Commit Graph

328 Commits

Author SHA1 Message Date
Ming Lei
ba18311dff HID: usbhid: fix dead lock between open and disconect
There is no reason to hold hiddev->existancelock before
calling usb_deregister_dev, so move it out of the lock.

The patch fixes the lockdep warning below.

[ 5733.386271] ======================================================
[ 5733.386274] [ INFO: possible circular locking dependency detected ]
[ 5733.386278] 3.2.0-custom-next-20120111+ #1 Not tainted
[ 5733.386281] -------------------------------------------------------
[ 5733.386284] khubd/186 is trying to acquire lock:
[ 5733.386288]  (minor_rwsem){++++.+}, at: [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386311]
[ 5733.386312] but task is already holding lock:
[ 5733.386315]  (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid]
[ 5733.386328]
[ 5733.386329] which lock already depends on the new lock.
[ 5733.386330]
[ 5733.386333]
[ 5733.386334] the existing dependency chain (in reverse order) is:
[ 5733.386336]
[ 5733.386337] -> #1 (&hiddev->existancelock){+.+...}:
[ 5733.386346]        [<ffffffff81082d26>] lock_acquire+0xcb/0x10e
[ 5733.386357]        [<ffffffff813df961>] __mutex_lock_common+0x60/0x465
[ 5733.386366]        [<ffffffff813dfe4d>] mutex_lock_nested+0x36/0x3b
[ 5733.386371]        [<ffffffffa0094ad6>] hiddev_open+0x113/0x193 [usbhid]
[ 5733.386378]        [<ffffffffa0011971>] usb_open+0x66/0xc2 [usbcore]
[ 5733.386390]        [<ffffffff8111a8b5>] chrdev_open+0x12b/0x154
[ 5733.386402]        [<ffffffff811159a8>] __dentry_open.isra.16+0x20b/0x355
[ 5733.386408]        [<ffffffff811165dc>] nameidata_to_filp+0x43/0x4a
[ 5733.386413]        [<ffffffff81122ed5>] do_last+0x536/0x570
[ 5733.386419]        [<ffffffff8112300b>] path_openat+0xce/0x301
[ 5733.386423]        [<ffffffff81123327>] do_filp_open+0x33/0x81
[ 5733.386427]        [<ffffffff8111664d>] do_sys_open+0x6a/0xfc
[ 5733.386431]        [<ffffffff811166fb>] sys_open+0x1c/0x1e
[ 5733.386434]        [<ffffffff813e7c79>] system_call_fastpath+0x16/0x1b
[ 5733.386441]
[ 5733.386441] -> #0 (minor_rwsem){++++.+}:
[ 5733.386448]        [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74
[ 5733.386454]        [<ffffffff81082d26>] lock_acquire+0xcb/0x10e
[ 5733.386458]        [<ffffffff813e01f5>] down_write+0x44/0x77
[ 5733.386464]        [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386475]        [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid]
[ 5733.386483]        [<ffffffff8132df51>] hid_disconnect+0x3f/0x54
[ 5733.386491]        [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a
[ 5733.386496]        [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386502]        [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386507]        [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386512]        [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386519]        [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d
[ 5733.386525]        [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid]
[ 5733.386530]        [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore]
[ 5733.386542]        [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386547]        [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386552]        [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386557]        [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386562]        [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore]
[ 5733.386573]        [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore]
[ 5733.386583]        [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore]
[ 5733.386593]        [<ffffffff8105dc0f>] kthread+0x95/0x9d
[ 5733.386601]        [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10
[ 5733.386607]
[ 5733.386608] other info that might help us debug this:
[ 5733.386609]
[ 5733.386612]  Possible unsafe locking scenario:
[ 5733.386613]
[ 5733.386615]        CPU0                    CPU1
[ 5733.386618]        ----                    ----
[ 5733.386620]   lock(&hiddev->existancelock);
[ 5733.386625]                                lock(minor_rwsem);
[ 5733.386630]                                lock(&hiddev->existancelock);
[ 5733.386635]   lock(minor_rwsem);
[ 5733.386639]
[ 5733.386640]  *** DEADLOCK ***
[ 5733.386641]
[ 5733.386644] 6 locks held by khubd/186:
[ 5733.386646]  #0:  (&__lockdep_no_validate__){......}, at: [<ffffffffa00084af>] hub_thread+0x14a/0x1157 [usbcore]
[ 5733.386661]  #1:  (&__lockdep_no_validate__){......}, at: [<ffffffffa0006b77>] usb_disconnect+0x50/0x11f [usbcore]
[ 5733.386677]  #2:  (hcd->bandwidth_mutex){+.+.+.}, at: [<ffffffffa0006bc8>] usb_disconnect+0xa1/0x11f [usbcore]
[ 5733.386693]  #3:  (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d
[ 5733.386704]  #4:  (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d
[ 5733.386714]  #5:  (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid]
[ 5733.386727]
[ 5733.386727] stack backtrace:
[ 5733.386731] Pid: 186, comm: khubd Not tainted 3.2.0-custom-next-20120111+ #1
[ 5733.386734] Call Trace:
[ 5733.386741]  [<ffffffff81062881>] ? up+0x34/0x3b
[ 5733.386747]  [<ffffffff813d9ef3>] print_circular_bug+0x1f8/0x209
[ 5733.386752]  [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74
[ 5733.386756]  [<ffffffff810808b4>] ? trace_hardirqs_on_caller+0x15d/0x1a3
[ 5733.386763]  [<ffffffff81043a3f>] ? vprintk+0x3f4/0x419
[ 5733.386774]  [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386779]  [<ffffffff81082d26>] lock_acquire+0xcb/0x10e
[ 5733.386789]  [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386797]  [<ffffffff813e01f5>] down_write+0x44/0x77
[ 5733.386807]  [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386818]  [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386825]  [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid]
[ 5733.386830]  [<ffffffff8132df51>] hid_disconnect+0x3f/0x54
[ 5733.386834]  [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a
[ 5733.386839]  [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386844]  [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386848]  [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386854]  [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386859]  [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d
[ 5733.386865]  [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid]
[ 5733.386876]  [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore]
[ 5733.386882]  [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386886]  [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386890]  [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386895]  [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386905]  [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore]
[ 5733.386916]  [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore]
[ 5733.386921]  [<ffffffff813dff82>] ? __mutex_unlock_slowpath+0x130/0x141
[ 5733.386929]  [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore]
[ 5733.386935]  [<ffffffff8106a51d>] ? finish_task_switch+0x78/0x150
[ 5733.386941]  [<ffffffff8105e396>] ? __init_waitqueue_head+0x4c/0x4c
[ 5733.386950]  [<ffffffffa0008365>] ? usb_remote_wakeup+0x56/0x56 [usbcore]
[ 5733.386955]  [<ffffffff8105dc0f>] kthread+0x95/0x9d
[ 5733.386961]  [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10
[ 5733.386966]  [<ffffffff813e24b8>] ? retint_restore_args+0x13/0x13
[ 5733.386970]  [<ffffffff8105db7a>] ? __init_kthread_worker+0x55/0x55
[ 5733.386974]  [<ffffffff813e90b0>] ? gs_change+0x13/0x13

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-02 09:48:00 +01:00
Linus Torvalds
f62f61917d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  hid-input/battery: add FEATURE quirk
  hid-input/battery: remove battery_val
  hid-input/battery: power-supply type really *is* a battery
  hid-input/battery: make the battery setup common for INPUTs and FEATUREs
  hid-input/battery: deal with both FEATURE and INPUT report batteries
  hid-input/battery: add quirks for battery
  hid-input/battery: remove apparently redundant kmalloc
  hid-input: add support for HID devices reporting Battery Strength
  HID: hid-multitouch: add support 9 new Xiroku devices
  HID: multitouch: add support for 3M 32"
  HID: multitouch: add support of Atmel multitouch panels
  HID: usbhid: defer LED setting to a workqueue
  HID: usbhid: hid-core: submit queued urbs before suspend
  HID: usbhid: remove LED_ON
  HID: emsff: use symbolic name instead of hardcoded PID constant
  HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II
  HID: Kconfig: fix syntax
  HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY
  HID: multitouch: support PixArt optical touch screen
  HID: make parser more verbose about parsing errors by default
  ...

Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in
staging, moved in this branch) and similarly for the rules for same file
in drivers/staging/hv/{Kconfig,Makefile}.
2012-01-10 10:48:28 -08:00
Linus Torvalds
972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Jiri Kosina
e027372856 Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', 'upstream-fixes', 'wacom' and 'wiimote' into for-linus 2012-01-05 15:51:02 +01:00
Al Viro
2c9ede55ec switch device_get_devnode() and ->devnode() to umode_t *
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
Daniel Kurtz
4371ea8202 HID: usbhid: defer LED setting to a workqueue
Defer LED setting action to a workqueue.
This is more likely to send all LED change events in a single URB.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 11:18:35 +01:00
Daniel Kurtz
f0befcd64b HID: usbhid: hid-core: submit queued urbs before suspend
If any userspace program has opened a keyboard device, the input core
de-activates the keyboard's LEDs upon suspend().  It does this by sending
individual EV_LED[LED_X]=0 events to the underlying device driver by
directly calling the driver's registered event() handler.

The usb-hid driver event() handler processes each request by immediately
attempting to submit a CTRL URB to turn off the LED.  USB URB submission
is asynchronous.  First the URB is added to the head of the ctrl queue.
Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately
(and CTRL_RUNNING is set).  If the CTRL_RUNNING flag was already true,
then the newly queued URB is submitted in the ctrl completion handler when
all previously submitted URBs have completed.  When all queued URBs have
been submitted, the completion handler clears the CTRL_RUNNING flag.

In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get
queued, with only the first actually submitted.  Soon after input
suspend() handler finishes, the usb-hid suspend() handler gets called.
Since this is NOT a PM_EVENT_AUTO suspend, the handler sets
REPORTED_IDLE, then waits for io to complete.

Unfortunately, this usually happens while the first LED request is
actually still being processed.  Thus when the completion handler tries
to submit the second LED request it fails, since REPORTED_IDLE is
already set!  This REPORTED_IDLE check failure causes the completion
handler to complete, however without clearing the CTRL_RUNNING flag.
This, in turn, means that the suspend() handler's wait_io() condition
is never satisfied, and instead it times out after 10 seconds, aborting
the original system suspend.

This patch changes the behavior to the following:
  (1) allow completion handler to finish submitting all queued URBs, even if
      REPORTED_IDLE is set.  This guarantees that all URBs queued before the
      hid-core suspend() call will be submitted before the system is
      suspended.
  (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but
      don't submit, new URB submission requests.  These queued requests get
      submitted when resume() flushes the URB queue. This is similar to the
      existing behavior, however, any requests that arrive while the queue is
      not yet empty will still get submitted before suspend.
  (3) set the RUNNING flag when flushing the URB queue in resume().
      This keeps URBs that were queued in (2) from colliding with any new
      URBs that are being submitted during the resume process.  The new URB
      submission requests upon resume get properly queued behind the ones
      being flushed instead of the current situation where they collide,
      causing memory corruption and oopses.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 11:18:35 +01:00
Daniel Kurtz
ede6a8b239 HID: usbhid: remove LED_ON
LED_ON was defined in the original version of the hid-core autosuspend patch.
However, during review, the setting and clearing of it was redone
using ledcount.  The test was left in accidentally.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 11:18:35 +01:00
Ignaz Forster
cd07655e73 HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II
Add quirk for the Trio Linker Plus II - the adapter supports several
controllers simultaneously, generating a new HID entry for each connected
device.

Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21 00:25:33 +01:00
Aaron Tian
b7ea95ff9b HID: multitouch: support PixArt optical touch screen
This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]

Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15 11:13:41 +01:00
Willem Penninckx
a2b2c20ba2 HID: usbkbd: kill LED URB on disconnect
The LED URB was left unkilled when the USB device is disconnected.

Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 12:31:04 +01:00
Willem Penninckx
c196adf875 HID: usbkbd: synchronize LED URB submission
usb_kbd_event() and usb_kbd_led() can be called concurrently, but they are not
synchronized. They both readwrite kbd->leds, and usb_kbd_event() originally just
checked the URB status field, while urb.h states that "It [status field] should
not be examined before the URB is returned to the completion handler."

To fix this unsynchronized behavior, this patch introduces a boolean
representing whether the URB is submitted, and a spinlock.

Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 12:30:25 +01:00
Greg Kroah-Hartman
42f06a1344 USB: convert drivers/hid/* to use module_usb_driver()
This converts the drivers in drivers/hid/* to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 09:49:34 -08:00
Paul Gortmaker
ec37d321b9 hid: Fix up files needing export.h for EXPORT_SYMBOL
With module.h being implicitly everywhere via device.h, the absence
of explicitly including something for EXPORT_SYMBOL went unnoticed.
Since we are heading to fix things up and clean module.h from the
device.h file, we need to explicitly include these files now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:18 -04:00
Linus Torvalds
7e0bb71e75 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
  PM / Clocks: Remove redundant NULL checks before kfree()
  PM / Documentation: Update docs about suspend and CPU hotplug
  ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.
  ARM: mach-shmobile: sh7372 A4R support (v4)
  ARM: mach-shmobile: sh7372 A3SP support (v4)
  PM / Sleep: Mark devices involved in wakeup signaling during suspend
  PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image
  PM / Hibernate: Do not initialize static and extern variables to 0
  PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too
  PM / Hibernate: Add resumedelay kernel param in addition to resumewait
  MAINTAINERS: Update linux-pm list address
  PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs
  PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs
  PM / Hibernate: Add resumewait param to support MMC-like devices as resume file
  PM / Hibernate: Fix typo in a kerneldoc comment
  PM / Hibernate: Freeze kernel threads after preallocating memory
  PM: Update the policy on default wakeup settings
  PM / VT: Cleanup #if defined uglyness and fix compile error
  PM / Suspend: Off by one in pm_suspend()
  PM / Hibernate: Include storage keys in hibernation image on s390
  ...
2011-10-25 15:18:39 +02:00
Jiri Kosina
b3aec7b686 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/hid-core.c
	drivers/hid/hid-ids.h
2011-10-25 09:59:04 +02:00
Sean Young
1bcc20675a HID: Add device IDs for more SJOY adapters
Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro
and Super Joy Box 5 Pro. These models have support for pressure
sensitive buttons and they can force the controller to either digital
or analog mode, both of which are not supported yet.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-21 01:01:45 +02:00
Oliver Neukum
fad9fbe865 HID: usbhid: cancel timer for retry synchronously
This makes sure IO is never restarted while a reset is going on

In particular there seems to be no protection from hid_retry_timeout() calling
hid_start_in() which would start IO after hid_pre_reset() has already called
hid_cease_io() because that uses del_timer(), not del_timer_sync()

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-13 18:21:58 +02:00
Rafael J. Wysocki
d727b60659 Merge branch 'pm-runtime' into pm-for-linus
* pm-runtime:
  PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
  PM / Runtime: Replace dev_dbg() with trace_rpm_*()
  PM / Runtime: Introduce trace points for tracing rpm_* functions
  PM / Runtime: Don't run callbacks under lock for power.irq_safe set
  USB: Add wakeup info to debugging messages
  PM / Runtime: pm_runtime_idle() can be called in atomic context
  PM / Runtime: Add macro to test for runtime PM events
  PM / Runtime: Add might_sleep() to runtime PM functions
2011-10-07 23:16:55 +02:00
Dan Carpenter
9561f7faa4 HID: hiddev: potential info leak in hiddev_ioctl()
Smatch has a new check for Rosenberg type information leaks where
structs are copied to the user with uninitialized stack data in them.

In this case, the hiddev_devinfo struct has a two byte hole.

struct hiddev_devinfo {
        __u32                      bustype;              /*     0     4 */
        __u32                      busnum;               /*     4     4 */
        __u32                      devnum;               /*     8     4 */
        __u32                      ifnum;                /*    12     4 */
        __s16                      vendor;               /*    16     2 */
        __s16                      product;              /*    18     2 */
        __s16                      version;              /*    20     2 */

        /* XXX 2 bytes hole, try to pack */

        __u32                      num_applications;     /*    24     4 */

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 01:33:10 +02:00
Clemens Werther
6d1db07779 HID: add support for HuiJia USB Gamepad connector
Create each gamepad as a separate joystick

Signed-off-by: Clemens Werther <clemens.werther@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-25 15:35:14 +02:00
Jeremiah Matthey
f5e4282586 HID: usbhid: Add support for SiGma Micro chip
Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.

Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 09:44:30 +02:00
Alan Stern
5b1b0b812a PM / Runtime: Add macro to test for runtime PM events
This patch (as1482) adds a macro for testing whether or not a
pm_message value represents an autosuspend or autoresume (i.e., a
runtime PM) event.  Encapsulating this notion seems preferable to
open-coding the test all over the place.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-19 23:49:48 +02:00
Sean Young
ad395ccadb IHD: Support force feedback on MP-8866
Support force feedback on the Dual USB Force Feedback Joypad (MP-8866).

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-15 23:36:43 +02:00
Jiri Kosina
a91f423e59 Merge branches 'roccat', 'upstream' and 'wiimote' into for-linus 2011-07-22 22:47:08 +02:00
Tomoki Sekiyama
6dc1418e13 HID: yurex: recognize GeneralKeys wireless presenter as generic HID
Unfortunately, the device seems to have the same Vendor ID and Product ID
as YUREX leg-shakes sensors, and the commit 6bc235a2e2 ("USB: add driver
for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list.

I believe that we can distinguish YUREX and the Wireless Presenter by
device type.  The patch below makes the driver ignore only YUREX
(bInterfaceProtocol==0), and recognize Wireless Presenter
(bInterfaceProtocol is keyboard or mouse) as generic HID.  (I don't have
the Wireless Presenter, so not yet ested.)

** YUREX lsusb information:
Bus 002 Device 007: ID 0c45:1010 Microdia
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0c45 Microdia
   idProduct          0x1010
   bcdDevice            0.03
   iManufacturer           1 JESS
   iProduct                2 YUREX
   iSerial                 3 10000269
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      1 Boot Interface Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.10
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      31
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval              10
Device Status:     0x0002
   (Bus Powered)
   Remote Wakeup Enabled

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Reported-by: Thomas B?chler <thomas@archlinux.org>
Tested-by: Thomas B?chler <thomas@archlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-07 15:34:17 +02:00
Dan Carpenter
5c699d7d3f HID: hiddev: fix use after free in hiddev_release
There are a couple use after free bugs here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
[jkosina@suse.cz: removed already fixed hunk]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-26 14:04:40 +02:00
Jimmy Hon
e23be0a27d HID: add quirk for HyperPen 10000U
Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with
HID_QUIRK_MULTI_INPUT.

Originally the device is reporting the x,y coordinates on Z and RX. By adding
this quirk, there will be two kernel devices. The first one is muted and the
second device will report coordinates on X and Y.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24 13:51:21 +02:00
Jiri Kosina
7f77897ef2 HID: hiddev: fix potential use-after-free
Commit 6cb4b04079 ("HID: hiddev: fix race between hiddev_disconnect
and hiddev_release") made it possible to access hiddev (for unlocking
the existance mutex) once hiddev has been kfreed.

Change the order so that this can not happen (always unlock the mutex first,
it is needed only to protect access to ->exist and ->open).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24 11:43:18 +02:00
Jiri Kosina
366a2382c6 Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into for-linus 2011-05-23 12:49:25 +02:00
Jiri Kosina
6cb4b04079 HID: hiddev: fix race between hiddev_disconnect and hiddev_release
When hiddev_disconnect() runs with chardev open, it will proceed with
usbhid_close(). When userspace in parallel runs the hiddev_release(),
it sees !hiddev->exists (as it has been already set so by
hiddev_disconnect()) and kfrees hiddev while hiddev_disconnect() hasn't
finished yet.

Serialize the access to hiddev->exists and hiddev->open by existancelock.

Reported-by: mike-@cinci.rr.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 10:50:13 +02:00
Jiri Kosina
6b7b8e488b Merge branch 'master' into upstream.
This is sync with Linus' tree to receive KEY_IMAGES definition
that went in through input tree.
2011-05-18 17:06:49 +02:00
Daniel Mack
dd2ed487fd HID: 'name' and 'phys' in 'struct hid_device' can never be NULL
As they are static members of fix size, there is no need to NULL-check them.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18 13:23:31 +02:00
Peter Waechtler
06268b2a38 HID: hiddev: fix error path in hiddev_read when interrupted
hiddev_read: in case mutex_lock_interruptible will be interrupted
remove the task from the wait queue.

Signed-off-by: Peter Waechtler <pwaechtler@mac.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-29 13:53:53 +02:00
Jiri Kosina
4b5730fafb HID: add support for barcode scanners from Symbol Technologies
Barcode handheld scanners produced by Symbol Technologies (0x05e0/0x0800
and 0x05e0/0x1300) need HID_QUIRK_NOGET, otherwise their firmware exposes
trouble during enumeration/initialization.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-26 10:51:28 +02:00
Jiri Kosina
da60325d83 HID: Add support for CH Pro Throttle
CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.

Reported-by: Unavowed <unavowed@vexillium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 07:12:32 -07:00
Dan Carpenter
ac065bf214 HID: hiddev: fix brace indent
There was an extra tab so the close curly brace didn't match up with
the right if statement.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-27 11:14:40 +02:00
Linus Torvalds
7fd23a2471 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
  HID: add support for Logitech Driving Force Pro wheel
  HID: hid-ortek: remove spurious reference
  HID: add support for Ortek PKB-1700
  HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
  HID: hid-ntrig: init settle and mode check
  HID: merge hid-egalax into hid-multitouch
  HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
  HID: ntrig remove if and drop an indent
  HID: ACRUX - activate the device immediately after binding
  HID: ntrig: apply NO_INIT_REPORTS quirk
  HID: hid-magicmouse: Correct touch orientation direction
  HID: ntrig don't dereference unclaimed hidinput
  HID: Do not create input devices for feature reports
  HID: bt hidp: send Output reports using SET_REPORT on the Control channel
  HID: hid-sony.c: Fix sending Output reports to the Sixaxis
  HID: add support for Keytouch IEC 60945
  HID: Add HID Report Descriptor to sysfs
  HID: add IRTOUCH infrared USB to hid_have_special_driver
  HID: kernel oops in out_cleanup in function hidinput_connect
  HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
  ...
2011-03-18 10:35:30 -07:00
Alan Ott
b4dbde9da8 HID: Add Support for Setting and Getting Feature Reports from hidraw
Per the HID Specification, Feature reports must be sent and received on
the Configuration endpoint (EP 0) through the Set_Report/Get_Report
interfaces.  This patch adds two ioctls to hidraw to set and get feature
reports to and from the device.  Modifications were made to hidraw and
usbhid.

New hidraw ioctls:
  HIDIOCSFEATURE - Perform a Set_Report transfer of a Feature report.
  HIDIOCGFEATURE - Perform a Get_Report transfer of a Feature report.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 15:05:49 +01:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Linus Torvalds
8f685fbda4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-multitouch: minor fixes based on additional review
  HID: Switch turbox/mosart touchscreen to hid-mosart
  HID: add Add Cando touch screen 10.1-inch product id
  HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'
  HID: hid-multitouch: add support for Cypress TrueTouch panels
  HID: hid-multitouch: support for PixCir-based panels
  HID: set HID_MAX_FIELD at 128
  HID: add feature_mapping callback
2011-01-13 09:58:38 -08:00
Benjamin Tissoires
c64f6f934c HID: Switch turbox/mosart touchscreen to hid-mosart
This device used the MULTI_INPUT quirk whereas it could be used
with hid-mosart instead to support the multitouch part.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:55 +01:00
Oliver Neukum
68229689b6 HID: usbhid: base runtime PM on modern API
This patch doesn't alter functionality, but removes a dedicated kernel
thread.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Maulik Mankad <x0082077@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22 19:06:53 +01:00
Jiri Kosina
2ade0c1d9d Merge branch 'master' into upstream 2010-12-10 15:19:18 +01:00
Joe Perches
4291ee305e HID: Add and use hid_<level>: dev_<level> equivalents
Neaten current uses of dev_<level> by adding and using
hid specific hid_<level> macros.

Convert existing uses of dev_<level> uses to hid_<level>.
Convert hid-pidff printk uses to hid_<level>.

Remove err_hid and use hid_err instead.

Add missing newlines to logging messages where necessary.
Coalesce format strings.

Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt

Other miscellaneous changes:

Add const struct hid_device * argument to hid-core functions
extract() and implement() so hid_<level> can be used by them.
Fix bad indentation in hid-core hid_input_field function
that calls extract() function above.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10 15:10:38 +01:00
Valentine Barshak
33d6eb570b HID: Consolidate device existence checks in hiddev_ioctl
Currently, if the device has been removed before hiddev_ioctl(),
the -EIO is returned. If it's removed while hiddev_ioctl() is in
progress, some commands are still processed fine, others
return -ENODEV. This change takes the "existancelock" before
processing ioctl commands and releases it at the end.
If the device has been removed, always returns -ENODEV.

Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-07 15:45:50 +01:00
Valentine Barshak
1a8e8fab79 HID: Fix race between disconnect and hiddev_ioctl
A USB HID device can be disconnected at any time.
If this happens right before or while hiddev_ioctl is in progress,
the hiddev_ioctl tries to access invalid hiddev->hid pointer.
When the hid device is disconnected, the hiddev_disconnect()
ends up with a call to hid_device_release() which frees
hid_device, but doesn't set the hiddev->hid pointer to NULL.
If the deallocated memory region has been re-used by the kernel,
this can cause a crash or memory corruption.

Since disconnect can happen at any time, we can't initialize
struct hid_device *hid = hiddev->hid at the beginning of ioctl
and then use it.

This change checks hiddev->exist flag while holding
the existancelock and uses hid_device only if it exists.

Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-07 15:45:49 +01:00
Dennis Kügler
b9e4b1e0cd HID: Add support for Perixx PERIBOARD-707 (Plus)
This patch adds support for the media keys of the Perixx PERIBOARD-707 (Plus)
keyboard / remote control.

Signed-off-by: Dennis Kügler <dennis.kuegler@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-25 15:59:02 +01:00
Tracey Dent
e9229faf92 HID: usbhid: Clean up makefile (-y instead of -objs)
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is
deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 10:43:18 +01:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00