* get rid of unused field in platform data structure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ5e7QAAoJENJaa9O+djCTzQoQALVUigXfVEgCsQQCItSyKHIg
 st8MZgrwiyz+IjXpg5zhVSL8gYEB2WAEObXxdIGyJPuHURjJpHcgxDpU/TNKU9WK
 Nf3enS+Hgk7SS+vuOHzyVAPsm7X/mc5cUgXdZXeaHc1+Y/pL9l5A6JJcru+oak8v
 ikqHBxd4eBEq7DKFkpD/SP/j1o3P6fEzex6ZkX8WW/zboUNtzUIuoSd6kOwaJChc
 SMuXbiipFOL1eZnJoaT5id0yCc8l6TYSSVhc42QoqD8F57mpuIZeVzymJtpe0UQi
 boWNCTLKRoGADTATzXOJ/pDO6Q0d72XakL1iPeqG1/IhaoQVo5PDhpNfJncNu1H+
 IbP0vq/BR3IlBjmc9i80DNqbC1toUDrlm5zHCK5YrgnDe2g8fqMT+KkIe99kPogI
 sav61x1mELwUFPfyJ6nzLWmBoTxc5POIgCkumT16+0Cho4xE760Sa9GjjvTqZGr8
 7G1hSXYdVqsFt2/JG5BMTGWmF5rsqBzJbVdCwKlI3F9IKbw+cebDe37lwOBqeVu8
 Cx8Sl+rsjkPFnBHclaKVWItC+MYoM+nhQolhcuQA1dGpdDzqdJ77UfsGEFBmUQh0
 PDV32yLEkxL+YbogJ2DT6eiTA+SLn8XQIY9w6FIqjzQa7IyjHR7n7tEBaEJkHbBh
 kU+lCW+AamzV5KWlLehM
 =ii3q
 -----END PGP SIGNATURE-----

Merge tag 'gpmc-omap-for-v4.15' of https://github.com/rogerq/linux into next/drivers

Pull "OMAP-GPMC: driver updates for v4.15" from Roger Quadros:
* get rid of unused field in platform data structure.

* tag 'gpmc-omap-for-v4.15' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Drop gpmc_status
2017-10-20 22:36:23 +02:00
Ladislav Michl
0d96a4f6a0 memory: omap-gpmc: Drop gpmc_status
This field is no longer used, drop it.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
2017-10-17 14:46:37 +03:00
Markus Mayer
a56d339e8c memory: brcmstb: dpfe: skip downloading firmware when possible
We want to skip downloading the DPFE firmware from Linux if it was
already downloaded by the boot loader.

The driver now checks if the DCPU is already running and, if so,
whether it can process commands. If the DCPU processes commands
successfully, the driver skips the firmware download step.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-06 16:19:14 -07:00
Markus Mayer
d56e746f4b memory: brcmstb: dpfe: introduce is_dcpu_enabled()
In order to check whether or not the DCPU is running, we introduce
a function called is_dcpu_enabled().

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-06 16:18:46 -07:00
Markus Mayer
2f330caff5 memory: brcmstb: Add driver for DPFE
This driver allows access to DRAM properties, such as the refresh rate,
via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be
used as indirect indicator of the DRAM temperature.

The driver also allows setting of the sampling interval.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-18 11:59:39 -07:00
Linus Torvalds
ae46654bcf ARM: SoC driver updates for v4.14
This branch contains platform-related driver updates for ARM and ARM64.
 
 Among them:
 
  - Reset driver updates:
   + New API for dealing with arrays of resets
   + Make unimplemented {de,}assert return success on shared resets
   + MSDKv1 driver
   + Removal of obsolete Gemini reset driver
   + Misc updates for sunxi and Uniphier
 
  - SoC drivers:
   + Platform SoC driver registration on Tegra
   + Shuffle of Qualcomm drivers into a submenu
   + Allwinner A64 support for SRAM
   + Renesas R-Car R3 support
   + Power domains for Rockchip RK3366
 
  - Misc updates and smaller fixes for TEE and memory driver subsystems
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdt7AAoJEIwa5zzehBx3EboP/jR2T9lrMavXR1zL48L14yJb
 S+fiJlrX1Kr42UF4PQvsfs+uTqOLmycrPVFkMb6IwoUPzQ9UCOSoiMzYm2b7ZPvt
 uIesHhdM3/xun6wKfieN8GmNA1yDVynTxo0TTYDw5ha7I6s2GHgw0GSFzy3wm0Qg
 KzerAO3gzf3L5XsKR0cai3IXNjHO9ubpFG1ReR09da28nPElP8ggWg0KnqdO76Ch
 BGpFj78EC875ZNqwHgnspUqgGDJnBjig3m/uA4FWA0G9Jl38tCyKTZfUR7cEraoV
 kyCgBlR/UrI8eXVTyEy5k5iTsQ3A1VhX4rGjyH+5NZHTs1yWr4+RDND/qeGl9tSo
 VASuOtH6Rc3vdUDpHPBNAFNQH8fwwDoKf96dvN1tiffsx6LSKb//NyOfkXzKOtR6
 CP5raYfX4YktLtHq0XVTZ/6r3XmLcTHzElR/dCFpQOFcTOYii0pWtfcWouahbZ1w
 dhoBX/dbNq37MfzrxtHN2VTIEHpn2GU7u+ZGkp2ArokD58BAft/M3Xee1cDnF75g
 ZDwe5eNFT8aBZKaY7zwG8cdxiw9kACAivDRwW+zgpfUr39c+d0+QmVfnfJh4EGXK
 Ri6yr2EfBWK6jw3cwkdSyyt7iSzIkB+RiuuD1MjpYhWzAvoDpzqkXYukFGbpXnuy
 vUFHNuP1ocUsRtCs8mm1
 =yBzS
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "This branch contains platform-related driver updates for ARM and ARM64.

  Among them:

   - Reset driver updates:
     + New API for dealing with arrays of resets
     + Make unimplemented {de,}assert return success on shared resets
     + MSDKv1 driver
     + Removal of obsolete Gemini reset driver
     + Misc updates for sunxi and Uniphier

   - SoC drivers:
     + Platform SoC driver registration on Tegra
     + Shuffle of Qualcomm drivers into a submenu
     + Allwinner A64 support for SRAM
     + Renesas R-Car R3 support
     + Power domains for Rockchip RK3366

   - Misc updates and smaller fixes for TEE and memory driver
     subsystems"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
  soc/tegra: fuse: Add missing semi-colon
  soc/tegra: Restrict SoC device registration to Tegra
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
  soc/tegra: Register SoC device
  firmware: tegra: set drvdata earlier
  memory: Convert to using %pOF instead of full_name
  soc: Convert to using %pOF instead of full_name
  bus: Convert to using %pOF instead of full_name
  firmware: Convert to using %pOF instead of full_name
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  ...
2017-09-10 20:40:00 -07:00
Linus Torvalds
4dfc278803 IOMMU Updates for Linux v4.14
Slightly more changes than usual this time:
 
 	- KDump Kernel IOMMU take-over code for AMD IOMMU. The code now
 	  tries to preserve the mappings of the kernel so that master
 	  aborts for devices are avoided. Master aborts cause some
 	  devices to fail in the kdump kernel, so this code makes the
 	  dump more likely to succeed when AMD IOMMU is enabled.
 
 	- Common flush queue implementation for IOVA code users. The
 	  code is still optional, but AMD and Intel IOMMU drivers had
 	  their own implementation which is now unified.
 
 	- Finish support for iommu-groups. All drivers implement this
 	  feature now so that IOMMU core code can rely on it.
 
 	- Finish support for 'struct iommu_device' in iommu drivers. All
 	  drivers now use the interface.
 
 	- New functions in the IOMMU-API for explicit IO/TLB flushing.
 	  This will help to reduce the number of IO/TLB flushes when
 	  IOMMU drivers support this interface.
 
 	- Support for mt2712 in the Mediatek IOMMU driver
 
 	- New IOMMU driver for QCOM hardware
 
 	- System PM support for ARM-SMMU
 
 	- Shutdown method for ARM-SMMU-v3
 
 	- Some constification patches
 
 	- Various other small improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZtCFNAAoJECvwRC2XARrjZnQP/AxC/ezQpq82HbegF4sM/cVE
 Ep7TeTqodEl75FS/6txe2wU0pwodqk/LB9ajfQZUbE1w8vKsNEqi5qf4ZYHGoxYI
 5bWyjJBzKIlwENH5lsBpQNt6XLevrYmRsFy7F0tRYy+qPQq8k+js2i7/XkCL3q7L
 3xklF847RRoITaTOhhaROx1pF23dSMEsS2XGuWHcZfjORtep4wcFKzd/2SvlCWCo
 P2bRU7jBzfJuuGSA80gaiUbDmrULTUfYuZNp7njASzCgsDmagERtvDEpdoXPNNSp
 u6s4LjU1Dp3fgr6g6cFRO7B6JUbWd619nwo9so/c/wZN54yEngBF9EyeeF3mv2O5
 ZbM2mOW3RlZcjxFT/AC8G4cZwwP6MpCEQOdqknoqc6ZQwcDqwN0o9I4+po0wsiAU
 89ijZZe9Mx0p9lNpihaBEB1erAUWPo5Obh62zo80W3h6x9WzkGQWM+PyFK2DYoaC
 8biEZzcc21sLEHvXQkcEGJSKrihHr9sluOqvxmCw5QAkYIFAeZRoeH7JtZWjVCnr
 T3XvaG1G1Aw6tS7ErxufdKawREAGki0Rm9i1baiH9sqNj5rllM01Y+PgU6E21Nbg
 iZp9gJLjfwM4vhYLlovvQK5PRoOBsCkyCpEI4GJqjLeam5p/WN06CFFf0ifQofYr
 qDPCVDkWHWV8nugFFKE7
 =EVh9
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Slightly more changes than usual this time:

   - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries
     to preserve the mappings of the kernel so that master aborts for
     devices are avoided. Master aborts cause some devices to fail in
     the kdump kernel, so this code makes the dump more likely to
     succeed when AMD IOMMU is enabled.

   - common flush queue implementation for IOVA code users. The code is
     still optional, but AMD and Intel IOMMU drivers had their own
     implementation which is now unified.

   - finish support for iommu-groups. All drivers implement this feature
     now so that IOMMU core code can rely on it.

   - finish support for 'struct iommu_device' in iommu drivers. All
     drivers now use the interface.

   - new functions in the IOMMU-API for explicit IO/TLB flushing. This
     will help to reduce the number of IO/TLB flushes when IOMMU drivers
     support this interface.

   - support for mt2712 in the Mediatek IOMMU driver

   - new IOMMU driver for QCOM hardware

   - system PM support for ARM-SMMU

   - shutdown method for ARM-SMMU-v3

   - some constification patches

   - various other small improvements and fixes"

* tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/vt-d: Don't be too aggressive when clearing one context entry
  iommu: Introduce Interface for IOMMU TLB Flushing
  iommu/s390: Constify iommu_ops
  iommu/vt-d: Avoid calling virt_to_phys() on null pointer
  iommu/vt-d: IOMMU Page Request needs to check if address is canonical.
  arm/tegra: Call bus_set_iommu() after iommu_device_register()
  iommu/exynos: Constify iommu_ops
  iommu/ipmmu-vmsa: Make ipmmu_gather_ops const
  iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable
  iommu/amd: Rename a few flush functions
  iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY
  iommu/mediatek: Fix a build warning of BIT(32) in ARM
  iommu/mediatek: Fix a build fail of m4u_type
  iommu: qcom: annotate PM functions as __maybe_unused
  iommu/pamu: Fix PAMU boot crash
  memory: mtk-smi: Degrade SMI init to module_init
  iommu/mediatek: Enlarge the validate PA range for 4GB mode
  iommu/mediatek: Disable iommu clock when system suspend
  iommu/mediatek: Move pgtable allocation into domain_alloc
  iommu/mediatek: Merge 2 M4U HWs into one iommu domain
  ...
2017-09-09 15:03:24 -07:00
Ludovic Desroches
b0f3ab20e7 mfd: syscon: atmel-smc: Add helper to retrieve register layout
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.

Fixes: fe9d7cb22e ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:01 +01:00
Joerg Roedel
47b59d8e40 Merge branches 'arm/exynos', 'arm/renesas', 'arm/rockchip', 'arm/omap', 'arm/mediatek', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next 2017-09-01 11:31:42 +02:00
Yong Wu
4f608d382e memory: mtk-smi: Degrade SMI init to module_init
The initialization of MediaTek power manager(SCPSYS) is
builtin_platform_driver, and SMI must depend on power-domain.
Thus, currently subsys_initcall for SMI is unnecessary, SMI will be
always probe defered by power-domain. Degrade it to module_init.

In addition, there are two small changes about the probe sequence:
1) Delete this two lines.
    	if (!dev->pm_domain)
		return -EPROBE_DEFER;
   This is not helpful. the platform driver framework guarantee this.
   The "dev_pm_domain_attach" in the "platform_drv_probe" will return
   EPROBE_DEFER if its powerdomain is not ready.

2) Add the probe-defer for the smi-larb device should waiting for
   smi-common.
   In mt2712, there are 2 smi-commons, 10 smi-larbs. All will be
   probe-defered by the power-domain, there is seldom case that
   smi-larb probe done before smi-common. then it will hang like
   this:

   Unable to handle kernel NULL pointer dereference at virtual address
00000000 pgd = ffffff800a4e0000
[00000000] *pgd=00000000beffe003[   17.610026] , *pud=00000000beffe003
...
[<ffffff800897fe04>] mtk_smi_enable+0x1c/0xd0
[<ffffff800897fee8>] mtk_smi_larb_get+0x30/0x98
[<ffffff80088edfa8>] mtk_mipicsi0_resume+0x38/0x1b8
[<ffffff8008634f44>] pm_generic_runtime_resume+0x3c/0x58
[<ffffff8008644ff8>] __genpd_runtime_resume+0x38/0x98
[<ffffff8008647434>] genpd_runtime_resume+0x164/0x220
[<ffffff80086372f8>] __rpm_callback+0x78/0xa0
[<ffffff8008637358>] rpm_callback+0x38/0xa0
[<ffffff8008638a4c>] rpm_resume+0x4a4/0x6f8
[<ffffff8008638d04>] __pm_runtime_resume+0x64/0xa0
[<ffffff80088ed05c>] mtk_mipicsi0_probe+0x40c/0xb70
[<ffffff800862cdc0>] platform_drv_probe+0x58/0xc0
[<ffffff800862a514>] driver_probe_device+0x284/0x438
[<ffffff800862a8ac>] __device_attach_driver+0xb4/0x160
[<ffffff8008627d58>] bus_for_each_drv+0x68/0xa8
[<ffffff800862a0a4>] __device_attach+0xd4/0x168
[<ffffff800862a9d4>] device_initial_probe+0x24/0x30
[<ffffff80086291d8>] bus_probe_device+0xa0/0xa8
[<ffffff8008629784>] deferred_probe_work_func+0x94/0xf0
[<ffffff80080f03a8>] process_one_work+0x1d8/0x6e0

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-22 16:38:00 +02:00
Yong Wu
e6dec92308 iommu/mediatek: Add mt2712 IOMMU support
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.

The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.

Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-22 16:37:58 +02:00
Rob Herring
db749d17cb memory: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-16 21:37:00 +02:00
Arvind Yadav
46cc815d6d memory: mtk-smi: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-15 17:46:23 +02:00
Honghui Zhang
363932cdef memory: mtk-smi: add larbid handle routine
In the commit 3c8f4ad85c ("memory/mediatek: add support for mt2701"),
the larb->larbid was added but not initialized.
Mediatek's gen1 smi need this hardware larbid information to get the
register offset which controls whether enable iommu for this larb.
This patch add the initialize routine for larbid.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-04 12:04:58 +02:00
Honghui Zhang
75487860a8 memory: mtk-smi: Use of_device_get_match_data helper
Replace custom code with generic helper to retrieve driver data.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-04 12:04:57 +02:00
Alexander Dahl
3fb3b3c4b6 memory: atmel-ebi: Fix smc cycle xlate converter
The converter function for translating ns timings in register values was
initialized with a wrong function pointer. This resulted in wrong
register values also for the setup and pulse registers when configuring
the EBI interface trough dts.

Includes a small fix in a comment of the smc driver, which was probably
just a copy'n'paste mistake.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26 22:37:54 +02:00
Alexander Dahl
1f6b53901f memory: atmel-ebi: Allow t_DF timings of zero ns
As reported in [1] and in [2] it's not possible to set the device tree
property 'atmel,smc-tdf-ns' to zero, although the SoC allows a setting
of 0ns for the t_DF time.

Allow this setting by doing the same thing as in the atmel nand
controller driver by setting ncycles to ATMEL_SMC_MODE_TDF_MIN if zero
is set in the dts.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/490966.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-July/520652.html

Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26 22:37:46 +02:00
Alexander Dahl
bc9b934b2f memory: atmel-ebi: Fix smc timing return value evaluation
Setting optional EBI/SMC properties through device tree always fails due
to wrong evaluation of the return value of
atmel_ebi_xslate_smc_timings().

If you put some of those properties in your dts file, but not
'atmel,smc-tdf-ns' the local variable 'required' in
atmel_ebi_xslate_smc_timings() stays on 'false' after the first 'if'
block. This leads to setting 'ret' to -EINVAL in the first run of the
following 'for' loop which is then the return value of this function.

However if you set 'atmel,smc-tdf-ns' in the dts file and everything in
atmel_ebi_xslate_smc_timings() works well, it returns the content of
'required' which is 'true' then.

So the function atmel_ebi_xslate_smc_timings() always returns non-zero
which lets its call in atmel_ebi_xslate_smc_config() always fail and
thus returning -EINVAL, so the EBI configuration for this node fails.

Judging from the following code evaluating the local 'required' variable
in atmel_ebi_xslate_smc_config() and the call of caps->xlate_config in
atmel_ebi_dev_setup() it's probably right to only let the call fail if a
negative error code is returned.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26 22:37:30 +02:00
Linus Torvalds
e854711291 ARM: SoC driver updates
- New SoC specific drivers
   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware
   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).
 
 - Reset subsystem, merged through arm-soc by tradition:
   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs
   - Various subsystem-wide cleanups
 
 - Updates for existing SoC-specific drivers
   - TI GPMC (General Purpose Memory Controller)
   - Mediatek "scpsys" system controller support for MT6797
   - Broadcom "brcmstb_gisb" bus arbitrer
   - ARM SCPI firmware
   - Renesas "SYSC" system controller
 
 One more driver update was submitted for the Freescale/NXP DPAA
 data path acceleration that has previously been used on PowerPC
 chips. I ended up postponing the merge until some API questions
 for its unusual MMIO access are resolved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpDFmCrR//JCVInAQKoihAAosgC3+3IHppOhHid+HepkOcp2teyKknw
 42fSXVpTdfWa8Oe7q80Kzmz2CPNfFq2SzHz6oXb9WCcDFqSGr0b9aSE7NnksRjTf
 2euHVJ4MnJpkRewvorRmcpK8dPXDcHwEw/8hU3yZtJUGI0IKtlrqXis+evgkz9cn
 YDynuVdAZgZiEfiNeSeadyNLcxaQCc3x9ovvsBXxBa1/x1pfeRnTbp+6hiHilCJu
 Szts/yAzZzZE9Jkf9dLKfNlsT6m2SgtjukqqOR+zHAhi7/BdTFSVUP6L8u7QjrR+
 +ijTICg8FMJGiWLAOe6ED2qZVByN92EJ2AGwriYlSles9ouoGfRkJ2rwxyjbete7
 avy0HP+PSBFXWdwbOcq8HX8CrbuBltagl5fkMokct6biWLLMshNZ33WWdQ6/DsM2
 b9mAAZuhbs0g1qWUBD3+q6qBytSuGme6Px6fMoVEc4GQ2YVFUQOoEfZOGKRv1U1o
 aMWGt/6qeF8SG288rYAnQ/TuYWpOLtksV6yhotA00HUHhkTCy0xVCdyWGZtNyKhG
 o/x4YnhWFzHsXmqKcR1sM7LzfZY/WNmbrOLvK6i83Z0P7QptqrdaLAylL3iSPEyX
 ZDUgExf6PYXkWIewc3KwC5sJjuD05z3ZCgIR+mCezwbuD+3Z2fOdjodY/VBZ74hq
 URcM/BqtuWE=
 =5L6n
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...
2017-07-04 14:47:47 -07:00
Olof Johansson
cd8eb6291d Few improvments for GPMC (General Purpose Memory Controller)
found on TI SoCs to produce an error for missing bank-width
 and to make the bootloader timing debug output usable for
 device tree timings.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlk37z4RHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMnnQ//Q9/U0t9XRtdEh1AxwTkApu4iYg4+uoxD
 kGNtVXsqv24O/WpPOTOUyIv8Q3iI4cjDB0MNqDtyBJeh6jmf6qRdLnc7tIzvfw5n
 5BR94H5CTRLbxd8dV2qzqX+mOu+/n3c/tetVBdnwnJRIyxIgTr5BIAH5Cphs3HZR
 rCQ7KtRs3cToq1P5RcQasO65PSPSflJE1dlB4We+9TyKsiO74l7s4QLBkNG7A500
 bkgr1wtRXtO2v2socJAHy4sU038M/bO+bFRsF78K9s3tmxenKZItxtpaHIfocC5K
 HcfwEm8HlxR6KhQCjtBqZfu4EmcMclqYgq1hahyedx0mU98XBr6goPzjgE64DFLJ
 KWoFVtn5xYx+s1nQhV68GYRX7RzRZWAQ2JXEVOVaCrPaIFlHrkDt6tCROjk+AI15
 PvLuNl08dfYJgg3lUJXpUuVP39TzVW+0NIESS1hCoPIuZ68SD45RaVs+wzRzJeLt
 xPSEfDvbv30bSDzOZzQmmdUBB/lziYQ478x8Ztt8f0IKFOOYR3RrZl08kuXcnxsP
 CE79y/wTcc8WM23Sw/vBq5LcDwrWrYCcjaGPGGB0/9VsAWX+XkgZagy3NsdCQW6G
 TT+xQFos6MkwbPG4Wlwb/Gd90T0WdUnHTzFqFTlP8lMn1PbHeBoh1bwdEmxjaSao
 c2Xryn3UkpI=
 =6p9V
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.13/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

Few improvments for GPMC (General Purpose Memory Controller)
found on TI SoCs to produce an error for missing bank-width
and to make the bootloader timing debug output usable for
device tree timings.

* tag 'omap-for-v4.13/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18 18:55:59 -07:00
Greg Kroah-Hartman
069a0f32c9 Merge 4.12-rc5 into char-misc-next
We want the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 08:18:10 +02:00
Arvind Yadav
761d031ec9 memory: ti-aemif: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:08:14 +09:00
Olof Johansson
da3d1d4a4e Merge tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes
Fixes for 4.12:

Fix two compilation issues

* tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: select CONFIG_ARM_CPU_SUSPEND
  memory: atmel-ebi: mark PM ops as __maybe_unused

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-01 17:07:31 -07:00
Uwe Kleine-König
c9eabf40d9 memory: omap-gpmc: add error message if bank-width property is absent
Instead of failing silently log a hint for the dt author about the
reason of the failure.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-31 10:08:10 -07:00
Uwe Kleine-König
95c278b243 memory: omap-gpmc: make dts snippet include semicolon
In the device tree each property must be terminated with a semicolon, so
include them in the output for easier cut-n-paste.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-31 10:07:08 -07:00
Tony Lindgren
aff523fb82 memory: omap-gpmc: Fix debug output for access width
The width needs to be configured in bytes with 1 meaning 8-bit
access and 2 meaning 16-bit access.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-16 08:12:47 -07:00
Arnd Bergmann
41b80bb1db memory: atmel-ebi: mark PM ops as __maybe_unused
We get a harmless warning without CONFIG_PM:

drivers/memory/atmel-ebi.c:584:12: error: 'atmel_ebi_resume' defined but not used [-Werror=unused-function]

Marking the function as __maybe_unused does the right thing here
and drops it silently when unused.

Fixes: a483fb10e5ea ("memory: atmel-ebi: Add PM ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-15 11:37:58 +02:00
Linus Torvalds
9786e34e0a MTD updates for 4.12-rc1:
NAND, from Boris:
 """
  - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
    davinci, brcmnand, omap)
  - a huge cleanup/rework of the denali driver accompanied with core
    fixes/improvements to simplify the driver code
  - a complete rewrite of the atmel driver to support new DT bindings
    make future evolution easier
  - the addition of per-vendor detection/initialization steps to avoid
    extending the nand_ids table with more extended-id entries
 """
 
 SPI NOR, from Cyrille:
 """
 - fixes in the hisi SPI controller driver.
 - fixes in the intel SPI controller driver.
 - fixes in the Mediatek SPI controller driver.
 - fixes to some SPI flash memories not supported the Chip Erase command.
 - add support to some new memory parts (Winbond, Macronix, Micron, ESMT).
 - add new driver for the STM32 QSPI controller.
 """
 
 And a few fixes for Gemini and Versatile platforms on physmap-of
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZE86yAAoJEFySrpd9RFgtlOoP/1o1s8dlKdd4TazdoxBTL2wy
 C4wPkqPWyfREcD5ZUYJgr6ENI2OnEwcAxAt2CXnqegx+ZIPToBW4/WK9gj/TNLRx
 AfSOz+EPPzo5uZwJPnfocgIFYuhsspymvmISwv66kPbjfkrSjo1l/K9nem3gh7an
 IkQdVVq8brvxNeDZOAzbsT2Y5DZNfs00g1jLXkcQrpfM0sWKcbHIUa0BTWy4WKGV
 ElTr+xh7QHh/Pd9/A5znd3xX54w5+YR/xe38jSBfTb0vEgw/RIfhIcnvxQ8G/7Se
 jE0+8GR5ZJGKwA9Xk5nFzS2G3uECMFNS75KfxkZ0LlEE6ivUvpDbokCbIU4bDOCt
 /8bWQf9AGA3gLHGgNUQTSt5HrkBXTGp917jtAZbI/y2MzTkLw3aAZ/m/j37vv9ON
 ezeGRO6VWK3bcimLFrt6KO5emYstmm4Tp4rRe3jakH7eyTlINDsecKtuMo2xVzyZ
 kK3tnDMdEntECAiKh3ndRdAUL3fs+/IdzWTAxnF9VQFQs1YxiZ1K8kY/zcN+rzbn
 CVkEhdm+tdDBx8XgOdfnOTGRAJ07dGOoDhLPR4/egC/ta6GIRkHQjFSwsW7bD9p9
 phHH6nQX9Bpza1JV/xvljezoHjvZkny4UhRpLgYMowb41DXv7os7ZV+g7kf5sd0i
 mGzCH46j0DmWQ1u5/Q6j
 =dxj5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND, from Boris:
   - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
     davinci, brcmnand, omap)
   - a huge cleanup/rework of the denali driver accompanied with core
     fixes/improvements to simplify the driver code
   - a complete rewrite of the atmel driver to support new DT bindings
     make future evolution easier
   - the addition of per-vendor detection/initialization steps to avoid
     extending the nand_ids table with more extended-id entries

  SPI NOR, from Cyrille:
   - fixes in the hisi, intel and Mediatek SPI controller drivers
   - fixes to some SPI flash memories not supporting the Chip Erase
     command.
   - add support to some new memory parts (Winbond, Macronix, Micron,
     ESMT).
   - add new driver for the STM32 QSPI controller

  And a few fixes for Gemini and Versatile platforms on physmap-of"

* tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits)
  MAINTAINERS: Update NAND subsystem git repositories
  mtd: nand: gpio: update binding
  mtd: nand: add ooblayout for old hamming layout
  mtd: oxnas_nand: Allocating more than necessary in probe()
  dt-bindings: mtd: Document the STM32 QSPI bindings
  mtd: mtk-nor: set controller's address width according to nor flash
  mtd: spi-nor: add driver for STM32 quad spi flash controller
  mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
  mtd: nand: davinci: add comment on NAND subpage write status on keystone
  mtd: nand: omap2: Fix partition creation via cmdline mtdparts
  mtd: nand: NULL terminate a of_device_id table
  mtd: nand: Fix a couple error codes
  mtd: nand: allow drivers to request minimum alignment for passed buffer
  mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
  mtd: nand: denali: allow to override revision number
  mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
  mtd: nand: denali_dt: remove dma-mask DT property
  mtd: nand: denali: support 64bit capable DMA engine
  mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
  mtd: nand: denali: support HW_ECC_FIXUP capability
  ...
2017-05-11 10:44:22 -07:00
Linus Torvalds
d26f552ebb - New Drivers
- Freescale MXS Low Resolution ADC
    - Freescale i.MX23/i.MX28 LRADC touchscreen
    - Motorola CPCAP Power Button
    - TI LMU (Lighting Management Unit)
    - Atmel SMC (Static Memory Controller)
 
  - New Device Support
    - Add support for X-Powers AXP803 to axp20x
    - Add support for Dialog Semi DA9061 to da9062-core
    - Add support for Intel Cougar Mountain to lpc_ich
    - Add support for Intel Gemini Lake to lpc_ich
 
  - New Functionality
    - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
    - Add IRQ sense support; motorola-cpcap
    - Add ACPI support; cros_ec
    - Add Reset support; altera-a10sr
    - Add ADC support; axp20x
    - Add AC Power support; axp20x
    - Add Runtime PM support; atmel-ebi, exynos-lpass
    - Add Battery Power Supply support; axp20x
    - Add Clock support; exynos-lpass, hi655x-pmic
 
  - Fix-ups
    - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
    - Add .remove() method; stm32-timers, exynos-lpass
    - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
    - Rename variables for clarity; axp20x
    - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
    - Improve formatting; arizona-core, axp20x
    - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
    - Simplify/refactor code; arizona-core, atmel-ebi
    - Improve error checking; intel_soc_pmic_core
 
  - Bug Fixes
    - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
    - Correct max-register value; stm32-timers
    - Extend timeout to account for clock stretching; cros_ec_spi
    - Use correct IRQ trigger type; motorola-cpcap
    - Fix bad use of IRQ sense register; motorola-cpcap
    - Logic error "||" should be "&&"; mxs-lradc-ts
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZAdDwAAoJEFGvii+H/HdhViMQAJ7Of3xKiS/P1d7RiOhs2OMY
 41R4GojoY2QSurndIbV/PBUbNMlJiqvIawbFCBz7rAZnIv6NatFQGCQnATci8iDV
 tFxz2m705ifstSQTWUr2ykRdNUdKkShLPHdbjs0ZbpV6Xa5tIXT0U7WpdDr+J51B
 422JHx8tVFrktkYCjg7VASKU9hzz8iRSbdpfu6ZitTT3yrr5Ivl0gaCCmXVyWTsF
 fy8DFvEpsAS1pToXGGeZHueTDIgePyEjwT+By6TuDvkObxvCbVrdhKrJnORfHRKx
 +aidbb4E8/ZNYmRERwl4VkAR7y2tenQat/Si+4rtwYHNTcapjjpdEElQTKkIAUpy
 L5Y9Ai0/ihDXpCPmMnf7omnt3qxAltE4voUk2WUIxDOiaFl6XwyxFPDoy5l8T2IM
 i1akRFss/lov9r3dWzxApTdMNwEdeXnHbZgW60h6RHyCH3dqfN3dFcfu9IX/ua01
 HHI4ltkmaokXJmwvpa+/oVxGAfcoS5AGRw1uRfIN1fbjIxEeRS4I8iogqneVQ5GJ
 D766JIhuf1KKBIWu5DYwfCyTgSdBnEt/J/vTIe4zOZrBk/StbeygWfhUMRSutglK
 eORpwzsX8DnS4SYRErCcRRlePB/NU2GvmHOXSApSem9ifHx8sQGM7QZt2am5JYRp
 q/6gViepBHxrA8Xv6mWJ
 =SHiw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale MXS Low Resolution ADC
   - Freescale i.MX23/i.MX28 LRADC touchscreen
   - Motorola CPCAP Power Button
   - TI LMU (Lighting Management Unit)
   - Atmel SMC (Static Memory Controller)

  New Device Support:
   - Add support for X-Powers AXP803 to axp20x
   - Add support for Dialog Semi DA9061 to da9062-core
   - Add support for Intel Cougar Mountain to lpc_ich
   - Add support for Intel Gemini Lake to lpc_ich

  New Functionality:
   - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
   - Add IRQ sense support; motorola-cpcap
   - Add ACPI support; cros_ec
   - Add Reset support; altera-a10sr
   - Add ADC support; axp20x
   - Add AC Power support; axp20x
   - Add Runtime PM support; atmel-ebi, exynos-lpass
   - Add Battery Power Supply support; axp20x
   - Add Clock support; exynos-lpass, hi655x-pmic

  Fix-ups:
   - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
   - Add .remove() method; stm32-timers, exynos-lpass
   - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
   - Rename variables for clarity; axp20x
   - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
   - Improve formatting; arizona-core, axp20x
   - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
   - Simplify/refactor code; arizona-core, atmel-ebi
   - Improve error checking; intel_soc_pmic_core

  Bug Fixes:
   - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
   - Correct max-register value; stm32-timers
   - Extend timeout to account for clock stretching; cros_ec_spi
   - Use correct IRQ trigger type; motorola-cpcap
   - Fix bad use of IRQ sense register; motorola-cpcap
   - Logic error "||" should be "&&"; mxs-lradc-ts"

* tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  input: touchscreen: mxs-lradc: || vs && typos
  dt-bindings: Add AXP803's regulator info
  mfd: axp20x: Support AXP803 variant
  dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
  dt-bindings: Make AXP20X compatible strings one per line
  mfd: intel_soc_pmic_core: Fix unchecked return value
  mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable()
  mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  mfd: palmas: Fixed spelling mistake in error message
  mfd: lpc_ich: Add support for Intel Gemini Lake SoC
  mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth
  mfd: intel_soc_pmic: Fix a mess with compilation units
  mfd: exynos-lpass: Add runtime PM support
  mfd: exynos-lpass: Add missing remove() function
  mfd: exynos-lpass: Add support for clocks
  mfd: exynos-lpass: Remove pad retention control
  iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  mfd: cpcap: Fix bad use of IRQ sense register
  mfd: cpcap: Use ack_invert interrupts
  ...
2017-05-03 12:16:25 -07:00
Boris Brezillon
4407319d8f memory: atmel-ebi: Add PM ops
Add a ->resume() hook to make sure the EBI dev configs are correctly
restored when resuming the platform.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:06 +01:00
Boris Brezillon
aaa572b945 memory: atmel-ebi: Add missing ->numcs assignment
ebid->numcs is never assigned, set it to numcs after allocating the
EBI dev object.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:06 +01:00
Boris Brezillon
9453fa4694 memory: atmel-ebi: Change naming scheme
The EBI block is not only available on at91 SoCs, but also on avr32 ones.
Change the structure and function prefixes from at91_ebi to atmel_ebi to
match this fact and make the prefix and driver name consistent.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:06 +01:00
Boris Brezillon
d9f81dad16 memory: atmel-ebi: Stop using reg_field objects for simple things
Turn the ->ebi_csa reg field into a simple offset that can be used with
with the matrix regmap. Using reg fields was overkill for this use case.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:06 +01:00