If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, thp: do not cause memcg oom for thp
mm/vmscan: wake up flushers for legacy cgroups too
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
h8300: remove extraneous __BIG_ENDIAN definition
hugetlbfs: check for pgoff value overflow
lockdep: fix fs_reclaim warning
MAINTAINERS: update Mark Fasheh's e-mail
mm/mempolicy.c: avoid use uninitialized preferred_node
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
-----BEGIN PGP SIGNATURE-----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=oGAf
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
"Just one fix for an occasional panic from Jeff Layton"
* tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux:
nfsd: remove blocked locks on client teardown
The sysfs_create_link_nowarn() is going to be used in phylib framework in
subsequent patch which can be built as module. Hence, export
sysfs_create_link_nowarn() to avoid build errors.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a399546049 ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had some reports of panics in nfsd4_lm_notify, and that showed a
nfs4_lockowner that had outlived its so_client.
Ensure that we walk any leftover lockowners after tearing down all of
the stateids, and remove any blocked locks that they hold.
With this change, we also don't need to walk the nbl_lru on nfsd_net
shutdown, as that will happen naturally when we tear down the clients.
Fixes: 76d348fadf (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks)
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=bXFe
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"There's an important revert in this pull request that needs to go to
stable as it causes a corruption on big endian machines.
The other fix is for FIEMAP incorrectly reporting shared extents
before a sync and one fix for a crash in raid56.
So far we got only one report about the BE corruption, the stable
kernels were out for like a week, so hopefully the scope of the damage
is low"
* tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: use proper endianness accessors for super_copy"
btrfs: add missing initialization in btrfs_check_shared
btrfs: Fix NULL pointer exception in find_bio_stripe
This reverts commit 3c181c12c4.
The offending patch was merged in 4.16-rc4 and was promptly applied to
stable kernels 4.14.25 and 4.15.8.
The patch causes a corruption in several superblock items on big-endian
machines because of messed up endianity conversions. The damage is
manually repairable. A filesystem cannot be mounted again after it has
been unmounted once.
We do a full revert and not a fixup so stable can pick that patch ASAP.
Fixes: 3c181c12c4 ("btrfs: use proper endianness accessors for super_copy")
Link: https://lkml.kernel.org/r/1521139304@msgid.manchmal.in-ulm.de
CC: stable@vger.kernel.org # 4.14+
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull vfs fixes from Al Viro:
- backport-friendly part of lock_parent() race fix
- a fix for an assumption in the heurisic used by path_connected() that
is not true on NFS
- livelock fixes for d_alloc_parallel()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Teach path_connected to handle nfs filesystems with multiple roots.
fs: dcache: Use READ_ONCE when accessing i_dir_seq
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem. The subsets can be from
disjoint directory trees. The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.
The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem. The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.
This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.
When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.
The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount. This move can happen either locally or
remotely. With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.
If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check. As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.
The is_subdir function might be cheap enough that we can call it
unconditionally. Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to. So I am avoiding that for now.
Filesystems with snapshots such as nilfs and btrfs do something
similar. But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425dc2 ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch addresses an issue that causes fiemap to falsely
report a shared extent. The test case is as follows:
xfs_io -f -d -c "pwrite -b 16k 0 64k" -c "fiemap -v" /media/scratch/file5
sync
xfs_io -c "fiemap -v" /media/scratch/file5
which gives the resulting output:
wrote 65536/65536 bytes at offset 0
64 KiB, 4 ops; 0.0000 sec (121.359 MiB/sec and 7766.9903 ops/sec)
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x2001
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
This is because btrfs_check_shared calls find_parent_nodes
repeatedly in a loop, passing a share_check struct to report
the count of shared extent. But btrfs_check_shared does not
re-initialize the count value to zero for subsequent calls
from the loop, resulting in a false share count value. This
is a regressive behavior from 4.13.
With proper re-initialization the test result is as follows:
wrote 65536/65536 bytes at offset 0
64 KiB, 4 ops; 0.0000 sec (110.035 MiB/sec and 7042.2535 ops/sec)
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
which corrects the regression.
Fixes: 3ec4d3238a ("btrfs: allow backref search checks for shared extents")
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
[ add text from cover letter to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
While converting ioctx index from a list to a table, db446a08c2
("aio: convert the ioctx list to table lookup v3") missed tagging
kioctx_table->table[] as an array of RCU pointers and using the
appropriate RCU accessors. This introduces a small window in the
lookup path where init and access may race.
Mark kioctx_table->table[] with __rcu and use the approriate RCU
accessors when using the field.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: db446a08c2 ("aio: convert the ioctx list to table lookup v3")
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.12+
While fixing refcounting, e34ecee2ae ("aio: Fix a trinity splat")
incorrectly removed explicit RCU grace period before freeing kioctx.
The intention seems to be depending on the internal RCU grace periods
of percpu_ref; however, percpu_ref uses a different flavor of RCU,
sched-RCU. This can lead to kioctx being freed while RCU read
protected dereferences are still in progress.
Fix it by updating free_ioctx() to go through call_rcu() explicitly.
v2: Comment added to explain double bouncing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: e34ecee2ae ("aio: Fix a trinity splat")
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.13+
Hightlights include the following stable fixes:
- NFS: Fix an incorrect type in struct nfs_direct_req
- pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
- NFS: Fix unstable write completion
-----BEGIN PGP SIGNATURE-----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=IQGX
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Hightlights include the following stable fixes:
- NFS: Fix an incorrect type in struct nfs_direct_req
- pNFS: Prevent the layout header refcount going to zero in
pnfs_roc()
- NFS: Fix unstable write completion"
* tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix unstable write completion
pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
NFS: Fix an incorrect type in struct nfs_direct_req
Pull overlayfs fixes from Miklos Szeredi:
"This fixes a corner case for NFS exporting (introduced in this cycle)
as well as fixing miscellaneous bugs"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update Kconfig texts
ovl: redirect_dir=nofollow should not follow redirect for opaque lower
ovl: fix ptr_ret.cocci warnings
ovl: check ERR_PTR() return value from ovl_lookup_real()
ovl: check lower ancestry on encode of lower dir file handle
ovl: hash non-dir by lower inode for fsnotify
- Fix some iomap locking problems
- Don't allocate cow blocks when we're zeroing file data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=T9nM
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix some iomap locking problems
- Don't allocate cow blocks when we're zeroing file data
* tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't block on the ilock for RWF_NOWAIT
xfs: don't start out with the exclusive ilock for direct I/O
xfs: don't allocate COW blocks for zeroing holes or unwritten extents
We do want to respect the FLUSH_SYNC argument to nfs_commit_inode() to
ensure that all outstanding COMMIT requests to the inode in question are
complete. Currently we may exit early from both nfs_commit_inode() and
nfs_write_inode() even if there are COMMIT requests in flight, or unstable
writes on the commit list.
In order to get the right semantics w.r.t. sync_inode(), we don't need
to have nfs_commit_inode() reset the inode dirty flags when called from
nfs_wb_page() and/or nfs_wb_all(). We just need to ensure that
nfs_write_inode() leaves them in the right state if there are outstanding
commits, or stable pages.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: dc4fd9ab01 ("nfs: don't wait on commit in nfs_commit_inode()...")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that we hold a reference to the layout header when processing
the pNFS return-on-close so that the refcount value does not inadvertently
go to zero.
Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.10+
Tested-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
The start offset needs to be of type loff_t.
Fixed: 5fadeb47dc ("nfs: count DIO good bytes correctly with mirroring")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It turns out that commit 3229c18c0d6b2 'Fixes to "Implement iomap for
block_map"' introduced another bug in gfs2_iomap_begin that can cause
gfs2_block_map to set bh->b_size of an actual buffer to 0. This can
lead to arbitrary incorrect behavior including crashes or disk
corruption. Revert the incorrect part of that commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add some hints about overlayfs kernel config options.
Enabling NFS export by default is especially recommended against, as it
incurs a performance penalty even if the filesystem is not actually
exported.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlqbuK8ACgkQxWXV+ddt
WDsiVQ//eE8Axfw4qWOyHHjozoAIu9kifvOFQIhvKviLiXHJNrD/vBI6YwD1hyD1
rbbLilMsEl1OD1Sq3AeOUMNSSl5qUFEB+CA8vg9GznFTNRobTkL+p96Zt5xlRDu3
lsFFV93tED+dK4D/eSGP+xYbknA8hIk/2gWPkd6hpYKyh2QdsPBYDqCnaEXvd79P
DIP/cAjIfzqQn0FTiZ9wbaES+LPO+NoZgQRC2w9McYQ5CEMc+oAChEmPJRwpPoKy
YdhuwoULniRNHVnVOIVfi4w9jkSPSz7YIgLeRFli/WGBYGcKeHTMFkMa12KdpuUC
JUclOogJ5ZMbFV3C0W8XEJ7Vb9ltIevrH8MgfKP/3BScuZzbJZ+n5KkH2Gf7vcpe
w5cZGOsKDz+35fDCdTmsFpDK9kpGzHq48JlRifOjARbdyqNwVq4emxOeQlO1ygzq
Y9H5UeMpp/FDAm6g/bV8ezCXzwuwUDV9CwAJBD+WCiZhD2nX85FfIp1kfF2zLcUg
Y8irqV6A/J/0BFkF7Iu9AuzTxOdo6zMLkcHEKb+sL7yGxZ2248v5gZxDoyV5iNWR
WY4Y2GaMemZGu6+NyyLFAJzlFyACD5fSy8vT7KD6upCzwmlAtaJ3VULfTrLyi/uM
SNZAKf3WzKBVe5h52GNGRCi5OLTteH6Yqz5m5/h8r74mBO00IrA=
=bF96
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- when NR_CPUS is large, a SRCU structure can significantly inflate
size of the main filesystem structure that would not be possible to
allocate by kmalloc, so the kvalloc fallback is used
- improved error handling
- fix endiannes when printing some filesystem attributes via sysfs,
this is could happen when a filesystem is moved between different
endianity hosts
- send fixes: the NO_HOLE mode should not send a write operation for a
file hole
- fix log replay for for special files followed by file hardlinks
- fix log replay failure after unlink and link combination
- fix max chunk size calculation for DUP allocation
* tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix log replay failure after unlink and link combination
Btrfs: fix log replay failure after linking special file and fsync
Btrfs: send, fix issuing write op when processing hole in no data mode
btrfs: use proper endianness accessors for super_copy
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster
btrfs: handle failure of add_pending_csums
btrfs: use kvzalloc to allocate btrfs_fs_info
delayed and three error path memory leak fixups from Chengguang.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJamV3qAAoJEEp/3jgCEfOLv6kIAI0RXShR20dz9M3GnL2bDws7
KFkC/aNwbviXMAih3q7Q7ZiwXv6BI/uUK0YIYG/tWZoNHucYGS8ZOFDikdiIMcJR
2VP8Yas1/NvnLlh0ut45s2imvbXinkHcjWOLqgJJmJ2cEP9Ar/mbwz//TgfVMdNm
TSHEm2LPRge9jK3Ab/ZiatExGH6dx5hRJvssSauF+f2iN+q4nKj2aBqle+FKaNWT
Iv0ONi2f7aXnaXRvum4Y1gnKWXzKSFd8Y2Cr5R3tfTrKBv8nmQz54eRsMnnuxK/7
uV6Ujch4LUXBI1etXLqTwRdZQIcw3Li5PYxGrO8fl8mQfJau9yv5REw/rbgB5FU=
=f8gA
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A cap handling fix from Zhi that ensures that metadata writeback isn't
delayed and three error path memory leak fixups from Chengguang"
* tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-client:
ceph: fix potential memory leak in init_caches()
ceph: fix dentry leak when failing to init debugfs
libceph, ceph: avoid memory leak when specifying same option several times
ceph: flush dirty caps of unlinked inode ASAP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AMhV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180302' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This is a little larger than
usual at this time, but that's mainly because I was out on vacation
last week. Nothing in here is major in any way, it's just two weeks of
fixes. This contains:
- NVMe pull from Keith, with a set of fixes from the usual suspects.
- mq-deadline zone unlock fix from Damien, fixing an issue with the
SMR zone locking added for 4.16.
- two bcache fixes sent in by Michael, with changes from Coly and
Tang.
- comment typo fix from Eric for blktrace.
- return-value error handling fix for nbd, from Gustavo.
- fix a direct-io case where we don't defer to a completion handler,
making us sleep from IRQ device completion. From Jan.
- a small series from Jan fixing up holes around handling of bdev
references.
- small set of regression fixes from Jiufei, mostly fixing problems
around the gendisk pointer -> partition index change.
- regression fix from Ming, fixing a boundary issue with the discard
page cache invalidation.
- two-patch series from Ming, fixing both a core blk-mq-sched and
kyber issue around token freeing on a requeue condition"
* tag 'for-linus-20180302' of git://git.kernel.dk/linux-block: (24 commits)
block: fix a typo
block: display the correct diskname for bio
block: fix the count of PGPGOUT for WRITE_SAME
mq-deadline: Make sure to always unlock zones
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nbd: fix return value in error handling path
bcache: fix kcrashes with fio in RAID5 backend dev
bcache: correct flash only vols (check all uuids)
blktrace_api.h: fix comment for struct blk_user_trace_setup
blockdev: Avoid two active bdev inodes for one device
genhd: Fix BUG in blkdev_open()
genhd: Fix use after free in __blkdev_get()
genhd: Add helper put_disk_and_module()
genhd: Rename get_disk() to get_disk_and_module()
genhd: Fix leaked module reference for NVME devices
direct-io: Fix sleep in atomic due to sync AIO
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
block: kyber: fix domain token leak during requeue
blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch
...
Fix xfs_file_iomap_begin to trylock the ilock if IOMAP_NOWAIT is passed,
so that we don't block io_submit callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no reason to take the ilock exclusively at the start of
xfs_file_iomap_begin for direct I/O, given that it will be demoted
just before calling xfs_iomap_write_direct anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The iomap zeroing interface is smart enough to skip zeroing holes or
unwritten extents. Don't subvert this logic for reflink files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is lack of cache destroy operation for ceph_file_cachep
when failing from fscache register.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we have a file with 2 (or more) hard links in the same directory,
remove one of the hard links, create a new file (or link an existing file)
in the same directory with the name of the removed hard link, and then
finally fsync the new file, we end up with a log that fails to replay,
causing a mount failure.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ touch /mnt/testdir/foo
$ ln /mnt/testdir/foo /mnt/testdir/bar
$ sync
$ unlink /mnt/testdir/bar
$ touch /mnt/testdir/bar
$ xfs_io -c "fsync" /mnt/testdir/bar
<power failure>
$ mount /dev/sdb /mnt
mount: mount(2) failed: /mnt: No such file or directory
When replaying the log, for that example, we also see the following in
dmesg/syslog:
[71813.671307] BTRFS info (device dm-0): failed to delete reference to bar, inode 258 parent 257
[71813.674204] ------------[ cut here ]------------
[71813.675694] BTRFS: Transaction aborted (error -2)
[71813.677236] WARNING: CPU: 1 PID: 13231 at fs/btrfs/inode.c:4128 __btrfs_unlink_inode+0x17b/0x355 [btrfs]
[71813.679669] Modules linked in: btrfs xfs f2fs dm_flakey dm_mod dax ghash_clmulni_intel ppdev pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper evdev psmouse i2c_piix4 parport_pc i2c_core pcspkr sg serio_raw parport button sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel floppy virtio e1000 scsi_mod [last unloaded: btrfs]
[71813.679669] CPU: 1 PID: 13231 Comm: mount Tainted: G W 4.15.0-rc9-btrfs-next-56+ #1
[71813.679669] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
[71813.679669] RIP: 0010:__btrfs_unlink_inode+0x17b/0x355 [btrfs]
[71813.679669] RSP: 0018:ffffc90001cef738 EFLAGS: 00010286
[71813.679669] RAX: 0000000000000025 RBX: ffff880217ce4708 RCX: 0000000000000001
[71813.679669] RDX: 0000000000000000 RSI: ffffffff81c14bae RDI: 00000000ffffffff
[71813.679669] RBP: ffffc90001cef7c0 R08: 0000000000000001 R09: 0000000000000001
[71813.679669] R10: ffffc90001cef5e0 R11: ffffffff8343f007 R12: ffff880217d474c8
[71813.679669] R13: 00000000fffffffe R14: ffff88021ccf1548 R15: 0000000000000101
[71813.679669] FS: 00007f7cee84c480(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000
[71813.679669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71813.679669] CR2: 00007f7cedc1abf9 CR3: 00000002354b4003 CR4: 00000000001606e0
[71813.679669] Call Trace:
[71813.679669] btrfs_unlink_inode+0x17/0x41 [btrfs]
[71813.679669] drop_one_dir_item+0xfa/0x131 [btrfs]
[71813.679669] add_inode_ref+0x71e/0x851 [btrfs]
[71813.679669] ? __lock_is_held+0x39/0x71
[71813.679669] ? replay_one_buffer+0x53/0x53a [btrfs]
[71813.679669] replay_one_buffer+0x4a4/0x53a [btrfs]
[71813.679669] ? rcu_read_unlock+0x3a/0x57
[71813.679669] ? __lock_is_held+0x39/0x71
[71813.679669] walk_up_log_tree+0x101/0x1d2 [btrfs]
[71813.679669] walk_log_tree+0xad/0x188 [btrfs]
[71813.679669] btrfs_recover_log_trees+0x1fa/0x31e [btrfs]
[71813.679669] ? replay_one_extent+0x544/0x544 [btrfs]
[71813.679669] open_ctree+0x1cf6/0x2209 [btrfs]
[71813.679669] btrfs_mount_root+0x368/0x482 [btrfs]
[71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6
[71813.679669] ? __lockdep_init_map+0x176/0x1c2
[71813.679669] ? mount_fs+0x64/0x10b
[71813.679669] mount_fs+0x64/0x10b
[71813.679669] vfs_kern_mount+0x68/0xce
[71813.679669] btrfs_mount+0x13e/0x772 [btrfs]
[71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6
[71813.679669] ? __lockdep_init_map+0x176/0x1c2
[71813.679669] ? mount_fs+0x64/0x10b
[71813.679669] mount_fs+0x64/0x10b
[71813.679669] vfs_kern_mount+0x68/0xce
[71813.679669] do_mount+0x6e5/0x973
[71813.679669] ? memdup_user+0x3e/0x5c
[71813.679669] SyS_mount+0x72/0x98
[71813.679669] entry_SYSCALL_64_fastpath+0x1e/0x8b
[71813.679669] RIP: 0033:0x7f7cedf150ba
[71813.679669] RSP: 002b:00007ffca71da688 EFLAGS: 00000206
[71813.679669] Code: 7f a0 e8 51 0c fd ff 48 8b 43 50 f0 0f ba a8 30 2c 00 00 02 72 17 41 83 fd fb 74 11 44 89 ee 48 c7 c7 7d 11 7f a0 e8 38 f5 8d e0 <0f> ff 44 89 e9 ba 20 10 00 00 eb 4d 48 8b 4d b0 48 8b 75 88 4c
[71813.679669] ---[ end trace 83bd473fc5b4663b ]---
[71813.854764] BTRFS: error (device dm-0) in __btrfs_unlink_inode:4128: errno=-2 No such entry
[71813.886994] BTRFS: error (device dm-0) in btrfs_replay_log:2307: errno=-2 No such entry (Failed to recover log tree)
[71813.903357] BTRFS error (device dm-0): cleaner transaction attach returned -30
[71814.128078] BTRFS error (device dm-0): open_ctree failed
This happens because the log has inode reference items for both inode 258
(the first file we created) and inode 259 (the second file created), and
when processing the reference item for inode 258, we replace the
corresponding item in the subvolume tree (which has two names, "foo" and
"bar") witht he one in the log (which only has one name, "foo") without
removing the corresponding dir index keys from the parent directory.
Later, when processing the inode reference item for inode 259, which has
a name of "bar" associated to it, we notice that dir index entries exist
for that name and for a different inode, so we attempt to unlink that
name, which fails because the inode reference item for inode 258 no longer
has the name "bar" associated to it, making a call to btrfs_unlink_inode()
fail with a -ENOENT error.
Fix this by unlinking all the names in an inode reference item from a
subvolume tree that are not present in the inode reference item found in
the log tree, before overwriting it with the item from the log tree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If in the same transaction we rename a special file (fifo, character/block
device or symbolic link), create a hard link for it having its old name
then sync the log, we will end up with a log that can not be replayed and
at when attempting to replay it, an EEXIST error is returned and mounting
the filesystem fails. Example scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ mkfifo /mnt/testdir/foo
# Make sure everything done so far is durably persisted.
$ sync
# Create some unrelated file and fsync it, this is just to create a log
# tree. The file must be in the same directory as our special file.
$ touch /mnt/testdir/f1
$ xfs_io -c "fsync" /mnt/testdir/f1
# Rename our special file and then create a hard link with its old name.
$ mv /mnt/testdir/foo /mnt/testdir/bar
$ ln /mnt/testdir/bar /mnt/testdir/foo
# Create some other unrelated file and fsync it, this is just to persist
# the log tree which was modified by the previous rename and link
# operations. Alternatively we could have modified file f1 and fsync it.
$ touch /mnt/f2
$ xfs_io -c "fsync" /mnt/f2
<power failure>
$ mount /dev/sdc /mnt
mount: mount /dev/sdc on /mnt failed: File exists
This happens because when both the log tree and the subvolume's tree have
an entry in the directory "testdir" with the same name, that is, there
is one key (258 INODE_REF 257) in the subvolume tree and another one in
the log tree (where 258 is the inode number of our special file and 257
is the inode for directory "testdir"). Only the data of those two keys
differs, in the subvolume tree the index field for inode reference has
a value of 3 while the log tree it has a value of 5. Because the same key
exists in both trees, but have different index, the log replay fails with
an -EEXIST error when attempting to replay the inode reference from the
log tree.
Fix this by setting the last_unlink_trans field of the inode (our special
file) to the current transaction id when a hard link is created, as this
forces logging the parent directory inode, solving the conflict at log
replay time.
A new generic test case for fstests was also submitted.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing an incremental send of a filesystem with the no-holes feature
enabled, we end up issuing a write operation when using the no data mode
send flag, instead of issuing an update extent operation. Fix this by
issuing the update extent operation instead.
Trivial reproducer:
$ mkfs.btrfs -f -O no-holes /dev/sdc
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdc /mnt/sdc
$ mount /dev/sdd /mnt/sdd
$ xfs_io -f -c "pwrite -S 0xab 0 32K" /mnt/sdc/foobar
$ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap1
$ xfs_io -c "fpunch 8K 8K" /mnt/sdc/foobar
$ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap2
$ btrfs send /mnt/sdc/snap1 | btrfs receive /mnt/sdd
$ btrfs send --no-data -p /mnt/sdc/snap1 /mnt/sdc/snap2 \
| btrfs receive -vv /mnt/sdd
Before this change the output of the second receive command is:
receiving snapshot snap2 uuid=f6922049-8c22-e544-9ff9-fc6755918447...
utimes
write foobar, offset 8192, len 8192
utimes foobar
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=f6922049-8c22-e544-9ff9-...
After this change it is:
receiving snapshot snap2 uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64...
utimes
update_extent foobar: offset=8192, len=8192
utimes foobar
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64...
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info::super_copy is a byte copy of the on-disk structure and all
members must use the accessor macros/functions to obtain the right
value. This was missing in update_super_roots and in sysfs readers.
Moving between opposite endianness hosts will report bogus numbers in
sysfs, and mount may fail as the root will not be restored correctly. If
the filesystem is always used on a same endian host, this will not be a
problem.
Fix this by using the btrfs_set_super...() functions to set
fs_info::super_copy values, and for the sysfs, use the cached
fs_info::nodesize/sectorsize values.
CC: stable@vger.kernel.org
Fixes: df93589a17 ("btrfs: export more from FS_INFO to sysfs")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
In case of using DUP, we search for enough unallocated disk space on a
device to hold two stripes.
The devices_info[ndevs-1].max_avail that holds the amount of unallocated
space found is directly assigned to stripe_size, while it's actually
twice the stripe size.
Later on in the code, an unconditional division of stripe_size by
dev_stripes corrects the value, but in the meantime there's a check to
see if the stripe_size does not exceed max_chunk_size. Since during this
check stripe_size is twice the amount as intended, the check will reduce
the stripe_size to max_chunk_size if the actual correct to be used
stripe_size is more than half the amount of max_chunk_size.
The unconditional division later tries to correct stripe_size, but will
actually make sure we can't allocate more than half the max_chunk_size.
Fix this by moving the division by dev_stripes before the max chunk size
check, so it always contains the right value, instead of putting a duct
tape division in further on to get it fixed again.
Since in all other cases than DUP, dev_stripes is 1, this change only
affects DUP.
Other attempts in the past were made to fix this:
* 37db63a400 "Btrfs: fix max chunk size check in chunk allocator" tried
to fix the same problem, but still resulted in part of the code acting
on a wrongly doubled stripe_size value.
* 86db25785a "Btrfs: fix max chunk size on raid5/6" unintentionally
broke this fix again.
The real problem was already introduced with the rest of the code in
73c5de0051.
The user visible result however will be that the max chunk size for DUP
will suddenly double, while it's actually acting according to the limits
in the code again like it was 5 years ago.
Reported-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://www.spinics.net/lists/linux-btrfs/msg69752.html
Fixes: 73c5de0051 ("btrfs: quasi-round-robin for chunk allocation")
Fixes: 86db25785a ("Btrfs: fix max chunk size on raid5/6")
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Essentially duplicate the error handling from the above block which
handles the !PageUptodate(page) case and additionally clear
EXTENT_BOUNDARY.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
add_pending_csums was added as part of the new data=ordered
implementation in e6dcd2dc9c ("Btrfs: New data=ordered
implementation"). Even back then it called the btrfs_csum_file_blocks
which can fail but it never bothered handling the failure. In ENOMEM
situation this could lead to the filesystem failing to write the
checksums for a particular extent and not detect this. On read this
could lead to the filesystem erroring out due to crc mismatch. Fix it by
propagating failure from add_pending_csums and handling them.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The srcu_struct in btrfs_fs_info scales in size with NR_CPUS. On
kernels built with NR_CPUS=8192, this can result in kmalloc failures
that prevent mounting.
There is work in progress to try to resolve this for every user of
srcu_struct but using kvzalloc will work around the failures until
that is complete.
As an example with NR_CPUS=512 on x86_64: the overall size of
subvol_srcu is 3460 bytes, fs_info is 6496.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Fix some compiler warnings
- Fix block rservations for transactions created during log recovery
- Fix resource leaks when respecifying mount options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=A2Bo
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix some compiler warnings
- fix block reservations for transactions created during log recovery
- fix resource leaks when respecifying mount options
* tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix potential memory leak in mount option parsing
xfs: reserve blocks for refcount / rmap log item recovery
xfs: use memset to initialize xfs_scrub_agfl_info
When specifying string type mount option (e.g., logdev)
several times in a mount, current option parsing may
cause memory leak. Hence, call kfree for previous one
in this case.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When blkdev_open() races with device removal and creation it can happen
that unhashed bdev inode gets associated with newly created gendisk
like:
CPU0 CPU1
blkdev_open()
bdev = bd_acquire()
del_gendisk()
bdev_unhash_inode(bdev);
remove device
create new device with the same number
__blkdev_get()
disk = get_gendisk()
- gets reference to gendisk of the new device
Now another blkdev_open() will not find original 'bdev' as it got
unhashed, create a new one and associate it with the same 'disk' at
which point problems start as we have two independent page caches for
one device.
Fix the problem by verifying that the bdev inode didn't get unhashed
before we acquired gendisk reference. That way we make sure gendisk can
get associated only with visible bdev inodes.
Tested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When two blkdev_open() calls race with device removal and recreation,
__blkdev_get() can use looked up gendisk after it is freed:
CPU0 CPU1 CPU2
del_gendisk(disk);
bdev_unhash_inode(inode);
blkdev_open() blkdev_open()
bdev = bd_acquire(inode);
- creates and returns new inode
bdev = bd_acquire(inode);
- returns the same inode
__blkdev_get(devt) __blkdev_get(devt)
disk = get_gendisk(devt);
- got structure of device going away
<finish device removal>
<new device gets
created under the same
device number>
disk = get_gendisk(devt);
- got new device structure
if (!bdev->bd_openers) {
does the first open
}
if (!bdev->bd_openers)
- false
} else {
put_disk_and_module(disk)
- remember this was old device - this was last ref and disk is
now freed
}
disk_unblock_events(disk); -> oops
Fix the problem by making sure we drop reference to disk in
__blkdev_get() only after we are really done with it.
Reported-by: Hou Tao <houtao1@huawei.com>
Tested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a proper counterpart to get_disk_and_module() -
put_disk_and_module(). Currently it is opencoded in several places.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e864f39569 "fs: add RWF_DSYNC aand RWF_SYNC" added additional
way for direct IO to become synchronous and thus trigger fsync from the
IO completion handler. Then commit 9830f4be15 "fs: Use RWF_* flags for
AIO operations" allowed these flags to be set for AIO as well. However
that commit forgot to update the condition checking whether the IO
completion handling should be defered to a workqueue and thus AIO DIO
with RWF_[D]SYNC set will call fsync() from IRQ context resulting in
sleep in atomic.
Fix the problem by checking directly iocb flags (the same way as it is
done in dio_complete()) instead of checking all conditions that could
lead to IO being synchronous.
CC: Christoph Hellwig <hch@lst.de>
CC: Goldwyn Rodrigues <rgoldwyn@suse.com>
CC: stable@vger.kernel.org
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 9830f4be15
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
redirect_dir=nofollow should not follow a redirect. But in a specific
configuration it can still follow it. For example try this.
$ mkdir -p lower0 lower1/foo upper work merged
$ touch lower1/foo/lower-file.txt
$ setfattr -n "trusted.overlay.opaque" -v "y" lower1/foo
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=on none merged
$ cd merged
$ mv foo foo-renamed
$ umount merged
# mount again. This time with redirect_dir=nofollow
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=nofollow none merged
$ ls merged/foo-renamed/
# This lists lower-file.txt, while it should not have.
Basically, we are doing redirect check after we check for d.stop. And
if this is not last lower, and we find an opaque lower, d.stop will be
set.
ovl_lookup_single()
if (!d->last && ovl_is_opaquedir(this)) {
d->stop = d->opaque = true;
goto out;
}
To fix this, first check redirect is allowed. And after that check if
d.stop has been set or not.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: 438c84c2f0 ("ovl: don't follow redirects if redirect_dir=off")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When failing from ceph_fs_debugfs_init() in ceph_real_mount(),
there is lack of dput of root_dentry and it causes slab errors,
so change the calling order of ceph_fs_debugfs_init() and
open_root_dentry() and do some cleanups to avoid this issue.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When parsing string option, in order to avoid memory leak we need to
carefully free it first in case of specifying same option several times.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
fs/overlayfs/export.c:459:10-16: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 4b91c30a5a ("ovl: lookup connected ancestor of dir in inode cache")
CC: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Hightlights include:
- Fix a broken cast in nfs4_callback_recallany()
- Fix an Oops during NFSv4 migration events
- make struct nlmclnt_fl_close_lock_ops static
-----BEGIN PGP SIGNATURE-----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=l2jv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- fix a broken cast in nfs4_callback_recallany()
- fix an Oops during NFSv4 migration events
- make struct nlmclnt_fl_close_lock_ops static
* tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: make struct nlmclnt_fl_close_lock_ops static
nfs: system crashes after NFS4ERR_MOVED recovery
NFSv4: Fix broken cast in nfs4_callback_recallany()
