Commit Graph

412 Commits

Author SHA1 Message Date
Linus Torvalds
031fc8f313 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap3: Decrease cpufreq transition latency
  omap3: update Pandora defconfig
  omap3: 3430sdp: Enable Linux Regulator framework
  omap3: beagle: Fix USB host port power control
  omap3: pandora: Fix keypad keymap
  omap1: Amstrad Delta defconfig fixes
  omap: Fix omapfb/lcdc on OMAP1510 broken when PM set
  omap: Use resource_size
  omap: Fix race condition in omap dma driver
2009-11-12 14:57:15 -08:00
Grazvydas Ignotas
1ea6e6652a omap3: update Pandora defconfig
This patch updates defconfig to enable options needed to properly
boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs,
TWL4030 GPIO and sound drivers.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Sergio Aguirre
b30dcf5f37 omap3: 3430sdp: Enable Linux Regulator framework
Some drivers have dependencies on this, and therefore should be
enabled.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Janusz Krzysztofik
0194324455 omap1: Amstrad Delta defconfig fixes
The patch provides the following fixes:

- keep kernel small enough to boot with standard tools,
- ensure compatibility with both new and legacy distros,
- turn on support for recently added or fixed hardware features.

Created and tested against linux-2.6.32-rc5.

Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:08 -08:00
Nicolas Pitre
3293576c6b [ARM] orion5x: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-07 20:59:20 -05:00
Nicolas Pitre
ffbfe093b6 [ARM] Kirkwood: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-07 20:36:02 -05:00
Linus Torvalds
0b3dc0e9c8 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: Fix UART4 platform data on omap4
  omap4: Allow omap_serial_early_init() for OMAP4430 board
  omap3: PM: enable UART3 module wakeups
  omap2: Fix console serial port number for n8x0
  omap2: Fix detection of n8x0
  omap1: Fix DSP public peripherals support for ams-delta
  omap1: Fix redundant UARTs pin muxing that can break other hardware support
  omap: iommu: fix wrong condition check for SUPERSECTION
  omap: SDMA: Fix omap_stop_dma() API for channel linking
  omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-29 08:16:42 -07:00
Tony Lindgren
60dbd8c95f omap2: Fix console serial port number for n8x0
With the recent changes omap serial ports match the physical
numbering like they should. Fix the kernel CMDLINE accordingly
so console works.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22 15:41:16 -07:00
Linus Walleij
faff8032ec ARM: 5765/1: Updated U300 defconfig
This updates the U300 to use all the drivers merged in during the
2.6.32 merge window.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21 13:08:42 +01:00
Sanjeev Premi
dc6e56b199 omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
The symbol CONFIG_ISP1301_OMAP was defined twice in the
defconfig. This was causing the warning:
arch/arm/configs/omap3_beagle_defconfig:972:warning:
 override: reassigning to symbol ISP1301_OMAP

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-14 09:56:33 -07:00
Russell King
534d0c92cf Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop
Conflicts:
	MAINTAINERS
2009-10-02 22:31:04 +01:00
Jaswinder Singh Rajput
d5fc79cca2 ARM: Remove unused CONFIG SA1100_H3XXX
Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Dmitry Artamonow <mad_soft@inbox.ru>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28 18:06:20 +01:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Linus Torvalds
a7c367b95a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...
2009-09-23 10:07:49 -07:00
Imre Deak
c8f1c1b9e1 N770: enable LCD MIPI-DCS in Kconfig
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Stanley.Miao
8fea8844a7 omapfb: add support for the ZOOM MDK LCD
Add glue to control the OMAP_LDP LCD as a frame buffer device using the
existing dispc.c driver under omapfb.

Patch updated for mainline kernel.  Note that the drivers/video/omap
should be updated to pass omap_lcd_config in platform_data.  The patch
should also be updated to compile if twl4030 is not selected, and
eventually to use the regulator framework.

Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Koen Kooi
27969ccc28 omapfb: add support for the OMAP3 Beagle DVI output
The default resolution is 1024x768@24bit

This version addresses the comments from Felipe Balbi adn Arun Edarath

Fixed-by: Felipe Contreras <felipe.contreras@gmail.com>
Fixed-by: Steve Sakoman <steve@sakoman.com>
Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Koen Kooi <koen@openembedded.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Kevin Hilman
fb49b78452 omapfb: add support for the 3430SDP LCD
The 3430SDP uses the same panel as the 2430SDP.  The main difference are
in the GPIO lines used for panel enable and backlight, and the VAUX
register/commands sent to the TWL4030 power subsystem.

Also, some misc. whitespace cleanups.

Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@mvsita.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:49 -07:00
Russell King
28f9f19db9 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-09-21 16:02:30 +01:00
Alessandro Rubini
63234717d1 mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-20 05:59:42 -07:00
Linus Torvalds
6f128fa344 Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits)
  DaVinci: DM646x - platform changes for vpif capture and display drivers
  davinci: DM355 - platform changes for vpfe capture
  davinci: DM644x platform changes for vpfe capture
  davinci: audio: move tlv320aic33 i2c setup into board files
  DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs
  DaVinci: DM365: Adding entries for DM365 IRQ's
  DaVinci: DM355: Adding PINMUX entries for DM355 Display
  davinci: Handle pinmux conflict between mmc/sd and nor flash
  davinci: Add NOR flash support for da850/omap-l138
  davinci: Add NAND flash support for DA850/OMAP-L138
  davinci: Add MMC/SD support for da850/omap-l138
  davinci: Add platform support for da850/omap-l138 GLCD
  davinci: Macro to convert GPIO signal to GPIO pin number
  davinci: Audio support for DA850/OMAP-L138 EVM
  davinci: Audio support for DA830 EVM
  davinci: Correct the number of GPIO pins for da850/omap-l138
  davinci: Configure MDIO pins for EMAC
  DaVinci: DM365: Add Support for new Revision of silicon
  DaVinci: DM365: Fix Compilation issue due to PINMUX entry
  DaVinci: EDMA: Updating default queue handling
  ...
2009-09-18 09:20:37 -07:00
Linus Torvalds
73c583e4e2 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...
2009-09-18 09:19:26 -07:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Russell King
7010381449 Merge branch 'nomadik' into devel-stable 2009-09-12 11:50:52 +01:00
Matej Kenda
23440f85ff [ARM] pxa: add defconfig for IskraTel XCEP board
Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:39 +08:00
Haojian Zhuang
36714c935a [ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig
Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig.
Since they're similar platform and servicing for same SoC family.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:28 +08:00
Kristoffer Ericson
56ddf7e6d4 ARM: 5689/1: Update default config of HP Jornada 700-series machines
This patch updates the default config for HP Jornada 700-series handhelds.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-06 20:54:41 +01:00
Paul Walmsley
36d568ec05 OMAP3: update OMAP3 Beagle defconfig
Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support.
Beagle can again use MMC rootfs after this patch.  Tested on BeagleBoard
rev C2.

Patch updated to enable PM and OTG options as suggested by
Eric Witcher <ewitcher@mindspring.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:17 -07:00
Vikram Pandita
1eab46a2ea OMAP3: Zoom2: Update board defconfig
Update defconfig for Zoom2 to include
TWL4030 core
TWL4030 drivers (bci, gpio, keypad, usb, mmc)

Also sync the defconfig after issuing a menuconfig

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:14 -07:00
Timo Kokkonen
ac2a048c3c OMAP3: rx51_defconfig: add twl4030 to rx51 default configuration
twl4030 watchdog will be compiled as a module by default.

Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:10 -07:00
Sergio Aguirre
8870d946e1 OMAP3: 3430SDP: Fix defconfig
This patch makes the SDP boot again with the defconfig.

Changes done:

 - Removes other selected boards.
 - Sets the Low Level debug output for UART1.
 - Disables some paripherals from other boards.

Tested on a SDP3430-VE5.1.0 (OMAP3430 ES3.1)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 11:24:09 -07:00
Kalle Valo
af933f4729 OMAP2: n8x0: add n8x0_defconfig
Add defconfig file for OMAP2 N800 and N810 devices.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 10:53:38 -07:00
Kevin Hilman
889c1e0dab davinci: Kconfig: add dm646x ASoC support 2009-08-26 11:55:48 +03:00
Kevin Hilman
10a1af384e davinci: Kconfig: update default defconfig
Updated default defconfig after da850 merge and 2.6.31-rc3 update.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:46 +03:00
Sudhakar Rajashekhara
0fbc559215 davinci: Add support for DA850/OMAP-L138 EVM board
Add support for the DA850/OMAP-L138 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) card which contains
various devices. This UI card can be connected to the base
board. Support for all the devices on the UI card and ones on
the EVM will be added in subsequent patches.

The EVM schematics are not available publicly yet; but should
be available soon.

A new defconfig for this board has been added mainly because
the DA830/OMAP-L137 defconfig forces writethrough cache mode
which is not required on DA850/OMAP-L138.

This patch has been boot tested on DA850/OMAP-L138 EVM
using ramdisk as filesystem.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:45 +03:00
Kevin Hilman
88659988d5 davinci: Kconfig: update default config for 2.6.31-rc
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:57:00 +03:00
Mark A. Greer
8593790d60 davinci: da8xx: Add support for DA830/OMAP-L137 EVM board
Add support for the DA830/OMAP-L137 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) and Audio cards
that can be connected which contain various devices.
Support for those devices and ones on the EVM will be
added in subsequent patches.

Additional generalizations for future SoCs in da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:59 +03:00
Sandeep Paulraj
a46e9e403c davinci: Adding DM365 entries to Makefile/Kconfig/defconfig
This patch does the following
1) Adds entries to davinci_all_defconfig for DM365
2) Adds entries to the Makefile for DM365
3) Adds entries for DM365 in the Kconfig

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:58 +03:00
John Holland
c55bf102b6 [ARM] Kirkwood: enable eSATA on QNAP TS-219P
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:56:00 -04:00
Dan Williams
9e2a7e6f5f iop33x: update defconfig (default atu to on)
By default the iop3xx configurations are set to boot the platforms over
an nfs root configuration.  Since commit c34002c1 "iop: unconditionally
initialize the ATU on platforms known to be 'hosts'" this configuration
also requires iop3xx_init_atu=y to be specified on the kernel command
line.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-18 13:47:30 -07:00
Byungho Min
e119766f4e ARM: S5PC100: Board and configuration file
SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-16 23:40:39 +01:00
Leo Chen
7f33527f54 ARM: 5670/1: bcmring: add default configuration for bcmring arch
add default configuration for bcmring arch

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 16:01:51 +01:00
Russell King
7063c88c72 Merge branch 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-08-10 14:23:29 +01:00
Roger Quadros
4177662ec9 OMAP3: RX51: Updated rx51_defconfig
Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots.

Note that the regulator code should be moved from mmc-twl4030.c
to omap_hsmmc.c so it can be a module.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-10 14:49:52 +03:00
Gupta, Ajay Kumar
e8e2ff462d USB: musb: fix the nop registration for OMAP3EVM
OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.

Cleanups being done:
	- Remove unwanted code in usb-musb.c file
	- Register NOP in OMAP3EVM board file using
	  usb_nop_xceiv_register().
	- Select NOP_USB_XCEIV for OMAP3EVM boards.
	- Don't enable TWL4030_USB in omap3_evm_defconfig

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 16:05:13 -07:00
Eric Bénard
10233a9398 ARM: 5630/1: Add support for Eukrea's CPUAT91
CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash,
up to 128MB SDRAM and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <ebenard@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 17:48:41 +01:00
Eric Bénard
41a353d126 ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20
CPU9260 and CPU9G20 share the same PCB populated with either
Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash,
up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 17:48:40 +01:00
Sascha Hauer
42469ff014 mx3 defconfig update
- enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards
- enable MXC nand driver
- enable UBI support
- disable cs89x0 support which broke all boards which do not have this chip

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28 14:24:28 +02:00