The driver explicitly bypasses APIs to register all memory once a
connection is made, and thus allows remote access to memory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SMC enables remote access to physical memory when a user
has successfully configured and established an SMC-connection until ten
minutes after the last SMC connection is closed. Because this is considered
a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in
such a case.
This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY.
This improves user awareness, but does not remove the security risk itself.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb->dev that is passed into ip_mr_input is
the loX device for VRFs. When we lookup a vif
for this dev, none is found as we do not create
vifs for loopbacks. Instead lookup a vif for the
actual device that the packet was received on,
eg the vlan.
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
cc: David Ahern <dsa@cumulusnetworks.com>
cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
cc: roopa <roopa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_ack() can call tcp_fragment() which may dededuct the
value tp->fackets_out when MSS changes. When prior_fackets
is larger than tp->fackets_out, tcp_clean_rtx_queue() can
invoke tcp_update_reordering() with negative values. This
results in absurd tp->reodering values higher than
sysctl_tcp_max_reordering.
Note that tcp_update_reordering indeeds sets tp->reordering
to min(sysctl_tcp_max_reordering, metric), but because
the comparison is signed, a negative metric always wins.
Fixes: c7caf8d3ed ("[TCP]: Fix reord detection due to snd_una covered holes")
Reported-by: Rebecca Isaacs <risaacs@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The info->target comes from userspace and it would be used directly.
So we need to add the sanity check to make sure it is a valid standard
target, although the ebtables tool has already checked it. Kernel needs
to validate anything coming from userspace.
If the target is set as an evil value, it would break the ebtables
and cause a panic. Because the non-standard target is treated as one
offset.
Now add one helper function ebt_invalid_target, and we would replace
the macro INVALID_TARGET later.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from David Miller:
1) Track alignment in BPF verifier so that legitimate programs won't be
rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
2) Make tail calls work properly in arm64 BPF JIT, from Deniel
Borkmann.
3) Make the configuration and semantics Generic XDP make more sense and
don't allow both generic XDP and a driver specific instance to be
active at the same time. Also from Daniel.
4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.
5) Fix use-after-free in VRF driver, from Gao Feng.
6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
qca_spi driver, from Stefan Wahren.
7) Always run cleanup routines in BPF samples when we get SIGTERM, from
Andy Gospodarek.
8) The mdio phy code should bring PHYs out of reset using the shared
GPIO lines before invoking bus->reset(). From Florian Fainelli.
9) Some USB descriptor access endian fixes in various drivers from
Johan Hovold.
10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
Pressman.
11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.
12) Cure netdev leak in AF_PACKET when using timestamping via control
messages. From Douglas Caetano dos Santos.
13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
Lichvar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
ldmvsw: stop the clean timer at beginning of remove
ldmvsw: unregistering netdev before disable hardware
net: netcp: fix check of requested timestamping filter
ipv6: avoid dad-failures for addresses with NODAD
qed: Fix uninitialized data in aRFS infrastructure
mdio: mux: fix device_node_continue.cocci warnings
net/packet: fix missing net_device reference release
net/mlx4_core: Use min3 to select number of MSI-X vectors
macvlan: Fix performance issues with vlan tagged packets
net: stmmac: use correct pointer when printing normal descriptor ring
net/mlx5: Use underlay QPN from the root name space
net/mlx5e: IPoIB, Only support regular RQ for now
net/mlx5e: Fix setup TC ndo
net/mlx5e: Fix ethtool pause support and advertise reporting
net/mlx5e: Use the correct pause values for ethtool advertising
vmxnet3: ensure that adapter is in proper state during force_close
sfc: revert changes to NIC revision numbers
net: ch9200: add missing USB-descriptor endianness conversions
net: irda: irda-usb: fix firmware name on big-endian hosts
net: dsa: mv88e6xxx: add default case to switch
...
Every address gets added with TENTATIVE flag even for the addresses with
IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process
we realize it's an address with NODAD and complete the process without
sending any probe. However the TENTATIVE flags stays on the
address for sometime enough to cause misinterpretation when we receive a NS.
While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED
and endup with an address that was originally configured as NODAD with
DADFAILED.
We can't avoid scheduling dad_work for addresses with NODAD but we can
avoid adding TENTATIVE flag to avoid this racy situation.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using a TX ring buffer, if an error occurs processing a control
message (e.g. invalid message), the net_device reference is not
released.
Fixes c14ac9451c ("sock: enable timestamping using control messages")
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas reports that the following incremental update using our commit
protocol doesn't work.
# nft -f incremental-update.nft
delete element ip filter client_to_any { 10.180.86.22 : goto CIn_1 }
delete chain ip filter CIn_1
... Error: Could not process rule: Device or resource busy
The existing code is not well-integrated into the commit phase protocol,
since element deletions do not result in refcount decrement from the
preparation phase. This results in bogus EBUSY errors like the one
above.
Two new functions come with this patch:
* nft_set_elem_activate() function is used from the abort path, to
restore the set element refcounting on objects that occurred from
the preparation phase.
* nft_set_elem_deactivate() that is called from nft_del_setelem() to
decrement set element refcounting on objects from the preparation
phase in the commit protocol.
The nft_data_uninit() has been renamed to nft_data_release() since this
function does not uninitialize any data store in the data register,
instead just releases the references to objects. Moreover, a new
function nft_data_hold() has been introduced to be used from
nft_set_elem_activate().
Reported-by: Andreas Schultz <aschultz@tpip.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not assume userspace always sends us NFT_DATA_VALUE for bitwise and
cmp expressions. Although NFT_DATA_VERDICT does not make any sense, it
is still possible to handcraft a netlink message using this incorrect
data type.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When dumping the elements related to a specified set, we may invoke the
nf_tables_dump_set with the NFNL_SUBSYS_NFTABLES lock not acquired. So
we should use the proper rcu operation to avoid race condition, just
like other nft dump operations.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch fixes the creation of connection tracking entry from
netlink when synproxy is used. It was missing the addition of
the synproxy extension.
This was causing kernel crashes when a conntrack entry created by
conntrackd was used after the switch of traffic from active node
to the passive node.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When looking up an iptables rule, the iptables binary compares the
aligned match and target data (XT_ALIGN). In some cases this can
exceed the actual data size to include padding bytes.
Before commit f77bc5b23f ("iptables: use match, target and data
copy_to_user helpers") the malloc()ed bytes were overwritten by the
kernel with kzalloced contents, zeroing the padding and making the
comparison succeed. After this patch, the kernel copies and clears
only data, leaving the padding bytes undefined.
Extend the clear operation from data size to aligned data size to
include the padding bytes, if any.
Padding bytes can be observed in both match and target, and the bug
triggered, by issuing a rule with match icmp and target ACCEPT:
iptables -t mangle -A INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT
iptables -t mangle -D INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT
Fixes: f77bc5b23f ("iptables: use match, target and data copy_to_user helpers")
Reported-by: Paul Moore <pmoore@redhat.com>
Reported-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
IPVS Fixes for v4.12
please consider this fix to IPVS for v4.12.
* It is a fix from Julian Anastasov to only SNAT SNAT packet replies only for
NATed connections
My understanding is that this fix is appropriate for 4.9.25, 4.10.13, 4.11
as well as the nf tree. Julian has separately posted backports for other
-stable kernels; please see:
* [PATCH 3.2.88,3.4.113 -stable 1/3] ipvs: SNAT packet replies only for
NATed connections
* [PATCH 3.10.105,3.12.73,3.16.43,4.1.39 -stable 2/3] ipvs: SNAT packet
replies only for NATed connections
* [PATCH 4.4.65 -stable 3/3] ipvs: SNAT packet replies only for NATed
connections
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We can still delete the ct helper even if it is in use, this will cause
a use-after-free error. In more detail, I mean:
# nfct helper add ssdp inet udp
# iptables -t raw -A OUTPUT -p udp -j CT --helper ssdp
# nfct helper delete ssdp //--> oops, succeed!
BUG: unable to handle kernel paging request at 000026ca
IP: 0x26ca
[...]
Call Trace:
? ipv4_helper+0x62/0x80 [nf_conntrack_ipv4]
nf_hook_slow+0x21/0xb0
ip_output+0xe9/0x100
? ip_fragment.constprop.54+0xc0/0xc0
ip_local_out+0x33/0x40
ip_send_skb+0x16/0x80
udp_send_skb+0x84/0x240
udp_sendmsg+0x35d/0xa50
So add reference count to fix this issue, if ct helper is used by
others, reject the delete request.
Apply this patch:
# nfct helper delete ssdp
nfct v1.4.3: netlink error: Device or resource busy
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
And convert module_put invocation to nf_conntrack_helper_put, this is
prepared for the followup patch, which will add a refcnt for cthelper,
so we can reject the deleting request when cthelper is in use.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We cannot setup nat info if the ct has been confirmed already, else,
different cpu may race to handle the same ct. In extreme situation,
we may hit the "BUG_ON(nf_nat_initialized(ct, maniptype))" in the
nf_nat_setup_info.
Also running the following commands will easily hit NF_CT_ASSERT in
nf_conntrack_alter_reply:
# nft flush ruleset
# ping -c 2 -W 1 1.1.1.111 &
# nft add table t
# nft add chain t c {type nat hook postrouting priority 0 \;}
# nft add rule t c snat to 4.5.6.7
WARNING: CPU: 1 PID: 10065 at net/netfilter/nf_conntrack_core.c:1472
nf_conntrack_alter_reply+0x9a/0x1a0 [nf_conntrack]
[...]
Call Trace:
nf_nat_setup_info+0xad/0x840 [nf_nat]
? deactivate_slab+0x65d/0x6c0
nft_nat_eval+0xcd/0x100 [nft_nat]
nft_do_chain+0xff/0x5d0 [nf_tables]
? mark_held_locks+0x6f/0xa0
? __local_bh_enable_ip+0x70/0xa0
? trace_hardirqs_on_caller+0x11f/0x190
? ipt_do_table+0x310/0x610
? trace_hardirqs_on+0xd/0x10
? __local_bh_enable_ip+0x70/0xa0
? ipt_do_table+0x32b/0x610
? __lock_acquire+0x2ac/0x1580
? ipt_do_table+0x32b/0x610
nft_nat_do_chain+0x65/0x80 [nft_chain_nat_ipv4]
nf_nat_ipv4_fn+0x1ae/0x240 [nf_nat_ipv4]
nf_nat_ipv4_out+0x4a/0xf0 [nf_nat_ipv4]
nft_nat_ipv4_out+0x15/0x20 [nft_chain_nat_ipv4]
nf_hook_slow+0x2c/0xf0
ip_output+0x154/0x270
So for the confirmed ct, just ignore it and return NF_ACCEPT.
Fixes: 9a08ecfe74 ("netfilter: don't attach a nat extension by default")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Not all parameters passed to ctnetlink_parse_tuple() and
ctnetlink_exp_dump_tuple() match the enum type in the signatures of these
functions. Since this is intended change the argument type of to be an
unsigned integer value.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 0ca50d12fe ("sctp: fix src address selection if using secondary
addresses") has fixed a src address selection issue when using secondary
addresses for ipv4.
Now sctp ipv6 also has the similar issue. When using a secondary address,
sctp_v6_get_dst tries to choose the saddr which has the most same bits
with the daddr by sctp_v6_addr_match_len. It may make some cases not work
as expected.
hostA:
[1] fd21:356b:459a:cf10::11 (eth1)
[2] fd21:356b:459a:cf20::11 (eth2)
hostB:
[a] fd21:356b:459a:cf30::2 (eth1)
[b] fd21:356b:459a:cf40::2 (eth2)
route from hostA to hostB:
fd21:356b:459a:cf30::/64 dev eth1 metric 1024 mtu 1500
The expected path should be:
fd21:356b:459a:cf10::11 <-> fd21:356b:459a:cf30::2
But addr[2] matches addr[a] more bits than addr[1] does, according to
sctp_v6_addr_match_len. It causes the path to be:
fd21:356b:459a:cf20::11 <-> fd21:356b:459a:cf30::2
This patch is to fix it with the same way as Marcelo's fix for sctp ipv4.
As no ip_dev_find for ipv6, this patch is to use ipv6_chk_addr to check
if the saddr is in a dev instead.
Note that for backwards compatibility, it will still do the addr_match_len
check here when no optimal is found.
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macro tipc_wait_for_cond() is embedding the macro sk_wait_event()
to fulfil its task. The latter, in turn, is evaluating the stated
condition outside the socket lock context. This is problematic if
the condition is accessing non-trivial data structures which may be
altered by incoming interrupts, as is the case with the cong_links()
linked list, used by socket to keep track of the current set of
congested links. We sometimes see crashes when this list is accessed
by a condition function at the same time as a SOCK_WAKEUP interrupt
is removing an element from the list.
We fix this by expanding selected parts of sk_wait_event() into the
outer macro, while ensuring that all evaluations of a given condition
are performed under socket lock protection.
Fixes: commit 365ad353c2 ("tipc: reduce risk of user starvation during link congestion")
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 59cc1f61f0 ("net: sched: convert qdisc linked list to
hashtable") we missed the opportunity to considerably speed up
tc_dump_tclass_root() if a qdisc handle is provided by user.
Instead of iterating all the qdiscs, use qdisc_match_from_root()
to directly get the one we look for.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a bug in splitting an SKB during SACK
processing. Specifically if an skb contains multiple
packets and is only partially sacked in the higher sequences,
tcp_match_sack_to_skb() splits the skb and marks the second fragment
as SACKed.
The current code further attempts rounding up the first fragment
to MSS boundaries. But it misses a boundary condition when the
rounded-up fragment size (pkt_len) is exactly skb size. Spliting
such an skb is pointless and causses a kernel warning and aborts
the SACK processing. This patch universally checks such over-split
before calling tcp_fragment to prevent these unnecessary warnings.
Fixes: adb92db857 ("tcp: Make SACK code to split only at mss boundaries")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I should have known that lowering skb->truesize was dangerous :/
In case packets are not leaving the host via a standard Ethernet device,
but looped back to local sockets, bad things can happen, as reported
by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 )
So instead of tweaking skb->truesize, lets change skb->destructor
and keep a reference on the owner socket via its sk_refcnt.
Fixes: f2f872f927 ("netem: Introduce skb_orphan_partial() helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michael Madsen <mkm@nabto.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While working on the iproute2 generic XDP frontend, I noticed that
as of right now it's possible to have native *and* generic XDP
programs loaded both at the same time for the case when a driver
supports native XDP.
The intended model for generic XDP from b5cdae3291 ("net: Generic
XDP") is, however, that only one out of the two can be present at
once which is also indicated as such in the XDP netlink dump part.
The main rationale for generic XDP is to ease accessibility (in
case a driver does not yet have XDP support) and to generically
provide a semantical model as an example for driver developers
wanting to add XDP support. The generic XDP option for an XDP
aware driver can still be useful for comparing and testing both
implementations.
However, it is not intended to have a second XDP processing stage
or layer with exactly the same functionality of the first native
stage. Only reason could be to have a partial fallback for future
XDP features that are not supported yet in the native implementation
and we probably also shouldn't strive for such fallback and instead
encourage native feature support in the first place. Given there's
currently no such fallback issue or use case, lets not go there yet
if we don't need to.
Therefore, change semantics for loading XDP and bail out if the
user tries to load a generic XDP program when a native one is
present and vice versa. Another alternative to bailing out would
be to handle the transition from one flavor to another gracefully,
but that would require to bring the device down, exchange both
types of programs, and bring it up again in order to avoid a tiny
window where a packet could hit both hooks. Given this complicates
the logic for just a debugging feature in the native case, I went
with the simpler variant.
For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291
and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all
or just a subset of flags that were used for loading the XDP prog
is suboptimal in the long run since not all flags are useful for
dumping and if we start to reuse the same flag definitions for
load and dump, then we'll waste bit space. What we really just
want is to dump the mode for now.
Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0),
a program is running at the native driver layer (1). Thus, add a
mode that says that a program is running at generic XDP layer (2).
Applications will handle this fine in that older binaries will
just indicate that something is attached at XDP layer, effectively
this is similar to IFLA_XDP_FLAGS attr that we would have had
modulo the redundancy.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit b5cdae3291 ("net: Generic XDP") we automatically fall
back to a generic XDP variant if the driver does not support native
XDP. Allow for an option where the user can specify that always the
native XDP variant should be selected and in case it's not supported
by a driver, just bail out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like commit 657831ffc3 ("dccp/tcp: do not inherit mc_list from parent")
we should clear ipv6_mc_list etc. for IPv6 sockets too.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bugfixes.
-----BEGIN PGP SIGNATURE-----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=Rtl/
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that
GFP_NOFS is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes
-----BEGIN PGP SIGNATURE-----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=7Nm2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that GFP_NOFS
is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes"
* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
NFSv4.1: Work around a Linux server bug...
NFS append COMMIT after synchronous COPY
NFSv4: Fix exclusive create attributes encoding
NFSv4: Fix an rcu lock leak
nfs: use kmap/kunmap directly
NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
pNFS: Fix a deadlock when coalescing writes and returning the layout
pNFS: Don't clear the layout return info if there are segments to return
pNFS: Ensure we commit the layout if it has been invalidated
pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
pNFS: Ensure we check layout validity before marking it for return
NFS4.1 handle interrupted slot reuse from ERR_DELAY
NFSv4: check return value of xdr_inline_decode
nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
...
A bunch of changes to virtio, most affecting virtio net.
ptr_ring batched zeroing - first of batching enhancements
that seems ready.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZEceWAAoJECgfDbjSjVRpg8YIAIbB1UJZkrHh/fdCQjM2O53T
ESS62W91LBT+weYH/N79RrfnGWzDOHrCQ8Or1nAKQZx2vU1aroqYXeJ9o0liRBYr
hGZB1/bg8obA5XkKUfME2+XClakvuXABUJbky08iDL9nILlrvIVLoUgZ9ouL0vTj
oUv4n6jtguNFV7tk/injGNRparEVdcefX0dbPxXomx5tSeD2fOE96/Q4q2eD3f7r
NHD4DailEJC7ndJGa6b4M9g8shkXzgEnSw+OJHpcJcxCnAzkVT94vsU7OluiDvmG
bfdGZNb0ohDYZLbJDR8aiMkoad8bIVLyGlhqnMBiZQEOF4oiWM9UJLvp5Lq9g7A=
=Sb7L
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Fixes, cleanups, performance
A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
batched zeroing - first of batching enhancements that seems ready."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
s390/virtio: change maintainership
tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
virtio_net: tidy a couple debug statements
ptr_ring: support testing different batching sizes
ringtest: support test specific parameters
ptr_ring: batch ring zeroing
virtio: virtio_driver doc
virtio_net: don't reset twice on XDP on/off
virtio_net: fix support for small rings
virtio_net: reduce alignment for buffers
virtio_net: rework mergeable buffer handling
virtio_net: allow specifying context for rx
virtio: allow extra context per descriptor
tools/virtio: fix build breakage
virtio: add context flag to find vqs
virtio: wrap find_vqs
ringtest: fix an assert statement
Pull RCU updates from Ingo Molnar:
"The main changes are:
- Debloat RCU headers
- Parallelize SRCU callback handling (plus overlapping patches)
- Improve the performance of Tree SRCU on a CPU-hotplug stress test
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Open-code the rcu_cblist_n_lazy_cbs() function
rcu: Open-code the rcu_cblist_n_cbs() function
rcu: Open-code the rcu_cblist_empty() function
rcu: Separately compile large rcu_segcblist functions
srcu: Debloat the <linux/rcu_segcblist.h> header
srcu: Adjust default auto-expediting holdoff
srcu: Specify auto-expedite holdoff time
srcu: Expedite first synchronize_srcu() when idle
srcu: Expedited grace periods with reduced memory contention
srcu: Make rcutorture writer stalls print SRCU GP state
srcu: Exact tracking of srcu_data structures containing callbacks
srcu: Make SRCU be built by default
srcu: Fix Kconfig botch when SRCU not selected
rcu: Make non-preemptive schedule be Tasks RCU quiescent state
srcu: Expedite srcu_schedule_cbs_snp() callback invocation
srcu: Parallelize callback handling
kvm: Move srcu_struct fields to end of struct kvm
rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
rcu: Use true/false in assignment to bool
rcu: Use bool value directly
...
lock transfers from myself and the long awaited -ENOSPC handling series
from Jeff. The former will allow rbd users to take advantage of
exclusive lock's built-in blacklist/break-lock functionality while
staying in control of who owns the lock. With the latter in place, we
will abort filesystem writes on -ENOSPC instead of having them block
indefinitely.
Beyond that we've got the usual pile of filesystem fixes from Zheng,
some refcount_t conversion patches from Elena and a patch for an
ancient open() flags handling bug from Alexander.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJZEt/kAAoJEEp/3jgCEfOLpzAIAIld0N06DuHKG2F9mHEnLeGl
Y60BZ3Ajo32i9qPT/u9ntI99ZMlkuHcNWg6WpCCh8umbwk2eiAKRP/KcfGcWmmp9
EHj9COCmBR9TRM1pNS1lSMzljDnxf9sQmbIO9cwMQBUya5g19O0OpApzxF1YQhCR
V9B/FYV5IXELC3b/NH45oeDAD9oy/WgwbhQ2feTBQJmzIVJx+Je9hdhR1PH1rI06
ysyg3VujnUi/hoDhvPTBznNOxnHx/HQEecHH8b01MkbaCgxPH88jsUK/h7PYF3Gh
DE/sCN69HXeu1D/al3zKoZdahsJ5GWkj9Q+vvBoQJm+ZPsndC+qpgSj761n9v38=
=vamy
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The two main items are support for disabling automatic rbd exclusive
lock transfers from myself and the long awaited -ENOSPC handling
series from Jeff.
The former will allow rbd users to take advantage of exclusive lock's
built-in blacklist/break-lock functionality while staying in control
of who owns the lock. With the latter in place, we will abort
filesystem writes on -ENOSPC instead of having them block
indefinitely.
Beyond that we've got the usual pile of filesystem fixes from Zheng,
some refcount_t conversion patches from Elena and a patch for an
ancient open() flags handling bug from Alexander"
* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
ceph: fix memory leak in __ceph_setxattr()
ceph: fix file open flags on ppc64
ceph: choose readdir frag based on previous readdir reply
rbd: exclusive map option
rbd: return ResponseMessage result from rbd_handle_request_lock()
rbd: kill rbd_is_lock_supported()
rbd: support updating the lock cookie without releasing the lock
rbd: store lock cookie
rbd: ignore unlock errors
rbd: fix error handling around rbd_init_disk()
rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
ceph: when seeing write errors on an inode, switch to sync writes
Revert "ceph: SetPageError() for writeback pages if writepages fails"
ceph: handle epoch barriers in cap messages
libceph: add an epoch_barrier field to struct ceph_osd_client
libceph: abort already submitted but abortable requests when map or pool goes full
libceph: allow requests to return immediately on full conditions if caller wishes
libceph: remove req->r_replay_version
ceph: make seeky readdir more efficient
...
Pull networking fixes from David Miller:
1) Fix multiqueue in stmmac driver on PCI, from Andy Shevchenko.
2) cdc_ncm doesn't actually fully zero out the padding area is
allocates on TX, from Jim Baxter.
3) Don't leak map addresses in BPF verifier, from Daniel Borkmann.
4) If we randomize TCP timestamps, we have to do it everywhere
including SYN cookies. From Eric Dumazet.
5) Fix "ethtool -S" crash in aquantia driver, from Pavel Belous.
6) Fix allocation size for ntp filter bitmap in bnxt_en driver, from
Dan Carpenter.
7) Add missing memory allocation return value check to DSA loop driver,
from Christophe Jaillet.
8) Fix XDP leak on driver unload in qed driver, from Suddarsana Reddy
Kalluru.
9) Don't inherit MC list from parent inet connection sockets, another
syzkaller spotted gem. Fix from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
dccp/tcp: do not inherit mc_list from parent
qede: Split PF/VF ndos.
qed: Correct doorbell configuration for !4Kb pages
qed: Tell QM the number of tasks
qed: Fix VF removal sequence
qede: Fix XDP memory leak on unload
net/mlx4_core: Reduce harmless SRIOV error message to debug level
net/mlx4_en: Avoid adding steering rules with invalid ring
net/mlx4_en: Change the error print to debug print
drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparison
DECnet: Use container_of() for embedded struct
Revert "ipv4: restore rt->fi for reference counting"
net: mdio-mux: bcm-iproc: call mdiobus_free() in error path
net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf
net: cdc_ncm: Fix TX zero padding
stmmac: pci: split out common_default_data() helper
stmmac: pci: RX queue routing configuration
stmmac: pci: TX and RX queue priority configuration
stmmac: pci: set default number of rx and tx queues
...
syzkaller found a way to trigger double frees from ip_mc_drop_socket()
It turns out that leave a copy of parent mc_list at accept() time,
which is very bad.
Very similar to commit 8b485ce698 ("tcp: do not inherit
fastopen_req from parent")
Initial report from Pray3r, completed by Andrey one.
Thanks a lot to them !
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Pray3r <pray3r.z@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of a direct cross-type cast, use conatiner_of() to locate
the embedded structure, even in the face of future struct layout
randomization.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 82486aa6f1.
As implemented, this causes dangling netdevice refs.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We now have memalloc_noreclaim_{save,restore} helpers for robust setting
and clearing of PF_MEMALLOC. Let's convert the code which was using the
generic tsk_restore_flags(). No functional change.
[vbabka@suse.cz: in net/core/sock.c the hunk is missing]
Link: http://lkml.kernel.org/r/20170405074700.29871-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Wouter Verhelst <w@uter.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME is not y2038 safe. The macro will be deleted and all the
references to it will be replaced by ktime_get_* apis.
struct timespec is also not y2038 safe. Retain timespec for timestamp
representation here as ceph uses it internally everywhere. These
references will be changed to use struct timespec64 in a separate patch.
The current_fs_time() api is being changed to use vfs struct inode* as
an argument instead of struct super_block*.
Set the new mds client request r_stamp field using ktime_get_real_ts()
instead of using current_fs_time().
Also, since r_stamp is used as mtime on the server, use timespec_trunc()
to truncate the timestamp, using the right granularity from the
superblock.
This api will be transitioned to be y2038 safe along with vfs.
Link: http://lkml.kernel.org/r/1491613030-11599-5-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
M: Ilya Dryomov <idryomov@gmail.com>
M: "Yan, Zheng" <zyan@redhat.com>
M: Sage Weil <sage@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While examining output from trial builds with -Wformat-security enabled,
many strings were found that should be defined as "const", or as a char
array instead of char pointer. This makes some static analysis easier,
by producing fewer false positives.
As these are all trivial changes, it seemed best to put them all in a
single patch rather than chopping them up per maintainer.
Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c]
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Daode Huang <huangdaode@hisilicon.com>
Cc: Qianqian Xie <xieqianqian@huawei.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: Jason Litzinger <jlitzingerdev@gmail.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__vmalloc* allows users to provide gfp flags for the underlying
allocation. This API is quite popular
$ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l
77
The only problem is that many people are not aware that they really want
to give __GFP_HIGHMEM along with other flags because there is really no
reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages
which are mapped to the kernel vmalloc space. About half of users don't
use this flag, though. This signals that we make the API unnecessarily
too complex.
This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to
be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM
are simplified and drop the flag.
Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Cristopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fq_alloc_node, alloc_netdev_mqs and netif_alloc* open code kmalloc with
vmalloc fallback. Use the kvmalloc variant instead. Keep the
__GFP_REPEAT flag based on explanation from Eric:
"At the time, tests on the hardware I had in my labs showed that
vmalloc() could deliver pages spread all over the memory and that was
a small penalty (once memory is fragmented enough, not at boot time)"
The way how the code is constructed means, however, that we prefer to go
and hit the OOM killer before we fall back to the vmalloc for requests
<=32kB (with 4kB pages) in the current code. This is rather disruptive
for something that can be achived with the fallback. On the other hand
__GFP_REPEAT doesn't have any useful semantic for these requests. So
the effect of this patch is that requests which fit into 32kB will fall
back to vmalloc easier now.
Link: http://lkml.kernel.org/r/20170306103327.2766-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alloc_ila_locks seemed to c&p from alloc_bucket_locks allocation pattern
which is quite unusual. The default allocation size is 320 *
sizeof(spinlock_t) which is sub page unless lockdep is enabled when the
performance benefit is really questionable and not worth the subtle code
IMHO. Also note that the context when we call ila_init_net (modprobe or
a task creating a net namespace) has to be properly configured.
Let's just simplify the code and use kvmalloc helper which is a
transparent way to use kmalloc with vmalloc fallback.
Link: http://lkml.kernel.org/r/20170306103032.2540-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For each netns (except init_net), we initialize its null entry
in 3 places:
1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
loopback registers
Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f5
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.
Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* don't try to authenticate during reconfiguration, which causes
drivers to get confused
* fix a kernel-doc warning for a recently merged change
* fix MU-MIMO group configuration (relevant only for monitor mode)
* more rate flags fix: remove stray RX_ENC_FLAG_40MHZ
* fix IBSS probe response allocation size
-----BEGIN PGP SIGNATURE-----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=FcxE
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple more fixes:
* don't try to authenticate during reconfiguration, which causes
drivers to get confused
* fix a kernel-doc warning for a recently merged change
* fix MU-MIMO group configuration (relevant only for monitor mode)
* more rate flags fix: remove stray RX_ENC_FLAG_40MHZ
* fix IBSS probe response allocation size
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlan devices, like all other software devices, enable
NETIF_F_HW_CSUM feature. However, unlike all the othe other
software devices, vlans will switch to using IP|IPV6_CSUM
features, if the underlying devices uses them. In these situations,
checksum offload features on the vlan device can't be controlled
via ethtool.
This patch makes vlans keep HW_CSUM feature if the underlying
device supports checksum offloading. This makes vlan devices
behave like other software devices, and restores control to the
user.
A side-effect is that some offload settings (typically UFO)
may be enabled on the vlan device while being disabled on the HW.
However, the GSO code will correctly process the packets. This
actually results in slightly better raw throughput.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Congestion control modules that want full control over congestion
control behavior do not want the cwnd modifications controlled by
the sysctl_tcp_slow_start_after_idle code path.
So skip those code paths for CC modules that use the cong_control()
API.
As an example, those cwnd effects are not desired for the BBR congestion
control algorithm.
Fixes: c0402760f5 ("tcp: new CC hook to set sending rate with rate_sample in any CA state")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 dst could use fi->fib_metrics to store metrics but fib_info
itself is refcnt'ed, so without taking a refcnt fi and
fi->fib_metrics could be freed while dst metrics still points to
it. This triggers use-after-free as reported by Andrey twice.
This patch reverts commit 2860583fe8 ("ipv4: Kill rt->fi") to
restore this reference counting. It is a quick fix for -net and
-stable, for -net-next, as Eric suggested, we can consider doing
reference counting for metrics itself instead of relying on fib_info.
IPv6 is very different, it copies or steals the metrics from mx6_config
in fib6_commit_metrics() so probably doesn't need a refcnt.
Decnet has already done the refcnt'ing, see dn_fib_semantic_match().
Fixes: 2860583fe8 ("ipv4: Kill rt->fi")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do not check if packet from real server is for NAT
connection before performing SNAT. This causes problems
for setups that use DR/TUN and allow local clients to
access the real server directly, for example:
- local client in director creates IPVS-DR/TUN connection
CIP->VIP and the request packets are routed to RIP.
Talks are finished but IPVS connection is not expired yet.
- second local client creates non-IPVS connection CIP->RIP
with same reply tuple RIP->CIP and when replies are received
on LOCAL_IN we wrongly assign them for the first client
connection because RIP->CIP matches the reply direction.
As result, IPVS SNATs replies for non-IPVS connections.
The problem is more visible to local UDP clients but in rare
cases it can happen also for TCP or remote clients when the
real server sends the reply traffic via the director.
So, better to be more precise for the reply traffic.
As replies are not expected for DR/TUN connections, better
to not touch them.
Reported-by: Nick Moriarty <nick.moriarty@york.ac.uk>
Tested-by: Nick Moriarty <nick.moriarty@york.ac.uk>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
When VHT IBSS support was added, the size of the extra elements
wasn't considered in ieee80211_ibss_build_presp(), which makes
it possible that it would overrun the allocated buffer. Fix it
by allocating the necessary space.
Fixes: abcff6ef01 ("mac80211: add VHT support for IBSS")
Reported-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since groups 0 and 63 are invalid, we should check for those bits.
Note that the 802.11 spec specifies the *bit* order, but the CPU
doesn't care about bit order since it can't address bits, so it's
always treating BIT(0) as the lowest bit within a byte.
Reported-by: Jan Fuchs <jan.fuchs@lancom.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If ieee80211_hw_restart() is called during authentication, the
authentication process will continue, causing the driver to be called
in a wrong state. This ultimately causes an oops in the iwlwifi
driver (at least).
This fixes bugzilla 195299 partly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Upon NETDEV_DOWN event, all xfrm_state objects which are bound to
the device are flushed.
The condition for this is wrong, though, testing dev->hw_features
instead of dev->features. If a device has non-user-modifiable
NETIF_F_HW_ESP, then its xfrm_state objects are not flushed,
causing a crash later on after the device is deleted.
Check dev->features instead of dev->hw_features.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The sadb_x_sec_len is stored in the unit 'byte divided by eight'.
So we have to multiply this value by eight before we can do
size checks. Otherwise we may get a slab-out-of-bounds when
we memcpy the user sec_ctx.
Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull namespace updates from Eric Biederman:
"This is a set of small fixes that were mostly stumbled over during
more significant development. This proc fix and the fix to
posix-timers are the most significant of the lot.
There is a lot of good development going on but unfortunately it
didn't quite make the merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Fix unbalanced hard link numbers
signal: Make kill_proc_info static
rlimit: Properly call security_task_setrlimit
signal: Remove unused definition of sig_user_definied
ia64: Remove unused IA64_TASK_SIGHAND_OFFSET and IA64_SIGHAND_SIGLOCK_OFFSET
ipc: Remove unused declaration of recompute_msgmni
posix-timers: Correct sanity check in posix_cpu_nsleep
sysctl: Remove dead register_sysctl_root
Whole point of randomization was to hide server uptime, but an attacker
can simply start a syn flood and TCP generates 'old style' timestamps,
directly revealing server jiffies value.
Also, TSval sent by the server to a particular remote address vary
depending on syncookies being sent or not, potentially triggering PAWS
drops for innocent clients.
Lets implement proper randomization, including for SYNcookies.
Also we do not need to export sysctl_tcp_timestamps, since it is not
used from a module.
In v2, I added Florian feedback and contribution, adding tsoff to
tcp_get_cookie_sock().
v3 removed one unused variable in tcp_v4_connect() as Florian spotted.
Fixes: 95a22caee3 ("tcp: randomize tcp timestamp offsets for each connection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Tested-by: Florian Westphal <fw@strlen.de>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The attribute sizes for IFLA_BRPORT_MCAST_FLOOD and
IFLA_BRPORT_BCAST_FLOOD weren't accounted for in br_port_info_size()
when they were added. Do so now and also add the corresponding policy
entries:
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Mike Manning <mmanning@brocade.com>
Fixes: b6cb5ac833 ("net: bridge: add per-port multicast flood flag")
Fixes: 99f906e9ad ("bridge: add per-port broadcast flood flag")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) The wireless rate info fix from Johannes Berg.
2) When a RAW socket is in hdrincl mode, we need to make sure that the
user provided at least a minimally sized ipv4/ipv6 header. Fix from
Alexander Potapenko.
3) We must emit IFLA_PHYS_PORT_NAME netlink attributes using
nla_put_string() so that it is NULL terminated.
4) Fix a bug in TCP fastopen handling, wherein child sockets
erroneously inherit the fastopen_req from the parent, and later can
end up derefencing freed memory or doing a double free. From Eric
Dumazet.
5) Don't clear out netdev stats at close time in tg3 driver, from
YueHaibing.
6) Fix refcount leak in xt_CT, from Gao Feng.
7) In nft_set_bitmap() don't leak dummy elements, from Liping Zhang.
8) Fix deadlock due to taking the expectation lock twice, also from
Liping Zhang.
9) Make xt_socket work again with ipv6, from Peter Tirsek.
10) Don't allow IPV6 to be used with IPVS if ipv6.disable=1, from Paolo
Abeni.
11) Make the BPF loader more flexible wrt. changes to the bpf MAP entry
layout. From Jesper Dangaard Brouer.
12) Fix ethtool reported device name in aquantia driver, from Pavel
Belous.
13) Fix build failures due to the compile time size test not working in
netfilter conntrack. From Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cfg80211: make RATE_INFO_BW_20 the default
ipv6: initialize route null entry in addrconf_init()
qede: Fix possible misconfiguration of advertised autoneg value.
qed: Fix overriding of supported autoneg value.
qed*: Fix possible overflow for status block id field.
rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string
netvsc: make sure napi enabled before vmbus_open
aquantia: Fix driver name reported by ethtool
ipv4, ipv6: ensure raw socket message is big enough to hold an IP header
net/sched: remove redundant null check on head
tcp: do not inherit fastopen_req from parent
forcedeth: remove unnecessary carrier status check
ibmvnic: Move queue restarting in ibmvnic_tx_complete
ibmvnic: Record SKB RX queue during poll
ibmvnic: Continue skb processing after skb completion error
ibmvnic: Check for driver reset first in ibmvnic_xmit
ibmvnic: Wait for any pending scrqs entries at driver close
ibmvnic: Clean up tx pools when closing
ibmvnic: Whitespace correction in release_rx_pools
ibmvnic: Delete napi's when releasing driver resources
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJZChTBAAoJELDendYovxMvkXEIAJDpK5UKMsL1Ihgc0DL0OujQ
UGxLfWJueSA1X7i8BgL/8vfgKxSEB9SUiM+ooHOKXS6oDhyk2RP4MuCe5+lhUbbv
ZMK5KxHMlVUOD9EjYif8DhhiwRowBbWYEwr8XgY12s0Ya0a9TQLVC+noGsuzqNiH
1UyzeeWlBae4nulUMMim6urPNq5AEPVeQKNX3S8rlnDp74IKVZuoISMM62b2KRSr
+R8FVBshXR/HO53YNY0+AfmmUa8T1+dyjL50Eo/QnsG0i+3igOqNrzSKSc6T+nBt
Zl3KDUE5W3/OlxuR+CIdZZ1KKtjzoAiR3cvVlHs2z7MIio87bJcYJforAqe6Evo=
=k6in
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen fixes and featrues for 4.12. The main changes are:
- enable building the kernel with Xen support but without enabling
paravirtualized mode (Vitaly Kuznetsov)
- add a new 9pfs xen frontend driver (Stefano Stabellini)
- simplify Xen's cpuid handling by making use of cpu capabilities
(Juergen Gross)
- add/modify some headers for new Xen paravirtualized devices
(Oleksandr Andrushchenko)
- EFI reset_system support under Xen (Julien Grall)
- and the usual cleanups and corrections"
* tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits)
xen: Move xen_have_vector_callback definition to enlighten.c
xen: Implement EFI reset_system callback
arm/xen: Consolidate calls to shutdown hypercall in a single helper
xen: Export xen_reboot
xen/x86: Call xen_smp_intr_init_pv() on BSP
xen: Revert commits da72ff5bfc and 72a9b18629
xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams()
xen/scsifront: use offset_in_page() macro
xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND
x86/cpu: remove hypervisor specific set_cpu_features
vmware: set cpu capabilities during platform initialization
x86/xen: use capabilities instead of fake cpuid values for xsave
x86/xen: use capabilities instead of fake cpuid values for x2apic
x86/xen: use capabilities instead of fake cpuid values for mwait
x86/xen: use capabilities instead of fake cpuid values for acpi
x86/xen: use capabilities instead of fake cpuid values for acc
x86/xen: use capabilities instead of fake cpuid values for mtrr
x86/xen: use capabilities instead of fake cpuid values for aperf
...
Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.
This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.
loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.
Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.
I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
head is previously null checked and so the 2nd null check on head
is redundant and therefore can be removed.
Detected by CoverityScan, CID#1399505 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we no longer release the lock before potentially raising BLACKLISTED
in rbd_reregister_watch(), the "either locked or blacklisted" assert in
rbd_queue_workfn() needs to go: we can be both locked and blacklisted
at that point now.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Cephfs can get cap update requests that contain a new epoch barrier in
them. When that happens we want to pause all OSD traffic until the right
map epoch arrives.
Add an epoch_barrier field to ceph_osd_client that is protected by the
osdc->lock rwsem. When the barrier is set, and the current OSD map
epoch is below that, pause the request target when submitting the
request or when revisiting it. Add a way for upper layers (cephfs)
to update the epoch_barrier as well.
If we get a new map, compare the new epoch against the barrier before
kicking requests and request another map if the map epoch is still lower
than the one we want.
If we get a map with a full pool, or at quota condition, then set the
barrier to the current epoch value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When a Ceph volume hits capacity, a flag is set in the OSD map to
indicate that, and a new map is sprayed around the cluster. With cephfs
we want it to shut down any abortable requests that are in progress with
an -ENOSPC error as they'd just hang otherwise.
Add a new ceph_osdc_abort_on_full helper function to handle this. It
will first check whether there is an out-of-space condition in the
cluster and then walk the tree and abort any request that has
r_abort_on_full set with a -ENOSPC error. Call this new function
directly whenever we get a new OSD map.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Usually, when the osd map is flagged as full or the pool is at quota,
write requests just hang. This is not what we want for cephfs, where
it would be better to simply report -ENOSPC back to userland instead
of stalling.
If the caller knows that it will want an immediate error return instead
of blocking on a full or at-quota error condition then allow it to set a
flag to request that behavior.
Set that flag in ceph_osdc_new_request (since ceph.ko is the only caller),
and on any other write request from ceph.ko.
A later patch will deal with requests that were submitted before the new
map showing the full condition came in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Nothing uses this anymore with the removal of the ack vs. commit code.
Remove the field and just encode zeroes into place in the request
encoding.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a readonly, exported to sysfs module parameter so that userspace
can generate meaningful error messages. It's a bit funky, but there is
no other libceph-specific place.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
No reason to hide CephFS-specific features in the rbd case. Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.
Since xfrm_dst->origin isn't used anywhere following commit
ca116922af ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used
either, so get rid of that too.
Fixes: 9d6ec93801 ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Locally generated TCP packets are usually cloned, so we
do skb_cow_data() on this packets. After that we need to
reload the pointer to the esp header. On udpencap this
header has an offset to skb_transport_header, so take this
offset into account.
Fixes: 67d349ed60 ("net/esp4: Fix invalid esph pointer crash")
Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Reported-by: Don Bowman <db@donbowman.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches
-----BEGIN PGP SIGNATURE-----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=pgEL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"More exchaustive description of primary updates in this release:
- Lots of driver fixes and misc fixes across the board.
- I had to base on a net-next tree because the IPoIB Accelorator
patches needed it.
Unfortunately, it was known to Mellanox that there would need to be
an IPoIB accelorator patch to the net tree (which left some
functions turned off by an #ifdef construct to avoid warnings about
defined but unused functions), then one to the RDMA tree, then a
fixup that went back and re-enabled the functions in the net tree
and enabled their use in the rdma tree
Also, a sparse fix was sent to the net tree after I did my pull,
and the fixup patch conflicts quite directly with that sparse fix,
so I'm going to submit the fixup patch towards the end of the merge
window by itself and based upon your master branch at the time.
- Two separate rounds of hfi1 fixes, one that got dropped from last
release because it came in just a day or two before the end of the
merge window and then the one from this release cycle.
Of note is that I now have a third series that just landed from
Intel yesterday. It is not included in this pull request, but I may
submit it by the end of the week. I'll talk to Intel about
improving the timing of thier submissions for my workflow.
- Changes to our idr usage in the RDMA subsystem that will tie into
our cgroup management and also into the upcoming changes for the
RDMA kernel<->userspace API.
- Addition of support for a netdev to be tied to an RDMA device at
the core level
- Addition of the VNIC driver from Intel.
While IPoIB provides IP over InfiniBand (and *only* IP, no lower
layer protocol headers are allowed or supported), the VNIC driver
presents a virtual Ethernet device with support for things like
varying Ethertypes, VLANs, priorities and other features of
Ethernet.
The virtual devices are centrally managed by the OPA fabric
manager, making this (for the time being) a strictly OPA specific
feature.
- Improvements to the On-Demand Paging support in the RDMA subsystem.
- Addition of three significant OPA changes.
While we added OPA support some time ago (via the hfi1 driver), the
RDMA subsystem has so far glossed over the areas where OPA and
InfiniBand differ.
With this release we are starting to add support for the OPA
extensions into the RDMA core in the following area: Extended port
information for OPA is now supported, extended Address Handle
attributes for OPA are now supported, and extended SA Queries to
get OPA specific subnet information is now supported.
Concise summary from the tag:
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (191 commits)
infiniband: avoid dereferencing uninitialized dst on error path
IB/SA: Add OPA addr header
IB/mlx5: Add port_xmit_wait to counter registers read
IB/ocrdma: fix out of bounds access to local buffer
IB/mlx4: Fix incorrect order of formal and actual parameters
IB/mlx4: Change flush logic so it adheres to the variable name
mlx5: Fix mlx5_ib_map_mr_sg mr length
IB/rxe: Don't clamp residual length to mtu
IB/SA: Add support to query OPA path records
IB/SA: Add OPA path record type
IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields
IB/SA: Introduce path record specific types
IB/SA: Rename ib_sa_path_rec to sa_path_rec
IB/CM: Add braces when using sizeof
IB/core: Define 'opa' rdma_ah_attr type
IB/core: Define 'ib' and 'roce' rdma_ah_attr types
IB/core: Use rdma_ah_attr accessor functions
IB/core: Add accessor functions for rdma_ah_attr fields
IB/PVRDMA: Rename ib_ah_attr related functions
IB/mthca: Rename to_ib_ah_attr to to_rdma_ah_attr
...
Pull audit updates from Paul Moore:
"Fourteen audit patches for v4.12 that span the full range of fixes,
new features, and internal cleanups.
We have a patches to move to 64-bit timestamps, convert refcounts from
atomic_t to refcount_t, track PIDs using the pid struct instead of
pid_t, convert our own private audit buffer cache to a standard
kmem_cache, log kernel module names when they are unloaded, and
normalize the NETFILTER_PKT to make the userspace folks happier.
From a fixes perspective, the most important is likely the auditd
connection tracking RCU fix; it was a rather brain dead bug that I'll
take the blame for, but thankfully it didn't seem to affect many
people (only one report).
I think the patch subject lines and commit descriptions do a pretty
good job of explaining the details and why the changes are important
so I'll point you there instead of duplicating it here; as usual, if
you have any questions you know where to find us.
We also manage to take out more code than we put in this time, that
always makes me happy :)"
* 'stable-4.12' of git://git.infradead.org/users/pcmoore/audit:
audit: fix the RCU locking for the auditd_connection structure
audit: use kmem_cache to manage the audit_buffer cache
audit: Use timespec64 to represent audit timestamps
audit: store the auditd PID as a pid struct instead of pid_t
audit: kernel generated netlink traffic should have a portid of 0
audit: combine audit_receive() and audit_receive_skb()
audit: convert audit_watch.count from atomic_t to refcount_t
audit: convert audit_tree.count from atomic_t to refcount_t
audit: normalize NETFILTER_PKT
netfilter: use consistent ipv4 network offset in xt_AUDIT
audit: log module name on delete_module
audit: remove unnecessary semicolon in audit_watch_handle_event()
audit: remove unnecessary semicolon in audit_mark_handle_event()
audit: remove unnecessary semicolon in audit_field_valid()
Pablo Neira Ayuso says:
====================
Netfilter/IPVS/OVS fixes for net
The following patchset contains a rather large batch of Netfilter, IPVS
and OVS fixes for your net tree. This includes fixes for ctnetlink, the
userspace conntrack helper infrastructure, conntrack OVS support,
ebtables DNAT target, several leaks in error path among other. More
specifically, they are:
1) Fix reference count leak in the CT target error path, from Gao Feng.
2) Remove conntrack entry clashing with a matching expectation, patch
from Jarno Rajahalme.
3) Fix bogus EEXIST when registering two different userspace helpers,
from Liping Zhang.
4) Don't leak dummy elements in the new bitmap set type in nf_tables,
from Liping Zhang.
5) Get rid of module autoload from conntrack update path in ctnetlink,
we don't need autoload at this late stage and it is happening with
rcu read lock held which is not good. From Liping Zhang.
6) Fix deadlock due to double-acquire of the expect_lock from conntrack
update path, this fixes a bug that was introduced when the central
spinlock got removed. Again from Liping Zhang.
7) Safe ct->status update from ctnetlink path, from Liping. The expect_lock
protection that was selected when the central spinlock was removed was
not really protecting anything at all.
8) Protect sequence adjustment under ct->lock.
9) Missing socket match with IPv6, from Peter Tirsek.
10) Adjust skb->pkt_type of DNAT'ed frames from ebtables, from
Linus Luessing.
11) Don't give up on evaluating the expression on new entries added via
dynset expression in nf_tables, from Liping Zhang.
12) Use skb_checksum() when mangling icmpv6 in IPv6 NAT as this deals
with non-linear skbuffs.
13) Don't allow IPv6 service in IPVS if no IPv6 support is available,
from Paolo Abeni.
14) Missing mutex release in error path of xt_find_table_lock(), from
Dan Carpenter.
15) Update maintainers files, Netfilter section. Add Florian to the
file, refer to nftables.org and change project status from Supported
to Maintained.
16) Bail out on mismatching extensions in element updates in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If gcc (e.g. 4.1.2) decides not to inline total_extension_size(), the
build will fail with:
net/built-in.o: In function `nf_conntrack_init_start':
(.text+0x9baf6): undefined reference to `__compiletime_assert_1893'
or
ERROR: "__compiletime_assert_1893" [net/netfilter/nf_conntrack.ko] undefined!
Fix this by forcing inlining of total_extension_size().
Fixes: b3a5db109e ("netfilter: conntrack: use u8 for extension sizes again")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey reported a warning triggered by the rcu code:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289
debug_print_object+0x175/0x210
ODEBUG: activate active (active state 1) object type: rcu_head hint:
(null)
Modules linked in:
CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x192/0x22d lib/dump_stack.c:52
__warn+0x19f/0x1e0 kernel/panic.c:549
warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564
debug_print_object+0x175/0x210 lib/debugobjects.c:286
debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442
debug_rcu_head_queue kernel/rcu/rcu.h:75
__call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229
call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288
rt6_rcu_free net/ipv6/ip6_fib.c:158
rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188
fib6_del_route net/ipv6/ip6_fib.c:1461
fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500
__ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174
ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187
__ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520
addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672
...
Andrey's reproducer program runs in a very tight loop, calling
'unshare -n' and then spawning 2 sets of 14 threads running random ioctl
calls. The relevant networking sequence:
1. New network namespace created via unshare -n
- ip6tnl0 device is created in down state
2. address added to ip6tnl0
- equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1
- DAD is started on the address and when it completes the host
route is inserted into the FIB
3. ip6tnl0 is brought up
- the new fixup_permanent_addr function restarts DAD on the address
4. exit namespace
- teardown / cleanup sequence starts
- once in a blue moon, lo teardown appears to happen BEFORE teardown
of ip6tunl0
+ down on 'lo' removes the host route from the FIB since the dst->dev
for the route is loobback
+ host route added to rcu callback list
* rcu callback has not run yet, so rt is NOT on the gc list so it has
NOT been marked obsolete
5. in parallel to 4. worker_thread runs addrconf_dad_completed
- DAD on the address on ip6tnl0 completes
- calls ipv6_ifa_notify which inserts the host route
All of that happens very quickly. The result is that a host route that
has been deleted from the IPv6 FIB and added to the RCU list is re-inserted
into the FIB.
The exit namespace eventually gets to cleaning up ip6tnl0 which removes the
host route from the FIB again, calls the rcu function for cleanup -- and
triggers the double rcu trace.
The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably,
DAD should not be started in step 2. The interface is in the down state,
so it can not really send out requests for the address which makes starting
DAD pointless.
Since the second DAD was introduced by a recent change, seems appropriate
to use it for the Fixes tag and have the fixup function only start DAD for
addresses in the PREDAD state which occurs in addrconf_ifdown if the
address is retained.
Big thanks to Andrey for isolating a reliable reproducer for this problem.
Fixes: f1705ec197 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If no NLM_F_EXCL is set and the element already exists in the set, make
sure that both elements have the same extensions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
We are going to add more parameters to find_vqs, let's wrap the call so
we don't need to tweak all drivers every time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We try to make this function more readable by improving variable names
and comments, using more stack variables, and doing some smaller changes
to the logics. We also rename the function to make it consistent with
naming conventions used elsewhere in the code.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try to make this function more readable by improving variable names
and comments, plus some minor changes to the logics.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should call ipxitf_put() if the copy_to_user() fails.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jump is now the only one using value action opcode. This is going to
change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP.
This also fixes the TC_ACT_JUMP check, which is incorrectly done as a
bit check, not a value check.
Fixes: e0ee84ded7 ("net sched actions: Complete the JUMPX opcode")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be careful when comparing tcp_time_stamp to some u32 quantity,
otherwise result can be surprising.
Fixes: 7c106d7e78 ("[TCP]: TCP Low Priority congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull splice updates from Al Viro:
"These actually missed the last cycle; the branch itself is from last
December"
* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make nr_pages calculation in default_file_splice_read() a bit less ugly
splice/tee/vmsplice: validate flags
splice_pipe_desc: kill ->flags
remove spd_release_page()
Pull iov_iter updates from Al Viro:
"Cleanups that sat in -next + -stable fodder that has just missed 4.11.
There's more iov_iter work in my local tree, but I'd prefer to push
the stuff that had been in -next first"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: don't revert iov buffer if csum error
generic_file_read_iter(): make use of iov_iter_revert()
generic_file_direct_write(): make use of iov_iter_revert()
orangefs: use iov_iter_revert()
sctp: switch to copy_from_iter_full()
net/9p: switch to copy_from_iter_full()
switch memcpy_from_msg() to copy_from_iter_full()
rds: make use of iov_iter_revert()
Make sure we apply NET_IP_ALIGN when reserving headroom for SKB
and XDP test runs, just like a real driver would.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Instead, pass the kattr in which has a kernel side copy of this
data structure from userspace already.
Fix based upon a suggestion from Alexei Starovoitov.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Eliminate flipping in and out of message fields, dropping fields in the
process.
Sample raw message format IPv4 UDP:
type=NETFILTER_PKT msg=audit(1487874761.386:228): mark=0xae8a2732 saddr=127.0.0.1 daddr=127.0.0.1 proto=17^]
Sample raw message format IPv6 ICMP6:
type=NETFILTER_PKT msg=audit(1487874761.381:227): mark=0x223894b7 saddr=::1 daddr=::1 proto=58^]
Issue: https://github.com/linux-audit/audit-kernel/issues/11
Test case: https://github.com/linux-audit/audit-testsuite/issues/43
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Even though the skb->data pointer has been moved from the link layer
header to the network layer header, use the same method to calculate the
offset in ipv4 and ipv6 routines.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: munged subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix kdoc parameter spelling from extact to extack.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All Xen frontends need to select this symbol to avoid a link error:
net/built-in.o: In function `p9_trans_xen_init':
:(.text+0x149e9c): undefined reference to `__xenbus_register_frontend'
Fixes: d4b40a02f837 ("xen/9pfs: build 9pfs Xen transport driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
In order to use "len" to check for xenbus_read errors properly, we need
to initialize len to 0 before passing it to xenbus_read.
CC: dan.carpenter@oracle.com
CC: jgross@suse.com
CC: boris.ostrovsky@oracle.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
This patch adds a Kconfig option and Makefile support for building the
9pfs Xen driver.
CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>