- Tighten ELF relocation checks on the RISC-V EFI stub
- Give up if the new EFI memory attributes protocol fails spuriously on
x86
- Take care not to place the kernel in the lowest 16 MB of DRAM on x86
- Omit special purpose EFI memory from memblock
- Some fixes for the CXL CPER reporting code
- Make the PE/COFF layout of mixed-mode capable images comply with a
strict interpretation of the spec
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZcDtKAAKCRAwbglWLn0t
XMDfAP9ttq8Ir4+hp8A0DGE79x6eSgBIkl5ztGmMQGybzEkzdAEAgxfDUieQW4TT
GmbyGGUouvSYxfZf4gVTQn8b/bd57AI=
=Af8A
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The only notable change here is the patch that changes the way we deal
with spurious errors from the EFI memory attribute protocol. This will
be backported to v6.6, and is intended to ensure that we will not
paint ourselves into a corner when we tighten this further in order to
comply with MS requirements on signed EFI code.
Note that this protocol does not currently exist in x86 production
systems in the field, only in Microsoft's fork of OVMF, but it will be
mandatory for Windows logo certification for x86 PCs in the future.
- Tighten ELF relocation checks on the RISC-V EFI stub
- Give up if the new EFI memory attributes protocol fails spuriously
on x86
- Take care not to place the kernel in the lowest 16 MB of DRAM on
x86
- Omit special purpose EFI memory from memblock
- Some fixes for the CXL CPER reporting code
- Make the PE/COFF layout of mixed-mode capable images comply with a
strict interpretation of the spec"
* tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
cxl/trace: Remove unnecessary memcpy's
cxl/cper: Fix errant CPER prints for CXL events
efi: Don't add memblocks for soft-reserved memory
efi: runtime: Fix potential overflow of soft-reserved region size
efi/libstub: Add one kernel-doc comment
x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR
x86/efistub: Give up if memory attribute protocol returns an error
riscv/efistub: Tighten ELF relocation check
riscv/efistub: Ensure GP-relative addressing is not used
CPER events don't have UUIDs. Therefore UUIDs were removed from the
records passed to trace events and replaced with hard coded values.
As pointed out by Jonathan, the new defines for the UUIDs present a more
efficient way to assign UUID in trace records.[1]
Replace memcpy's with the use of static data.
[1] https://lore.kernel.org/all/20240108132325.00000e9c@Huawei.com/
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Creating a region with 16 memory devices caused a problem. The div_u64_rem
function, used for dividing an unsigned 64-bit number by a 32-bit one,
faced an issue when SZ_256M * p->interleave_ways. The result surpassed
the maximum limit of the 32-bit divisor (4G), leading to an overflow
and a remainder of 0.
note: At this point, p->interleave_ways is 16, meaning 16 * 256M = 4G
To fix this issue, I replaced the div_u64_rem function with div64_u64_rem
and adjusted the type of the remainder.
Signed-off-by: Quanquan Cao <caoqq@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 23a22cd1c9 ("cxl/region: Allocate HPA capacity to regions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL 3.1 Section 3.1.1 states:
"A Function on a CXL device must not generate INTx messages if
that Function participates in CXL.cache protocol or CXL.mem
protocols."
The generic CXL memory driver only supports devices which use the
CXL.mem protocol. The current driver attempts to allocate MSI/MSI-X
vectors in anticipation of their need for mailbox interrupts or event
processing. However, the above requirement does not require a device to
support interrupts, only that they use MSI/MSI-X. For example, a device
may disable mailbox interrupts and either be configured for firmware
first or skip event processing and function.
Dave Larsen reported that the following Intel / Agilex card does not
support interrupts on function 0.
CXL: Intel Corporation Device 0ddb (rev 01) (prog-if 10 [CXL Memory Device (CXL 2.x)])
Rather than fail device probe if interrupts are not supported; flag that
irqs are not enabled and avoid features which require interrupts.
Emit messages appropriate for the situation to aid in debugging should
device behavior be unexpected due to a failure to allocate vectors.
Note that it is possible for a device to have host based event
processing through polling. However, the driver does not support
polling and it is not anticipated to be generally required. Leave that
functionality to a future patch if such a device comes along.
Reported-by: Dave Larsen <davelarsen58@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240117-dont-fail-irq-v2-1-f33f26b0e365@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
sprintf() is deprecated for sysfs, use preferred sysfs_emit() instead.
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20240112062709.2490947-1-ruansy.fnst@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pick up the CPER to CXL driver integration work for v6.8. Some
additional cleanup of cper_estatus_print() messages is needed, but that
is to be handled incrementally.
If the firmware has configured CXL event support to be firmware first
the OS can process those events through CPER records. The CXL layer has
unique DPA to HPA knowledge and standard event trace parsing in place.
CPER records contain Bus, Device, Function information which can be used
to identify the PCI device which is sending the event.
Change the PCI driver registration to include registration of a CXL
CPER callback to process events through the trace subsystem.
Use new scoped based management to simplify the handling of the PCI
device object.
Tested-by: Smita-Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita-Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-9-1bb8a4ca2c7a@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
[djbw: use new pci_dev guard, flip init order]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL CPER and event log records share everything but a UUID/GUID in
their structures.
Define a cxl_event union without the UUID/GUID to be shared between the
CPER and event log record formats. Adjust the code to use this union.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-6-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The UEFI CXL CPER structure does not include the UUID. Now that the
UUID is passed separately to the trace event there is no need to have
the UUID in those structures.
Move UUID from the event record header to the raw structures. Adjust
cxl-test to Create dummy structures for creating test records.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-5-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The UUID data is redundant in the known event trace types. The addition
of static defines allows the trace macros to create the UUID data inside
the trace thus removing unnecessary code.
Have well known trace events use static data to set the uuid field based
on the event type.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-4-1bb8a4ca2c7a@intel.com
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan points out in review that the cxl_test code could be made better
through the use of UUID's defines rather than being open coded.[1]
Create UUID defines and use them rather than open coding them.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lore.kernel.org/r/65738d09e30e2_45e0129451@dwillia2-xfh.jf.intel.com.notmuch [1]
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-3-1bb8a4ca2c7a@intel.com
[djbw: clang-format uuid definitions]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
UEFI code can process CXL events through CPER records. Those records
use almost the same format as the CXL events.
Lift the CXL event structures to a core header to be shared in later
patches.
[jic123: drop "CXL rev 3.0" mention]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-2-1bb8a4ca2c7a@intel.com
[djbw: add F: entry to maintainers for include/linux/cxl-event.h]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use scope-based resource management __free() macro to drop the open coded
put_device() in cxl_endpoint_port_probe().
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170449247973.3779673.15088722836135359275.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use scope-based resource management __free() macro to drop the open coded
put_device() in cxl_find_nvdimm_bridge().
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170449247353.3779673.5963704495491343135.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
cxl_port_perf_data_calculate() calls find_cxl_root() and does not
dereference the 'struct device' in the cxl_root->port. find_cxl_root()
calls get_device() and takes a reference on the port 'struct device'
member. Use the __free() macro to ensure the dereference happens.
Fixes: 7a4f148dd8 ("cxl: Compute the entire CXL path latency and bandwidth data")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170449246681.3779673.2288926019977963333.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 790815902e ("cxl: Add support for _DSM Function for retrieving QTG ID")
introduced 'struct cxl_root', however all usages have been worked
indirectly through cxl_port. Refactor code such as find_cxl_root()
function to use 'struct cxl_root' directly.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170449246044.3779673.13035770941393418591.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a helper function put_cxl_root() to maintain symmetry for
find_cxl_root() function instead of relying on open coding of the
put_device() in order to dereference the 'struct device' that happens via
get_device() in find_cxl_root().
Suggested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/170449245417.3779673.4566146351673989387.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
cxl_port_setup_targets() modifies the ->targets[] array of a switch
decoder. target_list_show() expects to be able to emit a coherent
snapshot of that array by "holding" ->target_lock for read. The
target_lock is held for write during initialization of the ->targets[]
array, but it is not held for write during cxl_port_setup_targets().
The ->target_lock() predates the introduction of @cxl_region_rwsem. That
semaphore protects changes to host-physical-address (HPA) decode which
is precisely what writes to a switch decoder's target list affects.
Replace ->target_lock with @cxl_region_rwsem.
Now the side-effect of snapshotting a unstable view of a decoder's
target list is likely benign so the Fixes: tag is presumptive.
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The decoder_populate_targets() helper walks all of the targets in a port
and makes sure they can be looked up in @target_map. Where @target_map
is a lookup table from target position to target id (corresponding to a
cxl_dport instance). However @target_map is only responsible for
conveying the active dport instances as indicated by interleave_ways.
When nr_targets > interleave_ways it results in
decoder_populate_targets() walking off the end of the valid entries in
@target_map. Given target_map is initialized to 0 it results in the
dport lookup failing if position 0 is not mapped to a dport with an id
of 0:
cxl_port port3: Failed to populate active decoder targets
cxl_port port3: Failed to add decoder
cxl_port port3: Failed to add decoder3.0
cxl_bus_probe: cxl_port port3: probe: -6
This bug also highlights that when the decoder's ->targets[] array is
written in cxl_port_setup_targets() it is missing a hold of the
targets_lock to synchronize against sysfs readers of the target list. A
fix for that is saved for a later patch.
Fixes: a5c2580216 ("cxl/bus: Populate the target list at decoder create")
Cc: <stable@vger.kernel.org>
Signed-off-by: Huang, Ying <ying.huang@intel.com>
[djbw: rewrite the changelog, find the Fixes: tag]
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL supports x3, x6 and x12 - not x9.
Fixes: 80d10a6cee ("cxl/region: Add interleave geometry attributes")
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/169904271254.204936.8580772404462743630.stgit@ubuntu
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL CPER events are identified by the CPER Section Type GUID. The GUID
correlates with the CXL UUID for the event record. It turns out that a
CXL CPER record is a strict subset of the CXL event record, only the
UUID header field is chopped.
In order to unify handling between native and CPER flavors of CXL
events, prepare the code for the UUID to be passed in rather than
inferred from the record itself.
Later patches update the passed in record to only refer to the common
data between the formats.
Pass the UUID explicitly to each trace event to be able to remove the
UUID from the event structures.
Originally it was desirable to remove the UUID from the well known event
because the UUID value was redundant. However, the trace API was
already in place.[1]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/all/36f2d12934d64a278f2c0313cbd01abc@huawei.com [1]
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-1-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use "%pap" to print a resource_size_t (phys_addr_t derived type)
to prevent build warnings on 32-bit arches (seen on i386 and
riscv-32).
../drivers/cxl/core/region.c: In function 'alloc_hpa':
../drivers/cxl/core/region.c:556:25: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 5 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
556 | "HPA allocation error (%ld) for size:%#llx in %s %pr\n",
Fixes: 7984d22f13 ("cxl/region: Add dev_dbg() detail on failure to allocate HPA space")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <linux-cxl@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102173917.19718-1-rdunlap@infradead.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the region driver fails while allocating HPA space for a
new region it can be because the parent resource, the CXL Window,
has no more available space.
In that case, the debug user sees this message:
cxl_core:alloc_hpa:555: cxl region2: failed to allocate HPA: -34
Expand the message like this:
cxl_core:alloc_hpa:555: cxl region8: HPA allocation error (-34) for size:0x20000000 in CXL Window 0 [mem 0xf010000000-0xf04fffffff flags 0x200]
Now the debug user can examine /proc/iomem and consider actions
like removing other allocations in that space or reducing the
size of their region request.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20231223004740.1401858-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a check to make sure the qos_class for the device will match one of
the root decoders qos_class. If no match is found, then the qos_class for
the device is set to invalid. Also add a check to ensure that the device's
host bridge matches to one of the root decoder's downstream targets.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319626313.2212653.9021004640856081917.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Export qos_class sysfs attributes for the CXL memory device. The QoS clas
should show up as /sys/bus/cxl/devices/memX/ram/qos_class for the volatile
partition and /sys/bus/cxl/devices/memX/pmem/qos_class for the persistent
partition. The QTG ID is retrieved via _DSM after supplying the
calculated bandwidth and latency for the entire CXL path from device to
the CPU. This ID is used to match up to the root decoder QoS class to
determine which CFMWS the memory range of a hotplugged CXL mem device
should be assigned under.
While there may be multiple DSMAS exported by the device CDAT, the driver
will only expose the first QTG ID per partition in sysfs for now. In the
future when multiple QTG IDs are necessary, they can be exposed. [1]
[1]: https://lore.kernel.org/linux-cxl/167571650007.587790.10040913293130712882.stgit@djiang5-mobl3.local/T/#md2a47b1ead3e1ba08f50eab29a4af1aed1d215ab
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319625698.2212653.17544381274847420961.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Once the QTG ID _DSM is executed successfully, the QTG ID is retrieved from
the return package. Create a list of entries in the cxl_memdev context and
store the QTG ID as qos_class token and the associated DPA range. This
information can be exposed to user space via sysfs in order to help region
setup for hot-plugged CXL memory devices.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319625109.2212653.11872111896220384056.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL Memory Device SW Guide [1] rev1.0 2.11.2 provides instruction on how to
calculate latency and bandwidth for CXL memory device. Calculate minimum
bandwidth and total latency for the path from the CXL device to the root
port. The QTG id is retrieved by providing the performance data as input
and calling the root port callback ->get_qos_class(). The retrieved id is
stored with the cxl_port of the CXL device.
For example for a device that is directly attached to a host bus:
Total Latency = Device Latency (from CDAT) + Dev to Host Bus (HB) Link
Latency + Generic Port Latency
Min Bandwidth = Min bandwidth for link bandwidth between HB
and CXL device, device CDAT bandwidth, and Generic Port
Bandwidth
For a device that has a switch in between host bus and CXL device:
Total Latency = Device (CDAT) Latency + Dev to Switch Link Latency +
Switch (CDAT) Latency + Switch to HB Link Latency +
Generic Port Latency
Min Bandwidth = Min bandwidth for link bandwidth between CXL device
to CXL switch, CXL device CDAT bandwidth, CXL switch CDAT
bandwidth, CXL switch to HB bandwidth, and Generic Port
Bandwidth.
[1]: https://cdrdv2-public.intel.com/643805/643805_CXL%20Memory%20Device%20SW%20Guide_Rev1p0.pdf
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319624458.2212653.13252496567443656371.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CDAT information from the switch, Switch Scoped Latency and Bandwidth
Information Structure (SSLBIS), is parsed and stored under a cxl_dport
based on the correlated downstream port id from the SSLBIS entry. Walk
the entire CXL port paths and collect all the performance data. Also
pick up the link latency number that's stored under the dports. The
entire path PCIe bandwidth can be retrieved using the
pcie_bandwidth_available() call.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319623824.2212653.10302079766473698427.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Each CXL host bridge is represented by an ACPI0016 device. A generic port
device handle that is an ACPI device is represented by a string of
ACPI0016 device HID and UID. Create a device handle from the ACPI device
and retrieve the access coordinates from the stored memory targets. The
access coordinates are stored under the cxl_dport that is associated with
the CXL host bridge.
The access coordinates struct is dynamically allocated under cxl_dport in
order for code later on to detect whether the data exists or not.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319623196.2212653.17916695743464172534.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The latency is calculated by dividing the flit size over the bandwidth. Add
support to retrieve the flit size for the CXL switch device and calculate
the latency of the PCIe link. Cache the latency number with cxl_dport.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319621931.2212653.6800240203604822886.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL spec v3.0 9.17.3 CXL Root Device Specific Methods (_DSM)
Add support to retrieve QTG ID via ACPI _DSM call. The _DSM call requires
an input of an ACPI package with 4 dwords (read latency, write latency,
read bandwidth, write bandwidth). The call returns a package with 1 WORD
that provides the max supported QTG ID and a package that may contain 0 or
more WORDs as the recommended QTG IDs in the recommended order.
Create a cxl_root container for the root cxl_port and provide a callback
->get_qos_class() in order to retrieve the QoS class. For the ACPI case,
the _DSM helper is used to retrieve the QTG ID and returned. A
devm_cxl_add_root() function is added for root port setup and registration
of the cxl_root callback operation(s).
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/170319621294.2212653.1649682083061569256.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide a callback to parse the Switched Scoped Latency and Bandwidth
Information Structure (SSLBIS) in the CDAT structures. The SSLBIS
contains the bandwidth and latency information that's tied to the
CXL switch that the data table has been read from. The extracted
values are stored to the cxl_dport correlated by the port_id
depending on the SSLBIS entry.
Coherent Device Attribute Table 1.03 2.1 Switched Scoped Latency
and Bandwidth Information Structure (DSLBIS)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319620635.2212653.5194389158785365150.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide a callback to parse the Device Scoped Latency and Bandwidth
Information Structure (DSLBIS) in the CDAT structures. The DSLBIS
contains the bandwidth and latency information that's tied to a DSMAS
handle. The driver will retrieve the read and write latency and
bandwidth associated with the DSMAS which is tied to a DPA range.
Coherent Device Attribute Table 1.03 2.1 Device Scoped Latency and
Bandwidth Information Structure (DSLBIS)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319620005.2212653.7475488478229720542.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Provide a callback function to the CDAT parser in order to parse the
Device Scoped Memory Affinity Structure (DSMAS). Each DSMAS structure
contains the DPA range and its associated attributes in each entry. See
the CDAT specification for details. The device handle and the DPA range
is saved and to be associated with the DSLBIS locality data when the
DSLBIS entries are parsed. The xarray is a local variable. When the
total path performance data is calculated and storred this xarray can be
discarded.
Coherent Device Attribute Table 1.03 2.1 Device Scoped memory Affinity
Structure (DSMAS)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319619355.2212653.2675953129671561293.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In devm_cxl_add_region(), devm_add_action_or_reset() is called by
passing in unregister_region() with data ptr of 'cxlr'. However, in
unregister_region(), the passed in parameter is incorrectly assumed to
be a 'struct device' rather than the 'cxlr' pointer. The code has been
working because 'struct device' is the first member of 'struct
cxl_region'. Issue found by inspection. Fix the assignment so that cxlr
is pointing directly to the passed in parameter.
Not flagged for -stable since there is no functional impact of this fix.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/170258123810.952211.3907381447996426480.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The new 6.7-rc1 kernel now checks the checksum on CDAT data. While
using a branch of Fan's DCD qemu work (and specifying DCD devices), the
following splat was observed.
WARNING: CPU: 1 PID: 1384 at drivers/base/devres.c:1064 devm_kfree+0x4f/0x60
...
RIP: 0010:devm_kfree+0x4f/0x60
...
? devm_kfree+0x4f/0x60
read_cdat_data+0x1a0/0x2a0 [cxl_core]
cxl_port_probe+0xdf/0x200 [cxl_port]
...
The issue in qemu is still unknown but the spat is a straight forward
bug in the CDAT checksum processing code. Use a CDAT buffer variable to
ensure the devm_free() works correctly on error.
Fixes: 670e4e88f3 ("cxl: Add checksum verification to CDAT from CXL")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: http://lore.kernel.org/r/20231116-fix-cdat-devm-free-v1-1-b148b40707d7@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The helper, cxl_dpa_resource_start(), snapshots the dpa-address of an
endpoint-decoder after acquiring the cxl_dpa_rwsem. However, it is
sufficient to assert that cxl_dpa_rwsem is held rather than acquire it
in the helper. Otherwise, it triggers multiple lockdep reports:
1/ Tracing callbacks are in an atomic context that can not acquire sleeping
locks:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1525
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1288, name: bash
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
[..]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0x71/0x90
__might_resched+0x1b2/0x2c0
down_read+0x1a/0x190
cxl_dpa_resource_start+0x15/0x50 [cxl_core]
cxl_trace_hpa+0x122/0x300 [cxl_core]
trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core]
2/ The rwsem is already held in the inject poison path:
WARNING: possible recursive locking detected
6.7.0-rc2+ #12 Tainted: G W OE N
--------------------------------------------
bash/1288 is trying to acquire lock:
ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_dpa_resource_start+0x15/0x50 [cxl_core]
but task is already holding lock:
ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_inject_poison+0x7d/0x1e0 [cxl_core]
[..]
Call Trace:
<TASK>
dump_stack_lvl+0x71/0x90
__might_resched+0x1b2/0x2c0
down_read+0x1a/0x190
cxl_dpa_resource_start+0x15/0x50 [cxl_core]
cxl_trace_hpa+0x122/0x300 [cxl_core]
trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core]
__traceiter_cxl_poison+0x5c/0x80 [cxl_core]
cxl_inject_poison+0x1bc/0x1e0 [cxl_core]
This appears to have been an issue since the initial implementation and
uncovered by the new cxl-poison.sh test [1]. That test is now passing with
these changes.
Fixes: 28a3ae4ff6 ("cxl/trace: Add an HPA to cxl_poison trace events")
Link: http://lore.kernel.org/r/e4f2716646918135ddbadf4146e92abb659de734.1700615159.git.alison.schofield@intel.com [1]
Cc: <stable@vger.kernel.org>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add the call to the UAPI such that userspace may corelate the
timestamps from the device log with system wall time, if, for
example there's any sort of inaccuracy or skew in the device.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230829152014.15452-1-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Poison inject and clear are supported via debugfs where a privileged
user can inject and clear poison to a device physical address.
Commit 458ba8189c ("cxl: Add cxl_decoders_committed() helper")
added a lockdep assert that highlighted a gap in poison inject and
clear functions where holding the dpa_rwsem does not assure that a
a DPA is not added to a region.
The impact for inject and clear is that if the DPA address being
injected or cleared has been attached to a region, but not yet
committed, the dev_dbg() message intended to alert the debug user
that they are acting on a mapped address is not emitted. Also, the
cxl_poison trace event that serves as a log of the inject and clear
activity will not include region info.
Close this gap by snapshotting an unchangeable region state during
poison inject and clear operations. That means holding both the
region_rwsem and the dpa_rwsem during the inject and clear ops.
Fixes: d2fbc48658 ("cxl/memdev: Add support for the Inject Poison mailbox command")
Fixes: 9690b07748 ("cxl/memdev: Add support for the Clear Poison mailbox command")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08721dc1df0a51e4e38fecd02425c3475912dfd5.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A read of a device poison list is triggered via a sysfs attribute
and the results are logged as kernel trace events of type cxl_poison.
The work is managed by either: a) the region driver when one of more
regions map the device, or by b) the memdev driver when no regions
map the device.
In the case of a) the region driver holds the region_rwsem while
reading the poison by committed endpoint decoder mappings and for
any unmapped resources. This makes sure that the cxl_poison trace
event trace reports valid region info. (Region name, HPA, and UUID).
In the case of b) the memdev driver holds the dpa_rwsem preventing
new DPA resources from being attached to a region. However, it leaves
a gap between region attach and decoder commit actions. If a DPA in
the gap is in the poison list, the cxl_poison trace event will omit
the region info.
Close the gap by holding the region_rwsem and the dpa_rwsem when
reading poison per memdev. Since both methods now hold both locks,
down_read both from the caller. Doing so also addresses the lockdep
assert that found this issue:
Commit 458ba8189c ("cxl: Add cxl_decoders_committed() helper")
Fixes: f0832a5863 ("cxl/region: Provide region info to the cxl_poison trace event")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08e8e7ec9a3413b91d51de39e385653494b1eed0.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The new helper "cxl_num_decoders_committed()" added a lockdep assertion
to validate that port->commit_end is protected against modification.
That assertion fires in init_hdm_decoder() where it is initializing
port->commit_end. Given that it is both accessing and writing that
property it obstensibly needs the lock.
In practice, CXL decoder commit rules (must commit in order) and the
in-order discovery of device decoders makes the manipulation of
->commit_end in init_hdm_decoder() safe. However, rather than rely on
the subtle rules of CXL hardware, just make the implementation obviously
correct from a software perspective.
The Fixes: tag is only for cleaning up a lockdep splat, there is no
functional issue addressed by this fix.
Fixes: 458ba8189c ("cxl: Add cxl_decoders_committed() helper")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170025232811.2147250.16376901801315194121.stgit@djiang5-mobl3
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Native CXL protocol errors are delivered to the OS through AER
reporting. The owner of AER owns CXL Protocol error management with
respect to _OSC negotiation.[1] CXL device errors are handled by a
separate interrupt with native control gated by _OSC control field
'CXL Memory Error Reporting Control'.
The CXL driver incorrectly checks for 'CXL Memory Error Reporting
Control' before accessing AER registers and caching RCH downport
AER registers. Replace the current check in these 2 cases with
native AER checks.
[1] CXL 3.0 - 9.17.2 CXL _OSC, Table-9-26, Interpretation of CXL
_OSC Support Fields, p.641
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20231102155232.1421261-1-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan reports that cxl_decoder_commit() potentially leaks a hold of
cxl_dpa_rwsem. The potential error case is a "should not" happen
scenario, turn it into a "can not" happen scenario by adding the error
check to cxl_port_setup_targets() where other setting validation occurs.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: http://lore.kernel.org/r/63295673-5d63-4919-b851-3b06d48734c0@moroto.mountain
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If "info" is NULL then this code will crash. || was intended instead of
&&.
Fixes: 8ce520fdea ("cxl/hdm: Use stored Component Register mappings to map HDM decoder capability")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/60028378-d3d5-4d6d-90fd-f915f061e731@moroto.mountain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
