Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for new
hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi,
and i2c drivers for that type of device (all acked by the respective
subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems, EXCEPT for some merge conflicts that you will run
into in your tree. 2 of them are in device-tree files, which will be
trivial to resolve (accept both sides), and the last in the
drivers/gpio/gpio-ljca.c file, in the remove callback, resolution should
be pretty trivial (take the version in this branch), see here:
https://lore.kernel.org/all/20231016134159.11d8f849@canb.auug.org.au/
for details, or I can provide a resolved merge point if needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUStew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxgQCggUyfGo+JVV8XZVu5A9KwT6nr7mUAmwUgFxhZ
khK77t0KqF4hjXryeaHa
=iPd+
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-19-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect ac->name to be NUL-terminated based on its usage with format
strings:
surface_charger.c:
190: ac->psy_desc.name = ac->name;
...
power_supply_core.c:
174: dev_dbg(&psy->dev, "%s: Found supply : %s\n",
175: psy->desc->name, epsy->desc->name);
Moreover, NUL-padding is not required as ac is already zero-allocated
before being passed to spwr_ac_init():
surface_charger.c:
240: ac = devm_kzalloc(&sdev->dev, sizeof(*ac), GFP_KERNEL);
241: if (!ac)
242: return -ENOMEM;
243:
244: spwr_ac_init(ac, sdev, p->registry, p->name);
... this means any future NUL-byte assignments (like the ones that
strncpy() does) are redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt for the more idiomatic strscpy() usage of:
(dest, src, sizeof(dest))
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-surface_charger-c-v1-1-93ddbf668e10@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bat->name to be NUL-terminated based on its usage with
strcmp():
power_supply_core.c:
445: return strcmp(psy->desc->name, name) == 0;
... and also by the manual `... - 1` for the length argument of the
original strncpy() invocation.
Furthermore, no NUL-padding is needed as bat is zero-allocated before
calling spwr_battery_init():
826: bat = devm_kzalloc(&sdev->dev, sizeof(*bat), GFP_KERNEL);
827: if (!bat)
828: return -ENOMEM;
829:
830: spwr_battery_init(bat, sdev, p->registry, p->name);
... this means any further NUL-byte assignments (like the ones that
strncpy() does) are redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of:
(dest, src, sizeof(dest)).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-surface_battery-c-v2-1-29ed16b2caf1@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect cm->psy_name_buf to be NUL-terminated based on its usage with
format strings:
1522: cm->charger_psy_desc.name = cm->psy_name_buf;
...
1587: dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
1587: cm->charger_psy_desc.name);
Moreover, NUL-padding is not required as `cm` is already zero-allocated
and thus any future NUL-byte assignments (like what strncpy() will do)
are redundant:
1437: cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt for the more idiomatic strscpy() usage of:
strscpy(dest, src, sizeof(dest)).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-charger-manager-c-v1-1-698f73bcad2a@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bq2515x->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bq2515x->model_name in
bq2515x_mains_get_property():
| val->strval = bq2515x->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
| ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
| ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
| return psy->desc->get_property(psy, psp, val);
with bq2515x_mains_get_property():
| static const struct power_supply_desc bq2515x_mains_desc = {
...
| .get_property = bq2515x_mains_get_property,
Moreover, no NUL-padding is required as bq2515x is zero-allocated in
bq2515x_charger.c:
| bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) as this more closely ties the destination buffer and the
length.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq2515x_charger-c-v1-1-46664c6edf78@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bdi->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bdi->model_name in
bq24190_charger_get_property():
1186 | val->strval = bdi->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
311 | ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
285 | ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
1210 | return psy->desc->get_property(psy, psp, val);
with bq24190_charger_get_property():
1320 | static const struct power_supply_desc bq24190_charger_desc = {
...
1325 | .get_property = bq24190_charger_get_property,
Moreover, no NUL-padding is required as bdi is zero-allocated in
bq24190_charger.c:
1798 | bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Only DT based probing is used for the Motorola CPCAP charger driver, so
drop the !CONFIG_OF parts and redundant of_match_device() call.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231009172923.2457844-20-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Depend on the explicit SoC defines rather than generic
architectures like most of the rest of the HW drivers do.
This makes the drivers only available for the HW and for
compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009135833.17880-3-pbrobinson@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a priority property equal to gpio-restart to allow increasing the
priority of the gpio-poweroff handler.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20231006130428.11259-5-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the new sys-off handler API for gpio-poweroff. This allows us to
have more than one poweroff handler and prioritise them.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20231006130428.11259-3-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use a struct to store the module variables. This is required to later
move to notifier_blocks where we can have several instances.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20231006130428.11259-2-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently the struct "rt5033_charger_data" is initialized rather complicated.
The cause lies inside of the struct "rt5033_charger", where struct
"rt5033_charger_data" is implemented as a pointer *chg.
Therefore, inside of struct "rt5033_charger" change the struct
"rt5033_charger_data" to non-pointer "chg". It is then initialized right
away and can be accessed more easily.
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/0aff8c2a18cf4b88ec3333f6679a8419dd76ca29.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Implement cable detection by extcon and handle the driver according to the
connector type.
There are basically three types of action: "set_charging", "set_otg" and
"set_disconnect".
A forth helper function to "unset_otg" was added because this is used in both
"set_charging" and "set_disconnect". In the first case it covers the rather
rare event that someone changes from OTG to charging without disconnect. In
the second case, when disconnecting, the values are set back to the ones from
initialization to return into a defined state.
Additionally, there is "set_mivr". When connecting to e.g. a laptop/PC, the
minimum input voltage regulation (MIVR) shall prevent a voltage drop if the
cable or the supply is weak. The MIVR value is set to 4600MV, same as in the
Android driver [1]. When disconnecting, MIVR is set back to DISABLED.
In the function rt5033_get_charger_state(): When in OTG mode, the chip
reports status "charging". Change this to "discharging" because there is
no charging going on in OTG mode [2].
Yang Yingliang detected missing mutex_unlock() in some error path and
suggested a fix [3]. The suggestion was squashed into this patch.
[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L499
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L686-L687
[3] https://lore.kernel.org/linux-pm/20230822030207.644738-1-yangyingliang@huawei.com
Tested-by: Raymond Hackley <raymondhackley@protonmail.com>
Co-developed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/cc4e37e510abbb0cdfa7faa8408da48c2cb448a4.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Enabling the tps65217-charger driver/module causes an interrupt conflict
with the vbus driver resulting in a probe failure.
The conflict is resolved by changing both driver's threaded interrupt
request function from IRQF_ONESHOT to IRQF_SHARED.
Signed-off-by: Grant B Adams <nemith592@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230823085430.6610-2-nemith592@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a missing "ret = " assignment so this checks the same "ret"
value twice.
Fixes: c75f4bf680 ("power: supply: Introduce MM8013 fuel gauge driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/c46b4408-bf1d-408d-9e6b-16b0ad272532@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add the missing endianness conversion when sending the enable request so
that the driver will work also on a hypothetical big-endian machine.
This issue was reported by sparse.
Fixes: 29e8142b56 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Cc: stable@vger.kernel.org # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230929101649.20206-1-johan+linaro@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The value of ret is zero when passed to dev_error_probe(), we are passing
zero to dev_err_probe() is a success which is incorrect.
Fix this by getting the error code using PTR_ERR().
Fixes: c75f4bf680 ("power: supply: Introduce MM8013 fuel gauge driver")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309190838.eu8WS6sz-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230923114807.2829188-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct axp20x_usb_power.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175358.work.774-kees@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct axp20x_ac_power.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175355.work.006-kees@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time.
Fixes: 54c03bfd09 ("power: supply: Fix refcount leak in rk817_charger_probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power_supply_uevent() which is called to emit a udev event on device
deletion attempts to use the power_supply_battery_info structure,
which is device-managed and has been freed before this point.
Fix this by not generating all battery/charger properties when the
device is about to be removed. This also avoids generating errors
when trying to access the hardware in hot-unplug scenarios.
==================================================================
BUG: KASAN: slab-use-after-free in power_supply_battery_info_has_prop (power_supply_core.c:872)
Read of size 4 at addr 0000000062e59028 by task python3/27
Call Trace:
power_supply_battery_info_has_prop (power_supply_core.c:872)
power_supply_uevent (power_supply_sysfs.c:504)
dev_uevent (drivers/base/core.c:2590)
kobject_uevent_env (lib/kobject_uevent.c:558)
kobject_uevent (lib/kobject_uevent.c:643)
device_del (drivers/base/core.c:3266 drivers/base/core.c:3831)
device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854)
power_supply_unregister (power_supply_core.c:1608)
devm_power_supply_release (power_supply_core.c:1515)
release_nodes (drivers/base/devres.c:506)
devres_release_group (drivers/base/devres.c:669)
i2c_device_remove (drivers/i2c/i2c-core-base.c:629)
device_remove (drivers/base/dd.c:570)
device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295)
device_driver_detach (drivers/base/dd.c:1332)
unbind_store (drivers/base/bus.c:247)
...
Allocated by task 27:
devm_kmalloc (drivers/base/devres.c:119 drivers/base/devres.c:829)
power_supply_get_battery_info (include/linux/device.h:316 power_supply_core.c:626)
__power_supply_register (power_supply_core.c:1408)
devm_power_supply_register (power_supply_core.c:1544)
bq256xx_probe (bq256xx_charger.c:1539 bq256xx_charger.c:1727) bq256xx_charger
i2c_device_probe (drivers/i2c/i2c-core-base.c:584)
really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658)
__driver_probe_device (drivers/base/dd.c:800)
device_driver_attach (drivers/base/dd.c:1128)
bind_store (drivers/base/bus.c:273)
...
Freed by task 27:
kfree (mm/slab_common.c:1073)
release_nodes (drivers/base/devres.c:503)
devres_release_all (drivers/base/devres.c:536)
device_del (drivers/base/core.c:3829)
device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854)
power_supply_unregister (power_supply_core.c:1608)
devm_power_supply_release (power_supply_core.c:1515)
release_nodes (drivers/base/devres.c:506)
devres_release_group (drivers/base/devres.c:669)
i2c_device_remove (drivers/i2c/i2c-core-base.c:629)
device_remove (drivers/base/dd.c:570)
device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295)
device_driver_detach (drivers/base/dd.c:1332)
unbind_store (drivers/base/bus.c:247)
...
==================================================================
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Fixes: 27a2195efa ("power: supply: core: auto-exposure of simple-battery data")
Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When CONFIG_EXTCON=m and CONFIG_CHARGER_PM8916_LBC=y, there are
build errors. Fix them by having CHARGER_PM8916_LBC depend on the
setting of EXTCON.
aarch64-linux-ld: drivers/power/supply/pm8916_lbc.o: in function `pm8916_lbc_charger_state_changed_irq':
pm8916_lbc.c:(.text+0xe8): undefined reference to `extcon_set_state_sync'
aarch64-linux-ld: drivers/power/supply/pm8916_lbc.o: in function `pm8916_lbc_charger_probe':
pm8916_lbc.c:(.text+0x638): undefined reference to `devm_extcon_dev_allocate'
aarch64-linux-ld: pm8916_lbc.c:(.text+0x650): undefined reference to `devm_extcon_dev_register'
aarch64-linux-ld: pm8916_lbc.c:(.text+0x688): undefined reference to `extcon_set_state_sync'
Fixes: f8d7a3d211 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nikita Travkin <nikita@trvn.ru>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20230918205825.25864-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-33-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-32-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-31-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-27-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
