Commit Graph

133 Commits

Author SHA1 Message Date
Mike Christie
dfec8a14fc fs: have ll_rw_block users pass in op and flags separately
This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Christoph Hellwig
c8b8e32d70 direct-io: eliminate the offset argument to ->direct_IO
Including blkdev_direct_IO and dax_do_io.  It has to be ki_pos to actually
work, so eliminate the superflous argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Kirill A. Shutemov
09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Al Viro
5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Linus Torvalds
1d3671df72 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes and quota cleanups from Jan Kara:
 "Several UDF fixes and some minor quota cleanups"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Check output buffer length when converting name to CS0
  udf: Prevent buffer overrun with multi-byte characters
  quota: constify qtree_fmt_operations structures
  udf: avoid uninitialized variable use
  udf: Fix lost indirect extent block
  udf: Factor out code for creating indirect extent
  udf: limit the maximum number of indirect extents in a row
  udf: limit the maximum number of TD redirections
  fs: make quota/dquot.c explicitly non-modular
  fs: make quota/netlink.c explicitly non-modular
2016-01-15 11:51:51 -08:00
Arnd Bergmann
4f1b1519f7 udf: avoid uninitialized variable use
A new warning has come up from a recent cleanup:

fs/udf/inode.c: In function 'udf_setup_indirect_aext':
fs/udf/inode.c:1927:28: warning: 'adsize' may be used uninitialized in this function [-Wmaybe-uninitialized]

If the alloc_type is neither ICBTAG_FLAG_AD_SHORT nor
ICBTAG_FLAG_AD_LONG, the value of adsize is undefined. Currently,
callers of these functions make sure alloc_type is one of the two valid
ones but for future proofing make sure we handle the case of invalid
alloc type as well.  This changes the code to return -EIOin that case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fcea62babc ("udf: Factor out code for creating indirect extent")
Signed-off-by: Jan Kara <jack@suse.cz>
2016-01-04 10:53:29 +01:00
Jan Kara
6c37157874 udf: Fix lost indirect extent block
When inode ends with empty indirect extent block and we extended that
file, udf_do_extend_file() ended up just overwriting pointer to it with
another extent and thus effectively leaking the block and also
corruptiong length of allocation descriptors.

Fix the problem by properly following into next indirect extent when it
is present.

Signed-off-by: Jan Kara <jack@suse.cz>
2015-12-23 18:05:03 +01:00
Jan Kara
fcea62babc udf: Factor out code for creating indirect extent
Factor out code for creating indirect extent from udf_add_aext(). It was
mostly duplicated in two places. Also remove some opencoded versions
of udf_write_aext().

Signed-off-by: Jan Kara <jack@suse.cz>
2015-12-23 18:04:52 +01:00
Vegard Nossum
b0918d9f47 udf: limit the maximum number of indirect extents in a row
udf_next_aext() just follows extent pointers while extents are marked as
indirect. This can loop forever for corrupted filesystem. Limit number
the of indirect extents we are willing to follow in a row.

[JK: Updated changelog, limit, style]

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: stable@vger.kernel.org
Cc: Jan Kara <jack@suse.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-12-23 11:47:55 +01:00
Al Viro
21fc61c73c don't put symlink bodies in pagecache into highmem
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.

new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases.  page_follow_link_light()
instrumented to yell about anything missed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08 22:41:36 -05:00
Al Viro
c73119c58f udf: don't duplicate page_symlink_inode_operations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 20:43:26 -05:00
Steven J. Magnani
70f19f5869 udf: Don't corrupt unalloc spacetable when writing it
For a UDF filesystem configured with an Unallocated Space Table,
a filesystem operation that triggers an update to the table results
in on-disk corruption that prevents remounting:

  udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 274

For example:
  1. Create a filesystem
      $ mkudffs --media-type=hd --blocksize=512 --lvid=BUGTEST \
              --vid=BUGTEST --fsid=BUGTEST --space=unalloctable \
              /dev/mmcblk0

  2. Mount it
      # mount /dev/mmcblk0 /mnt

  3. Create a file
      $ echo "No corruption, please" > /mnt/new.file

  4. Umount
      # umount /mnt

  5. Attempt remount
      # mount /dev/mmcblk0 /mnt

This appears to be a longstanding bug caused by zero-initialization of
the Unallocated Space Entry block buffer and only partial repopulation
of required fields before writing to disk.

Commit 0adfb339fd64 ("udf: Fix unalloc space handling in udf_update_inode")
addressed one such field, but several others are required.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.com>
2015-07-09 16:38:57 +02:00
Linus Torvalds
4fc8adcfec Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull third hunk of vfs changes from Al Viro:
 "This contains the ->direct_IO() changes from Omar + saner
  generic_write_checks() + dealing with fcntl()/{read,write}() races
  (mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of
  repeatedly looking at ->f_flags, which can be changed by fcntl(2),
  check ->ki_flags - which cannot) + infrastructure bits for dhowells'
  d_inode annotations + Christophs switch of /dev/loop to
  vfs_iter_write()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits)
  block: loop: switch to VFS ITER_BVEC
  configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode
  VFS: Make pathwalk use d_is_reg() rather than S_ISREG()
  VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
  VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk
  NFS: Don't use d_inode as a variable name
  VFS: Impose ordering on accesses of d_inode and d_flags
  VFS: Add owner-filesystem positive/negative dentry checks
  nfs: generic_write_checks() shouldn't be done on swapout...
  ocfs2: use __generic_file_write_iter()
  mirror O_APPEND and O_DIRECT into iocb->ki_flags
  switch generic_write_checks() to iocb and iter
  ocfs2: move generic_write_checks() before the alignment checks
  ocfs2_file_write_iter: stop messing with ppos
  udf_file_write_iter: reorder and simplify
  fuse: ->direct_IO() doesn't need generic_write_checks()
  ext4_file_write_iter: move generic_write_checks() up
  xfs_file_aio_write_checks: switch to iocb/iov_iter
  generic_write_checks(): drop isblk argument
  blkdev_write_iter: expand generic_file_checks() call in there
  ...
2015-04-16 23:27:56 -04:00
Linus Torvalds
84588e7a5d Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and udf updates from Jan Kara:
 "The pull contains quota changes which complete unification of XFS and
  VFS quota interfaces (so tools can use either interface to manipulate
  any filesystem).  There's also a patch to support project quotas in
  VFS quota subsystem from Li Xi.

  Finally there's a bunch of UDF fixes and cleanups and tiny cleanup in
  reiserfs & ext3"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
  udf: Update ctime and mtime when directory is modified
  udf: return correct errno for udf_update_inode()
  ext3: Remove useless condition in if statement.
  vfs: Add general support to enforce project quota limits
  reiserfs: fix __RASSERT format string
  udf: use int for allocated blocks instead of sector_t
  udf: remove redundant buffer_head.h includes
  udf: remove else after return in __load_block_bitmap()
  udf: remove unused variable in udf_table_free_blocks()
  quota: Fix maximum quota limit settings
  quota: reorder flags in quota state
  quota: paranoia: check quota tree root
  quota: optimize i_dquot access
  quota: Hook up Q_XSETQLIM for id 0 to ->set_info
  xfs: Add support for Q_SETINFO
  quota: Make ->set_info use structure with neccesary info to VFS and XFS
  quota: Remove ->get_xstate and ->get_xstatev callbacks
  gfs2: Convert to using ->get_state callback
  xfs: Convert to using ->get_state callback
  quota: Wire up Q_GETXSTATE and Q_GETXSTATV calls to work with ->get_state
  ...
2015-04-16 22:19:33 -04:00
Omar Sandoval
22c6186ece direct_IO: remove rw from a_ops->direct_IO()
Now that no one is using rw, remove it completely.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:45 -04:00
Omar Sandoval
6f67376318 direct_IO: use iov_iter_rw() instead of rw everywhere
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:45 -04:00
Omar Sandoval
17f8c842d2 Remove rw from {,__,do_}blockdev_direct_IO()
Most filesystems call through to these at some point, so we'll start
here.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:44 -04:00
Changwoo Min
0fd2ba36b8 udf: return correct errno for udf_update_inode()
Instead of -ENOMEM, properly return -EIO udf_update_inode()
error, similar/consistent to the rest of filesystems.

Signed-off-by: Changwoo Min <changwoo.m@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-04-01 12:46:46 +02:00
Christoph Hellwig
e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Fabian Frederick
13f0c2b0f6 udf: remove redundant buffer_head.h includes
buffer_head.h was already included in udfdecl.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14 07:54:02 +01:00
Fabian Frederick
6981498d79 udf: remove bool assignment to 0/1
Fix the following coccinelle warnings:

fs/udf/inode.c:753:2-13: WARNING: Assignment of bool to 0/1
fs/udf/inode.c:795:2-13: WARNING: Assignment of bool to 0/1

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-02-05 16:34:25 +01:00
Jan Kara
23b133bdc4 udf: Check length of extended attributes and allocation descriptors
Check length of extended attributes and allocation descriptors when
loading inodes from disk. Otherwise corrupted filesystems could confuse
the code and make the kernel oops.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-07 13:51:58 +01:00
Jan Kara
7914495427 udf: Remove repeated loads blocksize
Store blocksize in a local variable in udf_fill_inode() since it is used
a lot of times.

Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-07 13:46:16 +01:00
Jan Kara
e159332b9a udf: Verify i_size when loading inode
Verify that inode size is sane when loading inode with data stored in
ICB. Otherwise we may get confused later when working with the inode and
inode size is too big.

CC: stable@vger.kernel.org
Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-19 13:13:05 +01:00
Jan Kara
6174c2eb8e udf: Fix loading of special inodes
Some UDF media have special inodes (like VAT or metadata partition
inodes) whose link_count is 0. Thus commit 4071b91362 (udf: Properly
detect stale inodes) broke loading these inodes because udf_iget()
started returning -ESTALE for them. Since we still need to properly
detect stale inodes queried by NFS, create two variants of udf_iget() -
one which is used for looking up special inodes (which ignores
link_count == 0) and one which is used for other cases which return
ESTALE when link_count == 0.

Fixes: 4071b91362
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-09 13:06:14 +02:00
Jan Kara
470cca56c3 udf: Set i_generation field
Currently UDF doesn't initialize i_generation in any way and thus NFS
can easily get reallocated inodes from stale file handles. Luckily UDF
already has a unique object identifier associated with each inode -
i_unique. Use that for initialization of i_generation.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 21:37:40 +02:00
Jan Kara
4071b91362 udf: Properly detect stale inodes
NFS can easily ask for inodes that are already deleted. Currently UDF
happily returns such inodes which is a bug. Return -ESTALE if
udf_read_inode() is asked to read deleted inode.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 21:37:39 +02:00
Jan Kara
6d3d5e860a udf: Make udf_read_inode() and udf_iget() return error
Currently __udf_read_inode() wasn't returning anything and we found out
whether we succeeded reading inode by checking whether inode is bad or
not. udf_iget() returned NULL on failure and inode pointer otherwise.
Make these two functions properly propagate errors up the call stack and
use the return value in callers.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 21:36:35 +02:00
Jan Kara
c03aa9f6e1 udf: Avoid infinite loop when processing indirect ICBs
We did not implement any bound on number of indirect ICBs we follow when
loading inode. Thus corrupted medium could cause kernel to go into an
infinite loop, possibly causing a stack overflow.

Fix the possible stack overflow by removing recursion from
__udf_read_inode() and limit number of indirect ICBs we follow to avoid
infinite loops.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 14:12:29 +02:00
Jan Kara
bb7720a0b4 udf: Fold udf_fill_inode() into __udf_read_inode()
There's no good reason to separate these since udf_fill_inode() is
called only from __udf_read_inode() and both do part of the same thing.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 13:32:50 +02:00
Jan Kara
8a70ee3307 udf: Avoid dir link count to go negative
If we are writing back inode of unlinked directory, its link count ends
up being (u16)-1. Although the inode is deleted, udf_iget() can load the
inode when NFS uses stale file handle and get confused.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 11:47:51 +02:00
Al Viro
31b140398c switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:46 -04:00
Al Viro
a6cbcd4a4a get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro
d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Johannes Weiner
91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Jan Kara
09ebb17ab4 udf: Fix data corruption on file type conversion
UDF has two types of files - files with data stored in inode (ICB in
UDF terminology) and files with data stored in external data blocks. We
convert file from in-inode format to external format in
udf_file_aio_write() when we find out data won't fit into inode any
longer. However the following race between two O_APPEND writes can happen:

CPU1					CPU2
udf_file_aio_write()			udf_file_aio_write()
  down_write(&iinfo->i_data_sem);
  checks that i_size + count1 fits within inode
    => no need to convert
  up_write(&iinfo->i_data_sem);
					  down_write(&iinfo->i_data_sem);
					  checks that i_size + count2 fits
					    within inode => no need to convert
					  up_write(&iinfo->i_data_sem);
  generic_file_aio_write()
    - extends file by count1 bytes
					  generic_file_aio_write()
					    - extends file by count2 bytes

Clearly if count1 + count2 doesn't fit into the inode, we overwrite
kernel buffers beyond inode, possibly corrupting the filesystem as well.

Fix the problem by acquiring i_mutex before checking whether write fits
into the inode and using __generic_file_aio_write() afterwards which
puts check and write into one critical section.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-02-20 21:56:00 +01:00
Kirill A. Shutemov
7caef26767 truncate: drop 'oldsize' truncate_pagecache() parameter
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression").  Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:02 -07:00
Kent Overstreet
a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Namjae Jeon
99600051b0 udf: add extent cache support in case of file reading
This patch implements extent caching in case of file reading.
While reading a file, currently, UDF reads metadata serially
which takes a lot of time depending on the number of extents present
in the file. Caching last accessd extent improves metadata read time.
Instead of reading file metadata from start, now we read from
the cached extent.

This patch considerably improves the time spent by CPU in kernel mode.
For example, while reading a 10.9 GB file using dd:
Time before applying patch:
11677022208 bytes (10.9GB) copied, 1529.748921 seconds, 7.3MB/s
real    25m 29.85s
user    0m 12.41s
sys     15m 34.75s

Time after applying patch:
11677022208 bytes (10.9GB) copied, 1469.338231 seconds, 7.6MB/s
real    24m 29.44s
user    0m 15.73s
sys     3m 27.61s

[JK: Fix bh refcounting issues, simplify initialization]

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Bonggil Bak <bgbak@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2013-01-22 10:48:31 +01:00
Namjae Jeon
6d31d15f21 udf: remove un-needed variable from inode_getblk
The variable last_block is not needed.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13 16:33:23 +01:00
Namjae Jeon
fb719c59bd udf: don't increment lenExtents while writing to a hole
Incrementing lenExtents even while writing to a hole is bad
for performance as calls to udf_discard_prealloc and
udf_truncate_tail_extent would not return from start if
isize != lenExtents

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13 16:33:23 +01:00
Namjae Jeon
2fb7d99d0d udf: fix memory leak while allocating blocks during write
Need to brelse the buffer_head stored in cur_epos and next_epos.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13 16:33:23 +01:00
Linus Torvalds
e1cc485262 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext3 & udf fixes from Jan Kara:
 "Shortlog pretty much says it all.

  The interesting bits are UDF support for direct IO and ext3 fix for a
  long standing oops in data=journal mode."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  jbd: Fix assertion failure in commit code due to lacking transaction credits
  UDF: Add support for O_DIRECT
  ext3: Replace 0 with NULL for pointer in super.c file
  udf: add writepages support for udf
  ext3: don't clear orphan list on ro mount with errors
  reiserfs: Make reiserfs_xattr_handlers static
2012-10-04 09:14:01 -07:00
Linus Torvalds
437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Eric W. Biederman
c2ba138a27 userns: Convert the udf filesystem to use kuid/kgid where appropriate
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21 04:18:54 -07:00
Ian Abbott
5eec54fcde UDF: Add support for O_DIRECT
Add support for the O_DIRECT flag.  There are two cases to deal with:

1. Small files stored in the ICB (inode control block?): just return 0
from the new udf_adinicb_direct_IO() handler to fall back to buffered
I/O.

2. Larger files, not stored in the ICB: nothing special here.  Just call
blockdev_direct_IO() from our new udf_direct_IO() handler and tidy up
any blocks instantiated outside i_size on error.  This is pretty
standard.  Factor error handling code out of udf_write_begin() into new
function udf_write_failed() so it can also be called by udf_direct_IO().

Also change the whitespace in udf_aops to make it a bit neater.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-09-06 16:20:39 +02:00
Namjae Jeon
378b8e1ad1 udf: add writepages support for udf
Use mpage_writepages() instead of multiple calls to udf_writepage()
to make performance higher.

*Write Speed with writepage() =
 RecSize     ReadSpeed    WriteSpeed  RanReadSpeed RanWriteSpeed
10485760    0.00MB/sec    8.56MB/sec    0.00MB/sec    8.20MB/sec
 1048576    0.00MB/sec    8.57MB/sec    0.00MB/sec    6.42MB/sec
  524288    0.00MB/sec    8.59MB/sec    0.00MB/sec    5.24MB/sec
  262144    0.00MB/sec    8.59MB/sec    0.00MB/sec    4.17MB/sec
  131072    0.00MB/sec    8.53MB/sec    0.00MB/sec    3.32MB/sec
   65536    0.00MB/sec    8.49MB/sec    0.00MB/sec    2.31MB/sec

*Write Speed with writepages()
RecSize     ReadSpeed    WriteSpeed  RanReadSpeed RanWriteSpeed
10485760    0.00MB/sec    9.88MB/sec    0.00MB/sec    9.60MB/sec
 1048576    0.00MB/sec    9.95MB/sec    0.00MB/sec    7.52MB/sec
  524288    0.00MB/sec    9.98MB/sec    0.00MB/sec    6.16MB/sec
  262144    0.00MB/sec    9.90MB/sec    0.00MB/sec    4.98MB/sec
  131072    0.00MB/sec    9.89MB/sec    0.00MB/sec    3.78MB/sec
   65536    0.00MB/sec    9.81MB/sec    0.00MB/sec    2.50MB/sec

There is about 1.4MB/sec speed improvement over 8.5MB/sec,
which comes out around 16% improvement.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-09-04 00:06:26 +02:00
Ian Abbott
bb2b6d19ec udf: fix udf_setsize() for file data in ICB
If the new size is larger than the old size and the old file data was
stored in the ICB (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) and the
new size still fits in the ICB, skip the call to udf_extend_file() as it
does not handle this i_alloc_type value (it calls BUG()).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-08-15 00:21:58 +02:00
Ashish Sangwan
a0e589b485 UDF: Remove unnecessary variable "offset" from udf_fill_inode
The variable "offset" is not needed. Remove it.

Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-09 12:03:12 +02:00
Jan Kara
dbd5768f87 vfs: Rename end_writeback() to clear_inode()
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00