mirror of
https://github.com/torvalds/linux.git
synced 2024-09-20 23:13:00 +00:00
e61e002a67
45160 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
5256184b61 |
Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to be
stable over a chain of operations by design. This includes a warning
which would be nice to have but it produces false positives due to
the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into idle.
As a result the events of such a CPU might not be processed and
timers go stale.
Cure it by splitting the hotplug operation into a prepare and online
callback. The prepare callback is guaranteed to run on an online and
therefore active CPU. This CPU updates the hierarchy and being online
ensures that there is always at least one migrator active which
handles the modified hierarchy correctly when going idle. The online
callback which runs on the incoming CPU then just marks the CPU
active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on.
-----BEGIN PGP SIGNATURE-----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=G1Lg
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer migration updates from Thomas Gleixner:
"Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to
be stable over a chain of operations by design.
This includes a warning which would be nice to have but it produces
false positives due to the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into
idle. As a result the events of such a CPU might not be processed
and timers go stale.
Cure it by splitting the hotplug operation into a prepare and
online callback. The prepare callback is guaranteed to run on an
online and therefore active CPU. This CPU updates the hierarchy and
being online ensures that there is always at least one migrator
active which handles the modified hierarchy correctly when going
idle. The online callback which runs on the incoming CPU then just
marks the CPU active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on"
* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix grammar in comment
timers/migration: Spare write when nothing changed
timers/migration: Rename childmask by groupmask to make naming more obvious
timers/migration: Read childmask and parent pointer in a single place
timers/migration: Use a single struct for hierarchy walk data
timers/migration: Improve tracing
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
timers/migration: Do not rely always on group->parent
|
||
|
Linus Torvalds
|
1722389b0d |
A lot of networking people were at a conference last week, busy
catching COVID, so relatively short PR. Including fixes from bpf
and netfilter.
Current release - regressions:
- tcp: process the 3rd ACK with sk_socket for TFO and MPTCP
Current release - new code bugs:
- l2tp: protect session IDR and tunnel session list with one lock,
make sure the state is coherent to avoid a warning
- eth: bnxt_en: update xdp_rxq_info in queue restart logic
- eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field
Previous releases - regressions:
- xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
the field reuses previously un-validated pad
Previous releases - always broken:
- tap/tun: drop short frames to prevent crashes later in the stack
- eth: ice: add a per-VF limit on number of FDIR filters
- af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9OsH
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
A lot of networking people were at a conference last week, busy
catching COVID, so relatively short PR.
Current release - regressions:
- tcp: process the 3rd ACK with sk_socket for TFO and MPTCP
Current release - new code bugs:
- l2tp: protect session IDR and tunnel session list with one lock,
make sure the state is coherent to avoid a warning
- eth: bnxt_en: update xdp_rxq_info in queue restart logic
- eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field
Previous releases - regressions:
- xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
the field reuses previously un-validated pad
Previous releases - always broken:
- tap/tun: drop short frames to prevent crashes later in the stack
- eth: ice: add a per-VF limit on number of FDIR filters
- af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"
* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
tun: add missing verification for short frame
tap: add missing verification for short frame
mISDN: Fix a use after free in hfcmulti_tx()
gve: Fix an edge case for TSO skb validity check
bnxt_en: update xdp_rxq_info in queue restart logic
tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
MAINTAINERS: make Breno the netconsole maintainer
MAINTAINERS: Update bonding entry
net: nexthop: Initialize all fields in dumped nexthops
net: stmmac: Correct byte order of perfect_match
selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
tipc: Return non-zero value from tipc_udp_addr2str() on error
netfilter: nft_set_pipapo_avx2: disable softinterrupts
ice: Fix recipe read procedure
ice: Add a per-VF limit on number of FDIR filters
net: bonding: correctly annotate RCU in bond_should_notify_peers()
...
|
||
|
Linus Torvalds
|
8bf100092d |
trivial printk changes for 6.11
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmaiUQcACgkQUqAMR0iA lPITNQ/+KDdmQljKwpuXlqe01F1mG/LFn5i1Y/a8fZVep/OSmihsgnEqnYzBomTq CF22tlrH7r6EZ2D5by1fjno/AG6/BAXvwH8jGDr9jhVNNBsneeVYrtMB1UUslR/e OEFoFKyzpq6VJNmHl5aAM95CEFEkE5uBba4DkJ/hCh3oErc2zP5DRdD9COCkdlIp +LzQa6XsMjwzrWAMAm2vWdBgePCHVKsAVVFUdfmN28FQw3BcFZEgIvN7vPT7Ee3I ESKx/Asb3myb1J7bFvDKnpT9O+7EkU/cpQn+HxjiIFVPqFLX3mfSXzgvfNocuPB0 hkIUzA9Sbu2wa+SE7qU1IwHVZj2N612OPso8lG8cbcic/KaYLpd6Kt7bnJe8kBe7 gFGBVmDjvapilQwWteWJcMs2hBxXuq0Xd+CMcXTMKYcLS8Z+4TVAYA8onssrUq+0 Jye8hW/CvST/P7wazVtuQu1fsKKz3SG+dAaXw9/7fYTGQ2LdRoLUkDhLkwqIURjD j6+pMMuYpxrpeA7yaOD1xLLOKC33OINClgfodjGVHvDlwxsQBhZFchCKsbufYEa1 CxFi8lDcfNVSGuw5x3a6iMqwnqxoeVKpi6eKKgpU81fXnGd4G2NA5jGRMycWmqzX +uUq6Ot1NO4QVK+pT70GhXMt2rQ6UsC1SyWggeFYBhaaqfIGKRk= =89Nl -----END PGP SIGNATURE----- Merge tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - trivial printk changes The bigger "real" printk work is still being discussed. * tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: vsprintf: add missing MODULE_DESCRIPTION() macro printk: Rename console_replay_all() and update context |
||
|
Linus Torvalds
|
b485625078 |
sysctl: treewide: constify the ctl_table argument of proc_handlers
Summary - const qualify struct ctl_table args in proc_handlers: This is a prerequisite to moving the static ctl_table structs into .rodata data which will ensure that proc_handler function pointers cannot be modified. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmahVOcACgkQupfNUreW QU8QdgwAiDZMEQ6psvDfLGQlOvHyp21exZFC/i1OCrCq4BmTu83iYcojIKSaZ0q6 pfR9eYTVhNfAGsV2hQJvvUQPSVNESB/A7Z2zGLVQmZcOerAN17L2C7uA1SkbRBel P3yoMX6wruVCnBgQTcjktoBgpDqaOiqLTSh8Ko512qYOClLf22sCbbk+doiOwMF6 zbzh9bRo+qTuTgW30gwzRNml/lA1/XylSsM/cEFCxsc8k22lCneP+iWKDAfWtsr6 0GL+SvbBTyIEMFFvSw+0MUW30QctxaCYA1pBmn8nmc6eJ2yDly75/r8EWRr7zqDW SrRiXYDAzNcW3tiOdC2FW/J95VX62DiSQporVZ/OvahBKpQKGaLLNjx1EE3qGKIk ggnYiDmIO88ZBHoRbDDK9EdGGqrIZfRx9JeFD3bMOrwT3Ffxw30rwcYpzlOyjFz3 TIUeNthGXoQNRxZfTE+iybotKWcXnxCNe4U1Mvc2liY6+Z0jazDWfs+jV7CiuX1G Xk8jpTCR =JMg4 -----END PGP SIGNATURE----- Merge tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl constification from Joel Granados: "Treewide constification of the ctl_table argument of proc_handlers using a coccinelle script and some manual code formatting fixups. This is a prerequisite to moving the static ctl_table structs into read-only data section which will ensure that proc_handler function pointers cannot be modified" * tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: treewide: constify the ctl_table argument of proc_handlers |
||
|
Linus Torvalds
|
9b21993654 |
kgdb patches for 6.11
Three small changes this cycle:
1. Cleaning up an architecture abstraction that is no longer needed
because all the architectures have converged.
2. Actually use the prompt argument to kdb_position_cursor() instead of
ignoring it (functionally this fix is a nop but that was due to luck
rather than good judgement)
3. Fix a -Wformat-security warning.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Se36
-----END PGP SIGNATURE-----
Merge tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Three small changes this cycle:
- Clean up an architecture abstraction that is no longer needed
because all the architectures have converged.
- Actually use the prompt argument to kdb_position_cursor() instead
of ignoring it (functionally this fix is a nop but that was due to
luck rather than good judgement)
- Fix a -Wformat-security warning"
* tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Get rid of redundant kdb_curr_task()
kdb: Use the passed prompt in kdb_position_cursor()
kdb: address -Wformat-security warnings
|
||
|
Linus Torvalds
|
9cf601e865 |
dma-mapping fix for Linux 6.11
- fix the order of actions in dmam_free_coherent (Lance Richardson) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmahEd4LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPnhQ/9GAD6MEOVrPxBwdR8gKhM/zIBfhsQgMt1+Htl/dIv ytPFDnXP6OCl4bPO7SkGRa92VVVAYBDWH7YnWct/cZc/6Kq4HZsAbWQzxzFVTI+/ acHZuppqXY3iewSd3H+noCx92EuMFypG6FPf82gtftnQgWlQl55putR+5Xh1rlap 2wA566eaLiarN+RC8tCjnpZrNMn+Obx4DuyCNLaQtckHaUVlmN5GgaD5yh2+h+jU RjTAbVhFbVhxeAo0qUVe1bDK2iphyDtgSTeFwCt9OQ5/YaKUQe2wgbL5cpBgJk76 g6BUtiwJ4d+jbR5xxuCJKu7U4PQGZHnOxL3XR5ImEFfQCPGSk4Dqz0VvpINLWfUg UwfysaCdMyqpVEyV2o5+0d7RpNqnvc4EIG/4AL7fYcTkWFLpBs8tz2AeDf1UafiS ZvOaYt6tl3Q6Wa8yNFwSt1/06/60Ngj4UOK10j6vn7oATiVH5uVPo8wrT/v6PYeK mAeQe7QJjWXjWdCQ8Rved9fS6ooh9A+B2GVtQTIK0kIQSkRv3LelLaOW8/L53HUL KiODBe3Cxa3nD0sktqowrXmh33uTsVBiAyFNFeE0C8kG+CBDbHBAUQ4wZVVKK3ni 6Y0+yrSpFF2yeZZVajuOn3jUpGN1Q1f0I1ImNaWN6CHhIL8D75d/4QK/JI925JCe tRY= =0dRz -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.11-2024-07-24' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - fix the order of actions in dmam_free_coherent (Lance Richardson) * tag 'dma-mapping-6.11-2024-07-24' of git://git.infradead.org/users/hch/dma-mapping: dma: fix call order in dmam_free_coherent |
||
Jakub Kicinski
|
f7578df913 |
bpf-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZqIl1AAKCRDbK58LschI g/MdAP9oyZV9/IZ6Y6Z1fWfio0SB+yJGugcwbFjWcEtNrzsqJQEAwipQnemAI4NC HBMfK2a/w7vhAFMXrP/SbkB/gUJJ7QE= =vovf -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-07-25 We've added 14 non-merge commits during the last 8 day(s) which contain a total of 19 files changed, 177 insertions(+), 70 deletions(-). The main changes are: 1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and BPF sockhash. Also add test coverage for this case, from Michal Luczaj. 2) Fix a segmentation issue when downgrading gso_size in the BPF helper bpf_skb_adjust_room(), from Fred Li. 3) Fix a compiler warning in resolve_btfids due to a missing type cast, from Liwei Song. 4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte boundary in the fexit_sleep BPF selftest, from Puranjay Mohan. 5) Fix a xsk regression to require a flag when actuating tx_metadata_len, from Stanislav Fomichev. 6) Fix function prototype BTF dumping in libbpf for prototypes that have no input arguments, from Andrii Nakryiko. 7) Fix stacktrace symbol resolution in perf script for BPF programs containing subprograms, from Hou Tao. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids bpf, events: Use prog to emit ksymbol event for main program selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected() af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash bpftool: Fix typo in usage help libbpf: Fix no-args func prototype BTF dumping syntax MAINTAINERS: Update powerpc BPF JIT maintainers MAINTAINERS: Update email address of Naveen selftests/bpf: fexit_sleep: Fix stack allocation for arm64 ==================== Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Joel Granados
|
78eb4ea25c |
sysctl: treewide: constify the ctl_table argument of proc_handlers
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
||
|
Linus Torvalds
|
ca83c61cb3 |
Kbuild updates for v6.11
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_KALLSYMS
- Enable the warning for symbol reference to .exit.* sections by default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate base
DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
-----BEGIN PGP SIGNATURE-----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=BYu7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
||
|
Linus Torvalds
|
d2d721e2eb |
Livepatching changes for 6.11
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmafyQEACgkQUqAMR0iA lPIb5Q/+Puck/TtP9W7uyFMDi6AQMm2/Ppja12OV0cpzKwvZci81mvANEJDC2gGa Wlg4++WVqeA6UfxsPLqDWDWI46dSHWfbMR5d9c5ZZBWh8byNLznBvgQdV04m0KaT 567gXwRaVc3Rx4q0WkoWYn12FFvZV5IZPJbUuM4hKS1WmDrW5tPKteBoxGVujU5N j9BB3zMHH+cDrgB2+tasUGkEXRLQtesjVrPNQp4lJA535JwnpFk3961+y4cnaAaQ EqrGy/uUVk6Hl/4Q/JgnYRREmDytMMmvxJJx3FIZm6i5xLOY0y1rJ1YF0z7fL+Eu +WJi6Uncwo1mFUz5MvKAg2tIUilbOp3awQwxPdPFXoziF0A1mS+S6qHlz6Y8Kk4N kqgmfIXZeb/K+UCWX6freqqvAg/sJ0JlNIcaGOGZi7+KRwoi8US3eahIAEUxHuis DRnwtF9qI6YRyjfwy3INDc9Atgnhe6O/mcUpAe1TiSHgbgKT8kQgIQUWb1BwurVE Ey1Hpci+gpJyj1MW0f1jE08lqQ1O7EdFTJyxJvgjs1IeGA2Zgc0U2GMemSidh6qZ pqQnEwOfvCdVgR8W4R0Gu8IZYsyCYEawNVHixk2V+GQSdvZsPfJNvnhkqYH/IzUQ yXKBCZVVBwTQW6zkGI6fjeXgjVH2cEL29vDO4ChQsSH4qEZb/GA= =k4I2 -----END PGP SIGNATURE----- Merge tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - show patch->replace flag in sysfs - add or improve few selftests * tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Replace snprintf() with sysfs_emit() selftests/livepatch: Add selftests for "replace" sysfs attribute livepatch: Add "replace" sysfs attribute selftests: livepatch: Test atomic replace against multiple modules selftests/livepatch: define max test-syscall processes |
||
|
Linus Torvalds
|
66ebbdfdeb |
Switch ARM/ARM64 over to the modern per device MSI domains:
This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmaeheUTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYocX4D/wLYD+DQDpA3U1XS8jPNE4vKcmBBNX8 Mj4qdHsY8fK+FhmtLsj8FL3iSTymPtgXzFupXGS+5iFG3LhbW8JWEbqjbowcJ1c8 /4w8sKyyWdCSScrCTrH4A3RrLNDAX3DzSMqqi17sdETuwtN0RJiXgcm/CwRXETmn kVqB7ddalyAR0Z2N/ym1fkuwyBAdeu3cBxMy/BWR6GFae1dAGe8Kr8GsmmuzBTFi DQSmkh6kZntTn9y+K7juXF+1q8InolmHiOOUeoUJachSCyp6nu9W2+S2MVUiuOA2 X1/Ei3eKvkBHFDd7phZnIrVecuNehAQEV6BRMKOYBiDG4lwD6vCbbr9/YF5vBGni tbZAetk9VBpIj0YRVAz7WkLC2JmVbw4znlrDwe8+xeLeDwRXl9f4Xc1Udr0qKgpd 1bNE1zG1z45v5J3OtJLJ4MCYcUCsQgv1CkUlNEdz5+NhXHT+W+oKJor/0WYJ3Qwe iqTEJ9BA1/SzvngwIt/uoMZlEjBl/0/T1UEMJvP/7oEqjl/UAEWGlpKnID3hsDc2 GcIEOJod6hWzyPyeJUI6RpCHy4ZG93WL7Ks+lvzfp381yoDL5/KlveDtSomyuzYF 2xXHUAvw8MAYfJ/CFft/DYme8sBpn1cxAMWdctEiAn0qfS7X1RNZ/RhQ2OXxRw3q tNpc0jEen9m72A== =2adH -----END PGP SIGNATURE----- Merge tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ... |
||
|
Linus Torvalds
|
ac7473a179 |
Updates for the interrupt subsystem:
- Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to expand
any of this for new required functionality.
The new function takes a pointer to a data structure as argument. The
data structure combines all existing parameters and allows for easy
extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization before
the new domain is published, so that concurrent usage sites won't see
a half initialized interrupt domain. Similar problems exist on
teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible workarounds
at the driver level.
- The usual small improvements all over the place
- Drivers
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version to
allow building the latter as a module for multi-platform kernels.
- Enable MSI support for Armada 370XP on platforms which do not support
IPIs.
- The usual small fixes and enhancements all over the place.
-----BEGIN PGP SIGNATURE-----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=QCRH
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
||
Anna-Maria Behnsen
|
f004bf9de0 |
timers/migration: Fix grammar in comment
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-8-757baa7803fe@linutronix.de |
||
|
Anna-Maria Behnsen
|
2367e28e23 |
timers/migration: Spare write when nothing changed
The wakeup value is written unconditionally in tmigr_cpu_new_timer(). When there was no new next timer expiry that needs to be propagated, then the value that was read before is written. This is not required. Move the write to the place where wakeup value is changed changed. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-7-757baa7803fe@linutronix.de |
||
|
Anna-Maria Behnsen
|
835a9a67f5 |
timers/migration: Rename childmask by groupmask to make naming more obvious
childmask in the group reflects the mask that is required to 'reference' this group in the parent. When reading childmask, this might be confusing, as this suggests, that this is the mask of the child of the group. Clarify this by renaming childmask in the tmigr_group and tmc_group by groupmask. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-6-757baa7803fe@linutronix.de |
||
|
Anna-Maria Behnsen
|
d47be58984 |
timers/migration: Read childmask and parent pointer in a single place
Reading the childmask and parent pointer is required when propagating changes through the hierarchy. At the moment this reads are spread all over the place which makes it harder to follow. Move those reads to a single place to keep code clean. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-5-757baa7803fe@linutronix.de |
||
|
Anna-Maria Behnsen
|
3ba111032b |
timers/migration: Use a single struct for hierarchy walk data
Two different structs are defined for propagating data from one to another level when walking the hierarchy. Several struct members exist in both structs which makes generalization harder. Merge those two structs into a single one and use it directly in walk_groups() and the corresponding function pointers instead of introducing pointer casting all over the place. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-4-757baa7803fe@linutronix.de |
||
|
Anna-Maria Behnsen
|
9250674152 |
timers/migration: Improve tracing
Trace points of inactive and active propagation are located at the end of the related functions. The interesting information of those trace points is the updated group state. When trace points are not located directly at the place where group state changed, order of trace points in traces could be confusing. Move inactive and active propagation trace points directly after update of group state values. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-3-757baa7803fe@linutronix.de |
||
|
Anna-Maria Behnsen
|
10a0e6f3d3 |
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
When a CPU comes online the first time, it is possible that a new top level
group will be created. In general all propagation is done from the bottom
to top. This minimizes complexity and prevents possible races. But when a
new top level group is created, the formely top level group needs to be
connected to the new level. This is the only time, when the direction to
propagate changes is changed: the changes are propagated from top (new top
level group) to bottom (formerly top level group).
This introduces two races (see (A) and (B)) as reported by Frederic:
(A) This race happens, when marking the formely top level group as active,
but the last active CPU of the formerly top level group goes idle. Then
it's likely that formerly group is no longer active, but marked
nevertheless as active in new top level group:
[GRP0:0]
migrator = 0
active = 0
nextevt = KTIME_MAX
/ \
0 1 .. 7
active idle
0) Hierarchy has for now only 8 CPUs and CPU 0 is the only active CPU.
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
nextevt = KTIME_MAX
\
[GRP0:0] [GRP0:1]
migrator = 0 migrator = TMIGR_NONE
active = 0 active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
active idle !online
1) CPU 8 is booting and creates a new group in first level GRP0:1 and
therefore also a new top group GRP1:0. For now the setup code proceeded
only until the connected between GRP0:1 to the new top group. The
connection between CPU8 and GRP0:1 is not yet established and CPU 8 is
still !online.
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0 migrator = TMIGR_NONE
active = 0 active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
active idle !online
2) Setup code now connects GRP0:0 to GRP1:0 and observes while in
tmigr_connect_child_parent() that GRP0:0 is not TMIGR_NONE. So it
prepares to call tmigr_active_up() on it. It hasn't done it yet.
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = NONE active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
idle idle !online
3) CPU 0 goes idle. Since GRP0:0->parent has been updated by CPU 8 with
GRP0:0->lock held, CPU 0 observes GRP1:0 after calling
tmigr_update_events() and it propagates the change to the top (no change
there and no wakeup programmed since there is no timer).
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = NONE active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
idle idle !online
4) Now the setup code finally calls tmigr_active_up() to and sets GRP0:0
active in GRP1:0
[GRP1:0]
migrator = GRP0:0
active = GRP0:0, GRP0:1
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = 8
active = NONE active = 8
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \ |
0 1 .. 7 8
idle idle active
5) Now CPU 8 is connected with GRP0:1 and CPU 8 calls tmigr_active_up() out
of tmigr_cpu_online().
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T8
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = NONE active = NONE
nextevt = KTIME_MAX nextevt = T8
/ \ |
0 1 .. 7 8
idle idle idle
5) CPU 8 goes idle with a timer T8 and relies on GRP0:0 as the migrator.
But it's not really active, so T8 gets ignored.
--> The update which is done in third step is not noticed by setup code. So
a wrong migrator is set to top level group and a timer could get
ignored.
(B) Reading group->parent and group->childmask when an hierarchy update is
ongoing and reaches the formerly top level group is racy as those values
could be inconsistent. (The notation of migrator and active now slightly
changes in contrast to the above example, as now the childmasks are used.)
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
\
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = 0x00 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 0 childmask= 1
parent = NULL parent = GRP1:0
/ \
0 1 .. 7 8
idle idle !online
childmask=1
1) Hierarchy has 8 CPUs. CPU 8 is at the moment in the process of onlining
but did not yet connect GRP0:0 to GRP1:0.
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = 0x00 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 0 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
idle idle !online
childmask=1
2) Setup code (running on CPU 8) now connects GRP0:0 to GRP1:0, updates
parent pointer of GRP0:0 and ...
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0x01 migrator = TMIGR_NONE
active = 0x01 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 0 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
active idle !online
childmask=1
tmigr_walk.childmask = 0
3) ... CPU 0 comes active in the same time. As migrator in GRP0:0 was
TMIGR_NONE, childmask of GRP0:0 is stored in update propagation data
structure tmigr_walk (as update of childmask is not yet
visible/updated). And now ...
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0x01 migrator = TMIGR_NONE
active = 0x01 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 2 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
active idle !online
childmask=1
tmigr_walk.childmask = 0
4) ... childmask of GRP0:0 is updated by CPU 8 (still part of setup
code).
[GRP1:0]
migrator = 0x00
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0x01 migrator = TMIGR_NONE
active = 0x01 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 2 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
active idle !online
childmask=1
tmigr_walk.childmask = 0
5) CPU 0 sees the connection to GRP1:0 and now propagates active state to
GRP1:0 but with childmask = 0 as stored in propagation data structure.
--> Now GRP1:0 always has a migrator as 0x00 != TMIGR_NONE and for all CPUs
it looks like GRP1:0 is always active.
To prevent those races, the setup of the hierarchy is moved into the
cpuhotplug prepare callback. The prepare callback is not executed by the
CPU which will come online, it is executed by the CPU which prepares
onlining of the other CPU. This CPU is active while it is connecting the
formerly top level to the new one. This prevents from (A) to happen and it
also prevents from any further walk above the formerly top level until that
active CPU becomes inactive, releasing the new ->parent and ->childmask
updates to be visible by any subsequent walk up above the formerly top
level hierarchy. This prevents from (B) to happen. The direction for the
updates is now forced to look like "from bottom to top".
However if the active CPU prevents from tmigr_cpu_(in)active() to walk up
with the update not-or-half visible, nothing prevents walking up to the new
top with a 0 childmask in tmigr_handle_remote_up() or
tmigr_requires_handle_remote_up() if the active CPU doing the prepare is
not the migrator. But then it looks fine because:
* tmigr_check_migrator() should just return false
* The migrator is active and should eventually observe the new childmask
at some point in a future tick.
Split setup functionality of online callback into the cpuhotplug prepare
callback and setup hotplug state. Change init call into early_initcall() to
make sure an already active CPU prepares everything for newly upcoming
CPUs. Reorder the code, that all prepare related functions are close to
each other and online and offline callbacks are also close together.
Fixes:
|
||
|
Anna-Maria Behnsen
|
facd40aa5c |
timers/migration: Do not rely always on group->parent
When reading group->parent without holding the group lock it is racy
against CPUs coming online the first time and thereby creating another
level of the hierarchy. This is not a problem when this value is read once
to decide whether to abort a propagation or not. The worst outcome is an
unnecessary/early CPU wake up. But it is racy when reading it several times
during a single 'action' (like activation, deactivation, checking for
remote timer expiry,...) and relying on the consitency of this value
without holding the lock. This happens at the moment e.g. in
tmigr_inactive_up() which is also calling tmigr_udpate_events(). Code relys
on group->parent not to change during this 'action'.
Update parent struct member description to explain the above only
once. Remove parent pointer checks when they are not mandatory (like update
of data->childmask). Remove a warning, which would be nice but the trigger
of this warning is not reliable and add expand the data structure member
description instead. Expand a comment, why it is safe to rely on parent
pointer here (inside hierarchy update).
Fixes:
|
||
|
Linus Torvalds
|
527eff227d |
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code and has taught bcachefs to use the new more generic implementation. - Yury Norov's series "Cleanup cpumask.h inclusion in core headers" reworks the cpumask and nodemask headers to make things generally more rational. - Kuan-Wei Chiu has sent along some maintenance work against our sorting library code in the series "lib/sort: Optimizations and cleanups". - More library maintainance work from Christophe Jaillet in the series "Remove usage of the deprecated ida_simple_xx() API". - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the series "nilfs2: eliminate the call to inode_attach_wb()". - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB command error". - Plus the usual shower of singleton patches all over the place. Please see the relevant changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2GvwAKCRDdBJ7gKXxA jlf/AP48xP5ilIHbtpAKm2z+MvGuTxJQ5VSC0UXFacuCbc93lAEA+Yo+vOVRmh6j fQF2nVKyKLYfSz7yqmCyAaHWohIYLgg= =Stxz -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - In the series "treewide: Refactor heap related implementation", Kuan-Wei Chiu has significantly reworked the min_heap library code and has taught bcachefs to use the new more generic implementation. - Yury Norov's series "Cleanup cpumask.h inclusion in core headers" reworks the cpumask and nodemask headers to make things generally more rational. - Kuan-Wei Chiu has sent along some maintenance work against our sorting library code in the series "lib/sort: Optimizations and cleanups". - More library maintainance work from Christophe Jaillet in the series "Remove usage of the deprecated ida_simple_xx() API". - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the series "nilfs2: eliminate the call to inode_attach_wb()". - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB command error". - Plus the usual shower of singleton patches all over the place. Please see the relevant changelogs for details. * tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits) ia64: scrub ia64 from poison.h watchdog/perf: properly initialize the turbo mode timestamp and rearm counter tsacct: replace strncpy() with strscpy() lib/bch.c: use swap() to improve code test_bpf: convert comma to semicolon init/modpost: conditionally check section mismatch to __meminit* init: remove unused __MEMINIT* macros nilfs2: Constify struct kobj_type nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro math: rational: add missing MODULE_DESCRIPTION() macro lib/zlib: add missing MODULE_DESCRIPTION() macro fs: ufs: add MODULE_DESCRIPTION() lib/rbtree.c: fix the example typo ocfs2: add bounds checking to ocfs2_check_dir_entry() fs: add kernel-doc comments to ocfs2_prepare_orphan_dir() coredump: simplify zap_process() selftests/fpu: add missing MODULE_DESCRIPTION() macro compiler.h: simplify data_race() macro build-id: require program headers to be right after ELF header resource: add missing MODULE_DESCRIPTION() ... |
||
|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
Jann Horn
|
64e166099b |
kallsyms: get rid of code for absolute kallsyms
Commit
|
||
|
Linus Torvalds
|
3f386cb8ee |
pci-v6.11-changes
-----BEGIN PGP SIGNATURE-----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=vw2i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
|
||
|
Linus Torvalds
|
aba9753c06 |
TTY/Serial updates for 6.11-rc1
Here is a small set of tty and serial driver updates for 6.11-rc1. Not much happened this cycle, unlike the previous kernel release which had lots of "excitement" in this part of the kernel. Included in here are the following changes: - dt binding updates for new platforms - 8250 driver updates - various small serial driver fixes and updates - printk/console naming and matching attempt #2 (was reverted for 6.10-final, should be good to go this time around, acked by the relevant maintainers). All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppbCQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymV1ACeIY5kgipqY7w4d3/7PcpKMiftrisAn0hr6csj Gan+k3cuVGlasGkaQ5/B =35VK -----END PGP SIGNATURE----- Merge tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.11-rc1. Not much happened this cycle, unlike the previous kernel release which had lots of "excitement" in this part of the kernel. Included in here are the following changes: - dt binding updates for new platforms - 8250 driver updates - various small serial driver fixes and updates - printk/console naming and matching attempt #2 (was reverted for 6.10-final, should be good to go this time around, acked by the relevant maintainers). All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits) Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports serial: core: Add serial_base_match_and_update_preferred_console() printk: Add match_devname_and_update_preferred_console() serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT dt-bindings: serial: sc16is7xx: add reset-gpios dt-bindings: serial: vt8500-uart: convert to json-schema serial: 8250_platform: Explicitly show we initialise ISA ports only once tty: add missing MODULE_DESCRIPTION() macros dt-bindings: serial: mediatek,uart: add MT7988 serial: sh-sci: Add support for RZ/V2H(P) SoC dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names' dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts serial: 8250_dw: Use reset array API to get resets dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC serial: 8250: Extract platform driver serial: 8250: Extract RSA bits serial: imx: stop casting struct uart_port to struct imx_port ... |
||
|
Linus Torvalds
|
afd81d914f |
dma-mapping updates for Linux 6.11
- reduce duplicate swiotlb pool lookups (Michael Kelley) - minor small fixes (Yicong Yang, Yang Li) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmaZ+C0LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPtUw/9FZr0azAzx1E5nqDNfa5sisqoPZUFKcHYBYmjhcgL 9NvDKbKqriRBt8fAMtjGpQqUfpIytfa4p0BGLYnzYKJ8Im+MqC9KYq7lhoNVQGO3 iz8T8clT9TPoVDkiMn/LXlf6dqE0SQtcSh4TJ1c+aTFFlez5jXClFu376rcbdewM n+nyGL93uaCeRpeQlywyBsUdpu9NnWAJUYi/OszWSTlX/1ucG5kD9kNQ4sOFL0S/ WszylOCIuur9EweIvMgPa5X5yCUsr/n95EthbIQRiZq/TSkLpJ3DkTk3VYaaKLsJ imq5Q6dqOnPplL22X6GgvXEDYd1OYzYSvbB93HcxuGnIIYLvdFMV+McCTkwL7XJV v9fDNsx8Wn7cS+6OpT0YxfTFvzHXFAzRTqVoqA/lCWo8eaclzUKM3qOoIQxjl1Wh 1IDoHUhiH0m0ecS+ZzljjDrn39RzU6+5XJiJzCmzYlqL/9f0SumTCsNrEmF3W6l9 GmuP2Q49Rbh+Ru+oyx3KGlBS9DQxTB+heBnjkwigtAiwoO8Z2V9Vwg/a2Lzl3RkN vDaHqEo6f8gAc/QlonOjN9UfuR5U8bxGUps1zw9O0CeTDqSDXmJKvkddfkBSAY7s bIW+sObA5yRrPuwz4ALykw3h1UJXdZNJIEYjin3CJIHr3K0DZADWXXSXCSao16kC MXU= =PzrU -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.11-2024-07-19' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - reduce duplicate swiotlb pool lookups (Michael Kelley) - minor small fixes (Yicong Yang, Yang Li) * tag 'dma-mapping-6.11-2024-07-19' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix kernel-doc description for swiotlb_del_transient swiotlb: reduce swiotlb pool lookups dma-mapping: benchmark: Don't starve others when doing the test |
||
Hou Tao
|
0be9ae5486 |
bpf, events: Use prog to emit ksymbol event for main program
Since commit |
||
Lance Richardson
|
28e8b7406d |
dma: fix call order in dmam_free_coherent
dmam_free_coherent() frees a DMA allocation, which makes the
freed vaddr available for reuse, then calls devres_destroy()
to remove and free the data structure used to track the DMA
allocation. Between the two calls, it is possible for a
concurrent task to make an allocation with the same vaddr
and add it to the devres list.
If this happens, there will be two entries in the devres list
with the same vaddr and devres_destroy() can free the wrong
entry, triggering the WARN_ON() in dmam_match.
Fix by destroying the devres entry before freeing the DMA
allocation.
Tested:
kokonut //net/encryption
http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03
Fixes:
|
||
|
Linus Torvalds
|
720261cfc7 |
bcachefs changes for 6.11-rc1 (version 2)
Additional fixes on top of the original 6.11 pull request: - undefined behaviour fixes, originally noted as breaking userspace LTO builds - fix a spurious warning in fsck_err, reported by Marcin - fix an integer overflow on trans->nr_updates, also reported by Marcin; this broke during deletion of highly fragmented indirect extents - Add comments for lockdep functions ====== - Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped This splits out the accounting of dirty sectors and stripe sectors in alloc keys; this lets us see stripe buckets that still have unstriped data in them. This is needed for ensuring that erasure coding is working correctly, as well as completing stripe creation after a crash. - Metadata version 1.9: Disk accounting rewrite The previous disk accounting scheme relied heavily on percpu counters that were also sharded by outstanding journal buffer; it was fast but not extensible or scalable, and meant that all accounting counters were recorded in every journal entry. The new disk accounting scheme stores accounting as normal btree keys; updates are deltas until they are flushed by the btree write buffer. This means we have no practical limit on the number of counters, and a new tagged union format that's easy to extend. We now have counters for compression type/ratio, per-snapshot-id usage, per-btree-id usage, and pending rebalance work. - Self healing on read IO/checksum error data is now automatically rewritten if we get a read error and then a successful retry - Mount API conversion (thanks to Thomas Bertschinger) - Better lockdep coverage Previously, btree node locks were tracked individually by lockdep, like any other lock. But we may take _many_ btree node locks simultaneously, we easily blow through the limit of 48 locks that lockdep can track, leading to lockdep turning itself off. Tracking each btree node lock individually isn't really necessary since we have our own cycle detector for deadlock avoidance and centralized tracking of btree node locks, so we now have a single lockdep_map in btree_trans for "any btree nodes are locked". - some more small incremental work towards online check_allocations - lots more debugging improvements, fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmaZmVYACgkQE6szbY3K bnayLBAAr/RB75neEVzNqzE/qLoz9HBfPs7NrGNZg3bLzie9BvcEKGf3VUs2mm83 6qN/bCJRBhd2vdMcFvIrYYqvD+F2qFFFrBjTzY20toReCwO6q5o8Ihfzv+uSu1qn Lg/6AbwwDwHPgSLcFM6yVfNsNBpOZ4tru7xble5/89RGp5uhbU38tsFwkUcngN/t 4GWjtUYC+rFZaJSbt+wtGtM++nSURhMu1rxbR3MnVLT3JNW0wiG+FnRymCRQOYwx eslI6wP3JArTKMvACJqXTDivmjUPNdvsJ26LW6b5KBLi411OgV219ek0mJlkc5gl lOOZ5LPmPqn0BxsIdqOd+/OGOpvYkfWEyDj6/46K8KKFt+i++vCTzqIeL06HGQFS oCZajoHseLTlWPZTnoi3/KPWkKSJyaROrvFPSHT5/9sJfeeFt88hNSMP9g4+S4GI QSXK70GzEVjxr7YzUZwZUmRGWHt7YcS/qkTKJZRkLwUbr2BnrKEJhOa0t/i3RopN glFP/hP3dObTcWUF4xH90htfD2E/wHbP7nPwNCL6367n18Uj4TJD09vtM8xHsXSR YXECCjfskVDHAQJw/aV5jF1NpaeSW6g/bILi8tQhvRpfzLLvsaVGxA1xp5v+VZEQ w3WBepPofEE1EaVfKNeHCiE7STAnSVbWYWTatmjPdqVCyT7C9S0= =tnhh -----END PGP SIGNATURE----- Merge tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs Pull bcachefs updates from Kent Overstreet: - Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped This splits out the accounting of dirty sectors and stripe sectors in alloc keys; this lets us see stripe buckets that still have unstriped data in them. This is needed for ensuring that erasure coding is working correctly, as well as completing stripe creation after a crash. - Metadata version 1.9: Disk accounting rewrite The previous disk accounting scheme relied heavily on percpu counters that were also sharded by outstanding journal buffer; it was fast but not extensible or scalable, and meant that all accounting counters were recorded in every journal entry. The new disk accounting scheme stores accounting as normal btree keys; updates are deltas until they are flushed by the btree write buffer. This means we have no practical limit on the number of counters, and a new tagged union format that's easy to extend. We now have counters for compression type/ratio, per-snapshot-id usage, per-btree-id usage, and pending rebalance work. - Self healing on read IO/checksum error Data is now automatically rewritten if we get a read error and then a successful retry - Mount API conversion (thanks to Thomas Bertschinger) - Better lockdep coverage Previously, btree node locks were tracked individually by lockdep, like any other lock. But we may take _many_ btree node locks simultaneously, we easily blow through the limit of 48 locks that lockdep can track, leading to lockdep turning itself off. Tracking each btree node lock individually isn't really necessary since we have our own cycle detector for deadlock avoidance and centralized tracking of btree node locks, so we now have a single lockdep_map in btree_trans for "any btree nodes are locked". - Some more small incremental work towards online check_allocations - Lots more debugging improvements - Fixes, including: - undefined behaviour fixes, originally noted as breaking userspace LTO builds - fix a spurious warning in fsck_err, reported by Marcin - fix an integer overflow on trans->nr_updates, also reported by Marcin; this broke during deletion of highly fragmented indirect extents * tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs: (120 commits) lockdep: Add comments for lockdep_set_no{validate,track}_class() bcachefs: Fix integer overflow on trans->nr_updates bcachefs: silence silly kdoc warning bcachefs: Fix fsck warning about btree_trans not passed to fsck error bcachefs: Add an error message for insufficient rw journal devs bcachefs: varint: Avoid left-shift of a negative value bcachefs: darray: Don't pass NULL to memcpy() bcachefs: Kill bch2_assert_btree_nodes_not_locked() bcachefs: Rename BCH_WRITE_DONE -> BCH_WRITE_SUBMITTED bcachefs: __bch2_read(): call trans_begin() on every loop iter bcachefs: show none if label is not set bcachefs: drop packed, aligned from bkey_inode_buf bcachefs: btree node scan: fall back to comparing by journal seq bcachefs: Add lockdep support for btree node locks lockdep: lockdep_set_notrack_class() bcachefs: Improve copygc_wait_to_text() bcachefs: Convert clock code to u64s bcachefs: Improve startup message bcachefs: Self healing on read IO error bcachefs: Make read_only a mount option again, but hidden ... |
||
|
Linus Torvalds
|
76d9b92e68 |
slab updates for 6.11
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmaXl0kACgkQu+CwddJF
iJrOlgf+N/G7BmgoW2CBF7mKsvCYs+pX3xeBuxPtsuq4FD386nsPFMN8gWAYLG3q
ZU1z1S+0M8LhTg6/G9jMYLHt2Y7WhYbhFTjTHmULJkuhMDTUP9CRYy4XZ+hdPtHF
30ezSdJQF9x/XxCSaaRVK1s+SMVHFg5xAOHKpfkNSamcMz9g+ZkYyPBr10/VoKd0
JqwhW7r6hrlvWAiqY3QKCOvohIWglgvBUnNjUGMh1cUkOE2aYLYHklhRwICKgA6z
p/2BUXiAEWUtgBkUrizwm/pdhJXLs0pOeYarVZP1v83tQMxyrc6XLNnqhvxP3DPW
31thF5Rf9I8WaWTczXhxsAwFjqO3KQ==
=4uf9
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
|
||
|
Linus Torvalds
|
70045bfc4c |
ftrace: Rewrite of function graph tracer
Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT 7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8= =umuf -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ... |
||
|
Linus Torvalds
|
2fd4130e53 |
tracing: Trivial updates for 6.11
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about.
Changing it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved.
The prev_comm was being saved along with the other next fields, and the
next_comm was being saved along with the other prev fields. This is just
a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL.
The allocation can happen in irq_work context, but luckily, the size
was by default so large, it was never triggered. But in case it ever is,
use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbRchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt9qAQCM/FNa1mRRlnCxMD+SrcGJmW4j/VvE
5c+QY5ezCYxGjwEA5tYwXttoZ1WHGRWCvuRSnkWidE1K0HpRyITo3BVzaQU=
=Sw4T
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Trivial updates for 6.11:
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about. Changing
it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved
The prev_comm was being saved along with the other next fields, and
the next_comm was being saved along with the other prev fields.
This is just a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL
The allocation can happen in irq_work context, but luckily, the
size was by default so large, it was never triggered. But in case
it ever is, use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors"
* tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/pid_list: Change gfp flags in pid_list_fill_irq()
tracing/sched: sched_switch: place prev_comm and next_comm in right order
rtla/osnoise: set the default threshold to 1us
tracing: Fix trace_pid_list_free() kernel-doc
|
||
|
Linus Torvalds
|
91bd008d4e |
Probes updates for v6.11:
Uprobes:
- x86/shstk: Make return uprobe work with shadow stack.
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster. This
syscall is automatically used from user-space trampolines which are
generated by the uretprobe. If this syscall is used by normal
user program, it will cause SIGILL. Note that this is currently only
implemented on x86_64.
(This also has 2 fixes for adjusting the syscall number to avoid conflict
with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending uretprobe.
This corrects the uretprobe's trampoline address in the stacktrace with
correct return address.
- selftests/x86: Add a return uprobe with shadow stack test.
- selftests/bpf: Add uretprobe syscall related tests.
. test case for register integrity check.
. test case with register changing case.
. test case for uretprobe syscall without uprobes (expected to be failed).
. test case for uretprobe with shadow stack.
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but to
clarify who maintains and reviews the uprobes.
Kprobes:
- tracing/kprobes: Test case cleanups. Replace redundant WARN_ON_ONCE() +
pr_warn() with WARN_ONCE() and remove unnecessary code from selftest.
- tracing/kprobes: Add symbol counting check when module loads. This
checks the uniqueness of the probed symbol on modules. The same check
has already done for kernel symbols.
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWYxwbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bsUgH/3JcSzDZujQWCZ1f4fJn
QecvTFSYcCl6ck8+/3wm4EsgeCXIFOyPnoPc7k2Gm+l6Dlk1DKGV6wV4tuKFUq9X
9mplcwoVA0Ln+EX9zv9v4s99yUGxcU9xjgC9XT7J52SvqYncPIi6dR0Z9wlJBmyd
Bx3cZk+wSzCYaoqYngI2fKlzsEcYgDIP999fQPRi0HGzNZujc4xeJyjCTC/48yWO
9kreRQq6wFdgRQTwMcR/fKPDKIGZQCU8jkXv5crVV5K3rNaBcwBmCJJMP8PzPU0V
UQ0+8RZK+Qk8SBwXcMNVRqm/efTderob4IYxP8OBe5wjAIE7+vu8r6sqwxRIS54M
Cyg=
=DRSr
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
|
||
Thomas Gleixner
|
2fdda02a87 |
genirq/msi: Move msi_device_data to core
Now that the platform MSI hack is gone, nothing needs to know about struct msi_device_data outside of the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142236.003295177@linutronix.de |
||
|
Thomas Gleixner
|
e989424899 |
genirq/msi: Remove platform MSI leftovers
No more users! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240623142235.943295676@linutronix.de |
||
|
Thomas Gleixner
|
f944ffcbc2 |
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
For systems on which the performance counter can expire early due to turbo
modes the watchdog handler has a safety net in place which validates that
since the last watchdog event there has at least 4/5th of the watchdog
period elapsed.
This works reliably only after the first watchdog event because the per
CPU variable which holds the timestamp of the last event is never
initialized.
So a first spurious event will validate against a timestamp of 0 which
results in a delta which is likely to be way over the 4/5 threshold of the
period. As this might happen before the first watchdog hrtimer event
increments the watchdog counter, this can lead to false positives.
Fix this by initializing the timestamp before enabling the hardware event.
Reset the rearm counter as well, as that might be non zero after the
watchdog was disabled and reenabled.
Link: https://lkml.kernel.org/r/87frsfu15a.ffs@tglx
Fixes:
|
||
Vlastimil Babka
|
53dabce265 |
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
This mostly reverts commit
|
||
|
Vlastimil Babka
|
a7526fe8b9 |
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
Patch series "revert unconditional slab and page allocator fault injection calls". These two patches largely revert commits that added function call overhead into slab and page allocation hotpaths and that cannot be currently disabled even though related CONFIG_ options do exist. A much more involved solution that can keep the callsites always existing but hidden behind a static key if unused, is possible [1] and can be pursued by anyone who believes it's necessary. Meanwhile the fact the should_failslab() error injection is already not functional on kernels built with current gcc without anyone noticing [2], and lukewarm response to [1] suggests the need is not there. I believe it will be more fair to have the state after this series as a baseline for possible further optimisation, instead of the unconditional overhead. For example a possible compromise for anyone who's fine with an empty function call overhead but not the full CONFIG_FAILSLAB / CONFIG_FAIL_PAGE_ALLOC overhead is to reuse patch 1 from [1] but insert a static key check only inside should_failslab() and should_fail_alloc_page() before performing the more expensive checks. [1] https://lore.kernel.org/all/20240620-fault-injection-statickeys-v2-0-e23947d3d84b@suse.cz/#t [2] https://github.com/bpftrace/bpftrace/issues/3258 This patch (of 2): This mostly reverts commit |
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
f8d22a3195 |
linux_kselftest-kunit-6.11-rc1
This KUnit next update for Linux 6.11-rc1 consists of:
-- adds vm_mmap() allocation resource manager
-- converts usercopy kselftest to KUnit
-- disables usercopy testing on !CONFIG_MMU
-- adds MODULE_DESCRIPTION() to core, list, and usercopy tests
-- adds tests for assertion formatting functions - assert.c
-- introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
-- fixes KUNIT_ASSERT_STRNEQ comments to make it clear that it is
an assertion
-- renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
-----BEGIN PGP SIGNATURE-----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=nnFR
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- add vm_mmap() allocation resource manager
- convert usercopy kselftest to KUnit
- disable usercopy testing on !CONFIG_MMU
- add MODULE_DESCRIPTION() to core, list, and usercopy tests
- add tests for assertion formatting functions - assert.c
- introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
- fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an
assertion
- rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
* tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
kunit: executor: Simplify string allocation handling
kunit/usercopy: Add missing MODULE_DESCRIPTION()
kunit/usercopy: Disable testing on !CONFIG_MMU
usercopy: Convert test_user_copy to KUnit test
kunit: test: Add vm_mmap() allocation resource manager
list: test: add the missing MODULE_DESCRIPTION() macro
kunit: add missing MODULE_DESCRIPTION() macros to core modules
list: test: remove unused struct 'klist_test_struct'
kunit: Cover 'assert.c' with tests
|
||
|
Linus Torvalds
|
576a997c63 |
Performance events changes for v6.11:
- Intel PT support enhancements & fixes - Fix leaked SIGTRAP events - Improve and fix the Intel uncore driver - Add support for Intel HBM and CXL uncore counters - Add Intel Lake and Arrow Lake support - AMD uncore driver fixes - Make SIGTRAP and __perf_pending_irq() work on RT - Micro-optimizations - Misc cleanups and fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmaWjncRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iZyg//TSafjCK4N9fyXrPdPqf8L7ntX5uYf0rd uVZpEo/+VGvuFhznHnZIV2DLetvuwYZcUWszCqQMYfokGGi6WI1/k4MeZkSpN5QE p5mFk6gW3cmpHT9bECg7mKQH+w7Qna/b6mnA0HYTFxPGmQKdQDl1/S+ZsgWedxpC 4V3re7/FzenFVS45DwSMPi9s7uZzZhVhTSgb4XLy+0Da4S0iRULItBa8HT8HmqE5 v5aQlw3mmwKPUWvyPMi3Sw6RRWK3C+n5ZxWswSYoLSM3dsp1ZD+YYqtOv2GqAx8v JoL0SOnGnNCfxGHh0kz5D2hztDvq61Enotih2gz7HxvdWh2DasNp4yS1USGQhu5h VJnKNA0TfOUaYqWFVj0EgRVhDX79lMwSHTkR1DZd4vM2GDigHeRPh0zGSn2w/koV oCRxFfBoktHBnX0Te1NE2BhojbuKp25vTGK6GriVcHt/RNpuz6hTxsjdJzHCAlVX M349l0EpUJafvfaIN9zF22uw22J8P9y9JYqI6ebkUIKiuoT9LuafVYhQupSE9H4u IqlozPCTNw6eAQcUo03gkl3n+SY/DZH6eU2ycKgEp3r7TDGYbJPwxY1BgOHbwi4U lySM07leso2accSVAz7GDMI3ejj6Sx64asWS1FSwbajDflouaIK2jtey+1IOdXfv hHY65tomV8U= =gguT -----END PGP SIGNATURE----- Merge tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull performance events updates from Ingo Molnar: - Intel PT support enhancements & fixes - Fix leaked SIGTRAP events - Improve and fix the Intel uncore driver - Add support for Intel HBM and CXL uncore counters - Add Intel Lake and Arrow Lake support - AMD uncore driver fixes - Make SIGTRAP and __perf_pending_irq() work on RT - Micro-optimizations - Misc cleanups and fixes * tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) perf/x86/intel: Add a distinct name for Granite Rapids perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR perf: Split __perf_pending_irq() out of perf_pending_irq() perf: Don't disable preemption in perf_pending_task(). perf: Move swevent_htable::recursion into task_struct. perf: Shrink the size of the recursion counter. perf: Enqueue SIGTRAP always via task_work. task_work: Add TWA_NMI_CURRENT as an additional notify mode. perf: Move irq_work_queue() where the event is prepared. perf: Fix event leak upon exec and file release perf: Fix event leak upon exit task_work: Introduce task_work_cancel() again task_work: s/task_work_cancel()/task_work_cancel_func()/ perf/x86/amd/uncore: Fix DF and UMC domain identification perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable perf/x86/intel: Support Perfmon MSRs aliasing perf/x86/intel: Support PERFEVTSEL extension perf/x86: Add config_mask to represent EVENTSEL bitmask ... |
||
|
Linus Torvalds
|
4a996d90b9 |
Scheduler changes for v6.11:
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS.
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones.
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lLab
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
* tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Update MAINTAINERS and CREDITS
sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks
sched/psi: Optimise psi_group_change a bit
sched/core: Drop spinlocks on contention iff kernel is preemptible
sched/core: Move preempt_model_*() helpers from sched.h to preempt.h
sched/balance: Skip unnecessary updates to idle load balancer's flags
idle: Remove stale RCU comment
sched/headers: Move struct pre-declarations to the beginning of the header
sched/core: Clean up kernel/sched/sched.h a bit
sched/core: Simplify prefetch_curr_exec_start()
sched: Fix spelling in comments
sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c
|
||
|
Linus Torvalds
|
151647ab58 |
Locking changes for v6.11:
- Jump label fixes, including a perf events fix that originally
manifested as jump label failures, but was a serialization bug
at the usage site.
- Mark down_write*() helpers as __always_inline, to improve
WCHAN debuggability.
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T1KT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Jump label fixes, including a perf events fix that originally
manifested as jump label failures, but was a serialization bug at the
usage site
- Mark down_write*() helpers as __always_inline, to improve WCHAN
debuggability
- Misc cleanups and fixes
* tag 'locking-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_write_common() and inlined callers
jump_label: Simplify and clarify static_key_fast_inc_cpus_locked()
jump_label: Clarify condition in static_key_fast_inc_not_disabled()
jump_label: Fix concurrency issues in static_key_slow_dec()
perf/x86: Serialize set_attr_rdpmc()
cleanup: Standardize the header guard define's name
|
||
|
Linus Torvalds
|
f8a8b94d06 |
sysctl changes for 6.11-rc1
Summary
* Remove "->procname == NULL" check when iterating through sysctl table arrays
Removing sentinels in ctl_table arrays reduces the build time size and
runtime memory consumed by ~64 bytes per array. With all ctl_table
sentinels gone, the additional check for ->procname == NULL that worked in
tandem with the ARRAY_SIZE to calculate the size of the ctl_table arrays is
no longer needed and has been removed. The sysctl register functions now
returns an error if a sentinel is used.
* Preparation patches for sysctl constification
Constifying ctl_table structs prevents the modification of proc_handler
function pointers as they would reside in .rodata. The ctl_table arguments
in sysctl utility functions are const qualified in preparation for a future
treewide proc_handler argument constification commit.
* Misc fixes
Increase robustness of set_ownership by providing sane default ownership
values in case the callee doesn't set them. Bound check proc_dou8vec_minmax
to avoid loading buggy modules and give sysctl testing module a name to
avoid compiler complaints.
Testing
* This got push to linux-next in v6.10-rc2, so it has had more than a month
of testing
-----BEGIN PGP SIGNATURE-----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=bs2G
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove "->procname == NULL" check when iterating through sysctl table
arrays
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. With all
ctl_table sentinels gone, the additional check for ->procname == NULL
that worked in tandem with the ARRAY_SIZE to calculate the size of
the ctl_table arrays is no longer needed and has been removed. The
sysctl register functions now returns an error if a sentinel is used.
- Preparation patches for sysctl constification
Constifying ctl_table structs prevents the modification of
proc_handler function pointers as they would reside in .rodata. The
ctl_table arguments in sysctl utility functions are const qualified
in preparation for a future treewide proc_handler argument
constification commit.
- Misc fixes
Increase robustness of set_ownership by providing sane default
ownership values in case the callee doesn't set them. Bound check
proc_dou8vec_minmax to avoid loading buggy modules and give sysctl
testing module a name to avoid compiler complaints.
* tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Warn on an empty procname element
sysctl: Remove ctl_table sentinel code comments
sysctl: Remove "child" sysctl code comments
sysctl: Remove superfluous empty allocations from sysctl internals
sysctl: Replace nr_entries with ctl_table_size in new_links
sysctl: Remove check for sentinel element in ctl_table arrays
mm profiling: Remove superfluous sentinel element from ctl_table
locking: Remove superfluous sentinel element from kern_lockdep_table
sysctl: Add module description to sysctl-testing
sysctl: constify ctl_table arguments of utility function
utsname: constify ctl_table arguments of utility function
sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array
sysctl: always initialize i_uid/i_gid
|
||
|
Linus Torvalds
|
1ca995edf8 |
seccomp updates for v6.11-rc1
- interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin) - Update selftests to check for expected NOTIF_RECV exits (Andrei Vagin) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVTOkACgkQiXL039xt wCayUA//fJTZUq+idihdKMql9SEwYh0uIJQpGOxxBEesUksZUM4alTCswzmheLFL q9BxlWWJJfUsp3djeZK+0vnDv3izaR+LfA1JPEJf64ImbympbEenVXK0ZkmVrTqg bNAlD5c/LVpzYtB7cnOaglq18uUja6/E+EQvNYz5NLHrIhYYCieJZIiFATkHQ9Lj 3Wq3g9FWEa5pZxpKbEI3UA2HllADnmHeb/Z78Zdvyue5lOOvsBIheQfL4m0pW38x xgBWNglIg7b+X+YgwYSv8w50Lhn4SJVtIynWnwzBz19qFJRQL7oJRj1zyFHZPCwZ ajHVIj5LOuts/BYxSiGzczxVqZaAqeOyCY5e8G+Mjk5ZD5kLYznbbcrIFIUIaHpx rpRD/TVVwJ3PHsOIpWHwrXKgoKnbe/0n8lJT+Ehnm/2lLrlGyZj9hLyl6/+JsizE dGIWgE2emykYI+52IRRYSZaw4hLb+CU52d1vd5a35wUk1ie5fcVGZAWnaul23x0I maQtXcyB6tYuhX3oPnxoxFVqGvCKGi3Tc5N+Vg4JR/RzTy2H7fZ02DRZq8Vs0QST EgO3cpCD3035qxkK6ivaV4ebPJjkL158D/+uFyne+PWQlSfrmXJvhfggPFA+Oqtb y8PTUV73+HxDiruXbGZ7MD8C7d+ZvGI/D+xheohYrijhivcXxcc= =tlFN -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin) - Update selftests to check for expected NOTIF_RECV exits (Andrei Vagin) * tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: check that a zombie leader doesn't affect others selftests/seccomp: add test for NOTIF_RECV and unused filters seccomp: release task filters when the task exits seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited |
||
|
Linus Torvalds
|
f83e38fc9f |
xen: branch for v6.11-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZpS2TQAKCRCAXGG7T9hj vjryAQDy08vSiCNYnO4K0AXO9KhCLsXMpbdevTE0yHdtSW/IwQD/eOmrntgBArA4 PfQanbzM3Rj+h6p1zsfvW98DgmFrfAQ= =tG6C -----END PGP SIGNATURE----- Merge tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - some trivial cleanups - a fix for the Xen timer - add boot time selectable debug capability to the Xen multicall handling - two fixes for the recently added Xen irqfd handling * tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove deprecated xen_nopvspin boot parameter x86/xen: eliminate some private header files x86/xen: make some functions static xen: make multicall debug boot time selectable xen/arm: Convert comma to semicolon xen: privcmd: Fix possible access to a freed kirqfd instance xen: privcmd: Switch from mutex to spinlock for irqfds xen: add missing MODULE_DESCRIPTION() macros x86/xen: Convert comma to semicolon x86/xen/time: Reduce Xen timer tick xen/manage: Constify struct shutdown_handler |
||
|
Linus Torvalds
|
d80f2996b8 |
asm-generic updates for 6.11
Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVB1cACgkQYKtH/8kJ UicMqxAAnYKOxfjoMIhYYK6bl126wg/vIcDcjIR9cNWH21Nhn3qxn11ZXau3S7xv 3l/HreEhyEQr4gC2a70IlXyHUadYOlrk+83OURrunWk1oKPmZlMKcfPVbtp8GL7x PUNXQfwM1XZLveKwufY24hoZdwKC+Y/5WLc1t0ReznJuAqgeO2rM9W5dnV5bAfCp he3F5hFcr196Dz3/GJjJIWrY+cbwfmZWsNtj1vFTL5/r/LuCu8HTkqhsGj8tE5BJ NGVEEXbp5eaVTCIGqJWhnuZcsnKN9kM51M7CtdwWf8OTckUVuJap5OsDVKQkWkGl bLPbd2jhDltph0sah51hAIvv4WdkThW76u9FRW7KR3fo7ra67eF7l5j7wc1lE2JB GwLJ1X56Bxe1GhvvNTlDmb7DrnlP/DMPuRv3Z6xyH6l8iZ2pMGlnAxuw6Bs1s6Y5 WSs36ZpnS0ctgjfx37ZITsZSvbKFPpQFJP4siwS8aRNv/NFALNNdFyOCY5lNzspZ 0dxwjn6/7UpHE4MKh6/hvCg2QwupXXBTRytibw+75/rOsR+EYlmtuONtyq2sLUHe ktJ5pg+8XuZm27+wLffuluzmY7sv2F8OU4cTYeM60Ynmc6pRzwUY6/VhG52S1/mU Ua4VgYIpzOtlLrYmz5QTWIZpdSFSVbIc/3pLriD6hn4Mvg+BwdA= =XOhL -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl |
||
|
Linus Torvalds
|
98896d8795 |
- Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
- Add support to be able to kexec TDX guests. For that
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a new
kernel
- Cleanup, readjust and massage related code
-----BEGIN PGP SIGNATURE-----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=k+T+
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
|
||
|
Linus Torvalds
|
b3c0eccb48 |
gpio updates for v6.11-rc1
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more info
on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core to using
a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
hardware and driving tests of the in-kernel GPIO API from user-space over
debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with regards to
reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop tempting
people to use it
- document the preference for using pread() for reading edge events in the
sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to specify
a number of callbacks callers can use to be notified about irqs being
requested and released
-----BEGIN PGP SIGNATURE-----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=kK88
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
||
|
Linus Torvalds
|
d8764c1931 |
workqueue: Fixes for v6.11-rc1
cpus_read_lock() is dropped from workqueue creation path but there were still remaining lockdep_assert_cpus_held() triggering spurious lockdep failures. Remove them. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZpW6Zw4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGWLmAQCKp0zrzmJYfsU7KYFFKyUy1PukIe8NZ2kaqNcX 7FyDZwD6A5k6SZfS/efXWYEwbQZo0MCOS5V1/M7KjqGR/ZeIEgc= =7t+F -----END PGP SIGNATURE----- Merge tag 'wq-for-6.11-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "cpus_read_lock() was dropped from workqueue creation path but there were still remaining lockdep_assert_cpus_held() triggering spurious lockdep failures. Remove them" * tag 'wq-for-6.11-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Remove unneeded lockdep_assert_cpus_held() |