Use PAGE_ALIGNED macro instead of IS_ALIGNED and passing PAGE_SIZE.
Link: https://lkml.kernel.org/r/20220520021833.121405-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By printing information, we can friendly prompt the status change
information of kfence by dmesg and record by syslog.
Also, set kfence_enabled to false only when needed.
Link: https://lkml.kernel.org/r/20220518073105.3160335-1-liu.yun@linux.dev
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Co-developed-by: Marco Elver <elver@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Out-of-bounds accesses that aren't caught by a guard page will result in
corruption of canary memory. In pathological cases, where an object has
certain alignment requirements, an out-of-bounds access might never be
caught by the guard page. Such corruptions, however, are only detected on
kfree() normally. If the bug causes the kernel to panic before kfree(),
KFENCE has no opportunity to report the issue. Such corruptions may also
indicate failing memory or other faults.
To provide some more information in such cases, add the option to check
canary bytes on panic. This might help narrow the search for the panic
cause; but, due to only having the allocation stack trace, such reports
are difficult to use to diagnose an issue alone. In most cases, such
reports are inactionable, and is therefore an opt-in feature (disabled by
default).
[akpm@linux-foundation.org: add __read_mostly, per Marco]
Link: https://lkml.kernel.org/r/20220425022456.44300-1-huangshaobo6@huawei.com
Signed-off-by: huangshaobo <huangshaobo6@huawei.com>
Suggested-by: chenzefeng <chenzefeng2@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Wangbing <wangbing6@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been
producing garbage data due to the object not actually being maintained
by SLAB or SLUB.
Fix this by implementing __kfence_obj_info() that copies relevant
information to struct kmem_obj_info when the object was allocated by
KFENCE; this is called by a common kmem_obj_info(), which also calls the
slab/slub/slob specific variant now called __kmem_obj_info().
For completeness, kmem_dump_obj() now displays if the object was
allocated by KFENCE.
Link: https://lore.kernel.org/all/20220323090520.GG16885@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20220406131558.3558585-1-elver@google.com
Fixes: b89fb5ef0c ("mm, kfence: insert KFENCE hooks for SLUB")
Fixes: d3fb45f370 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz> [slab]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the kfence object is allocated to be used for objects vector, then
this slot of the pool eventually being occupied permanently since the
vector is never freed. The solutions could be (1) freeing vector when
the kfence object is freed or (2) allocating all vectors statically.
Since the memory consumption of object vectors is low, it is better to
chose (2) to fix the issue and it is also can reduce overhead of vectors
allocating in the future.
Link: https://lkml.kernel.org/r/20220328132843.16624-1-songmuchun@bytedance.com
Fixes: d3fb45f370 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow the use of a deferrable timer, which does not force CPU wake-ups
when the system is idle. A consequence is that the sample interval
becomes very unpredictable, to the point that it is not guaranteed that
the KFENCE KUnit test still passes.
Nevertheless, on power-constrained systems this may be preferable, so
let's give the user the option should they accept the above trade-off.
Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_KFENCE_NUM_OBJECTS is set to a big number, kfence
kunit-test-case test_gfpzero will eat up nearly all the CPU's resources
and rcu_stall is reported as the following log which is cut from a
physical server.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 68-....: (14422 ticks this GP) idle=6ce/1/0x4000000000000002
softirq=592/592 fqs=7500 (t=15004 jiffies g=10677 q=20019)
Task dump for CPU 68:
task:kunit_try_catch state:R running task
stack: 0 pid: 9728 ppid: 2 flags:0x0000020a
Call trace:
dump_backtrace+0x0/0x1e4
show_stack+0x20/0x2c
sched_show_task+0x148/0x170
...
rcu_sched_clock_irq+0x70/0x180
update_process_times+0x68/0xb0
tick_sched_handle+0x38/0x74
...
gic_handle_irq+0x78/0x2c0
el1_irq+0xb8/0x140
kfree+0xd8/0x53c
test_alloc+0x264/0x310 [kfence_test]
test_gfpzero+0xf4/0x840 [kfence_test]
kunit_try_run_case+0x48/0x20c
kunit_generic_run_threadfn_adapter+0x28/0x34
kthread+0x108/0x13c
ret_from_fork+0x10/0x18
To avoid rcu_stall and unacceptable latency, a schedule point is
added to test_gfpzero.
Link: https://lkml.kernel.org/r/20220309083753.1561921-4-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kunit: fix a UAF bug and do some optimization", v2.
This series is to fix UAF (use after free) when running kfence test case
test_gfpzero, which is time costly. This UAF bug can be easily triggered
by setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Furthermore, some
optimization for kunit tests has been done.
This patch (of 3):
Kunit will create a new thread to run an actual test case, and the main
process will wait for the completion of the actual test thread until
overtime. The variable "struct kunit test" has local property in function
kunit_try_catch_run, and will be used in the test case thread. Task
kunit_try_catch_run will free "struct kunit test" when kunit runs
overtime, but the actual test case is still run and an UAF bug will be
triggered.
The above problem has been both observed in a physical machine and qemu
platform when running kfence kunit tests. The problem can be triggered
when setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Under this setting, the
test case test_gfpzero will cost hours and kunit will run to overtime.
The follows show the panic log.
BUG: unable to handle page fault for address: ffffffff82d882e9
Call Trace:
kunit_log_append+0x58/0xd0
...
test_alloc.constprop.0.cold+0x6b/0x8a [kfence_test]
test_gfpzero.cold+0x61/0x8ab [kfence_test]
kunit_try_run_case+0x4c/0x70
kunit_generic_run_threadfn_adapter+0x11/0x20
kthread+0x166/0x190
ret_from_fork+0x22/0x30
Kernel panic - not syncing: Fatal exception
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
To solve this problem, the test case thread should be stopped when the
kunit frame runs overtime. The stop signal will send in function
kunit_try_catch_run, and test_gfpzero will handle it.
Link: https://lkml.kernel.org/r/20220309083753.1561921-1-liupeng256@huawei.com
Link: https://lkml.kernel.org/r/20220309083753.1561921-2-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow enabling KFENCE after system startup by allocating its pool via the
page allocator. This provides the flexibility to enable KFENCE even if it
wasn't enabled at boot time.
Link: https://lkml.kernel.org/r/20220307074516.6920-3-dtcccc@linux.alibaba.com
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Peng Liu <liupeng256@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "provide the flexibility to enable KFENCE", v3.
If CONFIG_CONTIG_ALLOC is not supported, we fallback to try
alloc_pages_exact(). Allocating pages in this way has limits about
MAX_ORDER (default 11). So we will not support allocating kfence pool
after system startup with a large KFENCE_NUM_OBJECTS.
When handling failures in kfence_init_pool_late(), we pair
free_pages_exact() to alloc_pages_exact() for compatibility consideration,
though it actually does the same as free_contig_range().
This patch (of 2):
If once KFENCE is disabled by:
echo 0 > /sys/module/kfence/parameters/sample_interval
KFENCE could never be re-enabled until next rebooting.
Allow re-enabling it by writing a positive num to sample_interval.
Link: https://lkml.kernel.org/r/20220307074516.6920-1-dtcccc@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220307074516.6920-2-dtcccc@linux.alibaba.com
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In mm/Makefile has:
obj-$(CONFIG_KFENCE) += kfence/
So that we don't need 'obj-$(CONFIG_KFENCE) :=' in mm/kfence/Makefile,
delete it from mm/kfence/Makefile.
Link: https://lkml.kernel.org/r/20220221065525.21344-1-tangmeng@uniontech.com
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The parameter kfence_sample_interval can be set via boot parameter and
late shell command, which is convenient for automated tests and KFENCE
parameter optimization. However, KFENCE test case just uses
compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test
case not run as users desired. Export kfence_sample_interval, so that
KFENCE test case can use run-time-set sample interval.
Link: https://lkml.kernel.org/r/20220207034432.185532-1-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian Knig <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmHYFIIACgkQ4CHKc/GJ
qRBXqwf+JrWc3PCRF4xKeYmi367RgSX9D8kFCcAry1F+iuq1ssqlDBy/vEp1KtXE
t2Xyn6PILgzGcYdK1/CVNigwAom2NRcb8fHamjjopqYk8wor9m46I564Z6ItVg2I
SCcWhHEuD7M66tmBS+oex3n+LOZ4jPUPhkn5KH04/LSTrR5dzn1op6CnFbpOUZn1
Uy9qB6EbjuyhsONHnO/CdoRUU07K+KqEkzolXFCqpI2Vqf+VBvAwi+RpDLfKkr6l
Vp4PT03ixVsOWhGaJcf7hijKCRyfhsLp7Zyg33pzwpXyngqrowwUPVDMKPyqBy6O
ktehRk+cOQiAi7KnpECljof+NR15Qg==
=/Nyj
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Separate struct slab from struct page - an offshot of the page folio
work.
Struct page fields used by slab allocators are moved from struct page
to a new struct slab, that uses the same physical storage. Similar to
struct folio, it always is a head page. This brings better type
safety, separation of large kmalloc allocations from true slabs, and
cleanup of related objcg code.
- A SLAB_MERGE_DEFAULT config optimization.
* tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (33 commits)
mm/slob: Remove unnecessary page_mapcount_reset() function call
bootmem: Use page->index instead of page->freelist
zsmalloc: Stop using slab fields in struct page
mm/slub: Define struct slab fields for CONFIG_SLUB_CPU_PARTIAL only when enabled
mm/slub: Simplify struct slab slabs field definition
mm/sl*b: Differentiate struct slab fields by sl*b implementations
mm/kfence: Convert kfence_guarded_alloc() to struct slab
mm/kasan: Convert to struct folio and struct slab
mm/slob: Convert SLOB to use struct slab and struct folio
mm/memcg: Convert slab objcgs from struct page to struct slab
mm: Convert struct page to struct slab in functions used by other subsystems
mm/slab: Finish struct page to struct slab conversion
mm/slab: Convert most struct page to struct slab by spatch
mm/slab: Convert kmem_getpages() and kmem_freepages() to struct slab
mm/slub: Finish struct page to struct slab conversion
mm/slub: Convert most struct page to struct slab by spatch
mm/slub: Convert pfmemalloc_match() to take a struct slab
mm/slub: Convert __free_slab() to use struct slab
mm/slub: Convert alloc_slab_page() to return a struct slab
mm/slub: Convert print_page_info() to print_slab_info()
...
With a struct slab definition separate from struct page, we can go
further and define only fields that the chosen sl*b implementation uses.
This means everything between __page_flags and __page_refcount
placeholders now depends on the chosen CONFIG_SL*B. Some fields exist in
all implementations (slab_list) but can be part of a union in some, so
it's simpler to repeat them than complicate the definition with ifdefs
even more.
The patch doesn't change physical offsets of the fields, although it
could be done later - for example it's now clear that tighter packing in
SLOB could be possible.
This should also prevent accidental use of fields that don't exist in
given implementation. Before this patch virt_to_cache() and
cache_from_obj() were visible for SLOB (albeit not used), although they
rely on the slab_cache field that isn't set by SLOB. With this patch
it's now a compile error, so these functions are now hidden behind
an #ifndef CONFIG_SLOB.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <guro@fb.com>
Tested-by: Marco Elver <elver@google.com> # kfence
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <kasan-dev@googlegroups.com>
The function sets some fields that are being moved from struct page to
struct slab so it needs to be converted.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <kasan-dev@googlegroups.com>
Regardless of KFENCE mode (CONFIG_KFENCE_STATIC_KEYS: either using
static keys to gate allocations, or using a simple dynamic branch),
always use a static branch to avoid the dynamic branch in kfence_alloc()
if KFENCE was disabled at boot.
For CONFIG_KFENCE_STATIC_KEYS=n, this now avoids the dynamic branch if
KFENCE was disabled at boot.
To simplify, also unifies the location where kfence_allocation_gate is
read-checked to just be inline in kfence_alloc().
Link: https://lkml.kernel.org/r/20211019102524.2807208-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initializing memory and setting/checking the canary bytes is relatively
expensive, and doing so in the meta->lock critical sections extends the
duration with preemption and interrupts disabled unnecessarily.
Any reads to meta->addr and meta->size in kfence_guarded_alloc() and
kfence_guarded_free() don't require locking meta->lock as long as the
object is removed from the freelist: only kfence_guarded_alloc() sets
meta->addr and meta->size after removing it from the freelist, which
requires a preceding kfence_guarded_free() returning it to the list or
the initial state.
Therefore move reads to meta->addr and meta->size, including expensive
memory initialization using them, out of meta->lock critical sections.
Link: https://lkml.kernel.org/r/20210930153706.2105471-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the new kunit_skip() to skip tests if requirements were not met. It
makes it easier to see in KUnit's summary if there were skipped tests.
Link: https://lkml.kernel.org/r/20210922182541.1372400-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One of KFENCE's main design principles is that with increasing uptime,
allocation coverage increases sufficiently to detect previously
undetected bugs.
We have observed that frequent long-lived allocations of the same source
(e.g. pagecache) tend to permanently fill up the KFENCE pool with
increasing system uptime, thus breaking the above requirement. The
workaround thus far had been increasing the sample interval and/or
increasing the KFENCE pool size, but is no reliable solution.
To ensure diverse coverage of allocations, limit currently covered
allocations of the same source once pool utilization reaches 75%
(configurable via `kfence.skip_covered_thresh`) or above. The effect is
retaining reasonable allocation coverage when the pool is close to full.
A side-effect is that this also limits frequent long-lived allocations
of the same source filling up the pool permanently.
Uniqueness of an allocation for coverage purposes is based on its
(partial) allocation stack trace (the source). A Counting Bloom filter
is used to check if an allocation is covered; if the allocation is
currently covered, the allocation is skipped by KFENCE.
Testing was done using:
(a) a synthetic workload that performs frequent long-lived
allocations (default config values; sample_interval=1;
num_objects=63), and
(b) normal desktop workloads on an otherwise idle machine where
the problem was first reported after a few days of uptime
(default config values).
In both test cases the sampled allocation rate no longer drops to zero
at any point. In the case of (b) we observe (after 2 days uptime) 15%
unique allocations in the pool, 77% pool utilization, with 20% "skipped
allocations (covered)".
[elver@google.com: simplify and just use hash_32(), use more random stack_hash_seed]
Link: https://lkml.kernel.org/r/YU3MRGaCaJiYht5g@elver.google.com
[elver@google.com: fix 32 bit]
Link: https://lkml.kernel.org/r/20210923104803.2620285-4-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the saving of the stack trace of allocations into __kfence_alloc(),
so that the stack entries array can be used outside of
kfence_guarded_alloc() and we avoid potentially unwinding the stack
multiple times.
Link: https://lkml.kernel.org/r/20210923104803.2620285-3-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maintain a counter to count allocations that are skipped due to being
incompatible (oversized, incompatible gfp flags) or no capacity.
This is to compute the fraction of allocations that could not be
serviced by KFENCE, which we expect to be rare.
Link: https://lkml.kernel.org/r/20210923104803.2620285-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Fail kfence_test fast if KFENCE was disabled at boot, instead of each test
case trying several seconds to allocate from KFENCE and failing. KUnit
will fail all test cases if kunit_suite::init returns an error.
Even if KFENCE was disabled, we still want the test to fail, so that CI
systems that parse KUnit output will alert on KFENCE being disabled
(accidentally or otherwise).
Link: https://lkml.kernel.org/r/20210825105533.1247922-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Record cpu and timestamp on allocations and frees, and show them in
reports. Upon an error, this can help correlate earlier messages in the
kernel log via allocation and free timestamps.
Link: https://lkml.kernel.org/r/20210714175312.2947941-1-elver@google.com
Suggested-by: Joern Engel <joern@purestorage.com>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Acked-by: Joern Engel <joern@purestorage.com>
Cc: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
s390 only reports the page address during a translation fault.
To make the kfence unit tests pass, add a function that might
be implemented by architectures to mask out address bits.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20210728190254.3921642-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Allocation requests outside ZONE_NORMAL (MOVABLE, HIGHMEM or DMA) cannot
be fulfilled by KFENCE, because KFENCE memory pool is located in a zone
different from the requested one.
Because callers of kmem_cache_alloc() may actually rely on the
allocation to reside in the requested zone (e.g. memory allocations
done with __GFP_DMA must be DMAable), skip all allocations done with
GFP_ZONEMASK and/or respective SLAB flags (SLAB_CACHE_DMA and
SLAB_CACHE_DMA32).
Link: https://lkml.kernel.org/r/20210714092222.1890268-2-glider@google.com
Fixes: 0ce20dd840 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check the allocation size before toggling kfence_allocation_gate.
This way allocations that can't be served by KFENCE will not result in
waiting for another CONFIG_KFENCE_SAMPLE_INTERVAL without allocating
anything.
Link: https://lkml.kernel.org/r/20210714092222.1890268-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kfence_test_init and kunit_init both use the same level late_initcall,
which means if kfence_test_init linked ahead of kunit_init,
kfence_test_init will get a NULL debugfs_rootdir as parent dentry, then
kfence_test_init and kfence_debugfs_init both create a debugfs node
named "kfence" under debugfs_mount->mnt_root, and it will throw out
"debugfs: Directory 'kfence' with parent '/' already present!" with
EEXIST. So kfence_test_init should be deferred.
Link: https://lkml.kernel.org/r/20210714113140.2949995-1-o451686892@gmail.com
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unconditionally use unbound work queue, and not just if wq_power_efficient
is true. Because if the system is idle, KFENCE may wait, and by being run
on the unbound work queue, we permit the scheduler to make better
scheduling decisions and not require pinning KFENCE to the same CPU upon
waking up.
Link: https://lkml.kernel.org/r/20210521111630.472579-1-elver@google.com
Fixes: 36f0b35d08 ("kfence: use power-efficient work queue to run delayed work")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently when size is not supported by kmalloc_index, compiler will
generate a run-time BUG() while compile-time error is also possible, and
better. So change BUG to BUILD_BUG_ON_MSG to make compile-time check
possible.
Also remove code that allocates more than 32MB because current
implementation supports only up to 32MB.
[42.hyeyoo@gmail.com: fix support for clang 10]
Link: https://lkml.kernel.org/r/20210518181247.GA10062@hyeyoo
[vbabka@suse.cz: fix false-positive assert in kernel/bpf/local_storage.c]
Link: https://lkml.kernel.org/r/bea97388-01df-8eac-091b-a3c89b4a4a09@suse.czLink: https://lkml.kernel.org/r/20210511173448.GA54466@hyeyoo
[elver@google.com: kfence fix]
Link: https://lkml.kernel.org/r/20210512195227.245000695c9014242e9a00e5@linux-foundation.org
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since wait_event() uses TASK_UNINTERRUPTIBLE by default, waiting for an
allocation counts towards load. However, for KFENCE, this does not make
any sense, since there is no busy work we're awaiting.
Instead, use TASK_IDLE via wait_event_idle() to not count towards load.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1185565
Link: https://lkml.kernel.org/r/20210521083209.3740269-1-elver@google.com
Fixes: 407f1d8c1b ("kfence: await for allocation using wait_event")
Signed-off-by: Marco Elver <elver@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Hillf Danton <hdanton@sina.com>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the power-efficient work queue, to avoid the pathological case where
we keep pinning ourselves on the same possibly idle CPU on systems that
want to be power-efficient (https://lwn.net/Articles/731052/).
Link: https://lkml.kernel.org/r/20210421105132.3965998-4-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The allocation wait timeout was initially added because of warnings due to
CONFIG_DETECT_HUNG_TASK=y [1]. While the 1 sec timeout is sufficient to
resolve the warnings (given the hung task timeout must be 1 sec or larger)
it may cause unnecessary wake-ups if the system is idle:
https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com
Fix it by computing the timeout duration in terms of the current
sysctl_hung_task_timeout_secs value.
Link: https://lkml.kernel.org/r/20210421105132.3965998-3-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kfence: optimize timer scheduling", v2.
We have observed that mostly-idle systems with KFENCE enabled wake up
otherwise idle CPUs, preventing such to enter a lower power state.
Debugging revealed that KFENCE spends too much active time in
toggle_allocation_gate().
While the first version of KFENCE was using all the right bits to be
scheduling optimal, and thus power efficient, by simply using wait_event()
+ wake_up(), that code was unfortunately removed.
As KFENCE was exposed to various different configs and tests, the
scheduling optimal code slowly disappeared. First because of hung task
warnings, and finally because of deadlocks when an allocation is made by
timer code with debug objects enabled. Clearly, the "fixes" were not too
friendly for devices that want to be power efficient.
Therefore, let's try a little harder to fix the hung task and deadlock
problems that we have with wait_event() + wake_up(), while remaining as
scheduling friendly and power efficient as possible.
Crucially, we need to defer the wake_up() to an irq_work, avoiding any
potential for deadlock.
The result with this series is that on the devices where we observed a
power regression, power usage returns back to baseline levels.
This patch (of 3):
On mostly-idle systems, we have observed that toggle_allocation_gate() is
a cause of frequent wake-ups, preventing an otherwise idle CPU to go into
a lower power state.
A late change in KFENCE's development, due to a potential deadlock [1],
required changing the scheduling-friendly wait_event_timeout() and
wake_up() to an open-coded wait-loop using schedule_timeout(). [1]
https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com
To avoid unnecessary wake-ups, switch to using wait_event_timeout().
Unfortunately, we still cannot use a version with direct wake_up() in
__kfence_alloc() due to the same potential for deadlock as in [1].
Instead, add a level of indirection via an irq_work that is scheduled if
we determine that the kfence_timer requires a wake_up().
Link: https://lkml.kernel.org/r/20210421105132.3965998-1-elver@google.com
Link: https://lkml.kernel.org/r/20210421105132.3965998-2-elver@google.com
Fixes: 0ce20dd840 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After an out-of-bounds accesses, zero the guard page before re-protecting
in kfence_guarded_free(). On one hand this helps make the failure mode of
subsequent out-of-bounds accesses more deterministic, but could also
prevent certain information leaks.
Link: https://lkml.kernel.org/r/20210312121653.348518-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object. Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".
The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.
For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().
Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some architectures prefix all functions with a constant string ('.' on
ppc64). Add ARCH_FUNC_PREFIX, which may optionally be defined in
<asm/kfence.h>, so that get_stack_skipnr() can work properly.
Link: https://lkml.kernel.org/r/f036c53d-7e81-763c-47f4-6024c6c5f058@csgroup.eu
Link: https://lkml.kernel.org/r/20210304144000.1148590-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it possible to trace KFENCE error reporting. A good usecase is
watching for trace events from the userspace to detect and process memory
corruption reports from the kernel.
Link: https://lkml.kernel.org/r/20210121131915.1331302-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We cannot rely on CONFIG_DEBUG_KERNEL to decide if we're running a "debug
kernel" where we can safely show potentially sensitive information in the
kernel log.
Instead, simply rely on the newly introduced "no_hash_pointers" to print
unhashed kernel pointers, as well as decide if our reports can include
other potentially sensitive information such as registers and corrupted
bytes.
Link: https://lkml.kernel.org/r/20210223082043.1972742-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add KFENCE test suite, testing various error detection scenarios. Makes
use of KUnit for test organization. Since KFENCE's interface to obtain
error reports is via the console, the test verifies that KFENCE outputs
expected reports to the console.
[elver@google.com: fix typo in test]
Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com
[elver@google.com: show access type in report]
Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inserts KFENCE hooks into the SLUB allocator.
To pass the originally requested size to KFENCE, add an argument
'orig_size' to slab_alloc*(). The additional argument is required to
preserve the requested original size for kmalloc() allocations, which
uses size classes (e.g. an allocation of 272 bytes will return an object
of size 512). Therefore, kmem_cache::size does not represent the
kmalloc-caller's requested size, and we must introduce the argument
'orig_size' to propagate the originally requested size to KFENCE.
Without the originally requested size, we would not be able to detect
out-of-bounds accesses for objects placed at the end of a KFENCE object
page if that object is not equal to the kmalloc-size class it was
bucketed into.
When KFENCE is disabled, there is no additional overhead, since
slab_alloc*() functions are __always_inline.
Link: https://lkml.kernel.org/r/20201103175841.3495947-6-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Co-developed-by: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inserts KFENCE hooks into the SLAB allocator.
To pass the originally requested size to KFENCE, add an argument
'orig_size' to slab_alloc*(). The additional argument is required to
preserve the requested original size for kmalloc() allocations, which
uses size classes (e.g. an allocation of 272 bytes will return an object
of size 512). Therefore, kmem_cache::size does not represent the
kmalloc-caller's requested size, and we must introduce the argument
'orig_size' to propagate the originally requested size to KFENCE.
Without the originally requested size, we would not be able to detect
out-of-bounds accesses for objects placed at the end of a KFENCE object
page if that object is not equal to the kmalloc-size class it was
bucketed into.
When KFENCE is disabled, there is no additional overhead, since
slab_alloc*() functions are __always_inline.
Link: https://lkml.kernel.org/r/20201103175841.3495947-5-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Marco Elver <elver@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of removing the fault handling portion of the stack trace based on
the fault handler's name, just use struct pt_regs directly.
Change kfence_handle_page_fault() to take a struct pt_regs, and plumb it
through to kfence_report_error() for out-of-bounds, use-after-free, or
invalid access errors, where pt_regs is used to generate the stack trace.
If the kernel is a DEBUG_KERNEL, also show registers for more information.
Link: https://lkml.kernel.org/r/20201105092133.2075331-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "KFENCE: A low-overhead sampling-based memory safety error detector", v7.
This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a
low-overhead sampling-based memory safety error detector of heap
use-after-free, invalid-free, and out-of-bounds access errors. This
series enables KFENCE for the x86 and arm64 architectures, and adds
KFENCE hooks to the SLAB and SLUB allocators.
KFENCE is designed to be enabled in production kernels, and has near
zero performance overhead. Compared to KASAN, KFENCE trades performance
for precision. The main motivation behind KFENCE's design, is that with
enough total uptime KFENCE will detect bugs in code paths not typically
exercised by non-production test workloads. One way to quickly achieve a
large enough total uptime is when the tool is deployed across a large
fleet of machines.
KFENCE objects each reside on a dedicated page, at either the left or
right page boundaries. The pages to the left and right of the object
page are "guard pages", whose attributes are changed to a protected
state, and cause page faults on any attempted access to them. Such page
faults are then intercepted by KFENCE, which handles the fault
gracefully by reporting a memory access error.
Guarded allocations are set up based on a sample interval (can be set
via kfence.sample_interval). After expiration of the sample interval,
the next allocation through the main allocator (SLAB or SLUB) returns a
guarded allocation from the KFENCE object pool. At this point, the timer
is reset, and the next allocation is set up after the expiration of the
interval.
To enable/disable a KFENCE allocation through the main allocator's
fast-path without overhead, KFENCE relies on static branches via the
static keys infrastructure. The static branch is toggled to redirect the
allocation to KFENCE.
The KFENCE memory pool is of fixed size, and if the pool is exhausted no
further KFENCE allocations occur. The default config is conservative
with only 255 objects, resulting in a pool size of 2 MiB (with 4 KiB
pages).
We have verified by running synthetic benchmarks (sysbench I/O,
hackbench) and production server-workload benchmarks that a kernel with
KFENCE (using sample intervals 100-500ms) is performance-neutral
compared to a non-KFENCE baseline kernel.
KFENCE is inspired by GWP-ASan [1], a userspace tool with similar
properties. The name "KFENCE" is a homage to the Electric Fence Malloc
Debugger [2].
For more details, see Documentation/dev-tools/kfence.rst added in the
series -- also viewable here:
https://raw.githubusercontent.com/google/kasan/kfence/Documentation/dev-tools/kfence.rst
[1] http://llvm.org/docs/GwpAsan.html
[2] https://linux.die.net/man/3/efence
This patch (of 9):
This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a
low-overhead sampling-based memory safety error detector of heap
use-after-free, invalid-free, and out-of-bounds access errors.
KFENCE is designed to be enabled in production kernels, and has near
zero performance overhead. Compared to KASAN, KFENCE trades performance
for precision. The main motivation behind KFENCE's design, is that with
enough total uptime KFENCE will detect bugs in code paths not typically
exercised by non-production test workloads. One way to quickly achieve a
large enough total uptime is when the tool is deployed across a large
fleet of machines.
KFENCE objects each reside on a dedicated page, at either the left or
right page boundaries. The pages to the left and right of the object
page are "guard pages", whose attributes are changed to a protected
state, and cause page faults on any attempted access to them. Such page
faults are then intercepted by KFENCE, which handles the fault
gracefully by reporting a memory access error. To detect out-of-bounds
writes to memory within the object's page itself, KFENCE also uses
pattern-based redzones. The following figure illustrates the page
layout:
---+-----------+-----------+-----------+-----------+-----------+---
| xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx |
| xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx |
| x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x |
| xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx |
| xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx |
| xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx |
---+-----------+-----------+-----------+-----------+-----------+---
Guarded allocations are set up based on a sample interval (can be set
via kfence.sample_interval). After expiration of the sample interval, a
guarded allocation from the KFENCE object pool is returned to the main
allocator (SLAB or SLUB). At this point, the timer is reset, and the
next allocation is set up after the expiration of the interval.
To enable/disable a KFENCE allocation through the main allocator's
fast-path without overhead, KFENCE relies on static branches via the
static keys infrastructure. The static branch is toggled to redirect the
allocation to KFENCE. To date, we have verified by running synthetic
benchmarks (sysbench I/O, hackbench) that a kernel compiled with KFENCE
is performance-neutral compared to the non-KFENCE baseline.
For more details, see Documentation/dev-tools/kfence.rst (added later in
the series).
[elver@google.com: fix parameter description for kfence_object_start()]
Link: https://lkml.kernel.org/r/20201106092149.GA2851373@elver.google.com
[elver@google.com: avoid stalling work queue task without allocations]
Link: https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com
Link: https://lkml.kernel.org/r/20201110135320.3309507-1-elver@google.com
[elver@google.com: fix potential deadlock due to wake_up()]
Link: https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com
Link: https://lkml.kernel.org/r/20210104130749.1768991-1-elver@google.com
[elver@google.com: add option to use KFENCE without static keys]
Link: https://lkml.kernel.org/r/20210111091544.3287013-1-elver@google.com
[elver@google.com: add missing copyright and description headers]
Link: https://lkml.kernel.org/r/20210118092159.145934-1-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: SeongJae Park <sjpark@amazon.de>
Co-developed-by: Marco Elver <elver@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
