The DRM drivers i915, nouveau and radeon may be compiled with
CONFIG_ACPI not set, in which case acpi_dev_present() is undefined.
Add a no-op stub for apple_gmux_present() which is used if
CONFIG_APPLE_GMUX is not enabled to avoid build breakage.
(CONFIG_APPLE_GMUX depends on CONFIG_ACPI.)
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160210131741.GA15492@wunner.de
For dumb buffers, we need to transfer them to the host when updating a
plane.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes drawing updates when updating planes with atomic API.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When using the atomic API, plane->fb is not set when calling
virtio_gpu_plane_atomic_update. Use plane->state->fb instead.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull upstream HDLCD driver.
* git://linux-arm.org/linux-ld:
MAINTAINERS: Add Liviu Dudau as maintainer for ARM HDLCD driver.
drm: Add support for ARM's HDLCD controller.
In case CONFIG_DRM_AMD_POWERPLAY is defined and amdgpu.powerplay=0.
some functions in powrplay can also be called by DAL. and the input parameter is *adev.
if just check point not NULL was not enough and will lead to NULL point error.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <eric.yang2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use min required system clock calculated by dal
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Rokhvarg <David.Rokhvarg@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd_pp_dal_clock_info to amd_pp_simple_clock_info.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prior actual MMIO flip we need to acquire DAL mutex to guard
our target state which get modified on reset mode.
Assign page flip status before actual flip to handle
the possible race condition with interrupt.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need this in userspace for interpreting some of the perf ctrs.
Note possibly not quite sufficient if we had some frequency mgmt
approach other than race-to-idle. Not really sure what the best
thing to do if we did. Although displaying results as a percentage
of max frequence seems sensible(ish) if we did.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No need to keep that for every IB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the IB test for GPU resets as well and
the scheduler should be stoped then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the IB test for GPU resets as well and
the scheduler should be stoped then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That's probably a better matching name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a job_alloc_with_ib helper and proper job submission.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no point in sending them through the scheduler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't submit to multiple rings at the same time anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The padding depends on the firmware version and we need that for BO moves as
well, not only for VM updates.
v2: new approach of making pad_ib a ring function
v3: fix typo in macro name
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't keep that around twice.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And use them in the CS instead of allocating IBs and jobs separately.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Specifying no IBs on command submission is invalid, stop crashing
badly when somebody tries it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just a leftover from semaphores.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just leftovers from the semaphores.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of when we try to bind it check the usermm when
we try to use it in the IOCTLs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
When the radeon driver resets a gpu, it attempts to test whether all the
rings can successfully handle an IB. If these rings fail to respond, the
process will wait forever. Another gpu reset can't happen at this point,
as the current reset holds a lock required to do so. Instead, make all
the IB tests run with a timeout, so the system can attempt to recover
in this case.
While this doesn't fix the underlying issue with card resets failing, it
gives the system a higher chance of recovering. These timeouts have been
confirmed to help both a Tathi and Hawaii card recover after a gpu reset.
This also adds a new function, radeon_fence_wait_timeout, that behaves like
fence_wait_timeout. It is used instead of fence_wait_timeout as it continues
to work during a reset. radeon_fence_wait is changed to be implemented
using this function.
V2:
- Changed the timeout to 1s, as the default 10s from radeon_wait_timeout was
too long. A timeout of 100ms was tested and found to be too short.
- Changed radeon_fence_wait_timeout to behave more like fence_wait_timeout.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move that out of the main IOCTL function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And use it in UVD/VCE command patching.
v2: squash in Christian's fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need a few dw here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VBIOS does this for us in asic_init.
v2: update iceland as well
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VBIOS does this for us in asic_init.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generally a good idea between VM sessions. We need a way to
detect VM pass-through in general and always run asic_init in
that case.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required to make desicions about certain code pathes.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This table is found on boards that support SR-IOV. This will
be used to determine if the board supports SR-IOV and allow
the driver to take specific action in certain cases.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_boot_test_post_card() is not used anywhere. Probably
a leftover from the original port from radeon.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACP IP have internal DMA controller, DW I2S controller and DSPs
as separate power tiles. DMA and I2S devices are added to generic
pm domain, so that entire IP can be powered off/on at appropriate
times. Unused DSPs are made to be powered off though they are powered
on during ACP pm domain power on sequence.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds the ACP (Audio CoProcessor) IP driver and wires
it up to the amdgpu driver. The ACP block provides the DMA
engine for i2s based ALSA driver. This is required for audio
on APUs that utilize an i2s codec.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Murali Krishna Vemuri <murali-krishna.vemuri@amd.com>
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That works with other values as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't calculate the end address multiple times.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
