Commit Graph

34 Commits

Author SHA1 Message Date
Nikolay Aleksandrov
9289906313 net: bridge: add notifications for the bridge dev on vlan change
Currently the bridge device doesn't generate any notifications upon vlan
modifications on itself because it doesn't use the generic bridge
notifications.
With the recent changes we know if anything was modified in the vlan config
thus we can generate a notification when necessary for the bridge device
so add support to br_ifinfo_notify() similar to how other combined
functions are done - if port is present it takes precedence, otherwise
notify about the bridge. I've explicitly marked the locations where the
notification should be always for the port by setting bridge to NULL.
I've also taken the liberty to rearrange each modified function's local
variables in reverse xmas tree as well.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:53:40 +09:00
Xin Long
fbb85b3c01 bridge: remove rtmsg_ifinfo called in add_del_if
Since commit dc709f3757 ("rtnetlink: bring NETDEV_CHANGEUPPER event
process back in rtnetlink_event"), rtnetlink_event would process the
NETDEV_CHANGEUPPER event and send a notification to userspace.

In add_del_if, it would generate NETDEV_CHANGEUPPER event by whether
netdev_master_upper_dev_link or netdev_upper_dev_unlink. There's
no need to call rtmsg_ifinfo to send the notification any more.

So this patch is to remove it from add_del_if also to avoid redundant
notifications.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25 10:54:39 +09:00
David Ahern
ca752be006 net: bridge: Pass extack to down to netdev_master_upper_dev_link
Pass extack arg to br_add_if. Add messages for a couple of failures
and pass arg to netdev_master_upper_dev_link.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 21:39:34 -07:00
Vincent Bernat
8701352b22 bridge: trigger RTM_NEWLINK when interface is modified by bridge ioctl
Currently, there is a difference in netlink events received when an
interface is modified through bridge ioctl() or through netlink. This
patch generates additional events when an interface is added to or
removed from a bridge via ioctl().

When adding then removing an interface from a bridge with netlink, we
get:

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
Deleted 5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

When using ioctl():

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
Deleted 5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

Without this patch, the last netlink notification is not sent.

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21 15:45:12 -07:00
David S. Miller
eccaa9e51b Revert "bridge: also trigger RTM_NEWLINK when interface is released from bridge"
This reverts commit 00ba4cb36d.

Discussion with David Ahern determined that this change is
actually not needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 15:39:59 -07:00
Vincent Bernat
00ba4cb36d bridge: also trigger RTM_NEWLINK when interface is released from bridge
Currently, when an interface is released from a bridge via
ioctl(), we get a RTM_DELLINK event through netlink:

Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 6e:23:c2:54:3a:b3

Userspace has to interpret that as a removal from the bridge, not as a
complete removal of the interface. When an bridged interface is
completely removed, we get two events:

Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 master bridge0 state DOWN
    link/ether 6e:23:c2:54:3a:b3
Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
    link/ether 6e:23:c2:54:3a:b3 brd ff:ff:ff:ff:ff:ff

In constrast, when an interface is released from a bond, we get a
RTM_NEWLINK with only the new characteristics (no master):

3: dummy1: <BROADCAST,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether ca:c8:7b:66:f8:25 brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff

Userland may be confused by the fact we say a link is deleted while
its characteristics are only modified. A first solution would have
been to turn the RTM_DELLINK event in del_nbp() into a RTM_NEWLINK
event. However, maybe some piece of userland is relying on this
RTM_DELLINK to detect when a bridged interface is released. Instead,
we also emit a RTM_NEWLINK event once the interface is
released (without master info).

Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 8a:bb:e7:94:b1:f8
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 8a:bb:e7:94:b1:f8 brd ff:ff:ff:ff:ff:ff

This is done only when using ioctl(). When using Netlink, such an
event is already automatically emitted in do_setlink().

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 14:07:40 -07:00
Nikolay Aleksandrov
f7cdee8a79 bridge: move to workqueue gc
Move the fdb garbage collector to a workqueue which fires at least 10
milliseconds apart and cleans chain by chain allowing for other tasks
to run in the meantime. When having thousands of fdbs the system is much
more responsive. Most importantly remove the need to check if the
matched entry has expired in __br_fdb_get that causes false-sharing and
is completely unnecessary if we cleanup entries, at worst we'll get 10ms
of traffic for that entry before it gets deleted.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06 22:53:13 -05:00
Linus Torvalds
7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
David S. Miller
e800072c18 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
In netdevice.h we removed the structure in net-next that is being
changes in 'net'.  In macsec.c and rtnetlink.c we have overlaps
between fixes in 'net' and the u64 attribute changes in 'net-next'.

The mlx5 conflicts have to do with vxlan support dependencies.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09 15:59:24 -04:00
Nikolay Aleksandrov
31ca0458a6 net: bridge: fix old ioctl unlocked net device walk
get_bridge_ifindices() is used from the old "deviceless" bridge ioctl
calls which aren't called with rtnl held. The comment above says that it is
called with rtnl but that is not really the case.
Here's a sample output from a test ASSERT_RTNL() which I put in
get_bridge_ifindices and executed "brctl show":
[  957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30)
[  957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G        W  O
4.6.0-rc4+ #157
[  957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[  957.423009]  0000000000000000 ffff880058adfdf0 ffffffff8138dec5
0000000000000400
[  957.423009]  ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32
0000000000000001
[  957.423009]  00007ffec1a444b0 0000000000000400 ffff880053c19130
0000000000008940
[  957.423009] Call Trace:
[  957.423009]  [<ffffffff8138dec5>] dump_stack+0x85/0xc0
[  957.423009]  [<ffffffffa05ead32>]
br_ioctl_deviceless_stub+0x212/0x2e0 [bridge]
[  957.423009]  [<ffffffff81515beb>] sock_ioctl+0x22b/0x290
[  957.423009]  [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700
[  957.423009]  [<ffffffff8126c159>] SyS_ioctl+0x79/0x90
[  957.423009]  [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1

Since it only reads bridge ifindices, we can use rcu to safely walk the net
device list. Also remove the wrong rtnl comment above.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05 23:32:30 -04:00
Xin Long
bf871ad792 bridge: a netlink notification should be sent when those attributes are changed by ioctl
Now when we change the attributes of bridge or br_port by netlink,
a relevant netlink notification will be sent, but if we change them
by ioctl or sysfs, no notification will be sent.

We should ensure that whenever those attributes change internally or from
sysfs/ioctl, that a netlink notification is sent out to listeners.

Also, NetworkManager will use this in the future to listen for out-of-band
bridge master attribute updates and incorporate them into the runtime
configuration.

This patch is used for ioctl.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 22:42:33 -04:00
Scott Feldman
c62987bbd8 bridge: push bridge setting ageing_time down to switchdev
Use SWITCHDEV_F_SKIP_EOPNOTSUPP to skip over ports in bridge that don't
support setting ageing_time (or setting bridge attrs in general).

If push fails, don't update ageing_time in bridge and return err to user.

If push succeeds, update ageing_time in bridge and run gc_timer now to
recalabrate when to run gc_timer next, based on new ageing_time.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 05:20:20 -07:00
Nikolay Aleksandrov
2dab80a8b4 bridge: fix br_stp_set_bridge_priority race conditions
After the ->set() spinlocks were removed br_stp_set_bridge_priority
was left running without any protection when used via sysfs. It can
race with port add/del and could result in use-after-free cases and
corrupted lists. Tested by running port add/del in a loop with stp
enabled while setting priority in a loop, crashes are easily
reproducible.
The spinlocks around sysfs ->set() were removed in commit:
14f98f258f ("bridge: range check STP parameters")
There's also a race condition in the netlink priority support that is
fixed by this change, but it was introduced recently and the fixes tag
covers it, just in case it's needed the commit is:
af615762e9 ("bridge: add ageing_time, stp_state, priority over netlink")

Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: 14f98f258f ("bridge: range check STP parameters")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-18 03:29:47 -07:00
tanxiaojun
31a5b837c2 bridge: add space before '(/{', after ',', etc.
Spaces required before the open parenthesis '(', before the open
brace '{', after that ',' and around that '?/:'.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 19:27:26 -05:00
Eric W. Biederman
cb99050305 net: Allow userns root to control the network bridge code.
Allow an unpriviled user who has created a user namespace, and then
created a network namespace to effectively use the new network
namespace, by reducing capable(CAP_NET_ADMIN) and
capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns,
CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls.

Allow setting bridge paramters via sysfs.

Allow all of the bridge ioctls:
BRCTL_ADD_IF
BRCTL_DEL_IF
BRCTL_SET_BRDIGE_FORWARD_DELAY
BRCTL_SET_BRIDGE_HELLO_TIME
BRCTL_SET_BRIDGE_MAX_AGE
BRCTL_SET_BRIDGE_AGING_TIME
BRCTL_SET_BRIDGE_STP_STATE
BRCTL_SET_BRIDGE_PRIORITY
BRCTL_SET_PORT_PRIORITY
BRCTL_SET_PATH_COST
BRCTL_ADD_BRIDGE
BRCTL_DEL_BRDIGE

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 20:33:00 -05:00
David S. Miller
1c01a80cfe Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/smsc911x.c
2011-04-11 13:44:25 -07:00
stephen hemminger
14f98f258f bridge: range check STP parameters
Apply restrictions on STP parameters based 802.1D 1998 standard.
   * Fixes missing locking in set path cost ioctl
   * Uses common code for both ioctl and sysfs

This is based on an earlier patch Sasikanth V but with overhaul.

Note:
1. It does NOT enforce the restriction on the relationship max_age and
   forward delay or hello time because in existing implementation these are
   set as independant operations.

2. If STP is disabled, there is no restriction on forward delay

3. No restriction on holding time because users use Linux code to act
   as hub or be sticky.

4. Although standard allow 0-255, Linux only allows 0-63 for port priority
   because more bits are reserved for port number.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 17:22:29 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
stephen hemminger
28a16c9796 bridge: change console message interface
Use one set of macro's for all bridge messages.

Note: can't use netdev_XXX macro's because bridge is purely
virtual and has no device parent.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:10:02 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Eric Dumazet
31ef30c760 bridge: remove dev_put() in add_del_if()
add_del_if() is called with RTNL, we can use __dev_get_by_index()
instead of [dev_get_by_index() + dev_put()]

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05 22:34:16 -08:00
David S. Miller
17dce5dfe3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	net/mac80211/mlme.c
2008-09-08 16:59:05 -07:00
Alexey Dobriyan
4aa678ba44 netns bridge: allow bridges in netns!
Bridge as netdevice doesn't cross netns boundaries.

Bridge ports and bridge itself live in same netns.

Notifiers are fixed.

netns propagated from userspace socket for setup and teardown.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Stephen Hemminger <shemming@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08 16:19:58 -07:00
Stephen Hemminger
8d4698f7a5 bridge: don't allow setting hello time to zero
Dushan Tcholich reports that on his system ksoftirqd can consume
between %6 to %10 of cpu time, and cause ~200 context switches per
second.

He then correlated this with a report by bdupree@techfinesse.com:

	http://marc.info/?l=linux-kernel&m=119613299024398&w=2

and the culprit cause seems to be starting the bridge interface.
In particular, when starting the bridge interface, his scripts
are specifying a hello timer interval of "0".

The bridge hello time can't be safely set to values less than 1
second, otherwise it is possible to end up with a runaway timer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08 13:46:54 -07:00
Adrian Bunk
0b04082995 net: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11 21:00:38 -07:00
Eric W. Biederman
881d966b48 [NET]: Make the device list and device lookups per namespace.
This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:10 -07:00
Pavel Emelianov
7562f876cd [NET]: Rework dev_base via list_head (v3)
Cleanup of dev_base list use, with the aim to simplify making device
list per-namespace. In almost every occasion, use of dev_base variable
and dev->next pointer could be easily replaced by for_each_netdev
loop. A few most complicated places were converted to using
first_netdev()/next_netdev().

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03 15:13:45 -07:00
Stephen Hemminger
9cde070874 bridge: add support for user mode STP
This patchset based on work by Aji_Srinivas@emc.com provides allows
spanning tree to be controled from userspace.  Like hotplug, it
uses call_usermodehelper when spanning tree is enabled so there
is no visible API change. If call to start usermode STP fails
it falls back to existing kernel STP.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-04-25 22:28:48 -07:00
Stephen Hemminger
6548cda289 [BRIDGE]: Fix locking of set path cost.
This change goes with earlier change to get rid of
work queue for path cost. Now stp_set_path_cost does its own
locking. This is to allow it to call br_path_cost() which calls
ethtool interfaces (might sleep).

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-28 09:42:12 -08:00
YOSHIFUJI Hideaki
9d6f229fc4 [NET] BRIDGE: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:23 -08:00
Chris Wright
ba8379b220 [PATCH] bridge: fix possible overflow in get_fdb_entries
Make sure to properly clamp maxnum to avoid overflow

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Eugene Teo <eteo@redhat.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-28 17:26:50 -08:00
Panagiotis Issaris
0da974f4f3 [NET]: Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:51:30 -07:00
Randy Dunlap
4fc268d24c [PATCH] capable/capability.h (net/)
net: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:14 -08:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00