In DT systems configurations, of_dma_get_range() returns struct
bus_dma_region DMA regions; they are used to set-up devices
DMA windows with different offset available for translation between DMA
address and CPU address.
In ACPI systems configuration, acpi_dma_get_range() does not return
DMA regions yet and that precludes setting up the dev->dma_range_map
pointer and therefore DMA regions with multiple offsets.
Update acpi_dma_get_range() to return struct bus_dma_region
DMA regions like of_dma_get_range() does.
After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for
ARM64, where the original dma_addr and size are removed as these
arguments are now redundant, and pass 0 and U64_MAX for dma_base
and size of arch_setup_dma_ops; this is a simplification consistent
with what other ACPI architectures also pass to iommu_setup_dma_ops().
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some users interpret _UID only as integer and for them it's easier to
have an integer representation of _UID. Add respective helper for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_set_dmi_backlight_type() is troublesome because it may end
up getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
All callers have been fixed to no longer call it, so remove
acpi_video_set_dmi_backlight_type() now.
This means we now also no longer need acpi_video_unregister_backlight()
for the remove acpi_video backlight after it was wrongly registered hack,
so remove that too.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Apple laptops with an Apple GMUX using this for brightness control,
should take precedence of any other brightness control methods.
Add apple-gmux detection to acpi_video_get_backlight_type() using
the already existing apple_gmux_present() helper function.
This will allow removig the (ab)use of:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
Inside the apple-gmux driver.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.
When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.
Changes in v2:
- Use the new shared nvidia-wmi-ec-backlight.h header for the
WMI firmware API definitions
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Changes in v3:
- Use WMI_BRIGHTNESS_GUID define
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On x86/ACPI boards the acpi_video driver will usually initialize before
the kms driver (except i915). This causes /sys/class/backlight/acpi_video0
to show up and then the kms driver registers its own native backlight
device after which the drivers/acpi/video_detect.c code unregisters
the acpi_video0 device (when acpi_video_get_backlight_type()==native).
This means that userspace briefly sees 2 devices and the disappearing of
acpi_video0 after a brief time confuses the systemd backlight level
save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this make backlight class device registration a separate step
done by a new acpi_video_register_backlight() function. The intend is for
this to be called by the drm/kms driver *after* it is done setting up its
own native backlight device. So that acpi_video_get_backlight_type() knows
if a native backlight will be available or not at acpi_video backlight
registration time, avoiding the add + remove dance.
Note the new acpi_video_register_backlight() function is also called from
a delayed work to ensure that the acpi_video backlight devices does get
registered if necessary even if there is no drm/kms driver or when it is
disabled.
Changes in v2:
- Make register_backlight_delay a module parameter, mainly so that it can
be disabled by Nvidia binary driver users
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Because acpi_dev_parent() is defined as static inline, the extra
header of it in acpi_bus.h is redundant, so drop it.
Fixes: 62fcb99bdf ("ACPI: Drop parent field from struct acpi_device")
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
The parent field in struct acpi_device is, in fact, redundant,
because the dev.parent field in it effectively points to the same
object and it is used by the driver core.
Accordingly, the parent field can be dropped from struct acpi_device
and for this purpose define acpi_dev_parent() to retrieve a parent
struct acpi_device pointer from the dev.parent field in struct
acpi_device. Next, update all of the users of the parent field
in struct acpi_device to use acpi_dev_parent() instead of it and
drop it.
While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used
in one place in a confusing way.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Because acpi_bus_get_acpi_device() is completely analogous to
acpi_fetch_acpi_dev(), rename it to acpi_get_acpi_dev() and
add a kerneldoc comment to it.
Accordingly, rename acpi_bus_put_acpi_device() to acpi_put_acpi_dev()
and update all of the users of these two functions.
While at it, move the acpi_fetch_acpi_dev() header next to the
acpi_get_acpi_dev() header in the header file holding them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
ATM on x86 laptops where we want userspace to use the acpi_video backlight
device we often register both the GPU's native backlight device and
acpi_video's firmware acpi_video# backlight device. This relies on
userspace preferring firmware type backlight devices over native ones, but
registering 2 backlight devices for a single display really is undesirable.
On x86 laptops where the native GPU backlight device should be used,
the registering of other backlight devices is avoided by their drivers
using acpi_video_get_backlight_type() and only registering their backlight
if the return value matches their type.
acpi_video_get_backlight_type() uses
backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
driver is available and will never return native if this returns
false. This means that the GPU's native backlight registering code
cannot just call acpi_video_get_backlight_type() to determine if it
should register its backlight, since acpi_video_get_backlight_type() will
never return native until the native backlight has already registered.
To fix this add a new internal native function parameter to
acpi_video_get_backlight_type(), which when set to true will make
acpi_video_get_backlight_type() behave as if a native backlight has
already been registered.
And add a new acpi_video_backlight_use_native() helper, which sets this
to true, for use in native GPU backlight code.
Changes in v2:
- Replace adding a native parameter to acpi_video_get_backlight_type() with
adding a new acpi_video_backlight_use_native() helper.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.
* acpi-properties:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
Merge ACPI processor driver changes, APEI changes and ACPI EC driver
changes for v5.20-rc1:
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Clean up the ACPI EC driver after previous changes in it (Hans
de Goede).
* acpi-processor:
ACPI: processor: Drop leftover acpi_processor_get_limit_info() declaration
ACPI: processor: Split out thermal initialization from ACPI PSS
ACPI: processor/idle: Annotate more functions to live in cpuidle section
* acpi-apei:
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: APEI: Better fix to avoid spamming the console with old error logs
ACPI: APEI: Fix double word in a comment
* acpi-ec:
ACPI: EC: Drop unused ident initializers from dmi_system_id tables
ACPI: EC: Re-use boot_ec when possible even when EC_FLAGS_TRUST_DSDT_GPE is set
ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk
ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks
Merge ACPI device object management changes for v5.20-rc1.
- Use the facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
* acpi-bus:
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
mfd: core: Use acpi_dev_for_each_child()
ACPI / MMC: PM: Unify fixing up device power
soundwire: Use acpi_dev_for_each_child()
platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child()
ACPI: scan: Walk ACPI device's children using driver core
ACPI: bus: Introduce acpi_dev_for_each_child_reverse()
ACPI: video: Use acpi_dev_for_each_child()
ACPI: bus: Export acpi_dev_for_each_child() to modules
ACPI: property: Use acpi_dev_for_each_child() for child lookup
ACPI: container: Use acpi_dev_for_each_child()
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_dev_has_children()
ACPI: glue: Use acpi_dev_for_each_child()
There is a problem with the current revision checks in
is_cppc_supported() that they essentially prevent the CPPC support
from working if a new _CPC package format revision being a proper
superset of the v3 and only causing _CPC to return a package with more
entries (while retaining the types and meaning of the entries defined by
the v3) is introduced in the future and used by the platform firmware.
In that case, as long as the number of entries in the _CPC return
package is at least CPPC_V3_NUM_ENT, it should be perfectly fine to
use the v3 support code and disregard the additional package entries
added by the new package format revision.
For this reason, drop is_cppc_supported() altogether, put the revision
checks directly into acpi_cppc_processor_probe() so they are easier to
follow and rework them to take the case mentioned above into account.
Fixes: 4773e77cdc ("ACPI / CPPC: Add support for CPPC v3")
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 72f2ecb7ec ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ec ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop the children and node list heads that have no more users
from struct acpi_device and the code manipulating them from
__acpi_device_add() and acpi_device_del().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
struct acpi_device::driver tracks the same information as the driver
member of struct acpi_device::dev.
Fix all users of the former to use the latter and drop the redundant
data from struct acpi_device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 22e7551eb6 ("ACPI / processor: Remove acpi_processor_get_limit_info()"),
left it behind, so drop it.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 239708a3af ("ACPI: Split out ACPI PSS from ACPI Processor
driver"), moves processor thermal registration to acpi_pss_perf_init(),
which doesn't get executed if ACPI_CPU_FREQ_PSS is not enabled.
As ARM64 supports P-states using CPPC, it should be possible to also
support processor passive cooling even if PSS is not enabled. Split
out the processor thermal cooling register from ACPI PSS to support
this, and move it into a separate function in processor_thermal.c.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_device_fix_up_power_extended() for fixing up power of
a device having an ACPI companion in a manner that takes the device's
children into account and make the MMC code use it in two places
instead of walking the list of the device ACPI companion's children
directly.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Make it possible to walk the children of an ACPI device in the revese
order by defining acpi_dev_for_each_child_reverse() in analogy with
acpi_dev_for_each_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Rearrange the ACPI device lookup code used internally by
acpi_find_child_device() so it can avoid extra checks after finding
one object with a matching _ADR and use it for defining
acpi_find_child_by_adr() that will allow the callers to find a given
ACPI device's child matching a given bus address without doing any
other checks in check_one_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
Merge APEI material, changes related to DPTF, ACPI-related x86 cleanup
and documentation improvement for 5.19-rc1:
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero
page (Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
* acpi-apei:
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: APEI: Fix missing ERST record id
* acpi-dptf:
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
* acpi-x86:
x86: ACPI: Make mp_config_acpi_gsi() a void function
* acpi-docs:
ACPI: docs: enumeration: Unify Package () for properties (part 2)
Merge power management, PCI and sysfs-related material and changes
related to handling ACPI tables for 5.19-rc1:
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen).
* acpi-pm:
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: PM: Unify debug messages in acpi_device_set_power()
ACPI: PM: Change pr_fmt() in device_pm.c
ACPI: PM: Convert debug message in acpi_device_get_power()
* acpi-pci:
ACPI: bus: Avoid non-ACPI device objects in walks over children
PCI: ACPI: PM: Power up devices in D3cold before scanning them
ACPI: PM: Introduce acpi_dev_power_up_children_with_adr()
ACPI: bus: Introduce acpi_dev_for_each_child()
* acpi-sysfs:
ACPI: sysfs: Fix BERT error region memory mapping
* acpi-tables:
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
The communication mean of the _CPC desired performance can be
PCC, System Memory, System IO, or Functional Fixed Hardware.
commit b7898fda5b ("cpufreq: Support for fast frequency switching")
fast_switching is 'for switching CPU frequencies from interrupt
context'.
Writes to SystemMemory and SystemIo are fast and suitable this.
This is not the case for PCC and might not be the case for FFH.
Enable fast_switching for the cppc_cpufreq driver in above cases.
Add cppc_allow_fast_switch() to check the desired performance
register address space and set fast_switching accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as
applicable to CXL-enabled platforms. Advertise support for the CXL
features we support - 'CXL 2.0 port/device register access', 'Protocol
Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL
Memory Error Reporting'. The requests are dependent on CONFIG_* based
prerequisites, and prior PCI enabling, similar to how the standard PCI
_OSC bits are determined.
The CXL specification does not define any additional constraints on
the hotplug flow beyond PCIe native hotplug, so a kernel that supports
native PCIe hotplug, supports CXL hotplug. For error handling protocol
and link errors just use PCIe AER. There is nascent support for
amending AER events with CXL specific status [1], but there's
otherwise no additional OS responsibility for CXL errors beyond PCIe
AER. CXL Memory Errors behave the same as typical memory errors so
CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform
firmware.
[1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
OB In preparation for negotiating OS control of CXL _OSC features, do the
minimal enabling to use CXL _OSC to handle the base PCIe feature
negotiation. Recall that CXL _OSC is a super-set of PCIe _OSC and the
CXL 2.0 specification mandates: "If a CXL Host Bridge device exposes CXL
_OSC, CXL aware OSPM shall evaluate CXL _OSC and not evaluate PCIe
_OSC."
Rather than pass a boolean flag alongside @root to all the helper
functions that need to consider PCIe specifics, add is_pcie() and
is_cxl() helper functions to check the flavor of @root. This also
allows for dynamic fallback to PCIe _OSC in cases where an attempt to
use CXL _OXC fails. This can happen on CXL 1.1 platforms that publish
ACPI0016 devices to indicate CXL host bridges, but do not publish the
optional CXL _OSC method. CXL _OSC is mandatory for CXL 2.0 hosts.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220413073618.291335-3-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When walking the children of an ACPI device, take extra care to avoid
using to_acpi_device() on the ones that are not ACPI devices, because
that may lead to out-of-bounds access and memory corruption.
While at it, make the function passed to acpi_dev_for_each_child()
take a struct acpi_device pointer argument (instead of a struct device
one), so it is more straightforward to use.
Fixes: b7dd6298db ("ACPI: PM: Introduce acpi_dev_power_up_children_with_adr()")
Reported-by: kernel test robot <oliver.sang@intel.com>
BugLink: https://lore.kernel.org/lkml/20220420064725.GB16310@xsang-OptiPlex-9020/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Read a record is cleared by others, but the deleted record cache entry is
still created by erst_get_record_id_next. When next enumerate the records,
get the cached deleted record, then erst_read() return -ENOENT and try to
get next record, loop back to first ID will return 0 in function
__erst_record_id_cache_add_one and then set record_id as
APEI_ERST_INVALID_RECORD_ID, finished this time read operation.
It will result in read the records just in the cache hereafter.
This patch cleared the deleted record cache, fix the issue that
"./erst-inject -p" shows record counts not equal to "./erst-inject -n".
A reproducer of the problem(retry many times):
[root@localhost erst-inject]# ./erst-inject -c 0xaaaaa00011
[root@localhost erst-inject]# ./erst-inject -p
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00012
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00013
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00014
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000006
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000007
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000008
[root@localhost erst-inject]# ./erst-inject -p
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00012
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00013
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00014
[root@localhost erst-inject]# ./erst-inject -n
total error record count: 6
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ada5b805eaa7480930082af9bc3d689c6f181329
Version 20220331.
Link: https://github.com/acpica/acpica/commit/ada5b805
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 87a2e39b8abdfedfb86b0a105708e37e895becd9
IORT revision is now updated to E.d (ARM DEN 0049E.d) and
contains a few additions like,
-Added descriptor in the root complex node for specifying
PASID width supported by the root complex.
-Updated RMR node Flags field.
-Introduced memory access attributes in the RMR node.
Please note that IORT Rev E.c is deprecated and not supported.
Link: https://github.com/acpica/acpica/commit/87a2e39b
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4450b89b596a2b54b0cdfe2357b49a63445c2e03
Adds support for the "reserved for OEM use" subtable (types 0x80 to 0xFF).
Link: https://github.com/acpica/acpica/commit/4450b89b
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 002165ecc0a3dc703bb24c789aaa02fdada01675
The specification of this table is described in
"ARM Performance Monitoring Unit Architecture 1.0 Platform Design Document"
ARM DEN0117.
This patch adds the necessary types and support for
compiling/disassembling APMT.
Link: https://github.com/acpica/acpica/commit/002165ec
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0914618b553d6f3366e568409cebf2656891ca69
Automated cleanup; No functional changes.
Link: https://github.com/acpica/acpica/commit/0914618b
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 738d7b0726e6c0458ef93c0a01c0377490888d1e
Affects all source modules and utility signons.
Link: https://github.com/acpica/acpica/commit/738d7b07
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 68c7e542075319d57129467872fcbe98906f2b2c
Those structures aren't used by Linux drivers, and in other NHLT related
tools they are called device_info.
Link: https://github.com/acpica/acpica/commit/68c7e542
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 961221a76814ffa0ecc92219ddf857579b0f7d54
Undocumented bytes at the end of Endpoint Descriptor can be present
independently of Linux-specific structures. Their size can also vary.
Link: https://github.com/acpica/acpica/commit/961221a7
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 23a659e190cf3ed0edd46cddf12bbbcfeaa09396
specific_config has 4 bytes of size and then an amount of bytes specified
by size. All of the terminators that I've seen had a size equal to 4, but
theoretically it can vary.
Link: https://github.com/acpica/acpica/commit/23a659e1
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 19b11f91660b1a38a8e9655b0b1a4ad51ec4db1e
Link: https://github.com/acpica/acpica/commit/19b11f91
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a function powering up all of the children of a given ACPI
device object that are power-manageable and hold valid _ADR ACPI
objects so as to make it possible to prepare the corresponding
"physical" devices for enumeration carried out by a bus type driver,
like PCI.
This function will be used in a subsequent change set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Introduce a wrapper around device_for_each_child() to iterate over
the children of a given ACPI device object.
This function will be used in subsequent change sets.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Replace the last instance of acpi_bus_get_device(), added recently
by commit 87e59b36e5 ("spi: Support selection of the index of the
ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and
finally drop acpi_bus_get_device() that has no more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI
changes for 5.18-rc1:
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
* acpi-soc:
ACPI: LPSS: Provide an SSP type to the driver
ACPI: LPSS: Constify properties member in struct lpss_device_desc
ACPI: platform: Constify properties parameter in acpi_create_platform_device()
* acpi-video:
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
* acpi-apei:
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI/APEI: Limit printable size of BERT table data
ACPI: APEI: fix return value of __setup handlers
ACPI: APEI: rename ghes_init() with an "acpi_" prefix
ACPI: APEI: explicit init of HEST and GHES in apci_init()
Merge ACPICA changes, ACPI OS-layer changes, ACPI bus-type and _OSC
support changes and ACPI tables parsing changes for 5.18-rc1:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
* acpica:
ACPICA: Avoid walking the ACPI Namespace if it is not there
ACPICA: Use uintptr_t and offsetof() in Linux kernel builds
* acpi-osl:
ACPI: OSL: Fix and clean up acpi_os_read/write_port()
* acpi-bus:
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: bus: Introduce acpi_bus_for_each_dev()
* acpi-tables:
ACPI: tables: Add AGDI to the list of known table signatures
ACPI: tables: Add CEDT signature to the list of known tables
ghes_init() sticks out in acpi_init() because it is the only functions
without an "acpi_" prefix.
Rename ghes_init with an "acpi_" prefix, then all looks fine.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
From commit e147133a42 ("ACPI / APEI: Make hest.c manage the estatus
memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage
the estatus memory pool. On the other hand, ghes_init() relies on
sdei_init() to detect the SDEI version and (un)register events. The
dependencies are as follows:
ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init()
ghes_init() => sdei_init()
HEST is not PCI-specific and initcall ordering is implicit and not
well-defined within a level.
Based on above, remove acpi_hest_init() from acpi_pci_root_init() and
convert ghes_init() and sdei_init() from initcalls to explicit calls in the
following order:
acpi_hest_init()
ghes_init()
sdei_init()
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to avoid exposing acpi_bus_type to modules, introduce an
acpi_bus_for_each_dev() helper for iterating over all ACPI device
objects and make typec_link_ports() use it instead of the raw
bus_for_each_dev() along with acpi_bus_type.
Having done that, drop the acpi_bus_type export.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To avoid "performing pointer subtraction with a null pointer has
undefined behavior" compiler warnings, use uintptr_t and offsetof()
that are always available during Linux kernel builds to define
acpi_uintptr_t and the ACPI_TO_INTEGER() and ACPI_OFFSET() macros.
Based on earlier proposal from Arnd Bergmann.
Link: https://lore.kernel.org/linux-acpi/20210927121338.938994-1-arnd@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were
acked by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for
5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd66Tg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynH2wCfetT95966ZMICGDmdwZpEBBYCO1wAn2v9Pwd2
CeXrMLdaOr9WkV2P6mE5
=K4Jh
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmHcgkgSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxs34P/3kFhRk7qrwEekx6F11im6caLKT9+Qap
PuGVqfTbK7TupVQDVGFBEjTjgKY7Ph7Fcr4bqn6wvNOp96cjXyOSk/c1fcpS3Bpr
b1PYsFsb9diNKE462sGGYClyCT3X5qQqtpxzOl3g4I1PWKTC1mKFm4Jm2m6S6cFq
DKhsgYKFzQSZNb1wJM4JjHS9c3BRygqp4nfEAmifu5b9tLZf7stWnFHhbGq63M9m
OwHOrEEnzhf4pOXGZTvIXeczgE6IcuDdlGkIg7XMHnmKSNvj1HqhEgi2lfSRb98z
5eI4S6JymCJGVK+gr8iVCq1iJ+LKqV3YPXRqvI35/+NqIKYxMt2ZivQQf5s3aQLe
26gUulD3O6Pz5tMlwcDElD4/tcClfg35PCD/VzpRR8TAo8vLBb63kZ5v6+HM34ZJ
6QbLTNZJTnGmEqxMccUxP+HhZz8ssqpLAC+R2sE5yXbNpIZq8CbPiGb65RGiX3SG
CmRKqH/xQVNKBYP0ChjmUyhKcBxOnx1Xu8AhsN7gRAy0aht7j7OdjTnJuGiX6gu3
Q5WxvVvkekyfhuFQ5TST9y/fzvMJWzeaA6GhVIr6RoBmshNQGTb0H4HXARxS3Ah5
qjd7ao7BFLa898FCHaHIpmFWp0wF5iljwCJQVP3I2qUpPvDJxEtsxc4CF/AZzyNR
VudoFqLoIV5C
=1egI
-----END PGP SIGNATURE-----
Merge tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most signigicant change here is the addition of a new cpufreq
'P-state' driver for AMD processors as a better replacement for the
venerable acpi-cpufreq driver.
There are also other cpufreq updates (in the core, intel_pstate, ARM
drivers), PM core updates (mostly related to adding new macros for
declaring PM operations which should make the lives of driver
developers somewhat easier), and a bunch of assorted fixes and
cleanups.
Summary:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas
Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector
Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano)"
* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
cpuidle: use default_groups in kobj_type
x86: intel_epb: Allow model specific normal EPB value
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
...
- Update ACPICA code in the kernel to the 20211217 upstream release
including the following changes:
* iASL/Disassembler: Additional support for NHLT table (Bob Moore).
* Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
* Fix a couple of warnings under MSVC (Bob Moore).
* iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
* iASL/NHLT table: "Specific Data" field support (Bob Moore).
* Use original data_table_region pointer for accesses (Jessica
Clarke).
* Use original pointer for virtual origin tables (Jessica Clarke).
* Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
* Avoid subobject buffer overflow when validating RSDP signature
(Jessica Clarke).
* iASL: Add suppport for AGDI table (Ilkka Koskinen).
* Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
A. Shutemov).
* Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
* Utilities: Avoid deleting the same object twice in a row (Rafael
Wysocki).
* Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
(Rafael Wysocki).
* Fix AEST Processor generic resource substructure data field byte
length (Shuuichirou Ishii).
* Fix wrong interpretation of PCC address (Sudeep Holla).
* Add support for PCC Opregion special context data (Sudeep Holla).
- Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
Holla).
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
- Rework flushing of EC work while suspended to idle and clean up
the handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used
when the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
- Add AEST to the list of known ACPI table signatures (Shuuichirou
Ishii).
- Make ACPI NUMA code take hotpluggable memblocks into account when
CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).
- Use default_groups in kobj_type in the ACPI sysfs code (Greg
Kroah-Hartman).
- Rearrange _CPC structure documentation (Andy Shevchenko).
- Drop an always true check from the ACPI thermal driver (Adam
Borowski).
- Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
battery driver (Thomas Weißschuh).
-----BEGIN PGP SIGNATURE-----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=IGwJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are usual ACPICA code updates (although there are more of them
than in the last few releases), a noticeable EC driver update (which
mostly consists of cleanups, though), the device enumeration quirks
handling rework from Hans, some updates eliminating unnecessary CPU
cache flushing in some places (processor idle and system-wide PM code)
and a bunch of assorted cleanups and fixes.
Specifics:
- Update ACPICA code in the kernel to the 20211217 upstream release
including the following changes:
- iASL/Disassembler: Additional support for NHLT table (Bob
Moore).
- Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
- Fix a couple of warnings under MSVC (Bob Moore).
- iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
- iASL/NHLT table: "Specific Data" field support (Bob Moore).
- Use original data_table_region pointer for accesses (Jessica
Clarke).
- Use original pointer for virtual origin tables (Jessica Clarke).
- Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
- Avoid subobject buffer overflow when validating RSDP signature
(Jessica Clarke).
- iASL: Add suppport for AGDI table (Ilkka Koskinen).
- Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
A. Shutemov).
- Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
- Utilities: Avoid deleting the same object twice in a row (Rafael
Wysocki).
- Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
(Rafael Wysocki).
- Fix AEST Processor generic resource substructure data field byte
length (Shuuichirou Ishii).
- Fix wrong interpretation of PCC address (Sudeep Holla).
- Add support for PCC Opregion special context data (Sudeep
Holla).
- Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
Holla).
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system PM
transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang
Li).
- Rework flushing of EC work while suspended to idle and clean up the
handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used when
the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
- Add AEST to the list of known ACPI table signatures (Shuuichirou
Ishii).
- Make ACPI NUMA code take hotpluggable memblocks into account when
CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).
- Use default_groups in kobj_type in the ACPI sysfs code (Greg
Kroah-Hartman).
- Rearrange _CPC structure documentation (Andy Shevchenko).
- Drop an always true check from the ACPI thermal driver (Adam
Borowski).
- Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
battery driver (Thomas Weißschuh)"
* tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
ACPI: processor: thermal: avoid cpufreq_get_policy()
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
ACPI: battery: Add the ThinkPad "Not Charging" quirk
ACPI: sysfs: use default_groups in kobj_type
ACPICA: Update version to 20211217
ACPICA: iASL/NHLT table: "Specific Data" field support
ACPICA: iASL: Add suppport for AGDI table
ACPICA: iASL: Add TDEL table to both compiler/disassembler
ACPICA: Fixed a couple of warnings under MSVC
ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)
ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
ACPICA: Add support for PCC Opregion special context data
ACPICA: Fix wrong interpretation of PCC address
...
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF
driver update for 5.17-rc1:
- Rework the handling of device enumeration quirks in the x86-specific
code and add new quirks for known-broken platforms (Hans de Goede).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
* acpi-x86:
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper
mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices
ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
* acpi-pmic:
ACPI: PMIC: xpower: Fix _TMP ACPI errors
ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function
ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations
* acpi-dptf:
ACPI: DPTF: Update device ID in a comment
Merge ACPI EC driver updates and ACPI processor driver updates for
5.17-rc1:
- Rework flushing of EC work while suspended to idle and clean up
the handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used
when the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
* acpi-ec:
ACPI: EC: Mark the ec_sys write_support param as module_param_hw()
ACPI: EC: Relocate acpi_ec_create_query() and drop acpi_ec_delete_query()
ACPI: EC: Make the event work state machine visible
ACPI: EC: Avoid queuing unnecessary work in acpi_ec_submit_event()
ACPI: EC: Rename three functions
ACPI: EC: Simplify locking in acpi_ec_event_handler()
ACPI: EC: Rearrange the loop in acpi_ec_event_handler()
ACPI: EC: Fold acpi_ec_check_event() into acpi_ec_event_handler()
ACPI: EC: Pass one argument to acpi_ec_query()
ACPI: EC: Call advance_transaction() from acpi_ec_dispatch_gpe()
ACPI: EC: Rework flushing of EC work while suspended to idle
* acpi-processor:
ACPI: processor: thermal: avoid cpufreq_get_policy()
ACPI: processor: idle: Only flush cache on entering C3
ACPI: processor idle: Use swap() instead of open coding it
ACPI: processor: Replace kernel.h with the necessary inclusions
Merge ACPI device enumeration updates, ACPI power management updates
and PCI host bridge ACPI driver updates for 5.17-rc1:
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
* acpi-scan:
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
ACPI: Use acpi_fetch_acpi_dev() instead of acpi_bus_get_device()
ACPI: scan: Introduce acpi_fetch_acpi_dev()
ACPI: scan: Do not add device IDs from _CID if _HID is not valid
* acpi-pm:
ACPI: PM: Remove redundant cache flushing
ACPI: PM: Avoid CPU cache flush when entering S4
* acpi-power:
ACPI: PM: Emit debug messages when enabling/disabling wakeup power
* acpi-pci:
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI
tables. This is often tied to these devices using certain PMICs where the
factory OS image seems to be using native charger and fuel-gauge drivers
instead.
So far both the AC and battery drivers have almost identical checks for
these PMICs including both of them having a DMI based mechanism to force
usage of the ACPI AC and battery drivers on some boards even though one
of these PMICs is present, with the same 2 boards listed in both driver's
DMI tables for this.
The only difference is that the AC driver checks for 2 PMICs and the
battery driver only for one. This has grown this way because the other
(Whiskey Cove) PMIC is only used on a few boards (3 known boards) and
although some of these do have non working ACPI battery devices, their
_STA method always returns 0, but that really should not be relied on.
This patch factors out the shared checks into a new
acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and
battery drivers over to this new helper.
Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration()
and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks
for either of these typically also have broken AC and battery ACPI devices.
The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards
already in this DMI table, to avoid introducing any functional changes
in this refactoring patch.
Besided sharing the code between the AC and battery drivers this
refactoring also moves this quirk handling to under #ifdef CONFIG_X86,
removing this x86 specific code from non x86 ACPI builds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
x86 ACPI boards which ship with only Android as their factory image usually
declare a whole bunch of bogus I2C devs in their ACPI tables and sometimes
there are issues with serdev devices on these boards too, e.g. the resource
points to the wrong serdev_controller.
Instantiating I2C / serdev devs for these bogus devs causes various issues,
e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them.
The Android x86 kernel fork shipped on these devices has some special code
to remove the bogus I2C clients (and serdevs are ignored completely).
Introduce acpi_quirk_skip_i2c_client_enumeration() and
acpi_quirk_skip_serdev_enumeration() helpers. Which can be used by the I2C/
serdev code to skip instantiating any I2C or serdev devs on broken boards.
These 2 helpers are added to drivers/acpi/x86/utils.c so that the DMI table
can be shared between the I2C and serdev code.
Note these boards typically do actually have I2C and serdev devices, just
different ones then the ones described in their DSDT. The devices which
are actually present are manually instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.
The new helpers are only build if CONFIG_X86_ANDROID_TABLETS is enabled,
otherwise they are empty stubs to not unnecessarily grow the kernel size.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new function to enable CPPC feature. This function
will write Continuous Performance Control package
EnableRegister field on the processor.
CPPC EnableRegister register described in section 8.4.7.1 of ACPI 6.4:
This element is optional. If supported, contains a resource descriptor
with a single Register() descriptor that describes a register to which
OSPM writes a One to enable CPPC on this processor. Before this register
is set, the processor will be controlled by legacy mechanisms (ACPI
Pstates, firmware, etc.).
This register will be used for AMD processors to enable AMD P-State
function instead of legacy ACPI P-States.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Storing CRC-32 hash of the Physical Location of Device
object (_PLD) with devices that have it. The hash is stored
to a new struct acpi_device member "pld_crc".
The hash makes it easier to find devices that share a
location, as there is no need to evaluate the entire object
every time. Knowledge about devices that share a location
can be used in device drivers that need to know the
connections to other components inside a system. USB3 ports
will for example always share their location with a USB2
port.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPICA commit 90088defcb99e122edf41038ae5c901206c86dc9
Version 20211217.
Link: https://github.com/acpica/acpica/commit/90088def
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 26f8c721fb01e4a26eec8c85dffcbe950d5e61a9
Add support for optional "Specific Data" field for the optional
Linux-specific structure that appears at the end of an Endpoint
Descriptor.
Link: https://github.com/acpica/acpica/commit/26f8c721
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cf36a6d658ca5aa8c329c2edfc3322c095ffd844
Add support for Arm Generic Diagnostic Dump and Reset Interface, which is
described by "ACPI for Arm Components 1.1 Platform Design Document"
ARM DEN0093.
Add the necessary types in the ACPICA header files and support for
compiling and decompiling the table.
Link: https://github.com/acpica/acpica/commit/cf36a6d6
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 403f9965aba7ff9d2ed5b41bbffdd2a1ed0f596f
Added struct acpi_pcc_info to acpi_src.
Link: https://github.com/acpica/acpica/commit/403f9965
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 55526e8a6133cbf5a9cc0fb75a95dbbac6eb98e6
PCC Opregion added in ACPIC 6.3 requires special context data similar
to GPIO and Generic Serial Bus as it needs to know the internal PCC
buffer and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM.
Lets add support for the special context data needed by PCC Opregion.
Link: https://github.com/acpica/acpica/commit/55526e8a
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 13b9327761955f6e1e5dbf748b3112940c0dc539
The byte length of the Data field in the AEST Processor generic resource
substructure defined in ACPI for the Armv8 RAS Extensions 1.1 is 4Byte.
However, it is defined as a pointer type, and on a 64-bit machine,
it is interpreted as 8 bytes. Therefore, it is changed from a pointer
type unsigned integer 1 byte to an unsigned integer 4 bytes.
Link: https://github.com/acpica/acpica/commit/13b93277
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0420852ffc520b81960e877852703b739c16025c
Added support for Vendor-defined microphone arrays and SNR
(signal-to-noise) extension.
Link: https://github.com/acpica/acpica/commit/0420852f
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 52abebd410945ec55afb4dd8b7150e8a39b5c960
This macro was only ever used when stuffing pointers into physical
addresses and trying to later reconstruct the pointer, which is
implementation-defined as to whether that can be done. Now that all such
operations are gone, the macro is unused, and should be removed to avoid
such practices being reintroduced.
Link: https://github.com/acpica/acpica/commit/52abebd4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit dfa3feffa8f760b686207d09dc880cd2f26c72af
Currently the pointer to the table is cast to acpi_physical_address and
later cast back to a pointer to be dereferenced. Whether or not this is
supported is implementation-defined.
On CHERI, and thus Arm's experimental Morello prototype architecture,
pointers are represented as capabilities, which are unforgeable bounded
pointers, providing always-on fine-grained spatial memory safety. This
means that any pointer cast to a plain integer will lose all its
associated metadata, and when cast back to a pointer it will give a
null-derived pointer (one that has the same metadata as null but an
address equal to the integer) that will trap on any dereference. As a
result, this is an implementation where acpi_physical_address cannot be
used as a hack to store real pointers.
Thus, alter the lifecycle of table descriptors. Internal physical tables
keep the current behaviour where only the address is set on install, and
the pointer is set on acquire. Virtual tables (internal and external)
now store the pointer on initialisation and use that on acquire (which
will redundantly set *table_ptr to itself, but changing that is both
unnecessary and overly complicated as acpi_tb_acquire_table is called with
both a pointer to a variable and a pointer to Table->Pointer itself).
This requires propagating the (possible) table pointer everywhere in
order to make sure pointers make it through to acpi_tb_acquire_temp_table,
which requires a change to the acpi_install_table interface. Instead of
taking an ACPI_PHYSADDR_TYPE and a boolean indicating whether it's
physical or virtual, it is now split into acpi_install_table (that takes
an external virtual table pointer) and acpi_install_physical_table (that
takes an ACPI_PHYSADDR_TYPE for an internal physical table address).
This also has the benefit of providing a cleaner API.
Link: https://github.com/acpica/acpica/commit/dfa3feff
Signed-off-by: Bob Moore <robert.moore@intel.com>
[ rjw: Adjust the code in tables.c to match interface changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d9eb82bd7515989f0b29d79deeeb758db4d6529c
Currently the pointer to the table is cast to acpi_physical_address and
later cast back to a pointer to be dereferenced. Whether or not this is
supported is implementation-defined.
On CHERI, and thus Arm's experimental Morello prototype architecture,
pointers are represented as capabilities, which are unforgeable bounded
pointers, providing always-on fine-grained spatial memory safety. This
means that any pointer cast to a plain integer will lose all its
associated metadata, and when cast back to a pointer it will give a
null-derived pointer (one that has the same metadata as null but an
address equal to the integer) that will trap on any dereference. As a
result, this is an implementation where acpi_physical_address cannot be
used as a hack to store real pointers.
Thus, add a new field to struct acpi_object_region to store the pointer for
table regions, and propagate it to acpi_ex_data_table_space_handler via the
region context, to use a more portable implementation that supports
CHERI.
Link: https://github.com/acpica/acpica/commit/d9eb82bd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1
The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.
Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.
This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.
Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_fetch_acpi_dev() as a more reasonable replacement for
acpi_bus_get_device() and modify the code in scan.c to use it instead
of the latter.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
One case where we hit this issue is camera sensors such as e.g. the OV8865
sensor found on the Microsoft Surface Go. The sensor uses clks, regulators
and GPIOs provided by a TPS68470 PMIC which is described in an INT3472
ACPI device. There is special platform code handling this and setting
platform_data with the necessary consumer info on the MFD cells
instantiated for the PMIC under: drivers/platform/x86/intel/int3472.
For this to work properly the ov8865 driver must not bind to the I2C-client
for the OV8865 sensor until after the TPS68470 PMIC gpio, regulator and
clk MFD cells have all been fully setup.
The OV8865 on the Microsoft Surface Go is just one example, all X86
devices using the Intel IPU3 camera block found on recent Intel SoCs
have similar issues where there is an INT3472 HID ACPI-device, which
describes the clks and regulators, and the driver for this INT3472 device
must be fully initialized before the sensor driver (any sensor driver)
binds for things to work properly.
On these devices the ACPI nodes describing the sensors all have a _DEP
dependency on the matching INT3472 ACPI device (there is one per sensor).
This allows solving the probe-ordering problem by delaying the enumeration
(instantiation of the I2C-client in the ov8865 example) of ACPI-devices
which have a _DEP dependency on an INT3472 device.
The new acpi_dev_ready_for_enumeration() helper used for this is also
exported because for devices, which have the enumeration_by_parent flag
set, the parent-driver will do its own scan of child ACPI devices and
it will try to enumerate those during its probe(). Code doing this such
as e.g. the i2c-core-acpi.c code must call this new helper to ensure
that it too delays the enumeration until all the _DEP dependencies are
met on devices which have the new honor_deps flag set.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-2-hdegoede@redhat.com
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge assorted fixes and cleanups and one new backlight quirk list
item for 5.16-rc1.
* acpica:
ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h
* acpi-ec:
ACPI: EC: Remove initialization of static variables to false
ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
* acpi-pmic:
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
* acpi-video:
ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2
ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
The ACPI_USE_BUILTIN_STDARG symbol is never set in the kernel build,
so stop checking it in include/acpi/platform/acgcc.h and drop all of
the macros depending on it (which appear to duplicate the analogous
macros from linux/stdarg.h, but in fact are never used).
Link: https://lore.kernel.org/linux-acpi/CAHk-=whCammRsz8PEbrft3M6vGjF506gkxtyGw81uGOUUvD51g@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Linus Torvalds <torvalds@linuxfoundation.org>
Store a device's desired enumeration power state in struct
acpi_device_power during acpi_device object's initialisation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA code in the kernel to upstream revision 20210930
including the following changes:
* Fix system-wide resume issue caused by evaluating control
methods too early in the resume path (Rafael Wysocki).
* Add support for Windows 2020 _OSI string (Mario Limonciello).
* Add Generic Port Affinity type for SRAT (Alison Schofield).
* Add disassembly support for the NHLT ACPI table (Bob Moore).
- Avoid flushing caches before entering C3 type of idle states on
AMD processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices
in general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in some drivers (Rafael
Wysocki).
- Check the states of all ACPI power resources during initialization
to avoid dealing with power resources in unknown states (Rafael
Wysocki).
- Fix ACPI power resource issues related to sharing wakeup power
resources (Rafael Wysocki).
- Avoid registering redundant suspend_ops (Rafael Wysocki).
- Report battery charging state as "full" if it appears to be over
the design capacity (André Almeida).
- Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
Schaeckeler).
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it
to inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King).
-----BEGIN PGP SIGNATURE-----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=Ni9a
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision, address some issues related to the ACPI power resources
management, simplify the enumeration of PCI devices having ACPI
companions, add new quirks, fix assorted problems, update the
ACPI-related information in maintainers and clean up code in several
places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20210930
including the following changes:
- Fix system-wide resume issue caused by evaluating control
methods too early in the resume path (Rafael Wysocki).
- Add support for Windows 2020 _OSI string (Mario Limonciello).
- Add Generic Port Affinity type for SRAT (Alison Schofield).
- Add disassembly support for the NHLT ACPI table (Bob Moore).
- Avoid flushing caches before entering C3 type of idle states on AMD
processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices in
general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in some drivers (Rafael
Wysocki).
- Check the states of all ACPI power resources during initialization
to avoid dealing with power resources in unknown states (Rafael
Wysocki).
- Fix ACPI power resource issues related to sharing wakeup power
resources (Rafael Wysocki).
- Avoid registering redundant suspend_ops (Rafael Wysocki).
- Report battery charging state as "full" if it appears to be over
the design capacity (André Almeida).
- Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
Schaeckeler).
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it to
inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King)"
* tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (36 commits)
ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()
perf: qcom_l2_pmu: ACPI: Use ACPI_COMPANION() directly
ACPI: APEI: mark apei_hest_parse() static
ACPI: APEI: EINJ: Relax platform response timeout to 1 second
gpio-amdpt: ACPI: Use the ACPI_COMPANION() macro directly
nouveau: ACPI: Use the ACPI_COMPANION() macro directly
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: AC: Quirk GK45 to skip reading _PSR
ACPI: PM: sleep: Do not set suspend_ops unnecessarily
ACPI: PRM: Handle memory allocation and memory remap failure
ACPI: PRM: Remove unnecessary blank lines
ACPI: PM: Turn off wakeup power resources on _DSW/_PSW errors
ACPI: PM: Fix sharing of wakeup power resources
ACPI: PM: Turn off unused wakeup power resources
ACPI: PM: Check states of power resources during initialization
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: LPSS: Use ACPI_COMPANION() directly
ACPI: scan: Release PM resources blocked by unused objects
ACPI: battery: Accept charges over the design capacity as full
ACPICA: Update version to 20210930
...
Merge APEI, PRM and documentation udpates for 5.16-rc1:
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it
to inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King).
* acpi-apei:
ACPI: APEI: mark apei_hest_parse() static
ACPI: APEI: EINJ: Relax platform response timeout to 1 second
* acpi-prm:
ACPI: PRM: Handle memory allocation and memory remap failure
ACPI: PRM: Remove unnecessary blank lines
* acpi-docs:
Documentation: ACPI: Fix spelling mistake "Millenium" -> "Millennium"
Merge updates of the code associating ACPI device objects with
devices and PNP code, processor driver, and Intel LPSS driver updates
for 5.16-rc1:
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices
in general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in the ACPI driver for Intel
SoCs (Rafael Wysocki).
* acpi-glue:
ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()
ACPI: glue: Look for ACPI bus type only if ACPI companion is not known
ACPI: glue: Drop cleanup callback from struct acpi_bus_type
PCI: ACPI: Drop acpi_pci_bus
* acpi-pnp:
ACPI: PNP: remove duplicated BRI0A49 and BDP3336 entries
* acpi-processor:
ACPI: processor idle: Allow playing dead in C3 state
* acpi-soc:
ACPI: LPSS: Use ACPI_COMPANION() directly
Merge x86-specific ACPI updates, ACPI resources management updates,
one ACPI device enumeration update and miscellaneous ACPI updates for
5.16-rc1:
- Avoid flushing caches before entering C3 type of idle states on
AMD processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
* acpi-x86:
x86: ACPI: cstate: Optimize C3 entry on AMD CPUs
x86/ACPI: Don't add CPUs that are not online capable
ACPICA: Add support for MADT online enabled bit
* acpi-resources:
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: resources: Add DMI-based legacy IRQ override quirk
* acpi-scan:
ACPI: scan: Release PM resources blocked by unused objects
* acpi-misc:
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: Update information in MAINTAINERS
ACPI: Kconfig: Fix a typo in Kconfig
Merge ACPICA updates for 5.16-rc1:
- Fix system-wide resume issue caused by evaluating control methods
too early in the resume path (Rafael Wysocki).
- Add support for Windows 2020 _OSI string (Mario Limonciello).
- Add Generic Port Affinity type for SRAT (Alison Schofield).
- Add disassembly support for the NHLT ACPI table (Bob Moore).
* acpica:
ACPICA: Update version to 20210930
ACPICA: iASL table disassembler: Added disassembly support for the NHLT ACPI table
ACPICA: ACPI 6.4 SRAT: add Generic Port Affinity type
ACPICA: Add support for Windows 2020 _OSI string
ACPICA: Avoid evaluating methods too early during system resume
consolidate msm8994 type apcs_data
- mtk: fix clock id usage
- apple: add driver for ASC/M3 controllers
- pcc: reorganise PCC pcc_mbox_request_channel
add support for PCCT extended PCC subspaces
- misc: make use of devm_platform_ioremap_resource()
change Altera, PCC and Apple mailbox maintainers
-----BEGIN PGP SIGNATURE-----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=pnD9
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- add support for qcm2290
- consolidate msm8994 type apcs_data
mtk:
- fix clock id usage
apple:
- add driver for ASC/M3 controllers
pcc:
- reorganise PCC pcc_mbox_request_channel
- add support for PCCT extended PCC subspaces
misc:
- make use of devm_platform_ioremap_resource()
- change Altera, PCC and Apple mailbox maintainers"
* tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (38 commits)
mailbox: imx: support i.MX8ULP S4 MU
dt-bindings: mailbox: imx-mu: add i.MX8ULP S400 MU support
ACPI/PCC: Add maintainer for PCC mailbox driver
mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe
mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)
mailbox: pcc: Drop handling invalid bit-width in {read,write}_register
mailbox: pcc: Avoid accessing PCCT table in pcc_send_data and pcc_mbox_irq
mailbox: pcc: Add PCC register bundle and associated accessor functions
mailbox: pcc: Rename doorbell ack to platform interrupt ack register
mailbox: pcc: Use PCC mailbox channel pointer instead of standard
mailbox: pcc: Add pcc_mbox_chan structure to hold shared memory region info
mailbox: pcc: Consolidate subspace doorbell register parsing
mailbox: pcc: Consolidate subspace interrupt information parsing
mailbox: pcc: Refactor all PCC channel information into a structure
mailbox: pcc: Fix kernel doc warnings
mailbox: apple: Add driver for Apple mailboxes
dt-bindings: mailbox: Add Apple mailbox bindings
MAINTAINERS: Add Apple mailbox files
mailbox: mtk-cmdq: Fix local clock ID usage
mailbox: mtk-cmdq: Validate alias_id on probe
...
Now that we have all the shared memory region information populated in
the pcc_mbox_chan, let us propagate the pointer to the same as the
return value to pcc_mbox_request channel.
This eliminates the need for the individual users of PCC mailbox to
parse the PCCT subspace entries and fetch the shmem information. This
also eliminates the need for PCC mailbox controller to set con_priv to
PCCT subspace entries. This is required as con_priv is private to the
controller driver to attach private data associated with the channel and
not meant to be used by the mailbox client/users.
Let us convert all the users of pcc_mbox_{request,free}_channel to use
new interface.
Cc: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Currently PCC mailbox controller sets con_priv in each channel to hold
the pointer to pcct subspace entry it corresponds to. The mailbox user
will then fetch this pointer from the channel descriptor they get when
they request for the channel. Using that pointer they then parse the
pcct entry again to fetch all the information about shared memory region.
In order to remove individual users of PCC mailbox parsing the PCCT
subspace entries to fetch same information, let us consolidate the same
in pcc mailbox controller by parsing all the shared memory region
information into a structure that can also hold the mbox_chan pointer it
represent.
This can then be used as main PCC mailbox channel pointer that we can
return as part of pcc_mbox_request_channel instead of standard mailbox
channel pointer.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
apei_hest_parse() is only used in hest.c, so mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ rjw: Minor subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When ACPI tools are compiled, the following error is showed:
$ cd tools/power/acpi
$ make
DESCEND tools/acpidbg
MKDIR include
CP include
CC tools/acpidbg/acpidbg.o
In file included from /home/linux/tools/power/acpi/include/acpi/platform/acenv.h:152,
from /home/linux/tools/power/acpi/include/acpi/acpi.h:22,
from acpidbg.c:9:
/home/linux/tools/power/acpi/include/acpi/platform/acgcc.h:25:10: fatal error: linux/stdarg.h: No such file or directory
29 | #include <linux/stdarg.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
Use the ACPICA logic: just identify when it is used inside the kernel
or by an ACPI tool.
Fixes: c0891ac15f ("isystem: ship and use stdarg.h")
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit e01cc6b3d12b5f73f44d46fa15a7f569c793b328
Version 20210930.
Link: https://github.com/acpica/acpica/commit/e01cc6b3
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 94abe858583de24a425b37cb8e62d56c65c4f3cf
Note: support for Vendor-defined microphone arrays and SNR extensions
are not supported at this time -- mostly due to a lack of example tables.
Actual compiler support for NHLT is forthcoming.
Link: https://github.com/acpica/acpica/commit/94abe858
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 777e11b73e60f0eb606cf20142ef634702b09ba1
Add a new subtable type for SRAT Generic Port Affinity.
It uses the same subtable structure as the existing Generic
Initiator Affinity type.
Link: https://github.com/acpica/acpica/commit/777e11b7
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2dc55de56d2deac30af0b484dd1d65607eb33a9c
Link: 5164e24985
Link: https://github.com/acpica/acpica/commit/2dc55de5
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since PCI was the only user of the ->cleanup callback in struct
acpi_bus_type and it is not using struct acpi_bus_type any more,
drop that callback from there and update acpi_device_notify_remove()
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
This reverts commit 437b38c511.
The memory semantics added in commit 437b38c511 causes SystemMemory
Operation region, whose address range is not described in the EFI memory
map to be mapped as NormalNC memory on arm64 platforms (through
acpi_os_map_memory() in acpi_ex_system_memory_space_handler()).
This triggers the following abort on an ARM64 Ampere eMAG machine,
because presumably the physical address range area backing the Opregion
does not support NormalNC memory attributes driven on the bus.
Internal error: synchronous external abort: 96000410 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+ #462
Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 0.14 02/22/2019
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[...snip...]
Call trace:
acpi_ex_system_memory_space_handler+0x26c/0x2c8
acpi_ev_address_space_dispatch+0x228/0x2c4
acpi_ex_access_region+0x114/0x268
acpi_ex_field_datum_io+0x128/0x1b8
acpi_ex_extract_from_field+0x14c/0x2ac
acpi_ex_read_data_from_field+0x190/0x1b8
acpi_ex_resolve_node_to_value+0x1ec/0x288
acpi_ex_resolve_to_value+0x250/0x274
acpi_ds_evaluate_name_path+0xac/0x124
acpi_ds_exec_end_op+0x90/0x410
acpi_ps_parse_loop+0x4ac/0x5d8
acpi_ps_parse_aml+0xe0/0x2c8
acpi_ps_execute_method+0x19c/0x1ac
acpi_ns_evaluate+0x1f8/0x26c
acpi_ns_init_one_device+0x104/0x140
acpi_ns_walk_namespace+0x158/0x1d0
acpi_ns_initialize_devices+0x194/0x218
acpi_initialize_objects+0x48/0x50
acpi_init+0xe0/0x498
If the Opregion address range is not present in the EFI memory map there
is no way for us to determine the memory attributes to use to map it -
defaulting to NormalNC does not work (and it is not correct on a memory
region that may have read side-effects) and therefore commit
437b38c511 should be reverted, which means reverting back to the
original behavior whereby address ranges that are mapped using
acpi_os_map_memory() default to the safe devicenGnRnE attributes on
ARM64 if the mapped address range is not defined in the EFI memory map.
Fixes: 437b38c511 ("ACPI: Add memory semantics to acpi_os_map_memory()")
Signed-off-by: Jia He <justin.he@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The online enabled bit on newer ACPI implmentations will indicate
whether the CPU is hotpluggable.
Link: http://github.com/acpica/acpica/pull/708/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some systems the nominal_perf value retrieved via CPPC is just
a constant and fetching it doesn't require accessing any registers,
so if it is the only CPPC capability that's needed, it is wasteful
to run cppc_get_perf_caps() in order to get just that value alone,
especially when this is done for CPUs other than the one running
the code.
For this reason, introduce cppc_get_nominal_perf() allowing
nominal_perf to be obtained individually, by generalizing the
existing cppc_get_desired_perf() (and renaming it) so it can be
used to retrieve any specific CPPC capability value.
While at it, clean up the cppc_get_desired_perf() kerneldoc comment
a bit.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
The memory attributes attached to memory regions depend on architecture
specific mappings.
For some memory regions, the attributes specified by firmware (eg
uncached) are not sufficient to determine how a memory region should be
mapped by an OS (for instance a region that is define as uncached in
firmware can be mapped as Normal or Device memory on arm64) and
therefore the OS must be given control on how to map the region to match
the expected mapping behaviour (eg if a mapping is requested with memory
semantics, it must allow unaligned accesses).
Rework acpi_os_map_memory() and acpi_os_ioremap() back-end to split
them into two separate code paths:
acpi_os_memmap() -> memory semantics
acpi_os_ioremap() -> MMIO semantics
The split allows the architectural implementation back-ends to detect
the default memory attributes required by the mapping in question
(ie the mapping API defines the semantics memory vs MMIO) and map the
memory accordingly.
Link: https://lore.kernel.org/linux-arm-kernel/31ffe8fc-f5ee-2858-26c5-0fd8bdd68702@arm.com
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Version 20210730.
ACPICA commit 2195f614e79442beb4d24d7a29a6347493e444e5
Link: https://github.com/acpica/acpica/commit/2195f614
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5acc6818c537888be147d9da6b280a0b8c241a1d
Link: https://github.com/acpica/acpica/commit/5acc6818
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Handle the case where the Command-line Arguments table field
does not exist.
ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6
Link: https://github.com/acpica/acpica/commit/d6487164
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8d49c0b2b78b8a8c5dae4d5ff28432729f4d59f2
Link: https://github.com/acpica/acpica/commit/8d49c0b2
Signed-off-by: Huilong Deng <denghuilong@cdjrlc.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Includes support in the table compiler and the disassembler.
ACPICA commit e75074d84d1207339a048486c2d06ecb935d0092
Link: https://github.com/acpica/acpica/commit/e75074d8
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 71f6428332 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL. That fails miserably, because that helper
inline function is not set up to handle that case.
Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.
Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently it's possible to iterate over the dangling pointer in case the device
suddenly disappears. This may happen becase callers put it at the end of a loop.
Instead, let's move that call inside acpi_dev_get_next_match_dev().
Fixes: 803abec64e ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver")
Fixes: bf263f64e8 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Fixes: edbd1bc495 ("efi/dev-path-parser: Switch to use for_each_acpi_dev_match()")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Including:
- SMMU Updates from Will Deacon:
- SMMUv3: Support stalling faults for platform devices
- SMMUv3: Decrease defaults sizes for the event and PRI queues
- SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia
- SMMUv2: Even more Qualcomm compatible strings
- SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU:
available on x86
- Add the amd_iommu=force_enable command line option to
enable the IOMMU on platforms where they are known to cause
problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
-----BEGIN PGP SIGNATURE-----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=IxNB
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
- Handle device properties with software node API in the ACPI
IORT table parsing code (Heikki Krogerus).
- Unify of_node access in the common device properties code,
constify the acpi_dma_supported() argument pointer and
fix up CONFIG_ACPI=n stubs of some functions related to
device properties (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=aq5E
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These unify device properties access in some pieces of code and make
related changes.
Specifics:
- Handle device properties with software node API in the ACPI IORT
table parsing code (Heikki Krogerus).
- Unify of_node access in the common device properties code, constify
the acpi_dma_supported() argument pointer and fix up CONFIG_ACPI=n
stubs of some functions related to device properties (Andy
Shevchenko)"
* tag 'devprop-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Unify access to of_node
ACPI: scan: Constify acpi_dma_supported() helper function
ACPI: property: Constify stubs for CONFIG_ACPI=n case
ACPI: IORT: Handle device properties with software node API
device property: Retrieve fwnode from of_node via accessor
* acpi-ec:
ACPI: EC: trust DSDT GPE for certain HP laptop
ACPI: EC: Make more Asus laptops use ECDT _GPE
* acpi-apei:
ACPI: APEI: fix synchronous external aborts in user-mode
ACPI: APEI: Don't warn if ACPI is disabled
* acpi-soc:
ACPI: LPSS: Use kstrtol() instead of simple_strtol()
* acpi-misc:
ACPI: NVS: fix doc warnings in nvs.c
ACPI: NUMA: fix typo in a comment
ACPI: OSL: Use DEFINE_RES_IO_NAMED() to simplify code
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: bus: Remove unneeded assignment
ACPI: configfs: Replace ACPI_INFO() with pr_debug()
ACPI: ipmi: Remove address space handler in error path
ACPI: event: Remove redundant initialization of local variable
ACPI: sbshc: Fix fall-through warning for Clang
Extract the code that sets up the IOMMU infrastructure from IORT, since
it can be reused by VIOT. Move it one level up into a new
acpi_iommu_configure_id() function, which calls the IORT parsing
function which in turn calls the acpi_iommu_fwspec_init() helper.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since acpi_bus_put_acpi_device() is a synonym for acpi_dev_put(),
define it as static inline in analogy with the latter.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ACPICA commit bd46cb07e614fd85ea69e54c1f6f0ae0a5fb20ab
This structure is used in to parse PRMT in other Operating Systems
that relies on using subtable headers in order to parse ACPI tables.
Although the PRMT doesn't have "subtables" it has a list of module
information structures that act as subtables.
Link: https://github.com/acpica/acpica/commit/bd46cb07
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some ACPI tables we encounter, devices use the _DEP method to assert
a dependence on other ACPI devices as opposed to the OpRegions that the
specification intends.
We need to be able to find those devices "from" the dependee, so add
a callback and a wrapper to walk over the acpi_dep_list and return
the dependent ACPI device.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_walk_dep_device_list() function is not as generic as its
name implies, serving only to decrement the dependency count for each
dependent device of the input.
Extend it to accept a callback which can be applied to all the
dependencies in acpi_dep_list.
Replace all existing calls to the function with calls to a wrapper,
passing a callback that applies the same dependency reduction.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface parts
Signed-off-by: Daniel Scally <djrscally@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a typo in comment related to the closing #endif of an include-guard.
s/__ACP_NUMA_H/__ACPI_NUMA_H/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Constify arguments to acpi_dma_supported(). The function doesn't need
to change the content of the passed argument and when it's const it
allows to supply the result of other functions that may return a pointer
to a constant object.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ffceba1df23f8dbbc64a1023314ec179b4f5331e
Version 20210604.
Link: https://github.com/acpica/acpica/commit/ffceba1d
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cdf48b141d7da38e47fe4020310033ddd1971f9e
Writing a buffer to a PlatformRtMechanism FieldUnit invokes a
bidirectional transaction. The input buffer contains 26 bytes
containing 9 bytes of status, a command byte and a 16-byte UUID.
This change will will simply pass this incoming buffer to a handler
registered by the OS.
Link: https://github.com/acpica/acpica/commit/cdf48b14
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f70e7593e37c9e29f19be8ad3ef93f3f34799368
Link: https://github.com/acpica/acpica/commit/f70e7593
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 699fc72e56936bebf3b9ba39b6e91bd957b44452
The CXL Fixed Memory Window Structure (CFMWS) is added to the
CXL Early Discovery Table (CEDT). This new structure is defined
in an ECN to the CXL 2.0 specification.
https://www.computeexpresslink.org/spec-landing
Link: https://github.com/acpica/acpica/commit/699fc72e
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5ace82441a34f8d45725f12f6bd2677e79c186a6
CXL 2.0 defines length and version field values for the CHBS.
Include them in the ACPI CEDT table definition.
Link: https://github.com/acpica/acpica/commit/5ace8244
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 81eb9c383e6dee0f1b6620e91e5c3dbb48234831
Includes: Table compiler, disassembler, and template generator.
Link: https://github.com/acpica/acpica/commit/81eb9c38
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1d36b551fa6749e650da1dfd3e809146e6ac6a2e
The ACPI specification v6.3 defines the panel positions in chapter
6.1.8 "_PLD (Physical Location of Device)"
Link: https://github.com/acpica/acpica/commit/1d36b551
Signed-off-by: Fabian Wüthrich <me@fabwu.ch>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 6949e1dd2d92788a994ce657857fe8809159e71e
Includes compiler, disassembler, and template generator.
Link: https://github.com/acpica/acpica/commit/6949e1dd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Includes the table compiler, the disassembler and the template
generator.
ACPICA commit 27a434379e3ecafea5340c0c384789ea2062c4fb
Link: https://github.com/acpica/acpica/commit/27a43437
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Add compiler support for IVRS.
2) Update disassembler support for IVRS.
3) Add a new utility, ut_is_id_integer to determine if a HID/CID is
an integer or a string.
ACPICA commit 7eb0b770cb0efcf089cb217b5f8bafc0c6395a3d
Link: https://github.com/acpica/acpica/commit/7eb0b770
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b5e6bcf69dbb9877481992d5ce86008cfb94f5b8
SVKL (Storage Volume Key Location Table) is used by BIOS/Firmware
to share storage volume encryption key's with OS. It will be used
by userspace to decrypt and mount encrypted drives.
So add SVKL table signature and add it to known signatures array
support SVKL.
You can find details about the SVKL table in TDX specfication
titled "Guest-Host-Communication Interface (GHCI) for Intel
Trust Domain Extensions (Intel® TDX)", sec 4.4 and in ACPI
specification r6.4, sec 5.2.6.
Link: https://software.intel.com/content/dam/develop/external/us/en/documents/intel-tdx-guest-hypervisor-communication-interface.pdf
Link: https://github.com/acpica/acpica/commit/b5e6bcf6
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f1ee04207a212f6c519441e7e25397649ebc4cea
Add Multiprocessor Wakeup Mailbox Structure definition. It is useful
in parsing MADT Wake table.
Link: https://github.com/acpica/acpica/commit/f1ee0420
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-scan:
ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
ACPI: scan: Utilize match_string() API
ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
ACPI: scan: Drop sta argument from acpi_init_device_object()
ACPI: scan: Drop sta argument from acpi_add_single_object()
ACPI: scan: Rearrange checks in acpi_bus_check_add()
ACPI: scan: Fold acpi_bus_type_and_status() into its caller
* acpi-drivers:
ACPI: HED: Drop unused ACPI_MODULE_NAME() definition
* acpi-pm:
ACPI: power: Turn off unused power resources unconditionally
ACPI: scan: Turn off unused power resources during initialization
* acpi-resources:
resource: Prevent irqresource_disabled() from erasing flags
* acpi-messages:
hwmon: acpi_power_meter: Get rid of ACPICA message printing
IIO: acpi-als: Get rid of ACPICA message printing
ACPI: utils: Introduce acpi_evaluation_failure_warn()
ACPI: Drop unused ACPI_*_COMPONENT definitions and update documentation
ACPI: sysfs: Get rid of ACPICA message printing
* acpi-pci:
ACPI: PCI: Replace direct printk() invocations in pci_link.c
ACPI: PCI: Drop ACPI_PCI_COMPONENT that is not used any more
ACPI: PCI: Replace ACPI_DEBUG_PRINT() and ACPI_EXCEPTION()
ACPI: PCI: IRQ: Consolidate printing diagnostic messages
* acpi-processor:
ACPI: processor: perflib: Eliminate redundant status check
ACPI: processor: Get rid of ACPICA message printing
ACPI: processor: idle: Drop extra prefix from pr_notice()
ACPI: processor: Remove initialization of static variable
The macro requires to call acpi_dev_put() on each iteration.
Due to this it doesn't tolerate sudden disappearence of the devices.
Document all these nuances to prevent users blindly call it without
understanding the possible issues.
While at it, add the note to the acpi_dev_get_next_match_dev() and
advertise acpi_dev_put() instead of put_device() in the whole family
of the helper functions.
Fixes: bf263f64e8 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_dev_get() to have a symmetrical API with acpi_dev_put()
and reuse both in ACPI code in drivers/acpi/.
While at it, use acpi_bus_put_acpi_device() in one place instead of
the above.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a getter for the acpi_gbl_reduced_hardware variable so that modules
can check if they are running on an ACPI reduced-hw platform or not.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit eb423b7d5440472d0d2115cb81b52b1b7c56d95a
Link: https://github.com/acpica/acpica/commit/eb423b7d
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8710a708faed728ea2672b8da842b2e9af1cf5bd
IORT revision E.b (ARM DEN 0049E.b) contains a few additions like,
-Added an identifier field in the node descriptors to aid table
cross-referencing.
-Introduced the Reserved Memory Range(RMR) node. This is used
to describe memory ranges that are used by endpoints and require
a unity mapping in SMMU.
-Introduced a flag in the RC node to express support for PRI.
-Added a flag in the RC node to declare support for PASID forward
information.
Please note that IORT Rev E and E.a have known issues and are not
supported.
Link: https://github.com/acpica/acpica/commit/8710a708
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 856a96fdf4b51b2b8da17529df0255e6f51f1b5b
struct acpi_viot_header is missing from identifier table, causing linuxize
failures.
Link: https://github.com/acpica/acpica/commit/856a96fd
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For the table disassembler, decode the subtable type field to a descriptive string.
ACPICA commit 2197e354fb5dcafaddd2016ffeb0620e5bc3d5e2
Link: https://github.com/acpica/acpica/commit/2197e354
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also, update the CEDT template.
ACPICA commit 1e6dded267b13c4aa0c3e16de0fa89d3b9c880e9
Link: https://github.com/acpica/acpica/commit/1e6dded2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit de805b6a355c01f3aff4044a4ba60e9845b7668c
This table displays health information about the platform firmware. For
full definition, see the ACPI specification.
Link: https://github.com/acpica/acpica/commit/de805b6a
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit the result of squashing the following:
ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e
ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c
Link: https://github.com/acpica/acpica/commit/21a316fd
Link: https://github.com/acpica/acpica/commit/f5506fc7
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 036290735ad8020f762c4d94bcbc0e84b2e307b6
Link: https://github.com/acpica/acpica/commit/03629073
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0b03aa8ebd7a5b2b9407893f123ee587af45926f
This sets up all of the boilerplate without actually doing anything.
Link: https://github.com/acpica/acpica/commit/0b03aa8e
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit fc4e33319c1ee08f20f5c44853dd8426643f6dfd
Add definitions for the VIOT table and its subtables.
Link: https://github.com/acpica/acpica/commit/fc4e3331
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 44ca5f4f9be24bf64524cdb1de46322509319056
This entails adding an optional subtable indicating secure access
components as well as two different types of secure access components
(ID-based or Memory). For definitons and uses, consult the ACPI
specification.
Link: https://github.com/acpica/acpica/commit/44ca5f4f
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 44633fa72f1e4ede718733aec16e7fb7572042f8
Link: https://github.com/acpica/acpica/commit/44633fa7
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 18a77ca6fc3edd26a24d8f32ae5c0ea66d84ccff
Link: https://github.com/acpica/acpica/commit/18a77ca6
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also, update struct size to reflect these changes in nfit core driver.
ACPICA commit af60199a9a1de9e6844929fd4cc22334522ed195
Link: https://github.com/acpica/acpica/commit/af60199a
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit squashes the following:
ACPICA commit bc8939e2d902653e71bb1601b129a993c37fcfad
ACPICA commit 2d9e5e98e23f2a569e5691e6bed183146e25798d
ACPICA commit 937358156631ea7a0eef3569c213c82a031097d5
Fix more spelling issues found using the codespell checker and found
without tools.
Link: https://github.com/acpica/acpica/commit/bc8939e2
Link: https://github.com/acpica/acpica/commit/2d9e5e98
Link: https://github.com/acpica/acpica/commit/93735815
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit squashes the following:
ACPICA commit 475c5e89f8f701ccdfee6ca567e33c854ecd6c9e
ACPICA commit 82cf78ac175a4b7d8842c5b786be24031c817cfd
This new subtable is only valid for PPTT version 3.
Elyes fixed a misspelled identifier in this commit.
Link: https://github.com/acpica/acpica/commit/475c5e89
Link: https://github.com/acpica/acpica/commit/82cf78ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 208d7e27ebc473feb4182cc8e58f3789c4efaca6
Link: https://github.com/acpica/acpica/commit/208d7e27
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b9eb6f3a19b816824d6f47a6bc86fd8ce690e04b
Link: https://github.com/acpica/acpica/commit/b9eb6f3a
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 619e6df02edbebe95b2765cdd5159f02607e45fc
This change allows iASL to a list of know UUID's. iASL uses this list
to point out any UUID's that are not publically known.
Link: https://github.com/acpica/acpica/commit/619e6df0
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit eefb865355514048380d921de5efcf30027d6b02
IVHD type 40h uses the same field layout as type 11h, but adds support
for a new device entry type F0h (ACPI HID device entry). The new device
entry type has variable length: after fixed-length fields occupying 22
bytes, there's a field of length up to 255 (as given by the preceding
field).
Link: https://github.com/acpica/acpica/commit/eefb8653
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For convenience, add empty stubs of library functions defined in
cppc_acpi.c for the CONFIG_ACPI_CPPC_LIB unset case.
Because one of them needs to return CPUFREQ_ETERNAL, include
linux/cpufreq.h into the CPPC library header file and drop the
direct inclusion of it from cppc_acpi.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop the definitions of the following symbols:
ACPI_SBS_COMPONENT
ACPI_FAN_COMPONENT
ACPI_CONTAINER_COMPONENT
ACPI_MEMORY_DEVICE_COMPONENT
that are not used in a meaningful way any more and update the ACPI
debug documentation to avoid confusing users by making the impression
that the ACPICA debug can be used for anything other than ACPICA
itself, which is incorrect.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Replace the only ACPI_EXCEPTION() instance in sysfs.c with a
pr_warn() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more and drop the
ACPI_SYSTEM_COMPONENT definition that would not be used any
more in a meaningful way after the above changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for
message printing in the ACPICA code and they should not be used
elsewhere. Special configuration (either kernel command line or
sysfs-based) is needed to see the messages printed by them and
the format of those messages is also special and convoluted.
For this reason, replace all of the ACPI_DEBUG_PRINT() and
ACPI_EXCEPTION() instances in the ACPI processor driver with
corresponding dev_*(), acpi_handle_*() and pr_*() calls depending
on the context in which they appear.
Also drop the ACPI_PROCESSOR_COMPONENT definition that is not going
to be necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
After dropping all of the code using ACPI_PCI_COMPONENT drop the
definition of it too and update the documentation to remove all
ACPI_PCI_COMPONENT references from it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Including:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance
on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU (perf) driver to be built
independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic
IO-page-table framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI Support for Renesas IOMMU driver
- Misc Cleanups and other small improvments
-----BEGIN PGP SIGNATURE-----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=xSX1
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU perf driver to be built independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic IO-page-table
framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI support for Renesas IOMMU driver
- Misc cleanups and other small improvments
* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
iommu/amd: Fix performance counter initialization
MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
iommu/mediatek: Fix error code in probe()
iommu/mediatek: Fix unsigned domid comparison with less than zero
iommu/vt-d: Parse SATC reporting structure
iommu/vt-d: Add new enum value and structure for SATC
iommu/vt-d: Add iotlb_sync_map callback
iommu/vt-d: Move capability check code to cap_audit files
iommu/vt-d: Audit IOMMU Capabilities and add helper functions
iommu/vt-d: Fix 'physical' typos
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmAtJ+IACgkQCF8+vY7k
4RX8eBAAhTzVFopTBMAW2+FjBTtUGwn+LnrIG9O1HrFp4yjTfe/MnZWXkVRZXjqo
cYZehdab0j8636aLTs86Y6mEMHGPdm6V0hQhgvXoy7FqQqLq52K1bpXL+4a0lNYx
HE8OLbOvSM49RlP9ZU978NuUzfWLCW+dGlXuGxdJDU/fmbKdaSjvelRjjfNFhBo3
ENK2LXVnebvtttjq4uSQ5LjeJEBBsIldK947/lvu7zJnnfDlXXdtrsuonkWvRp+s
8M1+AQ0F/edKX1atXSCZZqLNhUNaswHWc6lMmIL8qGvMZjZffWi4KwfcB0XXvrAW
IJYfaLQ9kvEaFaSLZ3E5dCPO5CQLUkR4YOmSSUdK16fpyb1WzVjWsKPUjxsk5IeB
IitjX5KkP5T+uA8pmzQE9dX2Do7no9A/765f2uqpaQxYbze1IT+6qWMisLrlguZe
NV10Fah2dSehmqqfnnIjDE40rP3iff6xKheTeLzF1e4j8JiNDPCRI8z1i8M2OJ1e
jIEC4Pq4/mGmn+InJOzxPloel1CnCL+d0bU/wrAhEyg0Ss+M95/+KgK6LCEzgyei
/+2II2tABxtanO8mxp4jts3jPduqVuV9EEpWquzf9bPqFy5mBFD3NbOJNn/5ZVlx
/DhvjRxiEedQihQ9Pt0OQxiJm6InopaeTihAvMQrMH3nLBsF2/Y=
=/wKL
-----END PGP SIGNATURE-----
Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmArly8THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXkRfCADB0PA4xlfVF0Na/iZoBFdNFr3EMU4K
NddGJYyk0o+gipUIj2xu7TksVw8c1/cWilXOUBe7oZRKw2/fC/0hpDwvLpPtD/wP
+Tc2DcIgwquMvsSksyqpMOb0YjNNhWCx9A9xPWawpUdg20IfbK/ekRHlFI5MsEww
7tFS+MHY4QbsPv0WggoK61PGnhGCBt/85Lv4I08ZGohA6uirwC4fNIKp83SgFNtf
1hHbvpapAFEXwZiKFbzwpue20jWJg+tlTiEFpen3exjBICoagrLLaz3F0SZJvbxl
2YY32zbBsQe4Izre5PVuOlMoNFRom9NSzEzdZT10g7HNtVrwKVNLcohS
=MyO4
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- VMBus hardening patches from Andrea Parri and Andres Beltran.
- Patches to make Linux boot as the root partition on Microsoft
Hypervisor from Wei Liu.
- One patch to add a new sysfs interface to support hibernation on
Hyper-V from Dexuan Cui.
- Two miscellaneous clean-up patches from Colin and Gustavo.
* tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits)
Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"
iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
x86/hyperv: implement an MSI domain for root partition
asm-generic/hyperv: import data structures for mapping device interrupts
asm-generic/hyperv: introduce hv_device_id and auxiliary structures
asm-generic/hyperv: update hv_interrupt_entry
asm-generic/hyperv: update hv_msi_entry
x86/hyperv: implement and use hv_smp_prepare_cpus
x86/hyperv: provide a bunch of helper functions
ACPI / NUMA: add a stub function for node_to_pxm()
x86/hyperv: handling hypercall page setup for root
x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
x86/hyperv: allocate output arg pages if required
clocksource/hyperv: use MSR-based access if running as root
Drivers: hv: vmbus: skip VMBus initialization if Linux is root
x86/hyperv: detect if Linux is the root partition
asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT
hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate
hv_netvsc: Restrict configurations on isolated guests
Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests
...
* acpi-messages:
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
There is already a stub function for pxm_to_node but conversion to the
other direction is missing.
It will be used by Microsoft Hypervisor code later.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210203150435.27941-9-wei.liu@kernel.org
Replace the ACPI_DEBUG_PRINT() instances in thermal.c with
acpi_handle_debug() calls and modify the ACPI_THERMAL_TRIPS_EXCEPTION()
macro in there to use acpi_handle_info() internally, which among other
things causes the excessive log level of the messages printed by it to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from thermal.c, drop the no longer needed
ACPI_THERMAL_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to thermal.c, drop the PREFIX
definition from there and replace some pr_warn() calls with pr_info()
or acpi_handle_info() to reduce the excessive log level and (in the
latter case) facilitate easier identification of the message source.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls,
which among other things causes the excessive log levels of those
messages to be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.
Also make unrelated janitorial changes to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
definition from the headers and update the documentation accordingly.
While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c. Also adapt the existing
pr_info() calls to the new pr_fmt() definition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in ac.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_AC_COMPONENT definition
from the headers and update the documentation accordingly.
While at it, replace the direct printk() invocation with pr_info(),
add a pr_fmt() definition to ac.c and drop the unneeded PREFIX
symbol definition from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
After dropping all of the code using ACPI_BUS_COMPONENT drop it
too and modify the example in the documentation using it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the remaining ACPI_DEBUG_PRINT() instances in device_pm.c
with dev_dbg() invocations, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, and drop the no longer needed
ACPI_POWER_COMPONENT definition from the headers and documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Starting from Intel Platform VT-d v3.2, BIOS may provide new remapping
structure SATC for SOC integrated devices, according to section 8.8 of
Intel VT-d architecture specification v3.2. The SATC structure reports
a list of the devices that require ATS for normal device operation. It
is a functional requirement that these devices will not work without OS
enabling ATS capability.
This patch introduces the new enum value and structure to represent the
remapping information. Kernel should parse the information from the
reporting structure and enable ATC for the devices as needed.
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210203093329.1617808-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210204014401.2846425-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To ensure we handle situations in which multiple sensors of the same
model (and therefore _HID) are present in a system, we need to be able
to iterate over devices matching a known _HID but unknown _UID and _HRV
- add acpi_dev_get_next_match_dev() to accommodate that possibility and
change acpi_dev_get_first_match_dev() to simply call the new function
with a NULL starting point. Add an iterator macro for convenience.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cpc_reg address does not represent either an I/O virtual address,
nor a field located in iomem. This address is used as an address offset
which eventually is given as physical address argument to ioremap or PCC
space offset to GET_PCC_VADDR. Therefore, having the __iomem annotation
does not make sense.
Fix the following sparse warnings by removing the __iomem annotation
for cpc_reg's address.
drivers/acpi/cppc_acpi.c:762:37: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:765:48: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:948:25: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:954:67: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:987:25: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:993:68: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1120:13: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1134:13: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1137:13: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1182:14: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1212:13: warning: dereference of noderef expression
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 28cb42013541950cf378582a5a5a5587061498ca
Version 20210105.
Link: https://github.com/acpica/acpica/commit/28cb4201
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This affects all ACPICA source code modules.
ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4
Link: https://github.com/acpica/acpica/commit/c570953c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4534cc3700f73c88e2f6a0e0f0b9efe4fc644757
The VRTC table is no longer in use and is not defined by the ACPI
specification. Remove the table from the known, allowed tables.
Link: https://github.com/acpica/acpica/commit/4534cc37
Signed-off-by: Al Stone <ahs3@ahs3.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2c39dcccda4dc250a44379ae086b8b1a3fdad115
This table is no longer in use, and is not officially defined
in the ACPI specification.
Link: https://github.com/acpica/acpica/commit/2c39dccc
Signed-off-by: Al Stone <ahs3@ahs3.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 830dcc2b4fd2de8f0c63f1c366f51da276fe3d85
Version 20201217.
Link: https://github.com/acpica/acpica/commit/830dcc2b
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4b9135f5774caa796ddf826448811e8e7f08ef2f
GCC 7.1 gained -Wimplicit-fallthrough to warn on implicit fallthrough,
as well as __attribute__((__fallthrough__)) and comments to explicitly
denote that cases of fallthrough were intentional. Clang also supports
this warning and statement attribute, but not the comment form.
Robert Moore provides additional context about the lint comments being
removed. They were for "an old version of PC-Lint, which we don't use
anymore." Drop those.
This will help us enable -Wimplicit-fallthrough throughout the Linux
kernel.
Suggested-by: Robert Moore <robert.moore@intel.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://github.com/acpica/acpica/commit/4b9135f5
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e
The macros to classify different AML exception codes are broken. For
instance,
ACPI_ENV_EXCEPTION(Status)
will always evaluate to zero due to
#define AE_CODE_ENVIRONMENTAL 0x0000
#define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL)
Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero
value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES,
as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests.
This commit fixes those checks.
Fixes: d46b6537f0 ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load")
Link: https://github.com/acpica/acpica/commit/1a3a5492
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so
as to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given
CPU has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC
cpufreq driver and make it export frequency domains information
to user space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop
a redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal).
-----BEGIN PGP SIGNATURE-----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=AcdB
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore).
* Remove extreaneous "the" in comments (Colin Ian King).
* Add function trace macros to improve debugging (Erik Kaneda).
* Fix interpreter memory leak (Erik Kaneda).
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede).
- Introduce resource_union() and resource_intersection() helpers
and clean up some resource-manipulation code with the help of
them (Andy Shevchenko).
- Revert problematic commit related to the handling of resources
in the ACPI core (Daniel Scally).
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the
latter (Flavio Suligoi).
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki).
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior).
- Clean up the advance_transaction() routine and related code in
the ACPI EC driver (Rafael Wysocki).
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper
St. Pierre).
- Make assorted janitorial changes in several ACPI-related pieces
of code (Hanjun Guo, Jason Yan, Punit Agrawal).
-----BEGIN PGP SIGNATURE-----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=5LZe
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20201113, fix and clean up some resources manipulation code, extend
the enumeration and gpio-line-names property documentation, clean up
the handling of _DEP during device enumeration, add a new backlight
DMI quirk, clean up transaction handling in the EC driver and make
some assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore)
* Remove extreaneous "the" in comments (Colin Ian King)
* Add function trace macros to improve debugging (Erik Kaneda)
* Fix interpreter memory leak (Erik Kaneda)
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)
- Introduce resource_union() and resource_intersection() helpers and
clean up some resource-manipulation code with the help of them
(Andy Shevchenko)
- Revert problematic commit related to the handling of resources in
the ACPI core (Daniel Scally)
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the latter
(Flavio Suligoi)
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki)
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior)
- Clean up the advance_transaction() routine and related code in the
ACPI EC driver (Rafael Wysocki)
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
Pierre)
- Make assorted janitorial changes in several ACPI-related pieces of
code (Hanjun Guo, Jason Yan, Punit Agrawal)"
* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: processor: Drop duplicate setting of shared_cpu_map
ACPI: EC: Clean up status flags checks in advance_transaction()
ACPI: EC: Untangle error handling in advance_transaction()
ACPI: EC: Simplify error handling in advance_transaction()
ACPI: EC: Rename acpi_ec_is_gpe_raised()
...
The cppc_cpudata per-cpu storage was inefficient (1) additional to causing
functional issues (2) when CPUs are hotplugged out, due to per-cpu data
being improperly initialised.
(1) The amount of information needed for CPPC performance control in its
cpufreq driver depends on the domain (PSD) coordination type:
ANY: One set of CPPC control and capability data (e.g desired
performance, highest/lowest performance, etc) applies to all
CPUs in the domain.
ALL: Same as ANY. To be noted that this type is not currently
supported. When supported, information about which CPUs
belong to a domain is needed in order for frequency change
requests to be sent to each of them.
HW: It's necessary to store CPPC control and capability
information for all the CPUs. HW will then coordinate the
performance state based on their limitations and requests.
NONE: Same as HW. No HW coordination is expected.
Despite this, the previous initialisation code would indiscriminately
allocate memory for all CPUs (all_cpu_data) and unnecessarily
duplicate performance capabilities and the domain sharing mask and type
for each possible CPU.
(2) With the current per-cpu structure, when having ANY coordination,
the cppc_cpudata cpu information is not initialised (will remain 0)
for all CPUs in a policy, other than policy->cpu. When policy->cpu is
hotplugged out, the driver will incorrectly use the uninitialised (0)
value of the other CPUs when making frequency changes. Additionally,
the previous values stored in the perf_ctrls.desired_perf will be
lost when policy->cpu changes.
Therefore replace the array of per cpu data with a list. The memory for
each structure is allocated at policy init, where a single structure
can be allocated per policy, not per cpu. In order to accommodate the
struct list_head node in the cppc_cpudata structure, the now unused cpu
and cur_policy variables are removed.
For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1,
(4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows:
Before patch:
- ANY coordination:
total slack req alloc/free caller
0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810
0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808
128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070
768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4
After patch:
- ANY coordination:
total slack req alloc/free caller
256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410
0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274
Additional notes:
- A pointer to the policy's cppc_cpudata is stored in policy->driver_data
- Driver registration is skipped if _CPC entries are not present.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-apei:
ACPI, APEI: make apei_resources_all static
* acpi-misc:
ACPI: acpi_drivers.h: Update the kernel doc
ACPI: acpi_drivers.h: Remove the leftover dead code
ACPI: tiny-power-button: Simplify the code using module_acpi_driver()
ACPI: SBS: Simplify the code using module_acpi_driver()
ACPI: SBS: Simplify the driver init code
ACPI: debug: Remove the not used function
ACPI: processor: Remove the duplicated ACPI_PROCESSOR_CLASS macro
* acpi-processor:
ACPI: processor: Drop duplicate setting of shared_cpu_map
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.
However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.
For instance, suppose that there are two devices below a bridge and
they both can signal wakeup. Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.
Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it. Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1. This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.
Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.
To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.
Fixes: 1ba51a7c14 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
