Commit Graph

3705 Commits

Author SHA1 Message Date
Linus Torvalds
b7769c45b8 RTC for 5.10
Subsystem:
  - new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt
 
 New driver:
  - Microcrystal RV-3032
 
 Drivers:
  - ds1307: use aux-voltage-chargeable
  - r9701, rx8010: modernization of the driver
  - rv3028: fix clock output, trickle resistor values, RAM configuration
    registers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl+OCzsACgkQ2wIijOdR
 NOUtNg/+IyHLMgD/VzXWLKwbtBXk6bMgVBf2sqnMjEodEjt2nHryb3Rw5ndn41EC
 2rCILJK6atF8ZRJPUSLHUK/XHuPvrLSXdheHbTGZIOIiKE10DAKnwZ61AOhRDgsN
 9J2wbs6QhxDjRg5nSETPkBp7/iXC2M4hggpi86/VUNZ7bil8P8u76at16uh0phS2
 uCWXVqQZMR7nzwb6kIBSSrNsO0k1N0246NVPesGlz/cOGpVPkCP8SU8aGzOqjzLm
 GKmQkjlN5EjvBTw9mfdr2ZghHTx0NH/E004rkLy/XiszGrK9Urev2FAdAnYWkSff
 BMPmyTKVwnvguysgv+PEfr0M1NnAc4k6EJkMOFndaigYoXHJ6M0RFJPtsEavjkR/
 c4H82Q1VDtFuayXSYy/ovgmDYJA9OFQSkHCAzkt4cmBTYSM8QDmUpQnnBYGWvef+
 nBpCQUfy7R6cJglByCsJmqCIdy+p5AdBuy4ssalA9flZ9Vg+D3rGySJ/XCP2EDb+
 ezbSckK9FCC6PmajO6Ds4FD+UrBM5CyZl3mSMiNIA32kHBNEfGntxwrHlEu2LlDL
 fpgJa1WBKWATHc2jpfeLLqeP3qciPX32bfn70AbBmLZcxHtuEQ1W5gPkOK25bYP5
 nDrEzq9F9MW32KELOjdhKQu/8vrTIZuwqv7gg8WX+6gvgZjs3MQ=
 =o9I0
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...
2020-10-21 11:22:08 -07:00
Alexandre Belloni
35331b506f rtc: r9701: set range
Set range and remove the set_time check. This is a classic BCD RTC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-6-alexandre.belloni@bootlin.com
2020-10-19 22:48:55 +02:00
Alexandre Belloni
dfe13cf2ae rtc: r9701: convert to devm_rtc_allocate_device
This allows further improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-5-alexandre.belloni@bootlin.com
2020-10-19 22:48:55 +02:00
Alexandre Belloni
8b34134907 rtc: r9701: stop setting RWKCNT
tm_wday is never checked for validity and it is not read back in
r9701_get_datetime. Avoid setting it to stop tripping static checkers:

        drivers/rtc/rtc-r9701.c:109 r9701_set_datetime()
        error: undefined (user controlled) shift '1 << dt->tm_wday'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-4-alexandre.belloni@bootlin.com
2020-10-19 22:48:55 +02:00
Alexandre Belloni
2a8f3380c9 rtc: r9701: remove useless memset
The RTC core already sets to zero the struct rtc_tie it passes to the
driver, avoid doing it a second time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-3-alexandre.belloni@bootlin.com
2020-10-19 22:48:55 +02:00
Alexandre Belloni
7390bec4ed rtc: r9701: stop setting a default time
It doesn't make sense to set the RTC to a default value at probe time. Let
the core handle invalid date and time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-2-alexandre.belloni@bootlin.com
2020-10-19 22:48:55 +02:00
Alexandre Belloni
92c6dcfbd1 rtc: r9701: remove leftover comment
Commit 22652ba724 ("rtc: stop validating rtc_time in .read_time") removed
the code but not the associated comment.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201015191135.471249-1-alexandre.belloni@bootlin.com
2020-10-19 22:48:55 +02:00
Alexandre Belloni
2eeaa532ac rtc: rv3032: Add a driver for Microcrystal RV-3032
New driver for the Microcrystal RV-3032, including support for:
 - Date/time
 - Alarms
 - Low voltage detection
 - Trickle charge
 - Trimming
 - Clkout
 - RAM
 - EEPROM
 - Temperature sensor

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201013144110.1942218-3-alexandre.belloni@bootlin.com
2020-10-19 22:47:56 +02:00
Alexandre Belloni
024e6f3dce rtc: rv3028: ensure ram configuration registers are saved
If RV3028_CTRL1_EERD is not set (this is the default), the RTC will refresh
the RAM configuration registers from the EEPROM at midnight. It is
necessary to save the RAM registers back to EEPROM after modifying them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-4-alexandre.belloni@bootlin.com
2020-10-15 12:09:35 +02:00
Alexandre Belloni
de0ad60e79 rtc: rv3028: factorize EERD bit handling
Both rv3028_eeprom_write and rv3028_eeprom_read enable EERD before sending
commands to the EEPROM and restore it afterwards. Factorize this code.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-3-alexandre.belloni@bootlin.com
2020-10-15 12:09:35 +02:00
Alexandre Belloni
c1efae1432 rtc: rv3028: fix trickle resistor values
Version 1.0 of the application manual had the wrong resistor values. Fix
them according to version 1.1

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-2-alexandre.belloni@bootlin.com
2020-10-15 12:09:35 +02:00
Alexandre Belloni
00e8e87f10 rtc: rv3028: fix clock output support
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but
clk_set_rate may be called with the clock disabled. Ensure the clock is
kept disabled if it was not yet enabled.

Also, the actual rate was overwritten when enabling the clock, properly
write to the register only once.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
2020-10-15 12:09:34 +02:00
Fei Shao
770c03e6da rtc: mt6397: Remove unused member dev
Removing the struct member "dev" in mt6397 RTC driver because it's not
initialized and the only usage is for one debugging message.

Also fixed a typo in the error message.

Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org
2020-10-15 12:01:29 +02:00
Liu Shixin
179b4bcc4c rtc: rv8803: simplify the return expression of rv8803_nvram_write
Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200921082449.2591981-1-liushixin2@huawei.com
2020-09-29 22:20:10 +02:00
Liu Shixin
9ce42e8e03 rtc: meson: simplify the return expression of meson_vrtc_probe
Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200919100856.1639319-1-liushixin2@huawei.com
2020-09-29 22:19:15 +02:00
Bartosz Golaszewski
ba1bcafb29 rtc: rx8010: rename rx8010_init_client() to rx8010_init()
Since the switch to using regmap this function no longer takes the
I2C client struct as argument nor do we even interact with the client
anywhere other than when creating the regmap.

Rename it to a less misleading name: "rx8010_init()".

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
2020-09-29 22:18:10 +02:00
Bastian Krause
0026f1604c rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
The ds1307 charger infrastructure now allows to add a rx8130 charger
setup that..

- does not depend on trickle-resistor-ohms
- does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS)
  bits
- keeps previous no-charge behavior for device trees without
  aux-voltage-chargeable

Make that happen.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-9-bst@pengutronix.de
2020-09-24 09:56:04 +02:00
Bastian Krause
0874734e09 rtc: ds1307: consider aux-voltage-chargeable
Prefer aux-voltage-chargeable over trickle-diode-disable and set diode
accordingly. This is then passed to the chip's appropriate charge setup
function.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-8-bst@pengutronix.de
2020-09-24 09:56:04 +02:00
Bastian Krause
95a74cbb21 rtc: ds1307: store previous charge default per chip
Some RTC's batteries and supercaps were charged by default until now.
In contrast other RTCs allow charging but the driver did not configure
them to do so until now. These must not be charged by default to stay
backwards compatible.

In order to do that, store the charge default per chip.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-7-bst@pengutronix.de
2020-09-24 09:56:04 +02:00
Bastian Krause
1b5b6af788 rtc: ds1307: introduce requires_trickle_resistor per chip
Make trickle-resistor-ohms optional for charging setups that do not
require specifying ROUT bits (specifying the resistor value between Vcc
and Vbackup). In order to allow specifying that, introduce
requires_trickle_resistor per chip.

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-6-bst@pengutronix.de
2020-09-24 09:56:04 +02:00
Bastian Krause
462eb736db rtc: ds1307: apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionally
DS13XX_TRICKLE_CHARGER_MAGIC sets the trickle-charge select (TCS) bits
(7..4). The datasheet of Maxim Integrated's DS1339 [1] for instance
reads:

"To prevent accidental enabling, only a pattern on 1010 enables the
trickle charger. All other patterns disable the trickle charger."

Since not all RTCs connected to a backup battery or supercap use these
bits DS13XX_TRICKLE_CHARGER_MAGIC should not get applied for all charger
setups unconditionally.
Epson's RX8130 is such an example: Instead of TCS bits "SMPTSEL1",
"SMPTSEL0",  "CHGEN" and "INIEN" are expected as bit 7..4.

DS1339 and DS1340 are currently the only RTCs in the ds1307 driver that
apply DS13XX_TRICKLE_CHARGER_MAGIC to their setup register value. So
apply DS13XX_TRICKLE_CHARGER_MAGIC in do_trickle_setup_ds1339() which
is used by both RTCs.

[1] https://datasheets.maximintegrated.com/en/ds/DS1339-DS1339U.pdf
[2] https://support.epson.biz/td/api/doc_check.php?dl=app_RX8130CE

Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917183246.19446-5-bst@pengutronix.de
2020-09-24 09:56:03 +02:00
Biwen Li
35425bafc7 rtc: pcf2127: fix a bug when not specify interrupts property
Fix a bug when not specify interrupts property in dts
as follows,
    rtc-pcf2127-i2c 1-0051: failed to request alarm irq
    rtc-pcf2127-i2c: probe of 1-0051 failed with error -22

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200915073213.12779-1-biwen.li@oss.nxp.com
2020-09-15 12:25:44 +02:00
Thomas Bogendoerfer
9f8010e71f rtc: ds1685: Fix bank switching to avoid endless loop
ds1685_rtc_begin_data_access() tried to access an extended register before
enabling access to it by switching to bank 1. Depending on content in NVRAM
this could lead to an endless loop. While at it fix also switch back to
bank 0 in ds1685_rtc_end_data_access().

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20200910084124.138560-1-tsbogend@alpha.franken.de
2020-09-15 11:24:29 +02:00
Rikard Falkeborn
d0a3b65052 rtc: st-lpc: Constify st_rtc_ops
The only usage of st_rtc_ops is to assign its address to the ops field
in the rtc_device struct. which is a const pointer. Make it const to
allow the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200913122644.35515-1-rikard.falkeborn@gmail.com
2020-09-15 11:21:50 +02:00
Bartosz Golaszewski
2fc1af3095 rtc: rx8010: use range checking provided by core RTC code
We don't need to check the time range manually in set_time(), we can
use range_min and range_max exposed by struct rtc_device.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-15-brgl@bgdev.pl
2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
9868bc1ce2 rtc: rx8010: convert to using regmap
This driver requires SMBUS to work. We can relax this requirement if we
switch to using i2c regmap and let the regmap sub-system figure out how
to talk to the bus.

This also has the advantage of shrinking the code for register updates.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-14-brgl@bgdev.pl
2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
cee015d90d rtc: rx8010: switch to using the preferred i2c API
We should generally use probe_new instead of probe when registering i2c
drivers. Convert rx8010 to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-13-brgl@bgdev.pl
2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
0ce627785a rtc: rx8010: switch to using the preferred RTC API
Use devm_rtc_allocate_device() + rtc_register_device() instead of the
deprecated devm_rtc_device_register().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-12-brgl@bgdev.pl
2020-09-15 10:50:38 +02:00
Bartosz Golaszewski
666f21413b rtc: rx8010: prefer sizeof(*val) over sizeof(struct type_of_val)
Using the size of the variable is preferred over using the size of its
type when allocating memory. Convert the call to devm_kzalloc() in
probe().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-11-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
955a123c14 rtc: rx8010: use a helper variable for client->dev in probe()
Simple 'dev' looks better then repeated &client->dev and has the added
benefit of avoiding unnecessary line breaks.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-10-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
b3ff7fd68d rtc: rx8010: drop unnecessary initialization
The 'err' local variable in rx8010_init_client() doesn't need to be
initialized.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-9-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
f702699c67 rtc: rx8010: don't use magic values for time buffer length
The time buffer len is used directly in this driver. For readability
it's better to define it as the difference between the date register
offsets and use sizeof() whenever referencing it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-8-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
13952c9e35 rtc: rx8010: rename ret to err in rx8010_set_time()
All other functions in this driver use 'err' for integer return values.
Do the same in rx8010_set_time() for consistency.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-7-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
e9e4c2dae4 rtc: rx8010: use tabs instead of spaces for code formatting
The define values in this driver are close to their names and they are
separated by spaces. Use tabs instead and align all defines.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-6-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
7567797199 rtc: rx8010: consolidate local variables of the same type
Move local variables of the same type into a single line for better
readability.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-5-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
28c86f30c9 rtc: rx8010: remove unnecessary brackets
Remove brackets wherever they guard a single line.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-4-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
2e0ce56910 rtc: rx8010: remove a stray newline
Remove an unnecessary newline after requesting the interrupt.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200914154601.32245-3-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Bartosz Golaszewski
d3b14296da rtc: rx8010: don't modify the global rtc ops
The way the driver is implemented is buggy for the (admittedly unlikely)
use case where there are two RTCs with one having an interrupt configured
and the second not. This is caused by the fact that we use a global
rtc_class_ops struct which we modify depending on whether the irq number
is present or not.

Fix it by using two const ops structs with and without alarm operations.
While at it: not being able to request a configured interrupt is an error
so don't ignore it and bail out of probe().

Fixes: ed13d89b08 ("rtc: Add Epson RX8010SJ RTC driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
2020-09-15 10:50:37 +02:00
Krzysztof Kozlowski
c52d270c68 rtc: s3c: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200830080937.14367-1-krzk@kernel.org
2020-09-15 10:42:36 +02:00
Gustavo A. R. Silva
df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Peng Ma
0d982de3e2 rtc: fsl-ftm-alarm: update acpi device id
Original device id would conflict with crypto driver, change it.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200818063609.39859-1-ran.wang_1@nxp.com
2020-08-21 00:20:38 +02:00
Chris Packham
f471b05f76 rtc: ds1307: Clear OSF flag on DS1388 when setting time
Ensure the OSF flag is cleared on the DS1388 when the clock is set.

Fixes: df11b323b1 ("rtc: ds1307: handle oscillator failure flags for ds1388 variant")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200818013543.4283-1-chris.packham@alliedtelesis.co.nz
2020-08-21 00:19:55 +02:00
Chris Packham
59ed012715 rtc: ds1307: Ensure oscillator is enabled for DS1388
Similar to the other variants the DS1388 has a bit to stop the
oscillator to reduce the power consumption from VBAT. Ensure that the
oscillator is enabled when the system is up.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200816235731.21071-1-chris.packham@alliedtelesis.co.nz
2020-08-21 00:19:04 +02:00
Geert Uytterhoeven
163a512cd9 rtc: rtc-rs5c313: Convert to module_platform_driver()
Reduce boilerplate by using the module_platform_driver() helper.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814110731.29029-4-geert+renesas@glider.be
2020-08-21 00:13:44 +02:00
Geert Uytterhoeven
f65e727464 rtc: rtc-rs5c313: Fix late hardware init
rs5c313_rtc_init() calls platform_driver_register(), and initializes the
hardware.  This is wrong because of two reasons:
  1. As soon as the driver has been registered, the device may be
     probed.  If devm_rtc_device_register() is called before hardware
     initialization, reading the current time will fail:

	rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error
	rs5c313 rs5c313: registered as rtc0
	rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error
	rs5c313 rs5c313: hctosys: unable to read the hardware clock

  2. If the platform device does not exist, the driver will still write
     to a hardware device that may not be present.

Fix this by moving the hardware initialization sequence to the driver's
.probe() method.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814110731.29029-3-geert+renesas@glider.be
2020-08-21 00:13:44 +02:00
Geert Uytterhoeven
fc9656a370 rtc: rtc-rs5c313: Drop obsolete platform_set_drvdata() call
Commit 284e2fa1da ("rtc: rtc-rs5c313: use
devm_rtc_device_register()"), removed the last user of the
driver-specific data.  Hence there is no longer a need to set it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814110731.29029-2-geert+renesas@glider.be
2020-08-21 00:13:44 +02:00
Victor Ding
c254bcd723 rtc: cmos: zero-init wkalrm when reading from CMOS
cmos_read_alarm() may leave certain fields of a struct rtc_wkalrm
untouched; therefore, these fields contain garbage if not properly
initialized, leading to inconsistent values when converting into
time64_t. This patch to zero initialize the struct before calling
cmos_read_alarm().

Note that this patch is not intended to produce a correct time64_t, it
is only to produce a consistent value. In the case of suspend/resume, a
correct time64_t is not necessary; a consistent value is sufficient to
correctly perform an equality test for t_current_expires and
t_saved_expires. Logic to deduce a correct time64_t is expensive and
hence should be avoided.

Signed-off-by: Victor Ding <victording@google.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200814191654.v2.1.Iaf7638a2f2a87ff68d85fcb8dec615e41340c97f@changeid
2020-08-21 00:10:33 +02:00
Linus Torvalds
dc06fe51d2 RTC for 5.9
Drivers:
  - ds1374: use watchdog core
  - pcf2127: add alarm and pcf2129 support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl80X2sACgkQ2wIijOdR
 NOVP6A//Zbvv9M0NpB84u2LAc4e4C3Al4K4zRNVlM/lb8DHwbaaV54zUhm4YOVzr
 eG7ovpby2p31/YKnheImVlsbhoirM8RUgO1hZzlLPwsCRbAqCDHRlimUsKoAXyhm
 swnDVbaf3X5JTRotmRs+oaokFN5rE88f0BHkVva8hQB/86JJe21fYutEPDMWDe+Q
 DndYMc4KcsfcSvCUFn+N7dYmGtIQPiQXPqWJ4RDTL8PRPVuVz+wPD26pKgMX7ueG
 lExSIwuj8uSojv24z26z3e20ucyF4lDGULCwfcYewgSv81tWAqwQ+LGYMbq/KJmQ
 sSw2JrrOFR30ko6OAnb1QmgEibiPesrcDYTDEhj4XpmoMuHmOemIkdWe0kB5I6Ew
 Fr/mbyUwo0/F6JpwOTJhnk26LzU/BZvTEeneMr9utPPgVREbIUXHacggT5QWZCRL
 q7yZ/25nylHdoqyQVTsZ3SUTSId9VOS+Nq8RT5mUI1sluMa84r5DO8eNv345Gt2b
 m+s+T3vDW0q1P95ZiOeZnLFz5karphPluiQP0Cw84ZN8hXlhMJQWT9C9Pn5hPKfP
 nZf572vGoM2eSo0JavGLL+W6ay54QFS3Vf45zl3OuFwAAtmvRDLlLm6cOIr2qohk
 ddrZgBp+5Xf1LMGNxUy8TgUwqZvtiBfSQ1cI3Mt4wAo8W5tP4/s=
 =ZEHC
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle - mostly non urgent driver fixes:

   - ds1374: use watchdog core

   - pcf2127: add alarm and pcf2129 support"

* tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: pcf2127: fix alarm handling
  rtc: pcf2127: add alarm support
  rtc: pcf2127: add pca2129 device id
  rtc: max77686: Fix wake-ups for max77620
  rtc: ds1307: provide an indication that the watchdog has fired
  rtc: ds1374: remove unused define
  rtc: ds1374: fix RTC_DRV_DS1374_WDT dependencies
  rtc: cleanup obsolete comment about struct rtc_class_ops
  rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable
  rtc: ds1374: wdt: Use watchdog core for watchdog part
  rtc: Replace HTTP links with HTTPS ones
  rtc: goldfish: Enable interrupt in set_alarm() when necessary
  rtc: max77686: Do not allow interrupt to fire before system resume
  rtc: imxdi: fix trivial typos
  rtc: cpcap: fix range
2020-08-12 17:17:00 -07:00
Alexandre Belloni
27006416be rtc: pcf2127: fix alarm handling
Fix multiple issues when handling alarms:
 - Use threaded interrupt to avoid scheduling when atomic
 - Stop matching on week day as it may not be set correctly
 - Avoid parsing the DT interrupt and use what is provided by the i2c or
   spi subsystem
 - Avoid returning IRQ_NONE in case of error in the interrupt handler
 - Never write WDTF as specified in the datasheet
 - Set uie_unsupported, as for the pcf85063, setting alarms every seconds
   is not working correctly and confuses the RTC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200812085114.474903-1-alexandre.belloni@bootlin.com
2020-08-12 11:48:29 +02:00
Liam Beguin
8a914bac44 rtc: pcf2127: add alarm support
Add alarm support for the pcf2127 RTC chip family.
Tested on pca2129.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20200630024211.12782-3-liambeguin@gmail.com
2020-08-12 11:37:37 +02:00