Commit Graph

1059979 Commits

Author SHA1 Message Date
Lad Prabhakar
e3b27e2f56 serial: pmac_zilog: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:49 +01:00
Lad Prabhakar
fc67c91329 serial: bcm63xx: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:49 +01:00
Lad Prabhakar
1129a63e3a serial: ar933x: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:49 +01:00
Lad Prabhakar
f63f1ddb5c serial: vt8500: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:49 +01:00
Lad Prabhakar
60302276ca serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:49 +01:00
Lad Prabhakar
6050efac12 serial: pxa: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:49 +01:00
Lad Prabhakar
5b68061983 serial: meson: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:48 +01:00
Lad Prabhakar
c195438f1e serial: 8250_bcm7271: Propagate error codes from brcmuart_probe()
In case of failures brcmuart_probe() always returned -ENODEV, this
isn't correct for example platform_get_irq_byname() may return
-EPROBE_DEFER to handle such cases propagate error codes in
brcmuart_probe() in case of failures.

Fixes: 41a469482d ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:48 +01:00
Lad Prabhakar
56c8b1c10e serial: 8250_bcm7271: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:48 +01:00
Lad Prabhakar
257538544d serial: altera: Use platform_get_irq_optional() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211224142917.6966-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:48 +01:00
Biju Das
a359101c7c dt-bindings: serial: renesas,sci: Document RZ/V2L SoC
Add SCI binding documentation for Renesas RZ/V2L SoC. No driver changes
are required as generic compatible string "renesas,sci" will be used as
a fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221094717.16187-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:26:10 +01:00
Biju Das
b0c86a6083 dt-bindings: serial: renesas,scif: Document RZ/V2L SoC
Add SCIF binding documentation for Renesas RZ/V2L SoC. SCIF block on RZ/V2L
is identical to one found on the RZ/G2L SoC. No driver changes are required
as RZ/G2L compatible string "renesas,scif-r9a07g044" will be used as a
fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221094717.16187-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:25:44 +01:00
Muhammad Usama Anjum
cb559bb974 serial: lantiq: store and compare return status correctly
platform_get_irq() returns signed status. It should be stored and
compared as signed value before storing to unsigned variable. Implicit
conversion from signed to unsigned and then comparison with less than
zero is wrong as unsigned value can never be less than zero.

Fixes: f087f01ca2 ("serial: lantiq: Use platform_get_irq() to get the interrupt")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/YcIf7+oSWWn34ND6@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:23:46 +01:00
Lukas Wunner
b4a29b9480 serial: 8250: Move Alpha-specific quirk out of the core
struct uart_8250_port contains mcr_mask and mcr_force members whose
sole purpose is to work around an Alpha-specific quirk.  This code
doesn't belong in the core where it is executed by everyone else,
so move it to a proper ->set_mctrl callback which is used on the
affected Alpha machine only.

The quirk was introduced in January 1995:
https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/diff/drivers/char/serial.c?h=1.1.83

The members in struct uart_8250_port were added in 2002:
https://git.kernel.org/history/history/c/4524aad27854

The quirk applies to non-PCI Alphas and arch/alpha/Kconfig specifies
"select FORCE_PCI if !ALPHA_JENSEN".  So apparently the only affected
machine is the EISA-based Jensen that Linus was working on back then:
https://lore.kernel.org/all/CAHk-=wj1JWZ3sCrGz16nxEj7=0O+srMg6Ah3iPTDXSPKEws_SA@mail.gmail.com/

Up until now the quirk is not applied unless CONFIG_PCI is disabled.
If users forget to do that or run a generic Alpha kernel, the serial
ports aren't usable on Jensen.  Avoid by confining the quirk to
CONFIG_ALPHA_JENSEN instead of !CONFIG_PCI.  On generic Alpha kernels,
auto-detect at runtime whether the quirk needs to be applied.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/b83d069cb516549b8a5420e097bb6bdd806f36fc.1640695609.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:23:44 +01:00
Lukas Wunner
d3b3404df3 serial: Fix incorrect rs485 polarity on uart open
Commit a6845e1e1b ("serial: core: Consider rs485 settings to drive
RTS") sought to deassert RTS when opening an rs485-enabled uart port.
That way, the transceiver does not occupy the bus until it transmits
data.

Unfortunately, the commit mixed up the logic and *asserted* RTS instead
of *deasserting* it:

The commit amended uart_port_dtr_rts(), which raises DTR and RTS when
opening an rs232 port.  "Raising" actually means lowering the signal
that's coming out of the uart, because an rs232 transceiver not only
changes a signal's voltage level, it also *inverts* the signal.  See
the simplified schematic in the MAX232 datasheet for an example:
https://www.ti.com/lit/ds/symlink/max232.pdf

So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl
and that results in the signal being driven low.

In contrast to rs232, the signal level for rs485 Transmit Enable is the
identity, not the inversion:  If the transceiver expects a "high" RTS
signal for Transmit Enable, the signal coming out of the uart must also
be high, so TIOCM_RTS must be *cleared* in port->mctrl.

The commit did the exact opposite, but it's easy to see why given the
confusing semantics of rs232 and rs485.  Fix it.

Fixes: a6845e1e1b ("serial: core: Consider rs485 settings to drive RTS")
Cc: stable@vger.kernel.org # v4.14+
Cc: Rafael Gago Castano <rgc@hms.se>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:21:02 +01:00
Wander Lairson Costa
5021d709b3 tty: serial: Use fifo in 8250 console driver
Note: I am using a small test app + driver located at [0] for the
problem description. serco is a driver whose write function dispatches
to the serial controller. sertest is a user-mode app that writes n bytes
to the serial console using the serco driver.

While investigating a bug in the RHEL kernel, I noticed that the serial
console throughput is way below the configured speed of 115200 bps in
a HP Proliant DL380 Gen9. I was expecting something above 10KB/s, but
I got 2.5KB/s.

$ time ./sertest -n 2500 /tmp/serco

real    0m0.997s
user    0m0.000s
sys     0m0.997s

With the help of the function tracer, I then noticed the serial
controller was taking around 410us seconds to dispatch one single byte:

$ trace-cmd record -p function_graph -g serial8250_console_write \
   ./sertest -n 1 /tmp/serco

$ trace-cmd report

            |  serial8250_console_write() {
 0.384 us   |    _raw_spin_lock_irqsave();
 1.836 us   |    io_serial_in();
 1.667 us   |    io_serial_out();
            |    uart_console_write() {
            |      serial8250_console_putchar() {
            |        wait_for_xmitr() {
 1.870 us   |          io_serial_in();
 2.238 us   |        }
 1.737 us   |        io_serial_out();
 4.318 us   |      }
 4.675 us   |    }
            |    wait_for_xmitr() {
 1.635 us   |      io_serial_in();
            |      __const_udelay() {
 1.125 us   |        delay_tsc();
 1.429 us   |      }
...
...
...
 1.683 us   |      io_serial_in();
            |      __const_udelay() {
 1.248 us   |        delay_tsc();
 1.486 us   |      }
 1.671 us   |      io_serial_in();
 411.342 us |    }

In another machine, I measured a throughput of 11.5KB/s, with the serial
controller taking between 80-90us to send each byte. That matches the
expected throughput for a configuration of 115200 bps.

This patch changes the serial8250_console_write to use the 16550 fifo
if available. In my benchmarks I got around 25% improvement in the slow
machine, and no performance penalty in the fast machine.

Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20211222112831.1968392-2-wander@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 13:19:49 +01:00
Yanteng Si
adbfddc757 docs/driver-api: Replace a comma in the n_gsm.rst with a double colon
Since b9e851cd4a ("tty: n_gsm: Add some instructions and code for requester") which
introduced a warning:

linux/Documentation/driver-api/serial/n_gsm.rst:23: WARNING: Definition list ends without a blank line; unexpected unindent.
linux/Documentation/driver-api/serial/n_gsm.rst💯 WARNING: Definition list ends without a blank line; unexpected unindent.
linux/Documentation/driver-api/serial/n_gsm.rst:115: WARNING: Inline emphasis start-string without end-string.
linux/Documentation/driver-api/serial/n_gsm.rst:118: WARNING: Inline emphasis start-string without end-string.
linux/Documentation/driver-api/serial/n_gsm.rst:120: WARNING: Inline emphasis start-string without end-string.
linux/Documentation/driver-api/serial/n_gsm.rst:122: WARNING: Inline emphasis start-string without end-string.
linux/Documentation/driver-api/serial/n_gsm.rst:125: WARNING: Inline emphasis start-string without end-string.
linux/Documentation/driver-api/serial/n_gsm.rst:139: WARNING: Inline emphasis start-string without end-string.

A paragraph consisting of two colons ("::") signifies that the following text block(s) comprise a literal block.
Add soome blank lines.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211209092439.562433-1-siyanteng@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21 10:18:36 +01:00
lianzhi chang
fb09d0ac07 tty: Fix the keyboard led light display problem
Use the "ctrl+alt+Fn" key combination to switch the system from tty to
desktop or switch the system from desktop to tty. After the switch is
completed, it is found that the state of the keyboard lock is
inconsistent with the state of the keyboard Led light.The reasons are
as follows:

* The desktop environment (Xorg and other services) is bound to a tty
  (assuming it is tty1), and the kb->kbdmode attribute value of tty1
  will be set to VC_OFF. According to the current code logic, in the
  desktop environment, the values of ledstate and kb->ledflagstate
  of tty1 will not be modified anymore, so they are always 0.

* When switching between each tty, the final value of ledstate set by
  the previous tty is compared with the kb->ledflagstate value of the
  current tty to determine whether to set the state of the keyboard
  light. The process of switching between desktop and tty is also the
  process of switching between tty1 and other ttys. There are two
  situations:

  - (1) In the desktop environment, tty1 will not set the ledstate,
  which will cause when switching from the desktop to other ttys,
  if the desktop lights up the keyboard's led, after the switch is
  completed, the keyboard's led light will always be on;

  - (2) When switching from another tty to the desktop, this
  mechanism will trigger tty1 to set the led state. If other tty
  lights up the led of the keyboard before switching to the desktop,
  the led will be forcibly turned off. This situation should
  be avoided.

* The current patch is to solve these problems: When VT is switched,
  the keyboard led needs to be set once.Ensure that after the
  switch is completed, the state of the keyboard LED is consistent
  with the state of the keyboard lock.

Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: lianzhi chang <changlianzhi@uniontech.com>
Link: https://lore.kernel.org/r/20211215125125.10554-1-changlianzhi@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21 09:19:14 +01:00
Xianwei Zhao
34de666684 dt-bindings: serial: amlogic, meson-uart: support S4
Add serial bindings support menson S4 SoC family.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20211221030146.522-1-xianwei.zhao@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21 09:18:49 +01:00
Andy Shevchenko
d6d9d17aba tty: tty_io: Switch to vmalloc() fallback in case of TTY_NO_WRITE_SPLIT
When TTY_NO_WRITE_SPLIT is set and 64 KiB chunks are used, allow
vmalloc() fallback. Supply __GFP_RETRY_MAYFAIL to make kmalloc()
preferable over vmalloc() since we may want a better performance.

Note, both current users copy data to another buffer anyway, so
the type of our allocation doesn't affect their expectations.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211220133250.3070-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21 09:18:44 +01:00
Xiang wangx
e822b4973f tty/ldsem: Fix syntax errors in comments
Delete the redundant word 'are'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20211208142036.7956-1-wangxiang@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21 09:15:49 +01:00
Magnus Damm
712fe4c849 serial: sh-sci: Remove BREAK/FRAME/PARITY/OVERRUN printouts
Update the SCIF serial driver to remove printouts for break, frame, parity
and overrun errors. This reduces the amount of console printouts generated
by the defconfig kernel on R-Car Gen3 for certain use cases. To retrieve
more information about such errors the user may inspect counters. Also these
errors are fed into the TTY layer for further application specific handling.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Link: https://lore.kernel.org/r/163884254093.18109.2982470198301927679.sendpatchset@octo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:56 +01:00
Andy Shevchenko
46dacba8fe serial: 8250_pericom: Use serial_dl_write() instead of open coded
It's better to stick with standard API to write and read DL value
when the hardware is compatible with it. In case any quirks are
needed it may be easily added in one place rather than modifying
code here and there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:22 +01:00
Jay Dolan
b4ccaf5aa2 serial: 8250_pericom: Re-enable higher baud rates
Add UPF_MAGIC_MULTIPLIER to the port flags since there is now
range checking in serial8250_get_baud_rate() in 8250_port.c.

Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:22 +01:00
Andy Shevchenko
fcfd3c09f4 serial: 8250_pci: Split out Pericom driver
Pericom along with Acces I/O support consumes a lot of LOCs in 8250_pci.c.
For the sake of easier maintenance, split it to a separate driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:55:22 +01:00
Sam Protsenko
8cf8d3c4a6 tty: serial: samsung: Fix console registration from module
On modern Exynos SoCs (like Exynos850) the UART can be implemented as a
part of USI IP-core. In such case, USI driver is used to initialize USI
registers, and it also calls of_platform_populate() to instantiate all
sub-nodes (e.g. serial node) of USI node. When serial driver is
built-in, but USI driver is a module, and CONFIG_SERIAL_SAMSUNG_CONSOLE
is enabled, next call chain will happen when loading USI module from
user space:

    usi_init
      v
    usi_probe
      v
    of_platform_populate
      v
    s3c24xx_serial_probe
      v
    uart_add_one_port
      v
    uart_configure_port
      v
    register_console
      v
    try_enable_new_console
      v
    s3c24xx_serial_console_setup

But because the serial driver is built-in, and
s3c24xx_serial_console_setup() is marked with __init keyword, that
symbol will discarded and long gone by that time already, causing failed
paging request.

That happens during the next config combination:

    EXYNOS_USI=m
    SERIAL_SAMSUNG=y
    SERIAL_SAMSUNG_CONSOLE=y

That config should be completely possible, so rather than limiting
SERIAL_SAMSUNG choice to "m" only when USI=m, remove __init keyword for
all affected functions.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-6-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:54:37 +01:00
Sam Protsenko
0882b473b0 tty: serial: samsung: Enable console as module
Enable serial driver to be built as a module. To do so, init the console
support on driver/module load instead of using console_initcall().

Inspired by commit 87a0b9f98a ("tty: serial: meson: enable console as
module").

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-5-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:54:10 +01:00
Sam Protsenko
59f37b7370 tty: serial: samsung: Remove USI initialization
USI control is now extracted to the dedicated USI driver. Remove USI
related code from serial driver to avoid conflicts and code duplication.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211204195757.8600-4-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 16:53:44 +01:00
Greg Kroah-Hartman
35eaa42c4a Linux 5.16-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG/rsoeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGLW8H/0sfRUxZNJ+DgO6W
 0LpyIx1DF7S2x1wOQGl7VZsjdy+dtuOW4BtEoqhuQWgQ2sr0zbavbeyZYTXD1+d6
 I1h5C6JMD138JkoqZNdeyWwsalAFtVItH+lzszUGKTxueTbKCJTkGMerBZVu/gVY
 U3QYZHEkUH6o/2fINYfSMhEgyJpjVEUoaztB2drsC0tNUGeDjTmrhlRrWIKZ6Kn+
 oAiMqsomSBF09TZ++GEqMYDTm39CwNDPJzKGyyOx86ydcg4ErWvjp1jfAUX0cvFG
 dso2K5mDzTewdF8bW0A1KvsQaliMFpxgZ5CTblYQ6HvyltjRj+0B8207VzHQXBKV
 YFZ8y9A=
 =mfug
 -----END PGP SIGNATURE-----

Merge 5.16-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20 10:00:30 +01:00
Linus Torvalds
a7904a5389 Linux 5.16-rc6 2021-12-19 14:14:33 -08:00
Linus Torvalds
f291e2d899 Two small fixes, one of which was being worked around in selftests.
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG/fW8UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOVBAf/dZDUEnrsu/o4xVPjPinMihtMstGk
 RP7PqmJ+6nHeDsfoivIiigaFchpc0DYq2kU/8iOPkbsEnLyFuhKg1jUHMQiK5ZGY
 shWvJq9HEwqAQ4v3H3PC5SomwlO4UmRkbrR4NT1SwFBSIk9s+soVbDZrdL8bJW7x
 6XS01LsXeUPEcJj+h9bDGKmnibkiE4hsf9jGMgfiXgF33DB+LDNU9TH9MFn4K6J2
 ColgIqZ+o5dXn7wMcsDsw+DTj81nki+gkghmW9k5rC5FA3qmKd3e5T2sgKey3Ztd
 J+acNmGyG/hhYNE4RHXaN+ckNEcqywcCA31DfWq87aw6yP4pF2dKWu+BYw==
 =yEYt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Two small fixes, one of which was being worked around in selftests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Retry page fault if MMU reload is pending and root has no sp
  KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
  KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
2021-12-19 12:44:03 -08:00
Linus Torvalds
2da09da4ae block-5.16-2021-12-19
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmG/Z/MQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjo7EADdal+Z26fAabpI/wHJJQQKOE9WIy3hP5kA
 G466lPP4FvW+2JIclxRGWmBfkvnzzKLjEFKg2OJZQgOvSycut217qBNxG4xpxy6O
 a0B0jKV3Dh8uLGaaOwvwcYmeBzuEnzmr+qh5hQJQDr+9Cpx491Uh7+GABOt+sceY
 +j+KNNNShcK1qUYtYHsKqSvxEAyTmKuN0uz6rOTbGr/Z2TjWXVVBjRw5g3J52U7y
 DjueqM0Y7qebCN+DexdOXZDC4h3A5/j1kCABPe3Vx3yRRWR1RJDLGDfQes/QZDpF
 sf5kkr/1iPki7Dh2laLin4686sNa4HyIJgS8wlrVXGBnRl38SGTShcbuP94m5okJ
 JsdBD38pmmBsSaokKGpxfsG1N5kf3MpBD9zc2WWeiYpwZH+Mr3cRwSvrz3jUpVqL
 MfrHoCHtgqOgIdC7Jdv3ilet3ujfp9yX9QcgIljgkxlBHZHQxX2mXcobROdWbMgz
 v+sn0Ot9+bEf4FrwSeq43fWgBGTK3IbiLajtxWozTKvy3Re+hnDnfoHFqUZE9yfe
 nFzKJPXeplKdM9Y5J75OaJQ+Ohp0F+0jcPNGHeseEWqvJhK0A5mgssM8TqrTQkAo
 GJj8DZQU8Szc0q7yO7gqVJ398sjyKEtL8Rg3qTGLmKJrNdFis+bmjtaDzyDd4HeW
 Uij+cetUuw==
 =dbu4
 -----END PGP SIGNATURE-----

Merge tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block

Pull block revert from Jens Axboe:
 "It turns out that the fix for not hammering on the delayed work timer
  too much caused a performance regression for BFQ, so let's revert the
  change for now.

  I've got some ideas on how to fix it appropriately, but they should
  wait for 5.17"

* tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block:
  Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
2021-12-19 12:38:53 -08:00
Linus Torvalds
a76c3d0358 - Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it
is restored to its reset state
 
 - Mask MSI-X vectors late on the init path in order to handle
 out-of-spec Marvell NVME devices which apparently look at the MSI-X mask
 even when MSI-X is disabled
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmG/PCUACgkQEsHwGGHe
 VUpAkg//WZNlzHyovL4EslM/E2UPq23ALYGfK36td4b9G2+9PvnOZMeQ6hM8rOeN
 pMcwpSBvOs3hlWTWjhDLKWZwkxFBNi53Fj2YvxDFUFj771jFNIpvoIY47z2AB03E
 FnNUQHJNUe5clxARNc3RTlLtMURGghyfY7xwd/3UQcr6xfma7bZhiraUUpy/vUTn
 29QhR4/iSNIqZdA1gzapDwnlRjvr3qcFe/Xa7tfqrs3xOKFGIRcHTpVMdhB4iBON
 7JCZr/lKiw/HiJzXHgNG1SmLR6QyGVLshga5tMoswzKqoIDHbW7szBUFMe816/rP
 M5jfwkiUznvmrcSzqs12K5whLSRPXT2IFRegtcuA8bjNowwZqPWVEaY+z1s2iHeO
 u2WZnsaAHrqQqgZIR2bP6x1cex2bRERDEeUq2tj3A9EiTzEjI5OT66/cjeThiVDT
 b8J/vJEYiNBnqEI5REM1oajYLDO71H4SHxjZqfSGRxgHBwEcVry8b39QbglQPZ0V
 87+2IhDcLfKcCQehCLb5Qd5PqFZMS4NM1KlcVjrt8O9Y01A0qIor9ZVPcA38R5cA
 nPo5EAALVX5z22KbnMmKgaL3APARsh9NM2wW0F5699irL2EgiOEWW+ENKOzycd8f
 dzFLT0UrZ6S07IiANAc4mhMpI2cIRuVJGDKJuWVOwn47V1L37ys=
 =Kdqk
 -----END PGP SIGNATURE-----

Merge tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it
   is restored to its reset state

 - Mask MSI-X vectors late on the init path in order to handle
   out-of-spec Marvell NVME devices which apparently look at the MSI-X
   mask even when MSI-X is disabled

* tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error
  PCI/MSI: Mask MSI-X vectors only on success
2021-12-19 12:28:46 -08:00
Linus Torvalds
e1fe1b10e6 - Make sure the CLOCK_REALTIME to CLOCK_MONOTONIC offset is never positive
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmG/OTsACgkQEsHwGGHe
 VUrBWxAAhCQ5rFc5WkVxN3Lr2JLtY2bNUAOrdWNVXXmuKIZhbCgnXZ6a7NH9Ins/
 zkLS7YL1gaZtcK+sYnPbO7Z6oTVEqV5UZnxuUH8DF8Q2U7cVdGvQSeHx5ghx4O35
 13P0RSrj0++Q03dc5mf7+OA7RTuH00JpFCvRavpHNJDYFIN+gl1pPDjM/0g+j90W
 PwFa/Hr8vOH7vpPRwygZ+yWfMunb7nTpY7Pa7toSQtE4NR6L2+A49+0/scjD5i9n
 wQCFI4Md49DRV8qvC04YmN4XC72PBKo59z0ptw1LP1yYuD3n0IjjxhRmkaEGLS/x
 abSs3DfwDDD3Bkl/CprJ6ZfoNez5jOsgdPgPH+c5QdHYk837JAgiLZL0M5YK+Gqf
 azuYSv0XfSA6Jg4ioaqsw5gq2QhJS0/ej3VN9qLIspDLncx0BHHr99inrmuvONbl
 cgtm24xQx8ezG8iEK4Ij05bg/sflwP8czTx4La8tnK2p1VK+xHeezKRLjEFqmXCr
 NV8nZEPO7QVbNinViHnEcvz4fur1lYHpCJnG2UbNPipYT2XHsAkaVEZ8uvmg+Ovy
 alcAasSVq9YdQbgWyYFmwWXVoPeG87z53MDA7kPk2TihJaOz2jaY0me5J6fOgSqh
 QFETA8Hcd3Do9hf0MRY9HTX18/uKinW8HclVw2yZxdztGfOfAxA=
 =8tah
 -----END PGP SIGNATURE-----

Merge tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fix from Borislav Petkov:

 - Make sure the CLOCK_REALTIME to CLOCK_MONOTONIC offset is never
   positive

* tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Really make sure wall_to_monotonic isn't positive
2021-12-19 12:23:18 -08:00
Linus Torvalds
909e1d166c - Fix the condition checking when the optimistic spinning of a waiter needs
to be terminated
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmG/NxMACgkQEsHwGGHe
 VUpzQw/+OQ6cDj41E+482w3iQDdnQWTyWV29ukyBbR+QRDmi7IyPIR6YQ3mEz0Wu
 qiG76aO3R7+y0mc84ISaZPhbZ1pTCvOPaBiE91rachc1w9bLH1J/HIy2veKvPw29
 8Vhn6sB2lUoh8y8Cy8AHgD0D6u/imBuBrVyO+qT22r1ZUlnZj02fT1U/XD2e3WNO
 Id9JXhzu6S2leRqg5hSS6WodXbtGBsM4k5jDscu3s4Akv0JS7dxaeVaEGLw5oqyJ
 +sIL6V6BwbfLEe4UOgvVzVgwzXnyhqtVF8ldaqj3PpdjhqUtzqGEmirUq4WVjZ+R
 A1mHZ3bgPQNqmdhhWNtz1IFSJcuVXGEgXSS98LStyLyxVPiAByo5wHWJxF3jx/UW
 ag2boT/MyoKP3iRclUKOgRqeDFsDH4HCNF9YEyqu5uSrvJhMNwhhCttCDFKu3cAl
 vSEXmgNr1gcL1IAUlm3w4ZQIU8x/eznfhZiVpoWqtGhSxQPmTShV/YT4S7SY7mtf
 0kxhK/Y1nS4nQqDTyuyVzJDFVX1ZoS0SJXe1L9TnMiD7VLO9wEblgdaDfp8DxCrY
 YPCpnpmnV9tOyGVmbAJU+Xz9Pbuoahr0h7JoslPDKMJQTO30vc0reF2Z5gV05FCM
 SgFUExL9a3TGLplMPmz96MhtTnN/a884txQOCCpvDygubXVLnTs=
 =85I3
 -----END PGP SIGNATURE-----

Merge tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fix from Borislav Petkov:

 - Fix the rtmutex condition checking when the optimistic spinning of a
   waiter needs to be terminated

* tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()
2021-12-19 12:17:26 -08:00
Linus Torvalds
c36d891d78 - Prevent lock contention on the new sigaltstack lock on the common-case
path, when no changes have been made to the alternative signal stack.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmG/NZ0ACgkQEsHwGGHe
 VUqwEQ/8CCQ2KKBbDZOYIr1wnl+FDIycgq7tnz+q9SomzxQODdDWLREBoTPsOtoE
 NZgXZEQxX4Wh/+4rvvdSMCVT3nz2GvSSasVKGrPZyLpDDyL3coRO0Ngx9iRUd1kF
 j67e9oMuNboPC5jJfP9cC4T+GgDQDnXAjjT3jX7aiIXnNjnOCTZ5Z7W8GKw7d2qH
 4L2SJwAPOkuRicdQiRMJhVLsowsDIZtC8q8OZHhwu0dqM3/JVJCIxKKGKV69j5uk
 TUP6M0ZdyR30VrDfKYlm3m5fY0YFsBY/algphP41Hz5sUe9Xsw6F5+8sL3nCqLz1
 BBUFr/00qVruM3jWmIag/OQ8/4cAFZjrx+8ewdF61OEOWya9Mq7VxINjT8R77B0i
 AuA6Bkv1LArJyfvywbbD6JzAj7TQFPuhFPc0BUFwZfn+B1rvxm88JK2mjR9aO/wZ
 ZHgDJ5hOSIKKNJ2W9g2fhW0MTMUELxKqxHZqOmQU/8ydVxYHZtD2GLHLDAU3XBoe
 9PTntBvv7+qxqNQyY70k4jzIRfOFB8XuYxeWCbg10LqkbFFm2otYN2orsjVVBY7u
 9wPQhFvJo6pHBx+dNIV6be56SnIeTCdIWBqlUcAto5mCVbmIxQoIMoNLo6rGBrhA
 7UdhVCFJJki/Bs92aEQxl09volI9Ec7yXvmpU74LfKD+Gc8TxQo=
 =if9T
 -----END PGP SIGNATURE-----

Merge tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull signal handlign fix from Borislav Petkov:

 - Prevent lock contention on the new sigaltstack lock on the
   common-case path, when no changes have been made to the alternative
   signal stack.

* tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal: Skip the altstack update when not needed
2021-12-19 11:46:54 -08:00
Linus Torvalds
a4cc5ea443 - only enable pci_remap_iospace() for Ralink devices
-----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmG/DtkaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAmSA/9E+u2lGZKybIKiKSU9AT/
 nDpgEQqbT/Z29OS9VsV4CjLBpQLv44EbER9IxhemfsytOEfZPveY/X/RzLSNDYKx
 DqB2a+vPynpTtKyMvkIhh1lcze1ZmR9s87S4CB38mQ+5/0asSpofIr0y2nAwTmFz
 CLa2cyhy3se35SjmoTxdFAKonOG0MZ7OJoI0qiPUhAg+XlYI9Z8D2yllhrwl5GiN
 AUDbR88RZBmfrEJS6p4TlHZgE4eV893uzQLxQtrChu9HJPAeouMvCXsQBQLZJRu7
 r9n3koM6XY77Xxm1qZB3xHKdfxBojSBj3kJvgwbgZDYILROLdOVempMdCnOONJyZ
 WThmjx8/MUMC0X/U4ECjGT7D6XALksWA2qHTKScl3tqOZu/wQGrMVYqjIz2B1gtJ
 DEyhmm+fKHkhpnMY19Bby6tpd1OkjO0Wg5dsTpWAub94XZi2Xq0T2n9qKQytwy5t
 y6Sdsb6f9e4MH0/kAzHbKakNT5v5eDx8k2h3zNFtBzvQZLmlbYeDO5aLKsfuyvNQ
 YvDFVf1fRrTaHv5AffVhgNYP6LjNKFMpte1aPiU5iBEdEnKs17uMKaSM9g5hEm23
 yHf2TcsEotteg1iXxgZr5akY3tPE9wFYmDU5EKp3xv19s6ODj9pbBIZE/ujgHcOt
 SgaBNwy/qK0N5rHXSOrSZSA=
 =IyrT
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fix from Thomas Bogendoerfer:

 - only enable pci_remap_iospace() for Ralink devices

* tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Only define pci_remap_iospace() for Ralink
2021-12-19 11:40:11 -08:00
Linus Torvalds
713ab911f2 powerpc fixes for 5.16 #4
Fix a recently introduced oops at boot on 85xx in some configurations.
 
 Fix crashes when loading some livepatch modules with STRICT_MODULE_RWX.
 
 Thanks to: Joe Lawrence, Russell Currey, Xiaoming Ni.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmG+q+UTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgG5sEACVsb39+Q8w0GKJxUGR0Wri1InJTkLC
 UWpd9PVzG6n8+Epl0f+H5cMlv5V6xaDzTsNXEf27xIACMlPSVHVLDW8u/RFPizdp
 fUDUweGUvK/M0GQW89nRV29DjdNjMmUq1KQFM6eEgYN/0nS3HqF27jamiaFhiZ+e
 pJl1g2dy/DTWrFz3V/8b0nv6kyJE8GlpnCmTchDsPNDbzWQVJXVfM7IB/9N+EVna
 MQAZCyKSOafTgNRPOW+Sm4oF64z+Yn4cxURVKfzbM+0Cd8pNIcGZ7McXrnp0DR4t
 bLGeYEzyR1bPc3VTt7b+jafDP41AakRllKAFz65+pdYOcV1hTRM4inbLVPT5Bmz6
 7ANlX/w4BwYWFk3mWW14BoxU02FlRKRddXhusq7x2wIqvtn1KI8Qm1xpneiGpcW+
 GEe+k9ONGowXp/bc47/Co6dPSHKRRHUC3MsgbDv2Y7M5G9vsetckdQzA2bIqYSx8
 r1ZXNiMwQarPeB6FrGvNbekyCsIhJkk6chhtL0k27BVOFqYiHZtaqBs+RCQYPdC8
 Aih8WOEqdldbItFI3MihyKULucgkVpdnm80Ja67qRthuJICF9OML3mdrt83bxEIp
 fu4Bsw8dygVKJWScZj8AUC/ZBxOrrTGyZR1RvsHpaAiEfinMkxxTnXjqNDiSZWXt
 DKKLx6pfSFrokw==
 =Nmp5
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Fix a recently introduced oops at boot on 85xx in some configurations.

  Fix crashes when loading some livepatch modules with
  STRICT_MODULE_RWX.

  Thanks to Joe Lawrence, Russell Currey, and Xiaoming Ni"

* tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/module_64: Fix livepatching for RO modules
  powerpc/85xx: Fix oops when CONFIG_FSL_PMC=n
2021-12-19 11:31:14 -08:00
Linus Torvalds
9273d6cb99 two cifs/smb3 fixes, one fscache related, and one mount parsing related for stable
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmG9V/0ACgkQiiy9cAdy
 T1GbQAv+N/2p7mMzhxcB91xlU6DSo2kZhC1FcmiXld3BEiMzkef6Rtb/lzW1AtBP
 kNgqjVU7MMmdFQNKLhrHUV2BNCtLWKOC2I0xTZqr+nBlGMJkiNUBzUWW8DcnLd1e
 zGky7Wck8HHu7LdnZA3TVlPhNV9KjdlHMEYBBJFlOc779a/Q0KyHLdwhP9mpSa2d
 QrVRHkBMylNUqF4WiLKQ0I8eJFhKtd7pJNAW1qGeKe2YDV6kZQiXwHOLIZb7SHET
 9Qtj83IwsQ13cLTmb7tGibj0Fn+GEEqgBv40PjSMuTCoiCpfhcLrx0lWT5hxlxao
 9w3Yw1pPPaJXbxCmL9b3Bqm3vnNqMaN7HqxsuGIFwnulGFB4GJY2l+ZQPcTHzWG0
 oCHlimlixH7RKVEfjIDhidC1C0ReZI8/1XuHPGE17Ysxt6L7dH/a7J2y7SlIdYTZ
 ZVvVT0Kib74I7ZUJH1ymc4MdAVnBIkiTGOrQk/FU+cHOyzMUpNcwXiCqkvF77QUa
 hDW4hkzE
 =MW5I
 -----END PGP SIGNATURE-----

Merge tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Two cifs/smb3 fixes, one fscache related, and one mount parsing
  related for stable"

* tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: sanitize multiple delimiters in prepath
  cifs: ignore resource_id while getting fscache super cookie
2021-12-19 11:23:02 -08:00
Sean Christopherson
18c841e1f4 KVM: x86: Retry page fault if MMU reload is pending and root has no sp
Play nice with a NULL shadow page when checking for an obsolete root in
the page fault handler by flagging the page fault as stale if there's no
shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending.
Invalidating memslots, which is the only case where _all_ roots need to
be reloaded, requests all vCPUs to reload their MMUs while holding
mmu_lock for lock.

The "special" roots, e.g. pae_root when KVM uses PAE paging, are not
backed by a shadow page.  Running with TDP disabled or with nested NPT
explodes spectaculary due to dereferencing a NULL shadow page pointer.

Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the
root.  Zapping shadow pages in response to guest activity, e.g. when the
guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current
vCPU isn't using the affected root.  I.e. KVM_REQ_MMU_RELOAD can be seen
with a completely valid root shadow page.  This is a bit of a moot point
as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will
be cleaned up in the future.

Fixes: a955cad84c ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211209060552.2956723-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19 19:38:58 +01:00
Vitaly Kuznetsov
0b091a43d7 KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19 19:35:29 +01:00
Vitaly Kuznetsov
1aa2abb33a KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should
not depend on guest visible CPUID entries, even if just to allow
creating/restoring guest MSRs and CPUIDs in any sequence.

Fixes: 27461da310 ("KVM: x86/pmu: Support full width counting")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19 19:35:18 +01:00
Jens Axboe
87959fa16c Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
This reverts commit cb2ac2912a.

Alex and the kernel test robot report that this causes a significant
performance regression with BFQ. I can reproduce that result, so let's
revert this one as we're close to -rc6 and we there's no point in trying
to rush a fix.

Link: https://lore.kernel.org/linux-block/1639853092.524jxfaem2.none@localhost/
Link: https://lore.kernel.org/lkml/20211219141852.GH14057@xsang-OptiPlex-9020/
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-19 07:58:44 -07:00
Linus Torvalds
3f667b5d40 TTY/Serial fixes for 5.16-rc6
Here are 2 small tty/serial fixes for 5.16-rc6.  They include:
 	- n_hdlc fix for syzbot reported problem that you were
 	  previously copied on.
 	- 8250_fintek driver fix that resolved a console problem by
 	  removing a previous change.
 
 Both have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYb4RaQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn7zQCaAz1ifZnEEhKxP5yan7znu3g+bncAn2hac2Bt
 ZR15/yulRfrw9Sn0TbDR
 =MloZ
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are two small tty/serial fixes for 5.16-rc6.  They include:

   - n_hdlc fix for syzbot reported problem that you were previously
     copied on.

   - 8250_fintek driver fix that resolved a console problem by removing
     a previous change.

  Both have been in linux-next with no reported issues"

* tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_fintek: Fix garbled text for console
  tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous
2021-12-18 13:23:55 -08:00
Linus Torvalds
fb7d082913 USB fixes for 5.16-rc6
Here are a number of small USB driver fixes for reported problems for
 5.16-rc6.  They include:
 	- dwc2 driver fixes
 	- xhci driver fixes
 	- cdnsp driver fixes
 	- typec driver fix
 	- gadget u_ether driver fix
 	- new quirk additions
 	- usb gadget endpoint calculation fix
 	- usb serial new device ids
 	- revert of a xhci-dbg change that broke early debug booting
 
 All changes, except for the revert, have been in linux-next with no
 reported problems.  The revert was from yesterday, and it was reported
 by the developers affected that it resolved their problem.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYb4SyA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynliACgusJ0z1JblgjetgAJGnCZb8G1hwgAoK0w2kB8
 U00OQSDCsE4xNqKVGeyr
 =L8hW
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for reported problems.
  They include:

   - dwc2 driver fixes

   - xhci driver fixes

   - cdnsp driver fixes

   - typec driver fix

   - gadget u_ether driver fix

   - new quirk additions

   - usb gadget endpoint calculation fix

   - usb serial new device ids

   - revert of a xhci-dbg change that broke early debug booting

  All changes, except for the revert, have been in linux-next with no
  reported problems. The revert was from yesterday, and it was reported
  by the developers affected that it resolved their problem"

* tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: early: convert to readl_poll_timeout_atomic()"
  usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
  usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
  USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)
  usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
  usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
  USB: gadget: bRequestType is a bitfield, not a enum
  USB: serial: option: add Telit FN990 compositions
  USB: serial: cp210x: fix CP2105 GPIO registration
  usb: cdnsp: Fix incorrect status for control request
  usb: cdnsp: Fix issue in cdnsp_log_ep trace event
  usb: cdnsp: Fix incorrect calling of cdnsp_died function
  usb: xhci-mtk: fix list_del warning when enable list debug
  usb: gadget: u_ether: fix race in setting MAC address in setup phase
2021-12-18 13:16:43 -08:00
Linus Torvalds
0f03adcca7 perf tools fixes for v5.16: 4th batch
- Fix segfaults in 'perf inject' related to usage of unopened files.
 
 - The return value of hashmap__new() should be checked using IS_ERR().
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYb3upAAKCRCyPKLppCJ+
 J9Y3AP4uRzl8VAh3kc/ahe2bGyLCi8KRi4ciVx9Y3a2AzfS46QD/TzDWIAl3Yg68
 HMvMiWcof8mMTXgLIcvWKkNxPNeQJwM=
 =rZro
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix segfaults in 'perf inject' related to usage of unopened files

 - The return value of hashmap__new() should be checked using IS_ERR()

* tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf inject: Fix segfault due to perf_data__fd() without open
  perf inject: Fix segfault due to close without open
  perf expr: Fix missing check for return value of hashmap__new()
2021-12-18 11:53:14 -08:00
Adrian Hunter
c271a55b0c perf inject: Fix segfault due to perf_data__fd() without open
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.

  $ perf record uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
  $ perf inject -i perf.data --vm-time-correlation=dry-run
  Segmentation fault (core dumped)
  $ gdb --quiet perf
  Reading symbols from perf...
  (gdb) r inject -i perf.data --vm-time-correlation=dry-run
  Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

  Program received signal SIGSEGV, Segmentation fault.
  __GI___fileno (fp=0x0) at fileno.c:35
  35      fileno.c: No such file or directory.
  (gdb) bt
  #0  __GI___fileno (fp=0x0) at fileno.c:35
  #1  0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
  #2  perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
  #3  cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
  #4  0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
  #5  0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
  #6  run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
  #7  main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
  (gdb)

Fixes: 0ae0389362 ("perf tools: Pass a fd to perf_file_header__read_pipe()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18 08:31:14 -03:00
Adrian Hunter
0c8e32fe48 perf inject: Fix segfault due to close without open
The fixed commit attempts to close inject.output even if it was never
opened e.g.

  $ perf record uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
  $ perf inject -i perf.data --vm-time-correlation=dry-run
  Segmentation fault (core dumped)
  $ gdb --quiet perf
  Reading symbols from perf...
  (gdb) r inject -i perf.data --vm-time-correlation=dry-run
  Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

  Program received signal SIGSEGV, Segmentation fault.
  0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
  48      iofclose.c: No such file or directory.
  (gdb) bt
  #0  0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
  #1  0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
  #2  0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
  #3  0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
  #4  0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
  #5  run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
  #6  main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
  (gdb)

Fixes: 02e6246f53 ("perf inject: Close inject.output on exit")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18 08:31:14 -03:00
Miaoqian Lin
0a515a06c5 perf expr: Fix missing check for return value of hashmap__new()
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.

Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com
[ s/kfree()/free()/ and add missing linux/err.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18 08:31:14 -03:00
Zqiang
8f556a326c locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()
Optimistic spinning needs to be terminated when the spinning waiter is not
longer the top waiter on the lock, but the condition is negated. It
terminates if the waiter is the top waiter, which is defeating the whole
purpose.

Fixes: c3123c4314 ("locking/rtmutex: Dont dereference waiter lockless")
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211217074207.77425-1-qiang1.zhang@intel.com
2021-12-18 10:55:51 +01:00