Commit Graph

502 Commits

Author SHA1 Message Date
Christoph Hellwig
6e1db88d53 introduce __block_write_begin
Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated.  Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:32 -04:00
Christoph Hellwig
f4e420dc42 clean up write_begin usage for directories in pagecache
For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.

Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code.  The added benefit is that foofs_prepare_chunk has
a much saner calling convention.

Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:31 -04:00
Christoph Hellwig
eafdc7d190 sort out blockdev_direct_IO variants
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence.  This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway.  Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:29 -04:00
Christoph Hellwig
7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Ryusuke Konishi
89c0fd014d nilfs2: reject filesystem with unsupported block size
This inserts sanity check that refuses to mount a filesystem with
unsupported block size.

Previously, kernel code of nilfs was looking only limitation of
devices though mkfs.nilfs2 limits the range of block sizes; there was
no check that prevents rec_len overflow with larger block sizes.

With this change, block sizes larger than 64KB or smaller than 1KB
will get rejected explicitly by kernel.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-25 23:29:21 +09:00
Ryusuke Konishi
6cda9fa257 nilfs2: avoid rec_len overflow with 64KB block size
With 64KB blocksize, a directory entry can have size 64KB which does
not fit into 16 bits we have for entry length.  So this patch stores
0xffff instead and converts value when read from / written to disk.

Nilfs derives its directory implementation from ext2 filesystem, and
this draws upon the corresponding change on ext2.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-25 20:46:43 +09:00
Ryusuke Konishi
c28e69d933 nilfs2: simplify nilfs_get_page function
Implementation of nilfs_get_page() is a bit old as below:

 - A common read_mapping_page inline function is now available instead
   of its read_cache_page use.
 - wait_on_page_locked() use in the function is eliminable since
   read_cache_page function does the same thing through wait_on_page_read().
 - PageUptodate() check is eliminable for the same reason.

This renews nilfs_get_page() based on these points.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-24 17:36:29 +09:00
Ryusuke Konishi
c5ca48aabe nilfs2: reject incompatible filesystem
This forces nilfs to check compatibility of feature flags so as to
reject a filesystem with unknown features when it mounts or remounts
the filesystem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:16 +09:00
Ryusuke Konishi
03bdb5ac58 nilfs2: apply read-ahead for nilfs_btree_lookup_contig
This applies read-ahead to nilfs_btree_do_lookup and
nilfs_btree_lookup_contig functions and extends them to read ahead
siblings of level 1 btree nodes that hold data blocks.

At present, the read-ahead is not applied to most btree operations;
only get_block() callback function, which is used during read of
regular files or directories, receives the benefit.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:16 +09:00
Ryusuke Konishi
4e13e66bee nilfs2: introduce check flag to btree node buffer
nilfs_btree_get_block() now may return untested buffer due to
read-ahead.  This adds a new flag for buffer heads so that the btree
code can check whether the buffer is already verified or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi
464ece8863 nilfs2: add btree get block function with readahead option
This adds __nilfs_btree_get_block() function that can issue a series
of read-ahead requests for sibling btree nodes.

This read-ahead needs parent node block, so nilfs_btree_readahead_info
structure is added to pass the information that
__nilfs_btree_get_block() needs.

This also replaces the previous nilfs_btree_get_block() implementation
with a wrapper function of __nilfs_btree_get_block().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi
26dfdd8e29 nilfs2: add read ahead mode to nilfs_btnode_submit_block
This adds mode argument to nilfs_btnode_submit_block() function and
allows it to issue a read-ahead request.

An optional submit_ptr argument is also added to store the actual
block address for which bio is sent.  submit_ptr is used for a series
of read-ahead requests, and helps to decide if each requested block is
continous to the previous one on disk.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi
f8e6cc013b nilfs2: fix buffer head leak in nilfs_btnode_submit_block
nilfs_btnode_submit_block() refers to buffer head just before
returning from the function, but it releases the buffer head earlier
than that if nilfs_dat_translate() gets an error.

This has potential for oops in the erroneous case.  This fixes the
issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi
7c397a81fe nilfs2: eliminate inline keywords in btree implementation
This removes all inline uses from btree.c.  Gcc now agressively apply
inline expansion even for the functions declared without the keyword;
the inline use in btree.c looks excessive.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi
5ad2686e92 nilfs2: get maximum number of child nodes from bmap object
The patch "reduce repetitive calculation of max number of child nodes"
gathered up the calculation of maximum number of child nodes into
nilfs_btree_nchildren_per_block() function.  This makes the function
get resultant value from a private variable in bmap object instead of
calculating it for each call.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi
9b7b265c9a nilfs2: reduce repetitive calculation of max number of child nodes
The current btree implementation repeats the same calculation on the
maximum number of child nodes.  This is because a few low level
routines use the calculation for index addressing in a btree node
block.

This reduces the calculation by explicitly passing the maximum number
of child nodes (ncmax) through their argument.

This changes parameter passing of the following functions:

 - nilfs_btree_node_dptrs
 - nilfs_btree_node_get_ptr
 - nilfs_btree_node_set_ptr
 - nilfs_btree_node_init
 - nilfs_btree_node_move_left
 - nilfs_btree_node_move_right
 - nilfs_btree_node_insert
 - nilfs_btree_node_delete, and
 - nilfs_btree_get_node

The following functions are removed:

 - nilfs_btree_node_nchildren_min
 - nilfs_btree_node_nchildren_max

Most middle level btree operations are rewritten to pass a proper
ncmax value depending on whether each occurrence of node is "root" or
not.

A constant NILFS_BTREE_ROOT_NCHILDREN_MAX is used for the root node,
whereas nilfs_btree_nchildren_per_block() function is used for
non-root nodes.  If a node could be either root or a non-root node, an
output argument of nilfs_btree_get_node() is used to set up ncmax.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi
ea64ab87cd nilfs2: optimize calculation of min/max number of btree node children
nilfs_btree_node_nchildren_max() and nilfs_btree_node_nchildren_min()
functions switch return value depending on whether target node is the
root or a node block.  In most uses of these functions, however, the
node type is fixed, and moreover the same calculation is repeatedly
performed in loop.

This unfold these functions depending on context and move them outside
loops wherever possible.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi
364ec2d700 nilfs2: remove redundant pointer checks in bmap lookup functions
nilfs_bmap_lookup and its variants are supposed to take a valid
pointer argument to return a block address, thus pointer checks in
nilfs_btree_lookup and nilfs_direct_lookup are needless.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi
05d0e94b66 nilfs2: get rid of nilfs_bmap_union
This removes nilfs_bmap_union and finally unifies three structures and
the union in bmap/btree code into one.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi
dc935be2a0 nilfs2: unify bmap set_target_v operations
This unifies two similar functions nilfs_btree_set_target_v and
nilfs_direct_set_target_v into one, nilfs_bmap_set_target_v.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi
e7c274f808 nilfs2: get rid of nilfs_btree uses
This replaces all uses of nilfs_btree struct in implementation of
btree mapping with nilfs_bmap struct.

Name of local variable "btree" is kept not to bloat amount of change.
And, a part of local variables "bmap" is renamed to "btree" to uniform
naming rule.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi
10ff885ba6 nilfs2: get rid of nilfs_direct uses
This replaces all uses of nilfs_direct struct in implementation of
direct mapping with nilfs_bmap struct.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi
583ada4761 nilfs2: remove constant qualifier from argument of bmap propagate
The first argument of bops->bop_propagate operation takes a constant
qualifier, and causes compilation error when removed cast to pointer
of nilfs_btree structure type.  This fixes the issue to prepare for
succesive removal of nilfs_btree struct.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi
25b8d7ded0 nilfs2: get rid of private conversion macros on bmap key and pointer
Will remove nilfs_bmap_key_to_dkey(), nilfs_bmap_dkey_to_key(),
nilfs_bmap_ptr_to_dptr(), and nilfs_bmap_dptr_to_ptr() for simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi
1d5385b9f3 nilfs2: verify btree node after reading
This inserts sanity checks soon after read btree node from disk.  This
allows early detection of broken btree nodes, and helps to narrow down
problems due to file system corruption.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi
cfa913a507 nilfs2: add sanity check in nilfs_btree_add_dirty_buffer
According to the report titled "problem with nilfs_cleanerd" from
Łukasz Wójcicki, nilfs_btree_lookup_dirty_buffers or
nilfs_btree_add_dirty_buffer got memory violation during garbage
collection.

This could happen if a level field of given btree node buffer is
incorrect, which is a crucial internal bug.

This inserts a sanity check to figure out the problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:12 +09:00
Ryusuke Konishi
7c01745781 nilfs2: pass remount flag to parse_options
This adds is_remount argument to the parse_options() function that
obtains mount options from strings.

Previously, parse_options did not distinguish context whether it's
called for a new mount or remount, so the caller needed additional
verifications outside the function.

This allows parse_options to verify options and print messages
depending on the context.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:12 +09:00
Ryusuke Konishi
c6b4d57ddf nilfs2: use seq_puts to print mount options without argument
This replaces seq_printf() with seq_puts() in nilfs_show_options for
mount options which have no argument.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:12 +09:00
Ryusuke Konishi
802d317754 nilfs2: add nodiscard mount option
Nilfs has "discard" mount option which issues discard/TRIM commands to
underlying block device, but it lacks a complementary option and has
no way to disable the feature through remount.

This adds "nodiscard" option to resolve this imbalance.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:12 +09:00
Ryusuke Konishi
773bc4f3b6 nilfs2: add barrier mount option
Nilfs enables write barriers by default and has "nobarrier" mount
option to disable this feature.  But it lacks the complementary option
and has no way to re-enable the feature on remount.

This adds "barrier" option to resolve this imbalance.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:12 +09:00
Ryusuke Konishi
325020477a nilfs2: do not update log cursor for small change
Super blocks of nilfs are periodically overwritten in order to record
the recent log position.  This shortens recovery time after unclean
unmount, but the current implementation performs the update even for a
few blocks of change.  If the filesystem gets small changes slowly and
continually, super blocks may be updated excessively.

This moderates the issue by skipping update of log cursor if it does
not cross a segment boundary.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:11 +09:00
Ryusuke Konishi
6c12516083 nilfs2: implement fallback for super root search
Although nilfs redundantly uses two super blocks and each may point to
different position on log, the current version of nilfs does not try
fallback to the spare super block when it doesn't find any valid log
at the position that the primary super block points to.

This has been a cause of mount failures due to write order reversals
on barrier less block devices.

This inserts fallback code in error path of nilfs_search_super_root
routine to resolve the mount failure problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:11 +09:00
Ryusuke Konishi
2d72b99ecd nilfs2: add missing error code in comment of nilfs_search_super_root
nilfs_search_super_root can return -ENOMEM, but this error code is not
described in its kernel-doc comment.  This fixes the discrepancy.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:11 +09:00
Ryusuke Konishi
843d63baa5 nilfs2: separate setup of log cursor from init_nilfs
This separates a setup routine of log cursor from init_nilfs().  The
routine, nilfs_store_log_cursor, reads the last position of the log
containing a super root, and initializes relevant state on the nilfs
object.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:11 +09:00
Jiro SEKIBA
b2ac86e1a8 nilfs2: sync super blocks in turns
This will sync super blocks in turns instead of syncing duplicate
super blocks at the time.  This will help searching valid super root
when super block is written into disk before log is written, which is
happen when barrier-less block devices are unmounted uncleanly.  In
the situation, old super block likely points to valid log.

This patch introduces ns_sbwcount member to the nilfs object and adds
nilfs_sb_will_flip() function; ns_sbwcount counts how many times super
blocks write back to the disk.  And, nilfs_sb_will_flip() decides
whether flipping required or not based on the count of ns_sbwcount to
sync super blocks asymmetrically.

The following functions are also changed:

 - nilfs_prepare_super(): flips super blocks according to the
   argument.  The argument is calculated by nilfs_sb_will_flip()
   function.

 - nilfs_cleanup_super(): sets "clean" flag to both super blocks if
   they point to the same checkpoint.

To update both of super block information, caller of
nilfs_commit_super must set the information on both super blocks.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:11 +09:00
Jiro SEKIBA
d26493b6f0 nilfs2: introduce nilfs_prepare_super
This function checks validity of super block pointers.
If first super block is invalid, it will swap the super blocks.
The function should be called before any super block information updates.
Caller must obtain nilfs->ns_sem.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:10 +09:00
Ryusuke Konishi
60f46b7efc nilfs2: separate function that updates log position
This moves out section that updates information of the recent log
position stored in super blocks from nilfs_commit_super to a new
routine named nilfs_set_log_cursor.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:10 +09:00
Ryusuke Konishi
c8a11c8a14 nilfs2: add nilfs_set_error
This function marks error state and write it on super blocks.  This is
a preparation for making super block writeback alternately.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:10 +09:00
Ryusuke Konishi
7ecaa46cfe nilfs2: add nilfs_cleanup_super
This function write out filesystem state to super blocks in order to
share the same cleanup work.  This is a preparation for making super
block writeback alternately.

Cc: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:10 +09:00
Ryusuke Konishi
bde4e696e4 nilfs2: do not update mount time on rw->ro remount
Mount time field in super block is wrongly updated when nilfs remounts
the partition from read-write to read-only.  This fixes the issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:10 +09:00
Ryusuke Konishi
57a4bfc486 nilfs2: get rid of ns_free_segments_count
This counter is unused.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:09 +09:00
Ryusuke Konishi
4762077c7b nilfs2: get rid of macros for segment summary information
This removes macros to test segment summary flags and redefines a few
relevant macros with inline functions.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:09 +09:00
Ryusuke Konishi
85655484f8 nilfs2: do not use nilfs_segsum_info structure in recovery code
This will get rid of nilfs_segsum_info use from recovery functions for
simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:09 +09:00
Ryusuke Konishi
354fa8be28 nilfs2: divide load_segment_summary function
load_segment_summary function has two distinct roles: getting summary
header of a log, and verifying consistencies of the log.

This divide it into two corresponding functions, nilfs_read_log_header
and nilfs_validate_log to clarify the meaning.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:09 +09:00
Ryusuke Konishi
aee5ce2f57 nilfs2: rename nilfs_recover_logical_segments function
The function name of nilfs_recover_logical_segments makes no sense.
This changes the name into nilfs_salvage_orphan_logs to clarify the
role of the function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:09 +09:00
Ryusuke Konishi
8b94025c00 nilfs2: refactor recovery logic routines
Most functions in recovery code take an argument of a super block
instance or a nilfs_sb_info struct for convenience sake.

This replaces them aggressively with a nilfs object by applying
__bread and __breadahead against routines using sb_bread and
sb_breadahead.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:08 +09:00
Ryusuke Konishi
92c60ccaf3 nilfs2: add blocksize member to nilfs object
This stores blocksize in nilfs objects for the successive refactoring
of recovery logic.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:08 +09:00
Ryusuke Konishi
c29684d683 nilfs2: remove obsolete declarations of cache constructor and destructor
The commit 41c88bd7 ("nilfs2: cleanup multi
kmem_cache_{create,destroy} code") consolidated slab constructors and
destructors used in nilfs, but it left some declarations in header
files.

This gets rid of the obsolete declarations.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-31 20:50:29 +09:00
Ryusuke Konishi
84cb099985 nilfs2: fix style issue in nilfs_destroy_cachep
This gets rid of unwanted space chars in front of conditional
sentences of nilfs_destroy_cachep().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-31 20:50:29 +09:00
Christoph Hellwig
7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Linus Torvalds
e8bebe2f71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
  fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
  get rid of home-grown mutex in cris eeprom.c
  switch ecryptfs_write() to struct inode *, kill on-stack fake files
  switch ecryptfs_get_locked_page() to struct inode *
  simplify access to ecryptfs inodes in ->readpage() and friends
  AFS: Don't put struct file on the stack
  Ban ecryptfs over ecryptfs
  logfs: replace inode uid,gid,mode initialization with helper function
  ufs: replace inode uid,gid,mode initialization with helper function
  udf: replace inode uid,gid,mode init with helper
  ubifs: replace inode uid,gid,mode initialization with helper function
  sysv: replace inode uid,gid,mode initialization with helper function
  reiserfs: replace inode uid,gid,mode initialization with helper function
  ramfs: replace inode uid,gid,mode initialization with helper function
  omfs: replace inode uid,gid,mode initialization with helper function
  bfs: replace inode uid,gid,mode initialization with helper function
  ocfs2: replace inode uid,gid,mode initialization with helper function
  nilfs2: replace inode uid,gid,mode initialization with helper function
  minix: replace inode uid,gid,mode init with helper
  ext4: replace inode uid,gid,mode init with helper
  ...

Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
2010-05-21 19:37:45 -07:00
Dmitry Monakhov
73459dcc67 nilfs2: replace inode uid,gid,mode initialization with helper function
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:25 -04:00
Jens Axboe
ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Ryusuke Konishi
d240e06713 nilfs2: disallow remount of snapshot from/to a regular mount
Snapshots and regular ro/rw mounts are essentially-different within
the meaning whether the checkpoint is static or not and is marked with
a snapshot flag or not.

The current implemenation, however, allows to remount a snapshot to a
regular rw-mount if the checkpoint number equals the latest one.

This transition is actually impossible since changing a checkpoint to
a snapshot makes another checkpoint, thus the condition is never
satisfied.

This fixes the weird state of affairs, and specifically separates
snapshots and regular rw/ro-mounts.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:34 +09:00
Ryusuke Konishi
cdce214e39 nilfs2: use huge_encode_dev/huge_decode_dev
This replaces uses of new_encode_dev/new_decode_dev with their 64-bit
counterparts, huge_encode_dev/huge_decode_dev respectively.

This is just for clarification and has no impact on the disk format.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:34 +09:00
Ryusuke Konishi
b87ca91948 nilfs2: update comment on deactivate_super at nilfs_get_sb
deactivate_super was replaced with deactivate_locked_super, but the
comment of nilfs_get_sb remain unchanged.  This renews the comment.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:34 +09:00
Ryusuke Konishi
e2d1591a13 nilfs2: replace MS_VERBOSE with MS_SILENT
MS_VERBOSE is deprecated.  This replaces it with MS_SILENT in
reference to get_sb_bdev function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:34 +09:00
Ryusuke Konishi
4571b82cdc nilfs2: add missing initialization of s_mode
An fmode_t argument is passed to kill_block_super() through s_mode
member of the super_block structure.  This is used to release the
block device with the same mode, however, nilfs does not set s_mode
anywhere.

This modifies nilfs_get_sb function to properly initialize the s_mode
member.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:33 +09:00
Ryusuke Konishi
13e905592b nilfs2: fix misuse of open_bdev_exclusive/close_bdev_exclusive
The second argument of open_bdev_exclusive/close_bdev_exclusive takes
fmode_t flags instead of mount flags.  This fixes the misuse.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:33 +09:00
Ryusuke Konishi
25294d8c37 nilfs2: use checkpoint number instead of timestamp to select super block
Nilfs maintains two super blocks, and selects the new one on mount
time if they both have valid checksums and their timestamps differ.

However, this has potential for mis-selection since the system clock
may be rewinded and the resolution of the timestamps is not high.

Usually this doesn't become an issue because both super blocks are
updated at the same time when the file system is unmounted.  Even if
the file system wasn't unmounted cleanly, the roll-forward recovery
will find the proper log which stores the latest super root.  Thus,
the issue can appear only if update of one super block fails and the
clock happens to be rewinded.

This fixes the issue by using checkpoint numbers instead of timestamps
to pick the super block storing the location of the latest log.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:32 +09:00
Ryusuke Konishi
34cb9b5c97 nilfs2: add missing endian conversion on super block magic number
This adds missing endian conversions in comparision of the magic
number of super blocks.  It was coincidence that prior versions didn't
incur problems; the upper byte of the magic number happened to be
equal to the lower byte.  But, semantically it's wrong to depend on
this.

This won't change anything else nor suffer any compatibility issues.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:32 +09:00
Ryusuke Konishi
4e819509cb nilfs2: make nilfs_sc_*_ops static
This kills the following sparse warnings:

fs/nilfs2/segment.c:567:28: warning: symbol 'nilfs_sc_file_ops' was not declared. Should it be static?
fs/nilfs2/segment.c:617:28: warning: symbol 'nilfs_sc_dat_ops' was not declared. Should it be static?
fs/nilfs2/segment.c:625:28: warning: symbol 'nilfs_sc_dsync_ops' was not declared. Should it be static?

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:31 +09:00
Ryusuke Konishi
db55d92252 nilfs2: add kernel doc comments to persistent object allocator functions
The implementation of persistent object allocator (alloc.c) is poorly
documented.  This adds kernel doc style comments on that functions.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:31 +09:00
Li Hong
fdce895ea5 nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info
In nilfs_segctor_thread(), timer is a local variable allocated on stack. Its
address can't be set to sci->sc_timer and passed in several procedures.

It works now by chance, just because other procedures are called by
nilfs_segctor_thread() directly or indirectly and the stack hasn't been
deallocated yet.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:31 +09:00
Li Hong
154ac5a830 nilfs2: remove nilfs_segctor_init() in segment.c
There are only two lines of code in nilfs_segctor_init(). From a logic
design view, the first line 'sci->sc_seq_done = sci->sc_seq_request;'
should be put in nilfs_segctor_new(). Even in nilfs_segctor_new(),
this initialization is needless because sci is kzalloc-ed. So
nilfs_segctor_init() is only a wrap call to
nilfs_segctor_start_thread().

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:31 +09:00
Ryusuke Konishi
50614bcf29 nilfs2: insert checkpoint number in segment summary header
This adds a field to record the latest checkpoint number in the
nilfs_segment_summary structure.  This will help to recover the latest
checkpoint number from logs on disk.  This field is intended for
crucial cases in which super blocks have lost pointer to the latest
log.

Even though this will change the disk format, both backward and
forward compatibility is preserved by a size field prepared in the
segment summary header.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:31 +09:00
Li Hong
9f130263f3 nilfs2: add a print message after loading nilfs2
Printing a message after loading a file system is a practice. Add this to
provide a better user-friendly experience.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:30 +09:00
Li Hong
41c88bd74d nilfs2: cleanup multi kmem_cache_{create,destroy} code
This cleanup patch gives several improvements:

 - Moving all kmem_cache_{create_destroy} calls into one place, which removes
 some small function calls, cleans up error check code and clarify the logic.

 - Mark all initial code in __init section.

 - Remove some very obvious comments.

 - Adjust some declarations.

 - Fix some space-tab issues.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:30 +09:00
Ryusuke Konishi
aaed1d5bfa nilfs2: move out checksum routines to segment buffer code
This moves out checksum routines in log writer to segbuf.c for
cleanup.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:30 +09:00
Ryusuke Konishi
1e2b68bf28 nilfs2: move pointer to super root block into logs
This moves a pointer to buffer storing super root block to each log
buffer from nilfs_sc_info struct for simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:30 +09:00
Ryusuke Konishi
277a6a3417 nilfs2: change default of 'errors' mount option to 'remount-ro' mode
Like ext3, nilfs has 'errors' mount option to allow specifying desired
behavior on severe errors.

Currently, the default action is 'errors=continue' and has potential
to advance filesystem corruption for severe errors.

This will change the action to 'errors=remount-ro' to avoid the issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:30 +09:00
Li Hong
73bb48869b nilfs2: Combine nilfs_btree_release_path() and nilfs_btree_free_path()
nilfs_btree_release_path() and nilfs_btree_free_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:29 +09:00
Li Hong
f905440f5e nilfs2: Combine nilfs_btree_alloc_path() and nilfs_btree_init_path()
nilfs_btree_alloc_path() and nilfs_btree_init_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:29 +09:00
Ryusuke Konishi
973bec34bf nilfs2: fix sync silent failure
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set.
And nilfs does not set s_bdi anywhere.  I noticed this problem by the
warning introduced by the recent commit 5129a469 ("Catch filesystem
lacking s_bdi").

 WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e()
 Hardware name: PowerEdge 2850
 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas
 Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38
 Call Trace:
  [<c1028422>] warn_slowpath_common+0x60/0x90
  [<c102845f>] warn_slowpath_null+0xd/0x10
  [<c1095936>] vfs_kern_mount+0xc5/0x14e
  [<c1095a03>] do_kern_mount+0x32/0xbd
  [<c10a811e>] do_mount+0x671/0x6d0
  [<c1073794>] ? __get_free_pages+0x1f/0x21
  [<c10a684f>] ? copy_mount_options+0x2b/0xe2
  [<c107b634>] ? strndup_user+0x48/0x67
  [<c10a81de>] sys_mount+0x61/0x8f
  [<c100280c>] sysenter_do_call+0x12/0x32

This ensures to set s_bdi for nilfs and fixes the sync silent failure.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-03 07:36:01 -07:00
Stephen Rothwell
6a47dc1418 nilfs: fix breakage caused by barrier flag changes
After merging the block tree, today's linux-next build (powerpc ppc64_defconfig)
failed like this:

fs/nilfs2/the_nilfs.c: In function 'nilfs_discard_segments':
fs/nilfs2/the_nilfs.c:673: error: 'DISCARD_FL_BARRIER' undeclared (first use in this function)

Caused by commit fbd9b09a17 ("blkdev:
generalize flags for blkdev_issue_fn functions") interacting with commit
e902ec9906 ("nilfs2: issue discard request
after cleaning segments") (which netered Linus' tree on about March 4 -
before v2.6.34-rc1).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-29 09:32:00 +02:00
Linus Torvalds
44fa2b4bee Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix typo "numer" -> "number" in alloc.c
  nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
  nilfs2: fix a wrong type conversion in nilfs_ioctl()
2010-04-12 18:34:25 -07:00
Ryusuke Konishi
be3bd2223b nilfs2: fix typo "numer" -> "number" in alloc.c
Fixes the typo found in a warning message of a persistent object
allocator function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-04-12 01:51:03 +09:00
Li Hong
308f44193f nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
`make CONFIG_NILFS2_FS=m M=fs/nilfs2/` will give the following warnings:

fs/nilfs2/btree.c: In function 'nilfs_btree_propagate':
fs/nilfs2/btree.c:1882: warning: 'maxlevel' may be used uninitialized in this function
fs/nilfs2/btree.c:1882: note: 'maxlevel' was declared here

Set maxlevel = 0 to fix it.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-04-02 20:03:30 +09:00
Li Hong
753234007f nilfs2: fix a wrong type conversion in nilfs_ioctl()
(void * __user *) should be (void __user *)

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-31 16:55:00 +09:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Ryusuke Konishi
d067633b44 nilfs2: fix imperfect completion wait in nilfs_wait_on_logs
nilfs_wait_on_logs has a potential to slip out before completion of
all bio requests when it met an error.  This synchronization fault may
cause unexpected results, for instance, violative access to freed
segment buffers from an end-bio callback routine.

This fixes the issue by ensuring that nilfs_wait_on_logs waits all
given logs.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-24 01:17:20 +09:00
Ryusuke Konishi
110d735a0a nilfs2: fix hang-up of cleaner after log writer returned with error
According to the report from Andreas Beckmann (Message-ID:
<4BA54677.3090902@abeckmann.de>), nilfs in 2.6.33 kernel got stuck
after a disk full error.

This turned out to be a regression by log writer updates merged at
kernel 2.6.33.  nilfs_segctor_abort_construction, which is a cleanup
function for erroneous cases, was skipping writeback completion for
some logs.

This fixes the bug and would resolve the hang issue.

Reported-by: Andreas Beckmann <debian@abeckmann.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>                     [2.6.33.x]
2010-03-24 00:03:06 +09:00
Ryusuke Konishi
2d8428acae nilfs2: fix duplicate call to nilfs_segctor_cancel_freev
Andreas Beckmann gave me a report that nilfs logged the following
warnings when it got a disk full:

  nilfs_sufile_do_cancel_free: segment 0 must be clean
  nilfs_sufile_do_cancel_free: segment 1 must be clean

These arise from a duplicate call to nilfs_segctor_cancel_freev in an
error path of log writer.  This will fix the issue.

Reported-by: Andreas Beckmann <debian@abeckmann.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-22 14:41:07 +09:00
Ryusuke Konishi
c91cea11df nilfs2: remove whitespaces before quoted newlines
This kills the following checkpatch warnings:

 WARNING: unnecessary whitespace before a quoted newline
 #869: FILE: super.c:869:
 +     	           "remount to a different snapshot. \n",

 WARNING: unnecessary whitespace before a quoted newline
 #389: FILE: the_nilfs.c:389:
 +     	    printk(KERN_ERR "NILFS: too short segment. \n");

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:51 +09:00
Ryusuke Konishi
55480a06e9 nilfs2: remove spaces before tabs
This kills the following checkpatch warnings:

 WARNING: please, no space before tabs
 #74: FILE: segment.h:74:
 +^Iunsigned ^I^Iflags;$

 WARNING: please, no space before tabs
 #35: FILE: segbuf.c:35:
 +^Iint ^I^I^Istart, end; /* The region to be submitted */$

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:51 +09:00
Ryusuke Konishi
7a65004bba nilfs2: fix various typos in comments
This fixes various typos I found in comments of nilfs2.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:51 +09:00
Ryusuke Konishi
1621562b6a nilfs2: fix typo "cout" -> "count" in error message
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:50 +09:00
Ryusuke Konishi
9ccf56c138 nilfs2: fix function name typos in docbook comments
Fixes the following typos in docbook comments:

 nilfs_detroy_transaction_cache -> nilfs_destroy_transaction_cache
 nilfs_secgtor_start_timer -> nilfs_segctor_start_timer

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:50 +09:00
Ryusuke Konishi
6c477d44a7 nilfs2: fix discrepancy in use of static specifier
Two segbuf functions, nilfs_segbuf_write and nilfs_segbuf_wait, are
declared with the static storage class specifier, but their
implementations are not.

This fixes the discrepancy.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:27:27 +09:00
Linus Torvalds
0f2cc4ecd8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  init: Open /dev/console from rootfs
  mqueue: fix typo "failues" -> "failures"
  mqueue: only set error codes if they are really necessary
  mqueue: simplify do_open() error handling
  mqueue: apply mathematics distributivity on mq_bytes calculation
  mqueue: remove unneeded info->messages initialization
  mqueue: fix mq_open() file descriptor leak on user-space processes
  fix race in d_splice_alias()
  set S_DEAD on unlink() and non-directory rename() victims
  vfs: add NOFOLLOW flag to umount(2)
  get rid of ->mnt_parent in tomoyo/realpath
  hppfs can use existing proc_mnt, no need for do_kern_mount() in there
  Mirror MS_KERNMOUNT in ->mnt_flags
  get rid of useless vfsmount_lock use in put_mnt_ns()
  Take vfsmount_lock to fs/internal.h
  get rid of insanity with namespace roots in tomoyo
  take check for new events in namespace (guts of mounts_poll()) to namespace.c
  Don't mess with generic_permission() under ->d_lock in hpfs
  sanitize const/signedness for udf
  nilfs: sanitize const/signedness in dealing with ->d_name.name
  ...

Fix up fairly trivial (famous last words...) conflicts in
drivers/infiniband/core/uverbs_main.c and security/tomoyo/realpath.c
2010-03-04 08:15:33 -08:00
Al Viro
072f98b463 nilfs: sanitize const/signedness in dealing with ->d_name.name
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:07:58 -05:00
Al Viro
0319003d0d nilfs really shouldn't slap struct dentry on stack...
... especially when it only needs (and initializes) .d_name of it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:07:58 -05:00
Jiro SEKIBA
0d561f12b4 nilfs2: add reader's lock for cno in nilfs_ioctl_sync
This adds reader's lock for the_nilfs->cno in nilfs_ioctl_sync,
for the_nilfs->cno should be proctected by segctor_sem when reading.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-20 21:18:19 +09:00
Jiro SEKIBA
03f29365e8 nilfs2: delete unnecessary condition in load_segment_summary
This is a trivial patch to remove unnecessary condition.

load_segment_summary() checks crc of segment_summary OR crc of whole
log data blocks based on boolean argument full_check.  However,
callers of the function pass only 1 as full_check, which means only
whole log data blocks checking code is running all the time.

This patch deletes the condition and full_check argument and also
deletes enum 'NILFS_SEG_FAIL_CHECKSUM_SEGSUM' and corresponding case
clause, for it is nolonger used anymore.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-18 20:09:03 +09:00
Ryusuke Konishi
d1c6b72a72 nilfs2: move iterator to write log into segment buffer
This moves iterator to submit write requests for a series of logs into
segbuf.c, and hides nilfs_segbuf_write() and nilfs_segbuf_wait() in
the file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:03 +09:00
Ryusuke Konishi
e605f0a724 nilfs2: get rid of s_dirt flag use
This replaces s_dirt flag use in nilfs with a new flag added on the
nilfs object.  The s_dirt flag was used to indicate if
sop->write_super() should be called, however the current version of
nilfs does not use the callback.  Thus, it can be replaced with the
own flag.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
2010-02-13 12:26:03 +09:00
Ryusuke Konishi
dcd7618695 nilfs2: get rid of nilfs_segctor_req struct
This will clean up nilfs_segctor_req struct and the obscure request
argument passed among private methods of segment constructor.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:03 +09:00
Jiro SEKIBA
086d1764b2 nilfs2: delete unnecessary condition in nilfs_dat_translate
This is a trivial patch to delete unnecessary condition in nilfs_dat_translate.

nilfs_dat_translate() will asign translated address to *blocknrp if blocknrp
is not NULL.  However the condition is unneeded, because all callers of
nilfs_dat_translate() pass blocknrp properly.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:03 +09:00
Ryusuke Konishi
fe5f171bb2 nilfs2: fix potential hang in nilfs_error on errors=remount-ro
nilfs_error() calls nilfs_detach_segment_constructor() if
errors=remount-ro option is specified, and this may lead to a hang due
to recursive locking of, for instance, nilfs->ns_segctor_sem and
others.

In this case, detaching segment constructor is not necessary because
read-only flag is set to the filesystem and further writes are
blocked.

This fixes the potential hang issue by removing the
nilfs_detach_segment_constructor() call from nilfs_error.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:03 +09:00
Ryusuke Konishi
7512487e6d nilfs2: use mnt_want_write in ioctls where write access is needed
A few nilfs2 ioctls need to ask for and then later release write
access to the mount in order to avoid potential write to read-only
mounts.

This adds the missing mnt_want_write and mnt_drop_write in
nilfs_ioctl_change_cpmode, nilfs_ioctl_delete_checkpoint, and
nilfs_ioctl_clean_segments.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:02 +09:00
Jiro SEKIBA
e902ec9906 nilfs2: issue discard request after cleaning segments
This adds a function to send discard requests for given array of
segment numbers, and calls the function when garbage collection
succeeded.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:02 +09:00
Ryusuke Konishi
3256a05531 nilfs2: fix potential leak of dirty data on umount
This fixes incorrect usage of nilfs_segctor_confirm() test function in
nilfs_segctor_destroy(); nilfs_segctor_confirm() returns zero if the
filesystem is not clean, so its use in nilfs_segctor_destroy() needs
inversion.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-01-31 14:57:31 +09:00
Tobias Klauser
33e189bd57 nilfs2: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-12-25 13:01:50 +09:00
Jiro SEKIBA
5ee5814832 nilfs2: trivial coding style fix
This is a trivial style fix patch to mend errors/warnings
reported by "checkpatch.pl --file".

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-12-25 13:01:50 +09:00
Linus Torvalds
b6e3224fb2 Revert "task_struct: make journal_info conditional"
This reverts commit e4c570c4cb, as
requested by Alexey:

 "I think I gave a good enough arguments to not merge it.
  To iterate:
   * patch makes impossible to start using ext3 on EXT3_FS=n kernels
     without reboot.
   * this is done only for one pointer on task_struct"

  None of config options which define task_struct are tristate directly
  or effectively."

Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17 13:23:24 -08:00
Al Viro
a95161aaa8 switch nilfs2 to deactivate_locked_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:42 -05:00
Hiroshi Shimamoto
e4c570c4cb task_struct: make journal_info conditional
journal_info in task_struct is used in journaling file system only.  So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:27 -08:00
Ryusuke Konishi
a694291a62 nilfs2: separate wait function from nilfs_segctor_write
This separates wait function for submitted logs from the write
function nilfs_segctor_write().  A new list of segment buffers
"sc_write_logs" is added to hold logs under writing, and double
buffering is partially applied to hide io latency.

At this point, the double buffering is disabled for blocksize <
pagesize because page dirty flag is turned off during write and dirty
buffers are not properly collected for pages crossing over segments.

To receive full benefit of the double buffering, further refinement is
needed to move the io wait outside the lock section of log writer.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-30 21:17:52 +09:00
Ryusuke Konishi
e29df395bc nilfs2: add iterator for segment buffers
This adds a few iterator functions for segment buffers to make it easy
to handle multiple series of logs.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-30 21:06:35 +09:00
Ryusuke Konishi
9c965bac16 nilfs2: hide nilfs_write_info struct in segment buffer code
Hides nilfs_write_info struct and nilfs_segbuf_prepare_write function
in segbuf.c to simplify the interface of nilfs_segbuf_write function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-30 21:06:35 +09:00
Ryusuke Konishi
9284ad2a90 nilfs2: relocate io status variables to segment buffer
This moves io status variables in nilfs_write_info struct to
nilfs_segment_buffer struct.

This is a preparation to hide nilfs_write_info in segment buffer code.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-30 21:05:57 +09:00
Ryusuke Konishi
5f1586d0dd nilfs2: do not return io error for bio allocation failure
Previously, log writer had possibility to set an io error flag on
segments even in case of memory allocation failure.

This fixes the issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-29 19:59:00 +09:00
Ryusuke Konishi
0935db7477 nilfs2: use list_splice_tail or list_splice_tail_init
This applies list_splice_tail (or list_splice_tail_init) operation
instead of list_splice (or list_splice_init, respectively) to append a
new list to tail of an existing list.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-29 02:50:46 +09:00
Jiro SEKIBA
abdb318b79 nilfs2: replace mark_inode_dirty as nilfs_mark_inode_dirty
Replace mark_inode_dirty() as nilfs_mark_inode_dirty()
to reduce deep function calls.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:16 +09:00
Jiro SEKIBA
3534573b58 nilfs2: delete mark_inode_dirty in nilfs_delete_entry
Delete mark_inode_dirty() in nilfs_delete_entry() to reduce duplicate
mark_inode_dirty() calls both in nilfs_rename() and nilfs_delete_entry().

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:16 +09:00
Jiro SEKIBA
58d55471cb nilfs2: delete mark_inode_dirty in nilfs_commit_chunk
Delete mark_inode_dirty() in nilfs_commit_chunk(), for callers of
nilfs_commit_chunk() will call equivalent mark_inode_dirty()
after calling nilfs_commit_chunk().

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:16 +09:00
Jiro SEKIBA
2093abf9cb nilfs2: change return type of nilfs_commit_chunk
change return type of nilfs_commit_chunk() as void from int,
for nilfs_set_file_dirty() usually does not return error.

This is an intermediate patch to reduce mark_inode_dirty() in
nilfs_commit_chunk().

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Jiro SEKIBA
4cd76c3c93 nilfs2: split nilfs_unlink as nilfs_do_unlink and nilfs_unlink
Split nilfs_unlink() to reduce nested transaction and duplicate
mark_inode_dirty() calls when calling nilfs_unlink() from nilfs_rmdir().

nilfs_do_unlink() is an actual unlink functionality which is not
in transaction and does not call mark_inode_dirty() for dentry argument.

nilfs_unlink() is a wrapper function for do_nilfs_unlink() with
transaction and mark_inode_dirty() for dentry argument.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Jiro SEKIBA
1749147276 nilfs2: delete redundant mark_inode_dirty
delete redundant mark_inode_dirty() calls

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Jiro SEKIBA
565de406e7 nilfs2: expand inode_inc_link_count and inode_dec_link_count
This is an intermidiate patch to reduce redandunt mark_inode_dirty() calls
by calling inode_inc_link_count() and inode_dec_link_count() functions.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Jiro SEKIBA
43f8bc262f nilfs2: delete mark_inode_dirty from nilfs_set_link
Delete mark_inode_dirty() from nilfs_set_link() to reduce redundant
mark_inode_dirty() calls in caller of nilfs_set_link().

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Jiro SEKIBA
9ca941d4b6 nilfs2: delete mark_inode_dirty in nilfs_new_inode
It is redundant to call mark_inode_dirty() in nilfs_new_inode() because
all caller of nilfs_new_inode() will call mark_inode_dirty()
after calling nilfs_new_inode() directly or indirectly in transaction.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Ryusuke Konishi
0234576d04 nilfs2: add norecovery mount option
This adds "norecovery" mount option which disables temporal write
access to read-only mounts or snapshots during mount/recovery.
Without this option, write access will be even performed for those
types of mounts; the temporal write access is needed to mount root
file system read-only after an unclean shutdown.

This option will be helpful when user wants to prevent any write
access to the device.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Eric Sandeen <sandeen@redhat.com>
2009-11-20 10:05:52 +09:00
Ryusuke Konishi
a057d2c011 nilfs2: add helper to get if volume is in a valid state
This adds a helper function, nilfs_valid_fs() which returns if nilfs
is in a valid state or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:52 +09:00
Ryusuke Konishi
f50a4c8149 nilfs2: move recovery completion into load_nilfs function
Although mount recovery of nilfs is integrated in load_nilfs()
procedure, the completion of recovery was isolated from the procedure
and performed at the end of the fill_super routine.

This was somewhat confusing since the recovery is needed for the nilfs
object, not for a super block instance.

To resolve the inconsistency, this will integrate the recovery
completion into load_nilfs().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:52 +09:00
Ryusuke Konishi
050b4142c9 nilfs2: apply readahead for recovery on mount
This inserts readahead in the recovery code.  The readahead request is
issued per segment while searching the latest super root block.

This will shorten mount time after unclean unmount.  A measurement
shows the recovery time was reduced by more than 60 percent:

 e.g. real  0m11.586s -> 0m3.918s  (x 2.96)

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
f021759d74 nilfs2: clean up get/put function of a segment usage
This eliminates obsolete nilfs_get_sufile_get_segment_usage() and
nilfs_set_sufile_segment_usage() from sufile.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
071ec54dd7 nilfs2: move routine to set segment usage into sufile
This adds nilfs_sufile_set_segment_usage() function in sufile to
replace direct access to the sufile metadata in log writer code.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
61a189e9c6 nilfs2: move routine marking segment usage dirty into sufile
This adds nilfs_sufile_mark_dirty() function in sufile to replace
nilfs_touch_segusage() function in log writer code.  This is a
preparation for the further cleanup which will move out low level
sufile operations in the log writer.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
70622a2091 nilfs2: insert cache operation in palloc get block routines
This implements cache operation in get block routines of palloc code:
nilfs_palloc_get_desc_block(), nilfs_palloc_get_bitmap_block(), and
nilfs_palloc_get_entry_block().

This will complete the palloc cache.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
49fa7a5902 nilfs2: add palloc cache to ifile
This adds the palloc cache to ifile.  The palloc cache is allocated on
the extended region of nilfs_mdt_info struct.  The struct
nilfs_ifile_info defines the extended on memory structure of ifile.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
c3ea56c800 nilfs2: flush palloc cache before manipulating data pages of GC dat
Data pages in gcdat metadata file (i.e. the secondary DAT for GC), are
cleared or even moved back to the normal DAT when a shot of garbage
collection was done.

Buffer heads held by the palloc cache of gcdat must be cleared before
these page cache manipulation.  This adds nilfs_palloc_clear_cache()
to ensure this.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
8908b2f70b nilfs2: add palloc cache to dat
This adds the palloc cache to DAT file.  The palloc cache is allocated
on the extended region of nilfs_mdt_info struct.  The struct
nilfs_dat_info defines the extended on memory structure of DAT.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
db38d5ad32 nilfs2: add cache framework for persistent object allocator
This adds setup and cleanup routines of the persistent object
allocator cache.

According to ftrace analyses, accessing buffers of the DAT file
suffers indispensable overhead many times.  To mitigate the overhead,
This introduce cache framework for the persistent object allocator
(palloc) which the DAT file and ifile are using.

struct nilfs_palloc_cache represents the cache object per metadata
file using palloc.

The cache is initialized through nilfs_palloc_setup_cache() and
destroyed by nilfs_palloc_destroy_cache(); callers of the former
function will be added to individual allocators of DAT and ifile on
successive patches.

nilfs_palloc_destroy_cache() will be called from nilfs_mdt_destroy()
if the cache is attached to a metadata file.  A companion function
nilfs_palloc_clear_cache() is provided to allow releasing buffer head
references independently with the cleanup task.  This adjunctive
function will be used before invalidating pages of metadata file with
the cache.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
141bbdba9c nilfs2: unfold nilfs_palloc_block_get_bitmap function
This expands a trivial address calculation in the function into its
every callsite. This expansion improves readability of the callers.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
1376e931b7 nilfs2: eliminate nilfs_btnode_get function
This removes the obsolete nilfs_btnode_get() function and makes
nilfs_btree_get_block() directly call nilfs_btnode_submit_block().

This expansion will provide better opportunity for code optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
75f65edfcc nilfs2: remove newblk argument from nilfs_btnode_submit_block
This removes the obsolete argument from nilfs_btnode_submit_block().
This will complete separating a create function of btree node.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi
45f4910bc0 nilfs2: use nilfs_btnode_create_block function
This displaces nilfs_btnode_get() use to create new btree node block
with nilfs_btnode_create_block.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
d501d73689 nilfs2: separate function for creating new btree node block
Adds a separate routine for creating a btree node block.  This is a
preparation to reduce the depth of function calls during submitting
btree node buffer.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
b34a65069c nilfs2: avoid readahead on metadata file for create mode
This turns off readhead action of metadata file if nilfs_mdt_get_block
function was called with a create flag.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
ef7d4757a5 nilfs2: simplify nilfs_sufile_get_ncleansegs function
Previously, this function took an status code to return possible error
codes.  The ("nilfs2: add local variable to cache the number of clean
segments") patch removed the possibility to return errors.

So, this simplifies the function definition to make it directly return
the number of clean segments.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
aa474a2201 nilfs2: add local variable to cache the number of clean segments
This makes it possible for sufile to get the number of clean segments
faster.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
7b16c8a211 nilfs2: unfold nilfs_sufile_block_get_header function
This unfolds the nilfs_sufile_block_get_header() function for
simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
fd66c0d5c3 nilfs2: hide nilfs_mdt_clear calls in nilfs_mdt_destroy
This will hide a function call of nilfs_mdt_clear() in
nilfs_mdt_destroy().

This ensures nilfs_mdt_destroy() to do cleanup jobs included in
nilfs_mdt_clear().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
3961f0e277 nilfs2: eliminate inlines to directly read/write inode of metadata files
Removes two inline functions: nilfs_mdt_read_inode_direct() and
nilfs_mdt_write_inode_direct().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
8707df3847 nilfs2: separate read method of meta data files on super root block
Will displace nilfs_mdt_read_inode_direct function with an individual
read method: nilfs_dat_read, nilfs_sufile_read, nilfs_cpfile_read.

This provides the opportunity to initialize local variables of each
metadata file after reading the inode.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
79739565e1 nilfs2: separate constructor of metadata files
This will displace nilfs_mdt_new() constructor with individual
metadata file constructors like nilfs_dat_new(), new_sufile_new(),
nilfs_cpfile_new(), and nilfs_ifile_new().

This makes it possible for each metadata file to have own
intialization code.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
5731e191f2 nilfs2: add size option of private object to metadata file allocator
This adds an optional "object size" argument to nilfs_mdt_new_common()
function; the argument specifies the size of private object attached
to a newly allocated metadata file inode.

This will afford space to keep local variables for meta data files.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
9cb4e0d2b9 nilfs2: move out mark_inode_dirty calls from bmap routines
Previously, nilfs_bmap_add_blocks() and nilfs_bmap_sub_blocks() called
mark_inode_dirty() after they changed the number of data blocks.

This moves these calls outside bmap outermost functions like
nilfs_bmap_insert() or nilfs_bmap_truncate().

This will mitigate overhead for truncate or delete operation since
they repeatedly remove set of blocks.  Nearly 10 percent improvement
was observed for removal of a large file:

 # dd if=/dev/zero of=/test/aaa bs=1M count=512
 # time rm /test/aaa

  real  2.968s -> 2.705s

Further optimization may be possible by eliminating these
mark_inode_dirty() uses though I avoid mixing separate changes here.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Ryusuke Konishi
09bf4aae0a nilfs2: stop marking metadata inode dirty within btree operations
Since metadata file routines mark the inode dirty after they
successfully changed bmap objects, nilfs_mdt_mark_dirty() calls in
nilfs_bmap_add_blocks() and nilfs_bmap_sub_blocks() are redundant.

This removes these overlapping calls from the bmap routines.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Ryusuke Konishi
30db4e6c3d nilfs2: remove buffer locking from btree code
lock_buffer() and unlock_buffer() uses in btree.c are eliminable
because btree functions gain buffer heads through nilfs_btnode_get(),
which never returns an on-the-fly buffer.

Although nilfs_clear_dirty_page() and nilfs_copy_back_pages() in
nilfs_commit_gcdat_inode() juggle btree node buffers of DAT, this is
safe because these operations are protected by a log writer lock or
the metadata file semaphore of DAT.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Ryusuke Konishi
a49762fd11 nilfs2: remove buffer locking in nilfs_mark_inode_dirty
This lock is eliminable because inodes on the buffer can be updated
independently.  Although a log writer also fills in bmap data on the
on-disk inodes, this update is exclusively done by a log writer lock.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Jiro SEKIBA
e2073e7857 nilfs2: cleanup unused match_bool function
match_bool function is not used anymore.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Jiro SEKIBA
91f1953bf3 nilfs2: Using nobarrier option instead of barrier=off
Since most of fs using nofoobar style option,
modified barrier=off option as nobarrier.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Jiro SEKIBA
6600b9dd8e nilfs2: move definition of struct nilfs_btree_node
This is a trivial patch to expose struct nilfs_fs_btree_node.
The struct should be exposed outside of kernel, for it is disk format.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:46 +09:00
Ryusuke Konishi
9b945d537d nilfs2: get rid of BUG_ON use in btree lookup routines
The current btree lookup routines make a kernel oops when detected
inconsistency in btree blocks.  These routines should instead return a
proper error code because the inconsistency usually comes from
corruption of on-disk metadata.

This fixes the issue by converting BUG_ON calls to proper error
handlings.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:46 +09:00
Jiro SEKIBA
18dafac1a4 nilfs2: deleted inconsistent comment in nilfs_load_inode_block()
The comment says, "Caller of this function MUST lock s_inode_lock",
however just above the comment, it locks s_inode_lock in the function.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-15 17:17:46 +09:00
Ryusuke Konishi
c1ea985c71 nilfs2: fix lock order reversal in chcp operation
Will fix the following lock order reversal lockdep detected:

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-rc6 #7
-------------------------------------------------------
chcp/30157 is trying to acquire lock:
 (&nilfs->ns_mount_mutex){+.+.+.}, at: [<fed7cfcc>] nilfs_cpfile_change_cpmode+0x46/0x752 [nilfs2]

but task is already holding lock:
 (&nilfs->ns_segctor_sem){++++.+}, at: [<fed7ca32>] nilfs_transaction_begin+0xba/0x110 [nilfs2]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&nilfs->ns_segctor_sem){++++.+}:
       [<c105799c>] __lock_acquire+0x109c/0x139d
       [<c1057d26>] lock_acquire+0x89/0xa0
       [<c14151e2>] down_read+0x31/0x45
       [<fed6d77b>] nilfs_attach_checkpoint+0x8f/0x16b [nilfs2]
       [<fed6e393>] nilfs_get_sb+0x3e7/0x653 [nilfs2]
       [<c10c0ccb>] vfs_kern_mount+0x8b/0x124
       [<c10c0db2>] do_kern_mount+0x37/0xc3
       [<c10d7517>] do_mount+0x64d/0x69d
       [<c10d75cd>] sys_mount+0x66/0x95
       [<c1002a14>] sysenter_do_call+0x12/0x32

-> #1 (&type->s_umount_key#31/1){+.+.+.}:
       [<c105799c>] __lock_acquire+0x109c/0x139d
       [<c1057d26>] lock_acquire+0x89/0xa0
       [<c104c0f3>] down_write_nested+0x34/0x52
       [<c10c08fe>] sget+0x22e/0x389
       [<fed6e133>] nilfs_get_sb+0x187/0x653 [nilfs2]
       [<c10c0ccb>] vfs_kern_mount+0x8b/0x124
       [<c10c0db2>] do_kern_mount+0x37/0xc3
       [<c10d7517>] do_mount+0x64d/0x69d
       [<c10d75cd>] sys_mount+0x66/0x95
       [<c1002a14>] sysenter_do_call+0x12/0x32

-> #0 (&nilfs->ns_mount_mutex){+.+.+.}:
       [<c1057727>] __lock_acquire+0xe27/0x139d
       [<c1057d26>] lock_acquire+0x89/0xa0
       [<c1414d63>] mutex_lock_nested+0x41/0x23e
       [<fed7cfcc>] nilfs_cpfile_change_cpmode+0x46/0x752 [nilfs2]
       [<fed801b2>] nilfs_ioctl+0x11a/0x7da [nilfs2]
       [<c10cca12>] vfs_ioctl+0x27/0x6e
       [<c10ccf93>] do_vfs_ioctl+0x491/0x4db
       [<c10cd022>] sys_ioctl+0x45/0x5f
       [<c1002a14>] sysenter_do_call+0x12/0x32

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-13 10:33:24 +09:00
Ryusuke Konishi
c083234f15 nilfs2: fix missing cleanup of gc cache on error cases
This fixes an -rc1 regression brought by the commit:
1cf58fa840 ("nilfs2: shorten freeze
period due to GC in write operation v3").

Although the patch moved out a function call of
nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from
nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding
cleanup job needed for the error case.

This will move the missing cleanup job to the destination function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jiro SEKIBA <jir@unicus.jp>
2009-11-08 19:04:25 +09:00
Ryusuke Konishi
5399dd1fc8 nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks
This fixes a kernel oops reported by Markus Trippelsdorf in the email
titled "[NILFS users] kernel Oops while running nilfs_cleanerd".

The oops was caused by a bug of error path in
nilfs_ioctl_move_blocks() function, which was inlined in
nilfs_ioctl_clean_segments().

nilfs_ioctl_move_blocks checks duplication of blocks which will be
moved in garbage collection.  But, the check should have be done
within nilfs_ioctl_move_inode_block() to prevent list corruption among
buffers storing the target blocks.

To fix the kernel oops, this moves forward the duplication check
before the list insertion.

I also tested this for stable trees [2.6.30, 2.6.31].

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>
2009-11-08 19:01:35 +09:00
Ryusuke Konishi
05b4358ad5 nilfs2: add zero-fill for new btree node buffers
Adds missing initialization of newly allocated b-tree node buffers.
This avoids garbage data to be mixed in b-tree node blocks.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-03 12:32:03 +09:00
Ryusuke Konishi
aeda7f6343 nilfs2: fix irregular checkpoint creation due to data flush
When nilfs flushes out dirty data to reduce memory pressure, creation
of checkpoints is wrongly postponed.  This bug causes irregular
checkpoint creation especially in small footprint systems.

To correct this issue, a timer for the checkpoint creation has to be
continued if a log writer does not create a checkpoint.

This will do the correction.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-03 12:32:03 +09:00
Ryusuke Konishi
b1e19e5601 nilfs2: fix dirty page accounting leak causing hang at write
Bruno Prémont and Dunphy, Bill noticed me that NILFS will certainly
hang on ARM-based targets.

I found this was caused by an underflow of dirty pages counter.  A
b-tree cache routine was marking page dirty without adjusting page
account information.

This fixes the dirty page accounting leak and resolves the hang on
arm-based targets.

Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Reported-by: Dunphy, Bill <WDunphy@tandbergdata.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable <stable@kernel.org>
2009-11-03 12:31:36 +09:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Ryusuke Konishi
3cc811bffd nilfs2: fix missing initialization of i_dir_start_lookup member
The i_dir_start_lookup field in nilfs_inode_info objects should be
cleared when the objects are allocated, but the the initialization was
missing in case of reading from disk.  This adds the initialization.

Since the variable just gives a start page on directory lookups, the
bug was nonfatal until now.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-29 20:32:13 +09:00
Ryusuke Konishi
1f28fcd925 nilfs2: fix missing zero-fill initialization of btree node cache
This will fix file system corruption which infrequently happens after
mount.  The problem was reported from users with the title "[NILFS
users] Fail to mount NILFS." (Message-ID:
<200908211918.34720.yuri@itinteg.net>), and so forth.  I've also
experienced the corruption multiple times on kernel 2.6.30 and 2.6.31.

The problem turned out to be caused due to discordance between
mapping->nrpages of a btree node cache and the actual number of pages
hung on the cache; if the mapping->nrpages becomes zero even as it has
pages, truncate_inode_pages() returns without doing anything.  Usually
this is harmless except it may cause page leak, but garbage collection
fairly infrequently sees a stale page remained in the btree node cache
of DAT (i.e. disk address translation file of nilfs), and induces the
corruption.

I identified a missing initialization in btree node caches was the
root cause.  This corrects the bug.

I've tested this for kernel 2.6.30 and 2.6.31.

Reported-by: Yuri Chislov <yuri@itinteg.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>
2009-09-29 20:12:56 +09:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Alexey Dobriyan
6e1d5dcc2b const: mark remaining inode_operations as const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Alexey Dobriyan
7f09410bbc const: mark remaining address_space_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Alexey Dobriyan
ac4cfdd6d1 const: mark remaining export_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Alexey Dobriyan
b87221de6a const: mark remaining super_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Jens Axboe
2c96ce9f20 fs: remove bdev->bd_inode_backing_dev_info
It has been unused since it was introduced in:

commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac
Author: Andrew Morton <akpm@osdl.org>
Date:   Fri May 21 00:46:17 2004 -0700

    [PATCH] block device layer: separate backing_dev_info infrastructure

So lets just kill it.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:16:18 +02:00
Ryusuke Konishi
41f4db0f48 fs/Kconfig: move nilfs2 outside misc filesystems
Some people asked me questions like the following:

On Wed, 15 Jul 2009 13:11:21 +0200, Leon Woestenberg wrote:
> just wondering, any reasons why NILFS2 is one of the miscellaneous
> filesystems and, for example, btrfs, is not in Kconfig?

Actually, nilfs is NOT a filesystem came from other operating systems,
but a filesystem created purely for Linux.  Nor is it a flash
filesystem but that for generic block devices.

So, this moves nilfs outside the misc category as I responded in LKML
"Re: Why does NILFS2 hide under Miscellaneous filesystems?"
(Message-Id: <20090716.002526.93465395.ryusuke@osrg.net>).

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:16 +09:00
Ryusuke Konishi
0f3fe33b39 nilfs2: convert nilfs_bmap_lookup to an inline function
The nilfs_bmap_lookup() is now a wrapper function of
nilfs_bmap_lookup_at_level().

This moves the nilfs_bmap_lookup() to a header file converting it to
an inline function and gives an opportunity for optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:16 +09:00
Ryusuke Konishi
2e0c2c7392 nilfs2: allow btree code to directly call dat operations
The current btree code is written so that btree functions call dat
operations via wrapper functions in bmap.c when they allocate, free,
or modify virtual block addresses.

This abstraction requires additional function calls and causes
frequent call of nilfs_bmap_get_dat() function since it is used in the
every wrapper function.

This removes the wrapper functions and makes them available from
btree.c and direct.c, which will increase the opportunity of
compiler optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:16 +09:00
Ryusuke Konishi
bd8169efae nilfs2: add update functions of virtual block address to dat
This is a preparation for the successive cleanup ("nilfs2: allow btree
to directly call dat operations").

This adds functions bundling a few operations to change an entry of
virtual block address on the dat file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Ryusuke Konishi
7a102b0923 nilfs2: remove individual gfp constants for each metadata file
This gets rid of NILFS_CPFILE_GFP, NILFS_SUFILE_GFP, NILFS_DAT_GFP,
and NILFS_IFILE_GFP.  All of these constants refer to NILFS_MDT_GFP,
and can be removed.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Ryusuke Konishi
3218929dbd nilfs2: stop zero-fill of btree path just before free it
The btree path object is cleared just before it is freed.

This will remove the code doing the unnecessary clear operation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Ryusuke Konishi
6d28f7ea43 nilfs2: remove unused btree argument from btree functions
Even though many btree functions take a btree object as their first
argument, most of them are not used in their functions.

This sticky use of the btree argument is hurting code readability and
giving the possibility of inefficient code generation.

So, this removes the unnecessary btree arguments.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Ryusuke Konishi
9ead986373 nilfs2: remove nilfs_dat_abort_start and nilfs_dat_abort_free
These functions are not called from any functions.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Jiro SEKIBA
1cf58fa840 nilfs2: shorten freeze period due to GC in write operation v3
This is a re-revised patch to shorten freeze period.
This version include a fix of the bug Konishi-san mentioned last time.

When GC is runnning, GC moves live block to difference segments.
Copying live blocks into memory is done in a transaction,
however it is not necessarily to be in the transaction.
This patch will get the nilfs_ioctl_move_blocks() out from
transaction lock and put it before the transaction.

I ran sysbench fileio test against nilfs partition.
I copied some DVD/CD images and created snapshot to create live blocks
before starting the benchmark.

Followings are summary of rc8 and rc8 w/ the patch of per-request
statistics, which is min/max and avg.  I ran each test three times and
bellow is average of those numers.

According to this benchmark result, average time is slightly degrated.
However, worstcase (max) result is significantly improved.
This can address a few seconds write freeze.

- random write per-request performance of rc8
 min   0.843ms
 max 680.406ms
 avg   3.050ms
- random write per-request performance of rc8 w/ this patch
 min   0.843ms -> 100.00%
 max 380.490ms ->  55.90%
 avg   3.233ms -> 106.00%

- sequential write per-request performance of rc8
 min   0.736ms
 max 774.343ms
 avg   2.883ms
- sequential write per-request performance of rc8 w/ this patch
 min   0.720ms ->  97.80%
 max  644.280ms->  83.20%
 avg   3.130ms -> 108.50%

-----8<-----8<-----nilfs_cleanerd.conf-----8<-----8<-----
protection_period       150
selection_policy        timestamp       # timestamp in ascend order
nsegments_per_clean     2
cleaning_interval       2
retry_interval          60
use_mmap
log_priority            info
-----8<-----8<-----nilfs_cleanerd.conf-----8<-----8<-----

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Zhu Yanhai
43be0ec038 nilfs2: add more check routines in mount process
nilfs2: Add more safeguard routines and protections in mount process,
which also makes nilfs2 report consistency error messages when
checkpoint number is invalid.

Signed-off-by: Zhu Yanhai <zhu.yanhai@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Zhang Qiang
a4f0b9c5b4 nilfs2: An unassigned variable is assigned to a never used structure member
nilfs2: In procedure 'nilfs_get_sb()', when a nilfs filesysttem is
mounted for the first time, local variable 'nilfs->ns_last_cno' is
used before loading the latest checkpoint number from disk (in
'nilfs_fill_super'). 'nilfs->ns_last_cno' is assigned to 'sd.cno', but
'sd.cno' has never been used in the procedure.

Signed-off-by: Zhang Qiang <zhangqiang.buaa@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Ryusuke Konishi
c1b353f04a nilfs2: use GFP_NOIO for bio_alloc instead of GFP_NOWAIT
Alberto Bertogli advised me about bio_alloc() use in nilfs:
On Sat, 13 Jun 2009 22:52:40 -0300, Alberto Bertogli wrote:
> By the way, those bio_alloc()s are using GFP_NOWAIT but it looks
> like they could use at least GFP_NOIO or GFP_NOFS, since the caller
> can (and sometimes do) sleep. The only caller is nilfs_submit_bh(),
> which calls nilfs_submit_seg_bio() which can sleep calling
> wait_for_completion().

This takes in the comment and replaces the use of GFP_NOWAIT flag with
GFP_NOIO.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Jiro SEKIBA
1dfa27105a nilfs2: stop using periodic write_super callback
This removes nilfs_write_super and commit super block in nilfs
internal thread, instead of periodic write_super callback.

VFS layer calls ->write_super callback periodically.  However,
it looks like that calling back is ommited when disk I/O is busy.
And when cleanerd (nilfs GC) is runnig, disk I/O tend to be busy thus
nilfs superblock is not synchronized as nilfs designed.

To avoid it, syncing superblock by nilfs thread instead of pdflush.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Jiro SEKIBA
79efdd9411 nilfs2: clean up nilfs_write_super
Separate conditions that check if syncing super block and alternative
super block are required as inline functions to reuse the conditions.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Jiro SEKIBA
6233caa9d5 nilfs2: fix disorder of nilfs_write_super in nilfs_sync_fs
This fixes disorder of nilfs_write_super in nilfs_sync_fs.  Commiting
super block must be the end of the function so that every changes are
reflected.

->sync_fs() is not called frequently so this makes nilfs_sync_fs call
nilfs_commit_super instead of nilfs_write_super.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Jiro SEKIBA
ec5d66abdb nilfs2: remove redundant super block commit
This removes redundant super block commit.

nilfs_write_super will call nilfs_commit_super to store super block
into block device.  However, nilfs_put_super will call
nilfs_commit_super right after calling nilfs_write_super.  So calling
nilfs_write_super in nilfs_put_super would be redundant.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:13 +09:00
Jiro SEKIBA
b58a285ba4 nilfs2: implement nilfs_show_options to display mount options in /proc/mounts
This is a patch to display mount options in procfs.
Mount options will show up in the /proc/mounts as other fs does.

...
/dev/sda6 /mnt nilfs2 ro,relatime,barrier=off,cp=3,order=strict 0 0
...

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:13 +09:00
Ryusuke Konishi
1435110467 nilfs2: always lookup disk block address before reading metadata block
The current metadata file code skips disk address lookup for its data
block if the buffer has a mapped flag.

This has a potential risk to cause read request to be performed
against the stale block address that GC moved, and it may lead to meta
data corruption.  The mapped flag is safe if the buffer has an
uptodate flag, otherwise it may prevent necessary update of disk
address in the next read.

This will avoid the potential problem by ensuring disk address lookup
before reading metadata block even for buffers with the mapped flag.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:13 +09:00
Ryusuke Konishi
027d6404eb nilfs2: use semaphore to protect pointer to a writable FS-instance
will get rid of nilfs_get_writer() and nilfs_put_writer() pair used to
retain a writable FS-instance for a period.

The pair functions were making up some kind of recursive lock with a
mutex, but they became overkill since the commit
201913ed74.  Furthermore, they caused
the following lockdep warning because the mutex can be released by a
task which didn't lock it:

 =====================================
 [ BUG: bad unlock balance detected! ]
 -------------------------------------
 kswapd0/422 is trying to release lock (&nilfs->ns_writer_mutex) at:
 [<c1359ff5>] mutex_unlock+0x8/0xa
 but there are no more locks to release!

 other info that might help us debug this:
 no locks held by kswapd0/422.

 stack backtrace:
 Pid: 422, comm: kswapd0 Not tainted 2.6.31-rc4-nilfs #51
 Call Trace:
  [<c1358f97>] ? printk+0xf/0x18
  [<c104fea7>] print_unlock_inbalance_bug+0xcc/0xd7
  [<c11578de>] ? prop_put_global+0x3/0x35
  [<c1050195>] lock_release+0xed/0x1dc
  [<c1359ff5>] ? mutex_unlock+0x8/0xa
  [<c1359f83>] __mutex_unlock_slowpath+0xaf/0x119
  [<c1359ff5>] mutex_unlock+0x8/0xa
  [<d1284add>] nilfs_mdt_write_page+0xd8/0xe1 [nilfs2]
  [<c1092653>] shrink_page_list+0x379/0x68d
  [<c109171b>] ? isolate_pages_global+0xb4/0x18c
  [<c1092bd2>] shrink_list+0x26b/0x54b
  [<c10930be>] shrink_zone+0x20c/0x2a2
  [<c10936b7>] kswapd+0x407/0x591
  [<c1091667>] ? isolate_pages_global+0x0/0x18c
  [<c1040603>] ? autoremove_wake_function+0x0/0x33
  [<c10932b0>] ? kswapd+0x0/0x591
  [<c104033b>] kthread+0x69/0x6e
  [<c10402d2>] ? kthread+0x0/0x6e
  [<c1003e33>] kernel_thread_helper+0x7/0x1a

This patch uses a reader/writer semaphore instead of the own lock and
kills this warning.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:13 +09:00
Heiko Carstens
b5696e5e0d nilfs2: fix format string compile warning (ino_t)
Unlike on most other architectures ino_t is an unsigned int on s390.
So add an explicit cast to avoid this compile warning:

fs/nilfs2/recovery.c: In function 'recover_dsync_blocks':
fs/nilfs2/recovery.c:555: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:13 +09:00
Ryusuke Konishi
1b2f5a641b nilfs2: fix ignored error code in __nilfs_read_inode()
The __nilfs_read_inode function is ignoring the error code returned
from nilfs_read_inode_common(), and wrongly delivers a success code
(zero) when it escapes from the function in erroneous cases.

This adds the missing error handling.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:12 +09:00
Ryusuke Konishi
b1f1b8ce0a nilfs2: fix preempt count underflow in nilfs_btnode_prepare_change_key
This will fix the following preempt count underflow reported from
users with the title "[NILFS users] segctord problem" (Message-ID:
<949415.6494.qm@web58808.mail.re1.yahoo.com> and Message-ID:
<debc30fc0908270825v747c1734xa59126623cfd5b05@mail.gmail.com>):

 WARNING: at kernel/sched.c:4890 sub_preempt_count+0x95/0xa0()
 Hardware name: HP Compaq 6530b (KR980UT#ABC)
 Modules linked in: bridge stp llc bnep rfcomm l2cap xfs exportfs nilfs2 cowloop loop vboxnetadp vboxnetflt vboxdrv btusb bluetooth uvcvideo videodev v4l1_compat v4l2_compat_ioctl32 arc4 snd_hda_codec_analog ecb iwlagn iwlcore rfkill lib80211 mac80211 snd_hda_intel snd_hda_codec ehci_hcd uhci_hcd usbcore snd_hwdep snd_pcm tg3 cfg80211 psmouse snd_timer joydev libphy ohci1394 snd_page_alloc hp_accel lis3lv02d ieee1394 led_class i915 drm i2c_algo_bit video backlight output i2c_core dm_crypt dm_mod
 Pid: 4197, comm: segctord Not tainted 2.6.30-gentoo-r4-64 #7
 Call Trace:
  [<ffffffff8023fa05>] ? sub_preempt_count+0x95/0xa0
  [<ffffffff802470f8>] warn_slowpath_common+0x78/0xd0
  [<ffffffff8024715f>] warn_slowpath_null+0xf/0x20
  [<ffffffff8023fa05>] sub_preempt_count+0x95/0xa0
  [<ffffffffa04ce4db>] nilfs_btnode_prepare_change_key+0x11b/0x190 [nilfs2]
  [<ffffffffa04d01ad>] nilfs_btree_assign_p+0x19d/0x1e0 [nilfs2]
  [<ffffffffa04d10ad>] nilfs_btree_assign+0xbd/0x130 [nilfs2]
  [<ffffffffa04cead7>] nilfs_bmap_assign+0x47/0x70 [nilfs2]
  [<ffffffffa04d9bc6>] nilfs_segctor_do_construct+0x956/0x20f0 [nilfs2]
  [<ffffffff805ac8e2>] ? _spin_unlock_irqrestore+0x12/0x40
  [<ffffffff803c06e0>] ? __up_write+0xe0/0x150
  [<ffffffff80262959>] ? up_write+0x9/0x10
  [<ffffffffa04ce9f3>] ? nilfs_bmap_test_and_clear_dirty+0x43/0x60 [nilfs2]
  [<ffffffffa04cd627>] ? nilfs_mdt_fetch_dirty+0x27/0x60 [nilfs2]
  [<ffffffffa04db5fc>] nilfs_segctor_construct+0x8c/0xd0 [nilfs2]
  [<ffffffffa04dc3dc>] nilfs_segctor_thread+0x15c/0x3a0 [nilfs2]
  [<ffffffffa04dbe20>] ? nilfs_construction_timeout+0x0/0x10 [nilfs2]
  [<ffffffff80252633>] ? add_timer+0x13/0x20
  [<ffffffff802370da>] ? __wake_up_common+0x5a/0x90
  [<ffffffff8025e960>] ? autoremove_wake_function+0x0/0x40
  [<ffffffffa04dc280>] ? nilfs_segctor_thread+0x0/0x3a0 [nilfs2]
  [<ffffffffa04dc280>] ? nilfs_segctor_thread+0x0/0x3a0 [nilfs2]
  [<ffffffff8025e556>] kthread+0x56/0x90
  [<ffffffff8020cdea>] child_rip+0xa/0x20
  [<ffffffff8025e500>] ? kthread+0x0/0x90
  [<ffffffff8020cde0>] ? child_rip+0x0/0x20

This problem was caused due to a missing radix_tree_preload() call in
the retry path of nilfs_btnode_prepare_change_key() function.

Reported-by: Eric A <eric225125@yahoo.com>
Reported-by: Jerome Poulin <jeromepoulin@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Jerome Poulin <jeromepoulin@gmail.com>
Cc: stable@kernel.org
2009-08-31 12:03:06 +09:00
Ryusuke Konishi
a924586036 nilfs2: fix oopses with doubly mounted snapshots
will fix kernel oopses like the following:

 # mount -t nilfs2 -r -o cp=20 /dev/sdb1 /test1
 # mount -t nilfs2 -r -o cp=20 /dev/sdb1 /test2
 # umount /test1
 # umount /test2

BUG: sleeping function called from invalid context at arch/x86/mm/fault.c:1069
in_atomic(): 0, irqs_disabled(): 1, pid: 3886, name: umount.nilfs2
1 lock held by umount.nilfs2/3886:
 #0:  (&type->s_umount_key#31){+.+...}, at: [<c10b398a>] deactivate_super+0x52/0x6c
irq event stamp: 1219
hardirqs last  enabled at (1219): [<c135c774>] __mutex_unlock_slowpath+0xf8/0x119
hardirqs last disabled at (1218): [<c135c6d5>] __mutex_unlock_slowpath+0x59/0x119
softirqs last  enabled at (1214): [<c1033316>] __do_softirq+0x1a5/0x1ad
softirqs last disabled at (1205): [<c1033354>] do_softirq+0x36/0x5a
Pid: 3886, comm: umount.nilfs2 Not tainted 2.6.31-rc6 #55
Call Trace:
 [<c1023549>] __might_sleep+0x107/0x10e
 [<c13603c0>] do_page_fault+0x246/0x397
 [<c136017a>] ? do_page_fault+0x0/0x397
 [<c135e753>] error_code+0x6b/0x70
 [<c136017a>] ? do_page_fault+0x0/0x397
 [<c104f805>] ? __lock_acquire+0x91/0x12fd
 [<c1050a62>] ? __lock_acquire+0x12ee/0x12fd
 [<c1050a62>] ? __lock_acquire+0x12ee/0x12fd
 [<c1050b2b>] lock_acquire+0xba/0xdd
 [<d0d17d3f>] ? nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2]
 [<c135d4fe>] down_write+0x2a/0x46
 [<d0d17d3f>] ? nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2]
 [<d0d17d3f>] nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2]
 [<c104ea2c>] ? mark_held_locks+0x43/0x5b
 [<c104ecb1>] ? trace_hardirqs_on_caller+0x10b/0x133
 [<c104ece4>] ? trace_hardirqs_on+0xb/0xd
 [<d0d09ac1>] nilfs_put_super+0x2f/0xca [nilfs2]
 [<c10b3352>] generic_shutdown_super+0x49/0xb8
 [<c10b33de>] kill_block_super+0x1d/0x31
 [<c10e6599>] ? vfs_quota_off+0x0/0x12
 [<c10b398f>] deactivate_super+0x57/0x6c
 [<c10c4bc3>] mntput_no_expire+0x8c/0xb4
 [<c10c5094>] sys_umount+0x27f/0x2a4
 [<c10c50c6>] sys_oldumount+0xd/0xf
 [<c10031a4>] sysenter_do_call+0x12/0x38
 ...

This turns out to be a bug brought by an -rc1 patch ("nilfs2: simplify
remaining sget() use").

In the patch, a new "put resource" function, nilfs_put_sbinfo()
was introduced to delay freeing nilfs_sb_info struct.

But the nilfs_put_sbinfo() mistakenly used atomic_dec_and_test()
function to check the reference count, and it caused the nilfs_sb_info
was freed when user mounted a snapshot twice.

This bug also suggests there was unseen memory leak in usual mount
/umount operations for nilfs.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-08-19 02:10:13 +09:00
Zhang Qiang
1154ecbd2f nilfs2: missing a read lock for segment writer in nilfs_attach_checkpoint()
'ns_cno' of structure 'the_nilfs' must be protected from segment
writer, in other words, the caller of nilfs_get_checkpoint should hold
read lock for nilfs->ns_segctor_sem.  This patch adds the lock/unlock
operations in nilfs_attach_checkpoint() when calling
nilfs_cpfile_get_checkpoint().

Signed-off-by: Zhang Qiang <zhangqiang.buaa@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-08-18 17:32:27 +09:00
Ryusuke Konishi
01a261e09a nilfs2: fix missing unlock in error path of nilfs_mdt_write_page
This adds a missing unlock of nilfs->ns_writer_mutex in
nilfs_mdt_write_page() function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-08-02 22:24:15 +09:00
Ryusuke Konishi
a97778457f nilfs2: fix oops due to inconsistent state in page with discrete b-tree nodes
Andrea Gelmini gave me a report that a kernel oops hit on a nilfs
filesystem with a 1KB block size when doing rsync.

This turned out to be caused by an inconsistency of dirty state
between a page and its buffers storing b-tree node blocks.

If the page had multiple buffers split over multiple logs, and if the
logs were written at a time, a dirty flag remained in the page even
every dirty flag in the buffers was cleared.

This will fix the failure by dropping the dirty flag properly for
pages with the discrete multiple b-tree nodes.

Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: stable@kernel.org
2009-08-01 22:48:32 +09:00
Ryusuke Konishi
4fed598a49 fs/Kconfig: move nilfs2 out
fs/Kconfig file was split into individual fs/*/Kconfig files before
nilfs was merged.  I've found the current config entry of nilfs is
tainting the work.  Sorry, I didn't notice.  This fixes the violation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
2009-07-14 12:34:17 +09:00
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Jiro SEKIBA
d9a0a345ab nilfs2: fix disorder in cp count on error during deleting checkpoints
This fixes a bug that checkpoint count gets wrong on errors when
deleting a series of checkpoints.

The count error is persistent since the checkpoint count is stored on
disk.  Some userland programs refer to the count via ioctl, and this
bugfix is needed to prevent malfunction of such programs.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
2009-07-05 10:44:20 +09:00
Ryusuke Konishi
ff54de363a nilfs2: fix lockdep warning between regular file and inode file
This will fix the following false positive of recursive locking which
lockdep has detected:

=============================================
[ INFO: possible recursive locking detected ]
2.6.30-nilfs #42
---------------------------------------------
nilfs_cleanerd/10607 is trying to acquire lock:
 (&bmap->b_sem){++++-.}, at: [<e0d025b7>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2]

but task is already holding lock:
 (&bmap->b_sem){++++-.}, at: [<e0d024e0>] nilfs_bmap_truncate+0x19/0x6a [nilfs2]
other info that might help us debug this:
2 locks held by nilfs_cleanerd/10607:
 #0:  (&nilfs->ns_segctor_sem){++++.+}, at: [<e0d0d75a>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 #1:  (&bmap->b_sem){++++-.}, at: [<e0d024e0>] nilfs_bmap_truncate+0x19/0x6a [nilfs2]

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-07-05 10:44:20 +09:00
Ryusuke Konishi
4a52df7797 nilfs2: fix incorrect KERN_CRIT messages in case of write failures
In case of write-failure retries, the following KERN_CRIT level
messages are mistakenly output by nilfs_dat_commit_start() function:

nilfs_dat_commit_start: vbn = 408463, start = 12506, end = 18446744073709551615, pbn = 530210
nilfs_dat_commit_start: vbn = 408515, start = 12506, end = 18446744073709551615, pbn = 530211
nilfs_dat_commit_start: vbn = 408464, start = 12506, end = 18446744073709551615, pbn = 530212
...

This suppresses these messages.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
2009-07-05 10:44:20 +09:00
Ryusuke Konishi
8227b29722 nilfs2: fix hang problem of log writer which occurs after write failures
Leandro Lucarella gave me a report that nilfs gets stuck after its
write function fails.

The problem turned out to be caused by bugs which leave writeback flag
on pages.  This fixes the problem by ensuring to clear the writeback
flag in error path.

Reported-by: Leandro Lucarella <llucax@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
2009-07-05 10:44:20 +09:00
Ryusuke Konishi
0cfae3d879 nilfs2: remove unlikely directive causing mis-conversion of error code
The following error code handling in nilfs_segctor_write() function
wrongly converted negative error codes to a truth value (i.e. 1):

   err = unlikely(err) ? : res;

which originaly meant to be

   err = err ? : res;

This mis-conversion caused that write or sync functions receive the
unexpected error code.  This fixes the bug by removing the unlikely
directive.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
2009-07-05 10:44:19 +09:00
Al Viro
d441b1c293 switch nilfs2 to inode->i_acl
Actually, get rid of private analog, since nothing in there is
using ACLs at all so far.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:05 -04:00
Linus Torvalds
9c7cb99a82 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
  nilfs2: support contiguous lookup of blocks
  nilfs2: add sync_page method to page caches of meta data
  nilfs2: use device's backing_dev_info for btree node caches
  nilfs2: return EBUSY against delete request on snapshot
  nilfs2: modify list of unsupported features in caveats
  nilfs2: enable sync_page method
  nilfs2: set bio unplug flag for the last bio in segment
  nilfs2: allow future expansion of metadata read out via get info ioctl
  NILFS2: Pagecache usage optimization on NILFS2
  nilfs2: remove nilfs_btree_operations from btree mapping
  nilfs2: remove nilfs_direct_operations from direct mapping
  nilfs2: remove bmap pointer operations
  nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
  nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
  nilfs2: move get block functions in bmap.c into btree codes
  nilfs2: remove nilfs_bmap_delete_block
  nilfs2: remove nilfs_bmap_put_block
  nilfs2: remove header file for segment list operations
  nilfs2: eliminate removal list of segments
  nilfs2: add sufile function that can modify multiple segment usages
  ...
2009-06-15 09:13:49 -07:00
Ryusuke Konishi
aa7dfb8954 nilfs2: get rid of bd_mount_sem use from nilfs
This will remove every bd_mount_sem use in nilfs.

The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:18 -04:00
Ryusuke Konishi
e59399d010 nilfs2: correct exclusion control in nilfs_remount function
nilfs_remount() changes mount state of a superblock instance.  Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().

Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:

  1. bdev->bd_mount_sem
  2. sb->s_umount  (sget acquires)

and nilfs_remount() holds:

  1. sb->s_umount  (locked by the caller in vfs)
  2. bdev->bd_mount_sem

To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().

With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved.  And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:18 -04:00
Ryusuke Konishi
6dd4740662 nilfs2: simplify remaining sget() use
This simplifies the test function passed on the remaining sget()
callsite in nilfs.

Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:18 -04:00
Ryusuke Konishi
3f82ff5516 nilfs2: get rid of sget use for checking if current mount is present
This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device.  This elimination uses a back pointer to the
current mount added to nilfs object.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:17 -04:00
Ryusuke Konishi
33c8e57c86 nilfs2: get rid of sget use for acquiring nilfs object
This will change the way to obtain nilfs object in nilfs_get_sb()
function.

Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.

This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:17 -04:00
Ryusuke Konishi
81fc20bd0e nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
The following EBUSY case in nilfs_get_sb() is meaningless.  Indeed,
this error code is never returned to the caller.

    if (!s->s_root) {
          ...
    } else if (!(s->s_flags & MS_RDONLY)) {
        err = -EBUSY;
    }

This simply removes the else case.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:17 -04:00
Christoph Hellwig
d731e06323 nilfs2: call nilfs2_write_super from nilfs2_sync_fs
The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:17 -04:00
Alessio Igor Bogani
337eb00a2c Push BKL down into ->remount_fs()
[xfs, btrfs, capifs, shmem don't need BKL, exempt]

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:11 -04:00
Christoph Hellwig
6cfd014842 push BKL down into ->put_super
Move BKL into ->put_super from the only caller.  A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment.  Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.

[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:07 -04:00
Christoph Hellwig
8c85e12512 remove ->write_super call in generic_shutdown_super
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.

Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.

Exceptions:

 - affs already has identical copy & pasted code at the beginning of
   affs_put_super so no need to do it twice.
 - xfs does the right thing without it and I have changes pending for
   the xfs tree touching this are so I don't really need conflicts
   here..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:06 -04:00
Linus Torvalds
c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Ryusuke Konishi
c3a7abf06c nilfs2: support contiguous lookup of blocks
Although get_block() callback function can return extent of contiguous
blocks with bh->b_size, nilfs_get_block() function did not support
this feature.

This adds contiguous lookup feature to the block mapping codes of
nilfs, and allows the nilfs_get_blocks() function to return the extent
information by applying the feature.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:12 +09:00
Ryusuke Konishi
fa032744ad nilfs2: add sync_page method to page caches of meta data
This applies block_sync_page() function to the sync_page method of
page caches for meta data files, gc page caches, and btree node
buffers.  This is a companion patch of ("nilfs2: enable sync_page
mothod") which applied the function for data pages.

This allows lock_page() for those meta data to unplug pending bio
requests.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:12 +09:00
Ryusuke Konishi
a53b4751ae nilfs2: use device's backing_dev_info for btree node caches
Previously, default_backing_dev_info was used for the mapping of btree
node caches.  This uses device dependent backing_dev_info to allow
detailed control of the device for the btree node pages.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:12 +09:00
Ryusuke Konishi
30c25be71f nilfs2: return EBUSY against delete request on snapshot
This helps userland programs like the rmcp command to distinguish
error codes returned against a checkpoint removal request.

Previously -EPERM was returned, and not discriminable from real
permission errors.  This also allows removal of the latest checkpoint
because the deletion leads to create a new checkpoint, and thus it's
harmless for the filesystem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:12 +09:00
Ryusuke Konishi
e85dc1d529 nilfs2: enable sync_page method
This adds a missing sync_page method which unplugs bio requests when
waiting for page locks. This will improve read performance of nilfs.

Here is a measurement result using dd command.

Without this patch:

 # mount -t nilfs2 /dev/sde1 /test
 # dd if=/test/aaa of=/dev/null bs=512k
 1024+0 records in
 1024+0 records out
 536870912 bytes (537 MB) copied, 6.00688 seconds, 89.4 MB/s

With this patch:

 # mount -t nilfs2 /dev/sde1 /test
 # dd if=/test/aaa of=/dev/null bs=512k
 1024+0 records in
 1024+0 records out
 536870912 bytes (537 MB) copied, 3.54998 seconds, 151 MB/s

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
30bda0b8ae nilfs2: set bio unplug flag for the last bio in segment
This sets BIO_RW_UNPLUG flag on the last bio of each segment during
write.  The last bio should be unplugged immediately because the
caller waits for the completion after the submission.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
003ff182fd nilfs2: allow future expansion of metadata read out via get info ioctl
Nilfs has some ioctl commands to read out metadata from meta data
files:

 - NILFS_IOCTL_GET_CPINFO for checkpoint file,
 - NILFS_IOCTL_GET_SUINFO for segment usage file, and
 - NILFS_IOCTL_GET_VINFO for Disk Address Transalation (DAT) file,
   respectively.

Every routine on these metadata files is implemented so that it allows
future expansion of on-disk format.  But, the above ioctl commands do
not support expansion even though nilfs_argv structure can handle
arbitrary size for data exchanged via ioctl.

This allows future expansion of the following structures which give
basic format of the "get information" ioctls:

 - struct nilfs_cpinfo
 - struct nilfs_suinfo
 - struct nilfs_vinfo

So, this introduces forward compatility of such ioctl commands.

In this patch, a sanity check in nilfs_ioctl_get_info() function is
changed to accept larger data structure [1], and metadata read
routines are rewritten so that they become compatible for larger
structures; the routines will just ignore the remaining fields which
the current version of nilfs doesn't know.

[1] The ioctl function already has another upper limit (PAGE_SIZE
    against a structure, which appears in nilfs_ioctl_wrap_copy
    function), and this will not cause security problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Hisashi Hifumi
258ef67e24 NILFS2: Pagecache usage optimization on NILFS2
Hi,

I introduced "is_partially_uptodate" aops for NILFS2.

A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.

I did a performance test using the sysbench.

1 --file-block-size=8K --file-total-size=2G --file-test-mode=rndrw --file-fsync-freq=0 --fil
e-rw-ratio=1 run

-2.6.30-rc5

Test execution summary:
    total time:                          151.2907s
    total number of events:              200000
    total time taken by event execution: 2409.8387
    per-request statistics:
         min:                            0.0000s
         avg:                            0.0120s
         max:                            0.9306s
         approx.  95 percentile:         0.0439s

Threads fairness:
    events (avg/stddev):           12500.0000/238.52
    execution time (avg/stddev):   150.6149/0.01

-2.6.30-rc5-patched

Test execution summary:
    total time:                          140.8828s
    total number of events:              200000
    total time taken by event execution: 2240.8577
    per-request statistics:
         min:                            0.0000s
         avg:                            0.0112s
         max:                            0.8750s
         approx.  95 percentile:         0.0418s

Threads fairness:
    events (avg/stddev):           12500.0000/218.43
    execution time (avg/stddev):   140.0536/0.01

arch: ia64
pagesize: 16k

Thanks.

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
7cde31d7d6 nilfs2: remove nilfs_btree_operations from btree mapping
will remove indirect function calls using nilfs_btree_operations
table.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
355c6b6103 nilfs2: remove nilfs_direct_operations from direct mapping
will remove indirect function calls using nilfs_direct_operations
table.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
d4b961576d nilfs2: remove bmap pointer operations
Previously, the bmap codes of nilfs used three types of function
tables.  The abuse of indirect function calls decreased source
readability and suffered many indirect jumps which would confuse
branch prediction of processors.

This eliminates one type of the function tables,
nilfs_bmap_ptr_operations, which was used to dispatch low level
pointer operations of the nilfs bmap.

This adds a new integer variable "b_ptr_type" to nilfs_bmap struct,
and uses the value to select the pointer operations.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi
3033342a0b nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
This will cut off 16 bytes from the nilfs_bmap struct which is
embedded in the on-memory inode of nilfs.

The b_high field was never used, and the b_low field stores a constant
value which can be determined by whether the inode uses btree for
block mapping or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi
e473c1f265 nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
This indirect function is set to NULL only for gc cache inodes, but
the gc cache inodes never call this function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi
f198dbb9cf nilfs2: move get block functions in bmap.c into btree codes
Two get block function for btree nodes, nilfs_bmap_get_block() and
nilfs_bmap_get_new_block(), are called only from the btree codes.
This relocation will increase opportunities of compiler optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi
9f098900ad nilfs2: remove nilfs_bmap_delete_block
nilfs_bmap_delete_block() is a wrapper function calling
nilfs_btnode_delete().  This removes it for simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi
087d01b425 nilfs2: remove nilfs_bmap_put_block
nilfs_bmap_put_block() is a wrapper function calling brelse().  This
eliminates the wrapper for simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi
654137dd46 nilfs2: remove header file for segment list operations
This will eliminate obsolete list operations of nilfs_segment_entry
structure which has been used to handle mutiple segment numbers.

The patch ("nilfs2: remove list of freeing segments") removed use of
the structure from the segment constructor code, and this patch
simplifies the remaining code by integrating it into recovery.c.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
071cb4b819 nilfs2: eliminate removal list of segments
This will clean up the removal list of segments and the related
functions from segment.c and ioctl.c, which have hurt code
readability.

This elimination is applied by using nilfs_sufile_updatev() previously
introduced in the patch ("nilfs2: add sufile function that can modify
multiple segment usages").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
dda54f4b87 nilfs2: add sufile function that can modify multiple segment usages
This is a preparation for the later cleanup patch ("nilfs2: remove
list of freeing segments").

This adds nilfs_sufile_updatev() to sufile, which can modify multiple
segment usages at a time.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
d97a51a7e3 nilfs2: unify bmap operations starting use of indirect block address
This simplifies some low level functions of bmap.

Three bmap pointer operations, nilfs_bmap_start_v(),
nilfs_bmap_commit_v(), and nilfs_bmap_abort_v(), are unified into one
nilfs_bmap_start_v() function. And the related indirect function calls
are replaced with it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
6582207064 nilfs2: remove nilfs_dat_prepare_free function
This function is unused.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
62013ab5d5 nilfs2: fix bh leak in nilfs_cpfile_delete_checkpoints function
The nilfs_cpfile_delete_checkpoints() wrongly skips brelse() for the
header block of checkpoint file in case of errors.  This fixes the
leak bug.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-30 22:07:50 +09:00
Martin K. Petersen
e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Ryusuke Konishi
d504685363 nilfs2: fix memory leak in nilfs_ioctl_clean_segments
This fixes a new memory leak problem in garbage collection.  The
problem was brought by the bugfix patch ("nilfs2: fix lock order
reversal in nilfs_clean_segments ioctl").

Thanks to Kentaro Suzuki for finding this problem.

Reported-by: Kentaro Suzuki <k_suzuki@ms.sylc.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-22 20:49:04 +09:00
Ryusuke Konishi
83aca8f480 nilfs2: check size of array structured data exchanged via ioctls
Although some ioctls of nilfs2 exchange data in the form of indirectly
referenced array, some of them lack size check on the array elements.

This inserts the missing checks and rejects requests if data of ioctl
does not have a valid format.

We usually don't have to check size of structures that we associated
with ioctl commands because the size is tested implicitly for
identifying ioctl command; the checks this patch adds are for the
cases where the implicit check is not applied.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-12 01:48:54 +09:00
Ryusuke Konishi
4f6b828837 nilfs2: fix lock order reversal in nilfs_clean_segments ioctl
This is a companion patch to ("nilfs2: fix possible circular locking
for get information ioctls").

This corrects lock order reversal between mm->mmap_sem and
nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by
lockdep check:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00003-g360bdc1 #7
 -------------------------------------------------------
 mmap/5294 is trying to acquire lock:
  (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
        [<c01470a5>] __lock_acquire+0x1066/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c01836bc>] might_fault+0x68/0x88
        [<c023c61d>] copy_from_user+0x2a/0x111
        [<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2]
        [<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2]
        [<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2]
        [<c01a3be7>] vfs_ioctl+0x22/0x69
        [<c01a408e>] do_vfs_ioctl+0x460/0x499
        [<c01a4107>] sys_ioctl+0x40/0x5a
        [<c01031a4>] sysenter_do_call+0x12/0x38
        [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
        [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c0433f1d>] down_read+0x2a/0x3e
        [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
        [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
        [<c0183b0b>] __do_fault+0x165/0x376
        [<c01855cd>] handle_mm_fault+0x287/0x5d1
        [<c043712d>] do_page_fault+0x2fb/0x30a
        [<c0435462>] error_code+0x72/0x78
        [<ffffffff>] 0xffffffff

where nilfs_clean_segments() holds:

  nilfs->ns_segctor_sem -> copy_from_user()
                             --> page fault -> mm->mmap_sem

And, page fault path may hold:

  page fault -> mm->mmap_sem
         --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem

Even though nilfs_clean_segments() does not perform write access on
given user pages, it may cause deadlock because nilfs->ns_segctor_sem
is shared per device and mm->mmap_sem can be shared with other tasks.

To avoid this problem, this patch moves all calls of copy_from_user()
outside the nilfs->ns_segctor_sem lock in the ioctl.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-11 14:54:41 +09:00
Ryusuke Konishi
47eb6b9c8f nilfs2: fix possible circular locking for get information ioctls
This is one of two patches which are to correct possible circular
locking between mm->mmap_sem and nilfs->ns_segctor_sem.

The problem was detected by lockdep check as follows:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00002-g3552613 #6
 -------------------------------------------------------
 mmap/5418 is trying to acquire lock:
 (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
 (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
 [<c01470a5>] __lock_acquire+0x1066/0x13b0
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<c01836bc>] might_fault+0x68/0x88
 [<c023c730>] copy_to_user+0x2c/0xfc
 [<d0d11b4f>] nilfs_ioctl_wrap_copy+0x103/0x160 [nilfs2]
 [<d0d11fa9>] nilfs_ioctl+0x30a/0x3b0 [nilfs2]
 [<c01a3be7>] vfs_ioctl+0x22/0x69
 [<c01a408e>] do_vfs_ioctl+0x460/0x499
 [<c01a4107>] sys_ioctl+0x40/0x5a
 [<c01031a4>] sysenter_do_call+0x12/0x38
 [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<c0433f1d>] down_read+0x2a/0x3e
 [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
 [<c0183b0b>] __do_fault+0x165/0x376
 [<c01855cd>] handle_mm_fault+0x287/0x5d1
 [<c043712d>] do_page_fault+0x2fb/0x30a
 [<c0435462>] error_code+0x72/0x78
 [<ffffffff>] 0xffffffff

 other info that might help us debug this:

 1 lock held by mmap/5418:
 #0:  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 stack backtrace:
 Pid: 5418, comm: mmap Not tainted 2.6.30-rc3-nilfs-00002-g3552613 #6
 Call Trace:
 [<c0432145>] ? printk+0xf/0x12
 [<c0145c48>] print_circular_bug_tail+0xaa/0xb5
 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
 [<d0d10149>] ? nilfs_sufile_get_stat+0x1e/0x105 [nilfs2]
 [<c013b59a>] ? up_read+0x16/0x2c
 [<d0d10225>] ? nilfs_sufile_get_stat+0xfa/0x105 [nilfs2]
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<c0433f1d>] down_read+0x2a/0x3e
 [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
 [<c0183b0b>] __do_fault+0x165/0x376
 [<c01855cd>] handle_mm_fault+0x287/0x5d1
 [<c043700a>] ? do_page_fault+0x1d8/0x30a
 [<c013b54f>] ? down_read_trylock+0x39/0x43
 [<c043712d>] do_page_fault+0x2fb/0x30a
 [<c0436e32>] ? do_page_fault+0x0/0x30a
 [<c0435462>] error_code+0x72/0x78
 [<c0436e32>] ? do_page_fault+0x0/0x30a

This makes the lock granularity of nilfs->ns_segctor_sem finer than
that of the mmap semaphore for ioctl commands except
nilfs_clean_segments().

The successive patch ("nilfs2: fix lock order reversal in
nilfs_clean_segments ioctl") is required to fully resolve the problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-11 12:57:46 +09:00
Ryusuke Konishi
843382370e nilfs2: ensure to clear dirty state when deleting metadata file block
This would fix the following failure during GC:

 nilfs_cpfile_delete_checkpoints: cannot delete block
 NILFS: GC failed during preparation: cannot delete checkpoints: err=-2

The problem was caused by a break in state consistency between page
cache and btree; the above block was removed from the btree but the
page buffering the block was remaining in the page cache in dirty
state.

This resolves the inconsistency by ensuring to clear dirty state of
the page buffering the deleted block.

Reported-by: David Arendt <admin@prnet.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-10 17:04:42 +09:00
Ryusuke Konishi
201913ed74 nilfs2: fix circular locking dependency of writer mutex
This fixes the following circular locking dependency problem:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3 #5
 -------------------------------------------------------
 segctord/3895 is trying to acquire lock:
  (&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>]
   nilfs_mdt_get_block+0x89/0x20f [nilfs2]

 but task is already holding lock:
  (&bmap->b_sem){++++..}, at: [<d0d02d99>]
   nilfs_bmap_propagate+0x14/0x2e [nilfs2]

 which lock already depends on the new lock.

The bugfix is done by replacing call sites of nilfs_get_writer() which
are never called from read-only context with direct dereferencing of
pointer to a writable FS-instance.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-09 13:36:57 +09:00
Ryusuke Konishi
85c2a74fab nilfs2: fix possible recovery failure due to block creation without writer
Some function calls in nilfs_prepare_segment_for_recovery() may fail
because they can create blocks on meta data files without configuring
a writable FS-instance.  Concretely, nilfs_mdt_create_block() routine
of meta data files will fail in that case.

This fixes the problem by temporarily attaching a writable FS-instace
during the function is called.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-09 13:36:56 +09:00
Ryusuke Konishi
c85399c2da nilfs2: fix possible mismatch of sufile counters on recovery
On-disk counters ndirtysegs and ncleansegs of sufile, can go wrong
after roll-forward recovery because
nilfs_prepare_segment_for_recovery() function marks segments dirty
without adjusting value of these counters.

This fixes the problem by adding a function to sufile which does the
operation adjusting the counters, and by letting the recovery function
use it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-13 09:53:52 +09:00
Ryusuke Konishi
a703018f7b nilfs2: segment usage file cleanups
This will simplify sufile.c by sharing common code which repeatedly
appears in routines updating a segment usage entry; a wrapper function
nilfs_sufile_update() is introduced for the purpose, and counter
modifications are integrated to a new function
nilfs_sufile_mod_counter().

This is a preparation for the successive bugfix patch ("nilfs2: fix
possible mismatch of sufile counters on recovery").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-13 09:53:51 +09:00