Commit Graph

595 Commits

Author SHA1 Message Date
Zhipeng Lu
f3616173bf atm: idt77252: fix a memleak in open_card_ubr0
When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise,
in the following call chain:

idt77252_init_one
  |-> idt77252_dev_open
        |-> open_card_ubr0
              |-> alloc_scq [failed]
  |-> deinit_card
        |-> vfree(card->vcs);

card->vcs is freed and card->vcs[0] is leaked.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-03 12:46:13 +00:00
Jakub Kicinski
fc0caed81b net: fill in MODULE_DESCRIPTION()s for ATM
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the ATM modules and drivers.

Link: https://lore.kernel.org/r/20240104143737.1317945-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05 08:04:23 -08:00
Chengfeng Ye
15319a4e8e atm: solos-pci: Fix potential deadlock on &tx_queue_lock
As &card->tx_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.

<deadlock #2>
pclose()
--> spin_lock(&card->tx_queue_lock)
<interrupt>
   --> solos_bh()
   --> fpga_tx()
   --> spin_lock(&card->tx_queue_lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh()
on &card->tx_queue_lock under process context code consistently to
prevent the possible deadlock scenario.

Fixes: 213e85d389 ("solos-pci: clean up pclose() function")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-09 21:17:45 +00:00
Chengfeng Ye
d5dba32b8f atm: solos-pci: Fix potential deadlock on &cli_queue_lock
As &card->cli_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.

<deadlock #1>
console_show()
--> spin_lock(&card->cli_queue_lock)
<interrupt>
   --> solos_bh()
   --> spin_lock(&card->cli_queue_lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh()
on the card->cli_queue_lock under process context code consistently
to prevent the possible deadlock scenario.

Fixes: 9c54004ea7 ("atm: Driver for Solos PCI ADSL2+ card.")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-09 21:17:45 +00:00
Linus Torvalds
27beb3ca34 pci-v6.7-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmVBaU8UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwEdxAAo++s98+ZaaTdUuoV0Zpft1fuY6Yr
 mR80jUDxjHDbcI1G4iNVUSWG6pGIdlURnrBp5kU74FV9R2Ps3Fl49XQUHowE0HfH
 D/qmihiJQdnMsQKwzw3XGoTSINrDcF6nLafl9brBItVkgjNxfxSEbnweJMBf+Boc
 rpRXHzxbVHVjwwhBLODF2Wt/8sQ24w9c+wcQkpo7im8ZZReoigNMKgEa4J7tLlqA
 vTyPR/K6QeU8IBUk2ObCY3GeYrVuqi82eRK3Uwzu7IkQwA9orE416Okvq3Z026/h
 TUAivtrcygHaFRdGNvzspYLbc2hd2sEXF+KKKb6GNAjxuDWUhVQW4ObY4FgFkZ65
 Gqz/05D6c1dqTS3vTxp3nZYpvPEbNnO1RaGRL4h0/mbU+QSPSlHXWd9Lfg6noVVd
 3O+CcstQK8RzMiiWLeyctRPV5XIf7nGVQTJW5aCLajlHeJWcvygNpNG4N57j/hXQ
 gyEHrz3idXXHXkBKmyWZfre6YpLkxZtKyONZDHWI/AVhU0TgRdJWmqpRfC1kVVUe
 IUWBRcPUF4/r3jEu6t10N/aDWQN1uQzIsJNnCrKzAddPDTTYQJk8VVzKPo8SVxPD
 X+OjEMgBB/fXUfkJ7IMwgYnWaFJhxthrs6/3j1UqRvGYRoulE4NdWwJDky9UYIHd
 qV3dzuAxC/cpv08=
 =G//C
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...
2023-11-02 14:05:18 -10:00
Ilpo Järvinen
c28742447c atm: iphase: Do PCI error checks on own line
In get_esi() PCI errors are checked inside line-split "if" conditions (in
addition to the file not following the coding style). To make the code in
get_esi() more readable, fix the coding style and use the usual error
handling pattern with a separate variable.

In addition, initialization of 'error' variable at declaration is not
needed.

No functional changes intended.

Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-10 16:40:13 -05:00
Rob Herring
f0107b864f atm: fore200e: Drop unnecessary of_match_device()
It is not necessary to call of_match_device() in probe. If we made it to
probe, then we've already successfully matched.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231006214421.339445-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10 12:41:17 +02:00
Li Zetao
4fe3c88552 atm: idt77252: fix kmemleak when rmmod idt77252
There are memory leaks reported by kmemleak:

  unreferenced object 0xffff888106500800 (size 128):
    comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
      [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
      [<000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252]
      [<000000006efb048e>] local_pci_probe+0xeb/0x1a0
    ...

  unreferenced object 0xffff888106500b00 (size 128):
    comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
    hex dump (first 32 bytes):
      00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff  . =...... =.....
      f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00  .#=...... =.....
    backtrace:
      [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
      [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
      [<00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252]
      [<00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]

The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.

Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-21 20:19:28 -07:00
Steven Rostedt (Google)
292a089d78 treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-25 13:38:09 -08:00
Duoming Zhou
3f4093e2bf atm: idt77252: fix use-after-free bugs caused by tst_timer
There are use-after-free bugs caused by tst_timer. The root cause
is that there are no functions to stop tst_timer in idt77252_exit().
One of the possible race conditions is shown below:

    (thread 1)          |        (thread 2)
                        |  idt77252_init_one
                        |    init_card
                        |      fill_tst
                        |        mod_timer(&card->tst_timer, ...)
idt77252_exit           |  (wait a time)
                        |  tst_timer
                        |
                        |    ...
  kfree(card) // FREE   |
                        |    card->soft_tst[e] // USE

The idt77252_dev is deallocated in idt77252_exit() and used in
timer handler.

This patch adds del_timer_sync() in idt77252_exit() in order that
the timer handler could be stopped before the idt77252_dev is
deallocated.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08 20:51:59 -07:00
Christophe JAILLET
9e433ac1a3 atm: he: Use the bitmap API to allocate bitmaps
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7f795bd6d5b2a00f581175b7069b229c2e5a4192.1657379127.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11 19:49:53 -07:00
Xiang wangx
f691b4d87e atm: iphase: Fix typo in comment
Delete the redundant word 'the'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220616164155.11686-1-wangxiang@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:17:18 -07:00
Jakub Kicinski
052e1f01bf net: atm: remove support for ZeitNet ZN122x ATM devices
This driver received nothing but automated fixes in the last 15 years.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27 12:22:56 +01:00
Jakub Kicinski
5b74a20d35 net: atm: remove support for Madge Horizon ATM devices
This driver received nothing but automated fixes since git era begun.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27 12:22:56 +01:00
Jakub Kicinski
41c335c821 net: atm: remove support for Fujitsu FireStream ATM devices
This driver received nothing but automated fixes (mostly spelling
and compiler warnings) since git era begun. Since it's using
virt_to_bus it's unlikely to be used on any modern platform.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27 12:22:56 +01:00
Bjorn Helgaas
e39f63fe0d net: remove comments that mention obsolete __SLOW_DOWN_IO
The only remaining definitions of __SLOW_DOWN_IO (for alpha and ia64) do
nothing, and the only mentions in networking are in comments.  Remove these
mentions.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26 17:09:24 -07:00
Jakub Kicinski
e05afd0848 net: atm: remove the ambassador driver
The driver for ATM Ambassador devices spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.

In fact it sounds like the FW loading was broken from 2008
'til 2012 - see commit fcdc90b025 ("atm: forever loop loading
ambassador firmware").

Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.

Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08 12:06:11 +01:00
Jakub Kicinski
e243f39685 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17 13:56:58 -07:00
Jiasheng Jiang
0f74b29a4f atm: eni: Add check for dma_map_single
As the potential failure of the dma_map_single(),
it should be better to check it and return error
if fails.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-15 11:01:52 +00:00
Jakub Kicinski
80901bff81 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/batman-adv/hard-interface.c
  commit 690bb6fb64 ("batman-adv: Request iflink once in batadv-on-batadv check")
  commit 6ee3c393ee ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/

net/smc/af_smc.c
  commit 4d08b7b57e ("net/smc: Fix cleanup when register ULP fails")
  commit 462791bbfa ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03 11:55:12 -08:00
Jia-Ju Bai
d4e26aaea7 atm: firestream: check the return value of ioremap() in fs_init()
The function ioremap() in fs_init() can fail, so its return value should
be checked.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28 11:36:01 +00:00
Christophe JAILLET
92c54a65e6 atm: nicstar: Use kcalloc() to simplify code
Use kcalloc() instead of kmalloc_array() and a loop to set all the values
of the array to NULL.

While at it, remove a duplicated assignment to 'scq->num_entries'.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19 16:38:12 +00:00
Colin Ian King
d7b4303411 atm: iphase: remove redundant pointer skb
The pointer skb is redundant, it is assigned a value that is never
read and hence can be removed. Cleans up clang scan warning:

drivers/atm/iphase.c:205:18: warning: Although the value stored
to 'skb' is used in the enclosing expression, the value is never
actually read from 'skb' [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-13 12:50:48 +00:00
Jun Miao
64ec13ec92 atm: horizon: Fix spelling mistakes in TX comment
It's "must not", not "musn't", meaning "shall not".
Let's fix that.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Jun Miao <jun.miao@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08 12:58:42 +01:00
Colin Ian King
d43b239314 atm: idt77252: clean up trigraph warning on ??) string
The character sequence ??) is a trigraph and causes the following
clang warning:

drivers/atm/idt77252.c:3544:35: warning: trigraph ignored [-Wtrigraphs]

Clean this by replacing it with single ?.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 07:24:13 -07:00
Linus Torvalds
dbe69e4337 Networking changes for 5.14.
Core:
 
  - BPF:
    - add syscall program type and libbpf support for generating
      instructions and bindings for in-kernel BPF loaders (BPF loaders
      for BPF), this is a stepping stone for signed BPF programs
    - infrastructure to migrate TCP child sockets from one listener
      to another in the same reuseport group/map to improve flexibility
      of service hand-off/restart
    - add broadcast support to XDP redirect
 
  - allow bypass of the lockless qdisc to improving performance
    (for pktgen: +23% with one thread, +44% with 2 threads)
 
  - add a simpler version of "DO_ONCE()" which does not require
    jump labels, intended for slow-path usage
 
  - virtio/vsock: introduce SOCK_SEQPACKET support
 
  - add getsocketopt to retrieve netns cookie
 
  - ip: treat lowest address of a IPv4 subnet as ordinary unicast address
        allowing reclaiming of precious IPv4 addresses
 
  - ipv6: use prandom_u32() for ID generation
 
  - ip: add support for more flexible field selection for hashing
        across multi-path routes (w/ offload to mlxsw)
 
  - icmp: add support for extended RFC 8335 PROBE (ping)
 
  - seg6: add support for SRv6 End.DT46 behavior
 
  - mptcp:
     - DSS checksum support (RFC 8684) to detect middlebox meddling
     - support Connection-time 'C' flag
     - time stamping support
 
  - sctp: packetization Layer Path MTU Discovery (RFC 8899)
 
  - xfrm: speed up state addition with seq set
 
  - WiFi:
     - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
     - aggregation handling improvements for some drivers
     - minstrel improvements for no-ack frames
     - deferred rate control for TXQs to improve reaction times
     - switch from round robin to virtual time-based airtime scheduler
 
  - add trace points:
     - tcp checksum errors
     - openvswitch - action execution, upcalls
     - socket errors via sk_error_report
 
 Device APIs:
 
  - devlink: add rate API for hierarchical control of max egress rate
             of virtual devices (VFs, SFs etc.)
 
  - don't require RCU read lock to be held around BPF hooks
    in NAPI context
 
  - page_pool: generic buffer recycling
 
 New hardware/drivers:
 
  - mobile:
     - iosm: PCIe Driver for Intel M.2 Modem
     - support for Qualcomm MSM8998 (ipa)
 
  - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
 
  - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
 
  - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
 
  - NXP SJA1110 Automotive Ethernet 10-port switch
 
  - Qualcomm QCA8327 switch support (qca8k)
 
  - Mikrotik 10/25G NIC (atl1c)
 
 Driver changes:
 
  - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
    (our first foray into MAC/PHY description via ACPI)
 
  - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
 
  - Mellanox/Nvidia NIC (mlx5)
    - NIC VF offload of L2 bridging
    - support IRQ distribution to Sub-functions
 
  - Marvell (prestera):
     - add flower and match all
     - devlink trap
     - link aggregation
 
  - Netronome (nfp): connection tracking offload
 
  - Intel 1GE (igc): add AF_XDP support
 
  - Marvell DPU (octeontx2): ingress ratelimit offload
 
  - Google vNIC (gve): new ring/descriptor format support
 
  - Qualcomm mobile (rmnet & ipa): inline checksum offload support
 
  - MediaTek WiFi (mt76)
     - mt7915 MSI support
     - mt7915 Tx status reporting
     - mt7915 thermal sensors support
     - mt7921 decapsulation offload
     - mt7921 enable runtime pm and deep sleep
 
  - Realtek WiFi (rtw88)
     - beacon filter support
     - Tx antenna path diversity support
     - firmware crash information via devcoredump
 
  - Qualcomm 60GHz WiFi (wcn36xx)
     - Wake-on-WLAN support with magic packets and GTK rekeying
 
  - Micrel PHY (ksz886x/ksz8081): add cable test support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDb+fUACgkQMUZtbf5S
 Irs2Jg//aqN0Q8CgIvYCVhPxQw1tY7pTAbgyqgBZ01vwjyvtIOgJiWzSfFEU84mX
 M8fcpFX5eTKrOyJ9S6UFfQ/JG114n3hjAxFFT4Hxk2gC1Tg0vHuFQTDHcUl28bUE
 mTm61e1YpdorILnv2k5JVQ/wu0vs5QKDrjcYcrcPnh+j93wvnPOgAfDBV95nZzjS
 OTt4q2fR8GzLcSYWWsclMbDNkzyTG50RW/0Yd6aGjr5QGvXfrMeXfUJNz533PMf/
 w5lNyjRKv+x9mdTZJzU0+msNUrZgUdRz7W8Ey8lD3hJZRE+D6/uU7FtsE8Mi3+uc
 HWxeZUyzA3YF1MfVl/eesbxyPT7S/OkLzk4O5B35FbqP0YltaP+bOjq1/nM3ce1/
 io9Dx9pIl/2JANUgRCAtLi8Z2dkvRoqTaBxZ/nPudCCljFwDwl6joTMJ7Ow22i5Y
 5aIkcXFmZq4LbJDiHvbTlqT7yiuaEvu2UK/23bSIg/K3nF4eAmkY9Y1EgiMf60OF
 78Ttw0wk2tUegwaS5MZnCniKBKDyl9gM2F6rbZ/IxQRR2LTXFc1B6gC+ynUxgXfh
 Ub8O++6qGYGYZ0XvQH4pzco79p3qQWBTK5beIp2eu6BOAjBVIXq4AibUfoQLACsu
 hX7jMPYd0kc3WFgUnKgQP8EnjFSwbf4XiaE7fIXvWBY8hzCw2h4=
 =LvtX
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...
2021-06-30 15:51:09 -07:00
Jakub Kicinski
b6df00789e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in net/netfilter/nf_tables_api.c.

Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.

skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29 15:45:27 -07:00
Zheyu Ma
70b639dc41 atm: nicstar: register the interrupt handler in the right place
Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.

This log reveals it:

[    3.438724] Trying to free already-free IRQ 23
[    3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[    3.440039] Modules linked in:
[    3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.441561] RIP: 0010:free_irq+0xfb/0x480
[    3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994] FS:  0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[    3.444994] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.444994] Call Trace:
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Kernel panic - not syncing: panic_on_warn set ...
[    3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.444994] Call Trace:
[    3.444994]  dump_stack+0xba/0xf5
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  panic+0x155/0x3ed
[    3.444994]  ? __warn+0xed/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  __warn+0x103/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  report_bug+0x119/0x1c0
[    3.444994]  handle_bug+0x3b/0x80
[    3.444994]  exc_invalid_op+0x18/0x70
[    3.444994]  asm_exc_invalid_op+0x12/0x20
[    3.444994] RIP: 0010:free_irq+0xfb/0x480
[    3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994]  ? vprintk_func+0x71/0x110
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Dumping ftrace buffer:
[    3.444994]    (ftrace buffer empty)
[    3.444994] Kernel Offset: disabled
[    3.444994] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 14:28:53 -07:00
Zheyu Ma
6a1e5a4af1 atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.

Fix this by using 'dma_free_coherent' instead of 'kfree'

This log reveals it:

[    3.440294] kernel BUG at mm/slub.c:4206!
[    3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[    3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[    3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.442780] RIP: 0010:kfree+0x26a/0x300
[    3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.443396] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.443396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.443396] Call Trace:
[    3.443396]  ns_init_card_error+0x12c/0x220
[    3.443396]  nicstar_init_one+0x10d2/0x1130
[    3.443396]  local_pci_probe+0x4a/0xb0
[    3.443396]  pci_device_probe+0x126/0x1d0
[    3.443396]  ? pci_device_remove+0x100/0x100
[    3.443396]  really_probe+0x27e/0x650
[    3.443396]  driver_probe_device+0x84/0x1d0
[    3.443396]  ? mutex_lock_nested+0x16/0x20
[    3.443396]  device_driver_attach+0x63/0x70
[    3.443396]  __driver_attach+0x117/0x1a0
[    3.443396]  ? device_driver_attach+0x70/0x70
[    3.443396]  bus_for_each_dev+0xb6/0x110
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  driver_attach+0x22/0x30
[    3.443396]  bus_add_driver+0x1e6/0x2a0
[    3.443396]  driver_register+0xa4/0x180
[    3.443396]  __pci_register_driver+0x77/0x80
[    3.443396]  ? uPD98402_module_init+0xd/0xd
[    3.443396]  nicstar_init+0x1f/0x75
[    3.443396]  do_one_initcall+0x7a/0x3d0
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.443396]  kernel_init_freeable+0x2a7/0x2f9
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  kernel_init+0x13/0x180
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ret_from_fork+0x1f/0x30
[    3.443396] Modules linked in:
[    3.443396] Dumping ftrace buffer:
[    3.443396]    (ftrace buffer empty)
[    3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[    3.458922] RIP: 0010:kfree+0x26a/0x300
[    3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.463368] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.463949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.465860] Kernel panic - not syncing: Fatal exception
[    3.466370] Dumping ftrace buffer:
[    3.466616]    (ftrace buffer empty)
[    3.466871] Kernel Offset: disabled
[    3.467122] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 14:28:53 -07:00
zuoqilin
04fdfad68b atm: Fix typo
Change 'contol' to 'control'.

Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21 13:55:32 -07:00
Gustavo A. R. Silva
47ce0b65bf atm: fore200e: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a fallthrough pseudo-keyword.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-05-17 18:50:49 -05:00
Zou Wei
34e7434ba4 atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:03:54 -07:00
Zou Wei
1c72e6ab66 atm: iphase: fix possible use-after-free in ia_module_exit()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:12:03 -07:00
Andy Shevchenko
532062b099 atm: Replace custom isprint() with generic analogue
Custom isprint() definition may collide with one form ctype.h.
In order to avoid this, replace it with a functional analogue
which is isascii() && isprint() in this case.

First appearance of the code is in the commit 636b38438001
("Import 2.3.43").

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10 14:51:01 -07:00
Wei Ming Chen
7d18dbddb7 atm: firestream: Use fallthrough pseudo-keyword
Add pseudo-keyword macro fallthrough[1]

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07 16:01:08 -07:00
Linus Torvalds
9d31d23389 Networking changes for 5.13.
Core:
 
  - bpf:
 	- allow bpf programs calling kernel functions (initially to
 	  reuse TCP congestion control implementations)
 	- enable task local storage for tracing programs - remove the
 	  need to store per-task state in hash maps, and allow tracing
 	  programs access to task local storage previously added for
 	  BPF_LSM
 	- add bpf_for_each_map_elem() helper, allowing programs to
 	  walk all map elements in a more robust and easier to verify
 	  fashion
 	- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
 	  redirection
 	- lpm: add support for batched ops in LPM trie
 	- add BTF_KIND_FLOAT support - mostly to allow use of BTF
 	  on s390 which has floats in its headers files
 	- improve BPF syscall documentation and extend the use of kdoc
 	  parsing scripts we already employ for bpf-helpers
 	- libbpf, bpftool: support static linking of BPF ELF files
 	- improve support for encapsulation of L2 packets
 
  - xdp: restructure redirect actions to avoid a runtime lookup,
 	improving performance by 4-8% in microbenchmarks
 
  - xsk: build skb by page (aka generic zerocopy xmit) - improve
 	performance of software AF_XDP path by 33% for devices
 	which don't need headers in the linear skb part (e.g. virtio)
 
  - nexthop: resilient next-hop groups - improve path stability
 	on next-hops group changes (incl. offload for mlxsw)
 
  - ipv6: segment routing: add support for IPv4 decapsulation
 
  - icmp: add support for RFC 8335 extended PROBE messages
 
  - inet: use bigger hash table for IP ID generation
 
  - tcp: deal better with delayed TX completions - make sure we don't
 	give up on fast TCP retransmissions only because driver is
 	slow in reporting that it completed transmitting the original
 
  - tcp: reorder tcp_congestion_ops for better cache locality
 
  - mptcp:
 	- add sockopt support for common TCP options
 	- add support for common TCP msg flags
 	- include multiple address ids in RM_ADDR
 	- add reset option support for resetting one subflow
 
  - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
 	co-existence with UDP tunnel GRO, allowing the first to take
 	place correctly	even for encapsulated UDP traffic
 
  - micro-optimize dev_gro_receive() and flow dissection, avoid
 	retpoline overhead on VLAN and TEB GRO
 
  - use less memory for sysctls, add a new sysctl type, to allow using
 	u8 instead of "int" and "long" and shrink networking sysctls
 
  - veth: allow GRO without XDP - this allows aggregating UDP
 	packets before handing them off to routing, bridge, OvS, etc.
 
  - allow specifing ifindex when device is moved to another namespace
 
  - netfilter:
 	- nft_socket: add support for cgroupsv2
 	- nftables: add catch-all set element - special element used
 	  to define a default action in case normal lookup missed
 	- use net_generic infra in many modules to avoid allocating
 	  per-ns memory unnecessarily
 
  - xps: improve the xps handling to avoid potential out-of-bound
 	accesses and use-after-free when XPS change race with other
 	re-configuration under traffic
 
  - add a config knob to turn off per-cpu netdev refcnt to catch
 	underflows in testing
 
 Device APIs:
 
  - add WWAN subsystem to organize the WWAN interfaces better and
    hopefully start driving towards more unified and vendor-
    -independent APIs
 
  - ethtool:
 	- add interface for reading IEEE MIB stats (incl. mlx5 and
 	  bnxt support)
 	- allow network drivers to dump arbitrary SFP EEPROM data,
 	  current offset+length API was a poor fit for modern SFP
 	  which define EEPROM in terms of pages (incl. mlx5 support)
 
  - act_police, flow_offload: add support for packet-per-second
 	policing (incl. offload for nfp)
 
  - psample: add additional metadata attributes like transit delay
 	for packets sampled from switch HW (and corresponding egress
 	and policy-based sampling in the mlxsw driver)
 
  - dsa: improve support for sandwiched LAGs with bridge and DSA
 
  - netfilter:
 	- flowtable: use direct xmit in topologies with IP
 	  forwarding, bridging, vlans etc.
 	- nftables: counter hardware offload support
 
  - Bluetooth:
 	- improvements for firmware download w/ Intel devices
 	- add support for reading AOSP vendor capabilities
 	- add support for virtio transport driver
 
  - mac80211:
 	- allow concurrent monitor iface and ethernet rx decap
 	- set priority and queue mapping for injected frames
 
  - phy: add support for Clause-45 PHY Loopback
 
  - pci/iov: add sysfs MSI-X vector assignment interface
 	to distribute MSI-X resources to VFs (incl. mlx5 support)
 
 New hardware/drivers:
 
  - dsa: mv88e6xxx: add support for Marvell mv88e6393x -
 	11-port Ethernet switch with 8x 1-Gigabit Ethernet
 	and 3x 10-Gigabit interfaces.
 
  - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
 	and BCM63xx switches
 
  - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
 
  - ath11k: support for QCN9074 a 802.11ax device
 
  - Bluetooth: Broadcom BCM4330 and BMC4334
 
  - phy: Marvell 88X2222 transceiver support
 
  - mdio: add BCM6368 MDIO mux bus controller
 
  - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
 
  - mana: driver for Microsoft Azure Network Adapter (MANA)
 
  - Actions Semi Owl Ethernet MAC
 
  - can: driver for ETAS ES58X CAN/USB interfaces
 
 Pure driver changes:
 
  - add XDP support to: enetc, igc, stmmac
  - add AF_XDP support to: stmmac
 
  - virtio:
 	- page_to_skb() use build_skb when there's sufficient tailroom
 	  (21% improvement for 1000B UDP frames)
 	- support XDP even without dedicated Tx queues - share the Tx
 	  queues with the stack when necessary
 
  - mlx5:
 	- flow rules: add support for mirroring with conntrack,
 	  matching on ICMP, GTP, flex filters and more
 	- support packet sampling with flow offloads
 	- persist uplink representor netdev across eswitch mode
 	  changes
 	- allow coexistence of CQE compression and HW time-stamping
 	- add ethtool extended link error state reporting
 
  - ice, iavf: support flow filters, UDP Segmentation Offload
 
  - dpaa2-switch:
 	- move the driver out of staging
 	- add spanning tree (STP) support
 	- add rx copybreak support
 	- add tc flower hardware offload on ingress traffic
 
  - ionic:
 	- implement Rx page reuse
 	- support HW PTP time-stamping
 
  - octeon: support TC hardware offloads - flower matching on ingress
 	and egress ratelimitting.
 
  - stmmac:
 	- add RX frame steering based on VLAN priority in tc flower
 	- support frame preemption (FPE)
 	- intel: add cross time-stamping freq difference adjustment
 
  - ocelot:
 	- support forwarding of MRP frames in HW
 	- support multiple bridges
 	- support PTP Sync one-step timestamping
 
  - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
 	learning, flooding etc.
 
  - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
 	SC7280 SoCs)
 
  - mt7601u: enable TDLS support
 
  - mt76:
 	- add support for 802.3 rx frames (mt7915/mt7615)
 	- mt7915 flash pre-calibration support
 	- mt7921/mt7663 runtime power management fixes
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
 Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
 Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
 q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
 I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
 zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
 rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
 =vcbA
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
2021-04-29 11:57:23 -07:00
Linus Torvalds
91552ab8ff The usual updates from the irq departement:
Core changes:
 
  - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be
    cleaned up which either use a seperate mechanism to prevent auto-enable
    at request time or have a racy mechanism which disables the interrupt
    right after request.
 
  - Get rid of the last usage of irq_create_identity_mapping() and remove
    the interface.
 
  - An overhaul of tasklet_disable(). Most usage sites of tasklet_disable()
    are in task context and usually in cleanup, teardown code pathes.
    tasklet_disable() spinwaits for a tasklet which is currently executed.
    That's not only a problem for PREEMPT_RT where this can lead to a live
    lock when the disabling task preempts the softirq thread. It's also
    problematic in context of virtualization when the vCPU which runs the
    tasklet is scheduled out and the disabling code has to spin wait until
    it's scheduled back in. Though there are a few code pathes which invoke
    tasklet_disable() from non-sleepable context. For these a new disable
    variant which still spinwaits is provided which allows to switch
    tasklet_disable() to a sleep wait mechanism. For the atomic use cases
    this does not solve the live lock issue on PREEMPT_RT. That is mitigated
    by blocking on the RT specific softirq lock.
 
  - The PREEMPT_RT specific implementation of softirq processing and
    local_bh_disable/enable().
 
    On RT enabled kernels soft interrupt processing happens always in task
    context and all interrupt handlers, which are not explicitly marked to
    be invoked in hard interrupt context are forced into task context as
    well. This allows to protect against softirq processing with a per
    CPU lock, which in turn allows to make BH disabled regions preemptible.
 
    Most of the softirq handling code is still shared. The RT/non-RT
    specific differences are addressed with a set of inline functions which
    provide the context specific functionality. The local_bh_disable() /
    local_bh_enable() mechanism are obviously seperate.
 
  - The usual set of small improvements and cleanups
 
 Driver changes:
 
  - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers
 
  - Extended functionality for MStar, STM32 and SC7280 irq chips
 
  - Enhanced robustness for ARM GICv3/4.1 drivers
 
  - The usual set of cleanups and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmCGh5wTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoZ+/EACWBpQ/2ZHizEw1bzjaDzJrR8U228xu
 wNi7nSP92Y07nJ3cCX7a6TJ53mqd0n3RT+DprlsOuqSN0D7Ktr/x44V/aZtm0d3N
 GkFOlpeGCRnHusLaUTwk7a8289LuoQ7OhSxIB409n1I4nLI96ZK41D1tYonMYl6E
 nxDiGADASfjaciBWbjwJO/mlwmiW/VRpSTxswx0wzakFfbIx9iKyKv1bCJQZ5JK+
 lHmf0jxpDIs1EVK/ElJ9Ky6TMBlEmZyiX7n6rujtwJ1W+Jc/uL/y8pLJvGwooVmI
 yHTYsLMqzviCbAMhJiB3h1qs3GbCGlM78prgJTnOd0+xEUOCcopCRQlsTXVBq8Nb
 OS+HNkYmYXRfiSH6lINJsIok8Xis28bAw/qWz2Ho+8wLq0TI8crK38roD1fPndee
 FNJRhsPPOBkscpIldJ0Cr0X5lclkJFiAhAxORPHoseKvQSm7gBMB7H99xeGRffTn
 yB3XqeTJMvPNmAHNN4Brv6ey3OjwnEWBgwcnIM2LtbIlRtlmxTYuR+82OPOgEvzk
 fSrjFFJqu0LEMLEOXS4pYN824PawjV//UAy4IaG8AodmUUCSGHgw1gTVa4sIf72t
 tXY54HqWfRWRpujhVRgsZETqBUtZkL6yvpoe8f6H7P91W5tAfv3oj4ch9RkhUo+Z
 b0/u9T0+Fpbg+w==
 =id4G
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The usual updates from the irq departement:

  Core changes:

   - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
     be cleaned up which either use a seperate mechanism to prevent
     auto-enable at request time or have a racy mechanism which disables
     the interrupt right after request.

   - Get rid of the last usage of irq_create_identity_mapping() and
     remove the interface.

   - An overhaul of tasklet_disable().

     Most usage sites of tasklet_disable() are in task context and
     usually in cleanup, teardown code pathes. tasklet_disable()
     spinwaits for a tasklet which is currently executed. That's not
     only a problem for PREEMPT_RT where this can lead to a live lock
     when the disabling task preempts the softirq thread. It's also
     problematic in context of virtualization when the vCPU which runs
     the tasklet is scheduled out and the disabling code has to spin
     wait until it's scheduled back in.

     There are a few code pathes which invoke tasklet_disable() from
     non-sleepable context. For these a new disable variant which still
     spinwaits is provided which allows to switch tasklet_disable() to a
     sleep wait mechanism. For the atomic use cases this does not solve
     the live lock issue on PREEMPT_RT. That is mitigated by blocking on
     the RT specific softirq lock.

   - The PREEMPT_RT specific implementation of softirq processing and
     local_bh_disable/enable().

     On RT enabled kernels soft interrupt processing happens always in
     task context and all interrupt handlers, which are not explicitly
     marked to be invoked in hard interrupt context are forced into task
     context as well. This allows to protect against softirq processing
     with a per CPU lock, which in turn allows to make BH disabled
     regions preemptible.

     Most of the softirq handling code is still shared. The RT/non-RT
     specific differences are addressed with a set of inline functions
     which provide the context specific functionality. The
     local_bh_disable() / local_bh_enable() mechanism are obviously
     seperate.

   - The usual set of small improvements and cleanups

  Driver changes:

   - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
     controllers

   - Extended functionality for MStar, STM32 and SC7280 irq chips

   - Enhanced robustness for ARM GICv3/4.1 drivers

   - The usual set of cleanups and improvements all over the place"

* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
  irqchip/gic-v3: Do not enable irqs when handling spurious interrups
  dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
  irqchip: Add support for IDT 79rc3243x interrupt controller
  irqdomain: Drop references to recusive irqdomain setup
  irqdomain: Get rid of irq_create_strict_mappings()
  irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
  ARM: PXA: Kill use of irq_create_strict_mappings()
  irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
  irqchip/tb10x: Use 'fallthrough' to eliminate a warning
  genirq: Reduce irqdebug cacheline bouncing
  kernel: Initialize cpumask before parsing
  irqchip/wpcm450: Drop COMPILE_TEST
  irqchip/irq-mst: Support polarity configuration
  irqchip: Add driver for WPCM450 interrupt controller
  dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
  dt-bindings: qcom,pdc: Add compatible for sc7280
  irqchip/stm32: Add usart instances exti direct event support
  irqchip/gic-v3: Fix OF_BAD_ADDR error handling
  irqchip/sifive-plic: Mark two global variables __ro_after_init
  ...
2021-04-26 09:43:16 -07:00
Colin Ian King
cbbd21a47f net/atm: Fix spelling mistake "requed" -> "requeued"
There is a spelling mistake in a printk message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:10:43 -07:00
Jiapeng Chong
73d7de66aa atm: idt77252: remove unused function
Fix the following clang warning:

drivers/atm/idt77252.c:1787:1: warning: unused function
'idt77252_fbq_level' [-Wunused-function].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14 13:52:59 -07:00
David S. Miller
efd13b71a3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25 15:31:22 -07:00
Leon Romanovsky
6417f03132 module: remove never implemented MODULE_SUPPORTED_DEVICE
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17 13:16:18 -07:00
Sebastian Andrzej Siewior
405698ca35 atm: eni: Use tasklet_disable_in_atomic() in the send() callback
The atmdev_ops::send callback which calls tasklet_disable() is invoked with
bottom halfs disabled from net_device_ops::ndo_start_xmit(). All other
invocations of tasklet_disable() in this driver happen in preemptible
context.

Change the send() call to use tasklet_disable_in_atomic() which allows
tasklet_disable() to be made sleepable once the remaining atomic context
usage sites are cleaned up.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210309084242.415583839@linutronix.de
2021-03-17 16:34:02 +01:00
Alexey Dobriyan
9cb24ea051 atm: delete include/linux/atm_suni.h
This file has been effectively empty since 2.3.99-pre3 !

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 12:43:10 -07:00
Tong Zhang
4416e98594 atm: idt77252: fix null-ptr-dereference
this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.

fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08 15:16:30 -08:00
Tong Zhang
3153724fc0 atm: uPD98402: fix incorrect allocation
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.

I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08 15:16:30 -08:00
Tong Zhang
a2bd45834e atm: lanai: dont run lanai_dev_close if not open
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the
pci device is disabled. The caller, lanai_init_one(), then tries to run
atm_dev_deregister(). This will subsequently call lanai_dev_close() and
use the already released MMIO area.

To fix this issue, set the lanai->base to NULL if open fail,
and test the flag in lanai_dev_close().

[    8.324153] lanai: lanai_start() failed, err=19
[    8.324819] lanai(itf 0): shutting down interface
[    8.325211] BUG: unable to handle page fault for address: ffffc90000180024
[    8.325781] #PF: supervisor write access in kernel mode
[    8.326215] #PF: error_code(0x0002) - not-present page
[    8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0
[    8.327206] Oops: 0002 [#1] SMP KASAN NOPTI
[    8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12
[    8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[    8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai]
[    8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80
[    8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246
[    8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a
[    8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000
[    8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa
[    8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4
[    8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88
[    8.333077] FS:  00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[    8.333502] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0
[    8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.334932] Call Trace:
[    8.335066]  atm_dev_deregister+0x161/0x1a0 [atm]
[    8.335324]  lanai_init_one.cold+0x20c/0x96d [lanai]
[    8.335594]  ? lanai_send+0x2a0/0x2a0 [lanai]
[    8.335831]  local_pci_probe+0x6f/0xb0
[    8.336039]  pci_device_probe+0x171/0x240
[    8.336255]  ? pci_device_remove+0xe0/0xe0
[    8.336475]  ? kernfs_create_link+0xb6/0x110
[    8.336704]  ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[    8.336983]  really_probe+0x161/0x420
[    8.337181]  driver_probe_device+0x6d/0xd0
[    8.337401]  device_driver_attach+0x82/0x90
[    8.337626]  ? device_driver_attach+0x90/0x90
[    8.337859]  __driver_attach+0x60/0x100
[    8.338065]  ? device_driver_attach+0x90/0x90
[    8.338298]  bus_for_each_dev+0xe1/0x140
[    8.338511]  ? subsys_dev_iter_exit+0x10/0x10
[    8.338745]  ? klist_node_init+0x61/0x80
[    8.338956]  bus_add_driver+0x254/0x2a0
[    8.339164]  driver_register+0xd3/0x150
[    8.339370]  ? 0xffffffffc0028000
[    8.339550]  do_one_initcall+0x84/0x250
[    8.339755]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    8.340076]  ? free_vmap_area_noflush+0x1a5/0x5c0
[    8.340329]  ? unpoison_range+0xf/0x30
[    8.340532]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    8.340806]  ? unpoison_range+0xf/0x30
[    8.341014]  ? unpoison_range+0xf/0x30
[    8.341217]  do_init_module+0xf8/0x350
[    8.341419]  load_module+0x3fe6/0x4340
[    8.341621]  ? vm_unmap_ram+0x1d0/0x1d0
[    8.341826]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    8.342101]  ? module_frob_arch_sections+0x20/0x20
[    8.342358]  ? __do_sys_finit_module+0x108/0x170
[    8.342604]  __do_sys_finit_module+0x108/0x170
[    8.342841]  ? __ia32_sys_init_module+0x40/0x40
[    8.343083]  ? file_open_root+0x200/0x200
[    8.343298]  ? do_sys_open+0x85/0xe0
[    8.343491]  ? filp_open+0x50/0x50
[    8.343675]  ? exit_to_user_mode_prepare+0xfc/0x130
[    8.343935]  do_syscall_64+0x33/0x40
[    8.344132]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    8.344401] RIP: 0033:0x7f08eb887cf7
[    8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[    8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7
[    8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003
[    8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0
[    8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001
[    8.347836] Modules linked in: lanai(+) atm
[    8.348065] CR2: ffffc90000180024
[    8.348244] ---[ end trace 7fdc1c668f2003e5 ]---
[    8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai]
[    8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80
[    8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246
[    8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a
[    8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000
[    8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa
[    8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4
[    8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88
[    8.351918] FS:  00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[    8.352343] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0
[    8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.353958] modprobe (95) used greatest stack depth: 26216 bytes left

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01 13:18:54 -08:00
Tong Zhang
4deb550bc3 atm: eni: dont release is never initialized
label err_eni_release is reachable when eni_start() fail.
In eni_start() it calls dev->phy->start() in the last step, if start()
fail we don't need to call phy->stop(), if start() is never called, we
neither need to call phy->stop(), otherwise null-ptr-deref will happen.

In order to fix this issue, don't call phy->stop() in label err_eni_release

[    4.875714] ==================================================================
[    4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni]
[    4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95
[    4.876778]
[    4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2
[    4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94
[    4.877876] Call Trace:
[    4.878009]  dump_stack+0x7d/0xa3
[    4.878191]  kasan_report.cold+0x10c/0x10e
[    4.878410]  ? __slab_free+0x2f0/0x340
[    4.878612]  ? suni_stop+0x47/0x100 [suni]
[    4.878832]  suni_stop+0x47/0x100 [suni]
[    4.879043]  eni_do_release+0x3b/0x70 [eni]
[    4.879269]  eni_init_one.cold+0x1152/0x1747 [eni]
[    4.879528]  ? _raw_spin_lock_irqsave+0x7b/0xd0
[    4.879768]  ? eni_ioctl+0x270/0x270 [eni]
[    4.879990]  ? __mutex_lock_slowpath+0x10/0x10
[    4.880226]  ? eni_ioctl+0x270/0x270 [eni]
[    4.880448]  local_pci_probe+0x6f/0xb0
[    4.880650]  pci_device_probe+0x171/0x240
[    4.880864]  ? pci_device_remove+0xe0/0xe0
[    4.881086]  ? kernfs_create_link+0xb6/0x110
[    4.881315]  ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[    4.881594]  really_probe+0x161/0x420
[    4.881791]  driver_probe_device+0x6d/0xd0
[    4.882010]  device_driver_attach+0x82/0x90
[    4.882233]  ? device_driver_attach+0x90/0x90
[    4.882465]  __driver_attach+0x60/0x100
[    4.882671]  ? device_driver_attach+0x90/0x90
[    4.882903]  bus_for_each_dev+0xe1/0x140
[    4.883114]  ? subsys_dev_iter_exit+0x10/0x10
[    4.883346]  ? klist_node_init+0x61/0x80
[    4.883557]  bus_add_driver+0x254/0x2a0
[    4.883764]  driver_register+0xd3/0x150
[    4.883971]  ? 0xffffffffc0038000
[    4.884149]  do_one_initcall+0x84/0x250
[    4.884355]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    4.884674]  ? unpoison_range+0xf/0x30
[    4.884875]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.885150]  ? unpoison_range+0xf/0x30
[    4.885352]  ? unpoison_range+0xf/0x30
[    4.885557]  do_init_module+0xf8/0x350
[    4.885760]  load_module+0x3fe6/0x4340
[    4.885960]  ? vm_unmap_ram+0x1d0/0x1d0
[    4.886166]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.886441]  ? module_frob_arch_sections+0x20/0x20
[    4.886697]  ? __do_sys_finit_module+0x108/0x170
[    4.886941]  __do_sys_finit_module+0x108/0x170
[    4.887178]  ? __ia32_sys_init_module+0x40/0x40
[    4.887419]  ? file_open_root+0x200/0x200
[    4.887634]  ? do_sys_open+0x85/0xe0
[    4.887826]  ? filp_open+0x50/0x50
[    4.888009]  ? fpregs_assert_state_consistent+0x4d/0x60
[    4.888287]  ? exit_to_user_mode_prepare+0x2f/0x130
[    4.888547]  do_syscall_64+0x33/0x40
[    4.888739]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    4.889010] RIP: 0033:0x7ff62fcf1cf7
[    4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71
[    4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7
[    4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003
[    4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0
[    4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001
[    4.892439] ==================================================================

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01 13:17:36 -08:00
Tong Zhang
d0a0bbe7b0 atm: idt77252: fix build broken on amd64
idt77252 is broken and wont load on amd64 systems
  modprobe idt77252 shows the following

    idt77252_init: skb->cb is too small (48 < 56)

  Add packed attribute to struct idt77252_skb_prv and struct atm_skb_data
  so that the total size can be <= sizeof(skb->cb)
  Also convert runtime size check to buildtime size check in
  idt77252_init()

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15 12:36:27 -08:00
Dan Carpenter
8df66af5c1 atm: idt77252: call pci_disable_device() on error path
This error path needs to disable the pci device before returning.

Fixes: ede58ef28e ("atm: remove deprecated use of pci api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21 17:34:09 -08:00
Jakub Kicinski
56495a2442 Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19 19:08:46 -08:00