Unfortunately the previous patch to fix issues using the AMD ACP bridge
has the side effect of breaking the dmic in other cases and needs to be
reverted.
Removing the changes while we revisit the fix and find something better.
Apologies for the churn.
Suggested-by: Gabriel Craciunescu <unix.or.die@gmail.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210602171251.3243-1-markpearson@lenovo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20210524115506.35724-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow specifying Vddd regulator/supply to be enabled on I2C probing.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210528105101.508254-4-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add specific init function to poke needed registers & values for this IC
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210528105101.508254-2-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
More laptops identified where the AMD ACP bridge needs to be blocked
or the microphone will not work when connected to HDMI.
Use DMI to block the microphone PCM device for these platforms.
Suggested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210531145502.6079-1-markpearson@lenovo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason why the arizona core,irq and codec model specific
regmap bits cannot be build as a module. All they do is export symbols
which are used by the arizona-spi/i2c and arizona-codec modules, which
themselves can be built as module.
Change the Kconfig and Makefile arizona bits so that the arizona MFD-core
can be built as a module.
This is especially useful on x86 platforms with a WM5102 codec, this
allows the arizona MFD driver necessary for the WM5102 codec to be
enabled in generic distro-kernels without growing the base kernel-image
size.
Note this also adds an explicit "depends on MFD_ARIZONA" to all the
arizona codec Kconfig options. The codec drivers use functions from mfd
arizona-core. These new depends are necessary to disallow the codec
drivers being builtin when the arizona-core is build as a module,
otherwise we end up with missing symbol errors when building vmlinuz.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The return value of snd_soc_component_write() is stored but not
evaluated and this results in a warning when W=1 is set. Stop storing
the return value to be consistent with all other calls of
snd_soc_component_write() and to remove the warning.
Fixes: 0d6a04da9b ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The only use of the static and global snd_compress_ops structs is to
assign their address to the compress_ops field in the
snd_soc_component_driver struct which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Rikard Falkeborn (5):
ASoC: cs47125: Constify static struct snd_compress_ops
ASoC: wm5102: Constify static struct snd_compress_ops
ASoC: wm5110: Constify static struct snd_compress_ops
ASoC: qcom: q6asm-dai: Constify static struct snd_compress_ops
ASoC: SOF: Intel: Constify sof_probe_compressed_ops
sound/soc/codecs/cs47l24.c | 2 +-
sound/soc/codecs/wm5102.c | 2 +-
sound/soc/codecs/wm5110.c | 2 +-
sound/soc/qcom/qdsp6/q6asm-dai.c | 2 +-
sound/soc/sof/compress.c | 2 +-
sound/soc/sof/compress.h | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
--
2.31.1
Add PCI DID for Intel AlderLake-M.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210528184153.18251-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cl_dsp_init() dumps the ROM status if it fails after max
attempts before powering off the DSP. Remove the duplicate
log to print the ROM status and error in
hda_dsp_cl_boot_firmware(). These values are invalid anyway
as the DSP is already powered off.
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210528160551.10145-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the hda_dsp_dump() function to avoid duplicating
the ROM status and error.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210528160551.10145-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210528063033.19904-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of sof_probe_compressed_ops is to assign its address to
the compress_ops field in the snd_soc_component_driver struct, which is
a pointer to const. The assignment is done in sound/soc/sof/pcm.c. Make
it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-6-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210526231013.46530-5-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-4-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-3-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-2-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In general Renesas SoC's SSI/SRC are all enabled, but some SoC is not.
H2 E2
SRC0 <=
SRC1 SRC1
SRC2 SRC2
... ...
Renesas Sound driver is assuming that *all* modules are
enabled, and thus it is using *data array* to access each modules.
Because of it, we have been using "status = disabled" at DT,
and using *full size* array but avoiding disabled module.
ex)
rcar_sound,src {
src-0 {
=> status = "disabled";
};
src1: src-1 {
...
};
...
But R-Car D3 have many disabled modules (It has SSI3/SSI4, SRC5/SRC6),
and Renesas SoC maintainer don't want above style on DT.
ex)
rcar_sound,src {
=> src0: src-0 { status = "disabled"; };
=> src1: src-1 { status = "disabled"; };
=> src2: src-2 { status = "disabled"; };
=> src3: src-3 { status = "disabled"; };
=> src4: src-4 { status = "disabled"; };
src5: src-5 {
...
};
src6: src-6 {
...
};
};
rcar_sound,ssi {
=> ssi0: ssi-0 { status = "disabled"; };
=> ssi1: ssi-1 { status = "disabled"; };
=> ssi2: ssi-2 { status = "disabled"; };
ssi3: ssi-3 {
...
};
ssi4: ssi-4 {
...
};
};
To adjust it, it needs to care about related for_each_child_of_node()
loop on rsnd driver, and it is used from...
> grep -l for_each_child_of_node sound/soc/sh/rcar/*
sound/soc/sh/rcar/core.c
sound/soc/sh/rcar/ctu.c
sound/soc/sh/rcar/dma.c
sound/soc/sh/rcar/dvc.c
sound/soc/sh/rcar/mix.c
sound/soc/sh/rcar/src.c
sound/soc/sh/rcar/ssi.c
sound/soc/sh/rcar/ssiu.c
This patch adjust to this situation.
By this patch, we can avoid disabled modules on DT
rcar_sound,src {
src5: src-5 {
...
};
src6: src-6 {
...
};
};
rcar_sound,ssi {
ssi3: ssi-3 {
...
};
ssi4: ssi-4 {
...
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yyzk017.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch tidyup rsnd_parse_connect_xxx() style.
Nothing is changed, but is preparation for
next "ASoC: rsnd: adjust disabled module" patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877djfk01l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds "char *name" to rsnd_dma_request_channel().
It is not yet used so far, but is preparation for
next "ASoC: rsnd: adjust disabled module" patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s3vk01q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds "char *name" to rsnd_parse_connect_common().
It is not yet used so far, but is preparation for
next "ASoC: rsnd: adjust disabled module" patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6obk01v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent changes to use common code to power up/down DSP cores also
removed the reset of the core state at suspend. It turns out this is
still needed. When the firmware state is reset to
SOF_FW_BOOT_NOT_STARTED, also enabled_cores should be reset, and
existing DSP drivers depend on this.
BugLink: https://github.com/thesofproject/linux/issues/2824
Fixes: 42077f08b3 ("ASoC: SOF: update dsp core power status in common APIs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210528144330.2551-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Rockchip rk817 audio codec integrated into the
rk817 PMIC. This is based on the sources provided by Rockchip from
their BSP kernel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions,
most of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio.
-----BEGIN PGP SIGNATURE-----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=AIkz
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
./sound/soc/fsl/imx-rpmsg.c:140:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Message-Id: <1622113652-56646-1-git-send-email-zou_wei@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after
the DAPM widgets were added, and these powers were set by the JD settings
"RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function,
these powers were ignored to prevent them controlled by DAPM.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssiu_busif_err_irq_ctrl() has very similar duplicated code.
This patch merge and tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87sg28lwxw.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssiu_busif_err_status_clear() has very similar duplicated code.
This patch merge and tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87tumolwy3.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
BUSIF is SSIU feature, but its related code is
implemented at ssi.c today.
This patch moves it to ssiu.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87v974lwy9.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound uses many modules (SSI/SSIU/SRC/CTU/MIX/DVC/DMA),
and supports complex connections/path.
Thus each modules needs to save its status to correctly control it.
This status is updated when by .trigger, and .hw_params/.hw_free.
Renesas Sound is protecting modules by using lock when .trigger,
but it was not enough to protecting each modules "status" if it was
used from many paths.
1) .hw_params/.hw_free update status
2) another doesn't update status, but overwrites by same value
This patch do
1) protects .hw_params/.hw_free by lock
2) do nothing if no status update
Without this patch, protected mod->status (= .trigger) might be
overwrote by non protected mod->status (= .hw_params / .hw_free),
and in such case, CTU/MIX/DVC/SSIU/SSI which are used from
many paths might get damage.
If above issue happens, Renesas Sound will be hung (= silence)
and never be recoverd.
I could reproduce this issue by continue playing very short sound
with loop very long term (3-4 hours) through 2 inputs (= MIXer).
For updating rsnd_status_update(), this patch removes rsnd_dai_call()
debug message. Because we already have debugfs support, and is not
good match to new code.
Reported-by: Linh Phung T. Y <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87wnrklwyh.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd supports #define DEBUG, but it is not helpful
if issue happen after 4-5 hours.
This patch adds debugfs support for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87y2c0lwyn.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd is using dev_dbg() if irq error happen,
but it makes debug very difficult if some strange things happen.
This patch uses dev_info() for it, and rename the macro name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87zgwglwyv.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_dai_call() doesn't indicate error message,
thus it is very difficult to know the issue
when strange things happen.
This patch indicates error for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <871r9snbji.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ssi.c checks BUSIF when TDM mode, but it should be checked
everytime.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <8735u8nbjr.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSIU is not needed if SSI was PIO mode.
This patch ignores such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <874keonbkg.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
runtime might be NULL. Let's ignore such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <875yz4nbkt.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit d6956a7dde ("ASoC: rsnd: add null CLOCKIN support")
added null_clk, but it is using local static valuable.
It will be leaked if rsnd driver was removed.
This patch moves it to priv, and call unregister when removing.
Fixes: d6956a7dde ("ASoC: rsnd: add null CLOCKIN support")
Link: https://lore.kernel.org/r/87tumsoe2p.wl-kuninori.morimoto.gx@renesas.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <877djknbl5.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114239.7960-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Revise variable names and comments in
cs35l35 and cs35l36 amp drivers.
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210525194439.2232908-1-drhodes@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114017.18672-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114753.39544-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114503.26460-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sparse tool complains as follows:
sound/soc/fsl/imx-card.c:121:27: warning:
symbol 'ak4458_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:138:31: warning:
symbol 'ak4458_tdm_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:149:27: warning:
symbol 'ak4497_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:166:27: warning:
symbol 'ak5558_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:180:31: warning:
symbol 'ak5558_tdm_fs_mul' was not declared. Should it be static?
Those symbols are not used outside of imx-card.c, so marks
them static.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210524133553.2366502-1-weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20210524115131.46288-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Jack must be connected before reporting button events and
if the jack is disconnected button release must be reported
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-4-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Add support for 2.4MHz clock source
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-3-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Add support for 24bits, 2 channels, 48k Sample rate bit clock
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-2-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
The 16 Bits, 2 channels, 48K sample rate use case needs
to configure a safer pll_divout during the start of PLL
After 800us from the start of PLL the correct pll_divout
can be set
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-1-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCraeoACgkQJNaLcl1U
h9BuVgf+Ith7351Fz+Jd1Y8e0rdVXuR4qVrkwm6u93/PRmFsL8DDWfURiHPuXJ+W
7NgsyreQEDLJYom8qloda/Lva2+FB0BHHkzUVLiZ7mDdbYq9Dush0QLLnOSP4p3O
GeeFJeK4EkeGHHFBbFllJ6gVB9xiokEcghXz1a+PkNMkYuQpAswlvhHxlIfEk1Bv
p1DBcM3gfT+3kfGynyz9A2O01zSd34Eg7tQuMqObxwFwpWY9mzrlYaPLdLF7Vtgc
JyQVvjTMaUZtiN/zGUFyXxAboTGWIFlPJKvHLHCiKvivSveXamziasieUwDU/cBL
X5SuIh883CghMhp8Dtx39zpcuiwEZQ==
=sQPM
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.13
A collection of fixes that have come in since the merge window, mainly
device specific things. The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.
The power_state argument of snd_power_wait() is superfluous, receiving
only SNDRV_POWER_STATE_D0. Let's drop it in all callers for
simplicity.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210523090920.15345-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi Mark, Rob
These adds R-Car D3 support for rsnd driver.
[1/3] is tidyup patch for dt-bindings (not only for D3).
[2/3], [3/3] are for R-Car D3.
Kuninori Morimoto (3):
ASoC: dt-bindings: renesas: rsnd: tidyup properties
ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
ASoC: rsnd: add null CLOCKIN support
.../bindings/sound/renesas,rsnd.yaml | 10 ++++-
sound/soc/sh/rcar/adg.c | 37 ++++++++++++++++---
2 files changed, 41 insertions(+), 6 deletions(-)
--
2.25.1
NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers
used in many smartphones and tablets. Most of them are sold as "smart
amplifiers" with built-in "CoolFlux DSP" that is used for volume control,
plus a "sophisticated speaker-boost and protection algorithm".
Unfortunately, they are also almost entirely undocumented. The short
datasheets (e.g. [1] for TFA9897) describe the available features,
but do not provide any information about the registers or how to use
the "CoolFlux DSP".
The amplifiers are most often configured through proprietary userspace
libraries. There are also some (rather complex) kernel drivers (e.g. [2])
but even those rely on obscure firmware blobs for configuration (so-called
"containers"). They seem to contain different "profiles" with tuned speaker
settings, sample rates and volume steps (which would be better exposed
as separate ALSA mixers).
The format of the firmware files seems to have changed a lot over the time,
so it's not even possible to simply re-use the firmware originally provided
by the vendor.
Overall, it seems close to impossible to develop a proper mainline driver
for these amplifiers that could make proper use of the built-in DSP.
This commit implements a compromise: At least the TFA1 family of the
TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass*
the DSP using a special register sequence. The register sequence can be
found in similar variations in the kernel drivers from lots of vendors
e.g. in [3] and was probably mainly used for factory testing.
With the DSP bypassed, the amplifier acts mostly like a dumb standard
speaker amplifier, without (hardware) volume control. However, the setup
is much simpler and it works without any obscure firmware.
This driver implements the DSP bypass combined with chip-specific
initialization sequences adapted from [2]. Only TFA9895 is supported in
this initial commit. Except for the lack of volume control I can not hear
any difference with or without the DSP, it works just fine.
This driver allows the speaker to work on mainline Linux running on the
Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897].
TFA9897 support will be added in separate patch set later.
[1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78
[2]: https://source.codeaurora.org/external/mas/tfa98xx
[3]: 57b5050e34/sound/soc/codecs/tfa98xx.c (L1422-L1462)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 06e8f5c842 ("ASoC: rsnd: don't call clk_get_rate() under
atomic context") used saved clk_rate, thus for_each_rsnd_clk()
is no longer needed. This patch fixes it.
Fixes: 06e8f5c842 ("ASoC: rsnd: don't call clk_get_rate() under atomic context")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v978oe2u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check the return value of devm_kstrdup() in case of
Null-point-dereference.
Fixes: 45dd9943fc ("ASoC: core: remove artificial component and DAI name constraint")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20210524024941.159952-1-wangkefeng.wang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Brya is another ADL-P product.
AlderLake has support for Bluetooth audio offload capability.
Enable the BT-offload quirk for ADL-P Brya and the Intel RVP.
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521155632.3736393-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA support can only be compiled when SND_SOC_SOF_PCI is enabled which
depends on CONFIG_PCI.
This makes the IS_ENABLED(CONFIG_PCI) checks redundant in the code, they
will resolve to true all the time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throws the following warning:
sound/soc/sof/ops.h:247:17: error: returning void-valued expression
Remove the useless returns.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF core should use the IO functions via callbacks and not directly to
ensure that it remains platform independent.
Fixes: 83ee7ab162 ("ASoC: SOF: Intel: byt: Refactor fw ready / mem windows creation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print the register offset out to provide more useful information for the
register polling debugging.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the start of the function we already have the desc, no need to cast it
again from pci_id->driver_data to save it to sof_pdata.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can check for the desc->ops directly in the probe functions, the ops
is not used directly in the functions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver spits out a warning for me at boot:
sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2
but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac8230 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add machine driver for i.MX boards, which supports
AK4458/AK5558/AK4497/AK5552 DAC/ADC attached to
SAI interface currently, but these DAC/ADCs are not
only supported codecs. This machine driver is designed
to be a more common machine driver for i.MX platform,
it can support widely cpu dai interface and codec
dai interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
Link: https://lore.kernel.org/r/1621247488-21412-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original patch changed kcontrol_type to a pointer. In some goto
cases the pointer is assigned into a struct member as uninitialized and
this will cause a runtime error with UBSan even if it isn't a real bug.
So initialize the pointer to NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d29d41e28e ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210519100713.879958-1-jaska.uimonen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset adds Amlogic SM1 support on the TOACODEC driver, first by switching
to regmap fields for some bit fields to avoid code duplication, and then by adding
the corresponding bits & struct for the SM1 changed bits.
Changes since v2 at [2]:
- use raw values instead of defines in REG_FIELD() for g12a_toacodec_match_data
Changes since v1 at [1]:
- switch to regmap field
[1] https://lore.kernel.org/r/20210429170147.3615883-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20210505072607.3815442-1-narmstrong@baylibre.com
Neil Armstrong (2):
ASoC: meson: g12a-toacodec: use regmap fields to prepare SM1 support
ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC
sound/soc/meson/g12a-toacodec.c | 143 +++++++++++++++++++++++++++-----
1 file changed, 124 insertions(+), 19 deletions(-)
--
2.25.1
This adds support for the TOACODEC found in Amlogic SM1 SoCs.
The bits are shifted for more selection of clock sources, so this only
maps the same support for G12A to the SM1 bits.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-3-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch usage to regmap field for bits handled by the g12a_toacodec_mux_put_enum()
function to avoid uselesss code duplication when adding SM1 variant support.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-2-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BE hw_params op was recently added for SSP type DAIs.
But sending the DAI_CONFIG IPC during hw_params
is not supported with older firmware. So add an ABI check
to avoid sending the IPC if the firmware ABI is older than
3.18.
Fixes: e12be9fbfb ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs')
Tested-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210518174121.151601-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling clk_set_rate() failed.
Fixes: 0bf750f4cb ("ASoC: hisilicon: Add hi6210 i2s audio driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518044514.607010-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210514081100.16196-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the missing clk_disable_unprepare() before return
from rk3328_platform_probe() in the error handling case.
Fixes: c32759035a ("ASoC: rockchip: support ACODEC for rk3328")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518075847.1116983-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dapm widget has a single variable to describe its kcontrol's
type. As there can be many kcontrols in one widget it is inherently
presumed that the types are the same.
Lately there has been use cases where different types of kcontrols would
be needed for a single widget. Thus add pointer to dapm widget to hold
an array for different kcontrol types and modify the kcontrol creation
to operate in a loop based on individual kcontrol type.
Change control creation and deletion to use individual kcontrol types in
SOF driver. This is done in the same patch for not breaking bisect. SOF
driver is also currently the only one using the dapm widget
kcontrol_type.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210507070246.404446-1-jaska.uimonen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620791647-16024-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs43130_probe() does not do any valid error checking of things it
initializes, OR what it does, it does not unwind properly if there are
errors.
Fix this up by moving the sysfs files to an attribute group so the
driver core will correctly add/remove them all at once and handle errors
with them, and correctly check for creating a new workqueue and
unwinding if that fails.
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a2be42f18d.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original patch here is not correct, sysfs files that were created
are not unwound.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-57-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for return value from various snd_soc_dapm_* calls, as many of
them can return errors and this should be handled. Also, reintroduce
the allocation failure check for rt5645->eq_param as well. Make all
areas where return values are checked lead to the end of the function
in the case of an error. Finally, introduce a comment explaining how
resources here are actually eventually cleaned up by the caller.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-56-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 51dd97d1df.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Lots of things seem to be still allocated here and must be properly
cleaned up if an error happens here.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-55-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty_unregister_ldisc now returns 0 = success. No need to check the
return value. In fact, the users only warned if an error occured and
didn't do anything useful anyway -- the ldisc module was unloaded in any
case.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210505091928.22010-19-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make tty_unregister_ldisc symmetric to tty_register_ldisc by accepting
struct tty_ldisc_ops as a parameter instead of ldisc number. This avoids
checking of the ldisc number bounds in tty_unregister_ldisc.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210505091928.22010-17-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason to pass the ldisc number to tty_register_ldisc
separately. Just set it in the already defined tty_ldisc_ops in all the
ldiscs.
This simplifies tty_register_ldisc a bit too (no need to set the num
member there).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210505091928.22010-15-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Char pointer (cp) passed to tty_ldisc_ops::receive_buf{,2} is const.
There is no reason for flag pointer (fp) not to be too. So switch it in
the definition and all uses.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210505091928.22010-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit 312c004d36 ("[PATCH] driver core: replace "hotplug" by
"uevent"") already in the tree over a decade, update the name of
FW_ACTION defines to follow semantics, and reflect what the defines are
really meant for, i.e. whether or not generate user space event.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210425020024.28057-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HSBIAS_SENSE_EN configures HSBIAS output current sense through
the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce
the potential pop noise during the headset plug out slowly. But on some
platforms ESD voltage will affect it causing test to fail, especially
with CTIA headset type. For different hardware setups, a designer might
want to tweak default behavior.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511145220.125760-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 5f1b95d08d.
The warnings that commit 5f1b95d08d ("ASoC: q6dsp: q6afe: remove
unneeded dead-store initialization") was trying to fix were already
fixed in commit 12900bacb4 ("ASoC: qcom: q6afe: remove useless
assignments"). With both commits in the tree, port_id is uninitialized,
as pointed out by clang:
sound/soc/qcom/qdsp6/q6afe.c:1213:18: warning: variable 'port_id' is
uninitialized when used here [-Wuninitialized]
stop->port_id = port_id;
^~~~~~~
sound/soc/qcom/qdsp6/q6afe.c:1186:13: note: initialize the variable
'port_id' to silence this warning
int port_id;
^
= 0
1 warning generated.
Bring back the initialization so that everything works as intended.
Fixes: 5f1b95d08d ("ASoC: q6dsp: q6afe: remove unneeded dead-store initialization")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210511190306.2418917-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We want all wm_adsp clients to use the wm_adsp.h header as they
shouldn't need to include internal sub-headers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511171514.270219-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The callback structures and memory region type table can be marked as
const as they will not change during use.
Fix checkpatch warning against wm_adsp_find_region function by moving
const keyword to form the 'static const struct' pattern.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511171459.270169-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throwns the following warnings:
sound/soc/intel/boards/bxt_da7219_max98357a.c:843:19: error: too long
initializer-string for array of char(no space for nul char)
sound/soc/intel/boards/bxt_da7219_max98357a.c:844:19: error: too long
initializer-string for array of char(no space for nul char)
sound/soc/intel/boards/bxt_da7219_max98357a.c:845:19: error: too long
initializer-string for array of char(no space for nul char)
Fix by using the 'mx' acronyn for Maxim
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210511213707.32958-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform_id is too long and is flagged by a sparse warning:
sound/soc/intel/boards/sof_cs42l42.c:483:25: error: too long
initializer-string for array of char(no space for nul char)
fix by using the 'mx' acronym for Maxim
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210511213707.32958-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With more warnings than the default, Sparse throws the following
warning:
sound/soc/sof/intel/hda.c:1127:49: error: self-comparison always
evaluates to true
sound/soc/sof/intel/hda.c:1128:49: error: self-comparison always
evaluates to true
sound/soc/sof/intel/hda.c:1129:48: error: self-comparison always
evaluates to true
This looks like an obvious error, with a likely copy-pasted line
leading to the use of the wrong index in an inner loop. One of the
worst single-character bugs in a long time.
This problem was not detected in our tests since in practice SoundWire
platforms only have identical devices per link and the index mistake
did not change the results.
Fixes: 6f5d506d7ff1dq ('ASoC: SOF: Intel: SoundWire: refine ACPI match')
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210511213707.32958-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup a needlessly initialised variable and an unchecked return
value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 283160f141 ("ASoC: cs35l32: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 8cb9b00163 ("ASoC: cs35l34: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which uses
regmap_bulk_read but might also show up in the cache sync sometimes.
Add the missing flags to the regmap_config.
Fixes: 26495252fe ("ASoC: cs42l73: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device requires single register transactions, this will
definely cause problems with the new device ID parsing which
uses regmap_bulk_read but might also show up in the cache sync
sometimes. Add the missing flags to the regmap_config.
Fixes: 4fc81bc88a ("ASoC: cs53l30: Minor error paths fixups")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511175718.15416-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark, Guillaume
I'm so sorry to bother you again and again.
These are v2 of simple-card / audio-graph re-cleanup.
KernelCI had reported that below patches broke kontron-sl28-var3-ads2
sound card probing.
434392271a "ASoC: simple-card: add simple_link_init()"
59c35c44a9 "ASoC: simple-card: add simple_parse_node()"
Main issue I'm understanding is name create timing.
We want to create dailink->name via dlc->dai_name.
But in CPU case, this dai_name might be removed by asoc_simple_canonicalize_cpu()
if it CPU was single DAI.
Thus, we need to
A) get dlc->dai_name
B) create dailink->name via dlc->dai_name
C) call asoc_simple_canonicalize_cpu()
Above reverted patch did A->C->B.
My previous v1 patch did B->A->C.
I'm so sorry that I didn't deep test on v1.
I hope v2 patches has no issues on kontron-sl28-var3-ads2.
Link: https://lore.kernel.org/r/87cztzcq56.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h7k0i437.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/20210423175318.13990-1-broonie@kernel.org
Link: https://lore.kernel.org/r/3ca62063-41b4-c25b-a7bc-8a8160e7b684@collabora.com
Kuninori Morimoto (4):
ASoC: simple-card: add simple_parse_node()
ASoC: simple-card: add simple_link_init()
ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()
ASoC: audio-graph: tidyup graph_parse_node()
sound/soc/generic/audio-graph-card.c | 57 ++++-----
sound/soc/generic/simple-card.c | 168 +++++++++++++--------------
2 files changed, 112 insertions(+), 113 deletions(-)
--
2.25.1
cs42l42 does not support standard burst transfers so the use_single_read
and use_single_write flags must be set in the regmap config.
Because of this bug, the patch:
commit 0a0eb567e1 ("ASoC: cs42l42: Minor error paths fixups")
broke cs42l42 probe() because without the use_single_* flags it causes
regmap to issue a burst read.
However, the missing use_single_* could cause problems anyway because the
regmap cache can attempt burst transfers if these flags are not set.
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph is using cpus->dai_name / codecs->dai_name for
dailink->name.
In graph_parse_node(), xxx->dai_name is got by
snd_soc_get_dai_name(), but it might be removed soon by
asoc_simple_canonicalize_cpu().
The order should be
*1) call snd_soc_get_dai_name()
2) create dailink name
*3) call asoc_simple_canonicalize_cpu()
* are implemented in graph_parse_node().
This patch remove 3) from graph_parse_node()
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 8859f809c7 ("ASoC: audio-graph: add graph_parse_node()")
Fixes: e51237b8d3 ("ASoC: audio-graph: add graph_link_init()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87cztyawzr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup a needlessly initialised variable and an unchecked return
value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511101051.17726-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup a needlessly initialised variable and an unchecked return value.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511101051.17726-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog
mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically
apply these settings on Lenovo Miix 3-830 tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Original commit 434392271a ("ASoC: simple-card: add
simple_link_init()") are rejected, and this is remake version of it.
This patch adds simple_link_init() and share dai_link setting code.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 25c4a9b614 ("ASoC: simple-card: Fix breakage on kontron-sl28-var3-ads2")
Fixes: 434392271a ("ASoC: simple-card: add simple_link_init()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87fsyuax1g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Original commit 59c35c44a9 ("ASoC: simple-card: add
simple_parse_node()") was reverted, and this is remake version.
Parse dai/tdm/clk are common for both CPU/Codec node.
This patch creates simple_parse_node() for it and share the code.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 25c4a9b614 ("ASoC: simple-card: Fix breakage on kontron-sl28-var3-ads2")
Fixes: 59c35c44a9 ("ASoC: simple-card: add simple_parse_node()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87h7jaax2k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We recently added leading zeroes in dev_dbg() messages but forgot to
do the same for the peripheral device name. Adding leading zeroes
makes it easier to read manufacturer ID and part ID, e.g.:
sdw:0:025d:0700:00
sdw:0:025d:0711:00
sdw:1:025d:0700:00
sdw:1:025d:1308:00
sdw:2:025d:0700:00
sdw:2:025d:0701:00
sdw:3:025d:0700:00
sdw:3:025d:0715:00
The use of '01x' for link_id and unique_id is intentional to show the
value range in the code, it's understood it does not actually change
the format.
To avoid problems with git bisect, the same change needs to be applied
to the Intel SoundWire machine driver, otherwise the components can't
be found and the card registration fails.
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210511060137.29856-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pierre requested I have a look at some cppcheck warnings in the cs42l42
driver, since it is reassigning the ret variable without ever checking
the result. Looking a bit more broadly this happens in quite a few
legacy Cirrus parts, as they all use the same process to read the ID,
factor out a small helper so they can all share the same code. Whilst
in there fix up a couple of other trivial error path issues as well.
Thanks,
Charles
Charles Keepax (10):
ASoC: cirrus: Add helper function for reading the device ID
ASoC: cs35l32: Minor error paths fixups
ASoC: cs35l33: Minor error paths fixups
ASoC: cs35l34: Minor error paths fixups
ASoC: cs35l35: Minor error paths fixups
ASoC: cs35l35: Correct errata handling
ASoC: cs42l42: Minor error paths fixups
ASoC: cs42l73: Minor error paths fixups
ASoC: cs43130: Minor error paths fixups
ASoC: cs53l30: Minor error paths fixups
sound/soc/codecs/cirrus_legacy.h | 21 +++++++++++++++++++++
sound/soc/codecs/cs35l32.c | 34 ++++++++++++++++++----------------
sound/soc/codecs/cs35l33.c | 15 +++++++++------
sound/soc/codecs/cs35l34.c | 39 ++++++++++++++++++++++-----------------
sound/soc/codecs/cs35l35.c | 21 ++++++++++-----------
sound/soc/codecs/cs35l35.h | 1 +
sound/soc/codecs/cs42l42.c | 18 ++++++++----------
sound/soc/codecs/cs42l73.c | 30 +++++++++++++++++-------------
sound/soc/codecs/cs43130.c | 31 +++++++++++++++++++------------
sound/soc/codecs/cs53l30.c | 22 +++++++++++-----------
10 files changed, 136 insertions(+), 96 deletions(-)
create mode 100644 sound/soc/codecs/cirrus_legacy.h
--
2.11.0
We've had recurring randconfig issues with the two platforms relying
on ACPI and PCI. I think it's time to split the two and introduce a
common 'atom' module, so that dependencies are better handled.
I chose not to add a Fixes tag since the changes are rather invasive,
and the randconfig issues only happen in non-functional cases.
There should be no functional changes with this patchset, only code
moved and renamed.
Pierre-Louis Bossart (2):
ASoC: SOF: Intel: byt: prepare split between Baytrail and Merrifield
ASoC: SOF: Intel: move common ATOM stuff to module
sound/soc/sof/intel/Makefile | 5 +-
sound/soc/sof/intel/atom.c | 463 ++++++++++++++++++++
sound/soc/sof/intel/atom.h | 74 ++++
sound/soc/sof/intel/byt.c | 768 ++++------------------------------
sound/soc/sof/intel/pci-tng.c | 171 +++++++-
5 files changed, 783 insertions(+), 698 deletions(-)
create mode 100644 sound/soc/sof/intel/atom.c
create mode 100644 sound/soc/sof/intel/atom.h
--
2.25.1
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the check of errata_chk will always evaluate to false since
the values tested don't come under the mask used. A shift of the field
is missing, add this. Also there is an error in the values tested, they
don't match the comment and the value 0x3 is not a valid value for the
field in question. Update the value to match the comment.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct some unchecked re-allocations of ret whilst reading the device
ID and ensure the hardware state is returned to off on the error
paths.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many of the older Cirrus devices share very similar code for reading the
device ID, and frequently this code is generating cppcheck warnings such
as:
sound/soc/codecs/cs42l42.c:1886:6: style: Variable 'ret' is reassigned
a value before the old one has been used. [redundantAssignment]
ret = regmap_read(cs42l42->regmap, CS42L42_DEVID_CD, ®);
Add a small helper function that older Cirrus devices can use to read
the device ID, which should help correct these issues.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210510131357.17170-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the device_property APIs so that the code will work on devicetree
and ACPI systems.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210426155303.853236-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the internal jack creation by set_jack call, so users can map
buttons in their machine driver
Also only enable jack detection IRQ after set_jack call
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210426155303.853236-1-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let's implement a remove callback for this driver that's similar to the
shutdown hook, but also disables the regulators before they're put by
devm code.
Cc: Jairaj Arava <jairaj.arava@intel.com>
Cc: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210508075151.1626903-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We cancel the work queues, and reset the device on shutdown, but the irq
isn't disabled so the work queues could be queued again. Let's disable
the irq during shutdown so that we don't have to worry about this device
trying to do anything anymore. This fixes a problem seen where the i2c
bus is shutdown at reboot but this device irq still comes in and tries
to make another i2c transaction when the bus doesn't work.
Cc: Jairaj Arava <jairaj.arava@intel.com>
Cc: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Fixes: 45a2702ce1 ("ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210508075151.1626903-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Static analysis reports this problem
lpass-wsa-macro.c:1732:6: warning: Array subscript is undefined
if (wsa->ec_hq[ec_tx]) {
^~~~~~~~~~~~~~~~~
The happens because 'ec_tx' is never initialized and there is
no default in switch statement that sets ec_tx. Add a default
case that returns an error before the array is accessed.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210430142117.3272772-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable d_len_code is set to zero, but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
sound/soc/codecs/rt286.c:728:2: warning: Value stored to 'd_len_code' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1620298735-31708-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
./sound/soc/fsl/fsl_xcvr.c:739:2-3: Unneeded semicolon
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210506022452.5762-1-wanjiabing@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The format in rpmsg is defained as unsigned char, there is warning
when convert snd_pcm_format_t to it.
sound/soc/fsl/imx-pcm-rpmsg.c:164:43: sparse: warning: incorrect type in assignment (different base types)
sound/soc/fsl/imx-pcm-rpmsg.c:164:43: sparse: expected unsigned char format
sound/soc/fsl/imx-pcm-rpmsg.c:164:43: sparse: got restricted snd_pcm_format_t [usertype]
sound/soc/fsl/imx-pcm-rpmsg.c:167:43: sparse: warning: incorrect type in assignment (different base types)
sound/soc/fsl/imx-pcm-rpmsg.c:167:43: sparse: expected unsigned char format
sound/soc/fsl/imx-pcm-rpmsg.c:167:43: sparse: got restricted snd_pcm_format_t [usertype]
Refine the unused RPMSG_DSD_U16_LE and RPMSG_DSD_U32_LE for these
case to fix this sparse warning.
Fixes: 3c00eceb2a ("ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1620268240-1005-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
./sound/soc/codecs/lpass-rx-macro.c:2631:2-3: Unneeded semicolon
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210506021005.4897-1-wanjiabing@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete unused define of JZ4740_I2S_BIT_CLK, because it is unused
in any files.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20210506131833.27420-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variables 'wait' and 'port_id' are being initialized, however the
values are never read and updated later on, hence the redundant
initializations can be removed.
Cleans up clang warnings:
sound/soc/qcom/qdsp6/q6afe.c:933:21: warning: Value stored to 'wait'
during its initialization is never read
sound/soc/qcom/qdsp6/q6afe.c:1186:6: warning: Value stored to 'port_id'
during its initialization is never read
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619345553-29781-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The statement of the "if (afe_priv->mtkaif_protocol == MTKAIF_PROTOCOL_2)"
branch is the same as the "else" branch. Delete it to simplify code.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210510083640.3368-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable pdm_ctrl and pdm_enable and pdm_dma_enable are set to '0x00',
but they are overwritten later on, so these are redundant assignments
that can be removed.
Clean up the following clang-analyzer warning:
sound/soc/amd/renoir/acp3x-pdm-dma.c:148:2: warning: Value stored to
'pdm_dma_enable' is never read [clang-analyzer-deadcode.DeadStores].
sound/soc/amd/renoir/acp3x-pdm-dma.c:147:2: warning: Value stored to
'pdm_enable' is never read [clang-analyzer-deadcode.DeadStores].
sound/soc/amd/renoir/acp3x-pdm-dma.c:80:2: warning: Value stored to
'pdm_ctrl' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1620298590-29749-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since i.MX8MM SPDIF interface is able to capture raw data.
Add support in SPDIF driver for this functionality.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1619425444-8666-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
assigned a value that is never used. [unreadVariable]
int written_num = 0;
^
sound/soc/fsl/imx-pcm-rpmsg.c:547:18: style: Variable 'written_num' is
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426214701.235106-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/mt6359.c:274:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6359.c:274:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426214701.235106-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning
sound/soc/codecs/mt6359-accdet.c:417:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = 0;
^
sound/soc/codecs/mt6359-accdet.c:464:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426214701.235106-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the machine driver by using the common code in maxim-common
module to support max98357a.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine driver is a generic machine driver for SOF with cs42l42
I2C codec. It currently supports Maxim MAX98357A speker amp on GLK
but is extensible for other apms and platforms.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move max98357a code to this common module so it could be shared
between multiple SOF machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AlderLake needs the flag SOF_RT715_DAI_ID_FIX if it is using the
rt715 DMIC.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Somehow with copy/paste and inertia we keep re-adding this field for
BE dailinks, when it's only required for hard-coded FE links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_maxim_common.o is linked twice, move to a dedicated module.
Also clean-up interfaces to use a consistent 'max_98373' prefix for
all symbols.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda-dsp-common.o is linked multiple times due to copy/paste and
inertia. Move to a dedicated module with a namespace.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When external RT714/715 devices are used for capture, we don't want
the PCH DMICs to be used.
Any information provided by the SOF platform driver or DMI quirks will
be overridden.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ADL customer boards are with below 2 configurations
Board 1: RT5682 on SSP0 and MAX98373 on SSP1
Board 2: RT5682 on SSP0 and MAX98357A on SSP2
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BT audio offload is internally configured with virtual GPIOs,
the port assignment is fixed on SSP2 for TGL/ADL platforms.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210505163705.305616-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Split between ACPI/PCI parts and use common module.
Since it's a split of existing code, the same dual-license is used for
the new atom.c and atom.h files.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210505170235.306797-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Atom devices are split in ACPI (Baytrail/Cherrytrail) and
PCI (Merrifield) cases. In preparation for a split between the two
parts and the use of a common module, rename functions with the atom_
prefix when appropriate and remove explicit BYT_ prefix for common
definitions.
This patch should not change any functionality.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210505170235.306797-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210508031512.53783-1-cuibixuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function number should be FUNC_NUM_MIC_ARRAY(0x2) for the feature unit 0x1E.
Fixes: ca5118c0c0 ('ASoC: rt711-sdca: change capture switch controls')
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210504100424.8760-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No surprises in this development cycle, and most of works are about
the fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced;
used by HD-audio for now, more adaption will follow later.
The former "Mic Mute-LED Mode" mixer control has been replaced with
the corresponding sysfs now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements;
this will allow more controls in the normal usage pattern while
avoiding the possible memory exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates
Note that this PR includes a couple of changes in reset and SPI
drivers, too, and some merge conflicts might happen.
-----BEGIN PGP SIGNATURE-----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=YT3U
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"No surprises in this development cycle, and most of work is about the
fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced. It is used by HD-audio
for now, more adaption will follow later. The former "Mic Mute-LED
Mode" mixer control has been replaced with the corresponding sysfs
now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements; this will allow more controls in
the normal usage pattern while avoiding the possible memory
exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates"
* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
ALSA: hda/realtek: Re-order ALC662 quirk table entries
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: usb-audio: Remove redundant assignment to len
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
ALSA: virtio: fix kernel-doc
ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
...
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
- New Drivers
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
- New Device Support
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
- Removed Device Support
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
- New Functionality
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
- New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
netronix,ntxec, actions,atc260x,
ricoh,rn5t618, qcom-pm8xxx
- Fix-ups
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci,
atc260x-i2c, intel_quark_i2c_gpio
- Bug Fixes
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers
-----BEGIN PGP SIGNATURE-----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=IJSL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
There is problem with clk_hw_get_hw(). Using it pins the clock provider to
itself, making it impossible to remove the related module.
Revert the two commits using this function until this gets sorted out.
Jerome Brunet (2):
ASoC: stm32: do not request a new clock consummer reference
ASoC: da7219: do not request a new clock consummer reference
sound/soc/codecs/da7219.c | 5 +----
sound/soc/stm/stm32_sai_sub.c | 5 +----
2 files changed, 2 insertions(+), 8 deletions(-)
--
2.31.1
Below phython script throwing pcm_read() error.
import subprocess
p = subprocess.Popen(["aplay -t raw -D plughw:1,0 /dev/zero"], shell=True)
subprocess.call(["arecord -Dhw:1,0 --dump-hw-params"], shell=True)
subprocess.call(["arecord -Dhw:1,0 -fdat -d1 /dev/null"], shell=True)
p.kill()
Handling ACP global external interrupt enable register
causing this issue.
This register got updated wrongly when there is active
stream causing interrupts disabled for active stream.
Refactored code to handle enabling and disabling external interrupts.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1619555017-29858-1-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 12f8127fe9.
There is problem with clk_hw_get_hw(). Using it pins the clock provider to
itself, making it impossible to remove the module.
Revert commit 12f8127fe9 ("ASoC: da7219: properly get clk from the
provider") until this gets sorted out.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210428122632.46244-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 65d1cce726.
There is problem with clk_hw_get_hw(). Using it pins the clock provider to
itself, making it impossible to remove the module.
Revert commit 65d1cce726 ("ASoC: stm32: properly get clk from the
provider") until this gets sorted out.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210428122632.46244-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If
anyone shows up with this hardware, it is trivial to restore
these but we really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios
setting corner cases that loads of drivers got wrong as well
as removing unneeded code due to tty core changes from long
ago that were never propagated out to the drivers
- loads of platform-specific serial port driver updates and
fixes
- coding style cleanups and other small fixes and updates all
over the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa3NQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMXgCfX3FZgKveI4l94ChXSy4OyKwycHUAn00BzrMC
/7BwA1FnjQnC4zSzuHnm
=bAas
-----END PGP SIGNATURE-----
Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If anyone
shows up with this hardware, it is trivial to restore these but we
really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios setting
corner cases that loads of drivers got wrong as well as removing
unneeded code due to tty core changes from long ago that were never
propagated out to the drivers
- loads of platform-specific serial port driver updates and fixes
- coding style cleanups and other small fixes and updates all over
the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
serial: extend compile-test coverage
serial: stm32: add FIFO threshold configuration
dt-bindings: serial: 8250: update TX FIFO trigger level
dt-bindings: serial: stm32: override FIFO threshold properties
dt-bindings: serial: add RX and TX FIFO properties
serial: xilinx_uartps: drop low-latency workaround
serial: vt8500: drop low-latency workaround
serial: timbuart: drop low-latency workaround
serial: sunsu: drop low-latency workaround
serial: sifive: drop low-latency workaround
serial: txx9: drop low-latency workaround
serial: sa1100: drop low-latency workaround
serial: rp2: drop low-latency workaround
serial: rda: drop low-latency workaround
serial: owl: drop low-latency workaround
serial: msm_serial: drop low-latency workaround
serial: mpc52xx_uart: drop low-latency workaround
serial: meson: drop low-latency workaround
serial: mcf: drop low-latency workaround
serial: lpc32xx_hs: drop low-latency workaround
...
A KernelCI bisection identified 59c35c44a9 "ASoC: simple-card: add
simple_parse_node()" as causing simple-card to fail to instantiate on
kontron-sl28-var3-ads2 systems. Since the merge window is expected to
open over the weekend drop that commit and subsequent ones which depend
on it for now in case other systems are affected too.
The boot log showed the error as:
<4>[ 9.948821] sysfs: cannot create duplicate filename '/devices/platform/sound/(null)-wm8904-hifi'
(backtrace)
<3>[ 10.191982] kobject_add_internal failed for (null)-wm8904-hifi with -EEXIST, don't try to register things with the same name in the same directory.
The dropped commits are:
73371bacf0 "ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()"
434392271a "ASoC: simple-card: add simple_link_init()"
59c35c44a9 "ASoC: simple-card: add simple_parse_node()"
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the return value when the volume settings were changed.
The userspace application might monitor the kcontrols to check which control changed.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAPM event and mixer control could mute/unmute the capture directly.
That will be confused that capture still works if the user settings is unmute before the capture.
Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210422103220.21987-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the clk embedded in the clk_hw (which is meant to go
away), a clock provider which need to interact with its own clock should
request clk reference through the clock provider API.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the clk embedded in the clk_hw (which is meant to go
away), a clock provider which need to interact with its own clock should
request clk reference through the clock provider API.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210421120512.413057-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A reorganization of the driver source led to two of them causing
a compile time warning in some configurations:
tegra/tegra20_spdif.c:36:12: error: 'tegra20_spdif_runtime_resume' defined but not used [-Werror=unused-function]
36 | static int tegra20_spdif_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra20_spdif.c:27:12: error: 'tegra20_spdif_runtime_suspend' defined but not used [-Werror=unused-function]
27 | static int tegra20_spdif_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:64:12: error: 'tegra30_ahub_runtime_resume' defined but not used [-Werror=unused-function]
64 | static int tegra30_ahub_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:43:12: error: 'tegra30_ahub_runtime_suspend' defined but not used [-Werror=unused-function]
43 | static int tegra30_ahub_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: b5571449e6 ("ASoC: tegra30: ahub: Remove handing of disabled runtime PM")
Fixes: c53b396f0d ("ASoC: tegra20: spdif: Remove handing of disabled runtime PM")
Fixes: 80ec4a4cb3 ("ASoC: tegra20: i2s: Remove handing of disabled runtime PM")
Fixes: b5f6f781fc ("ASoC: tegra30: i2s: Remove handing of disabled runtime PM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210422133418.1757893-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Configuring number of channels per LRCLK frame by using e.g.
snd_soc_dai_set_tdm_slot before configuring DAI format was being
overwritten by the latter due to a regmap_write which would write over
the whole register.
Signed-off-by: Niklas Carlsson <niklasc@axis.com>
Link: https://lore.kernel.org/r/20210422130226.15201-1-Niklas.Carlsson@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse dai/tdm/clk are common for both CPU/Codec node.
This patch creates simple_parse_node() for it and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czuoi41f.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse mclk_fs/dai/tdm/clk are common for both CPU/Codec node.
This patch creates graph_parse_node() for it and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fszki426.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Random noise could be heard when playing audio to the HDMI output.
This is due to the IEC conversion is invoked in the external loop.
As a result, this additional loop takes up a lot of the processing
cycle.
hdmi_reformat_iec958() process the conversion using an internal loop,
it is safe to move it out from the external loop to avoid unnecessary
processing cycle been spent. Furthermore, ALSA IEC958 plugin works in
32bit format only.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210421005546.7534-1-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These patches cleanups audio-graph.
This is part of prepare for new audio-graph-card2.
Kuninori Morimoto (6):
ASoC: audio-graph: move audio_graph_card_probe() to simple-card-utils.c
ASoC: audio-graph: move audio_graph_remove() to simple-card-utils.c
ASoC: audio-graph: check ports if exists
ASoC: audio-graph: remove "audio-graph-card," preix support
ASoC: audio-graph: remove unused "node" from graph_parse_mclk_fs()
ASoC: audio-graph: remove Platform support
include/sound/graph_card.h | 4 --
include/sound/simple_card_utils.h | 3 ++
sound/soc/generic/audio-graph-card.c | 52 ++++--------------------
sound/soc/generic/simple-card-utils.c | 25 ++++++++++++
sound/soc/generic/simple-card.c | 7 ----
sound/soc/tegra/tegra_audio_graph_card.c | 4 +-
6 files changed, 38 insertions(+), 57 deletions(-)
--
2.25.1
Thank you for your help !!
Best regards
---
Kuninori Morimoto
Enable Daisy Chain if in TDM mode and the number of played
channels is bigger than the maximum supported number of channels.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1618915453-29445-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform was one of mandatory component on ASoC before,
and audio-graph-card was assuming that CPU and Platform were
same driver.
But it is no longer mandatory on ASoC.
Current ASoC will just ignore if Platform and CPU were same
or doplicated component.
Of course ASoC is supporting Platform, but current
audio-graph-card doesn't support detecting it from DT.
This means current audio-graph-card operation for Platform so far
is 100% useless. This patch removes it.
We can respawn it when we need it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sg3n3ubg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No upstream code is using "audio-graph-card," preix,
and Yaml base Document doesn't indicate it.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v98j3ubp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"endpoint" and "port" are always exists, but there is no guarantee
for "ports". This patch checks "ports" if exists, otherwise,
it might set un-expected settings.
This patch also do align to 100 char in 1 line.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnsz3ubu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 can reuse audio_graph_remove() / asoc_simple_remove().
This patch moves it to simple-card-utils.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2df3uby.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 can reuse audio_graph_card_probe().
This patch moves it to simple-card-utils.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgxv3uc4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct link_info can grow fairly large and may cause the stack frame
size to be exceeded when allocated on the stack. Some architectures
such as 32-bit ARM, RISC-V or PowerPC have small stack frames where
this causes a compiler warning, so allocate these structures on the
heap instead of the stack.
Fixes: 343e55e718 ("ASoC: simple-card-utils: Increase maximum number of links to 128")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20210419164117.1422242-1-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last two patches in this series fix a longstanding issue that prevented
the ALC3263 codec from using a headset mic. This codec can be found on Dell
systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343.
In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use
legacy HD Audio just to avoid this issue:
https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/
This may allow that ACPI quirk to be removed. Either way, the other systems
mentioned above do not support this quirk and already use the ASoC driver,
so this fix is necessary for headset mic support on those systems.
Note: there is likely other handling for this codec that only exists in the
HDA driver, but which also belongs in the ASoC driver. Commit 394c97f824
("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that
does not seem to be resolved in the ASoC driver, to give an example.
Other patches in this series are not specific to the ALC3263. These patches
set the correct combo jack configuration when headphones are inserted, and
fix a misaligned value set in the DMIC2 Configuration Default register.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
David Ward (5):
ASoC: rt286: Fix upper byte in DMIC2 configuration
ASoC: rt286: Configure combo jack for headphones
ASoC: rt298: Configure combo jack for headphones
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
ASoC: rt286: Generalize support for ALC3263 codec
sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++-------------
sound/soc/codecs/rt298.c | 9 +++++++--
2 files changed, 28 insertions(+), 15 deletions(-)
--
2.31.1
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
During jack detection, the combo jack is configured for a CTIA headset, and
then for an OMTP headset, while sensing the mic connection. If a mic is not
found in either case, the combo jack should be re-configured for headphones
only. This is consistent with the HDA driver behavior.
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-4-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
During jack detection, the combo jack is configured for a CTIA headset, and
then for an OMTP headset, while sensing the mic connection. If a mic is not
found in either case, the combo jack should be re-configured for headphones
only. This is consistent with the HDA driver behavior.
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-3-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
The ALSA control readback functionality only works for non-volatile
controls, i.e. control values that does not change on their own without
driver interaction.
This doesn't work for readbacks since the DSP firmware updates the
control value. Disable the cache mechanism in the driver if the control
name matches the prefix used for readbacks to ensure that the control
value is valid.
Signed-off-by: Niklas Carlsson <niklasc@axis.com>
Link: https://lore.kernel.org/r/20210419144901.9441-1-Niklas.Carlsson@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last two patches in this series fix a longstanding issue that prevented
the ALC3263 codec from using a headset mic. This codec can be found on Dell
systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343.
In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use
legacy HD Audio just to avoid this issue:
https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/
This may allow that ACPI quirk to be removed. Either way, the other systems
mentioned above do not support this quirk and already use the ASoC driver,
so this fix is necessary for headset mic support on those systems.
Note: there is likely other handling for this codec that only exists in the
HDA driver, but which also belongs in the ASoC driver. Commit 394c97f824
("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that
does not seem to be resolved in the ASoC driver, to give an example.
Other patches in this series are not specific to the ALC3263. These patches
set the correct combo jack configuration when headphones are inserted, and
fix a misaligned value set in the DMIC2 Configuration Default register.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
David Ward (5):
ASoC: rt286: Fix upper byte in DMIC2 configuration
ASoC: rt286: Configure combo jack for headphones
ASoC: rt298: Configure combo jack for headphones
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
ASoC: rt286: Generalize support for ALC3263 codec
sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++-------------
sound/soc/codecs/rt298.c | 9 +++++++--
2 files changed, 28 insertions(+), 15 deletions(-)
--
2.31.1
base-commit: a38fd87484
This HDA verb sets the upper byte of the Configuration Default register, so
only an 8-bit value should be used. For the rt298, the same fix was applied
in commit f8f2dc4a71 ("ASoC: rt298: fix wrong setting of gpio2_en").
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-2-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5682.c:2404:42: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/lpass-rx-macro.c:1626:9: warning: Identical condition
and return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/lpass-rx-macro.c:1623:6: note: If condition 'ret' is
true, the function will return/exit
if (ret)
^
sound/soc/codecs/lpass-rx-macro.c:1626:9: note: Returning identical
expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-core.c:2784:6: style: Condition '!num_routes' is always
false [knownConditionTrueFalse]
if (!num_routes) {
^
sound/soc/soc-core.c:2777:17: note: Assuming that condition
'num_routes<0' is not redundant
if (num_routes < 0 || num_routes & 1) {
^
sound/soc/soc-core.c:2783:2: note: Compound assignment '/=', assigned
value is 0
num_routes /= 2;
^
sound/soc/soc-core.c:2784:6: note: Condition '!num_routes' is always
false
if (!num_routes) {
^
The documentation for of_property_count_string reads
"
* Returns the number of strings on
* success, -EINVAL if the property does not exist, -ENODATA if property
* does not have a value, and -EILSEQ if the string is not null-terminated
* within the length of the property data.
"
Since the case for num_routes == 0 is not possible, let's remove this
test.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-core.c:2237:13: warning: %x in format string (no. 1)
requires 'unsigned int *' but the argument type is 'signed
int *'. [invalidScanfArgType_int]
} else if (sscanf(name, "%x-%x", &id1, &id2) == 2) {
^
sound/soc/soc-core.c:2237:13: warning: %x in format string (no. 2)
requires 'unsigned int *' but the argument type is 'signed
int *'. [invalidScanfArgType_int]
} else if (sscanf(name, "%x-%x", &id1, &id2) == 2) {
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
value that is never used. [unreadVariable]
acpi_status status = AE_OK;
^
sound/soc/soc-acpi.c:37:21: style: Variable 'status' is assigned a
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add main capture switch and main capture volume control.
Main capture control has its own channel value respectivelly.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/dfd43a8db04e4d52a889d6f5c1262173@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Tegra186 and later, the number of links can go up to 72, so bump the
maximum number of links to the next power of two (128).
Fixes: f2138aed23 ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210416071147.2149109-2-thierry.reding@gmail.com
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAI counting code doesn't propagate errors when the number of
maximum links is exceeded, which causes subsequent initialization code
to continue to run and that eventually leads to memory corruption with
the code trying to access memory that is out of bounds.
Fix this by propagating errors when the maximum number of links is
reached, which ensures that the driver fails to load and prevents the
memory corruption.
Fixes: f2138aed23 ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210416071147.2149109-1-thierry.reding@gmail.com
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_params_symmetry() checks CPU / Codec symmetry.
Unfortunately there was bug on it (= A) which didn't check Codec.
But is back by (B).
A: v5.7: commit c840f7698d ("ASoC: soc-pcm: Merge for_each_rtd_cpu/codec_dais()")
B: v5.12: commit 3a90672111 ("ASoC: soc-pcm: cleanup soc_pcm_params_symmetry()")
In total,
old - v5.6 (= Generation-1):
symmetric_rate : DAI_Link / CPU / Codec
symmetric_channels : DAI_Link / CPU / Codec
symmetric_sample_bits : DAI_Link / CPU / Codec
v5.7 - v5.11 (= Generation-2): (= because of bug by (A))
symmetric_rate : DAI_Link / CPU
symmetric_channels : DAI_Link / CPU / Codec
symmetric_sample_bits : DAI_Link / CPU / Codec
v5.12 - (= Generation-3): (= back by (B))
symmetric_rate : DAI_Link / CPU / Codec
symmetric_channels : DAI_Link / CPU / Codec
symmetric_sample_bits : DAI_Link / CPU / Codec
OTOH, we can use DPCM which is configured by FE / BE.
Both FE / BE uses dummy-DAI.
FE: CPU <-> dummy-DAI
BE: dummy-DAI <-> Codec
One note is that we can use .be_hw_params_fixup in DPCM case.
This means BE settings might be fixuped/updated by FE.
This feature is used for example on MIXer case.
It can be happen not only for rate, but for channels/sample_bits too.
Because of these reasons, below issue happen on
Generation-1 / Generation-3, if...
1) Sound Card used DPCM
2) It exchanges rate to 48kHz by using .be_hw_params_fixup()
3) Codec had symmetric_rate = 1
I didn't confirm, but maybe same things happen
if it exchanged channels/sample_bits at Generation-1/2/3 too.
# aplay 44100.wav
# aplay 44100.wav
=> [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000
[kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22
[kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22
aplay: set_params:1407: Unable to install hw params:
ACCESS: RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 32
CHANNELS: 2
RATE: 44100
PERIOD_TIME: (23219 23220)
PERIOD_SIZE: 1024
PERIOD_BYTES: 4096
PERIODS: 4
BUFFER_TIME: (92879 92880)
BUFFER_SIZE: 4096
BUFFER_BYTES: 16384
TICK_TIME: 0
soc_pcm_params_symmetry() checks by below
if (symmetry)
for_each_rtd_cpu_dais(rtd, i, cpu_dai)
if (cpu_dai->xxx && cpu_dai->xxx != d.xxx) {
dev_err(rtd->dev, "...");
return -EINVAL;
}
Because of above reason 3) (= Codec had symmetric_rate = 1)
BE can't ignore "if (symmetric)".
At 1st aplay, soc_pcm_params_symmetry() ignores it,
because dummy-DAI->rate is 0.
After this check, each DAI sets/keep settings.
In above sample case, BE gets 48000 and FE gets 44100,
and it happen BE -> FE order.
Because DPCM is sharing *same* dummy-DAI,
dummy-DAI sets as 48000 by BE, and is overwrote by 44100 by FE.
This settings never be cleaned (= a) after 1st aplay,
because dummy-DAI is used from FE/BE, never be last user (b).
static int soc_pcm_hw_clean(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
(b) if (snd_soc_dai_active(dai) == 1)
(a) soc_pcm_set_dai_params(dai, NULL);
...
}
...
}
At 2nd aplay, BE gets 48000 but dummy-DAI is keeping 44100,
soc_pcm_params_symmetry() checks will fail.
To solve this issue, this patch ignores dummy-DAI
at soc_pcm_params_symmetry()
Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2djxa2n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It indicates unmatched symmetry value, but not indicates on which DAI.
This patch indicates it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rbbyono.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
__soc_pcm_params_symmetry() macro is using "name" as parameter
which will be exchanged to rate/channles/sample_bit, like below
dai->name => dai->rate
dai->name => dai->channels
dai->name => dai->sample_bit
But, dai itself has "name". This means
1) It is very confusable naming
2) It can't use dai->name
This patch use "xxx" instead of "name"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735vryoob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A DAI link has 3 components:
* CPU
* platform
* codec(s)
A component is specified via:
* name
* of_node
* dai_name
In order to avoid confusion when building a sound card we disallow
matching by both name and of_node (1).
soc_check_tplg_fes allows overriding certain BE links by overriding
BE link name. This doesn't work well if BE link was specified via DT,
because we end up with a link with both name and of_node specified
which is conflicting with (1).
In order to fix this we need to:
* override of_node if component was specified via DT
* override name, otherwise.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20210414101212.65573-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for jack detection, rt711 DAI and DMIC
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add one configuration with no RT711.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add configurations ported over from TGL.
The topology names need to include link information given all the
hardware permutations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recently, the sof_pcm_dai_link_fixup() function was
updated to match SSP config with the PCM hw_params
and set the current_config for the DAI widget.
But the sof_restore_pipelines() function still chooses the
default config for the DAI widget upon resuming. Fix this
to use the last used config when setting up the DAI widget
during resume.
Fixes: c943a586f6 ("ASoC: SOF: match SSP config with pcm hw params")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415162107.130963-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kabylake_ssp_fixup function uses snd_soc_dpcm to identify the
codecs DAIs. The HW parameters are changed based on the codec DAI of the
stream. The earlier approach to get snd_soc_dpcm was using container_of()
macro on snd_pcm_hw_params.
The structures have been modified over time and snd_soc_dpcm does not have
snd_pcm_hw_params as a reference but as a copy. This causes the current
driver to crash when used.
This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime
holds 2 dpcm instances (one for playback and one for capture). 2 codecs
on the SSP are dmic (capture) and speakers (playback). Based on the
stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime.
Tested for all use cases of the driver.
Based on similar fix in kbl_rt5663_rt5514_max98927.c
from Harsha Priya <harshapriya.n@intel.com> and
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415124347.475432-1-lma@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These patches adjusts to multi CPU/Codec on simple-card / audio-graph.
This is part of prepare for new audio-graph-card2.
Kuninori Morimoto (5):
ASoC: simple-card: remove unused variable from simple_parse_of()
ASoC: simple-card: use asoc_link_to_xxx() macro
ASoC: simple-card: use simple_props_to_xxx() macro
ASoC: audio-graph: use asoc_link_to_xxx() macro
ASoC: audio-graph: use simple_props_to_xxx() macro
sound/soc/generic/audio-graph-card.c | 43 +++++++++++++-----------
sound/soc/generic/simple-card.c | 50 +++++++++++++---------------
2 files changed, 47 insertions(+), 46 deletions(-)
--
2.25.1
We shouldn't use dai_props->cpus/codecs directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses simple_props_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0p5zs97.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_link->cpus/codecs/platforms directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses asoc_link_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lf9lzs9c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_props->cpus/codecs directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses simple_props_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtu1zs9i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
