After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <20230525204021.696858-1-u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
Read syscall cannot response to sigals when data_to_read remains at 0
and the while loop cannot break. Check signal_pending in the loop.
Reported-by: Zhen Ni <zhen.ni@easystack.cn>
Message-Id: <20230517085412.367022-1-zhen.ni@easystack.cn>
Signed-off-by: Corey Minyard <minyard@acm.org>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
For both variants (platform and i2c driver) after a successful bind
(i.e. .probe completed without error) driver data is set to a non-NULL
value.
So the return value of i2c_get_clientdata and dev_get_drvdata
respectively are not NULL and so the if blocks are never executed. (And
if you fear they might, they shouldn't return silently and yield a
resource leak.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <20221230124431.202474-1-u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
The ipmi communication is not restored after a specific version of BMC is
upgraded on our server.
The ipmi driver does not respond after printing the following log:
ipmi_ssif: Invalid response getting flags: 1c 1
I found that after entering this branch, ssif_info->ssif_state always
holds SSIF_GETTING_FLAGS and never return to IDLE.
As a result, the driver cannot be loaded, because the driver status is
checked during the unload process and must be IDLE in shutdown_ssif():
while (ssif_info->ssif_state != SSIF_IDLE)
schedule_timeout(1);
The process trigger this problem is:
1. One msg timeout and next msg start send, and call
ssif_set_need_watch().
2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change
ssif_state to SSIF_GETTING_FLAGS.
3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error
message is received, the second branch does not modify the ssif_state.
4. All retry action need IS_SSIF_IDLE() == True. Include retry action in
watch_timeout(), msg_done_handler(). Sending msg does not work either.
SSIF_IDLE is also checked in start_next_msg().
5. The only thing that can be triggered in the SSIF driver is
watch_timeout(), after destory_user(), this timer will stop too.
So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS
and can't send msg, no timer started, can't unload.
We did a comparative test before and after adding this patch, and the
result is effective.
Fixes: 259307074b ("ipmi: Add SMBus interface driver (SSIF)")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20230412074907.80046-1-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in the comment information. Fix it.
Signed-off-by: zipeng zhang <zhangzipeng0@foxmail.com>
Message-Id: <tencent_F0BFF85BC7C1FC84E440A7B7D364D2ED4209@qq.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
register_sysctl_table() is a deprecated compatibility wrapper.
register_sysctl() can do the directory creation for you so just use
that.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Message-Id: <20230302204612.782387-3-mcgrof@kernel.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP_MMIO" to
"select REGMAP_MMIO", which will also set REGMAP.
Fixes: eb994594bc ("ipmi: bt-bmc: Use a regmap for register access")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230226053953.4681-2-rdunlap@infradead.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
'This should be 'retry_time_ms' instead of 'max_retries'.
Fixes: 63c4eb3471 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <0d8670cff2c656e99a832a249e77dc90578f67de.1675591429.git.christophe.jaillet@wanadoo.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI spec has a time (T6) specified between request retries. Add
the handling for that.
Reported by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Xu Panda <xu.panda@zte.com.cn>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Message-Id: <202212051936400309332@zte.com.cn>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <20221118224540.619276-606-uwe@kleine-koenig.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The intf_free() function frees the "intf" pointer so we cannot
dereference it again on the next line.
Fixes: cbb79863fc ("ipmi: Don't allow device module unload when in use")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Message-Id: <Y3M8xa1drZv4CToE@kili>
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The kstrto<something>() functions have been moved from kernel.h to
kstrtox.h.
So, in order to eventually remove <linux/kernel.h> from <linux/watchdog.h>,
include the latter directly in the appropriate files.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <37daa028845d90ee77f1e547121a051a983fec2e.1667647002.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The spec states that the minimum message retry time is 60ms, but it was
set to 20ms. Correct it.
Reported by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The current code provokes some kernel-doc warnings:
drivers/char/ipmi/ipmi_msghandler.c:618: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-Id: <20221025060436.4372-1-liubo03@inspur.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This fixes the following sparse warning:
sparse warnings: (new ones prefixed by >>)
>> drivers/char/ipmi/ssif_bmc.c:254:22: sparse: sparse: invalid assignment: |=
>> drivers/char/ipmi/ssif_bmc.c:254:22: sparse: left side has type restricted __poll_t
>> drivers/char/ipmi/ssif_bmc.c:254:22: sparse: right side has type int
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202210181103.ontD9tRT-lkp@intel.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-Id: <20221024075956.3312552-1-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If you continue to access and send messages at a high frequency (once
every 55s) when the IPMI is disconnected, messages will accumulate in
intf->[hp_]xmit_msg. If it lasts long enough, it takes up a lot of
memory.
The reason is that if IPMI is disconnected, each message will be set to
IDLE after it returns to HOSED through IDLE->ERROR0->HOSED. The next
message goes through the same process when it comes in. This process
needs to wait for IBF_TIMEOUT * (MAX_ERROR_RETRIES + 1) = 55s.
Each message takes 55S to destroy. This results in a continuous increase
in memory.
I find that if I wait 5 seconds after the first message fails, the
status changes to ERROR0 in smi_timeout(). The next message will return
the error code IPMI_NOT_IN_MY_STATE_ERR directly without wait.
This is more in line with our needs.
So instead of setting each message state to IDLE after it reaches the
state HOSED, set state to ERROR0.
After testing, the problem has been solved, no matter how many
consecutive sends, will not cause continuous memory growth. It also
returns to normal immediately after the IPMI is restored.
In addition, the HOSED state should also count as invalid. So the HOSED
is removed from the invalid judgment in start_kcs_transaction().
The verification operations are as follows:
1. Use BPF to record the ipmi_alloc/free_smi_msg().
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
2. Exec `date; time for x in $(seq 1 2); do ipmitool mc info; done`.
3. Record the output of `time` and when free all msgs.
Before:
`time` takes 120s, This is because `ipmitool mc info` send 4 msgs and
waits only 15 seconds for each message. Last msg is free after 440s.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
Oct 05 11:40:55 Attaching 2 probes...
Oct 05 11:41:12 alloc 0xffff9558a05f0c00
Oct 05 11:41:27 alloc 0xffff9558a05f1a00
Oct 05 11:41:42 alloc 0xffff9558a05f0000
Oct 05 11:41:57 alloc 0xffff9558a05f1400
Oct 05 11:42:07 free 0xffff9558a05f0c00
Oct 05 11:42:07 alloc 0xffff9558a05f7000
Oct 05 11:42:22 alloc 0xffff9558a05f2a00
Oct 05 11:42:37 alloc 0xffff9558a05f5a00
Oct 05 11:42:52 alloc 0xffff9558a05f3a00
Oct 05 11:43:02 free 0xffff9558a05f1a00
Oct 05 11:43:57 free 0xffff9558a05f0000
Oct 05 11:44:52 free 0xffff9558a05f1400
Oct 05 11:45:47 free 0xffff9558a05f7000
Oct 05 11:46:42 free 0xffff9558a05f2a00
Oct 05 11:47:37 free 0xffff9558a05f5a00
Oct 05 11:48:32 free 0xffff9558a05f3a00
$ root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do
ipmitool mc info; done
Wed Oct 5 11:41:12 CST 2022
No data available
Get Device ID command failed
No data available
No data available
No valid response received
Get Device ID command failed: Unspecified error
No data available
Get Device ID command failed
No data available
No data available
No valid response received
No data available
Get Device ID command failed
real 1m55.052s
user 0m0.001s
sys 0m0.001s
After:
`time` takes 55s, all msgs is returned and free after 55s.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
Oct 07 16:30:35 Attaching 2 probes...
Oct 07 16:30:45 alloc 0xffff955943aa9800
Oct 07 16:31:00 alloc 0xffff955943aacc00
Oct 07 16:31:15 alloc 0xffff955943aa8c00
Oct 07 16:31:30 alloc 0xffff955943aaf600
Oct 07 16:31:40 free 0xffff955943aa9800
Oct 07 16:31:40 free 0xffff955943aacc00
Oct 07 16:31:40 free 0xffff955943aa8c00
Oct 07 16:31:40 free 0xffff955943aaf600
Oct 07 16:31:40 alloc 0xffff9558ec8f7e00
Oct 07 16:31:40 free 0xffff9558ec8f7e00
Oct 07 16:31:40 alloc 0xffff9558ec8f7800
Oct 07 16:31:40 free 0xffff9558ec8f7800
Oct 07 16:31:40 alloc 0xffff9558ec8f7e00
Oct 07 16:31:40 free 0xffff9558ec8f7e00
Oct 07 16:31:40 alloc 0xffff9558ec8f7800
Oct 07 16:31:40 free 0xffff9558ec8f7800
root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do
ipmitool mc info; done
Fri Oct 7 16:30:45 CST 2022
No data available
Get Device ID command failed
No data available
No data available
No valid response received
Get Device ID command failed: Unspecified error
Get Device ID command failed: 0xd5 Command not supported in present state
Get Device ID command failed: Command not supported in present state
real 0m55.038s
user 0m0.001s
sys 0m0.001s
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221009091811.40240-2-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
After the IPMI disconnect problem, the memory kept rising and we tried
to unload the driver to free the memory. However, only part of the
free memory is recovered after the driver is uninstalled. Using
ebpf to hook free functions, we find that neither ipmi_user nor
ipmi_smi_msg is free, only ipmi_recv_msg is free.
We find that the deliver_smi_err_response call in clean_smi_msgs does
the destroy processing on each message from the xmit_msg queue without
checking the return value and free ipmi_smi_msg.
deliver_smi_err_response is called only at this location. Adding the
free handling has no effect.
To verify, try using ebpf to trace the free function.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv
%p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n",
arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n",
retval);} kprobe:free_smi_msg {printf("free smi %p\n",arg0)}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-4-zhangyuchen.lcr@bytedance.com>
[Fixed the comment above handle_one_recv_msg().]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When fixing the problem mentioned in PATCH1, we also found
the following problem:
If the IPMI is disconnected and in the sending process, the
uninstallation driver will be stuck for a long time.
The main problem is that uninstalling the driver waits for curr_msg to
be sent or HOSED. After stopping tasklet, the only place to trigger the
timeout mechanism is the circular poll in shutdown_smi.
The poll function delays 10us and calls smi_event_handler(smi_info,10).
Smi_event_handler deducts 10us from kcs->ibf_timeout.
But the poll func is followed by schedule_timeout_uninterruptible(1).
The time consumed here is not counted in kcs->ibf_timeout.
So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has
actually passed. The waiting time has increased by more than a
hundredfold.
Now instead of calling poll(). call smi_event_handler() directly and
calculate the elapsed time.
For verification, you can directly use ebpf to check the kcs->
ibf_timeout for each call to kcs_event() when IPMI is disconnected.
Decrement at normal rate before unloading. The decrement rate becomes
very slow after unloading.
$ bpftrace -e 'kprobe:kcs_event {printf("kcs->ibftimeout : %d\n",
*(arg0+584));}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-3-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
The ASPEED KCS devices don't provide a BMC-side interrupt for the host
reading the output data register (ODR). The act of the host reading ODR
clears the output buffer full (OBF) flag in the status register (STR),
informing the BMC it can transmit a subsequent byte.
On the BMC side the KCS client must enable the OBE event *and* perform a
subsequent read of STR anyway to avoid races - the polling provides a
window for the host to read ODR if data was freshly written while
minimising BMC-side latency.
Fixes: 28651e6c42 ("ipmi: kcs_bmc: Allow clients to control KCS IRQ state")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220812144741.240315-1-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The SMBus system interface (SSIF) IPMI BMC driver can be used to perform
in-band IPMI communication with their host in management (BMC) side.
Thanks Dan for the copy_from_user() fix in the link below.
Link: https://lore.kernel.org/linux-arm-kernel/20220310114119.13736-4-quan@os.amperecomputing.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-Id: <20221004093106.1653317-2-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet.
-----BEGIN PGP SIGNATURE-----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=wVwj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Fix a bunch of little problems in IPMI
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet"
* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Remove unused struct watcher_entry
ipmi: kcs: aspeed: Update port address comments
ipmi: Add __init/__exit annotations to module init/exit funcs
ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
ipmi:ipmb: Fix a vague comment and a typo
dt-binding: ipmi: add fallback to npcm845 compatible
ipmi: Fix comment typo
char: ipmi: modify NPCM KCS configuration
dt-bindings: ipmi: Add npcm845 compatible
After commit e86ee2d44b44("ipmi: Rework locking and shutdown for hot remove"),
no one use struct watcher_entry, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20220927133814.98929-1-yuancan@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Remove AST_usrGuide_KCS.pdf as it is no longer maintained.
Add more descriptions as the driver now supports the I/O
address configurations for both the KCS Data and Cmd/Status
interface registers.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Message-Id: <20220920020333.601-1-chiawei_wang@aspeedtech.com>
[I don't like removing documentation, but the document in question
was a personal note by an employee and nothing official and not
necessarily guaranteed to be accurate in the future. So go
ahead and remove it.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The data structure won't be set up to be unregistered, and it can result in
crashes if the register fails.
Signed-off-by: Corey Minyard <minyard@acm.org>
Sending an IPMI response message gets a reponse to the response, but the
comment saying that just said "response response", which is hard to
understand. Also fix an obvious typo.
Reported-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The double `the' is duplicated in line 4360, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20220715054156.6342-1-wangborong@cdjrlc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 00d93611f0 ("ipmi:ipmb: Add the ability to have a separate slave and master device")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220512044445.3102-1-linmq006@gmail.com>
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There were two identical logs in two different places, so you couldn't
tell which one was being logged. Make them unique.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The was it was wouldn't work in some situations, simplify it. What was
there was unnecessary complexity.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Don't hand-initialize the struct here, create a macro to initialize it
so new fields added don't get forgotten in places.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There was a "type" element added to this structure, but some static
values were missed. The default value will be zero, which is correct,
but create an initializer for the type and initialize the type properly
in the initializer to avoid future issues.
Reported-by: Joe Wiese <jwiese@rackspace.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Even though it's not possible to get into the SSIF_GETTING_MESSAGES and
SSIF_GETTING_EVENTS states without a valid message in the msg field,
it's probably best to be defensive here and check and print a log, since
that means something else went wrong.
Also add a default clause to that switch statement to release the lock
and print a log, in case the state variable gets messed up somehow.
Reported-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Message-Id: <20220324171159.544565-1-steve@sk2.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Go through each user and add its message count to a total and print the
total.
It would be nice to have a per-user file, but there's no user sysfs
entity at this point to hang it off of. Probably not worth the effort.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A count of users is kept for each interface, allow it to be viewed.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This way a rogue application can't use up a bunch of memory.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Each user uses memory, we need limits to avoid a rogue program from
running the system out of memory.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
