* commit 'v3.3-rc1': (9775 commits)
Linux 3.3-rc1
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
qnx4: don't leak ->BitMap on late failure exits
qnx4: reduce the insane nesting in qnx4_checkroot()
qnx4: di_fname is an array, for crying out loud...
KEYS: Permit key_serial() to be called with a const key pointer
keys: fix user_defined key sparse messages
ima: fix cred sparse warning
uml: fix compile for x86-64
MPILIB: Add a missing ENOMEM check
tpm: fix (ACPI S3) suspend regression
nvme: fix merge error due to change of 'make_request_fn' fn type
xen: using EXPORT_SYMBOL requires including export.h
gpio: tps65910: Use correct offset for gpio initialization
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
tg3: Fix single-vector MSI-X code
openvswitch: Fix multipart datapath dumps.
ipv6: fix per device IP snmp counters
...
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
gma500: Fix suspend/resume functions
drm/exynos: fixed pm feature for fimd module.
MAINTAINERS: added maintainer entry for Exynos DRM Driver.
drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD
drm/exynos: fix build dependency for DRM_EXYNOS_HDMI
drm/exynos: use release_mem_region instead of release_resource
agp: fix scratch page cleanup
drm/i915: fixup forcewake spinlock fallout in drpc debugfs function
drm/i915: debugfs: show semaphore registers also on gen7
drm/i915: allow userspace forcewake references also on gen7
drm/i915: Re-enable gen7 RC6 and GPU turbo after resume.
drm/i915: Correct debugfs printout for RC1e.
Revert "drm/i915: Work around gen7 BLT ring synchronization issues."
drm/i915: rip out the HWSTAM missed irq workaround
drm/i915: paper over missed irq issues with force wake voodoo
drm/i915: Hold gt_lock across forcewake register reads
drm/i915: Hold gt_lock during reset
drm/i915: Move reset forcewake processing to gen6_do_reset
drm/i915: protect force_wake_(get|put) with the gt_lock
drm/i915: convert force_wake_get to func pointer in the gpu reset code
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix silent output on Haier W18 laptop
ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID
ALSA: hda - Fix silent output on ASUS A6Rp
ALSA: Fix memory leak on error in snd_compr_set_params()
ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support
Josef fixed btrfs_page_mkwrite to properly release reserved
extents if there was an error. But if we fail to get a reservation
and we fail to dirty the inode (for ENOSPC reasons), we'll end up
trying to release a reservation we never had.
This makes sure we only release if we were able to reserve.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Both the suspend and resume functions incorrectly set psbfb =
to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix
this by moving the assignment of psbfb inside the loop and removing the
initialisation of fb.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Let the watchdog core to check the valid value range of min_timeout/max_timeout.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Correct typo "unexpectdly" to "unexpectedly" in pnx4008_wdt.c
and stmp3xxx_wdt.c
Signed-off-by: Masanari Iida<standby24x7@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command,
call wafwdt_stop() to disable watchdog.
Call wafwdt_start() while receiving WDIOS_ENABLECARD option.
Current code has reverse behavior.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command,
call wm8350_wdt_stop() to disable watchdog.
Call wm8350_wdt_start() while receiving WDIOS_ENABLECARD option.
Current code has reverse behavior.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
It is only used in this driver, so no need to make the symbol global.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
It is only used in this driver, so no need to make the symbol global.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marc Vertes <marc.vertes@sigfox.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Currently the watchdog driver calls the pm_runtime_enable and never
the disable. This may cause a warning when pm_runtime_enable
checks for the count match.
Also fixes the error
/build/watchdog # insmod omap_wdt.ko
[ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable!
[ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
/build/watchdog #
Attempting to fix the same by calling pm_runtime_disable.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.
The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@nm@
expression myname;
identifier i;
@@
struct platform_driver i = { .driver = { .name = myname } };
@@
expression dev,res,size;
expression nm.myname;
@@
-if (!devm_request_mem_region(dev, res->start, size,
- \(res->name\|dev_name(dev)\|myname\))) {
- ...
- return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
when != res->start
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.
The variable res_size is then no longer needed.
The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@nm@
expression myname;
identifier i;
@@
struct platform_driver i = { .driver = { .name = myname } };
@@
expression dev,res,size;
expression nm.myname;
@@
-if (!devm_request_mem_region(dev, res->start, size,
- \(res->name\|dev_name(dev)\|myname\))) {
- ...
- return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
when != res->start
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball
mach-ux500: enable ARM errata 764369
mach-ux500: do not override outer.inv_all
mach-ux500: musb: now musb is always in OTG mode
this patch separates fimd specific power on/off function from pm function
and the pm interfaces will call that function for power on or off.
and also removes unnecessary codes of resume function.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
David no longer has access to MAX1688 hardware, so drop him from the maintainers
list.
Cc: David George <dgeorgester@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: David George <dgeorgester@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
The actual driver code seems to have been lost in the shuffle.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
I'd like to add my colleagues who dedicated to developing and
improving our driver to maintainer entry.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
FB based FIMD and DRM based FIMD drivers use same hardware
so with this patch, only one of them would be selected.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
DRM_EXYNOS_HDMI driver and VIDEO_SAMSUNG_S5P_TV driver should be
not enabled at once because they use same HW blocks. So dependency
for DRM_EXYNOS_HDMI is fixed to check VIDEO_SAMSUNG_S5P_TV=n.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
To make a api pair of request_mem_region and release_mem_region,
release_mem_region is used instead of release_resource.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Commit 36a1211970 removed linux/module.h
include statement from one of the headers that end up in net/sock.h.
It was providing us with static_branch() definition implicitly, so
after its removal the build got broken.
To fix this, and avoid having this happening in the future,
let me do the right thing and include linux/jump_label.h
explicitly in sock.h.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting link parameters on a netdevice changes the value
of if_nlmsg_size(), therefore it is necessary to recalculate
min_ifinfo_dump_size.
Signed-off-by: Stefan Gula <steweg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tunnel devices set NETIF_F_LLTX to bypass HARD_TX_LOCK. Sit and
ipip set this unconditionally in ops->setup, but gre enables it
conditionally after parameter passing in ops->newlink. This is
not called during tunnel setup as below, however, so GRE tunnels are
still taking the lock.
modprobe ip_gre
ip tunnel add test0 mode gre remote 10.5.1.1 dev lo
ip link set test0 up
ip addr add 10.6.0.1 dev test0
# cat /sys/class/net/test0/features
# $DIR/test_tunnel_xmit 10 10.5.2.1
ip route add 10.5.2.0/24 dev test0
ip tunnel del test0
The newlink callback is only called in rtnl_netlink, and only if
the device is new, as it calls register_netdevice internally. Gre
tunnels are created at 'ip tunnel add' with ioctl SIOCADDTUNNEL,
which calls ipgre_tunnel_locate, which calls register_netdev.
rtnl_newlink is called at 'ip link set', but skips ops->newlink
and the device is up with locking still enabled. The equivalent
ipip tunnel works fine, btw (just substitute 'method gre' for
'method ipip').
On kernels before /sys/class/net/*/features was removed [1],
the first commented out line returns 0x6000 with method gre,
which indicates that NETIF_F_LLTX (0x1000) is not set. With ipip,
it reports 0x7000. This test cannot be used on recent kernels where
the sysfs file is removed (and ETHTOOL_GFEATURES does not currently
work for tunnel devices, because they lack dev->ethtool_ops).
The second commented out line calls a simple transmission test [2]
that sends on 24 cores at maximum rate. Results of a single run:
ipip: 19,372,306
gre before patch: 4,839,753
gre after patch: 19,133,873
This patch replicates the condition check in ipgre_newlink to
ipgre_tunnel_locate. It works for me, both with oseq on and off.
This is the first time I looked at rtnetlink and iproute2 code,
though, so someone more knowledgeable should probably check the
patch. Thanks.
The tail of both functions is now identical, by the way. To avoid
code duplication, I'll be happy to rework this and merge the two.
[1] http://patchwork.ozlabs.org/patch/104610/
[2] http://kernel.googlecode.com/files/xmit_udp_parallel.c
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode_amd: Add support for CPU family specific container files
x86/amd: Add missing feature flag for fam15h models 10h-1fh processors
x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf()
x86/numachip: Drop unnecessary conflict with EDAC
x86/uv: Fix uninitialized spinlocks
x86/uv: Fix uv_gpa_to_soc_phys_ram() shift
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix assembler constraint to prevent overeager gcc optimisation
mac_esp: rename irq
mac_scsi: dont enable mac_scsi irq before requesting it
macfb: fix black and white modes
m68k/irq: Remove obsolete IRQ_FLG_* definitions
Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
If we span a long area in a bitmap we could end up taking a lot of time
searching to the next free area if we're searching from the original
window_start, so advance window_start in order to make sure we don't do any
superficial searching. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btree_releasepage is a callback and can be passed unknown gfp flags and then
they may end up in kmem_cache_alloc called from alloc_extent_state, slab
allocator will BUG_ON when there is HIGHMEM or DMA32 flag set.
This may happen when btrfs is mounted from a loop device, which masks out
__GFP_IO flag. The check in try_release_extent_state
3399 if ((mask & GFP_NOFS) == GFP_NOFS)
3400 mask = GFP_NOFS;
will not work and passes unfiltered flags further resulting in crash at
mm/slab.c:2963
[<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8
[<000000000024c810>] kmem_cache_alloc+0x204/0x294
[<00000000001fd3c2>] mempool_alloc+0x52/0x170
[<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs]
[<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs]
[<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs]
[<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs]
[<0000000000210d84>] shrink_page_list+0x6a0/0x724
[<0000000000211394>] shrink_inactive_list+0x230/0x578
[<0000000000211bb8>] shrink_list+0x6c/0x120
[<0000000000211e4e>] shrink_zone+0x1e2/0x228
[<0000000000211f24>] shrink_zones+0x90/0x254
[<0000000000213410>] do_try_to_free_pages+0xac/0x420
[<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0
[<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8
[<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we did sysbench test for inline files, enospc error happened easily though
there was lots of free disk space which could be allocated for new chunks.
Reproduce steps:
# mkfs.btrfs -b $((2 * 1024 * 1024 * 1024)) <test partition>
# mount <test partition> /mnt
# ulimit -n 102400
# cd /mnt
# sysbench --num-threads=1 --test=fileio --file-num=81920 \
> --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
> --file-test-mode=seqwr prepare
# sysbench --num-threads=1 --test=fileio --file-num=81920 \
> --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
> --file-test-mode=seqwr run
<soon later, BUG_ON() was triggered by enospc error>
The reason of this bug is:
Now, we can reserve space which is larger than the free space in the chunks if
we have enough free disk space which can be used for new chunks. By this way,
the space allocator should allocate a new chunk by force if there is no free
space in the free space cache. But there are two wrong checks which break this
operation.
One is
if (ret == -ENOSPC && num_bytes > min_alloc_size)
in btrfs_reserve_extent(), it is wrong, we should try to allocate a new chunk
even we fail to allocate free space by minimum allocable size.
The other is
if (space_info->force_alloc)
force = space_info->force_alloc;
in do_chunk_alloc(). It makes the allocator ignore CHUNK_ALLOC_FORCE If someone
sets ->force_alloc to CHUNK_ALLOC_LIMITED, and makes the enospc error happen.
Fix these two wrong checks. Especially the second one, we fix it by changing
the value of CHUNK_ALLOC_LIMITED and CHUNK_ALLOC_FORCE, and make
CHUNK_ALLOC_FORCE greater than CHUNK_ALLOC_LIMITED since CHUNK_ALLOC_FORCE has
higher priority. And if the value which is passed in by the caller is greater
than ->force_alloc, use the passed value.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
xfstests 218 complains that btrfs defrags a file partially:
After: 1
Write backwards sync, but contiguous - should defrag to 1 extent
Before: 10
-After: 1
+After: 2
To fix this, we need to set max_to_defrag count properly.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There have been 4 warnings on 32-bit build, they are herewith fixed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We specifically set window_start in the cluster struct to indicate where the
cluster starts in a bitmap, but we've been using min_start to indicate where
we're searching from. This is usually the start of the blockgroup, so
essentially means we're constantly searching from the start of any bitmap we
find, which completely negates all the trouble we go to in order to setup a
cluster. So start using window_start to make sure we actually use the area we
found. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
A user has encountered a NULL pointer kernel oops in btrfs when
encountering media errors. The problem has been identified
as an unhandled NULL pointer returned from find_get_page().
This modification simply checks for a NULL page, and returns
with an error if found (the extent_range_uptodate() function
returns 1 on errors).
After testing this patch, the user reported that the error with
the NULL pointer oops was solved. However, there is still a
remaining problem with a thread becoming stuck in
wait_on_page_locked(page) in the read_extent_buffer_pages(...)
function in extent_io.c
for (i = start_i; i < num_pages; i++) {
page = extent_buffer_page(eb, i);
wait_on_page_locked(page);
if (!PageUptodate(page))
ret = -EIO;
}
This patch leaves the issue with the locked page yet to be resolved.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
wait_log_commit() and wait_for_writer() were using slightly different
conditions for deciding whether they should call schedule() and whether they
should continue in the wait loop. Thus it could happen that we busylooped when
the first condition was not true while the second one was. That is burning CPU
cycles needlessly and is deadly on UP machines...
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We have only been checking for min_bytes available in bitmap entries, but we
won't successfully setup a bitmap cluster unless it has at least bytes in the
bitmap, so in the common case min_bytes is 4k and we want something like 2MB, so
if there are a bunch of bitmap entries with less than 2mb's in them, we'll
search all them anyway, which is suboptimal. Fix this check. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Added initialization with the declaration of ret. It isn't set later on the
switch-default branch (which should never be taken).
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Fix UWB/WUSB kconfig error by changing 'select' to 'depends on'.
drivers/usb/wusbcore/Kconfig:4:error: recursive dependency detected!
drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD
drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB
drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
