It is useful for testing purposes to be able to inject errors by writing
bad protection information to media with checking disabled and then
attempting to read it back. Extend scsi_debug's PI verification logic to
give the driver feature parity with commercially available drives. Almost
all devices with PI capability support RDPROTECT and WRPROTECT values of 0,
1, and 3.
Link: https://lore.kernel.org/r/20210609033929.3815-10-martin.petersen@oracle.com
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-10-martin.petersen@oracle.com>
The function used to dump sectors containing protection information errors
was useful during initial development over a decade ago. However,
dump_sector() substantially slows down the system during testing due to
writing an entire sector's worth of data to syslog on every error.
We now log plenty of information about the nature of detected protection
information errors throughout the stack. Dumping the entire contents of an
offending sector is no longer needed.
Link: https://lore.kernel.org/r/20210609033929.3815-9-martin.petersen@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-9-martin.petersen@oracle.com>
Use scsi_prot_ref_tag() and scsi_prot_interval() instead scsi_get_lba() and
sector_size.
Link: https://lore.kernel.org/r/20210609033929.3815-7-martin.petersen@oracle.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-7-martin.petersen@oracle.com>
Use the SCSI midlayer interfaces to query protection interval, reference
tag, and per-command DIX flags.
Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.com
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-4-martin.petersen@oracle.com>
We are about to remove the request pointer from struct scsi_cmnd and that
will complicate getting to the ref_tag via t10_pi_ref_tag() in the various
drivers. Introduce a helper function to retrieve the reference tag so
drivers will not have to worry about the details.
Link: https://lore.kernel.org/r/20210609033929.3815-2-martin.petersen@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-2-martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210714182847.50360-10-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct driver's ISR accessing a data structure member that has not been
fully initialized during driver initialization.
The pqi queue groups can have uninitialized members when an interrupt
fires. This has not resulted in any driver crashes. This was found during
our own internal testing. No bugs were ever filed.
Link: https://lore.kernel.org/r/20210714182847.50360-9-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for ZTE RM241-18i 2G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_5445
Add support for ZTE RM242-18i 4G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_5446
Add support for ZTE RM243-18i device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_5447
Add support for ZTE SDPSA/B-18i 4G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_0B27
Add support for ZTE SDPSA/B_I-18i device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_0B29
Add support for ZTE SDPSA/B_L-18i 2G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_0B45
Link: https://lore.kernel.org/r/20210714182847.50360-8-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for Norsi ntcom Raid-24i controller:
VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161
Link: https://lore.kernel.org/r/20210714182847.50360-7-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Report on SCSI command that has triggered the reset. Also add check for
NULL SCSI commands resulting from issuing sg_reset when there is no
outstanding commands.
Example:
sg_reset -d /dev/sgXY
smartpqi 0000:39:00.0: resetting scsi 4:0:1:0 due to cmd 0x12
Link: https://lore.kernel.org/r/20210714182847.50360-6-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updated copyright notices and company name strings to reflect Microchip
ownership.
Link: https://lore.kernel.org/r/20210714182847.50360-3-don.brace@microchip.com
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for H3C P4408-Ma-8i-2GB device ID:
VID_9005, DID_028F, SVID_193D and SDID_1108
VID_9005, DID_028F, SVID_193D and SDID_1109
Link: https://lore.kernel.org/r/20210714182847.50360-2-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights for files modified by the 12.8.0.11 patch set.
Link: https://lore.kernel.org/r/20210707184351.67872-21-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.11.
Link: https://lore.kernel.org/r/20210707184351.67872-20-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a node moves to NPR state due to a device recovery event, the
nlp_fc4_types in the node are cleared. An ADISC received for a node in the
NPR state triggers an ADISC. Without fc4 types being known, the calls to
register with the transport are no-op'd, thus no additional references are
placed on the node by transport re-registrations. A subsequent RSCN could
trigger another unregister request, which will decrement the reference
counts, leading to the ref count hitting zero and the node being freed
while futher discovery on the node is being attempted by the RSCN event
handling.
Fix by skipping the trigger of an ADISC when in NPR state. The normal ADISC
process will kick off in the regular discovery path after receiving a
response from name server.
Link: https://lore.kernel.org/r/20210707184351.67872-19-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During RSCN storms, some instances of LIP on SLI-3 adapters lead to a
situation where FLOGIs keep failing with firmware indicating an illegal
command error code. This situation was preceded by an ADISC completion
that was processed while the link was down. This path on SLI-3 performs a
CLEAR_LA and attempts to activate a VPI with REG_VPI. Later, as the FLOGI
completes, it's no longer in sync with the VPI state. In SLI-3 it is
illegal to have an active VPI during FLOGI.
Resolve by circumventing the SLI-3 path that performs the CLEAR_LA and
REG_VPI. The path will be taken after the FLOGI after the next Link Up.
Link: https://lore.kernel.org/r/20210707184351.67872-18-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the PLOGI and ADISC completion handling, the device removal event could
be skipped during some link errors. This could leave a stale node in UNUSED
state. Driver unload would hang for a long time waiting for this node to
be freed.
Resolve by taking the following steps:
- Always post ADISC completion events to discovery state machine upon
ADISC completion.
- In case of a completion error for PLOGI/ADISC, ensure that init refcount
is dropped if not registered with transport.
Link: https://lore.kernel.org/r/20210707184351.67872-17-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state
are moved to NPR state in order to revalidate the login. This triggers an
immediate unregister from SCSI/NVMe backend. The assumption is that the
node may be missing. The re-registration with the backend happens after
either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or
when ADISC completes successfully (rediscover with ADISC enabled).
However, the NVMe-FC standard provides for an RSCN to be triggered when
the remote port supports a discovery controller and there was a change
of discovery log content. As the remote port typically also supports
storage subsystems, this unregister causes all storage controller
connections to fail and require reconnect.
Correct by reworking the code to ensure that the unregistration only occurs
when a login state is truly terminated, thereby leaving the NVMe storage
controllers in place.
The changes made are:
- Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry.
- Do not clear wwpn/wwnn values upon ADISC failure.
- Move MAPPED nodes to NPR during RSCN processing, but do not unregister
with transport. On GIDFT completion, identify missing nodes (not marked
NLP_NPR_2B_DISC) and unregister them.
- Perform unregistration for nodes that will go through ADISC processing
if ADISC completion fails.
- Successful ADISC completion will move node back to MAPPED state.
Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Assign a default value of 1 to driver module parameter lpfc_use_adisc.
Link: https://lore.kernel.org/r/20210707184351.67872-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SLI4 interface changed the manner used to indicate PBDE support.
Rework the driver to check for PBDE support via the PBDE feature bit in
COMMON_GET_SLI4_PARAMETERS.
Link: https://lore.kernel.org/r/20210707184351.67872-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mailbox commands sent via ioctl/bsg from user applications may be
interrupted from processing by a concurrently triggered PCI function
reset. The command will not generate a completion due to the reset. This
results in a user application hang waiting for the mailbox command to
complete.
Resolve by changing the function reset handler to detect that there was an
outstanding mailbox command and simulate a mailbox completion. Add some
additional debug when a mailbox command times out.
Link: https://lore.kernel.org/r/20210707184351.67872-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_offline_prep() an RPI is freed and nlp_rpi set to 0xFFFF before
calling lpfc_unreg_rpi(). Unfortunately, lpfc_unreg_rpi() uses nlp_rpi to
index the sli4_hba.rpi_ids[] array.
In lpfc_offline_prep(), unreg rpi before freeing the rpi.
Link: https://lore.kernel.org/r/20210707184351.67872-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the REG_LOGIN to the fabric controller happens in parallel with SCR,
it may or may not be completed by the time RDF is sent. RDF and SCR are
sent to the fabric in parallel, so checking for a completed REG_LOGIN in
the RDF submit path is not needed.
Remove the REG_LOGI check from the RDF submission path.
Link: https://lore.kernel.org/r/20210707184351.67872-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ELS job request structure, that is allocated while issuing ELS RDF/SCR
request path, is not being released in an error path causing a memory leak
message on driver unload.
Free the ELS job structure in the error paths.
Link: https://lore.kernel.org/r/20210707184351.67872-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
RDF ELS handling for NPIV ports may result in an incorrect NDLP reference
count. In the event of a persistent link down, this may lead to premature
release of an NDLP structure and subsequent NULL ptr dereference panic.
Remove extraneous lpfc_nlp_put() call in NPIV port RDF processing.
Link: https://lore.kernel.org/r/20210707184351.67872-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the routine that generically cleans up an ELS after completion, the NDLP
put is done prior to the freeing of the IOCB. The IOCB may reference the
NDLP.
Move the lpfc_nlp_put() after freeing the IOCB.
Link: https://lore.kernel.org/r/20210707184351.67872-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previous logic accidentally overrides the status variable to FAILURE when
target reset status is SUCCESS.
Refactor the non-SUCCESS logic of lpfc_vmid_vport_cleanup(), which resolves
the false override.
Link: https://lore.kernel.org/r/20210707184351.67872-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a LOGO is received for a node that is in the NPR state, post a DEVICE_RM
event to allow clean up of the logged out node.
Clearing the NLP_NPR_2B_DISC flag upon receipt of a LOGO ACC may cause
skipping of processing outstanding PLOGIs triggered by parallel RSCN
events. If an outstanding PLOGI is being retried and receipt of a LOGO ACC
occurs, then allow the discovery state machine's PLOGI completion to clean
up the node.
Link: https://lore.kernel.org/r/20210707184351.67872-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update comment headers for functions lpfc_vmid_cmd and lpfc_vmid_poll.
Link: https://lore.kernel.org/r/20210707184351.67872-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Define additional status fields in mailbox commands to help provide
additional information when downloading new firmware.
Link: https://lore.kernel.org/r/20210707184351.67872-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are instances when trace event logs are triggered from an interrupt
context. The trace event log may attempt to alloc memory causing scheduling
while atomic bug call traces.
Remove the need for the kmalloc'ed vport array when checking the
log_verbose flag, which eliminates the need for any allocation.
Link: https://lore.kernel.org/r/20210707184351.67872-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The NVMe support indicator in log message 6422 is displaying a field that
was initialized but never set to indicate NVMe support. Remove obsolete
nvme_support element from the lpfc_hba structure and change log message to
display NVMe support status as reported in SLI4 Config Parameters mailbox
command.
Link: https://lore.kernel.org/r/20210707184351.67872-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
flush_kernel_dcache_page() is not used by aacraid, and this header already
comes in through the scatterlist/block headers anyway.
Link: https://lore.kernel.org/r/20210712060928.4161649-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The continue statement at the end of the for-loop is redundant, remove it.
Link: https://lore.kernel.org/r/20210702131542.19880-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")
This fixes a bug found by Lv Yunlong where, because beiscsi_exec_nemb_cmd()
frees memory for the be_dma_mem cmd(), we can access freed memory when
beiscsi_if_clr_ip()/beiscsi_if_set_ip()'s call to beiscsi_exec_nemb_cmd()
fails and we access the freed req. This fixes the issue by having the
caller free the cmd's memory.
Link: https://lore.kernel.org/r/20210701190840.175120-1-michael.christie@oracle.com
Reported-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify if-else statement to return statement and remove code related to
CONFIG_SCSI_UFS_DWC that is not in use.
Link: https://lore.kernel.org/r/1891546521.01624860001810.JavaMail.epsvc@epcpadp3
Cc: Joao Pinto <jpinto@synopsys.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined.
- Fix 'perf test' problems related to the recently added hybrid (BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf test', should be
clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was
breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE),
breaking the build in some systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYPR8OgAKCRCyPKLppCJ+
J9vSAQDBCAvQiZQvOC8tgvUV8CIRorB/O43HOiX1pEUCVCdPRgEA0WGIbfjH3bMj
zYOpXRpDag5iAVvn3DmpJ38laXJexQI=
=0t/C
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
are offlined.
- Fix 'perf test' problems related to the recently added hybrid
(BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid
fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a
64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf
test', should be clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools'
linux/kconfig.h, which was breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long
sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
perf data: Close all files in close_dir()
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
perf trace: Free strings in trace__parse_events_option()
perf trace: Free syscall tp fields in evsel->priv
perf trace: Free syscall->arg_fmt
perf trace: Free malloc'd trace fields on exit
perf lzma: Close lzma stream on exit
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf script: Release zstd data
perf session: Cleanup trace_event
perf inject: Close inject.output on exit
perf report: Free generated help strings for sort option
perf env: Fix memory leak of cpu_pmu_caps
perf test maps__merge_in: Fix memory leak of maps
perf dso: Fix memory leak in dso__new_map()
perf test event_update: Fix memory leak of unit
perf test event_update: Fix memory leak of evlist
...
* Fix shrink eligibility checking when sparse inode clusters enabled.
* Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later.
* Don't report unusable extent size hints to FSGETXATTR.
* Don't warn when extent size hints are unusable because the sysadmin
configured them that way.
* Fix insufficient parameter validation in GROWFSRT ioctl.
* Fix integer overflow when adding rt volumes to filesystem.
-----BEGIN PGP SIGNATURE-----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=dKfy
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
* Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE.
* Fix assertion errors when using inlinedata files on gfs2.
-----BEGIN PGP SIGNATURE-----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=Vbt9
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"A handful of bugfixes for the iomap code.
There's nothing especially exciting here, just fixes for UBSAN (not
KASAN as I erroneously wrote in the tag message) warnings about
undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
reshuffling of per-page block state info to fix some problems with
gfs2.
- Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE
- Fix assertion errors when using inlinedata files on gfs2"
* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
iomap: Don't create iomap_page objects for inline files
iomap: Permit pages without an iop to enter writeback
iomap: remove the length variable in iomap_seek_hole
iomap: remove the length variable in iomap_seek_data
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
-----BEGIN PGP SIGNATURE-----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=7eEZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: Fix intiramfs script name
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
kbuild: do not suppress Kconfig prompts for silent build
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
Documentation was not changed when renaming the script in commit
80e715a06c ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.
Basically does:
$ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)
Fixes: 80e715a06c ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows
WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.
But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.
The problematic code is
+ $(foreach n, $(filter-out FORCE,$^), \
+ $(if $(wildcard $(n).symversions), \
+ ; cat $(n).symversions >> $@.symversions))
For example:
rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...
`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.
-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions
The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.
Thus fix this by use `test` shell command to check the file
existence in runtime.
Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]
Fixes: 38e8918490 ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
Fixes: 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
The commit 042da426f8 ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.
This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.
Fixes: 042da426f8 ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Before:
#perf sched record sleep 1
event syntax error: 'sched:sched_stat_wait'
\___ unknown tracepoint
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de23 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.
As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().
Before:
# perf probe -a schedule
schedule is out of .text, skip it.
Error: Failed to add events.
Solution:
Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.
After:
# perf.new.new probe -a schedule
Added new event:
probe:schedule (on schedule)
You can now use it in all perf tools, such as:
perf record -e probe:schedule -aR sleep 1
# perf probe -l
probe:schedule (on schedule@kernel/sched/core.c)
# perf record -e probe:schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
# perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1K of event 'probe:schedule'
# Event count (approx.): 1366
#
# Overhead Command Shared Object Symbol
# ........ ............... ................. ............
#
6.22% migration/0 [kernel.kallsyms] [k] schedule
6.22% migration/1 [kernel.kallsyms] [k] schedule
6.22% migration/2 [kernel.kallsyms] [k] schedule
6.22% migration/3 [kernel.kallsyms] [k] schedule
6.15% migration/10 [kernel.kallsyms] [k] schedule
6.15% migration/11 [kernel.kallsyms] [k] schedule
6.15% migration/12 [kernel.kallsyms] [k] schedule
6.15% migration/13 [kernel.kallsyms] [k] schedule
6.15% migration/14 [kernel.kallsyms] [k] schedule
6.15% migration/15 [kernel.kallsyms] [k] schedule
6.15% migration/4 [kernel.kallsyms] [k] schedule
6.15% migration/5 [kernel.kallsyms] [k] schedule
6.15% migration/6 [kernel.kallsyms] [k] schedule
6.15% migration/7 [kernel.kallsyms] [k] schedule
6.15% migration/8 [kernel.kallsyms] [k] schedule
6.15% migration/9 [kernel.kallsyms] [k] schedule
0.22% rcu_sched [kernel.kallsyms] [k] schedule
...
#
# (Cannot load tips.txt file, please install perf!)
#
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.
The problem is caused by the iterating variable never reaching 0.
Fixes: 1455206311 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
