Commit Graph

77 Commits

Author SHA1 Message Date
Eric W. Biederman
296990deb3 mnt: Make propagate_umount less slow for overlapping mount propagation trees
Andrei Vagin pointed out that time to executue propagate_umount can go
non-linear (and take a ludicrious amount of time) when the mount
propogation trees of the mounts to be unmunted by a lazy unmount
overlap.

Make the walk of the mount propagation trees nearly linear by
remembering which mounts have already been visited, allowing
subsequent walks to detect when walking a mount propgation tree or a
subtree of a mount propgation tree would be duplicate work and to skip
them entirely.

Walk the list of mounts whose propgatation trees need to be traversed
from the mount highest in the mount tree to mounts lower in the mount
tree so that odds are higher that the code will walk the largest trees
first, allowing later tree walks to be skipped entirely.

Add cleanup_umount_visitation to remover the code's memory of which
mounts have been visited.

Add the functions last_slave and skip_propagation_subtree to allow
skipping appropriate parts of the mount propagation tree without
needing to change the logic of the rest of the code.

A script to generate overlapping mount propagation trees:

$ cat runs.h
set -e
mount -t tmpfs zdtm /mnt
mkdir -p /mnt/1 /mnt/2
mount -t tmpfs zdtm /mnt/1
mount --make-shared /mnt/1
mkdir /mnt/1/1

iteration=10
if [ -n "$1" ] ; then
	iteration=$1
fi

for i in $(seq $iteration); do
	mount --bind /mnt/1/1 /mnt/1/1
done

mount --rbind /mnt/1 /mnt/2

TIMEFORMAT='%Rs'
nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 ))
echo -n "umount -l /mnt/1 -> $nr        "
time umount -l /mnt/1

nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l )
time umount -l /mnt/2

$ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done

Here are the performance numbers with and without the patch:

     mhash |  8192   |  8192  | 1048576 | 1048576
    mounts | before  | after  |  before | after
    ------------------------------------------------
      1025 |  0.040s | 0.016s |  0.038s | 0.019s
      2049 |  0.094s | 0.017s |  0.080s | 0.018s
      4097 |  0.243s | 0.019s |  0.206s | 0.023s
      8193 |  1.202s | 0.028s |  1.562s | 0.032s
     16385 |  9.635s | 0.036s |  9.952s | 0.041s
     32769 | 60.928s | 0.063s | 44.321s | 0.064s
     65537 |         | 0.097s |         | 0.097s
    131073 |         | 0.233s |         | 0.176s
    262145 |         | 0.653s |         | 0.344s
    524289 |         | 2.305s |         | 0.735s
   1048577 |         | 7.107s |         | 2.603s

Andrei Vagin reports fixing the performance problem is part of the
work to fix CVE-2016-6213.

Cc: stable@vger.kernel.org
Fixes: a05964f391 ("[PATCH] shared mounts handling: umount")
Reported-by: Andrei Vagin <avagin@openvz.org>
Reviewed-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:41:17 -05:00
Eric W. Biederman
99b19d1647 mnt: In propgate_umount handle visiting mounts in any order
While investigating some poor umount performance I realized that in
the case of overlapping mount trees where some of the mounts are locked
the code has been failing to unmount all of the mounts it should
have been unmounting.

This failure to unmount all of the necessary
mounts can be reproduced with:

$ cat locked_mounts_test.sh

mount -t tmpfs test-base /mnt
mount --make-shared /mnt
mkdir -p /mnt/b

mount -t tmpfs test1 /mnt/b
mount --make-shared /mnt/b
mkdir -p /mnt/b/10

mount -t tmpfs test2 /mnt/b/10
mount --make-shared /mnt/b/10
mkdir -p /mnt/b/10/20

mount --rbind /mnt/b /mnt/b/10/20

unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi'
sleep 1
umount -l /mnt/b
wait %%

$ unshare -Urm ./locked_mounts_test.sh

This failure is corrected by removing the prepass that marks mounts
that may be umounted.

A first pass is added that umounts mounts if possible and if not sets
mount mark if they could be unmounted if they weren't locked and adds
them to a list to umount possibilities.  This first pass reconsiders
the mounts parent if it is on the list of umount possibilities, ensuring
that information of umoutability will pass from child to mount parent.

A second pass then walks through all mounts that are umounted and processes
their children unmounting them or marking them for reparenting.

A last pass cleans up the state on the mounts that could not be umounted
and if applicable reparents them to their first parent that remained
mounted.

While a bit longer than the old code this code is much more robust
as it allows information to flow up from the leaves and down
from the trunk making the order in which mounts are encountered
in the umount propgation tree irrelevant.

Cc: stable@vger.kernel.org
Fixes: 0c56fe3142 ("mnt: Don't propagate unmounts to locked mounts")
Reviewed-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:41:16 -05:00
Eric W. Biederman
570487d3fa mnt: In umount propagation reparent in a separate pass
It was observed that in some pathlogical cases that the current code
does not unmount everything it should.  After investigation it
was determined that the issue is that mnt_change_mntpoint can
can change which mounts are available to be unmounted during mount
propagation which is wrong.

The trivial reproducer is:
$ cat ./pathological.sh

mount -t tmpfs test-base /mnt
cd /mnt
mkdir 1 2 1/1
mount --bind 1 1
mount --make-shared 1
mount --bind 1 2
mount --bind 1/1 1/1
mount --bind 1/1 1/1
echo
grep test-base /proc/self/mountinfo
umount 1/1
echo
grep test-base /proc/self/mountinfo

$ unshare -Urm ./pathological.sh

The expected output looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

The output without the fix looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

That last mount in the output was in the propgation tree to be unmounted but
was missed because the mnt_change_mountpoint changed it's parent before the walk
through the mount propagation tree observed it.

Cc: stable@vger.kernel.org
Fixes: 1064f874ab ("mnt: Tuck mounts under others instead of creating shadow/side mounts.")
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:40:32 -05:00
Eric W. Biederman
1064f874ab mnt: Tuck mounts under others instead of creating shadow/side mounts.
Ever since mount propagation was introduced in cases where a mount in
propagated to parent mount mountpoint pair that is already in use the
code has placed the new mount behind the old mount in the mount hash
table.

This implementation detail is problematic as it allows creating
arbitrary length mount hash chains.

Furthermore it invalidates the constraint maintained elsewhere in the
mount code that a parent mount and a mountpoint pair will have exactly
one mount upon them.  Making it hard to deal with and to talk about
this special case in the mount code.

Modify mount propagation to notice when there is already a mount at
the parent mount and mountpoint where a new mount is propagating to
and place that preexisting mount on top of the new mount.

Modify unmount propagation to notice when a mount that is being
unmounted has another mount on top of it (and no other children), and
to replace the unmounted mount with the mount on top of it.

Move the MNT_UMUONT test from __lookup_mnt_last into
__propagate_umount as that is the only call of __lookup_mnt_last where
MNT_UMOUNT may be set on any mount visible in the mount hash table.

These modifications allow:
 - __lookup_mnt_last to be removed.
 - attach_shadows to be renamed __attach_mnt and its shadow
   handling to be removed.
 - commit_tree to be simplified
 - copy_tree to be simplified

The result is an easier to understand tree of mounts that does not
allow creation of arbitrary length hash chains in the mount hash table.

The result is also a very slight userspace visible difference in semantics.
The following two cases now behave identically, where before order
mattered:

case 1: (explicit user action)
	B is a slave of A
	mount something on A/a , it will propagate to B/a
	and than mount something on B/a

case 2: (tucked mount)
	B is a slave of A
	mount something on B/a
	and than mount something on A/a

Histroically umount A/a would fail in case 1 and succeed in case 2.
Now umount A/a succeeds in both configurations.

This very small change in semantics appears if anything to be a bug
fix to me and my survey of userspace leads me to believe that no programs
will notice or care of this subtle semantic change.

v2: Updated to mnt_change_mountpoint to not call dput or mntput
and instead to decrement the counts directly.  It is guaranteed
that there will be other references when mnt_change_mountpoint is
called so this is safe.

v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt
    As the locking in fs/namespace.c changed between v2 and v3.

v4: Reworked the logic in propagate_mount_busy and __propagate_umount
    that detects when a mount completely covers another mount.

v5: Removed unnecessary tests whose result is alwasy true in
    find_topper and attach_recursive_mnt.

v6: Document the user space visible semantic difference.

Cc: stable@vger.kernel.org
Fixes: b90fa9ae8f ("[PATCH] shared mount handling: bind and rbind")
Tested-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-02-04 00:01:06 +13:00
Al Viro
5235d448c4 reorganize do_make_slave()
Make sure that clone_mnt() never returns a mount with MNT_SHARED in
flags, but without a valid ->mnt_group_id.  That allows to demystify
do_make_slave() quite a bit, among other things.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-16 16:30:49 -05:00
Eric W. Biederman
d29216842a mnt: Add a per mount namespace limit on the number of mounts
CAI Qian <caiqian@redhat.com> pointed out that the semantics
of shared subtrees make it possible to create an exponentially
increasing number of mounts in a mount namespace.

    mkdir /tmp/1 /tmp/2
    mount --make-rshared /
    for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done

Will create create 2^20 or 1048576 mounts, which is a practical problem
as some people have managed to hit this by accident.

As such CVE-2016-6213 was assigned.

Ian Kent <raven@themaw.net> described the situation for autofs users
as follows:

> The number of mounts for direct mount maps is usually not very large because of
> the way they are implemented, large direct mount maps can have performance
> problems. There can be anywhere from a few (likely case a few hundred) to less
> than 10000, plus mounts that have been triggered and not yet expired.
>
> Indirect mounts have one autofs mount at the root plus the number of mounts that
> have been triggered and not yet expired.
>
> The number of autofs indirect map entries can range from a few to the common
> case of several thousand and in rare cases up to between 30000 and 50000. I've
> not heard of people with maps larger than 50000 entries.
>
> The larger the number of map entries the greater the possibility for a large
> number of active mounts so it's not hard to expect cases of a 1000 or somewhat
> more active mounts.

So I am setting the default number of mounts allowed per mount
namespace at 100,000.  This is more than enough for any use case I
know of, but small enough to quickly stop an exponential increase
in mounts.  Which should be perfect to catch misconfigurations and
malfunctioning programs.

For anyone who needs a higher limit this can be changed by writing
to the new /proc/sys/fs/mount-max sysctl.

Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-30 12:46:48 -05:00
Eric W. Biederman
5ec0811d30 propogate_mnt: Handle the first propogated copy being a slave
When the first propgated copy was a slave the following oops would result:
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
> IP: [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0
> PGD bacd4067 PUD bac66067 PMD 0
> Oops: 0000 [#1] SMP
> Modules linked in:
> CPU: 1 PID: 824 Comm: mount Not tainted 4.6.0-rc5userns+ #1523
> Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
> task: ffff8800bb0a8000 ti: ffff8800bac3c000 task.ti: ffff8800bac3c000
> RIP: 0010:[<ffffffff811fba4e>]  [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0
> RSP: 0018:ffff8800bac3fd38  EFLAGS: 00010283
> RAX: 0000000000000000 RBX: ffff8800bb77ec00 RCX: 0000000000000010
> RDX: 0000000000000000 RSI: ffff8800bb58c000 RDI: ffff8800bb58c480
> RBP: ffff8800bac3fd48 R08: 0000000000000001 R09: 0000000000000000
> R10: 0000000000001ca1 R11: 0000000000001c9d R12: 0000000000000000
> R13: ffff8800ba713800 R14: ffff8800bac3fda0 R15: ffff8800bb77ec00
> FS:  00007f3c0cd9b7e0(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000010 CR3: 00000000bb79d000 CR4: 00000000000006e0
> Stack:
>  ffff8800bb77ec00 0000000000000000 ffff8800bac3fd88 ffffffff811fbf85
>  ffff8800bac3fd98 ffff8800bb77f080 ffff8800ba713800 ffff8800bb262b40
>  0000000000000000 0000000000000000 ffff8800bac3fdd8 ffffffff811f1da0
> Call Trace:
>  [<ffffffff811fbf85>] propagate_mnt+0x105/0x140
>  [<ffffffff811f1da0>] attach_recursive_mnt+0x120/0x1e0
>  [<ffffffff811f1ec3>] graft_tree+0x63/0x70
>  [<ffffffff811f1f6b>] do_add_mount+0x9b/0x100
>  [<ffffffff811f2c1a>] do_mount+0x2aa/0xdf0
>  [<ffffffff8117efbe>] ? strndup_user+0x4e/0x70
>  [<ffffffff811f3a45>] SyS_mount+0x75/0xc0
>  [<ffffffff8100242b>] do_syscall_64+0x4b/0xa0
>  [<ffffffff81988f3c>] entry_SYSCALL64_slow_path+0x25/0x25
> Code: 00 00 75 ec 48 89 0d 02 22 22 01 8b 89 10 01 00 00 48 89 05 fd 21 22 01 39 8e 10 01 00 00 0f 84 e0 00 00 00 48 8b 80 d8 00 00 00 <48> 8b 50 10 48 89 05 df 21 22 01 48 89 15 d0 21 22 01 8b 53 30
> RIP  [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0
>  RSP <ffff8800bac3fd38>
> CR2: 0000000000000010
> ---[ end trace 2725ecd95164f217 ]---

This oops happens with the namespace_sem held and can be triggered by
non-root users.  An all around not pleasant experience.

To avoid this scenario when finding the appropriate source mount to
copy stop the walk up the mnt_master chain when the first source mount
is encountered.

Further rewrite the walk up the last_source mnt_master chain so that
it is clear what is going on.

The reason why the first source mount is special is that it it's
mnt_parent is not a mount in the dest_mnt propagation tree, and as
such termination conditions based up on the dest_mnt mount propgation
tree do not make sense.

To avoid other kinds of confusion last_dest is not changed when
computing last_source.  last_dest is only used once in propagate_one
and that is above the point of the code being modified, so changing
the global variable is meaningless and confusing.

Cc: stable@vger.kernel.org
fixes: f2ebb3a921 ("smarter propagate_mnt()")
Reported-by: Tycho Andersen <tycho.andersen@canonical.com>
Reviewed-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-05-05 09:54:45 -05:00
Maxim Patlasov
7ae8fd0351 fs/pnode.c: treat zero mnt_group_id-s as unequal
propagate_one(m) calculates "type" argument for copy_tree() like this:

>    if (m->mnt_group_id == last_dest->mnt_group_id) {
>        type = CL_MAKE_SHARED;
>    } else {
>        type = CL_SLAVE;
>        if (IS_MNT_SHARED(m))
>           type |= CL_MAKE_SHARED;
>   }

The "type" argument then governs clone_mnt() behavior with respect to flags
and mnt_master of new mount. When we iterate through a slave group, it is
possible that both current "m" and "last_dest" are not shared (although,
both are slaves, i.e. have non-NULL mnt_master-s). Then the comparison
above erroneously makes new mount shared and sets its mnt_master to
last_source->mnt_master. The patch fixes the problem by handling zero
mnt_group_id-s as though they are unequal.

The similar problem exists in the implementation of "else" clause above
when we have to ascend upward in the master/slave tree by calling:

>    last_source = last_source->mnt_master;
>    last_dest = last_source->mnt_parent;

proper number of times. The last step is governed by
"n->mnt_group_id != last_dest->mnt_group_id" condition that may lie if
both are zero. The patch fixes this case in the same way as the former one.

[AV: don't open-code an obvious helper...]

Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-02-20 00:15:52 -05:00
Eric W. Biederman
0c56fe3142 mnt: Don't propagate unmounts to locked mounts
If the first mount in shared subtree is locked don't unmount the
shared subtree.

This is ensured by walking through the mounts parents before children
and marking a mount as unmountable if it is not locked or it is locked
but it's parent is marked.

This allows recursive mount detach to propagate through a set of
mounts when unmounting them would not reveal what is under any locked
mount.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:20 -05:00
Eric W. Biederman
5d88457eb5 mnt: On an unmount propagate clearing of MNT_LOCKED
A prerequisite of calling umount_tree is that the point where the tree
is mounted at is valid to unmount.

If we are propagating the effect of the unmount clear MNT_LOCKED in
every instance where the same filesystem is mounted on the same
mountpoint in the mount tree, as we know (by virtue of the fact
that umount_tree was called) that it is safe to reveal what
is at that mountpoint.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:19 -05:00
Eric W. Biederman
411a938b5a mnt: Delay removal from the mount hash.
- Modify __lookup_mnt_hash_last to ignore mounts that have MNT_UMOUNTED set.
- Don't remove mounts from the mount hash table in propogate_umount
- Don't remove mounts from the mount hash table in umount_tree before
  the entire list of mounts to be umounted is selected.
- Remove mounts from the mount hash table as the last thing that
  happens in the case where a mount has a parent in umount_tree.
  Mounts without parents are not hashed (by definition).

This paves the way for delaying removal from the mount hash table even
farther and fixing the MNT_LOCKED vs MNT_DETACH issue.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:19 -05:00
Eric W. Biederman
590ce4bcbf mnt: Add MNT_UMOUNT flag
In some instances it is necessary to know if the the unmounting
process has begun on a mount.  Add MNT_UMOUNT to make that reliably
testable.

This fix gets used in fixing locked mounts in MNT_DETACH

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:18 -05:00
Eric W. Biederman
c003b26ff9 mnt: In umount_tree reuse mnt_list instead of mnt_hash
umount_tree builds a list of mounts that need to be unmounted.
Utilize mnt_list for this purpose instead of mnt_hash.  This begins to
allow keeping a mount on the mnt_hash after it is unmounted, which is
necessary for a properly functioning MNT_LOCKED implementation.

The fact that mnt_list is an ordinary list makding available list_move
is nice bonus.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:18 -05:00
Eric W. Biederman
8486a7882b mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
Clear MNT_LOCKED in the callers of copy_tree except copy_mnt_ns, and
collect_mounts.  In copy_mnt_ns it is necessary to create an exact
copy of a mount tree, so not clearing MNT_LOCKED is important.
Similarly collect_mounts is used to take a snapshot of the mount tree
for audit logging purposes and auditing using a faithful copy of the
tree is important.

This becomes particularly significant when we start setting MNT_LOCKED
on rootfs to prevent it from being unmounted.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-02 10:46:50 -06:00
Al Viro
88b368f27a get rid of propagate_umount() mistakenly treating slaves as busy.
The check in __propagate_umount() ("has somebody explicitly mounted
something on that slave?") is done *before* taking the already doomed
victims out of the child lists.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-30 18:31:41 -04:00
Al Viro
f2ebb3a921 smarter propagate_mnt()
The current mainline has copies propagated to *all* nodes, then
tears down the copies we made for nodes that do not contain
counterparts of the desired mountpoint.  That sets the right
propagation graph for the copies (at teardown time we move
the slaves of removed node to a surviving peer or directly
to master), but we end up paying a fairly steep price in
useless allocations.  It's fairly easy to create a situation
where N calls of mount(2) create exactly N bindings, with
O(N^2) vfsmounts allocated and freed in process.

Fortunately, it is possible to avoid those allocations/freeings.
The trick is to create copies in the right order and find which
one would've eventually become a master with the current algorithm.
It turns out to be possible in O(nodes getting propagation) time
and with no extra allocations at all.

One part is that we need to make sure that eventual master will be
created before its slaves, so we need to walk the propagation
tree in a different order - by peer groups.  And iterate through
the peers before dealing with the next group.

Another thing is finding the (earlier) copy that will be a master
of one we are about to create; to do that we are (temporary) marking
the masters of mountpoints we are attaching the copies to.

Either we are in a peer of the last mountpoint we'd dealt with,
or we have the following situation: we are attaching to mountpoint M,
the last copy S_0 had been attached to M_0 and there are sequences
S_0...S_n, M_0...M_n such that S_{i+1} is a master of S_{i},
S_{i} mounted on M{i} and we need to create a slave of the first S_{k}
such that M is getting propagation from M_{k}.  It means that the master
of M_{k} will be among the sequence of masters of M.  On the
other hand, the nearest marked node in that sequence will either
be the master of M_{k} or the master of M_{k-1} (the latter -
in the case if M_{k-1} is a slave of something M gets propagation
from, but in a wrong peer group).

So we go through the sequence of masters of M until we find
a marked one (P).  Let N be the one before it.  Then we go through
the sequence of masters of S_0 until we find one (say, S) mounted
on a node D that has P as master and check if D is a peer of N.
If it is, S will be the master of new copy, if not - the master of S
will be.

That's it for the hard part; the rest is fairly simple.  Iterator
is in next_group(), handling of one prospective mountpoint is
propagate_one().

It seems to survive all tests and gives a noticably better performance
than the current mainline for setups that are seriously using shared
subtrees.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:08 -04:00
Al Viro
38129a13e6 switch mnt_hash to hlist
fixes RCU bug - walking through hlist is safe in face of element moves,
since it's self-terminating.  Cyclic lists are not - if we end up jumping
to another hash chain, we'll loop infinitely without ever hitting the
original list head.

[fix for dumb braino folded]

Spotted by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30 19:18:51 -04:00
Al Viro
474279dc0f split __lookup_mnt() in two functions
Instead of passing the direction as argument (and checking it on every
step through the hash chain), just have separate __lookup_mnt() and
__lookup_mnt_last().  And use the standard iterators...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:35:00 -04:00
Al Viro
719ea2fbb5 new helpers: lock_mount_hash/unlock_mount_hash
aka br_write_{lock,unlock} of vfsmount_lock.  Inlines in fs/mount.h,
vfsmount_lock extern moved over there as well.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:59 -04:00
Al Viro
aba809cf09 namespace.c: get rid of mnt_ghosts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:58 -04:00
Takashi Iwai
5d477b6079 vfs: Fix invalid ida_remove() call
When the group id of a shared mount is not allocated, the umount still
tries to call mnt_release_group_id(), which eventually hits a kernel
warning at ida_remove() spewing a message like:
  ida_remove called for id=0 which is not allocated.

This patch fixes the bug simply checking the group id in the caller.

Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-31 15:16:33 -04:00
Linus Torvalds
20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Al Viro
328e6d9014 switch unlock_mount() to namespace_unlock(), convert all umount_tree() callers
which allows to kill the last argument of umount_tree() and make release_mounts()
static.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:53 -04:00
Al Viro
84d17192d2 get rid of full-hash scan on detaching vfsmounts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:52 -04:00
Eric W. Biederman
132c94e31b vfs: Carefully propogate mounts across user namespaces
As a matter of policy MNT_READONLY should not be changable if the
original mounter had more privileges than creator of the mount
namespace.

Add the flag CL_UNPRIVILEGED to note when we are copying a mount from
a mount namespace that requires more privileges to a mount namespace
that requires fewer privileges.

When the CL_UNPRIVILEGED flag is set cause clone_mnt to set MNT_NO_REMOUNT
if any of the mnt flags that should never be changed are set.

This protects both mount propagation and the initial creation of a less
privileged mount namespace.

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-27 07:50:05 -07:00
David Howells
be34d1a3bc VFS: Make clone_mnt()/copy_tree()/collect_mounts() return errors
copy_tree() can theoretically fail in a case other than ENOMEM, but always
returns NULL which is interpreted by callers as -ENOMEM.  Change it to return
an explicit error.

Also change clone_mnt() for consistency and because union mounts will add new
error cases.

Thanks to Andreas Gruenbacher <agruen@suse.de> for a bug fix.
[AV: folded braino fix by Dan Carpenter]

Original-author: Valerie Aurora <vaurora@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Valerie Aurora <valerie.aurora@gmail.com>
Cc: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:37:27 +04:00
Andi Kleen
962830df36 brlocks/lglocks: API cleanups
lglocks and brlocks are currently generated with some complicated macros
in lglock.h.  But there's no reason to not just use common utility
functions and put all the data into a common data structure.

In preparation, this patch changes the API to look more like normal
function calls with pointers, not magic macros.

The patch is rather large because I move over all users in one go to keep
it bisectable.  This impacts the VFS somewhat in terms of lines changed.
But no actual behaviour change.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-29 23:28:41 -04:00
Al Viro
fc7be130c7 vfs: switch pnode.h macros to struct mount *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:11 -05:00
Al Viro
863d684f94 vfs: move the rest of int fields to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:10 -05:00
Al Viro
15169fe784 vfs: mnt_id/mnt_group_id moved
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:10 -05:00
Al Viro
143c8c91ce vfs: mnt_ns moved to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:09 -05:00
Al Viro
6776db3d32 vfs: take mnt_share/mnt_slave/mnt_slave_list and mnt_expire to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:08 -05:00
Al Viro
32301920f4 vfs: and now we can make ->mnt_master point to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:08 -05:00
Al Viro
d10e8def07 vfs: take mnt_master to struct mount
make IS_MNT_SLAVE take struct mount * at the same time

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:08 -05:00
Al Viro
14cf1fa8f5 vfs: spread struct mount - remaining argument of mnt_set_mountpoint()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:07 -05:00
Al Viro
a8d56d8e4f vfs: spread struct mount - propagate_mnt()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:07 -05:00
Al Viro
c937135d98 vfs: spread struct mount - shared subtree iterators
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:07 -05:00
Al Viro
6fc7871fed vfs: spread struct mount - get_dominating_id / do_make_slave
next pile of horrors, similar to mnt_parent one; this time it's
mnt_master.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:06 -05:00
Al Viro
6b41d536f7 vfs: take mnt_child/mnt_mounts to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:06 -05:00
Al Viro
83adc75322 vfs: spread struct mount - work with counters
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:05 -05:00
Al Viro
a73324da7a vfs: move mnt_mountpoint to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:05 -05:00
Al Viro
0714a53380 vfs: now it can be done - make mnt_parent point to struct mount
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:05 -05:00
Al Viro
3376f34fff vfs: mnt_parent moved to struct mount
the second victim...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:04 -05:00
Al Viro
643822b41e vfs: spread struct mount - is_path_reachable
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:04 -05:00
Al Viro
1ab5973862 vfs: spread struct mount - do_umount/propagate_mount_busy
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:03 -05:00
Al Viro
44d964d609 vfs: spread struct mount mnt_set_mountpoint child argument
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:03 -05:00
Al Viro
87129cc0e3 vfs: spread struct mount - clone_mnt/copy_tree argument
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:03 -05:00
Al Viro
761d5c38eb vfs: spread struct mount - umount_tree argument
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:02 -05:00
Al Viro
1b8e5564b9 vfs: the first spoils - mnt_hash moved
taken out of struct vfsmount into struct mount

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:02 -05:00
Al Viro
cb338d06e9 vfs: spread struct mount - clone_mnt/copy_tree result
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:57:01 -05:00