Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Simple filesystems always pass inode->i_sb_bdev as the block device
argument, and never need a end_io handler. Let's simply things for
them and for my grepping activity by dropping these arguments. The
only thing not falling into that scheme is ext4, which passes and
end_io handler without needing special flags (yet), but given how
messy the direct I/O code there is use of __blockdev_direct_IO
in one instead of two out of three cases isn't going to make a large
difference anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Checkpoint generation interval of nilfs goes wrong after user has
changed the interval parameter with nilfs-tune tool.
segctord starting. Construction interval = 5 seconds,
CP frequency < 30 seconds
segctord starting. Construction interval = 0 seconds,
CP frequency < 30 seconds
This turned out to be caused by a trivial bug in initialization code
of log writer. This will fix it.
Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btree_delete function does not terminate part of virtual block
addresses when shrinking the last remaining child node into the root
node. The missing address termination causes that dead btree node
blocks persist and chip away free disk space.
This fixes the leak bug on the btree node deletion.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btree_delete function wrongly terminates virtual block address
of the btree node held by its parent at index 0. When concatenating
the index-0 node with its right sibling node, nilfs_btree_delete
terminates the block address of index-0 node instead of the right
sibling node which should be deleted.
This bug not only wears disk space in the long run, but also causes
file system corruption. This will fix it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs2 does not have problems with references to unlinked directories.
CC: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
CC: linux-nilfs@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.
This is just the prototype change with no user for it yet. I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.
Also remove incorrect comments that ->dirty_inode can't block. That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (25 commits)
cifs: remove unnecessary dentry_unhash on rmdir/rename_dir
ocfs2: remove unnecessary dentry_unhash on rmdir/rename_dir
exofs: remove unnecessary dentry_unhash on rmdir/rename_dir
nfs: remove unnecessary dentry_unhash on rmdir/rename_dir
ext2: remove unnecessary dentry_unhash on rmdir/rename_dir
ext3: remove unnecessary dentry_unhash on rmdir/rename_dir
ext4: remove unnecessary dentry_unhash on rmdir/rename_dir
btrfs: remove unnecessary dentry_unhash in rmdir/rename_dir
ceph: remove unnecessary dentry_unhash calls
vfs: clean up vfs_rename_other
vfs: clean up vfs_rename_dir
vfs: clean up vfs_rmdir
vfs: fix vfs_rename_dir for FS_RENAME_DOES_D_MOVE filesystems
libfs: drop unneeded dentry_unhash
vfs: update dentry_unhash() comment
vfs: push dentry_unhash on rename_dir into file systems
vfs: push dentry_unhash on rmdir into file systems
vfs: remove dget() from dentry_unhash()
vfs: dentry_unhash immediately prior to rmdir
vfs: Block mmapped writes while the fs is frozen
...
Only a few file systems need this. Start by pushing it down into each
rename method (except gfs2 and xfs) so that it can be dealt with on a
per-fs basis.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Only a few file systems need this. Start by pushing it down into each
fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs
basis.
This does not change behavior for any in-tree file systems.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty
macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty,
an own mark buffer dirty function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
In the current nilfs, page cache for btree nodes and meta data files
do not set a valid back pointer to the host inode in mapping->host.
This will change it so that every address space in nilfs uses
mapping->host to hold its host inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This replaces all references of NILFS_I_NILFS(inode)->ns_bdev with
inode->i_sb->s_bdev and unfolds remaining uses of NILFS_I_NILFS inline
function.
Before 2.6.37, referring to a nilfs object from inodes needed a
conditional judgement, and NILFS_I_NILFS was helpful to simplify it.
But now we can simply do it by going through a super block instance
like inode->i_sb->s_fs_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This uses list_first_entry macro instead of list_entry if it's used to
get the first entry.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
When shrinking the filesystem, segments to be truncated must be test
if they are busy or not, and unneeded sufile block should be deleted.
This adds routines for the truncation.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After resizing the filesystem, the secondary super block must be moved
to a new location. This adds a helper function for this.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a new ioctl command which limits range of segment to be
allocated. This is intended to gather data whithin a range of the
partition before shrinking the filesystem, or to control new log
location for some purpose.
If a range is specified by the ioctl, segment allocator of nilfs tries
to allocate new segments from the range unless no free segments are
available there.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The super root block is newly-allocated each time it is written back
to disk, so unused portion of the block should be cleared.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The size of super root structure depends on inode size, so
NILFS_SR_BYTES macro should be a function of the inode size. This
fixes the issue.
Even though a different size value will be written for a possible
future filesystem with extended inode, but fortunately this does not
break disk format compatibility.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, nilfs was cloning pages for mmapped region to freeze their
data and ensure consistency of checksum during writeback cycles. A
private page allocator was used for this page cloning. But, we no
longer need to do that since clear_page_dirty_for_io function sets up
pte so that vm_ops->page_mkwrite function is called right before the
mmapped pages are modified and nilfs_page_mkwrite function can safely
wait for the pages to be written back to disk.
So, this stops making a copy of mmapped pages during writeback, and
eliminates the private page allocation and deallocation functions from
nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Merge list_del() + list_add_tail() to list_move_tail().
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After having applied commit 9954e7af14 ("nilfs2: add free
entries count only if clear bit operation succeeded"), a free routine
of nilfs came to fall into an infinite loop, outputting the same
message endlessly:
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed
nilfs_palloc_freev: entry number 29497 already freed ...
That patch broke the routine so that a loop counter is never updated
in an abnormal state. This fixes the regression.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
With the ->sync_page() hook gone, we have a few users that
add their own static address_space_operations without any
functions defined.
fs/inode.c already has an empty_aops that it uses for init
purposes. Lets export that and use it in the places where
an otherwise empty aops was defined.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
From the result of a function test of mmap, mmap write to shared pages
turned out to be broken for hole blocks. It doesn't write out filled
blocks and the data will be lost after umount. This is due to a bug
that the target file is not queued for log writer when filling hole
blocks.
Also, nilfs_page_mkwrite function exits normal code path even after
successfully filled hole blocks due to a change of block_page_mkwrite
function; just after nilfs was merged into the mainline,
block_page_mkwrite() started to return VM_FAULT_LOCKED instead of zero
by the patch "mm: close page_mkwrite races" (commit:
b827e496c8). The current nilfs_page_mkwrite() is not handling
this value properly.
This corrects nilfs_page_mkwrite() and will resolve the data loss
problem in mmap write.
[This should be applied to every kernel since 2.6.30 but a fix is
needed for 2.6.37 and prior kernels]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org> [2.6.38]
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
And give it a kernel-doc comment.
[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This directly uses sb->s_fs_info to keep a nilfs filesystem object and
fully removes the intermediate nilfs_sb_info structure. With this
change, the hierarchy of on-memory structures of nilfs will be
simplified as follows:
Before:
super_block
-> nilfs_sb_info
-> the_nilfs
-> cptree --+-> nilfs_root (current file system)
+-> nilfs_root (snapshot A)
+-> nilfs_root (snapshot B)
:
-> nilfs_sc_info (log writer structure)
After:
super_block
-> the_nilfs
-> cptree --+-> nilfs_root (current file system)
+-> nilfs_root (snapshot A)
+-> nilfs_root (snapshot B)
:
-> nilfs_sc_info (log writer structure)
The reason why we didn't design so from the beginning is because the
initial shape also differed from the above. The early hierachy was
composed of "per-mount-point" super_block -> nilfs_sb_info pairs and a
shared nilfs object. On the kernel 2.6.37, it was changed to the
current shape in order to unify super block instances into one per
device, and this cleanup became applicable as the result.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Removes sci->sc_sbi which is a back pointer to nilfs_sb_info struct
from log writer object (nilfs_sc_info).
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Log writer is held by the nilfs_sb_info structure. This moves it into
nilfs object and replaces all uses of NILFS_SC() accessor.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Moves s_next_generation counter and a spinlock protecting it to nilfs
object from nilfs_sb_info structure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Moves s_inode_lock spinlock and s_dirty_files list to nilfs object
from nilfs_sb_info structure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This moves four parameter variables on nilfs_sb_info s_resuid,
s_resgid, s_interval and s_watermark to the nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This records the number of used blocks per checkpoint in each
checkpoint entry of cpfile. Even though userland tools can get the
block count via nilfs_get_cpinfo ioctl, it was not updated by the
nilfs2 kernel code. This fixes the issue and makes it available for
userland tools to calculate used amount per checkpoint.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
This is a similar change to those in ext2/ext3 codebase (commit
40a063f669 and a4ae309486, respectively).
The addition of 64k block capability in the rec_len_from_disk and
rec_len_to_disk functions added a bit of math overhead which slows
down file create workloads needlessly when the architecture cannot
even support 64k blocks. This will cut the corner.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
At present, the same warning message can be output twice when nilfs
detected a problem on super blocks:
NILFS warning: broken superblock. using spare superblock.
NILFS warning: broken superblock. using spare superblock.
...
This is because these super blocks are reloaded with the block size
written in a super block if it differs from the first block size, but
this repetition looks somewhat confusing. So, we hint at what is
going on by appending block size information to those messages.
Reported-by: Wakko Warner <wakko@animx.eu.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current FS_IOC_GETFLAGS/SETFLAGS/GETVERSION will fail if
application is 32 bit and kernel is 64 bit.
This issue is avoidable by adding compat_ioctl method.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Add support for the standard attributes set via chattr and read via
lsattr. These attributes are already in the flags value in the nilfs2
inode, but currently we don't have any ioctl commands that expose them
to the userland.
Collaterally, this adds the FS_IOC_GETVERSION ioctl for getting
i_generation, which allows users to list the file's generation number
with "lsattr -v".
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs has few rectrictions on which flags may be set on which inodes
like ext2/3/4 filesystems used to be. Specifically DIRSYNC may only
be set on directories and IMMUTABLE and APPEND may not be set on
links. Tighten that to disallow TOPDIR being set on non-directories
and only NODUMP and NOATIME to be set on non-regular file,
non-directories.
This introduces a flags masking function like those of extN and uses
it during inode creation.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
At present, nilfs marks S_NOATIME flag on all inodes. This restricts
nilfs_set_inode_flags function so that it marks S_NOATIME only if a
given inode has an FS_NOATIME_FL flag.
Although nilfs does not support atime yet, touch_atime() still safely
returns on IS_NOATIME check since MS_NOATIME is always set on sb.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Replaces uses of own inode flags (i.e. NILFS_SECRM_FL, NILFS_UNRM_FL,
NILFS_COMPR_FL, and so forth) with common inode flags, and removes the
own flag declarations.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Three functions of the current persistent object allocator,
nilfs_palloc_commit_free_entry, nilfs_palloc_abort_alloc_entry, and
nilfs_palloc_freev functions unconditionally add a counter after doing
clear bit operation on a bitmap block.
If the clear bit operation overlapped, the counter will not add up.
This fixes the issue by making the counter operations conditional.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes the issue that inodes count will not add up after removal
of raw inodes fails. Hence, this prevents possible under flow of the
inodes count.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
According to the report from Jiro SEKIBA titled "regression in
2.6.37?" (Message-Id: <8739n8vs1f.wl%jir@sekiba.com>), on 2.6.37 and
later kernels, lscp command no longer displays "i" flag on checkpoints
that snapshot operations or garbage collection created.
This is a regression of nilfs2 checkpointing function, and it's
critical since it broke behavior of a part of nilfs2 applications.
For instance, snapshot manager of TimeBrowse gets to create
meaningless snapshots continuously; snapshot creation triggers another
checkpoint, but applications cannot distinguish whether the new
checkpoint contains meaningful changes or not without the i-flag.
This patch fixes the regression and brings that application behavior
back to normal.
Reported-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Jiro SEKIBA <jir@unicus.jp>
Cc: stable <stable@kernel.org> [2.6.37]
Michael Leun reported that running parallel opens on a fuse filesystem
can trigger a "kernel BUG at mm/truncate.c:475"
Gurudas Pai reported the same bug on NFS.
The reason is, unmap_mapping_range() is not prepared for more than
one concurrent invocation per inode. For example:
thread1: going through a big range, stops in the middle of a vma and
stores the restart address in vm_truncate_count.
thread2: comes in with a small (e.g. single page) unmap request on
the same vma, somewhere before restart_address, finds that the
vma was already unmapped up to the restart address and happily
returns without doing anything.
Another scenario would be two big unmap requests, both having to
restart the unmapping and each one setting vm_truncate_count to its
own value. This could go on forever without any of them being able to
finish.
Truncate and hole punching already serialize with i_mutex. Other
callers of unmap_mapping_range() do not, and it's difficult to get
i_mutex protection for all callers. In particular ->d_revalidate(),
which calls invalidate_inode_pages2_range() in fuse, may be called
with or without i_mutex.
This patch adds a new mutex to 'struct address_space' to prevent
running multiple concurrent unmap_mapping_range() on the same mapping.
[ We'll hopefully get rid of all this with the upcoming mm
preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex
lockbreak" patch in particular. But that is for 2.6.39 ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Michael Leun <lkml20101129@newton.leun.net>
Reported-by: Gurudas Pai <gurudas.pai@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.
This function got obsolete when the gcdat inode was removed, and now
we can access the dat inode directly from a nilfs object. So, we will
unfold the wrapper and remove it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes argument for passing nilfs_sb_info structure from
nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get
a pointer to the structure from inodes.
[Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit
b74c79e993]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Only mount_opt member is used in the nilfs_mount_options structure,
and we can simplify it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_page_get_nth_block() function used in nilfs_mdt_freeze_buffer()
always returns a valid buffer head, so its validity check can be
removed.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds fiemap to nilfs. Two new functions, nilfs_fiemap and
nilfs_find_uncommitted_extent are added.
nilfs_fiemap() implements the fiemap inode operation, and
nilfs_find_uncommitted_extent() helps to get a range of data blocks
whose physical location has not been determined.
nilfs_fiemap() collects extent information by looping through
nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs does not allocate new blocks on disk until they are actually
written to. To implement fiemap, we need to deal with such blocks.
To allow successive fiemap patch to distinguish mapped but unallocated
regions, this marks buffer heads of those new blocks as delayed and
clears the flag after the blocks are written to disk.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Some functions using nilfs bmap routines can wrongly return invalid
argument error (i.e. -EINVAL) that bmap returns as an internal code
for btree corruption.
This fixes the issue by catching and converting the internal EINVAL to
EIO and calling nilfs_error function inside bmap routines.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Using %pV reduces the number of printk calls and
eliminates any possible message interleaving from
other printk calls.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Make d_count non-atomic and protect it with d_lock. This allows us to ensure a
0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when
we start protecting many other dentry members with d_lock.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
On 2.6.37-rc1, garbage collection ioctl of nilfs was broken due to the
commit 263d90cefc ("nilfs2: remove own inode hash used for GC"),
and leading to filesystem corruption.
The patch doesn't queue gc-inodes for log writer if they are reused
through the vfs inode cache. Here, gc-inode is the inode which
buffers blocks to be relocated on GC. That patch queues gc-inodes in
nilfs_init_gcinode() function, but this function is not called when
they don't have I_NEW flag. Thus, some of live blocks are wrongly
overrode without being moved to new logs.
This resolves the problem by moving the gc-inode queueing to an outer
function to ensure it's done right.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_iget_for_gc() returns an ERR_PTR() on failure and doesn't return
NULL.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().
blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.
All users are converted. Most conversions are mechanical and don't
introduce any behavior difference. There are several exceptions.
* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
reason to OR it explicitly on blkdev_put().
* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
sb->s_mode.
* With the above changes, sb->s_mode now always should contain
FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect
errors.
The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.
* blkdev_get/put() are the primary open and close functions.
* bd_claim/release() deal with exclusive open.
* open/close_bdev_exclusive() are combination of open and claim and
the other way around, respectively.
* bd_link/unlink_disk_holder() to create and remove holder/slave
symlinks.
* open_by_devnum() wraps bdget() + blkdev_get().
The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access. Reorganize the interface such that,
* blkdev_get() is extended to include exclusive access management.
@holder argument is added and, if is @FMODE_EXCL specified, it will
gain exclusive access atomically w.r.t. other exclusive accesses.
* blkdev_put() is similarly extended. It now takes @mode argument and
if @FMODE_EXCL is set, it releases an exclusive access. Also, when
the last exclusive claim is released, the holder/slave symlinks are
removed automatically.
* bd_claim/release() and close_bdev_exclusive() are no longer
necessary and either made static or removed.
* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
is no longer necessary and removed.
* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
and blkdev_get(). It also has an unexpected extra bdev_read_only()
test which probably should be moved into blkdev_get().
* open_by_devnum() is modified to take @holder argument and pass it to
blkdev_get().
Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should). This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.
open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features. Well, let's leave them for another day.
Most conversions are straight-forward. drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
To help developers and applications gain visibility into writeback
behaviour this patch adds two counters to /proc/vmstat.
# grep nr_dirtied /proc/vmstat
nr_dirtied 3747
# grep nr_written /proc/vmstat
nr_written 3618
These entries allow user apps to understand writeback behaviour over time
and learn how it is impacting their performance. Currently there is no
way to inspect dirty and writeback speed over time. It's not possible for
nr_dirty/nr_writeback.
These entries are necessary to give visibility into writeback behaviour.
We have /proc/diskstats which lets us understand the io in the block
layer. We have blktrace for more in depth understanding. We have
e2fsprogs and debugsfs to give insight into the file systems behaviour,
but we don't offer our users the ability understand what writeback is
doing. There is no way to know how active it is over the whole system, if
it's falling behind or to quantify it's efforts. With these values
exported users can easily see how much data applications are sending
through writeback and also at what rates writeback is processing this
data. Comparing the rates of change between the two allow developers to
see when writeback is not able to keep up with incoming traffic and the
rate of dirty memory being sent to the IO back end. This allows folks to
understand their io workloads and track kernel issues. Non kernel
engineers at Google often use these counters to solve puzzling performance
problems.
Patch #4 adds a pernode vmstat file with nr_dirtied and nr_written
Patch #5 add writeback thresholds to /proc/vmstat
Currently these values are in debugfs. But they should be promoted to
/proc since they are useful for developers who are writing databases
and file servers and are not debugging the kernel.
The output is as below:
# grep threshold /proc/vmstat
nr_pages_dirty_threshold 409111
nr_pages_dirty_background_threshold 818223
This patch:
This allows code outside of the mm core to safely manipulate page
writeback state and not worry about the other accounting. Not using these
routines means that some code will lose track of the accounting and we get
bugs.
Modify nilfs2 to use interface.
Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (36 commits)
nilfs2: eliminate sparse warning - "context imbalance"
nilfs2: eliminate sparse warnings - "symbol not declared"
nilfs2: get rid of bdi from nilfs object
nilfs2: change license of exported header file
nilfs2: add bdev freeze/thaw support
nilfs2: accept 64-bit checkpoint numbers in cp mount option
nilfs2: remove own inode allocator and destructor for metadata files
nilfs2: get rid of back pointer to writable sb instance
nilfs2: get rid of mi_nilfs back pointer to nilfs object
nilfs2: see state of root dentry for mount check of snapshots
nilfs2: use iget for all metadata files
nilfs2: get rid of GCDAT inode
nilfs2: add routines to redirect access to buffers of DAT file
nilfs2: add routines to roll back state of DAT file
nilfs2: add routines to save and restore bmap state
nilfs2: do not allocate nilfs_mdt_info structure to gc-inodes
nilfs2: allow nilfs_clear_inode to clear metadata file inodes
nilfs2: get rid of snapshot mount flag
nilfs2: simplify life cycle management of nilfs object
nilfs2: do not allocate multiple super block instances for a device
...
insert sparse annotations to fix following sparse warning.
fs/nilfs2/segment.c:2681:3: warning: context imbalance in 'nilfs_segctor_kill_thread' - unexpected unlock
nilfs_segctor_kill_thread is only called inside sc_state_lock lock.
sparse doesn't detect the context and warn "unexpected unlock".
__acquires/__releases pretend to lock/unlock the sc_state_lock for sparse.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
change nilfs_dat_commit_free and nilfs_inode_cachep static
to fix following warnings
fs/nilfs2/super.c:72:19: warning: symbol 'nilfs_inode_cachep' was not declared. Should it be static?
fs/nilfs2/dat.c:106:6: warning: symbol 'nilfs_dat_commit_free' was not declared. Should it be static?
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs now can use sb->s_bdi to get backing_dev_info, so we use it
instead of ns_bdi on the nilfs object and remove ns_bdi.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs hasn't supported the freeze/thaw feature because it didn't work
due to the peculiar design that multiple super block instances could
be allocated for a device. This limitation was removed by the patch
"nilfs2: do not allocate multiple super block instances for a device".
So now this adds the freeze/thaw support to nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current implementation doesn't mount snapshots with checkpoint
numbers larger than INT_MAX since it uses match_int() for parsing
"cp=" mount option.
This uses simple_strtoull() for the conversion to resolve the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This finally removes own inode allocator and destructor functions for
metadata files. Several routines, nilfs_mdt_new(),
nilfs_mdt_new_common(), nilfs_mdt_clear(), nilfs_mdt_destroy(), and
nilfs_alloc_inode_common() will be gone.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs object holds a back pointer to a writable super block instance
in nilfs->ns_writer, and this became eliminable since sb is now made
per device and all inodes have a valid pointer to it.
This deletes the ns_writer pointer and a reader/writer semaphore
protecting it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes a back pointer to nilfs object from nilfs_mdt_info
structure that is attached to metadata files.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.
The orphan root dentry/inode keeps a root object, and this causes
false positive of nilfs_checkpoint_is_mounted function.
This resolves the issue by having nilfs_checkpoint_is_mounted test
whether the root dentry is busy or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies prepared rollback function and redirect function of
metadata file to DAT file, and eliminates GCDAT inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
