This patch adds a test which verifies that the DSCR privilege and
problem state SPR read & write accesses while making sure that the
results are always the same irrespective of which SPR number is being
used.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test which modifies the DSCR using mtspr instruction
and verifies the change using mfspr instruction. It uses both the
privilege state SPR as well as the problem state SPR for the purpose.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test case for the system wide DSCR default value,
which when changed through it's sysfs interface must be visible to all
threads reading DSCR either through the privilege state SPR or the
problem state SPR. The DSCR value change should be immediate as well.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- early_idt_handlers[] fix that fixes the build with bleeding edge
tooling
- build warning fix on GCC 5.1
- vm86 fix plus self-test to make it harder to break it again"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode
x86/boot: Add CONFIG_PARAVIRT_SPINLOCKS quirk to arch/x86/boot/compressed/misc.h
x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Before patch ba92732e98 ('perf kmaps: Check kmaps to make code more
robust'), 'perf report' and 'perf annotate' will segfault if trace data
contains kernel module information like this:
# perf report -D -i ./perf.data
...
0 0 0x188 [0x50]: PERF_RECORD_MMAP -1/0: [0xffffffbff1018000(0xf068000) @ 0]: x [test_module]
...
# perf report -i ./perf.data --objdump=/path/to/objdump --kallsyms=/path/to/kallsyms
perf: Segmentation fault
-------- backtrace --------
/path/to/perf[0x503478]
/lib64/libc.so.6(+0x3545f)[0x7fb201f3745f]
/path/to/perf[0x499b56]
/path/to/perf(dso__load_kallsyms+0x13c)[0x49b56c]
/path/to/perf(dso__load+0x72e)[0x49c21e]
/path/to/perf(map__load+0x6e)[0x4ae9ee]
/path/to/perf(thread__find_addr_map+0x24c)[0x47deec]
/path/to/perf(perf_event__preprocess_sample+0x88)[0x47e238]
/path/to/perf[0x43ad02]
/path/to/perf[0x4b55bc]
/path/to/perf(ordered_events__flush+0xca)[0x4b57ea]
/path/to/perf[0x4b1a01]
/path/to/perf(perf_session__process_events+0x3be)[0x4b428e]
/path/to/perf(cmd_report+0xf11)[0x43bfc1]
/path/to/perf[0x474702]
/path/to/perf(main+0x5f5)[0x42de95]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fb201f23bd4]
/path/to/perf[0x42dfc4]
This is because __kmod_path__parse treats '[' leading names as kernel
name instead of names of kernel module.
If perf.data contains build information and the buildid of such modules
can be found, the dso->kernel of it will be set to DSO_TYPE_KERNEL by
__event_process_build_id(), not kernel module.
It will then be passed to dso__load() -> dso__load_kernel_sym() ->
dso__load_kcore() if --kallsyms is provided.
The refered patch adds NULL pointer checker to avoid segfault. However,
such kernel modules are still processed incorrectly.
This patch fixes __kmod_path__parse, makes it treat names like
'[test_module]' as kernel modules.
kmod-path.c is also update to reflect the above changes.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1433321541-170245-1-git-send-email-wangnan0@huawei.com
[ Fixed the merged with 0443f36b0d ("perf machine: Fix the search
for the kernel DSO on the unified list" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves list.h from tools/perf/util/include/linux/list.h to
tools/include/linux/list.h to enable other libraries use macros in it,
like libbpf which will be introduced by further patches. Since list.h
depend on poison.h, poison.h is also moved.
Both file use relative path, so one '..' is removed for each header to
make them suit for new directory.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves kernel.h from tools/perf/util/include/linux/kernel.h
to tools/include/linux/kernel.h to enable other libraries use macros in
it, like libbpf which will be introduced by further patches.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-2-git-send-email-wangnan0@huawei.com
[ Fixed up the ifdef guard to match other entries in tools/include/linux ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When unifying the user_dsos and kernel_dsos a bug was introduced by
inverting the check for dso->kernel, fix it.
Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-xnrnq0kams3s2z9ek1wjb506@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These tests were merged in parallel to the install support, update them
now to use it.
This also adds cross compile support for the VPHN test which was missing
it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
drivers/net/phy/amd-xgbe-phy.c
drivers/net/wireless/iwlwifi/Kconfig
include/net/mac80211.h
iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.
The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
The <fd979c013207> commit intruduced the perf_event_sysfs_show function
to display the event_str value of an attr in kernel/event/core.c. But
the function returns the value with a newline char.
So, if a event also carries a event.unit file, when printing the counter
data perf tool formatting goes for a spin.
That is, because of the event unit, event name is printed in the newline
because of perf_event_sysfs_show returns with a newline char.
Now fixing perf core will break API, hencing proposing a fix in the perf tool.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1433052383-21802-1-git-send-email-maddy@linux.vnet.ibm.com
[ Add spaces around operators ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark strings, which are not supposed to be changed (basedir, filename,
value), as const in function parameters.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In generic_buffer.c: sort program parameters alphabetically and provide
usage information
In lsiio.c: drop unused parameters
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In build_channel_array(), count can be initialized already during variable
declaration.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In iioutils_get_type() it is logically better fitting to have sysfsfp
assigned zero right after closing it.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Change the assignment of *is_signed in iioutils_get_type() to a one-liner,
as already done with *be.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Refactor the code in print_event() to reduce code duplication and better
reflect that the type is output unconditionally, as well as cascade the
dependency of the diff-channel. Saves a few lines of code, as well.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add error handling to calls which can indicate a major problem by
returning an error code.
This also involves to change the type of dump_devices() from void to int.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add error handling to calls which can indicate a major problem by
returning an error code.
This also sets ret to -ENOENT in iioutils_get_type() and
iioutils_get_param_float() to indicate if no matching directory entry was
found.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull turbostat tool fixes from Len Brown:
"Just one minor kernel dependency in this batch -- added a #define to
msr-index.h"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number to 4.7
tools/power turbostat: allow running without cpu0
tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
tools/power turbostat: enable turbostat to support Knights Landing (KNL)
tools/power turbostat: correctly display more than 2 threads/core
Add error handling to calls which can indicate a major problem by
returning an error code.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add error handling to calls which can indicate a major problem by
returning an error code.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add handler to catch errors on conversion of numerical arguments.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch catches errors in string allocation in generic_buffer.c,
iio_event_monitor.c, iio_utils.c and lsiio.c.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Functions _write_sysfs_int() and _write_sysfs_string() are supposed to
be called only by public wrappers, so make them static.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Previously, the return value of sscanf() was treated as an indication of
the digits it would have read. Yet, sscanf() only returns the amount of
valid matches.
Therefore, introduce a function to calculate the decimal digits of the
read number and use this one to commence a colon search, as originally
intended.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
fscanf() usually returns the number of input items successfully matched
and assigned, which can be fewer than provided (or even zero).
Add a check in iioutils_get_type() to make sure all items are matched.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Refactor process_scan() to handle signed and unsigned data, respect shifts
and the data mask for 2, 4 and 8 byte sized scan elements.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
find_type_by_name() returns a valid error code in case of an error. Pass
this code up instead of an artificial one.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Since errno contains the value of any of the defined error names, a
negation will not lead to the desired match.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move up error handling code to preserve the errno coming from ioctl(),
before it may be changed by close().
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The man-page of errno states, that errno should be saved before doing any
library call, as that call may have changed the value of errno. So, when
encountering any error, save errno first.
This patch affects generic_buffer.c, iio_event_monitor.c and iio_utils.c.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In dump_channels() the DIR *dp was left open on exit. Close it and check
for errors.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In build_channel_array(), count needs to be decreased in more places since
current->name and current->generic_name would be freed on the error path,
although they have not been allocated, yet.
This also requires to free current->name, when it is allocated, but
current->generic_name is not yet allocated.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In iio_utils.c build_channel_array() dynamically allocates the string
generic_name in the current iio_channel_info, which doesn't got freed in
case of an error.
This dynamically allocated channel-array is used by generic_buffer, and
needs to be freed on the error/exit path.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the error path, the string scan_el_dir got freed, while it was missing when
build_channel_array() finished without errors.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Make sure to free dev_dir_name in case of an error or regular exit.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
data gets allocated before buffer_access, so it should be freed in reverse
order. Otherwise, if allocating buffer_access fails, an attempt to free it
would be taken, which should not happen.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Commit 4c85935122 ("perf probe: Support
glob wildcards for function name") introduces segfault problems when
debuginfo is not available:
# perf probe 'sys_w*'
Added new events:
Segmentation fault
The first problem resides in find_probe_trace_events_from_map(). In
that function, find_probe_functions() is called to match each symbol
against glob to find the number of matching functions, but still use
map__for_each_symbol_by_name() to find 'struct symbol' for matching
functions. Unfortunately, map__for_each_symbol_by_name() does
exact matching by searching in an rbtree.
It doesn't know glob matching, and not easy for it to support it because
it use rbtree based binary search, but we are unable to ensure all names
matched by the glob (any glob passed by user) reside in one subtree.
This patch drops map__for_each_symbol_by_name(). Since there is no
rbtree again, re-matching all symbols costs a lot. This patch avoid it
by saving all matching results into an array (syms).
The second problem is the lost of tp->realname. In
__add_probe_trace_events(), if pev->point.function is glob, the event
name should be set to tev->point.realname. This patch ensures its
existence by strdup sym->name instead of leaving a NULL pointer there.
After this patch:
# perf probe 'sys_w*'
Added new events:
probe:sys_waitid (on sys_w*)
probe:sys_wait4 (on sys_w*)
probe:sys_waitpid (on sys_w*)
probe:sys_write (on sys_w*)
probe:sys_writev (on sys_w*)
You can now use it in all perf tools, such as:
perf record -e probe:sys_writev -aR sleep 1
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1432892747-232506-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test a couple of special cases in 32-bit kernels for entries
from vm86 mode. This will OOPS both old kernels due to a bug
and and 4.1-rc5 due to a regression I introduced, and it should
make sure that the SYSENTER-from-vm86-mode hack in the kernel
keeps working.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/09a9916761e0a9e42d4922f147af45a0079cc1e8.1432936374.git.luto@kernel.org
Tests: 394838c960 x86/asm/entry/32: Fix user_mode() misuses
Tests: 7ba554b5ac x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is clearly wrong output when mperf monitor runs in MAX_FREQ_SYSFS mode:
average frequency shows in kHz unit (despite the intended output to be in MHz),
and percentages for C state information are all wrong (including high/negative
values shown).
The problem is that the max_frequency read on initialization isn't used where it
should have been used on mperf_get_count_percent (to estimate the number of
ticks in the given time period), and the value we read from sysfs is in kHz, so
we must divide it to get the MHz value to use in current calculations.
While at it, also I fixed another small issues in the debug output of
max_frequency value in mperf_get_count_freq.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It was inconvenient that perf cannot be quit with SIGINT during
processing samples on TUI especially for large data files.
This was because the first argument of SLang_init_tty(), abort_char,
being 0. The manual says it's the ascii value of the control character
that will be used to generate the interrupt signal [1]. Passing -1
means to use the default value (Ctrl-C).
However, after processing samples, Ctrl-C was used to in other cases as
well - like stepping back from annotate. So recover the original
behavior after processing.
[1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow nesting into directories without Build file. Currently we force
include of the Build file, which fails the build when the Build file is
missing.
We already support empty *-in.o' objects if there's nothing in the
directory to be compiled, so we can just use it for missing Build file
cases.
Also adding this case under tests.
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin.vincent@axis.com>
Link: http://lkml.kernel.org/r/1432914178-24086-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it consistent with the other dso lifetime routines.
For instance:
struct dso *vdso__new(struct machine *machine, const char *short_name,
const char *long_name)
Becomes:
struct dso *machine__addnew_vdso(struct machine *machine, const
char *short_name, const char *long_name)
Because:
1) There is no 'struct vdso' for us to have vdso__ prefixed routines.
2) Because it will not really just create a new instance of 'struct
dso', it'll call dso__new() but it will also insert it into the
DSO's list/rbtree, and we have a method name for that: 'addnew',
just like we have dsos__addnew().
3) So it is really a 'struct machine' operation, it is the first
argument, etc.
This way the place where this is used gets consistent:
if (vdso) {
pgoff = 0;
- dso = vdso__dso_findnew(machine, thread);
+ dso = machine__findnew_vdso(machine, thread);
} else
dso = machine__findnew_dso(machine, filename);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-r3w3tvh8exm9xfz3p4tz9qbz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to machine__findnew_thread(), also prepping for refcounting and
locking, this time for struct dso instances.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-fv3tshv5o1413coh147lszjc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can, given a DSO, figure out if it is a kernel, a kernel module or
a userlevel DSO, so stop having to process two lists in several
functions.
If searching becomes an issue at some point, we can have them in a
rbtree, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-s4yb0onpdywu6dj2xl9lxi4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It never was a 'struct dso' method, so fix that by rename
dso__kernel_findnew() to machine__findnew_kernel().
At some point I'll move it all to the machine.[ch] files, for now
lets ease patch review by not moving too much stuff.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zrxmblgsg5vx0iv4rhvq2f6l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
mmap-basic fails on arm64.
4: read samples using the mmap interface: read samples using the mmap interface: FAILED!
This is because arm64 doesn't come with getpgrp() syscall. The syscall
is a BSD compatibility wrapper, Archs that don't define
__ARCH_WANT_SYS_GETPGRP do not have this. Remove it, since getpgid is
already used in the testcase.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-4-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the test being tested is now openat rather than open, rename the
files to make it explicit. The patch is separeted from the first to make
it simpler to deal with any potential conflicts in the Makefile
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-3-git-send-email-riku.voipio@linaro.org
[ Fixed it up wrt Build files ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple perf tests fail on arm64 due to missing open syscall:
2: detect open syscall event : FAILED!
open(2) is a legacy syscall, replaced with openat(2) since 2.6.16. Thus
new architectures in kernel, such as arm64, don't implement these legacy
syscalls.
The patch replaces all sys_enter_open events with sys_enter_openat,
renames the related tests and test output to avoid confusion.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-2-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Newest libunwind does support ARM64, and perf is able to utilize it
also.
This patch enables the perf test dwarf unwind for arm64.
Test result:
# ./perf test unwind
25: Test dwarf unwind : Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1427461681-72971-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-8e8rgbg3aom9uarsyqjrsctg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thread ref-counting was not done for get_main_thread() meaning that
there was a thread__get() from machine__find_thread() that was not being
paired with thread__put(). Fix that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By 'make build-test' a warning is found in probe-event.c that, after
commit 419e873828 (perf probe: Show the error reason comes from
invalid DSO) the only user of kernel_get_module_dso() is
open_debuginfo(). Which is not compiled if HAVE_DWARF_SUPPORT not set.
'make build-test' found this problem when make_minimal.
This patch moves kernel_get_module_dso() to HAVE_DWARF_SUPPORT ifdef
section.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1432779905-206143-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Assign input_name, received from program arguments, to file data
structure.
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/55685654.2010209@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
.. to allow sharing between builtin-record and builtin-top later. No
code changes, just moved code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-9-git-send-email-andi@firstfloor.org
[ Rename too generic branch.[ch] name to parse-branch-options.[ch] ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new utility function to get an function annotation out of existing
code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhancing the 'Too many events are opened.' error message with hint to
use use 'ulimit -n <limit>' command.
Before:
$ perf record -e 'sched:*,syscalls:*' ls
Error:
Too many events are opened.
Try again after reducing the number of events.
Now:
$ perf record -e 'sched:*,syscalls:*' ls
Error:
Too many events are opened.
Probably the maximum number of open file descriptors has been reached.
Hint: Try again after reducing the number of events.
Hint: Try increasing the limit with 'ulimit -n <limit>'
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432587114-14924-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have pointers to struct map instances in several places, like in the
hist_entry instances, so we need a way to know when we can destroy them,
otherwise we may either keep leaking them or end up referencing deleted
instances.
Start fixing it by reference counting them.
This patch puts the reference count for struct map in place, replacing
direct map__delete() calls with map__put() ones and then grabbing a
reference count when adding it to the maps struct where maps for a
struct thread are kept.
Next we'll grab reference counts when setting pointers to struct map
instances, in places like in the hist_entry code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wi19xczk0t2a41r1i2chuio5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. match RB_CLEAR_NODE() with RB_EMPTY_NODE(), to check that it isn't
in a rb tree at the time of its deletion.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vumvhird765id11zbx00d2r8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow concurrent access, next step: refcount struct map instances, so
that we can ditch maps->removed_maps and stop leaking threads, maps,
then struct DSO needs the same treatment.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o45w2w5dzrza38nzqxnqzhyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That for now has the maps rbtree and the list for the dead maps, that
may be still referenced from some hist_entry, etc.
This paves the way for protecting the rbtree with a lock, then refcount
the maps and finally remove the removed_maps list, as it'll not ne
anymore needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fl0fa6142pj8khj97fow3uw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0,
allowing systems to offline cpu0.
But when cpu0 is offline, turbostat will not run:
# turbostat ls
turbostat: no /dev/cpu/0/msr
This patch replaces the hard-coded use of cpu0 in turbostat
with the current cpu, allowing it to run without a cpu0.
Fewer cross-calls may also be needed due to use of current cpu,
though this hard-coding was used only for the --debug preamble.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When EPB is 0xF, turbosat was incorrectly describing it as "custom"
instead of calling it "powersave":
< cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (custom)
> cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (powersave)
Signed-off-by: Len Brown <len.brown@intel.com>
Changes mainly to account for minor differences in Knights Landing(KNL):
1. KNL supports C1 and C6 core states.
2. KNL supports PC2, PC3 and PC6 package states.
3. KNL has a different encoding of the TURBO_RATIO_LIMIT MSR
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Without this update, turbostat displays only 2 threads per core.
Some processors, such as Xeon Phi, have more.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Although it is currently possible to run the same test in parallel,
'--config "TINY01 TINY01 TINY01"' can get a bit verbose, especially
if you want to run 48 instances of TINY01 in parallel. This commit
therefore allows prefixing the Kconfig fragment with a repeat count,
for example, '--config "48*TINY01"' to run 48 instances in parallel.
At least assuming that you have 48 CPUs and also gave '--cpus 48'.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current rcutorture scripting fails to dump out errors from
"make oldconfig", so this commit addresses this issue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit updates TREE_RCU-kconfig.txt to reflect changes in RCU's
Kconfig setup. This commit also updates rcutorture's Kconfig fragments
to account for Kconfig parameters that are now driven directly off of
other Kconfig parameters.
The #CHECK# prefix tells the rcutorture scripts to take no action to try
to set the Kconfig parameter, but to check that it does in fact get set.
This is useful for verifying that Kconfig parameters that are supposed
to be automatically set do in fact get set to the required values.
Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit causes the rcutorture scripts to force RCU_EXPERT so that
these scripts can cause rcutorture to torture RCU in the various required
configurations. However, SRCU-P, TASKS03, and TREE09 retain !RCU_EXPERT
in order to ensure testing of the vanilla configuration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit updates rcutortures configuration-fragment files to account
for the move from the CONFIG_RCU_FANOUT_EXACT Kconfig parameter to the
new rcutree.rcu_fanout_exact= boot parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The TASKS01, TASKS02, and TASKS03 rcutorture config fragments currently
set CONFIG_TASKS_RCU. However, now that the value of this Kconfig
parameter is set via "select" statements, it is no longer necessary to
set it explicitly. This commit therefore removes it from the Kconfig
fragments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current rcutorture testing does not do any cleanup operations.
This works because the srcu_struct is statically allocated, but it
does represent a memory leak of the associated dynamically allocated
->per_cpu_ref per-CPU variables. However, rcutorture currently uses
a statically allocated srcu_struct, which cannot legally be passed to
cleanup_srcu_struct(). Therefore, this commit adds a second form
of srcu (called srcud) that dynamically allocates and frees the
associated per-CPU variables. This commit also adds a ->cleanup()
member to rcu_torture_ops that is invoked at the end of the test,
after ->cb_barriers(). This ->cleanup() pointer is NULL for all
existing tests, and thus only used for scrud. Finally, the SRCU-P
torture-test configuration selects scrud instead of srcu, with SRCU-N
continuing to use srcu, thereby testing both static and dynamic
srcu_struct structures.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
TREE03 has been especially effective at finding bugs lately. This commit
makes it even more effective by speeding up its CPU hotplug testing and
increasing its NR_CPUs from 8 to 16. TREE08's NR_CPUS is decreased from
16 to 8 in order to maintain the same test duration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Given that the combination of PREEMPT_RCU and HOTPLUG_CPU is producing the
most bugs lately, this commit swaps the TREE03 and TREE04 rcu_node-tree
geometries so that the test exercising PREEMPT_RCU and HOTPLUG_CPU has
three-level rather than two-level rcu_node trees.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tiny RCU supports both RCU-sched and RCU-bh, but only RCU-sched is
currently tested by the rcutorture scripts. This commit therefore
changes the TINY02 configuration to test RCU-bh, with TINY01 continuing
to test RCU-sched.
This shortcoming of the current rcutorture tests was located by mutation
testing by Iftekhar. The idea behind mutation testing is to automatically
mutate the code under test. If a given mutant is not caught by testing,
this is a hint that the testing might need to be improved, as was the
case here. Note that this is only a hint because it is possible to mutate
the code into something else that still works. For example, a mutation
that removes (say) a WARN_ON() will not normally result in a test failure.
This change resulted in the test failure caused by list mishandling,
which is fixed by the next commit.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them. This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability. A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies. Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Fix a bug in del_perf_probe_events() which returns an error (-ENOENT)
even if the probes are successfully deleted.
This happens only if the probes are on user-apps and not on kernel,
simply because it doesn't clear the previous error.
So, without this fix, we get an error even though events are being
successfully removed.
------
# ./perf probe -x ./perf del_perf_probe_events
Added new event:
probe_perf:del_perf_probe_events (on del_perf_probe_events in ...
You can now use it in all perf tools, such as:
perf record -e probe_perf:del_perf_probe_events -aR sleep 1
# ./perf probe -d \*:\*
Removed event: probe_perf:del_perf_probe_events
Error: Failed to delete events.
------
This fixes the above error.
------
# ./perf probe -d \*:\*
Removed event: probe_perf:del_perf_probe_events
------
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083725.23880.45209.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show the reason of error when dso__load* fails. This shows when user
gives wrong kernel image or wrong path.
Without this, perf probe shows an obscure message:
----
$ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
Failed to find path of kernel module.
Error: Failed to show lines.
----
With this, perf shows appropriate error message:
----
$ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
Failed to find the path for kernel: Mismatching build id
Error: Failed to show lines.
----
And:
----
$ perf probe -k /non-exist/kernel/vmlinux -L vfs_read
Failed to find the path for kernel: No such file or directory
Error: Failed to show lines.
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083718.23880.84100.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disallow PMU events intel_pt and intel_bts until the tools support them.
By default any PMU is selectable as an event but until the tools have
intel_pt and intel_bts support using them would result in no data being
recorded without any indication as to why.
Before the change:
$ perf record -e intel_bts// sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data ]
$ perf report --stdio
Error:
The perf.data file has no samples!
After the change:
$ perf record -e intel_bts// sleep 1
invalid or unsupported event: 'intel_bts//'
Run 'perf list' for a list of valid events
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432295653-13989-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes when debugging large multi-threaded applications it is helpful
to collate all of the latency numbers into one bulk record to get an
idea of what is going on.
This patch does this by merging any entries that belong to the same comm
into one entry and then spits out those totals.
I've also slightly changed the output so you can see how many threads
were merged in the processing. Here is the new default output format
-----------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
-----------------------------------------------------------------------------------------------------------
chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s
pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s
threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s
Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s
Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s
Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s
plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s
CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s
the (#) after the task is the number of tasks merged, and then if there were
no tasks merged it just shows the pid. Here is the same trace file with the -p
option to print the per-pid latency numbers
-----------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
-----------------------------------------------------------------------------------------------------------
chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s
pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s
threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s
chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s
chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s
chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s
Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s
chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct debugging experience is given by passing -Og to compiler.
Do it in a way that supports older compilers
Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Assign default value for pointers that are identified by the compiler as
non-initialized.
Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a few more remaining places, for consistency.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c2n7slwtto29wndfttdrhfrx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the way DSOs are created are normally via dsos__findnew, so that we
don't have to load the same dso multiple times for multiple maps (think
about /lib64/libc.so.6), so they may be shared and dso__delete() should
be left to be done as part of the map destruction process.
This will all be properly solved by reference counting struct dso, which
will be done soon.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gbrohe1nvkjxw3u5a1bgj3yh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use:
BUG_ON(!RB_EMPTY_NODE(&thread->rb_node));
in the thread destructor as a debugging check to find out about
possibly still referenced thread instances being deleted, to do that
we need to make sure we use RB_CLEAR_NODE() right after rb_erase(),
i.e. that we use the newly introduced rb_erase_init(), that works
just like list_del_init().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4fcqo5ypy1cjjf15ilb0hn78@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I was assuming rb_erase() was setting things up like list_del_init, but
the fact that thread__delete() was being sucessfull is because the last
thing before deleting is to remove the thread from the
machine->dead_threads list, using list_del_init(), that has the same
effect as using rb_erase_init()...
Introduce this function so that we can use it when removing objects from
rb_trees.
Then we will be able to BUG_ON(still on a list) in destructors.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-55b16mbtndjyd7zzg8nmnamx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since:
9fdbf671ba "perf tools: do not flush maps on COMM for perf report"
We have no users of this function, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hsac1t42ehtva8gut8qe6hih@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A thread moves from a rb tree to a list, but can't be on both, because
those linkage members are in a union. This is leftover from when I was
debugging thread refcounting and had nuked that union.
It is harmless duplication, as RB_CLEAR_NODE() does again what
INIT_LIST_HEAD does.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hmma9lmip6qlhzhgkhp9tzd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It really is a 'struct map' method, and since we're introducing a new
'struct maps' class, fix it to avoid confusion.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xo9ifhk53cfl30wqcuhxpnvl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using dso__data_fd() in multi-thread environment is not safe since
returned fd can be closed and/or reused anytime.
So convert it to the dso__data_get/put_fd() pair to protect the access
with lock.
The original dso__data_fd() is deprecated and kept only for testing.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems that the dso__data_fd() was needed to find a binary type
since open in data_file_size() alone used to fail.
But as it can open the dso fine now, the dso__data_fd() can go away.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dso__data_read_offset/addr() is called without prior dso__data_fd()
(or other functions which call it internally), it failed to open dso in
data_file_size() since its binary type was not identified.
However calling dso__data_fd() in dso__data_read_offset() will hurt
performance as it grabs a global lock everytime. So factor out the loop
on the binary type in dso__data_fd(), and call it from both.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It could be used somewhere, so just call map__groups_put() to make sure
we don't delete it prematurely
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dxmh8mr12i65p8h909vi88cp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have atomic.h, we should convert all of the existing
refcounts to use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-quzeuy3jwsyod6e06o39cl6y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the convention used elsewhere.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-66oo6yn8upssfeuprwy0il1q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel and sample arguments are to set iter for later use. As it
also receives an iter as another argument, just set them before calling
the function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432022650-18205-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_session__peek_event() generally leverages there being a single mmap
of the perf.data file, however on 32-bit platforms when there is more
that 32MiB of data, then there are multiple mmaps, so
perf_session__peek_event() reads from the file.
In that case a couple of bugs were exposed (note how the seg. fault
appears with >32M of data):
$ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 1000000
[ perf record: Woken up 13 times to write data ]
[ perf record: Captured and wrote 24.568 MB perf.data ]
$ perf script > /dev/null
$ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 10000000
[ perf record: Woken up 136 times to write data ]
[ perf record: Captured and wrote 270.794 MB perf.data ]
$ perf script > /dev/null
Segmentation fault (core dumped)
The wrong address was being passed to the readn() function and the
buffer size was not being checked.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libunwind feature would never detect because of the following error:
$ cat tools/build/feature/test-libunwind.make.output
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_buffer_decode'
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_uncompressed_size'
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_end'
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_buffer_decode'
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_footer_decode'
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_size'
collect2: error: ld returned 1 exit status
Fix by adding -llzma and re-ordering to match the dependencies.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parse errors can be reported in struct parse_events_error but the
pointer passed is optional and can be NULL. Ensure it is not NULL
before dereferencing it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Patch "perf tools: Add location to pmu event terms" moved declarations
for parse_events_term__num() and parse_events_term__str() so that they
were no longer visible in parse-events.y. That can result in segfaults
as the arguments no longer need match the function prototype.
Move the declarations back, changing YYLTYPE pointers to
pointers-to-void because YYLTYPE is not generated until parse-events.y
is processed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This refactors out install-bin to install-tests and install-tools so
that downstream could opt to only install the tools, and not the tests.
Signed-off-by: Nam T. Nguyen <namnguyen@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/1431974247-22275-1-git-send-email-namnguyen@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With recent debugging, I noticed that bpf_jit_disasm segfaults when
there's no debugging output from the JIT compiler to the kernel log.
Reason is that when regexec(3) doesn't match on anything, start/end
offsets are not being filled out and contain some uninitialized garbage
from stack. Thus, we need zero out offsets first.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current comment indicates it's checking for a 32-bit build
environment, but it actually checks for a 64-bit environment. Fix this.
Signed-off-by: Martin Kelly <martkell@amazon.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make 3.81 doesn't have the 'undefine' command. Using undefine
to clear LDFLAGS fails when make version 3.81 is used. Fix it
to use override to clear LDFLAGS.
Tested-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20150514151225.GH23588@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Define the exit codes with KSFT_PASS and similar so tests can use these
directly if they choose. Also enable harnesses and other tooling to use
the defines instead of hardcoding the return codes.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Enable futex tests to be built and run with the make kselftest and
associated targets.
Most of the tests require escalated privileges. These return ERROR, and
run.sh continues.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add kselftest.h to logging.h and increment the pass and fail counters as
part of the print_result routine which is called by all futex tests.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adapt the futextest Makefiles to use lib.mk macros for RUN_TESTS and
EMIT_TESTS. For now, we reuse the run.sh mechanism provided by
futextest. This doesn't provide the standard selftests: [PASS|FAIL]
format, but the tests provide very similar output already.
This results in the run_kselftest.sh script for futexes including a
single line: ./run.sh
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The futextest testsuite [1] provides functional, stress, and
performance tests for the various futex op codes. Those tests will be of
more use to futex developers if they are included with the kernel
source.
Copy the core infrastructure and the functional tests into selftests,
but adapt them for inclusion in the kernel:
- Update the Makefile to include the run_tests target, remove reference
to the performance and stress tests from the contributed sources.
- Replace my dead IBM email address with my current Intel email address.
- Remove the warrantee and write-to paragraphs from the license blurbs.
- Remove the NAME section as the filename is easily determined. ;-)
- Make the whitespace usage consistent in a couple of places.
- Cleanup various CodingStyle violations.
A future effort will explore moving the performance and stress tests
into the kernel.
1. http://git.kernel.org/cgit/linux/kernel/git/dvhart/futextest.git
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
It was reported that the alarmtimer-suspend test hangs on older
systems that don't support _ALARM clockids.
This is due to the fact that we don't check if the timer_create
fails, and thus when we suspend, the system will not programatically
resume.
Fix this by checking the timer_create call for errors.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
On the hardware I have, resume latency from an alarm is often
2-3 seconds (with a fair amount of variability due to the RTC's
single second granularity). Having four seconds be the pass/fail
bar is maybe a little too tight, so extend this to 5 seconds.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When testing on some hardware, waiting only a second before
re-triggering suspend can keep TCP connections from re-establishing
which after a number of cycles can cause TCP connections to close
while the test is running.
So extend the delay between suspend calls to 3 seconds to let
the connections stay alive.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove subdir from DEPS as it is already created at runtime. Without this,
make install fails.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The ftrace test requires the directory test.d and all of it's contents to be
present during execution. Use TEST_DIRS to ensure this is copied to the
INSTALL_PATH.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Loop over all TEST_DIRS and recursively copy them to the INSTALL_PATH. Tests
such as ftrace require a directory and all of it's contents to execute the
test properly, thus these directories and files need to be copied when we
perform an install.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit commit 5bbe3547aa ("mm: allow compaction of unevictable pages")
introduced a sysctl that allows userspace to enable scanning of locked
pages for compaction. This patch introduces a new test which fragments
main memory and attempts to allocate a number of huge pages to exercise
this compaction logic.
Tested on machines with up to 32 GB RAM. With the patch a much larger
number of huge pages can be allocated than on the kernel without the
patch.
Example output:
On a machine with 16 GB RAM:
sudo make run_tests vm
...
-----------------------
running compaction_test
-----------------------
No of huge pages allocated = 3834
[PASS]
...
Signed-off-by: Sri Jayaramappa <sjayaram@akamai.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric B Munson <emunson@akamai.com>
Reviewed-by: Eric B Munson <emunson@akamai.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If /proc/self/uid_map doesn't exist, mount test case exits
wthout any warning. Fix it to print a warning that the test
is skipped because /proc/self/uid_map doesn't exist.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch includes the timers test binaries into the .gitignore
file listing in their respective directories. This will make sure
that git ignores all of these test binaries when displaying status.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Introduce FCOPY_VERSION_1 to support kernel replying to the negotiation
message with its own version.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce VSS_OP_REGISTER1 to support kernel replying to the negotiation
message with its own version.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use /dev/vmbus/hv_vss instead of netlink.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use /dev/vmbus/hv_kvp instead of netlink.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
ones.
Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
a hideously evolved function.
New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer. The accelerometer in the same package has been supported
for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.
Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
averaging. The ideal settings for these tend to be board design specific.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uX2k
-----END PGP SIGNATURE-----
Merge tag 'iio-for-v4.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.
Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
ones.
Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
a hideously evolved function.
New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer. The accelerometer in the same package has been supported
for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.
Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
averaging. The ideal settings for these tend to be board design specific.
Conflicts:
drivers/net/ethernet/cadence/macb.c
drivers/net/phy/phy.c
include/linux/skbuff.h
net/ipv4/tcp.c
net/switchdev/switchdev.c
Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.
phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.
tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.
macb.c involved the addition of two zyncq device entries.
skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.
Signed-off-by: David S. Miller <davem@davemloft.net>
psock_fanout tests the various fanout modes. Change the test for
rollover mode to expect early rollover due to socket pressure
as implemented in 2ccdbaa6d5 ("packet: rollover lock contention
avoidance").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We really should move the sched_getcpu() to some more suitable place,
but this one-liner fixes this build problem on ancient distros like
RHEL5.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vinson Lee <vlee@twitter.com>
Link: http://lkml.kernel.org/n/tip-5yqg4p11f9uii6yremz3r35v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace strong binding of FEATURE_TESTS and FEATURE_DISPLAY by weak
binding. This patch enables other makefiles which include
tools/build/Makefile.feature enable only limited feathres to check.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1431860222-61636-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch, 'make install' installs libraries into bindir:
$ make install DESTDIR=./tree
INSTALL trace_plugins
INSTALL libtraceevent.a
INSTALL libtraceevent.so
$ find ./tree
./tree/
./tree/usr
./tree/usr/local
./tree/usr/local/bin
./tree/usr/local/bin/libtraceevent.a
./tree/usr/local/bin/libtraceevent.so
...
/usr/local/lib( or lib64) should be a better place.
This patch replaces 'bin' with libdir. For __LP64__ building, libraries
are installed to /usr/local/lib64. For other building, to
/usr/local/lib instead.
After applying this patch:
$ make install DESTDIR=./tree
INSTALL trace_plugins
INSTALL libtraceevent.a
INSTALL libtraceevent.so
$ find ./tree
./tree
./tree/usr
./tree/usr/local
./tree/usr/local/lib64
./tree/usr/local/lib64/libtraceevent.a
./tree/usr/local/lib64/traceevent
./tree/usr/local/lib64/traceevent/plugins
./tree/usr/local/lib64/traceevent/plugins/plugin_mac80211.so
./tree/usr/local/lib64/traceevent/plugins/plugin_hrtimer.so
...
./tree/usr/local/lib64/libtraceevent.so
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1431860222-61636-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Original vmlinux_path__exit() doesn't revert vmlinux_path__nr_entries to
its original state. After the while loop vmlinux_path__nr_entries
becomes -1 instead of 0.
This makes a problem that, if runs twice, during the second run
vmlinux_path__init() will set vmlinux_path[-1] to strdup("vmlinux"),
corrupts random memory.
This patch reset vmlinux_path__nr_entries to 0 after the while loop.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1431860222-61636-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dso cache is accessed in multi-thread environment, it's possible to
close other dso->data.fd during operation due to open file limit.
Protect the file descriptors using a separate mutex.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1431909055-21442-28-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dso cache is accessed during dwarf callchain unwind and it might be
processed concurrently. Protect it under dso->lock.
Note that it doesn't protect dso_cache__find(). I think it's safe to
access to the cache tree without the lock since we don't delete nodes.
It it missed an existing node due to rotation, it'll find it during
dso_cache__insert() anyway.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1431909055-21442-27-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The copyfile_offset() function is to copy source data from given offset
to a destination file with an offset. It'll be used to build an indexed
data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20150304145824.GD7519@krava.brq.redhat.com
Link: http://lkml.kernel.org/r/1431909055-21442-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The rm_rf() function does same as the shell command 'rm -rf' which
removes all directory entries recursively.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1431909055-21442-3-git-send-email-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20150130150256.GF6188@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following patches will introduce linux/bpf.h to a new libbpf library,
which requires definition of __aligned_u64. This patch add it to the
common types.h for tools.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1431676290-1230-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4c85935122 ("perf probe: Support
glob wildcards for function name") introduces a problem:
# /root/perf probe kmem_cache_free
Failed to find symbol kmem_cache_free in kernel
Error: Failed to add events.
The reason is the replacement of map__for_each_symbol_by_name() (by
map__for_each_symbol()). Although their names are similar,
map__for_each_symbol doesn't call map__load() and dso__sort_by_name()
before searching. The missing of map__load() causes this problem because
it search symbol before load dso map.
This patch ensures map__load() is called before using
map__for_each_symbol().
After this patch:
# /root/perf probe kmem_cache_free
Added new event:
probe:kmem_cache_free (on kmem_cache_free%return)
You can now use it in all perf tools, such as:
perf record -e probe:kmem_cache_free -aR sleep 1
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1431692084-46287-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull thermal fixes from Zhang Rui:
"Specifics:
- fix an issue in intel_powerclamp driver that idle injection target
is not accurately maintained on newer Intel CPUs. Package C8 to
C10 states are introduced on these CPUs but they were not included
in the package c-state residency calculation. From Jacob Pan.
- fix a problem that package c-state idle injection was missing on
Broadwell server, by adding its id to intel_powerclamp driver.
From Jacob Pan.
- a couple of small fixes and cleanups from Joe Perches, Mathias
Krause, Dan Carpenter and Anand Moon"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: tmon: fixed the 'make install' command
thermal: rockchip: fix an error code
thermal/powerclamp: fix missing newer package c-states
thermal/intel_powerclamp: add id for broadwell server
thermal/intel_powerclamp: add __init / __exit annotations
thermal: Use bool function return values of true/false not 1/0
Urgent fix for Kselftest regression introduced in 4.1-rc1
by the new x86 test due to its hard dependency on 32-bit
build environment. A set of 5 patches fix the make kselftest
run and kselftest install.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=09md
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
x86 test due to its hard dependency on 32-bit build environment.
A set of 5 patches fix the make kselftest run and kselftest install"
* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests, x86: Rework x86 target architecture detection
selftests, x86: Remove useless run_tests rule
selftests/x86: install tests
selftest/x86: have no dependency on all when cross building
selftest/x86: build both bitnesses
Currently the se_cmp and se_collapse use pointer comparison,
which is ok for for testing equality of strings. It's not ok
as comparing function for rbtree insertion, because it gives
different results based on current pointer values.
We saw test 32 (hists cumulation test) failing based on different
environment setup. Having all sort functions straightened fix the
test for us.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing %lu format strings for Dwarf_Addr type with PRIu64 as it fits
for Dwarf_Addr (defined as uint64_t) type and works also on both 32/64
bits.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431706991-15646-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have atomic.h, we should convert all of the existing
refcounts to use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-t3v2uma5digcj2tpkrs3m84u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have atomic.h, we should convert all of the existing
refcounts to use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qhpv2etncj3hfofgj1aitkyv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have atomic.h, we should convert all of the existing
refcounts to use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-onm5u3pioba1hqqhjs8on03e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Such as RHEL5, where CLOEXEC, NONBLOCK flags are not present, use a
ifdef+define approach instead to make it build on all distros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vinson Lee <vlee@twitter.com>
Link: http://lkml.kernel.org/n/tip-pioazikk9d9oz5qdeor3eldu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Where such macro is not present, so just copy its definition from
glibc's endian.h and define it if not already.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-4j90i2na07ppidt0z6cbuxr7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's a bug that perf report sometimes ignore some options on --stdio
output. This bug is triggered only if a related config variable is set.
For example, let's assume we have a following config file.
$ cat ~/.perfconfig
[call-graph]
print-type = graph
[hist]
percentage = absolute
Then, following perf config will not honor some options.
$ perf record -ag sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.199 MB perf.data (77 samples) ]
$ perf report -g none --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 77 of event 'cycles'
# Event count (approx.): 25425383
#
# Overhead Command Shared Object Symbol
# ........ ............... ....................... ..............
#
16.34% swapper [kernel.vmlinux] [k] intel_idle
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
cpu_startup_entry
...
With '-g none' option, it should not show callchains, but it still shows
callchains. However it works as expected on --tui output.
Similarly, '--percentage relative' option is not work and still shows a
absolute percentage values.
Looking at the source, I found that those setting were overwritten by
config variables when setup_pager() called. The setup_pager() is to
start a pager process so that it can manage long lines of output on the
stdio mode. But as it calls the perf_config() after parsing arguments,
the settings were overwritten regardless of command line options.
The reason it calls perf_config() is to find the 'pager_program' which
might be set by a config variable, I guess. However current perf code
does not provide the config variable for it, so it's just meaningless
IMHO. Eliminating the call makes the option working as expected.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1431529406-6762-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe currently errors out if there are any tail calls to probed
functions:
[root@rhel71be]# perf probe do_fork
Failed to find probe point in any functions.
Error: Failed to add events.
Fix this by teaching perf to ignore tail calls.
Without patch:
[root@rhel71be perf]# ./perf probe -v do_fork
probe-definition(0): do_fork symbol:do_fork file:(null) line:0 offset:0
return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
symsrc__init: build id mismatch for /boot/vmlinux.
Using /usr/lib/debug/lib/modules/3.10.0-201.el7.ppc64/vmlinux for symbols
Open Debuginfo file:
/usr/lib/debug/lib/modules/3.10.0-201.el7.ppc64/vmlinux
Try to find probe point from debuginfo.
found inline addr: 0xc0000000000bb9b0
Probe point found: do_fork+0
found inline addr: 0xc0000000000bbe20
Probe point found: kernel_thread+48
found inline addr: 0xc0000000000bbe5c
Probe point found: sys_fork+28
found inline addr: 0xc0000000000bbfac
Probe point found: sys_vfork+44
found inline addr: 0xc0000000000bc27c
Failed to find probe point in any functions.
An error occurred in debuginfo analysis (-2).
Error: Failed to add events. Reason: No such file or directory (Code: -2)
With patch:
[root@rhel71be perf]# ./perf probe -v do_fork
probe-definition(0): do_fork symbol:do_fork file:(null) line:0 offset:0
return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
symsrc__init: build id mismatch for /boot/vmlinux.
Using /usr/lib/debug/lib/modules/3.10.0-201.el7.ppc64/vmlinux for symbols
Open Debuginfo file:
/usr/lib/debug/lib/modules/3.10.0-201.el7.ppc64/vmlinux
Try to find probe point from debuginfo.
found inline addr: 0xc0000000000bb9b0
Probe point found: do_fork+0
found inline addr: 0xc0000000000bbe20
Probe point found: kernel_thread+48
found inline addr: 0xc0000000000bbe5c
Probe point found: sys_fork+28
found inline addr: 0xc0000000000bbfac
Probe point found: sys_vfork+44
found inline addr: 0xc0000000000bc27c
Ignoring tail call from SyS_clone
Found 4 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
No kprobe blacklist support, ignored
Added new events:
Writing event: p:probe/do_fork _text+768432
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
[Ignore the error about failure to write event - this kernel is missing
a patch to resolve _text properly]
The reason to ignore tail calls is that the address does not belong to
any function frame. In the example above, the address in SyS_clone is
0xc0000000000bc27c, but looking at the debug-info:
<1><830081>: Abbrev Number: 133 (DW_TAG_subprogram)
<830083> DW_AT_external : 1
<830083> DW_AT_name : (indirect string, offset: 0x3cea3): SyS_clone
<830087> DW_AT_decl_file : 7
<830088> DW_AT_decl_line : 1689
<83008a> DW_AT_prototyped : 1
<83008a> DW_AT_type : <0x8110eb>
<83008e> DW_AT_low_pc : 0xc0000000000bc270
<830096> DW_AT_high_pc : 0xc
<83009e> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<8300a0> DW_AT_GNU_all_call_sites: 1
<8300a0> DW_AT_sibling : <0x830178>
<snip>
<3><830147>: Abbrev Number: 125 (DW_TAG_GNU_call_site)
<830148> DW_AT_low_pc : 0xc0000000000bc27c
<830150> DW_AT_GNU_tail_call: 1
<830150> DW_AT_abstract_origin: <0x82e7e1>
The frame ends at 0xc0000000000bc27c. I suppose this is why this
particular call is a "tail" call. FWIW, systemtap seems to ignore these
as well and requires users to explicitly place probes at these call
sites if necessary. I print out the caller so that users know.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1430394151-15928-1-git-send-email-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. Rename the max trace_event type size to
something more descriptive and appropriate.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we try to cross compile liblockdep, even if we set the CROSS_COMPILE variable
the linker error can occur because LD is not set with CROSS_COMPILE.
This patch adds "LD" can be set automatically with CROSS_COMPILE variable so
fixes linker error problem.
Signed-off-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
We currently fail to build on a non-multilib x86_64 target. We
print a helpful error, but it's nicer to allow the build to succeed.
Fix it and improve cross-compilation support by detecting
architecture support directly and building only the relevant tests.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Now that selftests/x86 uses the kselftest infrastructure, the
run_x86_tests.sh mechanism is just in the way.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Include lib.mk and set TEST_PROGS where appropriate.
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If the CROSS_COMPILE is set remove all's dependency on all_32 and all_64.
Cc: Andy Lutomirski <luto@amacapital.net>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Using uname with the processor flag option in some cases can yield 'unknown'
so lets use the machine flag option as it is deterministic. Add a dependency
for all_32 when building on a x86 64 bit host so that both bitnesses are
built in this case.
Cc: Andy Lutomirski <luto@amacapital.net>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent
change to get it working for Sparc broke arm and arm64 platforms.
Use sysconf to determine the number of online CPUs only parsing
/proc/cpuinfo when sysconf is not available.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com
[ Made it fall back to parsing /proc when getconf not found ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When introducing reference counting for struct thread instances I forgot
to remove the synthetic threads from the machine's rbtree so that it
then the threads would have just one reference and thus the
thread__put() replacing the thread__delete() really turns into a
thread__delete() (thread->refcnt == 1 at thread__put() time) and thus
drop the thread->mg refcount, as expected by the this test.
Fix it by calling machine__remove_thread() (the counterpart of
machine__findnew_thread()) on all the synthetic threads after the
checks that involves the rbtree were done.
Before:
# perf test -v mg
30: Test thread mg sharing :
--- start ---
test child forked, pid 26995
FAILED tests/thread-mg-share.c:68 wrong refcnt (4 != 3)
test child finished with -1
---- end ----
Test thread mg sharing: FAILED!
#
After:
# perf test mg
30: Test thread mg sharing: Ok
#
Fixes: b91fc39f4a ("perf machine: Protect the machine->threads with a rwlock")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uoqq0fjei90ohhhcboz6ay33@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it is all associated with the refcount for keeping the thread
in the rbtree, it is excessive and unecessarily complex to hold a
refcont when changing machine->last_match.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-98kuesmfwtvhsrzx7ttyb0kt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help understand the failure.
[acme@zoo linux]$ perf test -v 30
30: Test thread mg sharing :
--- start ---
test child forked, pid 12275
FAILED tests/thread-mg-share.c:68 wrong refcnt (4 != 3)
test child finished with -1
---- end ----
Test thread mg sharing: FAILED!
[acme@zoo linux]$
This is under investigation, the thread__delete() calls were replaced
with thread__put(), and those cause mismatches because now we need to be
more judicious with the thread lifetime management.
I.e. previously the thread__delete() would drop the map_group refcount,
but now since thread__put doesn't call thread__delete() necessarily.
because we have other refcount holders, the map_group refcount will not
be as we expected when this test was implemented.
Will be fixed soon...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9y8e3f7ukzco5loxvnlitpfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems there's no reason to suppress per-thread event stat by -T
option when -s or -p option is used. Make it work with those options.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431351879-23798-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
WEXITSTATUS consists of the least significant 8 bits of the status
argument, so we should convert the value to signed char if we have valid
negative exit codes. And the return value of test->func() contains
negative values:
enum {
TEST_OK = 0,
TEST_FAIL = -1,
TEST_SKIP = -2,
};
Before this patch:
$ perf test -v 1
...
test child finished with 254
---- end ----
vmlinux symtab matches kallsyms: FAILED!
After this patch:
$ perf test -v 1
...
test child finished with -2
---- end ----
vmlinux symtab matches kallsyms: Skip
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431347316-30401-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Indicate to check variable location range in error message when we got
failed to find the variable.
Before this patch:
$ perf probe --add 'generic_perform_write+118 bytes'
Failed to find the location of bytes at this address.
Perhaps, it has been optimized out.
Error: Failed to add events.
After this patch:
$ perf probe --add 'generic_perform_write+118 bytes'
Failed to find the location of the 'bytes' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show 'bytes' location range.
Error: Failed to add events.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-3-git-send-email-hekuang@huawei.com
[ Improve the error message based on lkml thread ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not easy for users to get the accurate byte offset or the line
number where a local variable can be probed.
With '--range' option, local variables in the scope of the probe point
are showed with a byte offset range, and can be added according to this
range information.
For example, there are some variables in the function
generic_perform_write():
<generic_perform_write@mm/filemap.c:0>
0 ssize_t generic_perform_write(struct file *file,
1 struct iov_iter *i, loff_t pos)
2 {
3 struct address_space *mapping = file->f_mapping;
4 const struct address_space_operations *a_ops = mapping->a_ops;
...
42 status = a_ops->write_begin(file, mapping, pos, bytes, flags,
&page, &fsdata);
44 if (unlikely(status < 0))
But we fail when we try to probe the variable 'a_ops' at line 42 or 44.
$ perf probe --add 'generic_perform_write:42 a_ops'
Failed to find the location of a_ops at this address.
Perhaps, it has been optimized out.
This is because the source code do not match the assembly, so a variable
may not be available in the source code line where it appears.
After this patch, we can lookup the accurate byte offset range of a
variable, 'INV' indicates that this variable is not valid at the given
point, but available in the scope:
$ perf probe --vars 'generic_perform_write:42' --range
Available variables at generic_perform_write:42
@<generic_perform_write+141>
[INV] ssize_t written @<generic_perform_write+[324-331]>
[INV] struct address_space_operations* a_ops @<generic_perform_write+[55-61,170-176,223-246]>
[VAL] (unknown_type) fsdata @<generic_perform_write+[70-307,346-411]>
[VAL] loff_t pos @<generic_perform_write+[0-286,286-336,346-411]>
[VAL] long int status @<generic_perform_write+[83-342,346-411]>
[VAL] long unsigned int bytes @<generic_perform_write+[122-311,320-338,346-403,403-411]>
[VAL] struct address_space* mapping @<generic_perform_write+[35-344,346-411]>
[VAL] struct iov_iter* i @<generic_perform_write+[0-340,346-411]>
[VAL] struct page* page @<generic_perform_write+[70-307,346-411]>
Then it is more clear for us to add a probe with this variable:
$ perf probe --add 'generic_perform_write+170 a_ops'
Added new event:
probe:generic_perform_write (on generic_perform_write+170 with a_ops)
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct strbuf instead of bare char[] to remove the length limitation
of variables in variable_list, so they will not disappear due to
overlength, and make preparation for adding more description for
variables.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to test trace.evlist against NULL twice.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431347316-30401-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -T/--thread option is supported only on --stdio mode (at least for
now). So enforce the tty output if the option was requested.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431184784-30525-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf record -s' and 'perf report -T' should be used together to see
per-thread event counts. Document the relation of these commands.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431184784-30525-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.
Fixes: 0e11115644 ("perf kmem: Print gfp flags in human readable string")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyyvkbnkrd9g19f6ta9zfkem@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cross-compiling the IIO tools we need to opportunity to
specify a cross compiler prefix and some extra CFLAGS. This
patch enables this in the same way as for other stuff in
tools.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.
New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.
Cleanups
* st sensors - more helpful error message if device id wrong or irq request
fails, explicitly make the Block Data Update optional rather
than relying on writes to address 0 not doing anything, make interrupt
support optional (Not always wired, and not all devices actually have
an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
management, optimize power usage by powering down when possible, rename
the gpio interrupt pin to be more useful, trivial return path simplification,
trivial formatting fixes.
* isl29018 - move towards ABI compliance with a view to moving this driver
out of staging, add some brackets to ensure code works as expected. Note
there is no actual bug as the condition being tested is always true
(with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
fix a parameter sanity check that always fails (bug introduced
earlier in this series), ACPI enumeration support,
interrupt rate control support, interrupt support in general and
integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
add emissivity setting, add device tree binding documentation,
fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wyz7
-----END PGP SIGNATURE-----
Merge tag 'iio-for-v4.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, functionality and cleanups for the 4.2 cycle
New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.
New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.
Cleanups
* st sensors - more helpful error message if device id wrong or irq request
fails, explicitly make the Block Data Update optional rather
than relying on writes to address 0 not doing anything, make interrupt
support optional (Not always wired, and not all devices actually have
an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
management, optimize power usage by powering down when possible, rename
the gpio interrupt pin to be more useful, trivial return path simplification,
trivial formatting fixes.
* isl29018 - move towards ABI compliance with a view to moving this driver
out of staging, add some brackets to ensure code works as expected. Note
there is no actual bug as the condition being tested is always true
(with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
fix a parameter sanity check that always fails (bug introduced
earlier in this series), ACPI enumeration support,
interrupt rate control support, interrupt support in general and
integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
add emissivity setting, add device tree binding documentation,
fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.
Support glob wildcards for function name when adding new probes. This
will allow us to build caches of function-entry level information with
$params.
e.g.
----
# perf probe --no-inlines --add 'kmalloc* $params'
Added new events:
probe:kmalloc_slab (on kmalloc* with $params)
probe:kmalloc_large_node (on kmalloc* with $params)
probe:kmalloc_order_trace (on kmalloc* with $params)
You can now use it in all perf tools, such as:
perf record -e probe:kmalloc_order_trace -aR sleep 1
# perf probe --list
probe:kmalloc_large_node (on kmalloc_large_node@mm/slub.c with size flags node)
probe:kmalloc_order_trace (on kmalloc_order_trace@mm/slub.c with size flags order)
probe:kmalloc_slab (on kmalloc_slab@mm/slab_common.c with size flags)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010335.24812.19972.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --no-inlines(--inlines) option to avoid searching inline functions.
Searching all functions which matches glob pattern can take a long time
and find a lot of inline functions.
With this option perf-probe searches target on the non-inlined
functions.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010333.24812.86568.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce probe_conf global configuration parameters for probe-event and
probe-finder, and removes related parameters from APIs.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010330.24812.21095.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use perf_probe_event.target field for the target binary instead of
passing it as an argument.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010328.24812.67887.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wrap futex_wait around a loop and catch for EINTR.
Either a spurious wakeup occurred or a signal interrupted is, either way
we need to block again.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1431110280-20231-2-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The futex-wake benchmark only measures wakeups done within a single
process. While this has value in its own, it does not really generate
any hb->lock contention.
A new benchmark 'wake-parallel' is added, by extending the futex-wake
code such that we can measure parallel waker threads. The program output
shows the avg per-thread latency in order to complete its share of
wakeups:
Run summary [PID 13474]: blocking on 512 threads (at [private] futex 0xa88668), 8 threads waking up 64 at a time.
[Run 1]: Avg per-thread latency (waking 64/512 threads) in 0.6230 ms (+-15.31%)
[Run 2]: Avg per-thread latency (waking 64/512 threads) in 0.5175 ms (+-29.95%)
[Run 3]: Avg per-thread latency (waking 64/512 threads) in 0.7578 ms (+-18.03%)
[Run 4]: Avg per-thread latency (waking 64/512 threads) in 0.8944 ms (+-12.54%)
[Run 5]: Avg per-thread latency (waking 64/512 threads) in 1.1204 ms (+-23.85%)
Avg per-thread latency (waking 64/512 threads) in 0.7826 ms (+-9.91%)
Naturally, different combinations of numbers of blocking and waker
threads will exhibit different information.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1431110280-20231-1-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing bugs in 'perf top' where the used thread unsafe 'struct thread'
refcount implementation was falling apart because we really use two
threads.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hil2hol294u5ntcuof4jhmn6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses the arch/x86/ kernel code for x86_64/i386, fallbacking to a gcc
intrinsics implementation that has been tested in at least sparc64.
Will be used for reference counting in tools/perf.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-knfpjowhgyh6x4z0kfuk389j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.
The parisc stuff was just using the asm-generic/barrier.h, no need to
introduce a tools/arch/parisc/ tree just yet.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tfas9bs1gje0hfsvhqgrosd6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jwcs4r1lo0ld8a4ricbe0zug@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
