epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in the versal EDAC driver
-----BEGIN PGP SIGNATURE-----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=0/mm
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
- Fix incorrect delay handling in the plpks (keystore) code.
- Fix a panic when an LPAR boots with a frozen PE.
Thanks to: Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, Nayna Jain.
-----BEGIN PGP SIGNATURE-----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=nXL6
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
- Remove the broken vsyscall emulation code from
the page fault code.
- Fix kexec crash triggered by certain SEV RMP
table layouts.
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmY3TNURHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gocA//TLVBMhvtanCiPOkN5UnfnFyKnkKOIb6w
nEe7UhtD/0ASXlCRYr6KtubQjBVXVf850paa59gaHPXJ2JxD0iFe1YuiHVSoV6dL
Xp2O0NsL8xunUbW2qXquzoerPsWlCmxJtWofDfZvk3unTPr9bMWObpXo2DBoLK9z
yJRr9y0h0ceNWBdA7vQJVs4kgbhe93SPagvI5KAmtk0aHzb2qW4aVN/zNbhFhxDb
UkL3hoi7TocPdZE2v1vJ+78yh+My309U/yNIZDpQw4MAiBDPAes+PyViTMB78Jl/
aWWdd9of0US4avgVqp6Z9afLbI46v5C4NJhpJFV/2AOzFoilZ3xIMF8V4fklk6sZ
rizv6AR0gIJRzOtVxHayCetI95gLgmu0ctn+xcl0qKIHdxbacBxcPjWFHzfJUjG1
jMESa/bCYSbjsoQCUr84Haymky/sUPRSiI+CQ8vg1ZCDze+gqrsNRndi2TFpeNGY
iAMw3YkW40pNhKOpWgWu1+Tm58c7O0HAk69GRvVJidciNEZ2wbPfsGasC8/eEJrD
8vbGqMnFtbWvlGIZIphaS9FdaFnPOs2ACBiwGZdpvHmhcJHzO7uyRB6NE7inoCem
h/AJyClnjUXr1WgtHPwd8nc8pjNm/pw3x8XZqH82NkQclg4QhQ3qxuTb9YRZKPoF
6itlrfcqgw8=
=o9E8
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
Here are some small char/misc/other driver fixes and new device ids for
6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdD2Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk38wCeJeUXW4/yQ4BTj7cHir0aOowVs+UAnAxCUwzt
NpooaVg3v9tzLtvAOp1O
=YfmA
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
Here are some small USB driver fixes for reported problems for 6.9-rc7.
Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdEhQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZ0wCgpMcwSdBww3xH3JHwYjukeW8EPKYAn3N3CBb+
s/e/cETFHgg8RpWq38Sy
=/6D3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZjb8AwAKCRBAj56VGEWX
nEyMAP99BLxJkuEq6nyiHuAvXUpDAX/unCZmsCyt/p5Q2dEfGgEAoDn1Al+0EIb4
yLqu6IeHPh7YGQ/oS0CFJYrZeURyzwY=
=oso0
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
- probe-events: Fix memory leak in parsing probe argument. There is a
memory leak (forget to free an allocated buffer) in a memory allocation
failure path. Fixes it to jump to the correct error handling code.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmY2NRQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bIacH/RmSQaraWiwQmMaWT8Pp
wotOxtMYnl2uLNeVx3vn55+G1Xr/rJP3E9EBGTa+HMPky3trea07eBM5B3UnwT2y
Y75Nhm6z3SFaLBygdKmQZgyIJF1W9w6J1cfqPwPlfR3h08a/9rNojd/DKBo7fLjk
uwGAUHsB6sNhTvRF64wtr+I7V+8CGwNnApyQvf/mLnHsELerzm86nxDhXcfIvb1P
UbM4nupqrV3QYCLYdXmma34PFFJzS3ioINGn692QtHFOSEdSwJfqsNv6AU/w98zD
8o2rlSadc64Yl74vMLFRtBVS3K49VQXNgUUXjx2Gpj9/v80qn+B41HwaNSl1Lagx
lIY=
=tob5
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero
freed the contents of the eventfs_inode and then used kfree_rcu()
to free the inode itself. But the contents should also be protected
by RCU. Switch to a call_rcu() that calls a function to free all
of the eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented by
eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently
there is no interface for that. Add a "release" callback to
the eventfs_inode entry array that allows for freeing of data
that can be referenced by the eventfs_inode being opened.
Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the
last reference to the eventfs_inode is released and the file
is removed. This prevents races between freeing the descriptor
and the opening of the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect
that could cause security concerns. When the tracefs is remounted
with a given gid or uid, all the files within it should inherit
that gid or uid. But if the admin had changed the permission of
some file within the tracefs file system, it would not get updated
by the remount. This caused the kselftest of file permissions
to fail the second time it is run. The first time, all changes
would look fine, but the second time, because the changes were
"saved", the remount did not reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZjXxzxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqzGAQCX8g7gtngGgwSsWqPW5GmecCifwFja
k7cVEDhMYPnDeAEAkYi2ZBgJRkPsWPfMRClDK/DXP4woOo58asxtIxfTMgg=
=mCkt
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmY1uVELHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYP3ZBAAi+aGmWWnpF6ujgGTjLSABztNWimuyr8GgZwCiRL4
otvp/u6Iq6kHQJvPvDpJVUYV80unqz4NV67JYnsOi1kX2QHVME8ActHrQ/tpbiyz
QrIRQ75iQUH4PVlBubUHHT0/zZoHn5RB1D8rB1vRBIxR+ApN2LIUq74d5W6YMcoE
LcatCYLbomKovRFEornQ7+a9rHkiZvUPwbXqpxPUVAUnpaS2cTy6Tc5EmKOu00yi
iMEvx5Hzmb2we0oHTwTNnrjzpmSTNww8geNOKBYRij+3VWBeb1weapJEl/EJ3hRh
B7xkSNvFPMDMVlTUwO4+Bb6W76xbVXteiFsCatGV+2EUmJUlpw50uEUmA/smACuV
Aw9oz6MZEj0VZjY+2kliYxO5sfgeU2Is/ZS2iTPB2pNcYlHppG4Fn4Bob9E+MJ9p
aR+D4NbcrjM/PS4yIgto9/lyjQKu/Vs2T2c8eblE9Vp+io0/ZLI1dguOspRx2eAd
sWSNZBSTPjrFQJuuszS+skws+s6j9hKCwi6N4Neb39+HNWvjJa0SYvBDFjoXBbd6
kfwMWvMwRNDd0YhGAzfapPguy+FEtAoJ6s7SSSLG1XQ3BfKoC2YTQKjfG9aid+n4
MmoAL+UGnXw31IAsITAQGMFC6h41mhNDlKPXJIm4/n8PEW8P7GIQugHN5SvuNXnN
qk8=
=05zN
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional.
- Restore RPM clks on Qualcomm msm8976 by setting num_clks.
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed.
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens on
some devices.
- Revert back to of_match_device() in the Samsung clkout driver to get
the match data based on the parent device's compatible string.
-----BEGIN PGP SIGNATURE-----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=yAwH
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
This patch fix xfstests generic/070 test with smb2 leases = yes.
cifs.ko doesn't set parent lease key and epoch in create context v2 lease.
ksmbd suppose that parent lease and epoch are vaild if data length is
v2 lease context size and handle directory lease using this values.
ksmbd should hanle it as v1 lease not v2 lease if parent lease key and
epoch are not set in create context v2 lease.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
lease break wait for lease break acknowledgment.
rwsem is more suitable than unlock while traversing the list for parent
lease break in ->m_op_list.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fixes generic/011 when enable smb2 leases.
if ksmbd sends multiple notifications for a file, cifs increments
the reference count of the file but it does not decrement the count by
the failure of queue_work.
So even if the file is closed, cifs does not send a SMB2_CLOSE request.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ΕΛΕΝΗ reported that ksmbd binds to the IPV6 wildcard (::) by default for
ipv4 and ipv6 binding. So IPV4 connections are successful only when
the Linux system parameter bindv6only is set to 0 [default value].
If this parameter is set to 1, then the ipv6 wildcard only represents
any IPV6 address. Samba creates different sockets for ipv4 and ipv6
by default. This patch off sk_ipv6only to support IPV4/IPV6 connections
without creating two sockets.
Cc: stable@vger.kernel.org
Reported-by: ΕΛΕΝΗ ΤΖΑΒΕΛΛΑ <helentzavellas@yahoo.gr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.
Currently the behavior is:
# cd /sys/kernel/tracing
# chgrp 1002 instances
# mkdir instances/foo
# ls -l instances/foo
[..]
-r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 18:55 current_tracer
-rw-r----- 1 root lkp 0 May 1 18:55 error_log
drwxr-xr-x 1 root root 0 May 1 18:55 events
--w------- 1 root lkp 0 May 1 18:55 free_buffer
drwxr-x--- 2 root lkp 0 May 1 18:55 options
drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu
-rw-r----- 1 root lkp 0 May 1 18:55 set_event
All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.
Have the "events" directory make its default value based on its parent's
permissions. That now gives:
# ls -l instances/foo
[..]
-rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb
-r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:16 current_tracer
-rw-r----- 1 root lkp 0 May 1 21:16 error_log
drwxr-xr-x 1 root lkp 0 May 1 21:16 events
--w------- 1 root lkp 0 May 1 21:16 free_buffer
drwxr-x--- 2 root lkp 0 May 1 21:16 options
drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu
-rw-r----- 1 root lkp 0 May 1 21:16 set_event
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.
Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The toplevel events directory is really no different than the events
directory of instances. Having the two be different caused
inconsistencies and made it harder to fix the permissions bugs.
Make all events directories act the same.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.846448710@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.
Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.
But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.
To demonstrate this:
# cd /sys/kernel/tracing/
# mkdir instances/foo
# ls -ld instances/foo
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 18:57 current_tracer
# mount -o remount,gid=1002 .
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 18:57 current_tracer
Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 19:19 current_tracer
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 19:19 instances
# mount -o remount,gid=1002 .
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 19:19 current_tracer
# ls -ld instances
drwxr-x--- 3 root lkp 0 May 1 19:19 instances
# ls -ld instances/foo/
drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/
Where all files were updated by the remount gid update.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The freeing of eventfs_inode via a kfree_rcu() callback. But the content
of the eventfs_inode was being freed after the last kref. This is
dangerous, as changes are being made that can access the content of an
eventfs_inode from an RCU loop.
Instead of using kfree_rcu() use call_rcu() that calls a function to do
all the freeing of the eventfs_inode after a RCU grace period has expired.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.370261163@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 43aa6f97c2 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add missing RCH support for endpoint access_coordinate calculation
-----BEGIN PGP SIGNATURE-----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=CqsW
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.
Fixes: 79aab093a0 ("net: Update API for VF vlan protocol 802.1ad support")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aeD1
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-05-02
1) Fix an error pointer dereference in xfrm_in_fwd_icmp.
From Antony Antony.
2) Preserve vlan tags for ESP transport mode software GRO.
From Paul Davey.
3) Fix a spelling mistake in an uapi xfrm.h comment.
From Anotny Antony.
* tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Correct spelling mistake in xfrm.h comment
xfrm: Preserve vlan tags for transport mode software GRO
xfrm: fix possible derferencing in error path
====================
Link: https://lore.kernel.org/r/20240502084838.2269355-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver uses local_bh_disable()/local_bh_enable() in its
IRQ handler to avoid triggering net_rx_action() softirq on exit from
netif_rx(). The net_rx_action() could trigger this driver .start_xmit
callback, which is protected by the same lock as the IRQ handler, so
calling the .start_xmit from netif_rx() from the IRQ handler critical
section protected by the lock could lead to an attempt to claim the
already claimed lock, and a hang.
The local_bh_disable()/local_bh_enable() approach works only in case
the IRQ handler is protected by a spinlock, but does not work if the
IRQ handler is protected by mutex, i.e. this works for KS8851 with
Parallel bus interface, but not for KS8851 with SPI bus interface.
Remove the BH manipulation and instead of calling netif_rx() inside
the IRQ handler code protected by the lock, queue all the received
SKBs in the IRQ handler into a queue first, and once the IRQ handler
exits the critical section protected by the lock, dequeue all the
queued SKBs and push them all into netif_rx(). At this point, it is
safe to trigger the net_rx_action() softirq, since the netif_rx()
call is outside of the lock that protects the IRQ handler.
Fixes: be0384bf59 ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang")
Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZjTV0gAKCRCAXGG7T9hj
vlCoAP4wxpMiuAi7AR2PGUiSeGjH/RwDBJR8xBXJawwpzou8TwD/eWK0uYGYyfAr
R1P2KQcOynBibNQ8iNvVkYjO270v5QY=
=/4ly
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes when running as Xen PV guests for issues introduced in the
6.9 merge window, both related to apic id handling"
* tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: return a sane initial apic id when running as PV guest
x86/xen/smp_pv: Register the boot CPU APIC properly
- Avoid triggering the softlockup watchdog when accepting large chunks
of memory from the hypervisor
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZjS4yAAKCRAwbglWLn0t
XIOQAPkBZlRdhlbegKjguyvVk9S6EKAgA1j94L/gK8ZL9olbUwD/fEuBIm+U2wtv
Ntulu0l5kiHSJzC8lwsUdtUSd+ovUQg=
=o5dU
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
A recent commit fixed the code that parses the firmware files before
downloading them to the controller but introduced a memory leak in case
the sanity checks ever fail.
Make sure to free the firmware buffer before returning on errors.
Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix potential null-ptr-deref in hci_le_big_sync_established_evt().
Fixes: f777d88278 (Bluetooth: ISO: Notify user space about failed bis connections)
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth is not a random device connected to the MMC/SD controller. It
is function 2 of the SDIO device.
Fix the address of the bluetooth node. Also fix the node name and drop
the label.
Fixes: 055ef10ccd ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware.
Fixes: a7f8dedb4b ("Bluetooth: qca: add support for QCA2066")
Cc: stable@vger.kernel.org # 6.7
Cc: Tim Jiang <quic_tjiang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed.
Fixes: c0187b0bd3 ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The default device address apparently comes from the NVM configuration
file and can differ quite a bit between controllers.
Store the default address when parsing the configuration file and use it
to determine whether the controller has been provisioned with an
address.
This makes sure that devices without a unique address start as
unconfigured unless a valid address has been provided in the devicetree.
Fixes: 32868e126c ("Bluetooth: qca: fix invalid device address check")
Cc: stable@vger.kernel.org # 6.5
Cc: Doug Anderson <dianders@chromium.org>
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The NVM configuration files used by WCN3988 and WCN3990/1/8 have two
sets of configuration tags that are enclosed by a type-length header of
type four which the current parser fails to account for.
Instead the driver happily parses random data as if it were valid tags,
something which can lead to the configuration data being corrupted if it
ever encounters the words 0x0011 or 0x001b.
As is clear from commit b63882549b ("Bluetooth: btqca: Fix the NVM
baudrate tag offcet for wcn3991") the intention has always been to
process the configuration data also for WCN3991 and WCN3998 which
encodes the baud rate at a different offset.
Fix the parser so that it can handle the WCN3xxx configuration files,
which has an enclosing type-length header of type four and two sets of
TLV tags enclosed by a type-length header of type two and three,
respectively.
Note that only the first set, which contains the tags the driver is
currently looking for, will be parsed for now.
With the parser fixed, the software in-band sleep bit will now be set
for WCN3991 and WCN3998 (as it is for later controllers) and the default
baud rate 3200000 may be updated by the driver also for WCN3xxx
controllers.
Notably the deep-sleep feature bit is already set by default in all
configuration files in linux-firmware.
Fixes: 4219d46868 ("Bluetooth: btqca: Add wcn3990 firmware download support.")
Cc: stable@vger.kernel.org # 4.19
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the missing sanity checks when parsing the firmware files before
downloading them to avoid accessing and corrupting memory beyond the
vmalloced buffer.
Fixes: 83e81961ff ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: stable@vger.kernel.org # 4.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tying the msft->data lifetime to hdev by freeing it in
hci_release_dev() to fix the following case:
[use]
msft_do_close()
msft = hdev->msft_data;
if (!msft) ...(1) <- passed.
return;
mutex_lock(&msft->filter_lock); ...(4) <- used after freed.
[free]
msft_unregister()
msft = hdev->msft_data;
hdev->msft_data = NULL; ...(2)
kfree(msft); ...(3) <- msft is freed.
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common
kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30
kernel/locking/mutex.c:752
Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309
Fixes: bf6a4e30ff ("Bluetooth: disable advertisement filters during suspend")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.
Call stack summary:
[use]
l2cap_bredr_sig_cmd
l2cap_connect
┌ mutex_lock(&conn->chan_lock);
│ chan = pchan->ops->new_connection(pchan); <- alloc chan
│ __l2cap_chan_add(conn, chan);
│ l2cap_chan_hold(chan);
│ list_add(&chan->list, &conn->chan_l); ... (1)
└ mutex_unlock(&conn->chan_lock);
chan->conf_state ... (4) <- use after free
[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l: ... (2)
│ l2cap_chan_put(chan);
│ l2cap_chan_destroy
│ kfree(chan) ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311
Fixes: 73ffa904b7 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.
This address is now used to determine if a controller has a valid
address or if one needs to be provided through devicetree or by user
space before the controller can be used.
It turns out that the WCN3991 controllers used in Chromium Trogdor
machines use a different default address, 39:98:00:00:5a:ad, which also
needs to be marked as invalid so that the correct address is fetched
from the devicetree.
Qualcomm has unfortunately not yet provided any answers as to whether
the 39:98 encodes a hardware id and if there are other variants of the
default address that needs to be handled by the driver.
For now, add the Trogdor WCN3991 default address to the device address
check to avoid having these controllers start with the default address
instead of their assigned addresses.
Fixes: 32868e126c ("Bluetooth: qca: fix invalid device address check")
Cc: stable@vger.kernel.org # 6.5
Cc: Doug Anderson <dianders@chromium.org>
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Previously we claimed "pcie_aspm=off" meant that ASPM would be disabled,
which is wrong.
Correct this to say that with "pcie_aspm=off", Linux doesn't touch any ASPM
configuration at all. ASPM may have been enabled by firmware, and that
will be left unchanged. See "aspm_support_enabled".
Link: https://lore.kernel.org/r/20240429191821.691726-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=of/D
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240503' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Nothing major in here - an nvme pull request with mostly auth/tcp
fixes, and a single fix for ublk not setting segment count and size
limits"
* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
ublk: remove segment count and size limits
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition,
recent emu10k1 regression fixes and usual HD-audio quirks are
included.
-----BEGIN PGP SIGNATURE-----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=K8HF
-----END PGP SIGNATURE-----
Merge tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition, recent
emu10k1 regression fixes and usual HD-audio quirks are included"
* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: hda/realtek: Fix build error without CONFIG_PM
ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
ASoC: cs35l56: fix usages of device_get_named_child_node()
ASoC: da7219-aad: fix usage of device_get_named_child_node()
ASoC: meson: cards: select SND_DYNAMIC_MINORS
ASoC: meson: axg-tdm: add continuous clock support
ASoC: meson: axg-tdm-interface: manage formatters in trigger
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-fifo: use threaded irq to check periods
ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
ALSA: emu10k1: fix E-MU dock initialization
ALSA: emu10k1: use mutex for E-MU FPGA access locking
ALSA: emu10k1: move the whole GPIO event handling to the workqueue
ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
ALSA: emu10k1: fix E-MU card dock presence monitoring
ASoC: rt715-sdca: volume step modification
...
