We want to reuse this completion, and a single complete should do just
fine. Ensure that we park ourselves first if requested, as that is what
lead to the initial deadlock in this area. If we've got someone attempting
to park us, then we can't proceed without having them finish first.
Fixes: 37d1e2e364 ("io_uring: move SQPOLL thread io-wq forked worker")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_try_cancel_requests() matches not only current's requests, but
also of other exiting tasks, so we need to actively cancel them and not
just wait, especially since the function can be called on flush during
do_exit() -> exit_files().
Even if it's not a problem for now, it's much nicer to know that the
function tries to cancel everything it can.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we fail to fork an SQPOLL worker, we can hit cancel, and hence
attempted thread stop, with the thread already being stopped. Ensure
we check for that.
Also guard thread stop fully by the sqd mutex, just like we do for
park.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are already freeing the wq struct in both spots, so don't put it and
get it freed twice.
Reported-by: syzbot+7bf785eedca35ca05501@syzkaller.appspotmail.com
Fixes: 4fb6ac3262 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The manager waits for the workers, hence the manager is always valid if
workers are running. Now also have wq destroy wait for the manager on
exit, so we now everything is gone.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a leftover from a different use cases, it's used to wait for
the manager to startup. Rename it as such.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're in the process of shutting down the async context, then don't
create new workers if we already have at least the fixed one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having to wait separately on workers and manager, just have
the manager wait on the workers. We use an atomic_t for the reference
here, as we need to start at 0 and allow increment from that. Since the
number of workers is naturally capped by the allowed nr of processes,
and that uses an int, there is no risk of overflow.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As per Intel vt-d spec, Rev 3.0 (section 10.4.45 "Virtual Command Response
Register"), the status code of "No PASID available" error in response to
the Allocate PASID command is 2, not 1. The same for "Invalid PASID" error
in response to the Free PASID command.
We will otherwise see confusing kernel log under the command failure from
guest side. Fix it.
Fixes: 24f27d32ab ("iommu/vt-d: Enlightened PASID allocation")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210227073909.432-1-yuzenghui@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The lazy IOTLB flushing setup leaves a time window, in which the device
can still access some system memory, which has already been unmapped by
the device driver. It's not suitable for untrusted devices. A malicious
device might use this to attack the system by obtaining data that it
shouldn't obtain.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210225061454.2864009-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 25938c73cd ("iommu/tegra-smmu: Rework tegra_smmu_probe_device()")
removed certain hack in the tegra_smmu_probe() by relying on IOMMU core to
of_xlate SMMU's SID per device, so as to get rid of tegra_smmu_find() and
tegra_smmu_configure() that are typically done in the IOMMU core also.
This approach works for both existing devices that have DT nodes and other
devices (like PCI device) that don't exist in DT, on Tegra210 and Tegra3
upon testing. However, Page Fault errors are reported on tegra124-Nyan:
tegra-mc 70019000.memory-controller: display0a: read @0xfe056b40:
EMEM address decode error (SMMU translation error [--S])
tegra-mc 70019000.memory-controller: display0a: read @0xfe056b40:
Page fault (SMMU translation error [--S])
After debugging, I found that the mentioned commit changed some function
callback sequence of tegra-smmu's, resulting in enabling SMMU for display
client before display driver gets initialized. I couldn't reproduce exact
same issue on Tegra210 as Tegra124 (arm-32) differs at arch-level code.
Actually this Page Fault is a known issue, as on most of Tegra platforms,
display gets enabled by the bootloader for the splash screen feature, so
it keeps filling the framebuffer memory. A proper fix to this issue is to
1:1 linear map the framebuffer memory to IOVA space so the SMMU will have
the same address as the physical address in its page table. Yet, Thierry
has been working on the solution above for a year, and it hasn't merged.
Therefore, let's partially revert the mentioned commit to fix the errors.
The reason why we do a partial revert here is that we can still set priv
in ->of_xlate() callback for PCI devices. Meanwhile, devices existing in
DT, like display, will go through tegra_smmu_configure() at the stage of
bus_set_iommu() when SMMU gets probed(), as what it did before we merged
the mentioned commit.
Once we have the linear map solution for framebuffer memory, this change
can be cleaned away.
[Big thank to Guillaume who reported and helped debugging/verification]
Fixes: 25938c73cd ("iommu/tegra-smmu: Rework tegra_smmu_probe_device()")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210218220702.1962-1-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
increase_address_space() calls get_zeroed_page(gfp) under spin_lock with
disabled interrupts. gfp flags passed to increase_address_space() may allow
sleeping, so it comes to this:
BUG: sleeping function called from invalid context at mm/page_alloc.c:4342
in_atomic(): 1, irqs_disabled(): 1, pid: 21555, name: epdcbbf1qnhbsd8
Call Trace:
dump_stack+0x66/0x8b
___might_sleep+0xec/0x110
__alloc_pages_nodemask+0x104/0x300
get_zeroed_page+0x15/0x40
iommu_map_page+0xdd/0x3e0
amd_iommu_map+0x50/0x70
iommu_map+0x106/0x220
vfio_iommu_type1_ioctl+0x76e/0x950 [vfio_iommu_type1]
do_vfs_ioctl+0xa3/0x6f0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4e/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by moving get_zeroed_page() out of spin_lock/unlock section.
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210217143004.19165-1-arbn@yandex-team.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
the register offset isn't needed division by 4 to pass RREG32_PCIE()
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Currently if stream->signal is neither SIGNAL_TYPE_DISPLAY_PORT_MST or
SIGNAL_TYPE_DISPLAY_PORT then variable ret is uninitialized and this is
checked for > 0 at the end of the function. Ret should be initialized,
I believe setting it to zero is a correct default.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: bd0c064c16 ("drm/amd/display: Add return code instead of boolean for future use")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It works fine and was only disabled because primary GPUs
don't enter runpm if there is a console bound to the fbdev due
to the kmap. This will at least allow runpm on secondary cards.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arcturus has a different register address from other SMU V11
ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Per discussions with PMFW team, the driver only needs to
notify the PMFW when the RLC is disabled. The RLC FW will notify
the PMFW directly when it's enabled.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Making them an error confuses users and the errors are harmless
as not all asics support all profiles.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi12 0x7360/C7 SKU has no video support, so remove it.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Asher.Song <Asher.Song@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The S0ix check only makes sense if the AMD PMC driver is
present. We need to use the legacy S3 pathes when the
PMC driver is not present.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 8b9d680258 ("ACPI: Constify acpi_bus helper functions,
switch to macros") only changed functions for CONFIG_ACPI=y case.
This part adjusts the rest.
Fixes: 8b9d680258 ("ACPI: Constify acpi_bus helper functions, switch to macros")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following W=1 compilation warning:
drivers/infiniband/core/uverbs_ioctl.c:108: warning: expecting prototype for uverbs_alloc(). Prototype was for _uverbs_alloc() instead
Fixes: 461bb2eee4 ("IB/uverbs: Add a simple allocator to uverbs_attr_bundle")
Link: https://lore.kernel.org/r/20210302074214.1054299-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The W=1 allmodconfig build produces the following warning:
drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line:
* Parse a series of data segments for page fault handling.
Fix it by changing /** to be /* as it is written in kernel-doc
documentation.
Fixes: 5e769e444d ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'")
Link: https://lore.kernel.org/r/20210302074214.1054299-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Somewhere along the line, probably during a rebase, an unintentional
dump_stack() got included. Revert this change.
Reported-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Fixes: 90cba8d20f ("tpm/ppi: Constify static struct attribute_group")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The copy_to_user() function returns the number of bytes remaining but
we want to return -EFAULT to the user if it can't complete the copy.
The "st" variable only holds zero on success or negative error codes on
failure so the type should be int.
Fixes: 36f988e978 ("rsxx: Adding in debugfs entries.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds a new SND_PCI_QUIRK(...) and applies it to the Intel NUC 10
devices. This fixes the issue of the devices not having audio input and
output on the headset jack because the kernel does not recognize when
something is plugged in.
The new quirk was inspired by the quirk for the Intel NUC 8 devices, but
it turned out that the NUC 10 uses another pin. This information was
acquired by black box testing likely pins.
Co-developed-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210302180414.23194-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 9e2369c06c ("xen: add helpers to allocate unpopulated
memory") foreign mappings are using guest physical addresses allocated
via ZONE_DEVICE functionality.
This will result in problems for the case of no balloon memory hotplug
being configured, as the p2m list will only cover the initial memory
size of the domain. Any ZONE_DEVICE allocated address will be outside
the p2m range and thus a mapping can't be established with that memory
address.
Fix that by extending the p2m size for that case. At the same time add
a check for a to be created mapping to be within the p2m limits in
order to detect errors early.
While changing a comment, remove some 32-bit leftovers.
This is XSA-369.
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Cc: <stable@vger.kernel.org> # 5.9
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 3194a1746e ("xen-netback: don't "handle" error by BUG()")
dropped respective a BUG_ON() without noticing that with this the
variable's value wouldn't be consumed anymore. With gnttab_set_map_op()
setting all status fields to a non-zero value, in case of an error no
slot should have a status of GNTST_okay (zero).
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.
HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.
Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.
The map ops' handle fields get overwritten just to be on the safe side.
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----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=fEry
-----END PGP SIGNATURE-----
Merge tag 'misc-5.12-2021-03-02' of git://git.kernel.dk/linux-block
Pull misc fixes from Jens Axboe:
"Two misc fixes that don't belong in other branches:
- Fix a regression with ia64 signals, introduced by the
TIF_NOTIFY_SIGNAL change in 5.11.
- Fix the current swapfile regression from this merge window"
* tag 'misc-5.12-2021-03-02' of git://git.kernel.dk/linux-block:
swap: fix swapfile read/write offset
ia64: don't call handle_signal() unless there's actually a signal queued
We're not factoring in the start of the file for where to write and
read the swapfile, which leads to very unfortunate side effects of
writing where we should not be...
Fixes: 48d15436fd ("mm: remove get_swap_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sergei and John both reported that ia64 failed to boot in 5.11, and it
was related to signals. Turns out the ia64 signal handling is a bit odd,
it doesn't check the return value of get_signal() for whether there's a
signal to deliver or not. With the introduction of TIF_NOTIFY_SIGNAL,
then task_work could trigger it.
Fix it by only calling handle_signal() if we actually have a real signal
to deliver. This brings it in line with all other archs, too.
Fixes: b269c229b0 ("ia64: add support for TIF_NOTIFY_SIGNAL")
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On little endian system, Use aarch64_be(gcc v7.3) downloaded from
linaro.org to build image with CONFIG_CPU_BIG_ENDIAN = y,
CONFIG_FTRACE = y, CONFIG_DYNAMIC_FTRACE = y.
gcc will create symbols of _mcount but recordmcount can not create
mcount_loc for *.o.
aarch64_be-linux-gnu-objdump -r fs/namei.o | grep mcount
00000000000000d0 R_AARCH64_CALL26 _mcount
...
0000000000007190 R_AARCH64_CALL26 _mcount
The reason is than funciton arm64_is_fake_mcount can not work correctly.
A symbol of _mcount in *.o compiled with big endian compiler likes:
00 00 00 2d 00 00 01 1b
w(rp->r_info) will return 0x2d instead of 0x011b. Because w() takes
uint32_t as parameter, which truncates rp->r_info.
Use w8() instead w() to read relp->r_info
Link: https://lkml.kernel.org/r/20210222135840.56250-1-chenjun102@huawei.com
Fixes: ea0eada456 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.")
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a quite huge "uncorrectable error in header" flood in KMSG
on a clean system boot since there is no pstore buffer saved in RAM.
Let's silence the redundant noisy messages by rate-limiting the printk
message. Now there are maximum 10 messages printed repeatedly instead
of 35+.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210302095850.30894-1-digetx@gmail.com
This problem was reported on a SVM guest while executing kexec.
Kexec fails to load the new kernel when the PCID feature is enabled.
When kexec starts loading the new kernel, it starts the process by
resetting the vCPU's and then bringing each vCPU online one by one.
The vCPU reset is supposed to reset all the register states before the
vCPUs are brought online. However, the CR4 register is not reset during
this process. If this register is already setup during the last boot,
all the flags can remain intact. The X86_CR4_PCIDE bit can only be
enabled in long mode. So, it must be enabled much later in SMP
initialization. Having the X86_CR4_PCIDE bit set during SMP boot can
cause a boot failures.
Fix the issue by resetting the CR4 register in init_vmcb().
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161471109108.30811.6392805173629704166.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When clearing the per-vCPU shared regions, set the return value to zero
to indicate success. This was causing spurious errors to be returned to
userspace on soft reset.
Also add a paranoid BUILD_BUG_ON() for compat structure compatibility.
Fixes: 0c165b3c01 ("KVM: x86/xen: Allow reset of Xen attributes")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vcpu mmap area may consist of more than just the kvm_run struct.
Allocate enough space for the entire vcpu mmap area. Without this, on
x86, the PIO page, for example, will be missing. This is problematic
when dealing with an unhandled exception from the guest as the exception
vector will be incorrectly reported as 0x0.
Message-Id: <20210210165035.3712489-1-aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Co-developed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It should be 7.23 instead of 7.22, which has already been taken by
KVM_CAP_X86_BUS_LOCK_EXIT.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20210226094832.380394-1-kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Xen hypercall interface adds to the attack surface of the hypervisor
and will be used quite rarely. Allow compiling it out.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correct the comments since bfq_fifo_expire[0] is for async request,
while bfq_fifo_expire[1] is for sync request.
Also update docs, according the source code, the default
fifo_expire_async is 250ms, and fifo_expire_sync is 125ms.
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the platform set the dyn_pcm_assign to true, it will call
hdmi_find_pcm_slot() to find a pcm slot when hdmi/dp monitor is
connected and need to create a pcm.
So far only intel_hsw_common_init() and patch_nvhdmi() set the
dyn_pcm_assign to true, here we let tgl platforms assign the pcm slot
dynamically first, if the driver runs for a period of time and there
is no regression reported, we could set no_fixed_assgin to true in
the intel_hsw_common_init(), and then set it to true in the
patch_nvhdmi().
This change comes from the discussion between Takashi and
Kai Vehmanen. Please refer to:
https://github.com/alsa-project/alsa-lib/pull/118
Suggested-and-reviewed-by: Takashi Iwai <tiwai@suse.de>
Suggested-and-reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210301111202.2684-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This applies a SND_PCI_QUIRK(...) to the Clevo NH55RZQ barebone. This
fixes the issue of the device not recognizing a pluged in microphone.
The device has both, a microphone only jack, and a speaker + microphone
combo jack. The combo jack already works. The microphone-only jack does
not recognize when a device is pluged in without this patch.
Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/0eee6545-5169-ef08-6cfa-5def8cd48c86@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In January, Intel kbuild bot and Arnd Bergmann reported multiple
issues with randconfig. This patchset builds on Arnd's suggestions to
a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev
and sof-pci-dev become helpers. This will result in minor changes
required for developers/testers, i.e. modprobe snd-sof-pci will no
longer result in a probe. The SOF CI was already updated to deal with
this module dependency change and introduction of new modules.
b) Fix SOF/SoundWire/DSP_config dependencies by moving the code
required to detect SoundWire presence in ACPI tables to sound/hda.
Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=ttBB
-----END PGP SIGNATURE-----
Merge tag 'tags/sound-sdw-kconfig-fixes' into for-linus
ALSA/ASoC/SOF/SoundWire: fix Kconfig issues
In January, Intel kbuild bot and Arnd Bergmann reported multiple
issues with randconfig. This patchset builds on Arnd's suggestions to
a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev
and sof-pci-dev become helpers. This will result in minor changes
required for developers/testers, i.e. modprobe snd-sof-pci will no
longer result in a probe. The SOF CI was already updated to deal with
this module dependency change and introduction of new modules.
b) Fix SOF/SoundWire/DSP_config dependencies by moving the code
required to detect SoundWire presence in ACPI tables to sound/hda.
Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
[BUG]
When running fstresss, we can hit strange data csum mismatch where the
on-disk data is in fact correct (passes scrub).
With some extra debug info added, we have the following traces:
0482us: btrfs_do_readpage: root=5 ino=284 offset=393216, submit force=0 pgoff=0 iosize=8192
0494us: btrfs_do_readpage: root=5 ino=284 offset=401408, submit force=0 pgoff=8192 iosize=4096
0498us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=393216 len=8192
0591us: btrfs_do_readpage: root=5 ino=284 offset=405504, submit force=0 pgoff=12288 iosize=36864
0594us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=401408 len=4096
0863us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=405504 len=36864
0933us: btrfs_verify_data_csum: root=5 ino=284 offset=393216 len=8192
0967us: btrfs_do_readpage: root=5 ino=284 offset=442368, skip beyond isize pgoff=49152 iosize=16384
1047us: btrfs_verify_data_csum: root=5 ino=284 offset=401408 len=4096
1163us: btrfs_verify_data_csum: root=5 ino=284 offset=405504 len=36864
1290us: check_data_csum: !!! root=5 ino=284 offset=438272 pg_off=45056 !!!
7387us: end_bio_extent_readpage: root=5 ino=284 before pending_read_bios=0
[CAUSE]
Normally we expect all submitted bio reads to only touch the range we
specified, and under subpage context, it means we should only touch the
range specified in each bvec.
But in data read path, inside end_bio_extent_readpage(), we have page
zeroing which only takes regular page size into consideration.
This means for subpage if we have an inode whose content looks like below:
0 16K 32K 48K 64K
|///////| |///////| |
|//| = data needs to be read from disk
| | = hole
And i_size is 64K initially.
Then the following race can happen:
T1 | T2
--------------------------------+--------------------------------
btrfs_do_readpage() |
|- isize = 64K; |
| At this time, the isize is |
| 64K |
| |
|- submit_extent_page() |
| submit previous assembled bio|
| assemble bio for [0, 16K) |
| |
|- submit_extent_page() |
submit read bio for [0, 16K) |
assemble read bio for |
[32K, 48K) |
|
| btrfs_setsize()
| |- i_size_write(, 16K);
| Now i_size is only 16K
end_io() for [0K, 16K) |
|- end_bio_extent_readpage() |
|- btrfs_verify_data_csum() |
| No csum error |
|- i_size = 16K; |
|- zero_user_segment(16K, |
PAGE_SIZE); |
!!! We zeroed range |
!!! [32K, 48K) |
| end_io for [32K, 48K)
| |- end_bio_extent_readpage()
| |- btrfs_verify_data_csum()
| ! CSUM MISMATCH !
| ! As the range is zeroed now !
[FIX]
To fix the problem, make end_bio_extent_readpage() to only zero the
range of bvec.
The bug only affects subpage read-write support, as for full read-only
mount we can't change i_size thus won't hit the race condition.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have smack enabled, during the creation of a directory smack may
attempt to add a "smack transmute" xattr on the inode, which results in
the following warning and trace:
WARNING: CPU: 3 PID: 2548 at fs/btrfs/transaction.c:537 start_transaction+0x489/0x4f0
Modules linked in: nft_objref nf_conntrack_netbios_ns (...)
CPU: 3 PID: 2548 Comm: mkdir Not tainted 5.9.0-rc2smack+ #81
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:start_transaction+0x489/0x4f0
Code: e9 be fc ff ff (...)
RSP: 0018:ffffc90001887d10 EFLAGS: 00010202
RAX: ffff88816f1e0000 RBX: 0000000000000201 RCX: 0000000000000003
RDX: 0000000000000201 RSI: 0000000000000002 RDI: ffff888177849000
RBP: ffff888177849000 R08: 0000000000000001 R09: 0000000000000004
R10: ffffffff825e8f7a R11: 0000000000000003 R12: ffffffffffffffe2
R13: 0000000000000000 R14: ffff88803d884270 R15: ffff8881680d8000
FS: 00007f67317b8440(0000) GS:ffff88817bcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f67247a22a8 CR3: 000000004bfbc002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? slab_free_freelist_hook+0xea/0x1b0
? trace_hardirqs_on+0x1c/0xe0
btrfs_setxattr_trans+0x3c/0xf0
__vfs_setxattr+0x63/0x80
smack_d_instantiate+0x2d3/0x360
security_d_instantiate+0x29/0x40
d_instantiate_new+0x38/0x90
btrfs_mkdir+0x1cf/0x1e0
vfs_mkdir+0x14f/0x200
do_mkdirat+0x6d/0x110
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f673196ae6b
Code: 8b 05 11 (...)
RSP: 002b:00007ffc3c679b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000000001ff RCX: 00007f673196ae6b
RDX: 0000000000000000 RSI: 00000000000001ff RDI: 00007ffc3c67a30d
RBP: 00007ffc3c67a30d R08: 00000000000001ff R09: 0000000000000000
R10: 000055d3e39fe930 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc3c679cd8 R14: 00007ffc3c67a30d R15: 00007ffc3c679ce0
irq event stamp: 11029
hardirqs last enabled at (11037): [<ffffffff81153fe6>] console_unlock+0x486/0x670
hardirqs last disabled at (11044): [<ffffffff81153c01>] console_unlock+0xa1/0x670
softirqs last enabled at (8864): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20
softirqs last disabled at (8851): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20
This happens because at btrfs_mkdir() we call d_instantiate_new() while
holding a transaction handle, which results in the following call chain:
btrfs_mkdir()
trans = btrfs_start_transaction(root, 5);
d_instantiate_new()
smack_d_instantiate()
__vfs_setxattr()
btrfs_setxattr_trans()
btrfs_start_transaction()
start_transaction()
WARN_ON()
--> a tansaction start has TRANS_EXTWRITERS
set in its type
h->orig_rsv = h->block_rsv
h->block_rsv = NULL
btrfs_end_transaction(trans)
Besides the warning triggered at start_transaction, we set the handle's
block_rsv to NULL which may cause some surprises later on.
So fix this by making btrfs_setxattr_trans() not start a transaction when
we already have a handle on one, stored in current->journal_info, and use
that handle. We are good to use the handle because at btrfs_mkdir() we did
reserve space for the xattr and the inode item.
Reported-by: Casey Schaufler <casey@schaufler-ca.com>
CC: stable@vger.kernel.org # 5.4+
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://lore.kernel.org/linux-btrfs/434d856f-bd7b-4889-a6ec-e81aaebfa735@schaufler-ca.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Calling btrfs_qgroup_reserve_meta_prealloc from
btrfs_delayed_inode_reserve_metadata can result in flushing delalloc
while holding a transaction and delayed node locks. This is deadlock
prone. In the past multiple commits:
* ae5e070eac ("btrfs: qgroup: don't try to wait flushing if we're
already holding a transaction")
* 6f23277a49 ("btrfs: qgroup: don't commit transaction when we already
hold the handle")
Tried to solve various aspects of this but this was always a
whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock
scenario involving btrfs_delayed_node::mutex. Namely, one thread
can call btrfs_dirty_inode as a result of reading a file and modifying
its atime:
PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test"
#0 __schedule at ffffffffa529e07d
#1 schedule at ffffffffa529e4ff
#2 schedule_timeout at ffffffffa52a1bdd
#3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held
#4 start_delalloc_inodes at ffffffffc0380db5
#5 btrfs_start_delalloc_snapshot at ffffffffc0393836
#6 try_flush_qgroup at ffffffffc03f04b2
#7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes.
#8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex
#9 btrfs_update_inode at ffffffffc0385ba8
#10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED
#11 touch_atime at ffffffffa4cf0000
#12 generic_file_read_iter at ffffffffa4c1f123
#13 new_sync_read at ffffffffa4ccdc8a
#14 vfs_read at ffffffffa4cd0849
#15 ksys_read at ffffffffa4cd0bd1
#16 do_syscall_64 at ffffffffa4a052eb
#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c
This will cause an asynchronous work to flush the delalloc inodes to
happen which can try to acquire the same delayed_node mutex:
PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30"
#0 __schedule at ffffffffa529e07d
#1 schedule at ffffffffa529e4ff
#2 schedule_preempt_disabled at ffffffffa529e80a
#3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up.
#4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex
#5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding
#6 cow_file_range_inline.constprop.78 at ffffffffc0386be7
#7 cow_file_range at ffffffffc03879c1
#8 btrfs_run_delalloc_range at ffffffffc038894c
#9 writepage_delalloc at ffffffffc03a3c8f
#10 __extent_writepage at ffffffffc03a4c01
#11 extent_write_cache_pages at ffffffffc03a500b
#12 extent_writepages at ffffffffc03a6de2
#13 do_writepages at ffffffffa4c277eb
#14 __filemap_fdatawrite_range at ffffffffa4c1e5bb
#15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes
#16 normal_work_helper at ffffffffc03b706c
#17 process_one_work at ffffffffa4aba4e4
#18 worker_thread at ffffffffa4aba6fd
#19 kthread at ffffffffa4ac0a3d
#20 ret_from_fork at ffffffffa54001ff
To fully address those cases the complete fix is to never issue any
flushing while holding the transaction or the delayed node lock. This
patch achieves it by calling qgroup_reserve_meta directly which will
either succeed without flushing or will fail and return -EDQUOT. In the
latter case that return value is going to be propagated to
btrfs_dirty_inode which will fallback to start a new transaction. That's
fine as the majority of time we expect the inode will have
BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly
copying the in-memory state.
Fixes: c53e965360 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
