Commit Graph

1335 Commits

Author SHA1 Message Date
Linus Torvalds
ae64f9bd1d Linux 4.15-rc2 2017-12-03 11:01:47 -05:00
Linus Torvalds
4fbd8d194f Linux 4.15-rc1 2017-11-26 16:01:47 -08:00
Masahiro Yamada
ef46d9b3dc kbuild: clean up *.i and *.lst patterns by make clean
*.i and *.lst are supported by the single target build.  Clean up them.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-23 23:12:05 +09:00
Masahiro Yamada
ebaad7d364 kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used
The "rpm" has been kept for backward compatibility since pre-git era.
I am planning to remove it after the Linux 4.18 release.  Annouce the
end of the support, prompting to use "rpm-pkg" instead.

If you use "rpm", it will work like "rpm-pkg", but warning messages
will be displayed as follows:

  WARNING: "rpm" target will be removed after Linux 4.18
           Please use "rpm-pkg" instead.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-23 23:12:05 +09:00
Chris Fries
ae6b289a37 kbuild: Set KBUILD_CFLAGS before incl. arch Makefile
Set the clang KBUILD_CFLAGS up before including arch/ Makefiles,
so that ld-options (etc.) can work correctly.

This fixes errors with clang such as ld-options trying to CC
against your host architecture, but LD trying to link against
your target architecture.

Signed-off-by: Chris Fries <cfries@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-23 13:12:37 +09:00
Masahiro Yamada
f7adc3124d kbuild: create built-in.o automatically if parent directory wants it
"obj-y += foo/" syntax requires Kbuild to visit the "foo" subdirectory
and link built-in.o from that directory.  This means foo/Makefile is
responsible for creating built-in.o even if there is no object to
link (in this case, built-in.o is an empty archive).

We have had several fixups like commit 4b024242e8 ("kbuild: Fix
linking error built-in.o no such file or directory"), then ended up
with a complex condition as follows:

  ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
  builtin-target := $(obj)/built-in.o
  endif

We still have more cases not covered by the above, so we need to add
  obj- := dummy.o
in several places just for creating empty built-in.o.

A key point is, the parent Makefile knows whether built-in.o is needed
or not.  If a subdirectory needs to create built-in.o, its parent can
tell the fact when descending.

If non-empty $(need-builtin) flag is passed from the parent, built-in.o
should be created.  $(obj-y) should be still checked to support the
single target "%/".  All of ugly tricks will go away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2017-11-18 11:38:58 +09:00
Bjørn Forsman
16f8259ca7 kbuild: /bin/pwd -> pwd
Most places use pwd and rely on $PATH lookup. Moving the remaining
absolute path /bin/pwd users over for consistency.

Also, a reason for doing /bin/pwd -> pwd instead of the other way around
is because I believe build systems should make little assumptions on
host filesystem layout. Case in point, we do this kind of patching
already in NixOS.

Ref. commit 028568d84d
("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)").

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-18 11:32:27 +09:00
Linus Torvalds
09bd7c75e5 Kbuild updates for v4.15
One of the most remarkable improvements in this cycle is, Kbuild is
 now able to cache the result of shell commands.  Some variables are
 expensive to compute, for example, $(call cc-option,...) invokes the
 compiler.  It is not efficient to redo this computation every time,
 even when we are not actually building anything.  Kbuild creates a
 hidden file ".cache.mk" that contains invoked shell commands and
 their results.  The speed-up should be noticeable.
 
 Summary:
 
 - Fix arch build issues (hexagon, sh)
 
 - Clean up various Makefiles and scripts
 
 - Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
 
 - Cache variables that are expensive to compute
 
 - Improve cc-ldopton and ld-option for Clang
 
 - Optimize output directory creation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDxaLAAoJED2LAQed4NsGIHQP/isMxxaIxIAWU56+ZcII74k7
 639VgrKi9n5y25d1dBRTQg+vReHE6E2JbkCqpVOu11t7m0LT7yUK8v3WwyLf1qTN
 GxnqZ/WMQU5/AYVqIWo8jN4FGHpivHJ6qbeiNJM9qN4RAkzG0sZUq746VaFZYmIR
 Lu0Gf4m4qjifkkhXsQdWT5i7yNTidPqaL6GNb+FcFkEHlVre8jma0kJlgfHxru84
 WmETpjQXvHAZ/R61vY6ekAWpqFhw3ecJY96A9npnx+SQVQdSNAdpaU0SK29jB0ON
 /SAfpHg9oa/gD0LFOKV6zkjnAkd4TEjrJEiHHhz5gjT/SbS3T1llBIGZ1oV4X7Y0
 Vlh9KWlm1FJJI4SIzc9qUaQMp6JtLfEfHKJCc45xVaN3fNrDnR8jl80x5+95ELga
 dCkZgnq5u82MtTysCbHBESwDYQaVPyIrh7In+mduglaCqhqj9KoDjoLoiGfCg7SA
 3tPflYVd629w5l5GrazJ40jWn1+ggMtgMOVooJNJ+dINCP+GxsUpH84Ww2Pdic+/
 qLdud6TeqxrZDGzWXqKNLu8alM8NGgSr101l9gIf1oqSyy63duBpMrxGDoIJS3FU
 rFDoFFUhlfkAXNbQHtVGNzKtcpCjURh992j9Fa1+NfMwSce5IHkMwTvPmNSRowi8
 0llLjXhD/bxK6FpdvlV8
 =zIdO
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:
 "One of the most remarkable improvements in this cycle is, Kbuild is
  now able to cache the result of shell commands. Some variables are
  expensive to compute, for example, $(call cc-option,...) invokes the
  compiler. It is not efficient to redo this computation every time,
  even when we are not actually building anything. Kbuild creates a
  hidden file ".cache.mk" that contains invoked shell commands and their
  results. The speed-up should be noticeable.

  Summary:

   - Fix arch build issues (hexagon, sh)

   - Clean up various Makefiles and scripts

   - Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles

   - Cache variables that are expensive to compute

   - Improve cc-ldopton and ld-option for Clang

   - Optimize output directory creation"

* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
  sh: decompressor: add shipped files to .gitignore
  frv: .gitignore: ignore vmlinux.lds
  selinux: remove unnecessary assignment to subdir-
  kbuild: specify FORCE in Makefile.headersinst as .PHONY target
  kbuild: remove redundant mkdir from ./Kbuild
  kbuild: optimize object directory creation for incremental build
  kbuild: create object directories simpler and faster
  kbuild: filter-out PHONY targets from "targets"
  kbuild: remove redundant $(wildcard ...) for cmd_files calculation
  kbuild: create directory for make cache only when necessary
  sh: select KBUILD_DEFCONFIG depending on ARCH
  kbuild: fix linker feature test macros when cross compiling with Clang
  kbuild: shrink .cache.mk when it exceeds 1000 lines
  kbuild: do not call cc-option before KBUILD_CFLAGS initialization
  kbuild: Cache a few more calls to the compiler
  kbuild: Add a cache for generated variables
  kbuild: add forward declaration of default target to Makefile.asm-generic
  kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
  hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
  ...
2017-11-17 17:45:29 -08:00
Victor Chibotaru
d677a4d601 Makefile: support flag -fsanitizer-coverage=trace-cmp
The flag enables Clang instrumentation of comparison operations
(currently not supported by GCC).  This instrumentation is needed by the
new KCOV device to collect comparison operands.

Link: http://lkml.kernel.org/r/20171011095459.70721-2-glider@google.com
Signed-off-by: Victor Chibotaru <tchibo@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Masahiro Yamada
7f855fc805 kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
In my view, it is not helpful to have a separate file just for
the coccicheck help message.  Merge scripts/Makefile.help into
the top-level Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
2017-11-17 00:33:09 +09:00
Masahiro Yamada
2982c95357 kbuild: remove redundant $(wildcard ...) for cmd_files calculation
I do not see any reason why $(wildcard ...) needs to be called twice
for computing cmd_files.  Remove the first one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-16 09:07:34 +09:00
Linus Torvalds
b293fca43b RISC-V Port for Linux 4.15 v9
This tag contains the core RISC-V Linux port, which has been through
 nine rounds of review on various mailing lists.  The port is not
 complete: there's some cleanup patches moving through the review
 process, a whole bunch of drivers that need some work, and a lot of
 feature additions that will be needed.
 
 The patches contained in this tag have been through nine rounds of
 review on the various mailing lists.  I have some outstanding cleanup
 patches, but since there's been so much review on these patches I
 thought it would be best to submit them as-is and then submit explicit
 cleanup patches so everyone can review them.  This first patch set is
 big enough that it's a bit of a pain to constantly rewrite, and it's
 caused a few headaches with various contributors.
 
 The port is definately a work in progress.  While what's there builds
 and boots with 4.14, it's a bit hard to actually see anything happen
 because there are no device drivers yet.  I maintain a staging branch
 that contains all the device drivers and cleanup that actually works,
 but those patches won't all be ready for a while.  I'd like to get what
 we currently have into your tree so everyone can start working from a
 single base -- of particular importance is allowing the glibc
 upstreaming process to proceed so we can sort out any possibly lingering
 user-visible ABI problems we might have.
 
 Copied below is the ChangeLog that contains the history of this patch
 set:
 
 (v9) As per suggestions on our v8 patch set, I've split the core architecture code
 out from our drivers and would like to submit this patch set to be included
 into linux-next, with the goal being to be merged in during the next merge
 window.  This patch set is based on 4.14-rc2, but if it's better to have it
 based on something else then I can change it around.
 
 This patch set contains just the core arch code for RISC-V, so while it builds
 an nominally boots, you can't print or take an interrupt so it's not that
 useful.  If you're looking to actually boot a system it would probably be
 better to use the full patch set listed below.
 
 We've collected a handful of tags from reviewers, and the remainder of the
 patch set only got minimal feedback last time.  Here's what changed:
 
  * We now use the device tree to initialize the timer driver so it's less
    tighly coupled with the arch port.
  * I cleaned up the defconfigs -- there's actually now just one, and it's
    empty.  For now I think we're OK with what the kernel sets as defaults, but
    I anticipate we'll begin to expand this as people start to use the port
    more.
  * The VDSO symbols version is sane.
  * We WFI while spinning in the boot loop.
  * A handful of comments have been added.
 
 While there are still a handful of FIXMEs in this patch set, we've started to
 get enough interest from various users and contributors that maintaining an out
 of tree patch set is starting to become a big burden.  Hopefully the patches
 are good enough to merge now, which will at least get everyone working in a
 more reasonable manner as we clean up the remaining issues.
 
 This patch set is also availiable on github
 
   https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9-arch
 
 as is the entire patch set necessary to get a more functional RISC-V system up
 and running, including a handful of patches that aren't ready for upstream yet.
 
   https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9
 
 Hopefully I've managed to get everyone's feedback
 
 Here's the change highlights from the whole patch set:
 
 (v8) I know it may not be the ideal time to submit a patch set right now, as
 it's the middle of the merge window, but things have calmed down quite a bit in
 the last month so I thought it would be good to get everyone on the same page.
 There's been a handful of changes since the last patch set, but most of them
 are fairly minor:
 
 * We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit
   systems.  This is user configurable, as it triggers a different code model
   that generates slightly less efficient code.
 * The device tree binding documentation is back, I'd managed to lose it at some
   point.
 * We now pass the atomic64 test suite.  The SBI timer driver has been
 * refactored.
 
 (v7) It's been a while since my last patch set, but the changes han been fairly
 minimal:
 
  * The PCI cleanup patches have been dropped, we'll do them as a separate patch
    set later.
  * We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make
    grep easier.
  * There have been a handful of memory model related tweaks in I/O land,
    particularly relating the PCI and the upcoming platform specification.
    There are significant comments in the relevant files.  This is still a WIP,
    but I think we're close to getting as good as we're going to get until we
    end up with some more specifications.
 
 (v6) As it's been only a day since the v5 patch set, the changes are pretty
 minimal:
 
  * The patch set is now based on linux-next/master, which I believe is a better
    base now that we're getting closer to upstream.
  * EARLY_PRINTK is no longer an option.  Since the SBI console is reasonable,
    there's no penalty to enabling it (and thus no benefit to disabling it).
  * The mmap syscalls were refactored a bit.
 
 (v5) Things have really started to calm down, so this is fairly similar to the
 v4 patch set.  The most interesting changes include:
 
  * We've moved back to a single patch set.
 
  * SMP support has been fixed, I was accidentally running on a non-SMP
    configuration.  There were various mistakes all over the tree as a result of
    this.
 
  * The cmpxchg syscalls have been removed, as they were deemed a bad idea.  As
    a result, RISC-V Linux systems mandate the A extension.  The corresponding
    Kconfig entry to enable builds on non-A systems has been removed.
 
  * A few more atomic fixes: mostly fence changes, but those resulted in a
    handful of additional macros that were no longer necessary.
 
  * riscv_early_sie has been removed.
 
 (v4) There have only been a few changes since the v3 patch set:
 
  * The cmpxchg64 syscall is no longer enabled on 32-bit systems.  It's not
    possible to provide this on SMP systems, and it's not necessary as glibc
    knows not to call it.
 
  * We provide a ELF_HWCAP so users can determine the ISA of the machine the
    kernel is running on.
 
  * The multi-line comments are in a better form.
 
  * There were a handful of headers that could be replaced with the asm-generic
    versions, and a few unnecessary definitions.
 
  * We no longer use printk, but instead use pr_*.
 
  * A few Kconfig and defconfig entries have been cleaned up.
 
 (v3) A highlight of the changes since the v2 patch set includes:
 
  * We've split out all our drivers into separate patch sets, which I've already
    sent out to the relevant maintainers.  I haven't included those patches in
    this patch set, but some of them are necessary to build our port.  A git
    tree that contains all our patch sets merged together lives at
    <https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v3>.
 
  * The patch set is now split up differently: rather than being split per
    directory it is split per topic.  Hopefully this will make it easier to
    review the port on the mailing list.  The split is a bit rough, so you
    probably still want to look at the patch set as a whole.
 
  * atomic.h has been completely rewritten and is hopefully now correct.  I've
    attempted to sanitize the various other memory model related code as well,
    and I think it should all be sane now aside from a handful of FIXMEs
    commented in the code.
 
  * We've changed the cmpexchg syscall to always exist and to not be
    multiplexed.  There is also a VDSO entry for compare and exchange, which
    allows kernels with the A extension to execute user code without the A
    extension reasonably fast.
 
  * Our user-visible register state now contains enough space for the Q
    extension for 128-bit floating point, as well as a few words to allow
    extensibility to future ISA extensions like the eventual V extension for
    vectors.
 
  * A handful of driver cleanups, but these have been split into separate patch
    sets now so I won't duplicate them here.
 
 (v2) A highlight of the changes since the v1 patch set includes:
 
   * We've split out our drivers into the right places, which means now there's
     a lot more patches.  I'll be submitting these patches to various subsystem
     maintainers and including them in any future RISC-V patch sets until
     they've been merged.
 
   * The SBI console driver has been completely rewritten to use the HVC helpers
     and is now significantly smaller.
 
   * We've begun to use weaker barriers as opposed to just the big "fence".
     There's still some work to do here, specifically:
     - We need fences in the relaxed MMIO functions.
     - The non-relaxed MMIO functions are missing R/W bits on their fences.
     - Many AMOs need the aq and rl bits set.
 
   * We now have thread_info in task_struct.  As a result, sscratch now contains
     TP instead of SP.  This was necessary because thread_info is no longer on
     the stack.
 
   * A few shared routines have been added that we use instead of creating
     another arch copy.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAloLD8sTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQbCZEAC2IgWFOAhYDIv4s39jC/iuGcofuuwC
 atTVgKSM8tUES5wBomoVxRH1yjDvmyb2jeq3gsp6gWPcchUpLMdfwf2MwW3NV3Mw
 ESCZPwYiuFhORh1Jt5RSespjK+V9qMvCW0iU6cPE/9kAlPfMGGDv2vEttOFgOGEm
 yVb1i0gHBcdzbw5H0xszBionUAQVXOFqkfO8AW8VPtFMdzZB6t9OBXRgHJLdWgmK
 2Zr5pFN75uivNh4RI1KXHpUeD1kLRVICzG7Ak/aQCfKxWsJutFI1dnLFZmFOIoTf
 2wgW4KsDsZakcA9rILtfo3SFH+mSD5PWzvv5G44yf9sEkGG9bSgxl29GeJYL7NzG
 3Da9FVMvzjIhmxamPGHfFOFTxTud9+6GU6Lj0iBLpHzpcttjhNgE2NXzcY8r1uMD
 BcSwkK3duybjeiZLpwnxOywZidCQDv6pZYyc50WBtV/oUG1fncj8DT2ZTIqGv1V8
 L6D/MXSr1jt9oJeWzfDCxHlaGaHL6grrmyJ8L1tQKPjMp+DbBPFbMLfvbn/dlsat
 mPqmfQZ4zydOVO53k6KiHozGQh6K+cuXMvNxrb9pCRy3etFV2wfTNxtbdeJSa7gj
 xarC6vSia8KFVyXp5nydSks5woHGJFQ1kQYSLEORUWiL5zWILbtI6POzOZeYHgej
 BvTzVq0AVIbxjA==
 =xDIk
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux

Pull RISC-V architecture support from Palmer Dabbelt:
 "This contains the core RISC-V Linux port, which has been through nine
  rounds of review on various mailing lists. The port is not complete:
  there's some cleanup patches moving through the review process, a
  whole bunch of drivers that need some work, and a lot of feature
  additions that will be needed.

  The patches contained in this tag have been through nine rounds of
  review on the various mailing lists. I have some outstanding cleanup
  patches, but since there's been so much review on these patches I
  thought it would be best to submit them as-is and then submit explicit
  cleanup patches so everyone can review them. This first patch set is
  big enough that it's a bit of a pain to constantly rewrite, and it's
  caused a few headaches with various contributors.

  The port is definately a work in progress. While what's there builds
  and boots with 4.14, it's a bit hard to actually see anything happen
  because there are no device drivers yet. I maintain a staging branch
  that contains all the device drivers and cleanup that actually works,
  but those patches won't all be ready for a while. I'd like to get what
  we currently have into your tree so everyone can start working from a
  single base -- of particular importance is allowing the glibc
  upstreaming process to proceed so we can sort out any possibly
  lingering user-visible ABI problems we might have.

  Copied below is the ChangeLog that contains the history of this patch
  set:

   (v9) As per suggestions on our v8 patch set, I've split the core
        architecture code out from our drivers and would like to submit
        this patch set to be included into linux-next, with the goal
        being to be merged in during the next merge window. This patch
        set is based on 4.14-rc2, but if it's better to have it based on
        something else then I can change it around.

        This patch set contains just the core arch code for RISC-V, so
        while it builds an nominally boots, you can't print or take an
        interrupt so it's not that useful. If you're looking to actually
        boot a system it would probably be better to use the full patch
        set listed below.

        We've collected a handful of tags from reviewers, and the
        remainder of the patch set only got minimal feedback last time.
        Here's what changed:

         - We now use the device tree to initialize the timer driver so
           it's less tighly coupled with the arch port.

         - I cleaned up the defconfigs -- there's actually now just one,
           and it's empty. For now I think we're OK with what the kernel
           sets as defaults, but I anticipate we'll begin to expand this
           as people start to use the port more.

         - The VDSO symbols version is sane.

         - We WFI while spinning in the boot loop.

         - A handful of comments have been added.

        While there are still a handful of FIXMEs in this patch set,
        we've started to get enough interest from various users and
        contributors that maintaining an out of tree patch set is
        starting to become a big burden. Hopefully the patches are good
        enough to merge now, which will at least get everyone working in
        a more reasonable manner as we clean up the remaining issues.

   (v8) I know it may not be the ideal time to submit a patch set right
        now, as it's the middle of the merge window, but things have
        calmed down quite a bit in the last month so I thought it would
        be good to get everyone on the same page. There's been a handful
        of changes since the last patch set, but most of them are fairly
        minor:

         - We changed PAGE_OFFSET to allowing mapping more physical
           memory on 64-bit systems. This is user configurable, as it
           triggers a different code model that generates slightly less
           efficient code.

         - The device tree binding documentation is back, I'd managed to
           lose it at some point.

         - We now pass the atomic64 test suite

         - The SBI timer driver has been refactored.

   (v7) It's been a while since my last patch set, but the changes han
        been fairly minimal:

         - The PCI cleanup patches have been dropped, we'll do them as a
           separate patch set later.

         - We've the Kconfig entries from CONFIG_ISA_* to
           CONFIG_RISCV_ISA_*, to make grep easier.

         - There have been a handful of memory model related tweaks in
           I/O land, particularly relating the PCI and the upcoming
           platform specification. There are significant comments in the
           relevant files. This is still a WIP, but I think we're close
           to getting as good as we're going to get until we end up with
           some more specifications.

   (v6) As it's been only a day since the v5 patch set, the changes are
        pretty minimal:

         - The patch set is now based on linux-next/master, which I
           believe is a better base now that we're getting closer to
           upstream.

         - EARLY_PRINTK is no longer an option. Since the SBI console is
           reasonable, there's no penalty to enabling it (and thus no
           benefit to disabling it).

         - The mmap syscalls were refactored a bit.

   (v5) Things have really started to calm down, so this is fairly
        similar to the v4 patch set. The most interesting changes
        include:

         - We've moved back to a single patch set.

         - SMP support has been fixed, I was accidentally running on a
           non-SMP configuration. There were various mistakes all over
           the tree as a result of this.

         - The cmpxchg syscalls have been removed, as they were deemed a
           bad idea. As a result, RISC-V Linux systems mandate the A
           extension. The corresponding Kconfig entry to enable builds
           on non-A systems has been removed.

         - A few more atomic fixes: mostly fence changes, but those
           resulted in a handful of additional macros that were no
           longer necessary.

         - riscv_early_sie has been removed.

   (v4) There have only been a few changes since the v3 patch set:

         - The cmpxchg64 syscall is no longer enabled on 32-bit systems.
           It's not possible to provide this on SMP systems, and it's
           not necessary as glibc knows not to call it.

         - We provide a ELF_HWCAP so users can determine the ISA of the
           machine the kernel is running on.

         - The multi-line comments are in a better form.

         - There were a handful of headers that could be replaced with
           the asm-generic versions, and a few unnecessary definitions.

         - We no longer use printk, but instead use pr_*.

         - A few Kconfig and defconfig entries have been cleaned up.

   (v3) A highlight of the changes since the v2 patch set includes:

         - We've split out all our drivers into separate patch sets,
           which I've already sent out to the relevant maintainers. I
           haven't included those patches in this patch set, but some of
           them are necessary to build our port.

         - The patch set is now split up differently: rather than being
           split per directory it is split per topic. Hopefully this
           will make it easier to review the port on the mailing list.
           The split is a bit rough, so you probably still want to look
           at the patch set as a whole.

         - atomic.h has been completely rewritten and is hopefully now
           correct. I've attempted to sanitize the various other memory
           model related code as well, and I think it should all be sane
           now aside from a handful of FIXMEs commented in the code.

         - We've changed the cmpexchg syscall to always exist and to not
           be multiplexed. There is also a VDSO entry for compare and
           exchange, which allows kernels with the A extension to
           execute user code without the A extension reasonably fast.

         - Our user-visible register state now contains enough space for
           the Q extension for 128-bit floating point, as well as a few
           words to allow extensibility to future ISA extensions like
           the eventual V extension for vectors.

         - A handful of driver cleanups, but these have been split into
           separate patch sets now so I won't duplicate them here.

   (v2) A highlight of the changes since the v1 patch set includes:

         - We've split out our drivers into the right places, which
           means now there's a lot more patches. I'll be submitting
           these patches to various subsystem maintainers and including
           them in any future RISC-V patch sets until they've been
           merged.

         - The SBI console driver has been completely rewritten to use
           the HVC helpers and is now significantly smaller.

         - We've begun to use weaker barriers as opposed to just the big
           "fence". There's still some work to do here, specifically:
            - We need fences in the relaxed MMIO functions.
            - The non-relaxed MMIO functions are missing R/W bits on their fences.
            - Many AMOs need the aq and rl bits set.

         - We now have thread_info in task_struct. As a result, sscratch
           now contains TP instead of SP. This was necessary because
           thread_info is no longer on the stack.

         - A few shared routines have been added that we use instead of
           creating another arch copy"

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  RISC-V: Build Infrastructure
  RISC-V: User-facing API
  RISC-V: Paging and MMU
  RISC-V: Device, timer, IRQs, and the SBI
  RISC-V: Task implementation
  RISC-V: ELF and module implementation
  RISC-V: Generic library routines and assembly
  RISC-V: Atomic and Locking Code
  RISC-V: Init and Halt Code
  dt-bindings: RISC-V CPU Bindings
  lib: Add shared copies of some GCC library routines
  MAINTAINERS: Add RISC-V
2017-11-15 10:49:15 -08:00
Linus Torvalds
37cb8e1f8e DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
 
 - Code clean-up of overlay code and fixing for some long standing memory
   leak and race condition in applying overlays
 
 - Improvements to DT memory usage making sysfs/kobjects optional and
   skipping unflattening of disabled nodes. This is part of kernel
   tinification efforts.
 
 - Final piece of removing storing the full path for every DT node. The
   prerequisite conversion of printk's to use device_node format
   specifier happened in 4.14.
 
 - Sync with current upstream dtc. This brings additional checks to dtb
   compiling.
 
 - Binding doc tree wide removal of leading 0s from examples
 
 - RTC binding documentation adding missing devices and some
   consolidation of duplicated bindings
 
 - Vendor prefix documentation for nutsboard, Silicon Storage Technology,
   shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
   Opal Kelly, and Next Thing
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
 C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
 RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
 SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
 HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
 5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
 OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
 hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
 KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
 eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
 IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
 9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
 =jgpN
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...
2017-11-14 18:25:40 -08:00
Linus Torvalds
d6ec9d9a4d Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
 "Note that in this cycle most of the x86 topics interacted at a level
  that caused them to be merged into tip:x86/asm - but this should be a
  temporary phenomenon, hopefully we'll back to the usual patterns in
  the next merge window.

  The main changes in this cycle were:

  Hardware enablement:

   - Add support for the Intel UMIP (User Mode Instruction Prevention)
     CPU feature. This is a security feature that disables certain
     instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)

     [ Note that this is disabled by default for now, there are some
       smaller enhancements in the pipeline that I'll follow up with in
       the next 1-2 days, which allows this to be enabled by default.]

   - Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
     feature, on top of SME (Secure Memory Encryption) support that was
     added in v4.14. (Tom Lendacky, Brijesh Singh)

   - Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
     VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)

  Other changes:

   - A big series of entry code simplifications and enhancements (Andy
     Lutomirski)

   - Make the ORC unwinder default on x86 and various objtool
     enhancements. (Josh Poimboeuf)

   - 5-level paging enhancements (Kirill A. Shutemov)

   - Micro-optimize the entry code a bit (Borislav Petkov)

   - Improve the handling of interdependent CPU features in the early
     FPU init code (Andi Kleen)

   - Build system enhancements (Changbin Du, Masahiro Yamada)

   - ... plus misc enhancements, fixes and cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
  x86/build: Make the boot image generation less verbose
  selftests/x86: Add tests for the STR and SLDT instructions
  selftests/x86: Add tests for User-Mode Instruction Prevention
  x86/traps: Fix up general protection faults caused by UMIP
  x86/umip: Enable User-Mode Instruction Prevention at runtime
  x86/umip: Force a page fault when unable to copy emulated result to user
  x86/umip: Add emulation code for UMIP instructions
  x86/cpufeature: Add User-Mode Instruction Prevention definitions
  x86/insn-eval: Add support to resolve 16-bit address encodings
  x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
  x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
  x86/insn-eval: Add support to resolve 32-bit address encodings
  x86/insn-eval: Compute linear address in several utility functions
  resource: Fix resource_size.cocci warnings
  X86/KVM: Clear encryption attribute when SEV is active
  X86/KVM: Decrypt shared per-cpu variables when SEV is active
  percpu: Introduce DEFINE_PER_CPU_DECRYPTED
  x86: Add support for changing memory encryption attribute in early boot
  x86/io: Unroll string I/O when SEV is active
  x86/boot: Add early boot support when running with SEV active
  ...
2017-11-13 14:13:48 -08:00
Linus Torvalds
7832681b36 A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
 
   - We have a couple of new helper scripts.  find-unused-docs.sh from Sayli
     Karnic will point out kerneldoc comments that are not actually used in
     the documentation.  Jani Nikula's documentation-file-ref-check finds
     references to non-existing files.
 
   - A new ftrace document from Steve Rostedt.
 
   - Vinod Koul converted the dmaengine docs to RST
 
 Beyond that, it's mostly simple fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCK37AAoJEI3ONVYwIuV63nwQALeqzVwGqqTwiyRyMqgEwMQM
 je/6IurEwTHtyfwtW/mztCfNid1CLTiYZg7RET3/zlHjcUI/9VlV2dbBksGFgoQo
 muHGqhwTJjXYREwjK3FkzrGckRsVZKJgdzmZYgukCCY6Ir7IffwJKYaLOCZN1S/l
 4nBHQpt2nITo0WhdmZjaNRKOQxMA8nN5yGpOIl0neGE6ywIUMgauCCCHhxnOPVWg
 ant1HliS8WR8Tizqt9wQgLCvs5lvklsBFibZPO9LBTPG2Zy3HIO9kb+npUAh2MTl
 j0Wg39zzOFvVVErqErqUIwIuQ9IrfltHrEHYYoruTvDBXBiMKIcwApF+DS+H3WSp
 TnDu3Qif4llM5SZsZGvcjawXNnbck+7SYOe9cyqpylV3SWMWrEX1tbUv6zVuVk+7
 fencYBvEZgkJmWbjDeO/Z4S50STxRTzIxFwZgLft7g/RiHo9HvlubjjwQTqBFjxA
 fVkolN7h69MGkrD8TF19eapyujqSXaNYH0pFYo87JNOjLgYmezUHyvHd8YeZJL31
 Ll0h10HqSNVzJsjFolBMgrC3CcVjsEXdBufu0yVk45sAg9ZiMYOCpwa6Rtp+tfxa
 uIBf1LKzfWSa0ocKx7+sMJt0B/CXwU3AMtsbYGyDhFhR2r3cp1NWBHf5nisz9etD
 2Md9RDFAMLELZurewB9Q
 =H6ud
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.15' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A relatively calm cycle for the docs tree again.

  - The old driver statement has been added to the kernel docs.

  - We have a couple of new helper scripts. find-unused-docs.sh from
    Sayli Karnic will point out kerneldoc comments that are not actually
    used in the documentation. Jani Nikula's
    documentation-file-ref-check finds references to non-existing files.

  - A new ftrace document from Steve Rostedt.

  - Vinod Koul converted the dmaengine docs to RST

  Beyond that, it's mostly simple fixes.

  This set reaches outside of Documentation/ a bit more than most. In
  all cases, the changes are to comment docs, mostly from Randy, in
  places where there didn't seem to be anybody better to take them"

* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
  documentation: fb: update list of available compiled-in fonts
  MAINTAINERS: update DMAengine documentation location
  dmaengine: doc: ReSTize pxa_dma doc
  dmaengine: doc: ReSTize dmatest doc
  dmaengine: doc: ReSTize client API doc
  dmaengine: doc: ReSTize provider doc
  dmaengine: doc: Add ReST style dmaengine document
  ftrace/docs: Add documentation on how to use ftrace from within the kernel
  bug-hunting.rst: Fix an example and a typo in a Sphinx tag
  scripts: Add a script to find unused documentation
  samples: Convert timers to use timer_setup()
  documentation: kernel-api: add more info on bitmap functions
  Documentation: fix selftests related file refs
  Documentation: fix ref to power basic-pm-debugging
  Documentation: fix ref to trace stm content
  Documentation: fix ref to coccinelle content
  Documentation: fix ref to workqueue content
  Documentation: fix ref to sphinx/kerneldoc.py
  Documentation: fix locking rt-mutex doc refs
  docs: dev-tools: correct Coccinelle version number
  ...
2017-11-13 08:25:06 -08:00
Masahiro Yamada
433dc2ebe7 kbuild: do not call cc-option before KBUILD_CFLAGS initialization
Some $(call cc-option,...) are invoked very early, even before
KBUILD_CFLAGS, etc. are initialized.

The returned string from $(call cc-option,...) depends on
KBUILD_CPPFLAGS, KBUILD_CFLAGS, and GCC_PLUGINS_CFLAGS.

Since they are exported, they are not empty when the top Makefile
is recursively invoked.

The recursion occurs in several places.  For example, the top
Makefile invokes itself for silentoldconfig.  "make tinyconfig",
"make rpm-pkg" are the cases, too.

In those cases, the second call of cc-option from the same line
runs a different shell command due to non-pristine KBUILD_CFLAGS.

To get the same result all the time, KBUILD_* and GCC_PLUGINS_CFLAGS
must be initialized before any call of cc-option.  This avoids
garbage data in the .cache.mk file.

Move all calls of cc-option below the config targets because target
compiler flags are unnecessary for Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-11-13 22:54:24 +09:00
Douglas Anderson
4e56207130 kbuild: Cache a few more calls to the compiler
These are a few stragglers that I left out of the original patch to
cache calls to the C compiler ("kbuild: Add a cache for generated
variables") because they bleed out into the main Makefile and thus
uglify things a little bit.  The idea is the same here, though.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-13 22:54:23 +09:00
Douglas Anderson
3298b690b2 kbuild: Add a cache for generated variables
While timing a "no-op" build of the kernel (incrementally building the
kernel even though nothing changed) in the Chrome OS build system I
found that it was much slower than I expected.

Digging into things a bit, I found that quite a bit of the time was
spent invoking the C compiler even though we weren't actually building
anything.  Currently in the Chrome OS build system the C compiler is
called through a number of wrappers (one of which is written in
python!) and can take upwards of 100 ms to invoke even if we're not
doing anything difficult, so these invocations of the compiler were
taking a lot of time.  Worse the invocations couldn't seem to take
advantage of the multiple cores on my system.

Certainly it seems like we could make the compiler invocations in the
Chrome OS build system faster, but only to a point.  Inherently
invoking a program as big as a C compiler is a fairly heavy
operation.  Thus even if we can speed the compiler calls it made sense
to track down what was happening.

It turned out that all the compiler invocations were coming from
usages like this in the kernel's Makefile:

KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)

Due to the way cc-option and similar statements work the above
contains an implicit call to the C compiler.  ...and due to the fact
that we're storing the result in KBUILD_CFLAGS, a simply expanded
variable, the call will happen every time the Makefile is parsed, even
if there are no users of KBUILD_CFLAGS.

Rather than redoing this computation every time, it makes a lot of
sense to cache the result of all of the Makefile's compiler calls just
like we do when we compile a ".c" file to a ".o" file.  Conceptually
this is quite a simple idea.  ...and since the calls to invoke the
compiler and similar tools are centrally located in the Kbuild.include
file this doesn't even need to be super invasive.

Implementing the cache in a simple-to-use and efficient way is not
quite as simple as it first sounds, though.  To get maximum speed we
really want the cache in a format that make can natively understand
and make doesn't really have an ability to load/parse files. ...but
make _can_ import other Makefiles, so the solution is to store the
cache in Makefile format.  This requires coming up with a valid/unique
Makefile variable name for each value to be cached, but that's
solvable with some cleverness.

After this change, we'll automatically create a ".cache.mk" file that
will contain our cached variables.  We'll load this on each invocation
of make and will avoid recomputing anything that's already in our
cache.  The cache is stored in a format that it shouldn't need any
invalidation since anything that might change should affect the "key"
and any old cached value won't be used.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-13 22:54:23 +09:00
Linus Torvalds
bebc6082da Linux 4.14 2017-11-12 10:46:13 -08:00
Masahiro Yamada
74ce1896c6 kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.

Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08 11:20:24 -06:00
Ingo Molnar
b3d9a13681 Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflicts
Conflicts:
	arch/x86/kernel/cpu/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:53:06 +01:00
Linus Torvalds
39dae59d66 Linux 4.14-rc8 2017-11-05 13:05:14 -08:00
Linus Torvalds
ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Ingo Molnar
3357b0d3c7 Merge branch 'x86/mpx/prep' into x86/asm
Pick up some of the MPX commits that modify the syscall entry code,
to have a common base and to reduce conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02 10:57:24 +01:00
Linus Torvalds
0b07194bb5 Linux 4.14-rc7 2017-10-29 13:58:38 -07:00
Linus Torvalds
25a5d23b47 Kbuild fixes for v4.14 (2nd)
- fix O= building on dash
 
 - remove unused dependency in Makefile
 
 - fix default of a choice in Kconfig
 
 - fix typos and documentation style
 
 - fix command options unrecognized by sparse
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ9KBpAAoJED2LAQed4NsG85AP/RNrH/uyiLsBWfmicpTOt6Vx
 tHik2cn3TN5TBKcLcdh214zSBCPiJSp/dIvjOmIEssOqxJS001O+jlrnbB938hCn
 xVNs3aeBOx1StNB6DOplRtVe/pEIhSMMsXbIilz5a0kAn1mud73FqWmdXSRVA8zT
 JjI9gCl4pQTkv32Pz9w5HRWI8fweMnvbHfMUJhCaYcIIyN/hqfEzupPAeww4sKkg
 P5z60iif1OMlGgB9ZdWI+giblgLJOV+KoaUh181YEICenpsaf6rpdroP3X879N7i
 Y/le65xLVtc3rUZXoggNcGj04nZ7seSBHDbmicgWu0Fbj8+4nQ9mplVr1g1fLCVc
 Ml3joe24XO0PwXOrOTxCHQHRjqWSRv6cn8X9qIQqSLHkJgryxhZ5DiCGqQRxExLN
 gbKQ82UZSc4jNsOhcfcZ3ls7Ve5ao7rSUueL97acdDRhm+t0OWLmF9cQrX+eBzpj
 NOMaPvym+ucPNSRrhEgwFxDjB8dzVfO8tuYTuwX8HxQc7v5SUWuwsnurAXc3fKF2
 2D+VsU8EHk9IKDmQMIlvlj6R4bSr0bjecedA6czcRLMr83h1fCxvQxBw4UIQIzY0
 4y6QIUX7paMAo/OOqqOm10mBJM6Sr+y2JiGvL4gFhiGbCi3+xvOa7P4hRgPCe2Lq
 +FGPIdh+skAypoc/1VfA
 =0Rbk
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix O= building on dash

 - remove unused dependency in Makefile

 - fix default of a choice in Kconfig

 - fix typos and documentation style

 - fix command options unrecognized by sparse

* tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: clang: fix build failures with sparse check
  kbuild doc: a bundle of fixes on makefiles.txt
  Makefile: kselftest: fix grammar typo
  kbuild: Fix optimization level choice default
  kbuild: drop unused symverfile in Makefile.modpost
  kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
2017-10-28 11:01:57 -07:00
Nick Desaulniers
df16aaac26 kbuild: clang: remove crufty HOSTCFLAGS
When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings
that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC
targets.  These were added in commit 61163efae0 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang").

Clang does not support -fno-delete-null-pointer-checks, so adding it to
HOSTCFLAGS if HOSTCC is clang does not make sense.

It's not clear why the other warnings were disabled, and just for
HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile
with clang just fine.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-26 23:58:45 +09:00
David Lin
bb3f38c3c5 kbuild: clang: fix build failures with sparse check
We should avoid using the space character when passing arguments to
clang, because static code analysis check tool such as sparse may
misinterpret the arguments followed by spaces as build targets hence
cause the build to fail.

Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-24 10:12:02 +09:00
Ingo Molnar
f95b23a112 Merge branch 'x86/urgent' into x86/asm, to pick up dependent fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 13:30:47 +02:00
Linus Torvalds
bb176f6709 Linux 4.14-rc6 2017-10-23 06:49:47 -04:00
Linus Torvalds
33d930e59a Linux 4.14-rc5 2017-10-15 21:01:12 -04:00
Linus Torvalds
a515d05e96 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
 "A single objtool fix: avoid silently broken ORC debuginfo builds and
  error out instead"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
2017-10-14 15:09:08 -04:00
Josh Poimboeuf
11af847446 x86/unwind: Rename unwinder config options to 'CONFIG_UNWINDER_*'
Rename the unwinder config options from:

  CONFIG_ORC_UNWINDER
  CONFIG_FRAME_POINTER_UNWINDER
  CONFIG_GUESS_UNWINDER

to:

  CONFIG_UNWINDER_ORC
  CONFIG_UNWINDER_FRAME_POINTER
  CONFIG_UNWINDER_GUESS

... in order to give them a more logical config namespace.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14 10:12:12 +02:00
Jani Nikula
e8939222dc Documentation: add script and build target to check for broken file references
Add a simple script and build target to do a treewide grep for
references to files under Documentation, and report the non-existing
file in stderr. It tries to take into account punctuation not part of
the filename, and wildcards, but there are bound to be false positives
too. Mostly seems accurate though.

We've moved files around enough to make having this worthwhile.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:07:42 -06:00
Shuah Khan
8d73c512e6 Makefile: enable dochelp run from main make level
Change to enable dochelp run from main make level to make it easier to
use it.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:02:11 -06:00
Masahiro Yamada
2c1f4f1251 kbuild: re-order the code to not parse unnecessary variables
The top Makefile is divided into some sections such as mixed targets,
config targets, build targets, etc.

When we build mixed targets, Kbuild just invokes submake to process
them one by one.  In this case, compiler-related variables like CC,
KBUILD_CFLAGS, etc. are unneeded.

Check what kind of targets we are building first, and parse variables
for building only when necessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-10 10:01:29 +09:00
Masahiro Yamada
ba634eceb5 kbuild: move "_all" target out of $(KBUILD_SRC) conditional
The first "_all" occurrence around line 120 is only visible when
KBUILD_SRC is unset.

If O=... is specified, the working directory is relocated, then the
only second occurrence around line 193 is visible, that is not set
to PHONY.

Move the first one to an always visible place.  This clarifies "_all"
is our default target and it is always set to PHONY.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-10-10 10:00:47 +09:00
Masahiro Yamada
9d022c5406 kbuild: replace $(hdr-arch) with $(SRCARCH)
Since commit 5e53879008 ("sparc,sparc64: unify Makefile"), hdr-arch
and SRCARCH always match.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-10-10 10:00:47 +09:00
Masahiro Yamada
278ae60403 kbuild: link-vmlinux.sh: simplify .version increment
Since commit 1f2bfbd00e ("kbuild: link of vmlinux moved to a
script"), it is easy to increment .version without using a temporary
file .old_version.

I do not see anybody who creates the .tmp_version.  Probably it is a
left-over of commit 4e25d8bb95 ("[PATCH] kbuild: adjust .version
updating").  Just remove it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-09 23:28:46 +09:00
Linus Torvalds
8a5776a5f4 Linux 4.14-rc4 2017-10-08 20:53:29 -07:00
Randy Dunlap
bbfe63b60a Makefile: kselftest: fix grammar typo
Correct typo in kselftest help text.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-07 20:09:34 +09:00
Masahiro Yamada
028568d84d kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
I thought commit 8e9b466799 ("kbuild: use $(abspath ...) instead of
$(shell cd ... && /bin/pwd)") was a safe conversion, but it changed
the behavior.

$(abspath ...) / $(realpath ...) does not expand shell special
characters, such as '~'.

Here is a simple Makefile example:

  ---------------->8----------------
  $(info /bin/pwd: $(shell cd ~/; /bin/pwd))
  $(info abspath: $(abspath ~/))
  $(info realpath: $(realpath ~/))
  all:
          @:
  ---------------->8----------------

  $ make
  /bin/pwd: /home/masahiro
  abspath: /home/masahiro/workspace/~
  realpath:

This can be a real problem if 'make O=~/foo' is invoked from another
Makefile or primitive shell like dash.

This commit partially reverts 8e9b466799.

Fixes: 8e9b466799 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Julien Grall <julien.grall@arm.com>
2017-10-07 20:08:02 +09:00
Josh Poimboeuf
3dd40cb320 objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
With CONFIG_ORC_UNWINDER, if the user doesn't have libelf-devel
installed, and they don't see the make warning, their ORC unwinder will
be silently broken.  Upgrade the warning to an error.

Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d9dfc39fb8240998820f9efb233d283a1ee96084.1507079417.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-04 08:02:18 +02:00
Linus Torvalds
9e66317d3c Linux 4.14-rc3 2017-10-01 14:54:54 -07:00
Linus Torvalds
225d3b6748 linux-kselftest-4.14-rc3-fixes
This update consists of:
 
 - fixes to several existing tests
 - a test for regression introduced by
   b9470c2760 ("inet: kill smallest_size and smallest_port")
 - seccomp support for glibc 2.26 siginfo_t.h
 - fixes to kselftest framework and tests to run make O=dir use-case
 - fixes to silence unnecessary test output to de-clutter test results
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZy7S7AAoJEAsCRMQNDUMcAt0P/iuR279yaBF3RVqHTyXsmr/t
 RO6k4uj4XLYKTrVnV/YTu5hLCGO9fPDhprMmrTqlAGclioEyMDtRTOWDDln4TNFh
 gehbXiOTVVHlLPCOXXRwvU+RsMppgi4O2WRTBK0dnTkBdl+sTLOl4iywGyqFPB11
 O3oj1nNc8ruaxYoUMYwxiGCm1OATrngoSu/Y4mMhZPgT9MnCtZWDlg//kkrxQDHO
 UTD11zk17nBAOw2q4nw3I4un00tgN8RzIOfg9g47Az40LjWSG5c5oAgd/hArqeBv
 7pCUR1PnNKTf0RujX0nfaoQQ+bOEXqpV9GmM67HLo8Q/5e4lYxWdmSdhItPS5qtS
 ZLo1lEMOuRH7+FCQuD236llhwKVMm/+R3jnXgdJcc+SupdGCmpzZ9P8rscX1g11R
 ZDZ9+k8XOA2p7ufxSIGFEILSovn0FUMneOd3Nhwk40R7cIvSiZh+V+Xzdb6Q1K9T
 NBVtH8qvRi5TyHSNwQCDF45fC6bCM80JxGcPToOguFsQTcUL6B0pG6xhxZG73+Ut
 br+Z5y+g+JLWLeGzaBjo4LnqFpeP6w4Jb8CCrqu8BussV3BToIFCJkGX6aOggow/
 D3g03tGDeMjqFMYwn0ZCH5s5u9cicWUUC8CBvoCJp2UZaE/prsNNfRjZjfwYlrVj
 TvWPdPJtwjA/sdq/n2Hl
 =FUuY
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests

   - a test for regression introduced by b9470c2760 ("inet: kill
     smallest_size and smallest_port")

   - seccomp support for glibc 2.26 siginfo_t.h

   - fixes to kselftest framework and tests to run make O=dir use-case

   - fixes to silence unnecessary test output to de-clutter test results"

* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
  selftests: timers: set-timer-lat: fix hang when std out/err are redirected
  selftests/memfd: correct run_tests.sh permission
  selftests/seccomp: Support glibc 2.26 siginfo_t.h
  selftests: futex: Makefile: fix for loops in targets to run silently
  selftests: Makefile: fix for loops in targets to run silently
  selftests: mqueue: Use full path to run tests from Makefile
  selftests: futex: copy sub-dir test scripts for make O=dir run
  selftests: lib.mk: copy test scripts and test files for make O=dir run
  selftests: sync: kselftest and kselftest-clean fail for make O=dir case
  selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
  selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
  selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
  selftests: lib.mk: fix test executable status check to use full path
  selftests: Makefile: clear LDFLAGS for make O=dir use-case
  selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
  Makefile: kselftest and kselftest-clean fail for make O=dir case
  selftests/net: msg_zerocopy enable build with older kernel headers
  selftests: actually run the various net selftests
  selftest: add a reuseaddr test
  ...
2017-09-27 10:51:08 -07:00
Palmer Dabbelt
fbe934d69e RISC-V: Build Infrastructure
This patch contains all the build infrastructure that actually enables
the RISC-V port.  This includes Makefiles, linker scripts, and Kconfig
files.  It also contains the only top-level change, which adds RISC-V to
the list of architectures that need a sed run to produce the ARCH
variable when building locally.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26 15:26:49 -07:00
Linus Torvalds
e19b205be4 Linux 4.14-rc2 2017-09-24 16:38:56 -07:00
Shuah Khan
2bc84526d1 Makefile: kselftest and kselftest-clean fail for make O=dir case
kselftest and kselftest-clean targets fail when object directory is
specified to relocate objects. Fix it so it can find the source tree
to build from.

make O=/tmp/kselftest_top kselftest

make[1]: Entering directory '/tmp/kselftest_top'
make[2]: Entering directory '/tmp/kselftest_top'
make[2]: *** tools/testing/selftests: No such file or directory.  Stop.
make[2]: Leaving directory '/tmp/kselftest_top'
./linux-kselftest/Makefile:1185: recipe for target
'kselftest' failed
make[1]: *** [kselftest] Error 2
make[1]: Leaving directory '/tmp/kselftest_top'
Makefile:145: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-21 07:55:22 -06:00
Linus Torvalds
2bd6bf03f4 Linux 4.14-rc1 2017-09-16 15:47:51 -07:00