mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 08:31:55 +00:00
eaf0e7a3d2
230 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
9187210eee |
Networking changes for 6.9.
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
||
|
Linus Torvalds
|
ff887eb07c |
workqueue: Changes for v6.9
This cycle, a lot of workqueue changes including some that are significant and invasive. - During v6.6 cycle, unbound workqueues were updated so that they are more topology aware and flexible, which among other things improved workqueue behavior on modern multi-L3 CPUs. In the process, |
||
Miguel Ojeda
|
768409cff6 |
rust: upgrade to Rust 1.76.0
This is the next upgrade to the Rust toolchain, from 1.75.0 to 1.76.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit
|
||
|
Miguel Ojeda
|
ecab4115c4 |
kbuild: mark rustc (and others) invocations as recursive
`rustc` (like Cargo) may take advantage of the jobserver at any time (e.g. for backend parallelism, or eventually frontend too). In the kernel, we call `rustc` with `-Ccodegen-units=1` (and `-Zthreads` is 1 so far), so we do not expect parallelism. However, in the upcoming Rust 1.76.0, a warning is emitted by `rustc` [1] when it cannot connect to the jobserver it was passed (in many cases, but not all: compiling and `--print sysroot` do, but `--version` does not). And given GNU Make always passes the jobserver in the environment variable (even when a line is deemed non-recursive), `rustc` will end up complaining about it (in particular in Make 4.3 where there is only the simple pipe jobserver style). One solution is to remove the jobserver from `MAKEFLAGS`. However, we can mark the lines with calls to `rustc` (and Cargo) as recursive, which looks simpler. This is being documented as a recommendation in `rustc` [2] and allows us to be ready for the time we may use parallelism inside `rustc` (potentially now, if a user passes `-Zthreads`). Thus do so. Similarly, do the same for `rustdoc` and `cargo` calls. Finally, there is one case that the solution does not cover, which is the `$(shell ...)` call we have. Thus, for that one, set an empty `MAKEFLAGS` environment variable. Link: https://github.com/rust-lang/rust/issues/120515 [1] Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://github.com/rust-lang/rust/pull/121564 [2] Link: https://lore.kernel.org/r/20240217002638.57373-1-ojeda@kernel.org [ Reworded to add link to PR documenting the recommendation. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Wedson Almeida Filho
|
e944171070 |
rust: add container_of! macro
This macro is used to obtain a pointer to an entire struct when given a pointer to a field in that struct. Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Matt Gilbride <mattgilbride@google.com> Link: https://lore.kernel.org/r/20240219-b4-rbtree-v2-1-0b113aab330d@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Yutaro Ohno
|
4951ddd51b |
rust: str: implement Display and Debug for BStr
Currently, `BStr` is just a type alias of `[u8]`, limiting its representation to a byte list rather than a character list, which is not ideal for printing and debugging. Implement `Display` and `Debug` traits for `BStr` to facilitate easier printing and debugging. Also, for this purpose, change `BStr` from a type alias of `[u8]` to a struct wrapper of `[u8]`. Co-developed-by: Virgile Andreani <armavica@ulminfo.fr> Signed-off-by: Virgile Andreani <armavica@ulminfo.fr> Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/ZcSlGMGP-e9HqybA@ohnotp [ Formatted code comment. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Thomas Bertschinger
|
1b6170ff7a |
rust: module: place generated init_module() function in .init.text
Currently Rust kernel modules have their init code placed in the `.text` section of the .ko file. I don't think this causes any real problems for Rust modules as long as all code called during initialization lives in `.text`. However, if a Rust `init_module()` function (that lives in `.text`) calls a function marked with `__init` (in C) or `#[link_section = ".init.text"]` (in Rust), then a warning is generated by modpost because that function lives in `.init.text`. For example: WARNING: modpost: fs/bcachefs/bcachefs: section mismatch in reference: init_module+0x6 (section: .text) -> _RNvXCsj7d3tFpT5JS_15bcachefs_moduleNtB2_8BcachefsNtCsjDtqRIL3JAG_6kernel6Module4init (section: .init.text) I ran into this while experimenting with converting the bcachefs kernel module from C to Rust. The module's `init()`, written in Rust, calls C functions like `bch2_vfs_init()` which are placed in `.init.text`. This patch places the macro-generated `init_module()` Rust function in the `.init.text` section. It also marks `init_module()` as unsafe--now it may not be called after module initialization completes because it may be freed already. Note that this is not enough on its own to actually get all the module initialization code in that section. The module author must still add the `#[link_section = ".init.text"]` attribute to the Rust `init()` in the `impl kernel::Module` block in order to then call `__init` functions. However, this patch enables module authors do so, when previously it would not be possible (without warnings). Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240206153806.567055-1-tahbertschinger@gmail.com [ Reworded title to add prefix. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Obei Sideg
|
5bc818419a |
rust: types: add try_from_foreign() method
Currently `ForeignOwnable::from_foreign()` only works for non-null
pointers for the existing `impl`s (e.g. `Box`, `Arc`). In turn, this
means callers may write code like:
```rust
// `p` is a pointer that may be null.
if p.is_null() {
None
} else {
unsafe { Some(Self::from_foreign(ptr)) }
}
```
Add a `try_from_foreign()` method to the trait with a default
implementation that returns `None` if `ptr` is null, otherwise
`Some(from_foreign(ptr))`, so that it can be used by callers instead.
Link: https://github.com/Rust-for-Linux/linux/issues/1057
Signed-off-by: Obei Sideg <linux@obei.io>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/0100018d53f737f8-80c1fe97-0019-40d7-ab69-b1b192785cd7-000000@email.amazonses.com
[ Fixed intra-doc links, improved `SAFETY` comment and reworded commit. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
Alice Ryhl
|
44f2e626cb |
rust: kernel: stop using ptr_metadata feature
The `byte_sub` method was stabilized in Rust 1.75.0. By using that method, we no longer need the unstable `ptr_metadata` feature for implementing `Arc::from_raw`. This brings us one step closer towards not using unstable compiler features. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240215104601.1267763-1-aliceryhl@google.com [ Reworded title. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Alice Ryhl
|
e283ee2392 |
rust: kernel: add reexports for macros
Currently, all macros are reexported with #[macro_export] only, which means that to access `new_work!` from the workqueue, you need to import it from the path `kernel::new_work` instead of importing it from the workqueue module like all other items in the workqueue. By adding reexports of the macros, it becomes possible to import the macros from the correct modules. It's still possible to import the macros from the root, but I don't think we can do anything about that. There is no functional change. This is merely a code cleanliness improvement. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Tested-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20240129145837.1419880-1-aliceryhl@google.com [ Removed new `use kernel::prelude::*`s, reworded title. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Valentin Obst
|
ed6d0bed34 |
rust: locked_by: shorten doclink preview
Increases readability by removing `super::` from the link preview text. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-12-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
cd16c41fde |
rust: kernel: remove unneeded doclink targets
Remove explicit targets for doclinks in cases where rustdoc can determine the correct target by itself. The goal is to reduce unneeded verbosity in the source code. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-11-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
4c799d1dc8 |
rust: kernel: add doclinks
Add doclinks to existing documentation. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-10-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
6269fadf35 |
rust: kernel: add blank lines in front of code blocks
Throughout the code base, blank lines are used before starting a code block. Adapt outliers to improve consistency within the kernel crate. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-9-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
af8b18d740 |
rust: kernel: mark code fragments in docs with backticks
Fix places where comments include code fragments that are not enclosed in backticks. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-8-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
ebf2b8a75a |
rust: kernel: unify spelling of refcount in docs
Replace instances of 'ref-count[ed]' with 'refcount[ed]' to increase
consistency within the Rust documentation. The latter form is used more
widely in the rest of the kernel:
```console
$ rg '(\*|//).*?\srefcount(|ed)[\s,.]' | wc -l
1605
$ rg '(\*|//).*?\sref-count(|ed)[\s,.]' | wc -l
43
```
(numbers are for commit
|
||
|
Valentin Obst
|
4c62348d5b |
rust: str: move SAFETY comment in front of unsafe block
SAFETY comments should immediately precede the unsafe block they justify. Move assignment to `bar` past comment as it is safe. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-6-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
8cfce47d75 |
rust: str: use NUL instead of 0 in doc comments
Throughout the module, bytes with the value zero are referred to as `NUL` bytes. Adapt the only two outliers. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-5-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
ed8596532a |
rust: kernel: add srctree-relative doclinks
Convert existing references to C header files to make use of
Commit
|
||
|
Valentin Obst
|
16dca5d12e |
rust: ioctl: end top-level module docs with full stop
Every other module ends its first line of documentation with a full stop. Adapt the only outlier. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-3-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
69d5fbb015 |
rust: error: improve unsafe code in example
The `from_err_ptr` function is safe. There is no need for the call to it to be inside the unsafe block. Reword the SAFETY comment to provide a better justification of why the FFI call is safe. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-2-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Valentin Obst
|
b6cda913bb |
rust: kernel: fix multiple typos in documentation
Fixes multiple trivial typos in documentation and comments of the kernel crate. allocator: - Fix a trivial list item alignment issue in the last SAFETY comment of `krealloc_aligned`. init: - Replace 'type' with 'trait' in the doc comments of the `PinInit` and `Init` traits. - Add colons before starting lists. - Add spaces between the type and equal sign to respect the code formatting rules in example code. - End a sentence with a full stop instead of a colon. ioctl: - Replace 'an' with 'a' where appropriate. str: - Replace 'Return' with 'Returns' in the doc comment of `bytes_written` as the text describes what the function does. sync/lock: - Fix a trivial list item alignment issue in the Safety section of the `Backend` trait's description. sync/lock/spinlock: - The code in this module operates on spinlocks, not mutexes. Thus, replace 'mutex' with 'spinlock' in the SAFETY comment of `unlock`. workqueue: - Replace "wont" with "won't" in the doc comment of `__enqueue`. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-1-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Mika Westerberg
|
789809a3d5 |
rust: bindings: Order headers alphabetically
As the comment on top of the file suggests, sort the headers alphabetically. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://github.com/Rust-for-Linux/linux/issues/1002 Link: https://lore.kernel.org/r/20240216152723.993445-1-mika.westerberg@linux.intel.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
3e0bc2855b |
workqueue: rust: sync with WORK_CPU_UNBOUND change
Commit |
||
|
Alice Ryhl
|
f090f0d0ee |
rust: sync: update integer types in CondVar
Reduce the chances of compilation failures due to integer type mismatches in `CondVar`. When an integer is defined using a #define in C, bindgen doesn't know which integer type it is supposed to be, so it will just use `u32` by default (if it fits in an u32). Whenever the right type is something else, we insert a cast in Rust. However, this means that the code has a lot of extra casts, and sometimes the code will be missing casts if u32 happens to be correct on the developer's machine, even though the type might be something else on a different platform. This patch updates all uses of such constants in `rust/kernel/sync/condvar.rs` to use constants defined with the right type. This allows us to remove various unnecessary casts, while also future-proofing for the case where `unsigned int != u32` (even though that is unlikely to ever happen in the kernel). I wrote this patch at the suggestion of Benno in [1]. Link: https://lore.kernel.org/all/nAEg-6vbtX72ZY3oirDhrSEf06TBWmMiTt73EklMzEAzN4FD4mF3TPEyAOxBZgZtjzoiaBYtYr3s8sa9wp1uYH9vEWRf2M-Lf4I0BY9rAgk=@proton.me/ [1] Suggested-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Tiago Lam <tiagolam@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-4-88e0c871cc05@google.com [ Added note on the unlikeliness of `sizeof(int)` changing. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Alice Ryhl
|
e7b9b1ff1d |
rust: sync: add CondVar::wait_timeout
Sleep on a condition variable with a timeout. This is used by Rust Binder for process freezing. There, we want to sleep until the freeze operation completes, but we want to be able to abort the process freezing if it doesn't complete within some timeout. Note that it is not enough to avoid jiffies by introducing a variant of `CondVar::wait_timeout` that takes the timeout in msecs because we need to be able to restart the sleep with the remaining sleep duration if it is interrupted, and if the API takes msecs rather than jiffies, then that would require a conversion roundtrip jiffies->msecs->jiffies that is best avoided. Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Tiago Lam <tiagolam@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-3-88e0c871cc05@google.com [ Added `CondVarTimeoutResult` re-export and fixed typo. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Alice Ryhl
|
82e1708748 |
rust: time: add msecs to jiffies conversion
Defines type aliases and conversions for msecs and jiffies. This is used by Rust Binder for process freezing. There, we want to sleep until the freeze operation completes, but we want to be able to abort the process freezing if it doesn't complete within some timeout. The freeze timeout is supplied in msecs. Note that we need to convert to jiffies in Binder. It is not enough to introduce a variant of `CondVar::wait_timeout` that takes the timeout in msecs because we need to be able to restart the sleep with the remaining sleep duration if it is interrupted, and if the API takes msecs rather than jiffies, then that would require a conversion roundtrip jiffies-> msecs->jiffies that is best avoided. Suggested-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-2-88e0c871cc05@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Alice Ryhl
|
3e6454177f |
rust: sync: add CondVar::notify_sync
Wake up another thread synchronously. This method behaves like `notify_one`, except that it hints to the scheduler that the current thread is about to go to sleep, so it should schedule the target thread on the same CPU. This is used by Rust Binder as a performance optimization. When sending a transaction to a different process, we usually know which thread will handle it, so we can schedule that thread for execution next on this CPU for better cache locality. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Tiago Lam <tiagolam@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-1-88e0c871cc05@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
FUJITA Tomonori
|
599b75a3b7 |
rust: phy: use VTABLE_DEFAULT_ERROR
Since 6.8-rc1, using VTABLE_DEFAULT_ERROR for optional functions (never called) in #[vtable] is the recommended way. Note that no functional changes in this patch. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
1d4046b571 |
rust: phy: use srctree-relative links
The relative paths like the following are bothersome and don't work with `O=` builds: //! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h). This updates such links by using the `srctree`-relative link feature introduced in 6.8-rc1 like: //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h). Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Charalampos Mitrodimas
|
6b1b2326b2 |
rust: sync: CondVar rename "wait_list" to "wait_queue_head"
Fields named "wait_list" usually are of type "struct list_head". To avoid confusion and because it is of type "Opaque<bindings::wait_queue_head>" we are renaming "wait_list" to "wait_queue_head". Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240105012930.1426214-1-charmitro@posteo.net Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
c5fed8ce65 |
rust: upgrade to Rust 1.75.0
This is the next upgrade to the Rust toolchain, from 1.74.1 to 1.75.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit
|
||
|
Linus Torvalds
|
b6964fe239 |
Rust changes for v6.8
Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was fairly
small (and we did not have two upgrades).
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1.
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting.
- Support 'srctree'-relative links in Rust code documentation.
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen').
- Suppress searching builtin sysroot to avoid confusion with installed
sysroots, needed for the to-be-merged arm64 support which uses
a builtin target.
- Ignore '__preserve_most' functions for 'bindgen'.
- Reduce header inclusion bloat in exports.
'kernel' crate:
- Implement 'Debug' for 'CString'.
- Make 'CondVar::wait()' an uninterruptible wait.
'macros' crate:
- Update 'paste!' to accept string literals.
- Improve '#[vtable]' documentation.
Documentation:
- Add testing section (KUnit and 'rusttest' target).
- Remove 'CC=clang' mentions.
- Clarify that 'rustup override' applies to build directory.
-----BEGIN PGP SIGNATURE-----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=w+n8
-----END PGP SIGNATURE-----
Merge tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was
fairly small (and we did not have two upgrades)
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting
- Support 'srctree'-relative links in Rust code documentation
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen')
- Suppress searching builtin sysroot to avoid confusion with
installed sysroots, needed for the to-be-merged arm64 support which
uses a builtin target
- Ignore '__preserve_most' functions for 'bindgen'
- Reduce header inclusion bloat in exports
'kernel' crate:
- Implement 'Debug' for 'CString'
- Make 'CondVar::wait()' an uninterruptible wait
'macros' crate:
- Update 'paste!' to accept string literals
- Improve '#[vtable]' documentation
Documentation:
- Add testing section (KUnit and 'rusttest' target)
- Remove 'CC=clang' mentions
- Clarify that 'rustup override' applies to build directory"
* tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux:
docs: rust: Clarify that 'rustup override' applies to build directory
docs: rust: Add rusttest info
docs: rust: remove `CC=clang` mentions
rust: support `srctree`-relative links
rust: sync: Makes `CondVar::wait()` an uninterruptible wait
rust: upgrade to Rust 1.74.1
rust: Suppress searching builtin sysroot
rust: macros: improve `#[vtable]` documentation
rust: macros: update 'paste!' macro to accept string literals
rust: bindings: rename const binding using sed
rust: Ignore preserve-most functions
rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c
rust: kernel: str: Implement Debug for CString
|
||
|
Miguel Ojeda
|
bc2e7d5c29 |
rust: support srctree-relative links
Some of our links use relative paths in order to point to files in the
source tree, e.g.:
//! C header: [`include/linux/printk.h`](../../../../include/linux/printk.h)
/// [`struct mutex`]: ../../../../include/linux/mutex.h
These are problematic because they are hard to maintain and do not support
`O=` builds.
Instead, provide support for `srctree`-relative links, e.g.:
//! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h)
/// [`struct mutex`]: srctree/include/linux/mutex.h
The links are fixed after `rustdoc` generation to be based on the absolute
path to the source tree.
Essentially, this is the automatic version of Tomonori's fix [1],
suggested by Gary [2].
Suggested-by: Gary Guo <gary@garyguo.net>
Reported-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Closes: https://lore.kernel.org/r/20231026.204058.2167744626131849993.fujita.tomonori@gmail.com [1]
Fixes:
|
||
Boqun Feng
|
0a7f5ba73e |
rust: sync: Makes CondVar::wait() an uninterruptible wait
Currently, `CondVar::wait()` is an interruptible wait, and this is different than `wait_event()` in include/linux/wait.h (which is an uninterruptible wait). To avoid confusion between different APIs on the interruptible/uninterruptible, make `CondVar::wait()` an uninterruptible wait same as `wait_event()`, also rename the old `wait()` to `CondVar::wait_interruptible()`. Spotted-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Tiago Lam <tiagolam@gmail.com> Link: https://lore.kernel.org/r/20231214200421.690629-1-boqun.feng@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
80fe9e5151 |
rust: upgrade to Rust 1.74.1
This is the next upgrade to the Rust toolchain, from 1.73.0 to 1.74.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit
|
||
|
FUJITA Tomonori
|
cbe0e41508 |
net: phy: add Rust Asix PHY driver
This is the Rust implementation of drivers/net/phy/ax88796b.c. The features are equivalent. You can choose C or Rust version kernel configuration. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
2fe11d5ab3 |
rust: net::phy add module_phy_driver macro
This macro creates an array of kernel's `struct phy_driver` and registers it. This also corresponds to the kernel's `MODULE_DEVICE_TABLE` macro, which embeds the information for module loading into the module binary file. A PHY driver should use this macro. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
f20fd5449a |
rust: core abstractions for network PHY drivers
This patch adds abstractions to implement network PHY drivers; the driver registration and bindings for some of callback functions in struct phy_driver and many genphy_ functions. This feature is enabled with CONFIG_RUST_PHYLIB_ABSTRACTIONS=y. This patch enables unstable const_maybe_uninit_zeroed feature for kernel crate to enable unsafe code to handle a constant value with uninitialized data. With the feature, the abstractions can initialize a phy_driver structure with zero easily; instead of initializing all the members by hand. It's supposed to be stable in the not so distant future. Link: https://github.com/rust-lang/rust/pull/116218 Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Matthew Maurer
|
71479eee9d |
rust: Suppress searching builtin sysroot
By default, if Rust is passed `--target=foo` rather than a target.json file, it will infer a default sysroot if that component is installed. As the proposed aarch64 support [1] uses `aarch64-unknown-none` rather than a target.json file, this is needed [2] to prevent rustc from being confused between the custom kernel sysroot and the pre-installed one. [ Miguel: Applied Boqun's extra case (for `rusttest`) and reworded to add links to the arm64 patch series discussion. In addition, fixed the `rustdoc` target too (which requires a conditional since `cmd_rustdoc` is also used for host crates like `macros`). ] Signed-off-by: Matthew Maurer <mmaurer@google.com> Tested-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/rust-for-linux/20231020155056.3495121-1-Jamie.Cunliffe@arm.com/ [1] Link: https://lore.kernel.org/rust-for-linux/CAGSQo01pOixiPXkW867h4vPUaAjtKtHGKhkV-rpifJvKxAf4Ww@mail.gmail.com/ [2] Link: https://lore.kernel.org/r/20231031201752.1189213-1-mmaurer@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Benno Lossin
|
88c2e1169f |
rust: macros: improve #[vtable] documentation
Traits marked with `#[vtable]` need to provide default implementations for optional functions. The C side represents these with `NULL` in the vtable, so the default functions are never actually called. We do not want to replicate the default behavior from C in Rust, because that is not maintainable. Therefore we should use `build_error` in those default implementations. The error message for that is provided at `kernel::error::VTABLE_DEFAULT_ERROR`. Signed-off-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Finn Behrens <me@kloenk.dev> Link: https://lore.kernel.org/r/20231026201855.1497680-1-benno.lossin@proton.me [ Wrapped paragraph to 80 as requested and capitalized sentence. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Trevor Gross
|
2dc318ea96 |
rust: macros: update 'paste!' macro to accept string literals
Enable combining identifiers with literals in the 'paste!' macro. This
allows combining user-specified strings with affixes to create
namespaced identifiers.
This sample code:
macro_rules! m {
($name:lit) => {
paste!(struct [<_some_ $name _struct_>] {})
}
}
m!("foo_bar");
Would previously cause a compilation error. It will now generate:
struct _some_foo_bar_struct_ {}
Signed-off-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20231118013959.37384-1-tmgross@umich.edu
[ Added `:` before example block. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
Gary Guo
|
743766565d |
rust: bindings: rename const binding using sed
Currently, for `const`s that bindgen doesn't recognise, we define a
helper constant with
const <TYPE> BINDINGS_<NAME> = <NAME>;
in `bindings_helper.h` and then we put
pub const <NAME>: <TYPE> = BINDINGS_<NAME>;
in `bindings/lib.rs`. This is fine since we currently only have 3
constants that are defined this way, but is going to be more annoying
when more constants are added since every new constant needs to be
defined in two places.
This patch changes the way we define constant helpers to
const <TYPE> RUST_CONST_HELPER_<NAME> = <NAME>;
and then use `sed` to postprocess Rust code generated by bindgen to
remove the distinct prefix, so users of the `bindings` crate can refer
to the name directly.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231104145700.2495176-1-gary@garyguo.net
[ Reworded for typos. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Matthew Maurer
|
bad098d768 |
rust: Ignore preserve-most functions
Neither bindgen nor Rust know about the preserve-most calling convention, and Clang describes it as unstable. Since we aren't using functions with this calling convention from Rust, blocklist them. These functions are only added to the build when list hardening is enabled, which is likely why others didn't notice this yet. Signed-off-by: Matthew Maurer <mmaurer@google.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20231031201945.1412345-1-mmaurer@google.com [ Used Markdown for consistency with the other comments in the file. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Masahiro Yamada
|
dc92ac9f63 |
rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c
<linux/export.h> is the right header to include for using EXPORT_SYMBOL_GPL. <linux/module.h> includes much more bloat. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20231124142617.713096-1-masahiroy@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Asahi Lina
|
c3f41b0030 |
rust: kernel: str: Implement Debug for CString
Make it possible to use a `CString` with the `pr_*` macros directly. That
is, instead of:
pr_debug!("trying to open {:?}\n", &*filename);
we can now write:
pr_debug!("trying to open {:?}\n", filename);
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230714-cstring-debug-v1-1-4e7c3018dd4f@asahilina.net
[ Reworded to use Alice's commit message as discussed. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Linus Torvalds
|
5c5e048b24 |
Kbuild updates for v6.7
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmVFIZgVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGeKwP+wd2kCrxAgS4zPffOcO3cVHfZwJe
AXOrTp/v73gzxb9eHXH6TmEDf1Rv7EwW3fmmGJosopJGD6itBqzJa4bNDrbq40rY
XStmg0NRmTrIG20CHGgaGWxb8/7WMrYfu0rhFdUXJjmbny6XwJ3US9FvDPC0mZz7
w9VCq5CZOqMsJcQyGkAR7uCHDRzNWiZ/Vnfbz3aa6abFzp7dsjhOgDy5SQ6qZgQz
AwHHKNEN+G3HWmGDZqcbV9aDaCk4btnz64h843RAxjy2HNJF360Ohm2KOcdJr5lo
DSSStkogBkZNSRQPtqtfknDjzITjeF4JAnUw5ivOtt8ERaO3JRUcr5gHjfw5iV/n
o4pC1SXmFzdfoN4dogoYF9rz3j955mSFlT/DSbSbuQS/ELzQs0nsqERxhV4zNCsX
KvYPUqKzZLW3i8pHNuhh7z7t4Nbz1zXqUa19FvaLNtFTCtS8/IA868a59S0uqT9I
EAIqrNy9qAsk8UuQUxWVx0qf9f5wKGYxW62iMIF9F2lsFRWA8H588CFPUuSU9Bhk
KAsvzq249MUGJd0RAjF92EWJgNz/nYzZfFTEL5HKAVauYY5UCyR3AVjrak761I8z
ctVskA7eVkaW4eARfcp15Fna15FHVzxBJ3B26oKYIJBQfJLjzZcV8XeMtEcQjEGU
jzl+oRqB/Q3oD7Nx
=PeX7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
|
||
|
Linus Torvalds
|
639409a4ac |
workqueue: Add rust bindings for v6.7
to allow rust code to schedule work items on workqueues. While the current
bindings don't cover all of the workqueue API, it provides enough for basic
usage and can be expanded as needed.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZUBNNw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQWtAP4vD31xd8YOu8UnUyFP3rJaA3F5VwoVm6DK9Lo7
otBe8wD9ExoJHTiZiJwucvqbx7/z3EbbJYro56pIea9/O59t+AU=
=cTn3
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue rust bindings from Tejun Heo:
"Add rust bindings to allow rust code to schedule work items on
workqueues.
While the current bindings don't cover all of the workqueue API, it
provides enough for basic usage and can be expanded as needed"
* tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: add examples
rust: workqueue: add `try_spawn` helper method
rust: workqueue: implement `WorkItemPointer` for pointer types
rust: workqueue: add helper for defining work_struct fields
rust: workqueue: define built-in queues
rust: workqueue: add low-level workqueue bindings
rust: sync: add `Arc::{from_raw, into_raw}`
|
||
|
Linus Torvalds
|
455cdcb45f |
Rust changes for v6.7
A small one compared to the previous one in terms of features. In terms
of lines, as usual, the 'alloc' version upgrade accounts for most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0.
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler
or possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C.
Documentation:
- Add "The Rust experiment" section to the Rust index page.
MAINTAINERS
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmU79aIACgkQGXyLc2ht
IW03Rw//ZcbRDxVEbD9UE+aM6wtKQ1eY8QIB7gNivctv1R8spKlnsLpF/VdBQV4v
yWmMPG/Vnp7Xbkcg2kZrbo2J82NgD6ACJWxWHVb8K2N/hoIVwrQXiQUmtg8bAa5B
aDso+8WcWZOF6uzu5ww7kv8AbAOO3ReCxnIVPexeWQtZVAGeBd4BiVecoTL0mCbA
7MMNyyKxjnRSo72Sj4iFoVPjb/IkOHYRaPQA/QOvG3bwin5nTvxM+94v+UZ4D7fp
THWuZjJiC19L/C2/GGweK6mnpV2lExdZl4RC3JInu8s3R6jwGuRxUNE4vCnO9DlY
QBkeUV3qwMCG/LnAb+iyClDM5aEU2wWBFl1NwNy0yEQM/gBqk6+4HQxxB177Wte3
V65f4Sz19baci1SNCk+rFe/1EK8/UoD2jo42DXnuIUnGq5VJtVRNxbn/2tR0kNZn
9DGwR1U8shMytNen5xFLi03q+p1Zuez/YKzmTmahv8zn2JysUgj3ctFK2M3mCiFu
+HWvPFBbUbOH+/g3txBXtnvY757Nei5siSKONVZTOez6VYR//jlvLNNBbUp3vPFE
w2TuR6HcFVR8z/kjcTxIgS+xzbsT8FkugJwRdLeQU4Ky03o2Z6uosM3nky9TzWjb
oVR7rFgb9KygvP67+uVQS5OETQVO0EwutlEsQzzs7cbnoSt0ckk=
=rKLl
-----END PGP SIGNATURE-----
Merge tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"A small one compared to the previous one in terms of features. In
terms of lines, as usual, the 'alloc' version upgrade accounts for
most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler or
possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C
Documentation:
- Add "The Rust experiment" section to the Rust index page
MAINTAINERS:
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year"
* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
docs: rust: add "The Rust experiment" section
x86: Enable IBT in Rust if enabled in C
rust: Use grep -Ev rather than relying on GNU grep
rust: Use awk instead of recent xargs
rust: upgrade to Rust 1.73.0
rust: print: use explicit link in documentation
rust: task: remove redundant explicit link
rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
MAINTAINERS: add Maintainer Entry Profile field for Rust
MAINTAINERS: update Rust webpage
rust: upgrade to Rust 1.72.1
rust: arc: add explicit `drop()` around `Box::from_raw()`
|
||
|
Miguel Ojeda
|
cfd96726e6 |
rust: docs: fix logo replacement
The static files placement by `rustdoc` changed in Rust 1.67.0 [1],
but the custom code we have to replace the logo in the generated
HTML files did not get updated.
Thus update it to have the Linux logo again in the output.
Hopefully `rustdoc` will eventually support a custom logo from
a local file [2], so that we do not need to maintain this hack
on our side.
Link: https://github.com/rust-lang/rust/pull/101702 [1]
Link: https://github.com/rust-lang/rfcs/pull/3226 [2]
Fixes:
|