Address the below kernel doc warning:
Documentation/gpu/amdgpu/display/display-manager:134:
drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:101.
Declaration is '.. c:struct:: mpcc_blnd_cfg'.
Documentation/gpu/amdgpu/display/display-manager:146:
drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:3.
Declaration is '.. c:enum:: mpcc_alpha_blend_mode'.
To address the above warnings, this commit uses the 'no-identifiers'
option in the dcn-blocks to avoid duplication with the previous use of
this function doc in the display-manager file. Finally, replaces the
deprecated ':function:' in favor of ':identifiers:'.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dchubbub.h and hubp.h do not have any meaningful documentation; for
this reason, this commit removes those files from the dcn-blocks
documentation.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building the kernel-doc, it has the following complaints:
Documentation/gpu/amdgpu/display/dcn-blocks:23:
drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:3.
Declaration is '.. c:struct:: surface_flip_registers'.
Documentation/gpu/amdgpu/display/dcn-blocks:35:
drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:3.
Declaration is '.. c:struct:: surface_flip_registers'.
This error happened due to a copy-and-paste where the same file path was
duplicated multiple times to a different set of blocks. This commit
addresses this issue by using the correct file path.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit reduces, but does not fix, all the occurrences and some of
the documentation warnings related to the 'no structured comments.' This
was caused by the wrong use of the ':export:' option in the DCN
kernel-doc, so this commit drops the usage of those options.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building the kernel-doc, it complains with the below warning:
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
This warning was caused by the wrong use of the ':export:' and the lack
of function documentation in the file pointed under the ':internal:'.
This commit addresses those issues by relocating the overview
documentation to the correct C file, removing the ':export:' options,
and adding two simple kernel-doc to ensure that ':internal:' does not
have any warning.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/dri-devel/20240715085918.68f5ecc9@canb.auug.org.au/
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add "Series" to MI200 and MI300 to clarify that they represent the
series of cards, and to more closely match the product information
materials. This also matches other entries in this list
Also correct a typo in the MI300 codename (Vangaram->Vanjaram)
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZmqkZAAKCRDj7w1vZxhR
xUUeAP9ZuOvD8dGBFvR95yXQpsoaxyrC37zsckCo87SWRsyg3QEAmxmzdhgsGzKX
lXd3KsF/i1nOPflG9QeMj/lfroE28ww=
=k2mC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-06-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613-cicada-of-infinite-unity-0955ca@houat
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZlhUKAAKCRAnX84Zoj2+
dgHoAYDTpShgXFXnlnMtqZr+ZuShcjcwiqzwM4qNWdtyji9MONtJJU3ZQnGlnXbI
ZU+oZP0Bf0PyT0/8bf+rmZBJ1UdAxt2IQaLkP1tTHOad4E+KlcL5n1opzMi160mB
EZSm9f7aNw==
=bZPt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
The i915 driver has a property to force the RGB range of an HDMI output.
The vc4 driver then implemented the same property with the same
semantics. KWin has support for it, and a PR for mutter is also there to
support it.
Both drivers implementing the same property with the same semantics,
plus the userspace having support for it, is proof enough that it's
pretty much a de-facto standard now and we can provide helpers for it.
Let's plumb it into the newly created HDMI connector.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-18-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The Broadcast RGB property has been documented as three separate entries
so far, each with a different set of values.
The first one is pretty much the generic one: it's used by i915 and vc4,
and is the one used by all the compositors.
The second one is used by the gma500 driver, and is a subset of the
first one: it can have the values "Full" or "Limited 16:235", but lack
the "Automatic" value.
The third one however isn't used by any driver and documents the values
"off", "auto" and "on".
It's unclear where the last one comes from. It was first documented in
commit 6c6a3996f2 ("Documentation: drm: describing drm properties
exposed by various drivers") which adds a number of properties used by
drivers, but without mentioning which driver was using what property.
Grepping at the 6c6a3996f2 commit however, it looks like no driver is
actually using it, and a quick look at the entire kernel history doesn't
show any match either.
At the time though, gma500 had an "audio" property used right next to
Broadcast RGB that did have the "off", "auto" and "on" values in the
same order.
As such, it was probably a copy/paste or scripting error back then, and
there's never been such property used in the kernel.
Either way, it certainly hasn't been used in a decade or two so we can
just get rid of it.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-17-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Print the accumulated runtime for client when printing fdinfo.
Each time a query is done it first does 2 things:
1) loop through all the exec queues for the current client and
accumulate the runtime, per engine class. CTX_TIMESTAMP is used for
that, being read from the context image.
2) Read a "GPU timestamp" that can be used for considering "how much GPU
time has passed" and that has the same unit/refclock as the one
recording the runtime. RING_TIMESTAMP is used for that via MMIO.
Since for all current platforms RING_TIMESTAMP follows the same
refclock, just read it once, using any first engine available.
This is exported to userspace as 2 numbers in fdinfo:
drm-cycles-<class>: <RUNTIME>
drm-total-cycles-<class>: <TIMESTAMP>
Userspace is expected to collect at least 2 samples, which allows to
know the client engine busyness as per:
RUNTIME1 - RUNTIME0
busyness = ---------------------
T1 - T0
Since drm-cycles-<class> always starts at 0, it's also possible to know
if and engine was ever used by a client.
It's expected that userspace will read any 2 samples every few seconds.
Given the update frequency of the counters involved and that
CTX_TIMESTAMP is 32-bits, the counter for each exec_queue can wrap
around (assuming 100% utilization) after ~200s. The wraparound is not
perceived by userspace since it's just accumulated for all the
exec_queues in a 64-bit counter) but the measurement will not be
accurate if the samples are too far apart.
This could be mitigated by adding a workqueue to accumulate the counters
every so often, but it's additional complexity for something that is
done already by userspace every few seconds in tools like gputop (from
igt), htop, nvtop, etc, with none of them really defaulting to 1 sample
per minute or more.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add documentation about the newly added pm_policy node in sysfs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current mipi_dsi_*_write_seq() macros are non-intutitive because
they contain a hidden "return" statement that will return out of the
_caller_ of the macro. Let's mark them as deprecated and instead
introduce some new macros that are more intuitive.
These new macros are less optimal when an error occurs but should
behave more optimally when there is no error. Specifically these new
macros cause smaller code to get generated and the code size savings
(less to fetch from RAM, less cache space used, less RAM used) are
important. Since the error case isn't something we need to optimize
for and these new macros are easier to understand and more flexible,
they should be used.
After converting to use these new functions, one example shows some
nice savings while also being easier to understand.
$ scripts/bloat-o-meter \
...after/panel-novatek-nt36672e.ko \
...ctx/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988)
Function old new delta
nt36672e_1080x2408_60hz_init 6236 5248 -988
Total: Before=10651, After=9663, chg -9.28%
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
The function descriptions are optional and have not yet been added to
the DMC wakelock code, so we shouldn't try to use it. Since this is a
regression, remove the kernel-doc entry for DMC wakelocks for now.
The proper documentation will be added in a future patch.
Fixes: 765425f598 ("drm/i915/display: add support for DMC wakelocks")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510090502.667556-1-luciano.coelho@intel.com
The driver date serves no useful purpose, because it's hardly ever
updated. The information is misleading at best.
As described in Documentation/gpu/drm-internals.rst:
The driver date, formatted as YYYYMMDD, is meant to identify the date
of the latest modification to the driver. However, as most drivers
fail to update it, its value is mostly useless. The DRM core prints it
to the kernel log at initialization time and passes it to userspace
through the DRM_IOCTL_VERSION ioctl.
Stop printing the driver date at init, and start returning the empty
string "" as driver date through the DRM_IOCTL_VERSION ioctl.
The driver date initialization in drivers and the struct drm_driver date
member can be removed in follow-up.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429164336.1406480-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rewrite some docs that are not up-to-date any longer. Remove the TODO
item for fbdev-generic conversion, as the helper has been replaced. Make
documentation for DMA, SHMEM and TTM emulation available.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-44-tzimmermann@suse.de
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and
change the symbol infix from _generic_ to _ttm_. Link the source file
into TTM helpers, so that it is only build if TTM-based drivers have
been selected. Select DRM_TTM_HELPER for loongson.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de
drm-misc-next for v6.10-rc1:
UAPI Changes:
- Add SIZE_HINTS property for cursor planes.
Cross-subsystem Changes:
Core Changes:
- Document the requirements and expectations of adding new
driver-specific properties.
- Assorted small fixes to ttm.
- More Kconfig fixes.
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- Fixes for drm-panic, and option to test it.
- Assorted small fixes and updates to edid.
- Add drm_crtc_vblank_crtc and use it in vkms, nouveau.
Driver Changes:
- Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi.
- Add drm panic to simpledrm, mgag200, imx, ast.
- Use dev_err_probe in bridge/panel drivers.
- Add Innolux G121X1-L03, LG sw43408 panels.
- Use struct drm_edid in i915 bios parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
=JvZN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-04-17-1' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes (DRM):
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
# E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
# bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
# 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
# 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
# ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
# 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
# =JvZN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.
Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.
The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.
BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This module displays a user friendly message when a kernel panic
occurs. It currently doesn't contain any debug information,
but that can be added later.
v2
* Use get_scanout_buffer() instead of the drm client API.
(Thomas Zimmermann)
* Add the panic reason to the panic message (Nerdopolis)
* Add an exclamation mark (Nerdopolis)
v3
* Rework the drawing functions, to write the pixels line by line and
to use the drm conversion helper to support other formats.
(Thomas Zimmermann)
v4
* Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann)
* Remove the default y to DRM_PANIC config option (Thomas Zimmermann)
* Add foreground/background color config option
* Fix the bottom lines not painted if the framebuffer height
is not a multiple of the font height.
* Automatically register the device to drm_panic, if the function
get_scanout_buffer exists. (Thomas Zimmermann)
v5
* Change the drawing API, use drm_fb_blit_from_r1() to draw the font.
* Also add drm_fb_fill() to fill area with background color.
* Add draw_pixel_xy() API for drivers that can't provide a linear buffer.
* Add a flush() callback for drivers that needs to synchronize the buffer.
* Add a void *private field, so drivers can pass private data to
draw_pixel_xy() and flush().
v6
* Fix sparse warning for panic_msg and logo.
v7
* Add select DRM_KMS_HELPER for the color conversion functions.
v8
* Register directly each plane to the panic notifier (Sima)
* Add raw_spinlock to properly handle concurrency (Sima)
* Register plane instead of device, to avoid looping through plane
list, and simplify code.
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
* Removed the draw_pixel_xy() API, will see later if it can be added back.
v9
* Revert to using get_scanout_buffer() (Sima)
* Move get_scanout_buffer() and panic_flush() to the plane helper
functions (Thomas Zimmermann)
* Register all planes with get_scanout_buffer() to the panic notifier
* Use drm_panic_lock() to protect against race (Sima)
v10
* Move blit and fill functions back in drm_panic (Thomas Zimmermann).
* Simplify the text drawing functions.
* Use kmsg_dumper instead of panic_notifier (Sima).
v12
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
* Better indent struct drm_scanout_buffer declaration. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-3-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When extending support for a driver-specific KMS property to additional
drivers, we should apply all the requirements for new properties and
make sure the semantics are the same and documented.
v2: devs of the driver which introduced property shall help and ack
Signed-off-by: Sebastian Wick <sebastian.wick@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410122008.38207-1-sebastian.wick@redhat.com
The path to GPU documentation is Documentation/gpu
rather than Documentation/GPU
This appears to have been introduced by commit ba162ae749
("Documentation/gpu: Introduce a simple contribution list for display code")
Flagged by make htmldocs.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Covers GPU page fault debugging and adds a reference
to umr.
v2: update client ids to include SQC/G
v3: Remove duplicate text
v4: add umr documentation link, fix typo
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI IDs for XEHPSDV were never added and platform always marked with
force_probe. Drop what's not used and rename some places to either be
xehp or dg2, depending on the platform/IP checks.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Debugfs isn't always available in production builds that try to squeeze
every single byte out of the kernel image, but we still need a way to
toggle the timestamp and cycle counter registers so that jobs can be
profiled for fdinfo's drm engine and cycle calculations.
Drop the debugfs knob and replace it with a sysfs file that accomplishes
the same functionality, and document its ABI in a separate file.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306015819.822128-2-adrian.larumbe@collabora.com
Panthor follows the lead of other recently submitted drivers with
ioctls allowing us to support modern Vulkan features, like sparse memory
binding:
- Pretty standard GEM management ioctls (BO_CREATE and BO_MMAP_OFFSET),
with the 'exclusive-VM' bit to speed-up BO reservation on job submission
- VM management ioctls (VM_CREATE, VM_DESTROY and VM_BIND). The VM_BIND
ioctl is loosely based on the Xe model, and can handle both
asynchronous and synchronous requests
- GPU execution context creation/destruction, tiler heap context creation
and job submission. Those ioctls reflect how the hardware/scheduler
works and are thus driver specific.
We also have a way to expose IO regions, such that the usermode driver
can directly access specific/well-isolate registers, like the
LATEST_FLUSH register used to implement cache-flush reduction.
This uAPI intentionally keeps usermode queues out of the scope, which
explains why doorbell registers and command stream ring-buffers are not
directly exposed to userspace.
v6:
- Add Maxime's and Heiko's acks
v5:
- Fix typo
- Add Liviu's R-b
v4:
- Add a VM_GET_STATE ioctl
- Fix doc
- Expose the CORE_FEATURES register so we can deal with variants in the
UMD
- Add Steve's R-b
v3:
- Add the concept of sync-only VM operation
- Fix support for 32-bit userspace
- Rework drm_panthor_vm_create to pass the user VA size instead of
the kernel VA size (suggested by Robin Murphy)
- Typo fixes
- Explicitly cast enums with top bit set to avoid compiler warnings in
-pedantic mode.
- Drop property core_group_count as it can be easily calculated by the
number of bits set in l2_present.
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-2-boris.brezillon@collabora.com
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXXUhsACgkQaA3BHVML
eiNVFQf+IoOXCACGkWEVmVaen50pjEfLq0OjSGHdbTJqhc9wU7Q/kPC+jEpZLyqo
OUMdXlA55BeLX52O+bvLordDPNETUsYH1QX2BYKDwcNIrvj8ISXcvdbnDcbVmttD
ZUaaBgZ0g2M6sZQvTVU88/1RtaG64+zuk9VA1dPlh6WnBtXBUeXNtD6YQjH6xY+a
MjZpB5VafwJTmQxy7qJ4yTLX291Ao8J2YZK8cCSyEr3FQKkAx9sJyp3hPurVIjLM
f1y1rtoHhxUV/OVg4M559fp6F6tUkFauv4qu5VUvmPPihJTaU0eSQxir0za4VJ4e
Jr2GOkju0oRRpKfjd0aKvaoWhl+MNg==
=aaTQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
Clarify the documentation in preparation for updated
helpers which check the handle count as well as whether
a dma-buf has been attached.
Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.keonig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
This commit adds a contribution list for display under the kernel
documentation with some first suggestions. It also drops an old TODO
list from the display folder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces some explanation about the display team
validation.
Changes since V1:
- Remove unprecise information about the DC process for now, can be
added later on.
- Jani: Fix bullets
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce OPP as part of the kernel documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a kernel-doc entry for the MPC block. Since it enabled
the kernel-doc to parse some of the documentation in the mpc.h file,
fixing some of the comments was required.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces basic DPP information and the struct scan for
code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the documentation to extract code documentation from dchubbub.h
file.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create the HUBP documentation page and add the doc references to extract
the HUBP code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These have been released now, so add them to the documentation.
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The file has already been deleted as the tasks were completed.
However the index reference was missed behind.
fixes a doc build warning:
Documentation/gpu/rfc/index.rst:35: WARNING: toctree contains
reference to nonexisting document 'gpu/rfc/xe'
Fixes: d11dc7aa98 ("drm/doc/rfc: Remove Xe's pre-merge plan")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116220331.145607-1-rodrigo.vivi@intel.com
Add two articles on LWN about the Linux graphics stack to DRM's
list of external references. The articles document the graphics
output as a whole, including the kernel side.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115113908.25897-1-tzimmermann@suse.de
