Netfilter hooks are always running under rcu read lock, use
the new iterator macro so sparse won't complain once we add
proper __rcu annotations.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This also replaces spots that used for_primary_ifa().
for_primary_ifa() aborts the loop on the first secondary address seen.
Replace it with either the rcu or rtnl variant of in_dev_for_each_ifa(),
but two places will now also consider secondary addresses too:
inet_addr_onlink() and inet_ifa_byprefix().
I do not understand why they should ignore secondary addresses.
Why would a secondary address not be considered 'on link'?
When matching a prefix, why ignore a matching secondary address?
Other places get converted as well, but gain "->flags & SECONDARY" check.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ifa_list is protected either by rcu or rtnl lock, but the
current iterators do not account for this.
This adds two iterators as replacement, a later patch in
the series will update them with the needed rcu/rtnl_dereference calls.
Its not done in this patch yet to avoid sparse warnings -- the fields
lack the proper __rcu annotation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
I'm told that there's not really any point populating the list.
Current OpenAFS ignores it, as does AuriStor - and IBM AFS 3.6 will
do the right thing.
The list is actually useless as it's the client's view of the world,
not the servers, so if there's any NAT in the way its contents are
invalid. Further, it doesn't support IPv6 addresses.
On that basis, feel free to make it an empty list and remove all the
interface enumeration.
V1 of this patch reworked the function to use a new helper for the
ifa_list iteration to avoid sparse warnings once the proper __rcu
annotations get added in struct in_device later.
But, in light of the above, just remove afs_get_ipv4_interfaces.
Compile tested only.
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable rc is assigned with a value that is never read and
it is re-assigned a new value later on. The assignment is redundant
and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When isdn4linux came up in the context of another patch series, I
remembered that we had discussed removing it a while ago.
It turns out that the suggestion from Karsten Keil wa to remove I4L
in 2018 after the last public ISDN networks are shut down. This has
happened now (with a very small number of exceptions), so I guess it's
time to try again.
We currently have three ISDN stacks in the kernel: the original
isdn4linux (with the hisax driver), the newer CAPI (with four drivers),
and finally the mISDN stack (supporting roughly the same hardware as
hisax).
As far as I can tell, anyone using ISDN with mainline kernel drivers in
the past few years uses mISDN, and this is typically used for voice-only
PBX installations that don't require a public network.
The older stacks support additional features for data networks, but those
typically make no sense any more if there is no network to connect to.
My proposal for this time is to kill off isdn4linux entirely, as it seems
to have been unusable for quite a while. This code has been abandoned
for many years and it does cause problems for treewide maintenance as
it tends to do everything that we try to stop doing.
Birger Harzenetter mentioned that is is still using i4l in order to
make use of the 'divert' feature that is not part of mISDN, but has
otherwise moved on to mISDN for normal operation, like apparently
everyone else.
CAPI in turn is not quite as obsolete, but two of the drivers (avm
and hysdn) don't seem to be used at all, while another one (gigaset)
will stop being maintained as Paul Bolle is no longer able to
test it after the network gets shut down in September.
All three are now moved into drivers/staging to let others speak
up in case there are remaining users.
This leaves Bluetooth CMTP as the only remaining user of CAPI, but
Marcel Holtmann wishes to keep maintaining it.
For the discussion on version 1, see [2]
Unfortunately, Karsten Keil as the maintainer has not participated in
the discussion.
Arnd
[1] https://patchwork.kernel.org/patch/8484861/#17900371
[2] https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=1ISP
-----END PGP SIGNATURE-----
Merge tag 'isdn-removal' of https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Arnd Bergmann says:
====================
isdn: deprecate non-mISDN drivers
When isdn4linux came up in the context of another patch series, I
remembered that we had discussed removing it a while ago.
It turns out that the suggestion from Karsten Keil wa to remove I4L
in 2018 after the last public ISDN networks are shut down. This has
happened now (with a very small number of exceptions), so I guess it's
time to try again.
We currently have three ISDN stacks in the kernel: the original
isdn4linux (with the hisax driver), the newer CAPI (with four drivers),
and finally the mISDN stack (supporting roughly the same hardware as
hisax).
As far as I can tell, anyone using ISDN with mainline kernel drivers in
the past few years uses mISDN, and this is typically used for voice-only
PBX installations that don't require a public network.
The older stacks support additional features for data networks, but those
typically make no sense any more if there is no network to connect to.
My proposal for this time is to kill off isdn4linux entirely, as it seems
to have been unusable for quite a while. This code has been abandoned
for many years and it does cause problems for treewide maintenance as
it tends to do everything that we try to stop doing.
Birger Harzenetter mentioned that is is still using i4l in order to
make use of the 'divert' feature that is not part of mISDN, but has
otherwise moved on to mISDN for normal operation, like apparently
everyone else.
CAPI in turn is not quite as obsolete, but two of the drivers (avm
and hysdn) don't seem to be used at all, while another one (gigaset)
will stop being maintained as Paul Bolle is no longer able to
test it after the network gets shut down in September.
All three are now moved into drivers/staging to let others speak
up in case there are remaining users.
This leaves Bluetooth CMTP as the only remaining user of CAPI, but
Marcel Holtmann wishes to keep maintaining it.
For the discussion on version 1, see [2]
Unfortunately, Karsten Keil as the maintainer has not participated in
the discussion.
Arnd
[1] https://patchwork.kernel.org/patch/8484861/#17900371
[2] https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
Add hw offload of TC flower on MSCC Ocelot
This patch series enables hardware offload for flower filter used in
traffic controller on MSCC Ocelot board.
v2->v3 changes:
- remove the check for shared blocks
v1->v2 changes:
- when declaring variables use reverse christmas tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware offload of port filtering are now supported via tc command using
flower filter. ACL rules are used to enable the hardware offload.
The following keys are supported:
vlan_id
vlan_prio
dst_mac/src_mac for non IP frames
dst_ip/src_ip
dst_port/src_port
The following actions are supported:
trap
drop
These filters are supported only on the ingress schedulare.
Add:
tc qdisc add dev eth3 ingress
tc filter ad dev eth3 parent ffff: ip_proto ip flower \
ip_proto tcp dst_port 80 action drop
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ACL support using the TCAM. Using ACL it is possible to create rules
in hardware to filter/redirect frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset container Netfilter/IPVS update for net-next:
1) Add UDP tunnel support for ICMP errors in IPVS.
Julian Anastasov says:
This patchset is a followup to the commit that adds UDP/GUE tunnel:
"ipvs: allow tunneling with gue encapsulation".
What we do is to put tunnel real servers in hash table (patch 1),
add function to lookup tunnels (patch 2) and use it to strip the
embedded tunnel headers from ICMP errors (patch 3).
2) Extend xt_owner to match for supplementary groups, from
Lukasz Pawelczyk.
3) Remove unused oif field in flow_offload_tuple object, from
Taehee Yoo.
4) Release basechain counters from workqueue to skip synchronize_rcu()
call. From Florian Westphal.
5) Replace skb_make_writable() by skb_ensure_writable(). Patchset
from Florian Westphal.
6) Checksum support for gue encapsulation in IPVS, from Jacky Hu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-05-31
The following pull-request contains BPF updates for your *net-next* tree.
Lots of exciting new features in the first PR of this developement cycle!
The main changes are:
1) misc verifier improvements, from Alexei.
2) bpftool can now convert btf to valid C, from Andrii.
3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
This feature greatly improves BPF speed on 32-bit architectures. From Jiong.
4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
bpf programs got stuck in dying cgroups. From Roman.
5) new bpf_send_signal() helper, from Yonghong.
6) cgroup inet skb programs can signal CN to the stack, from Lawrence.
7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xdping allows us to get latency estimates from XDP. Output looks
like this:
./xdping -I eth4 192.168.55.8
Setting up XDP for eth4, please wait...
XDP setup disrupts network connectivity, hit Ctrl+C to quit
Normal ping RTT data
[Ignore final RTT; it is distorted by XDP using the reply]
PING 192.168.55.8 (192.168.55.8) from 192.168.55.7 eth4: 56(84) bytes of data.
64 bytes from 192.168.55.8: icmp_seq=1 ttl=64 time=0.302 ms
64 bytes from 192.168.55.8: icmp_seq=2 ttl=64 time=0.208 ms
64 bytes from 192.168.55.8: icmp_seq=3 ttl=64 time=0.163 ms
64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.275 ms
4 packets transmitted, 4 received, 0% packet loss, time 3079ms
rtt min/avg/max/mdev = 0.163/0.237/0.302/0.054 ms
XDP RTT data:
64 bytes from 192.168.55.8: icmp_seq=5 ttl=64 time=0.02808 ms
64 bytes from 192.168.55.8: icmp_seq=6 ttl=64 time=0.02804 ms
64 bytes from 192.168.55.8: icmp_seq=7 ttl=64 time=0.02815 ms
64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.02805 ms
The xdping program loads the associated xdping_kern.o BPF program
and attaches it to the specified interface. If run in client
mode (the default), it will add a map entry keyed by the
target IP address; this map will store RTT measurements, current
sequence number etc. Finally in client mode the ping command
is executed, and the xdping BPF program will use the last ICMP
reply, reformulate it as an ICMP request with the next sequence
number and XDP_TX it. After the reply to that request is received
we can measure RTT and repeat until the desired number of
measurements is made. This is why the sequence numbers in the
normal ping are 1, 2, 3 and 8. We XDP_TX a modified version
of ICMP reply 4 and keep doing this until we get the 4 replies
we need; hence the networking stack only sees reply 8, where
we have XDP_PASSed it upstream since we are done.
In server mode (-s), xdping simply takes ICMP requests and replies
to them in XDP rather than passing the request up to the networking
stack. No map entry is required.
xdping can be run in native XDP mode (the default, or specified
via -N) or in skb mode (-S).
A test program test_xdping.sh exercises some of these options.
Note that native XDP does not seem to XDP_TX for veths, hence -N
is not tested. Looking at the code, it looks like XDP_TX is
supported so I'm not sure if that's expected. Running xdping in
native mode for ixgbe as both client and server works fine.
Changes since v4
- close fds on cleanup (Song Liu)
Changes since v3
- fixed seq to be __be16 (Song Liu)
- fixed fd checks in xdping.c (Song Liu)
Changes since v2
- updated commit message to explain why seq number of last
ICMP reply is 8 not 4 (Song Liu)
- updated types of seq number, raddr and eliminated csum variable
in xdpclient/xdpserver functions as it was not needed (Song Liu)
- added XDPING_DEFAULT_COUNT definition and usage specification of
default/max counts (Song Liu)
Changes since v1
- moved from RFC to PATCH
- removed unused variable in ipv4_csum() (Song Liu)
- refactored ICMP checks into icmp_check() function called by client
and server programs and reworked client and server programs due
to lack of shared code (Song Liu)
- added checks to ensure that SKB and native mode are not requested
together (Song Liu)
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-05-31
This series contains updates to the iavf driver.
Nathan Chancellor converts the use of gnu_printf to printf.
Aleksandr modifies the driver to limit the number of RSS queues to the
number of online CPUs in order to avoid creating misconfigured RSS
queues.
Gustavo A. R. Silva converts a couple of instances where sizeof() can be
replaced with struct_size().
Alice makes the remaining changes to the iavf driver to cleanup all the
old "i40evf" references in the driver to iavf, including the file names
that still contained the old driver reference. There was no functional
changes made, just cosmetic to reduce any confusion going forward now
that the iavf driver is the virtual function driver for both i40e and
ice drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There has been quite a few progress around the two steps mentioned in the
answer to the following question:
Q: BPF 32-bit subregister requirements
This patch updates the answer to reflect what has been done.
v2:
- Add missing full stop. (Song Liu)
- Minor tweak on one sentence. (Song Liu)
v1:
- Integrated rephrase from Quentin and Jakub
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Roman Gushchin says:
====================
During my work on memcg-based memory accounting for bpf maps
I've done some cleanups and refactorings of the existing
memlock rlimit-based code. It makes it more robust, unifies
size to pages conversion, size checks and corresponding error
codes. Also it adds coverage for cgroup local storage and
socket local storage maps.
It looks like some preliminary work on the mm side might be
required to start working on the memcg-based accounting,
so I'm sending these patches as a separate patchset.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Most bpf map types doing similar checks and bytes to pages
conversion during memory allocation and charging.
Let's unify these checks by moving them into bpf_map_charge_init().
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to unify the existing memlock charging code with the
memcg-based memory accounting, which will be added later, let's
rework the current scheme.
Currently the following design is used:
1) .alloc() callback optionally checks if the allocation will likely
succeed using bpf_map_precharge_memlock()
2) .alloc() performs actual allocations
3) .alloc() callback calculates map cost and sets map.memory.pages
4) map_create() calls bpf_map_init_memlock() which sets map.memory.user
and performs actual charging; in case of failure the map is
destroyed
<map is in use>
1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which
performs uncharge and releases the user
2) .map_free() callback releases the memory
The scheme can be simplified and made more robust:
1) .alloc() calculates map cost and calls bpf_map_charge_init()
2) bpf_map_charge_init() sets map.memory.user and performs actual
charge
3) .alloc() performs actual allocations
<map is in use>
1) .map_free() callback releases the memory
2) bpf_map_charge_finish() performs uncharge and releases the user
The new scheme also allows to reuse bpf_map_charge_init()/finish()
functions for memcg-based accounting. Because charges are performed
before actual allocations and uncharges after freeing the memory,
no bogus memory pressure can be created.
In cases when the map structure is not available (e.g. it's not
created yet, or is already destroyed), on-stack bpf_map_memory
structure is used. The charge can be transferred with the
bpf_map_charge_move() function.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Group "user" and "pages" fields of bpf_map into the bpf_map_memory
structure. Later it can be extended with "memcg" and other related
information.
The main reason for a such change (beside cosmetics) is to pass
bpf_map_memory structure to charging functions before the actual
allocation of bpf_map.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Socket local storage maps lack the memlock precharge check,
which is performed before the memory allocation for
most other bpf map types.
Let's add it in order to unify all map types.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cgroup local storage maps lack the memlock precharge check,
which is performed before the memory allocation for
most other bpf map types.
Let's add it in order to unify all map types.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lawrence Brakmo says:
====================
This patchset adds support for propagating congestion notifications (cn)
to TCP from cgroup inet skb egress BPF programs.
Current cgroup skb BPF programs cannot trigger TCP congestion window
reductions, even when they drop a packet. This patch-set adds support
for cgroup skb BPF programs to send congestion notifications in the
return value when the packets are TCP packets. Rather than the
current 1 for keeping the packet and 0 for dropping it, they can
now return:
NET_XMIT_SUCCESS (0) - continue with packet output
NET_XMIT_DROP (1) - drop packet and do cn
NET_XMIT_CN (2) - continue with packet output and do cn
-EPERM - drop packet
Finally, HBM programs are modified to collect and return more
statistics.
There has been some discussion regarding the best place to manage
bandwidths. Some believe this should be done in the qdisc where it can
also be managed with a BPF program. We believe there are advantages
for doing it with a BPF program in the cgroup/skb callback. For example,
it reduces overheads in the cases where there is on primary workload and
one or more secondary workloads, where each workload is running on its
own cgroupv2. In this scenario, we only need to throttle the secondary
workloads and there is no overhead for the primary workload since there
will be no BPF program attached to its cgroup.
Regardless, we agree that this mechanism should not penalize those that
are not using it. We tested this by doing 1 byte req/reply RPCs over
loopback. Each test consists of 30 sec of back-to-back 1 byte RPCs.
Each test was repeated 50 times with a 1 minute delay between each set
of 10. We then calculated the average RPCs/sec over the 50 tests. We
compare upstream with upstream + patchset and no BPF program as well
as upstream + patchset and a BPF program that just returns ALLOW_PKT.
Here are the results:
upstream 80937 RPCs/sec
upstream + patches, no BPF program 80894 RPCs/sec
upstream + patches, BPF program 80634 RPCs/sec
These numbers indicate that there is no penalty for these patches
The use of congestion notifications improves the performance of HBM when
using Cubic. Without congestion notifications, Cubic will not decrease its
cwnd and HBM will need to drop a large percentage of the packets.
The following results are obtained for rate limits of 1Gbps,
between two servers using netperf, and only one flow. We also show how
reducing the max delayed ACK timer can improve the performance when
using Cubic.
Command used was:
./do_hbm_test.sh -l -D --stats -N -r=<rate> [--no_cn] [dctcp] \
-s=<server running netserver>
where:
<rate> is 1000
--no_cn specifies no cwr notifications
dctcp uses dctcp
Cubic DCTCP
Lim, DA Mbps cwnd cred drops Mbps cwnd cred drops
-------- ---- ---- ---- ----- ---- ---- ---- -----
1G, 40 35 462 -320 67% 995 1 -212 0.05%
1G, 40,cn 736 9 -78 0.07 995 1 -212 0.05
1G, 5,cn 941 2 -189 0.13 995 1 -212 0.05
Notes:
--no_cn has no effect with DCTCP
Lim = rate limit
DA = maximum delay ack timer
cred = credit in packets
drops = % packets dropped
v1->v2: Insures that only BPF_CGROUP_INET_EGRESS can return values 2 and 3
New egress values apply to all protocols, not just TCP
Cleaned up patch 4, Update BPF_CGROUP_RUN_PROG_INET_EGRESS callers
Removed changes to __tcp_transmit_skb (patch 5), no longer needed
Removed sample use of EDT
v2->v3: Removed the probe timer related changes
v3->v4: Replaced preempt_enable_no_resched() by preempt_enable()
in BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() macro
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds more stats to HBM, including average cwnd and rtt of all TCP
flows, percents of packets that are ecn ce marked and distribution
of return values.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update hbm_out_kern.c to support returning cn notifications.
Also updates relevant files to allow disabling cn notifications.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update BPF_CGROUP_RUN_PROG_INET_EGRESS() callers to support returning
congestion notifications from the BPF programs.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For egress packets, __cgroup_bpf_fun_filter_skb() will now call
BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() instead of PROG_CGROUP_RUN_ARRAY()
in order to propagate congestion notifications (cn) requests to TCP
callers.
For egress packets, this function can return:
NET_XMIT_SUCCESS (0) - continue with packet output
NET_XMIT_DROP (1) - drop packet and notify TCP to call cwr
NET_XMIT_CN (2) - continue with packet output and notify TCP
to call cwr
-EPERM - drop packet
For ingress packets, this function will return -EPERM if any attached
program was found and if it returned != 1 during execution. Otherwise 0
is returned.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allows cgroup inet skb programs to return values in the range [0, 3].
The second bit is used to deterine if congestion occurred and higher
level protocol should decrease rate. E.g. TCP would call tcp_enter_cwr()
The bpf_prog must set expected_attach_type to BPF_CGROUP_INET_EGRESS
at load time if it uses the new return values (i.e. 2 or 3).
The expected_attach_type is currently not enforced for
BPF_PROG_TYPE_CGROUP_SKB. e.g Meaning the current bpf_prog with
expected_attach_type setting to BPF_CGROUP_INET_EGRESS can attach to
BPF_CGROUP_INET_INGRESS. Blindly enforcing expected_attach_type will
break backward compatibility.
This patch adds a enforce_expected_attach_type bit to only
enforce the expected_attach_type when it uses the new
return value.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Create new macro BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() to be used by
__cgroup_bpf_run_filter_skb for EGRESS BPF progs so BPF programs can
request cwr for TCP packets.
Current cgroup skb programs can only return 0 or 1 (0 to drop the
packet. This macro changes the behavior so the low order bit
indicates whether the packet should be dropped (0) or not (1)
and the next bit is used for congestion notification (cn).
Hence, new allowed return values of CGROUP EGRESS BPF programs are:
0: drop packet
1: keep packet
2: drop packet and call cwr
3: keep packet and call cwr
This macro then converts it to one of NET_XMIT values or -EPERM
that has the effect of dropping the packet with no cn.
0: NET_XMIT_SUCCESS skb should be transmitted (no cn)
1: NET_XMIT_DROP skb should be dropped and cwr called
2: NET_XMIT_CN skb should be transmitted and cwr called
3: -EPERM skb should be dropped (no cn)
Note that when more than one BPF program is called, the packet is
dropped if at least one of programs requests it be dropped, and
there is cn if at least one program returns cn.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The variable err is assigned with the value -ENOMEM that is never
read and it is re-assigned a new value later on. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable err is initialized with a value that is never read
and err is reassigned a few statements later. This initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netdev_tx_sent_queue() was introduced by:
commit 3e59020abf ("net: bql: add __netdev_tx_sent_queue()")
BQL counters should be updated without flipping/caring about
BQL status, if the current skb has xmit_more set.
Using __netdev_tx_sent_queue() avoids messing with BQL stop
flag, increases performance on GSO workload by keeping
doorbells to the minimum required and also sparing atomic
operations.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
HW does not support push VLAN action in the RX direction (packets
arriving from the wire). The FW works around this limitation by haripining
the packet. The hairpin workaround applies only when the push VLAN action
is specified in a termination table, assuring that there are no actions
following the haripin.
Instantiate termination table for push VLAN actions. Re-use identical
terminating tables for increased HW cache efficiency.
Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add HW offloading support for flows with Geneve encap/decap.
Notes about decap flows with Geneve TLV Options:
- Support offloading of 32-bit options data only
- At any given time, only one combination of class/type parameters
can be offloaded, but the same class/type combination can have
many different flows offloaded with different 32-bit option data
- Options with value of 0 can't be offloaded
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Rearrange tc tunnel code so that it would be easy to add future tunnels:
- Define tc tunnel object with the fields and callbacks that any
tunnel must implement.
- Define tc UDP tunnel object for UDP tunnels, such as VXLAN
- Move each tunnel code (GRE, VXLAN) to its own separate file
- Rewrite tc tunnel implementation in a general way - using only
the objects and their callbacks.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In mlx5e encap entry structure, IP tunnel info data structure is copied
by value. This approach worked till now, but it breaks when there are
encapsulation options, such as in case of Geneve.
These options are stored in the structure that is allocated adjacent to
the IP tunnel info struct, and not pointed at by any field in that struct.
Therefore, when copying the struct by value, we loose the address of the
original struct and can't get to the encapsulation options.
Fix the problem by storing the pointer to the tunnel info data instead.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use Geneve TLV Options object to manage the flex parser matching
on the 32-bit options data.
When the first flow with a certain class/type values is requested to
be offloaded, create a FW object with FW command (Geneve TLV Options
general object) and start counting the number of flows using this object.
During this time, any request with a different class/type values will
fail to be offloaded.
Once the refcount reaches 0, destroy the TLV options general object,
and can now offload a flow with any class/type parameters.
Geneve TLV Options object is added to core device.
It is currently used to manage Geneve TLV options general
object allocation in FW and its reference counting only.
In the future it will also be used for managing geneve ports
by registering callbacks for ndo_udp_tunnel_add/del.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When filling in flow spec match criteria, to allow previous
modifications of the match criteria, use "|=" rather than "=".
Tunnel options are parsed before the match criteria of the offloaded
flow are being set. If the the flow that we're about to offload has
encapsulation options, the flow group might need to match on additional
criteria.
For Geneve, an additional flow group matching parameter should
be used - misc3. The appropriate bit in the match criteria is set
while parsing the tunnel options, so the criteria value shouldn't
be overwritten.
This is a pre-step for supporting Geneve TLV options offload.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In some case, we don't care the enc_src_ip and enc_dst_ip, and
if we don't match the field enc_src_ip and enc_dst_ip, we can use
fewer flows in hardware when revice the tunnel packets. For example,
the tunnel packets may be sent from different hosts, we must offload
one rule for each host.
$ tc filter add dev vxlan0 protocol ip parent ffff: prio 1 \
flower dst_mac 00:11:22:33:44:00 \
enc_src_ip Host0_IP enc_dst_ip 2.2.2.100 \
enc_dst_port 4789 enc_key_id 100 \
action tunnel_key unset action mirred egress redirect dev eth0_1
$ tc filter add dev vxlan0 protocol ip parent ffff: prio 1 \
flower dst_mac 00:11:22:33:44:00 \
enc_src_ip Host1_IP enc_dst_ip 2.2.2.100 \
enc_dst_port 4789 enc_key_id 100 \
action tunnel_key unset action mirred egress redirect dev eth0_1
If we support flows which only match the enc_key_id and enc_dst_port,
a flow can process the packets sent to VM which (mac 00:11:22:33:44:00).
$ tc filter add dev vxlan0 protocol ip parent ffff: prio 1 \
flower dst_mac 00:11:22:33:44:00 \
enc_dst_port 4789 enc_key_id 100 \
action tunnel_key unset action mirred egress redirect dev eth0_1
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Beside the special vports (PF/uplink/ecpf), the rest of the vports
are similar.
Remove vf_ prefix from function and variable names.
This patch does not change any functionality.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This series provides some low level updates for mlx5 driver needed for
both rdma and netdev trees.
1) Termination flow steering table bits and hardware definitions.
2) Introduce the core dump HW access registers definitions.
3) Refactor and cleans-up VF representors functions handlers.
4) Renames host_params bits to function_changed bits and add the
support for eswitch functions change event in the eswitch general case.
(for both legacy and switchdev modes).
5) Potential error pointer dereference in error handling
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Russell King says:
====================
phylink/sfp updates
This is a series of updates to phylink and sfp:
- Remove an unused net device argument from the phylink MII ioctl
emulation code.
- add support for using interrupts when using a GPIO for link status
tracking, rather than polling it at one second intervals. This
reduces the need to wakeup the CPU every second.
- add support to the MII ioctl API to read and write Clause 45 PHY
registers. I don't know how desirable this is for mainline, but I
have used this facility extensively to investigate the Marvell
88x3310 PHY. A recent illustration of use for this was debugging
the PHY-without-firmware problem recently reported.
- add mandatory attach/detach methods for the upstream side of sfp
bus code, which will allow us to remove the "netdev" structure from
the SFP layers.
- remove the "netdev" structure from the SFP upstream registration
calls, which simplifies PHY to SFP links.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The sfp-bus code now no longer has any use for the network device
structure, so remove its use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add attach and detach methods for SFP buses, which will allow us to get
rid of the netdev storage in sfp-bus.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow userspace to generate Clause 45 MII access cycles via phylib.
This is useful for tools such as mii-diag to be able to inspect Clause
45 PHYs.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for using GPIO interrupts with a fixed-link GPIO rather than
polling the GPIO every second and invoking the phylink resolution. This
avoids unnecessary calls to mac_config().
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev used in the phylink ioctl emulation is never used, so let's
remove it.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently for every representor type and for every single vport,
representer function pointers copy is stored even though they don't
change from one to other vport.
Additionally priv data entry for the rep is not passed during
registration, but its copied. It is used (set and cleared) by the user
of the reps.
As we want to scale vports, to simplify and also to split constants
from data,
1. Rename mlx5_eswitch_rep_if to mlx5_eswitch_rep_ops as to match _ops
prefix with other standard netdev, ibdev ops.
2. Constify the IB and Ethernet rep ops structure.
3. Instead of storing copy of all rep function pointers, store copy
per eswitch rep type.
4. Split data and function pointers to mlx5_eswitch_rep_ops and
mlx5_eswitch_rep_data.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Avoid typecasting from void* to mlx5_ib_dev* or mlx5e_rep_priv*
as it is not needed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Whenever device supports eswitch functions changed event, honor
such device setting. Do not limit it to ECPF.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
To support sriov on a E-Switch manager, num_vfs are queried
to the firmware whenever E-Switch manager is notified by
esw_functions_changed event.
Replace host_params event with esw_functions_changed event that reflects
more appropriate naming.
While at it, also correct num_vfs type from int to u16 as expected by
the function mlx5_esw_query_functions().
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
