There are a number of leftover #include "display/..." directives that
are completely unnecessary. Remove them to make it easier to spot the
relevant ones. In one case, switch to a more specific include.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823123318.3189503-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Fixes: f6f4a0862b ("drm/i915/vlv_dsi: Add DMI quirk for backlight control issues on Lenovo Yoga Tab 3 (v2)")
Cc: stable@vger.kernel.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823075055.17198-1-hdegoede@redhat.com
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_display_params.[ch] and intel_display_debugfs_params.[ch] to
struct intel_display.
Some stragglers are left behind where needed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e5cc1744eaf4708b08303e3e7e194035d7941cc.1724342644.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When building for xe, we get the context imbalance warning as the actual
locking/unlocking is not compiled:
../drivers/gpu/drm/i915/display/intel_vblank.c:306:13: warning: context imbalance in 'intel_vblank_section_enter' - wrong count at exit
../drivers/gpu/drm/i915/display/intel_vblank.c:314:13: warning: context imbalance in 'intel_vblank_section_exit' - wrong count at exit
Fix by adding separata stubs for xe without __acquires/__releases
annotation.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/111de5bee15f408de65b19ece4b68a7ac66b30cf.1724342644.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move the stepping related macros over to display. We can proceed to
remove the compat macros from xe.
Note: Looks like we've failed to actually initialize the display
stepping for GMD ID based platforms in the xe driver. It does get set in
display runtime info, but until now the compat macro used
xe->info.step.display which was not set for GMD ID.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ce8bb94e1a801d3c345f1810837bdd1964c3af75.1724180287.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Both i915 and xe have code to identify display steppings. Start
deduplicating this by, uh, adding a third copy in display code. This is
not yet used for anything other than debug logging. We'll switch over
later.
For platforms before GMD ID, attach the mapping from PCI revision to
stepping in the platform and subplatform descriptors. This is a
considerably cleaner approach than having it completely separate.
Also add a separate field for stepping in display runtime info,
preserving the value from GMD ID.
v2: Handle NULL subdesc (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821095036.2044654-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The intel_display_step_name() is an unnecessary extra
indirection. Simplify by just adding a macro to map intel_step_name() to
xe_step_name().
We'll need to temporarily add a compat INTEL_DISPLAY_STEP() for this.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cbea7def331cc9d2438da49ae344b9987f27cd12.1724180287.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add I915_FORMAT_MOD_4_TILED_BMG_CCS and I915_FORMAT_MOD_4_TILED_LNL_CCS to possible
created modifier for new framebuffer on Xe driver.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816115229.531671-4-juhapekka.heikkila@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add Tile4 type ccs modifiers to indicate presence of compression on Xe2.
Here is defined I915_FORMAT_MOD_4_TILED_LNL_CCS which is meant for
integrated graphics with igpu related limitations
Here is also defined I915_FORMAT_MOD_4_TILED_BMG_CCS which is meant
for discrete graphics with dgpu related limitations
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816115229.531671-3-juhapekka.heikkila@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Disable bit 29 of SCLKGATE_DIS register around pps sequence
when we turn panel power on.
--v2
-Squash two commit together [Jani]
-Use IS_DISPLAY_VER [Jani]
-Fix multiline comment [Jani]
--v3
-Define register in a more appropriate place [Mitul]
--v4
-Register is already defined no need to define it again [Ville]
-Use correct WA number (lineage no.) [Dnyaneshwar]
-Fix the range on which this WA is applied [Dnyaneshwar]
Bspec: 49304
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813042807.4015214-1-suraj.kandpal@intel.com
We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b8 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_opregion.[ch] to struct intel_display.
v2:
- Fix declarations for !CONFIG_ACPI (Imre, kernel test robot)
- Pass encoder/connector directly to intel_display() (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aef94503909bbbf95f0244dc382a4d4cd050b903.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Log the address of the register that caused the timeout
interrupt by reading RMTIMEOUTREG_CAPTURE
--v2:
- Update RMTIMEOUTREG_CAPTURE naming (Suraj)
--v3:
- XeLpdp naming convention.
- Use if condition instead of else if
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807142106.1270213-1-mitulkumar.ajitkumar.golani@intel.com
With the previous cleanups, the last remaining user of __i915_printk()
is i915_probe_error(). Switch that to use drm_dbg() and drm_err()
instead, dropping the request to report bugs in the few remaining
specific cases.
It's not common for drivers to log bug filing requests to begin with,
but these cases are in init, which is most likely to be tested in CI and
least likely to be hit by end users anyway.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be9baeab281f75999e96cc7ad1c06c6680494bc1.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915_report_error() presently acts as a wrapper for __i915_printk(). In
practice, it would be better to use drm level error reporting wherever
possible, so replace all uses of i915_report_error() with the equivalent
drm_err() call. These cases are not worth having a dedicated wrapper to
also print bug reporting info. Replacing the calls leaves
i915_report_error() with no users, so remove it.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19eab020c57c0fa45acacf4e4a8077e57cd4d561.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Display Engine's DSC register values are deducted from the DSC
configuration stored in intel_crtc_state::dsc. The latter one is
dumped in a human-readable format, so dumping the register values is
redundant, remove it.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-8-imre.deak@intel.com
Replace the BPP_X16_FMT()/ARGS() helpers defined by the driver with the
equivalent FXP_Q4_FMT()/ARGS() helpers defined by DRM core.
v2: Rebase on the s/DRM_X16/FXP_Q4 change.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-6-imre.deak@intel.com
