Commit Graph

13382 Commits

Author SHA1 Message Date
Linus Torvalds
8898159650 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
 - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on
   Kaffeine (Fedora 16 Bugzilla #812895);
 - Fixes a mutex unlock at an error condition at drx-k;
 - Fix winbond-cir set mode;
 - mt9m032: Fix a compilation breakage with some random Kconfig;
 - mt9m032: fix two dead locks;
 - xc5000: don't require an special firmware (that won't be provided by
   the vendor) just because the xtal frequency is different;
 - V4L DocBook: fix some typos at multi-plane formats description.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
  [media] V4L: mt9m032: fix compilation breakage
  [media] V4L: DocBook: Fix typos in the multi-plane formats description
  [media] V4L: mt9m032: fix two dead-locks
  [media] rc-core: set mode for winbond-cir
  [media] drxk: Does not unlock mutex if sanity check failed in scu_command()
  [media] dvb_frontend: Fix a regression when switching back to DVB-S
2012-04-21 12:43:23 -07:00
Michael Krufky
e631f57804 [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
Rather than loading firmware specific for the xtal frequency, just use
the standard firmware and set the xtal frequency after firmware upload.

The modified firmware will never be released, so we're better off
merging this now rather than waiting for v3.5.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 16:13:15 -03:00
Guennadi Liakhovetski
18311c5395 [media] V4L: mt9m032: fix compilation breakage
Fix the following compilation failure:

linux-2.6/drivers/media/video/mt9m032.c: In function '__mt9m032_get_pad_crop':
linux-2.6/drivers/media/video/mt9m032.c:337: error: implicit declaration of function 'v4l2_subdev_get_try_crop'
linux-2.6/drivers/media/video/mt9m032.c:337: warning: return makes pointer from integer without a cast
linux-2.6/drivers/media/video/mt9m032.c: In function '__mt9m032_get_pad_format':
linux-2.6/drivers/media/video/mt9m032.c:359: error: implicit declaration of function 'v4l2_subdev_get_try_format'
linux-2.6/drivers/media/video/mt9m032.c:359: warning: return makes pointer from integer without a cast
linux-2.6/drivers/media/video/mt9m032.c: In function 'mt9m032_probe':
linux-2.6/drivers/media/video/mt9m032.c:767: error: 'struct v4l2_subdev' has no member named 'entity'
linux-2.6/drivers/media/video/mt9m032.c:826: error: 'struct v4l2_subdev' has no member named 'entity'
linux-2.6/drivers/media/video/mt9m032.c: In function 'mt9m032_remove':
linux-2.6/drivers/media/video/mt9m032.c:842: error: 'struct v4l2_subdev' has no member named 'entity'
make[4]: *** [drivers/media/video/mt9m032.o] Error 1

by adding a dependency on VIDEO_V4L2_SUBDEV_API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 15:39:07 -03:00
Guennadi Liakhovetski
cd90491bcd [media] V4L: mt9m032: fix two dead-locks
Fix a copy-paste typo and a nested locking function call in mt9m032.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 09:04:09 -03:00
David Härdeman
d9b786955f [media] rc-core: set mode for winbond-cir
Setting the correct mode is required by rc-core or scancodes won't be
generated (which isn't very user-friendly).

This one-line fix should be suitable for 3.4-rc2.

Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18 11:18:48 -03:00
Alexey Khoroshilov
e4459e1682 [media] drxk: Does not unlock mutex if sanity check failed in scu_command()
If sanity check fails in scu_command(), goto error leads to unlock of
an unheld mutex. The check should not fail in reality, but it nevertheless
worth fixing.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18 11:04:28 -03:00
Mauro Carvalho Chehab
3626479e48 [media] dvb_frontend: Fix a regression when switching back to DVB-S
There are some softwares (Kaffeine and likely xine) that uses a
DVBv5 call to switch to DVB-S2, but expects that a DVBv3 call to
switch back to DVB-S. Well, this is not right, as a DVBv3 call
doesn't know anything about delivery systems.

However, as, by accident, this used to work, we need to restore its
behavior, in order to avoid regressions with those softwares.

Reported on this Fedora 16 bugzilla:
	https://bugzilla.redhat.com/show_bug.cgi?id=812895

Reported-by: Dieter Roever <Dieter.Roever@gmx.de>
Cc: stable@kernel.org # for version 3.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18 11:03:18 -03:00
Linus Torvalds
39f86a608a Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:

 - dvb core: there is a regression found when used with xine.  For
   whatever unknown reason, xine (and xine-lib clients) wants that the
   frontend to tell what frequency he is using even before the PLL lock
   (or at least, it expects a non-zero frequency).

   On DVB, the frequency is only actually known after a frequency
   zig-zag seek, done by the DVB core.  Anyway, the fix was trivial.
   That solves Fedora BZ#808871.

 - ivtv: fix a regression when selecting the language channel

 - uvc: fix a race-related crash

 - it913x: fixes firmware loading

 - two trivial patches (a dependency issue at a radio driver at sound
   Kconfig, and a warning fix on dvb).

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] uvcvideo: Fix race-related crash in uvc_video_clock_update()
  [media] Drivers/media/radio: Fix build error
  [media] dvb_frontend: fix compiler warning
  [media] it913x: fix firmware loading errors
  [media] ivtv: Fix AUDIO_(BILINGUAL_)CHANNEL_SELECT regression
  [media] dvb_frontend: regression fix: userspace ABI broken for xine
2012-04-11 11:05:34 -07:00
Laurent Pinchart
ed0ee0ce0a [media] uvcvideo: Fix race-related crash in uvc_video_clock_update()
The driver frees the clock samples buffer before stopping the video
buffers queue. If a DQBUF call arrives in-between,
uvc_video_clock_update() will be called with a NULL clock samples
buffer, leading to a crash. This occurs very frequently when using the
webcam with the flash browser plugin.

Move clock initialization/cleanup to uvc_video_enable() in order to free
the clock samples buffer after the queue is stopped. Make sure the clock
is reset at resume time to avoid miscalculating timestamps.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 10:15:28 -03:00
Hans Petter Selasky
c065f5b4ee [media] dvb_frontend: fix compiler warning
has_get_frontend() should return a boolean, not a pointer.

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:42:11 -03:00
Malcolm Priestley
4da2876614 [media] it913x: fix firmware loading errors
On some systems the device does not respond or give obscure values after cold,
warm or firmware reboot.

This patch retries to get chip version and type 5 times. If it
fails it applies chip version 0x1 and type 0x9135.

This patch does not fix warm cycle problems from other operating
systems and indeed the reverse applies. Users should power off cold boot.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:42:10 -03:00
Hans Verkuil
bc169e35e3 [media] ivtv: Fix AUDIO_(BILINGUAL_)CHANNEL_SELECT regression
When I converted ivtv to the new decoder API I introduced a regression in the
support of the old channel select API.

Thanks to Martin Dauskardt for reporting this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:41:54 -03:00
Chris Rankin
556a0442e0 [media] dvb_frontend: regression fix: userspace ABI broken for xine
The commit e399ce77e6 has broken the DVB ABI for xine:

The problem is that xine is expecting every event after a successful
FE_SET_FRONTEND ioctl to have a non-zero frequency parameter, regardless
of whether the tuning process has LOCKed yet. What used to happen is
that the events inherited the initial tuning parameters from the
FE_SET_FRONTEND call. However, the fepriv->parameters_out struct is now
not initialised until the status contains the FE_HAS_LOCK bit.

You might argue that this behaviour is intentional, except that if an
application other than xine uses the DVB adapter and manages to set the
parameters_out.frequency field to something other than zero, then xine
no longer has any problems until either the adapter is replugged or the
kernel modules reloaded. This can only mean that the
fepriv->parameters_out struct still contains the (stale) tuning
information from the previous application.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Cc: stable@kernel.org # for kernel version 3.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:41:34 -03:00
Linus Torvalds
820d41cf0c ARM: cleanups of io includes
Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes,
 moving some of the oft-repeated macros to a common location and removing a bunch of
 boiler plate. This is another step closer to a common zImage for multiple platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPcpqHAAoJEIwa5zzehBx3xCMP/2evrPQyorzMBztrFB4Ry9Ol
 qNkSVNsemZjdtkY2dnJv+zJ/Xb0PPDU9EuBHr/SpqmVrRZEZeJND42wZK/OTFCBZ
 Ufi7KP1qE30daO5H3YmL+58/Ixir5fTHqggqolHhTcEYU2hnHgLBI4rIFu92kSO7
 TMyrAUs14jSkTVZc6HSF83w3PfQWhMzWvspJVHQ6RebZRruETAr7v9weVMbgxcDk
 jQ5XJ9y73rGs2AF8bZTpUdFPzkcac7UiHn3/XyqoZs8RNCL98BGpskzhILyTARf5
 X90c9mqQF+AEbb9QSDDd52uYFsJ/5COJvWdlExRI9gZZDI8Pd05ijZBR9IdGJg/B
 NsVsl98wvZ/zjHJ/Sb2qt5ruet7PiQUGhkshB42jVHsaWfRM030sKGYxQ8pX5Tsa
 cSagnfBCvAZ9VjDLkXrnEbWRNTz8LSwn9l63z0jmtm5D8+vbpMtgvtWARtuZ4RNn
 D8wIWoyT0ytVZnosu5441TEgCejtcKOEFzThvKDYMeMJZ/rqVkAbcznapoC2qUd4
 fceNlLfQFvW7xpY1MY8mhlwC0ki4hM9MSDieaXUyefvAU/hoSp8MveVUH5UspYfb
 0FpkEhzklW/g0/fuq0DJQIrMn7dajjUvVZIUQtiVQuFHOr6RUbFG5vmXuCbAyx10
 PE2K4rnKz+PC8bKab7v9
 =YIsn
 -----END PGP SIGNATURE-----

Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: cleanups of io includes" from Olof Johansson:
 "Rob Herring has done a sweeping change cleaning up all of the
  mach/io.h includes, moving some of the oft-repeated macros to a common
  location and removing a bunch of boiler plate.  This is another step
  closer to a common zImage for multiple platforms."

Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: tegra: Include assembler.h in sleep.S to fix build break
  ARM: pxa: use common IOMEM definition
  ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
  ARM: __io abuse cleanup
  ARM: create a common IOMEM definition
  ARM: iop13xx: fix missing declaration of iop13xx_init_early
  ARM: fix ioremap/iounmap for !CONFIG_MMU
  ARM: kill off __mem_pci
  ARM: remove bunch of now unused mach/io.h files
  ARM: make mach/io.h include optional
  ARM: clps711x: remove unneeded include of mach/io.h
  ARM: dove: add explicit include of dove.h to addr-map.c
  ARM: at91: add explicit include of hardware.h to uncompressor
  ARM: ep93xx: clean-up mach/io.h
  ARM: tegra: clean-up mach/io.h
  ARM: orion5x: clean-up mach/io.h
  ARM: davinci: remove unneeded mach/io.h include
  [media] davinci: remove includes of mach/io.h
  ARM: OMAP: Remove remaining includes for mach/io.h
  ARM: msm: clean-up mach/io.h
  ...
2012-03-29 18:02:10 -07:00
Linus Torvalds
ef08e78268 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...
2012-03-29 15:34:57 -07:00
Linus Torvalds
0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells
9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds
e317234975 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...
2012-03-23 14:39:09 -07:00
Linus Torvalds
9f3938346a Merge branch 'kmap_atomic' of git://github.com/congwang/linux
Pull kmap_atomic cleanup from Cong Wang.

It's been in -next for a long time, and it gets rid of the (no longer
used) second argument to k[un]map_atomic().

Fix up a few trivial conflicts in various drivers, and do an "evil
merge" to catch some new uses that have come in since Cong's tree.

* 'kmap_atomic' of git://github.com/congwang/linux: (59 commits)
  feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal
  highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
  drbd: remove the second argument of k[un]map_atomic()
  zcache: remove the second argument of k[un]map_atomic()
  gma500: remove the second argument of k[un]map_atomic()
  dm: remove the second argument of k[un]map_atomic()
  tomoyo: remove the second argument of k[un]map_atomic()
  sunrpc: remove the second argument of k[un]map_atomic()
  rds: remove the second argument of k[un]map_atomic()
  net: remove the second argument of k[un]map_atomic()
  mm: remove the second argument of k[un]map_atomic()
  lib: remove the second argument of k[un]map_atomic()
  power: remove the second argument of k[un]map_atomic()
  kdb: remove the second argument of k[un]map_atomic()
  udf: remove the second argument of k[un]map_atomic()
  ubifs: remove the second argument of k[un]map_atomic()
  squashfs: remove the second argument of k[un]map_atomic()
  reiserfs: remove the second argument of k[un]map_atomic()
  ocfs2: remove the second argument of k[un]map_atomic()
  ntfs: remove the second argument of k[un]map_atomic()
  ...
2012-03-21 09:40:26 -07:00
Alexandre Bounine
16052827d9 dmaengine/dma_slave: introduce inline wrappers
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic()
interfaces to hide new parameter from current users of affected interfaces.
Convert current users to use new wrappers instead of direct calls.
Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269].

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21 19:20:22 +05:30
Linus Torvalds
69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Linus Torvalds
4a52246302 driver core merge for 3.4-rc1
Here's the big driver core merge for 3.4-rc1.
 
 Lots of various things here, sysfs fixes/tweaks (with the nlink breakage
 reverted), dynamic debugging updates, w1 drivers, hyperv driver updates,
 and a variety of other bits and pieces, full information in the
 shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9neCsACgkQMUfUDdst+ylyQwCfY2eizvzw5HhjQs8gOiBRDADe
 yrgAnj1Zan2QkoCnQIFJNAoxqNX9yAhd
 =biH6
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches for 3.4-rc1 from Greg KH:
 "Here's the big driver core merge for 3.4-rc1.

  Lots of various things here, sysfs fixes/tweaks (with the nlink
  breakage reverted), dynamic debugging updates, w1 drivers, hyperv
  driver updates, and a variety of other bits and pieces, full
  information in the shortlog."

* tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits)
  Tools: hv: Support enumeration from all the pools
  Tools: hv: Fully support the new KVP verbs in the user level daemon
  Drivers: hv: Support the newly introduced KVP messages in the driver
  Drivers: hv: Add new message types to enhance KVP
  regulator: Support driver probe deferral
  Revert "sysfs: Kill nlink counting."
  uevent: send events in correct order according to seqnum (v3)
  driver core: minor comment formatting cleanups
  driver core: move the deferred probe pointer into the private area
  drivercore: Add driver probe deferral mechanism
  DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
  w1_bq27000: Only one thread can access the bq27000 at a time.
  w1_bq27000 - remove w1_bq27000_write
  w1_bq27000: remove unnecessary NULL test.
  sysfs: Fix memory leak in sysfs_sd_setsecdata().
  intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
  w1: Fix w1_bq27000
  driver-core: documentation: fix up Greg's email address
  powernow-k6: Really enable auto-loading
  powernow-k7: Fix CPU family number
  ...
2012-03-20 11:16:20 -07:00
Cong Wang
b0b38c767e media: remove the second argument of k[un]map_atomic()
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:18 +08:00
Mauro Carvalho Chehab
795cb41c88 [media] partially reverts changeset fa5527c
This patch is applying some hunks that are already at changeset
c247d7b, causing a compilation breakage.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 23:10:13 -03:00
Klaus Schmidinger
0e377819b9 [media] stb0899: fix the limits for signal strength values
stb0899: fix the limits for signal strength values

stb0899_read_signal_strength() adds an offset to the result of the table lookup.
That offset must correspond to the lowest value in the lookup table, to make sure
the result doesn't get below 0, which would mean a "very high" value since the
parameter is unsigned.
'strength' and 'snr' need to be initialized to 0 to make sure they have a
defined result in case there is no "internal->lock".

Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 23:06:40 -03:00
Ivan Kalvachev
fa5527cd3f [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
It is mostly copy/paste of the 520e code with setting GPIO7 removed
(no LED light).

I've worked on just released vanilla linux-3.3.0 kernel, so there may
be 1/2 lines offset to the internal working source, but most of the
code should apply cleanly.

I was able to get the DVB-C working (tuned and watched TV). Haven't
tested DVB-T (no signal atm).

Special thanks to everybody who worked on the code and to Antti
Palosaari and Devin Heitmueller who provided essential support on irc.

Hardware is based of:
Empia EM2884
Micronas DRX 3926K
NXP TDA18271HDC2
AVF4910 (not used atm)

Signed-off-by: Ivan Kalvachev <ikalvachev@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:44:46 -03:00
Antti Palosaari
c247d7b107 [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
Hardware is based of:
Empia EM2884
Micronas DRX 3926K
NXP TDA18271HDC2

... + analog parts.
Analog is not supported currently. Only DVB-T and DVB-C.

There seems to be still	problems for locking DVB-C channels which have
strong signal. Attenuator helps. I think it is demodulator IF/RF AGC
issue. Lets fix it later. Patches are welcome.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:38:53 -03:00
Hans Verkuil
02bbb814d8 [media] -EINVAL -> -ENOTTY
I found one more place where -EINVAL is used instead of -ENOTTY:

Note that drivers/media/dvb/dvb-core/dvbdev.c has the same code, but as far as
I can tell DVB is still using -EINVAL for unknown ioctls so I didn't change
that.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:36:13 -03:00
Jean-François Moine
ff38d58ec0 [media] gspca - sn9c20x: Cleanup source
- copyright change
- use the kbuild module name for messages
- remove useless code
- add/remove blank lines, parenthesis, braces
- add/change some information messages

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:32:35 -03:00
Jean-François Moine
ccbaba4302 [media] gspca - sn9c20x: Simplify register write for capture start/stop
The bridge register 1061 may take only the values 01 (stop) or 03 (start).

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:32:00 -03:00
Jean-François Moine
92dcffcf20 [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
The JPEG compression may be adjusted from the packet fill ratio and from
the flag 'USB FIFO full' returned in each frame.
The code is adapted from the one in gspca sonixj and uses a workqueue.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:31:46 -03:00
Jean-François Moine
e71389be3d [media] gspca - sn9c20x: Greater delay in case of sensor no response
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:31:06 -03:00
Jean-François Moine
d4689b7404 [media] gspca - sn9c20x: Optimize the code of write sequences
The new functions i2c_w1_buf() and i2c_w2_buf() handle the write loops.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:30:48 -03:00
Jean-François Moine
4c632e4e51 [media] gspca - sn9c20x: Add the JPEG compression quality control
The JPEG compression quality was hardcoded to 95%. This value was too big,
raising often buffer overflows.
This quality is now 80% by default and is settable.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:30:20 -03:00
Jean-François Moine
92884f80b7 [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
The reset of the Omnivision sensors takes a long time (200ms).

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:29:52 -03:00
Jean-François Moine
fe86ec75b9 [media] gspca - sn9c20x: Propagate USB errors to higher level
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:29:11 -03:00
Jean-François Moine
c5224d81ae [media] gspca - sn9c20x: Use the new video control mechanism
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:28:44 -03:00
Jean-François Moine
1f42df0db0 [media] gspca - sn9c20x: Fix loss of frame start
The frame header was checked on packets of size 64 bytes only, while the webcams
may put a frame header at the beginning of bigger packets.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:27:27 -03:00
Jean-François Moine
a2816edaac [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
The line defining the value of the register 08 for the sensor cs2102k was
commented by error in commit 30c73d46.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:27:15 -03:00
Jose Alberto Reguero
d9ef28a915 [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
This patch adds brightness control to the OmniVision 5621 sensor.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:27:01 -03:00
Jean-François Moine
cd7f98fcd8 [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
This patch is adapted from Sylwester's patch proposed on 2012/02/22.
The JPEG compression control does not work with the autoquality done for the
sensors hv7131r and pas202b.

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:26:45 -03:00
Michael Krufky
9ab2393fc3 [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
The D1F5 revision of the WinTV HVR-1900 uses a tda18271c2 tuner
instead of a tda18271c1 tuner as used in revision D1E9. To
account for this, we must hardcode the frontend configuration
to use the same IF frequency configuration for both revisions
of the device.

6MHz DVB-T is unaffected by this issue, as the recommended
IF Frequency configuration for 6MHz DVB-T is the same on both
c1 and c2 revisions of the tda18271 tuner.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: Mike Isely <isely@pobox.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:26:01 -03:00
Michael Krufky
3be5bb71fb [media] mxl111sf: fix error on stream stop in mxl111sf_ep6_streaming_ctrl()
Remove unnecessary register access in mxl111sf_ep6_streaming_ctrl()

This code breaks driver operation in kernel 3.3 and later, although
it works properly in 3.2  Disable register access to 0x12 for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:24:40 -03:00
Antti Palosaari
3553085cb4 [media] em28xx: support for 1b80:e425 MaxMedia UB425-TC
Hardware is based of:
Empia EM2874B
Micronas DRX 3913KA2
NXP TDA18271HDC2

Only DVB-C supported currently since missing firmware.
According to my tests, DRX 3913KA2 demodulator requires firmware
in order to support DVB-T mode.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:22:53 -03:00
Jonathan Corbet
67de3311a0 [media] marvell-cam: Demote the "release" print to debug level
We've spammed enough logfiles at this point.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:17:06 -03:00
Jonathan Corbet
4a0abfaa96 [media] mmp-camera: Don't power up the sensor on resume
We still need to power up the controller to avoid unsightly self-immolation
should something try to access its registers, but the sensor can stay
powered down unless the camera was actually operating at suspend time.
This gets rid of the camera LED flash on resume, fixing OLPC bug #11644.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:16:46 -03:00
Jonathan Corbet
f2354dd180 [media] marvell-cam: Don't signal multiple frame completions in scatter/gather mode
There is only one frame known to the DMA engine in scatter/gather mode, but
it still tells us that any or all of frames 1-3 are done at each completion
interrupt.  Avoid the creation of junk frames by being sure to only
"complete" one on each interrupt.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:16:29 -03:00
Jonathan Corbet
121bbe254a [media] marvell-cam: fix the green screen of death
I had learned through hard experience that dinking around with the DMA
descriptors while the C1_DESC_ENA enable bit was set is a recipe for all
kinds of truly malicious behavior on the hardware's part, regardless of
whether the DMA engine is actually operating at the time.  That
notwithstanding, the driver did so dink, resulting in "green frame"
captures and the death of the system in random, spectacular ways.

Move the tweaking of C1_DESC_ENA to the same function that sets the
descriptor so we know that we'll never try to set a descriptor while that
bit is set.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:16:19 -03:00
Jonathan Corbet
482d35c41f [media] marvell-cam: Increase the DMA shutdown timeout
Experience shows that, on the Armada platform, it can take as much as 120ms
for the DMA engine to actually shut down after it has been told to.  So a
40ms timeout is not adequate; use 150ms instead.  Also make sure we don't
leave the DMA_ACTIVE flag set once things are down.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:15:51 -03:00
Jonathan Corbet
0770d07f7b [media] marvell-cam: Remove broken "owner" logic
The marvell cam driver retained just enough of the owner-tracking logic
from cafe_ccic to be broken; it could, conceivably, cause the driver to
release DMA memory while the controller is still active.  Simply remove the
remaining pieces and ensure that the controller is stopped before we free
things.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 22:15:29 -03:00