The first RCU-based object iteration loop has to modify the object count.
So we cannot skip taking the object lock.
One way to avoid soft lockup is to insert occasional cond_resched() call
into the loop. This cannot be done while holding the RCU read lock which
is to protect objects from being freed. However, taking a reference to
the object will prevent it from being freed. We can then do a
cond_resched() call after every 64k objects safely.
Link: https://lkml.kernel.org/r/20220614220359.59282-4-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are 3 RCU-based object iteration loops in kmemleak_scan(). Because
of the need to take RCU read lock, we can't insert cond_resched() into the
loop like other parts of the function. As there can be millions of
objects to be scanned, it takes a while to iterate all of them. The
kmemleak functionality is usually enabled in a debug kernel which is much
slower than a non-debug kernel. With sufficient number of kmemleak
objects, the time to iterate them all may exceed 22s causing soft lockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kmemleak:625]
In this particular bug report, the soft lockup happen in the 2nd iteration
loop.
In the 2nd and 3rd loops, most of the objects are checked and then skipped
under the object lock. Only a selected fews are modified. Those objects
certainly need lock protection. However, the lock/unlock operation is
slow especially with interrupt disabling and enabling included.
We can actually do some basic check like color_white() without taking the
lock and skip the object accordingly. Of course, this kind of check is
racy and may miss objects that are being modified concurrently. The cost
of missed objects, however, is just that they will be discovered in the
next scan instead. The advantage of doing so is that iteration can be
done much faster especially with LOCKDEP enabled in a debug kernel.
With a debug kernel running on a 2-socket 96-thread x86-64 system
(HZ=1000), the 2nd and 3rd iteration loops speedup with this patch on the
first kmemleak_scan() call after bootup is shown in the table below.
Before patch After patch
Loop # # of objects Elapsed time # of objects Elapsed time
------ ------------ ------------ ------------ ------------
2 2,599,850 2.392s 2,596,364 0.266s
3 2,600,176 2.171s 2,597,061 0.260s
This patch reduces loop iteration times by about 88%. This will greatly
reduce the chance of a soft lockup happening in the 2nd or 3rd iteration
loops.
Even though the first loop runs a little bit faster, it can still be
problematic if many kmemleak objects are there. As the object count has
to be modified in every object, we cannot avoid taking the object lock.
So other way to prevent soft lockup will be needed.
Link: https://lkml.kernel.org/r/20220614220359.59282-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/kmemleak: Avoid soft lockup in kmemleak_scan()", v2.
There are 3 RCU-based object iteration loops in kmemleak_scan(). Because
of the need to take RCU read lock, we can't insert cond_resched() into the
loop like other parts of the function. As there can be millions of
objects to be scanned, it takes a while to iterate all of them. The
kmemleak functionality is usually enabled in a debug kernel which is much
slower than a non-debug kernel. With sufficient number of kmemleak
objects, the time to iterate them all may exceed 22s causing soft lockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kmemleak:625]
This patch series make changes to the 3 object iteration loops in
kmemleak_scan() to prevent them from causing soft lockup.
This patch (of 3):
kmemleak_scan() is called only from the kmemleak scan thread or from write
to the kmemleak debugfs file. Both are in task context and so we can
directly use the simpler _irq() lock/unlock calls instead of the more
complex _irqsave/_irqrestore variants.
Similarly, kmemleak_clear() is called only from write to the kmemleak
debugfs file. The same change can be applied.
Link: https://lkml.kernel.org/r/20220614220359.59282-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20220614220359.59282-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Check the physical address of objects for its boundary when scan instead
of in kmemleak_*_phys().
Link: https://lkml.kernel.org/r/20220611035551.1823303-5-patrick.wang.shcn@gmail.com
Fixes: 23c2d497de ("mm: kmemleak: take a full lowmem check in kmemleak_*_phys()")
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add object_phys_tree_root to store the objects allocated with physical
address. Distinguish it from object_tree_root by OBJECT_PHYS flag or
function argument. The physical address is stored directly in those
objects.
Link: https://lkml.kernel.org/r/20220611035551.1823303-4-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add OBJECT_PHYS flag for object. This flag is used to identify the
objects allocated with physical address. The create_object_phys()
function is added as well to set that flag and is used by
kmemleak_alloc_phys().
Link: https://lkml.kernel.org/r/20220611035551.1823303-3-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we use HW-tag based kasan and enable vmalloc support, we hit the
following bug. It is due to comparison between tagged object and
non-tagged pointer.
We need to reset the kasan tag when we need to compare tagged object and
non-tagged pointer.
kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440
CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1
Hardware name: MT6983(ENG) (DT)
Call trace:
add_scan_area+0xc4/0x244
kmemleak_scan_area+0x40/0x9c
layout_and_allocate+0x1e8/0x288
load_module+0x2c8/0xf00
__se_sys_finit_module+0x190/0x1d0
__arm64_sys_finit_module+0x20/0x30
invoke_syscall+0x60/0x170
el0_svc_common+0xc8/0x114
do_el0_svc+0x28/0xa0
el0_svc+0x60/0xf8
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768):
kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197
kmemleak: [name:kmemleak&] min_count = 0
kmemleak: [name:kmemleak&] count = 0
kmemleak: [name:kmemleak&] flags = 0x1
kmemleak: [name:kmemleak&] checksum = 0
kmemleak: [name:kmemleak&] backtrace:
module_alloc+0x9c/0x120
move_module+0x34/0x19c
layout_and_allocate+0x1c4/0x288
load_module+0x2c8/0xf00
__se_sys_finit_module+0x190/0x1d0
__arm64_sys_finit_module+0x20/0x30
invoke_syscall+0x60/0x170
el0_svc_common+0xc8/0x114
do_el0_svc+0x28/0xa0
el0_svc+0x60/0xf8
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using devm_request_free_mem_region() and devm_memremap_pages() to
add ZONE_DEVICE memory, if requested free mem region's end pfn were
huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see
move_pfn_range_to_zone()). Thus it creates a huge hole between
node_start_pfn() and node_end_pfn().
We found on some AMD APUs, amdkfd requested such a free mem region and
created a huge hole. In such a case, following code snippet was just
doing busy test_bit() looping on the huge hole.
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
struct page *page = pfn_to_online_page(pfn);
if (!page)
continue;
...
}
So we got a soft lockup:
watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
RIP: 0010:pfn_to_online_page+0x5/0xd0
Call Trace:
? kmemleak_scan+0x16a/0x440
kmemleak_write+0x306/0x3a0
? common_file_perm+0x72/0x170
full_proxy_write+0x5c/0x90
vfs_write+0xb9/0x260
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
I did some tests with the patch.
(1) amdgpu module unloaded
before the patch:
real 0m0.976s
user 0m0.000s
sys 0m0.968s
after the patch:
real 0m0.981s
user 0m0.000s
sys 0m0.973s
(2) amdgpu module loaded
before the patch:
real 0m35.365s
user 0m0.000s
sys 0m35.354s
after the patch:
real 0m1.049s
user 0m0.000s
sys 0m1.042s
Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With HW tag-based kasan enable, We will get the warning when we free
object whose address starts with 0xFF.
It is because kmemleak rbtree stores tagged object and this freeing
object's tag does not match with rbtree object.
In the example below, kmemleak rbtree stores the tagged object in the
kmalloc(), and kfree() gets the pointer with 0xFF tag.
Call sequence:
ptr = kmalloc(size, GFP_KERNEL);
page = virt_to_page(ptr);
offset = offset_in_page(ptr);
kfree(page_address(page) + offset);
ptr = kmalloc(size, GFP_KERNEL);
A sequence like that may cause the warning as following:
1) Freeing unknown object:
In kfree(), we will get free unknown object warning in
kmemleak_free(). Because object(0xFx) in kmemleak rbtree and
pointer(0xFF) in kfree() have different tag.
2) Overlap existing:
When we allocate that object with the same hw-tag again, we will
find the overlap in the kmemleak rbtree and kmemleak thread will be
killed.
kmemleak: Freeing unknown object at 0xffff000003f88000
CPU: 5 PID: 177 Comm: cat Not tainted 5.16.0-rc1-dirty #21
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1ac
show_stack+0x1c/0x30
dump_stack_lvl+0x68/0x84
dump_stack+0x1c/0x38
kmemleak_free+0x6c/0x70
slab_free_freelist_hook+0x104/0x200
kmem_cache_free+0xa8/0x3d4
test_version_show+0x270/0x3a0
module_attr_show+0x28/0x40
sysfs_kf_seq_show+0xb0/0x130
kernfs_seq_show+0x30/0x40
seq_read_iter+0x1bc/0x4b0
seq_read_iter+0x1bc/0x4b0
kernfs_fop_read_iter+0x144/0x1c0
generic_file_splice_read+0xd0/0x184
do_splice_to+0x90/0xe0
splice_direct_to_actor+0xb8/0x250
do_splice_direct+0x88/0xd4
do_sendfile+0x2b0/0x344
__arm64_sys_sendfile64+0x164/0x16c
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x74/0x90
el0_svc+0x20/0x80
el0t_64_sync_handler+0x1a8/0x1b0
el0t_64_sync+0x1ac/0x1b0
...
kmemleak: Cannot insert 0xf2ff000003f88000 into the object search tree (overlaps existing)
CPU: 5 PID: 178 Comm: cat Not tainted 5.16.0-rc1-dirty #21
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1ac
show_stack+0x1c/0x30
dump_stack_lvl+0x68/0x84
dump_stack+0x1c/0x38
create_object.isra.0+0x2d8/0x2fc
kmemleak_alloc+0x34/0x40
kmem_cache_alloc+0x23c/0x2f0
test_version_show+0x1fc/0x3a0
module_attr_show+0x28/0x40
sysfs_kf_seq_show+0xb0/0x130
kernfs_seq_show+0x30/0x40
seq_read_iter+0x1bc/0x4b0
kernfs_fop_read_iter+0x144/0x1c0
generic_file_splice_read+0xd0/0x184
do_splice_to+0x90/0xe0
splice_direct_to_actor+0xb8/0x250
do_splice_direct+0x88/0xd4
do_sendfile+0x2b0/0x344
__arm64_sys_sendfile64+0x164/0x16c
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x74/0x90
el0_svc+0x20/0x80
el0t_64_sync_handler+0x1a8/0x1b0
el0t_64_sync+0x1ac/0x1b0
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xf2ff000003f88000 (size 128):
kmemleak: comm "cat", pid 177, jiffies 4294921177
kmemleak: min_count = 1
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
kmem_cache_alloc+0x23c/0x2f0
test_version_show+0x1fc/0x3a0
module_attr_show+0x28/0x40
sysfs_kf_seq_show+0xb0/0x130
kernfs_seq_show+0x30/0x40
seq_read_iter+0x1bc/0x4b0
kernfs_fop_read_iter+0x144/0x1c0
generic_file_splice_read+0xd0/0x184
do_splice_to+0x90/0xe0
splice_direct_to_actor+0xb8/0x250
do_splice_direct+0x88/0xd4
do_sendfile+0x2b0/0x344
__arm64_sys_sendfile64+0x164/0x16c
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x74/0x90
kmemleak: Automatic memory scanning thread ended
[akpm@linux-foundation.org: whitespace tweak]
Link: https://lkml.kernel.org/r/20211118054426.4123-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In a memory pressure situation, I'm seeing the lockdep WARNING below.
Actually, this is similar to a known false positive which is already
addressed by commit 6dcde60efd ("xfs: more lockdep whackamole with
kmem_alloc*").
This warning still persists because it's not from kmalloc() itself but
from an allocation for kmemleak object. While kmalloc() itself suppress
the warning with __GFP_NOLOCKDEP, gfp_kmemleak_mask() is dropping the
flag for the kmemleak's allocation.
Allow __GFP_NOLOCKDEP to be passed to kmemleak's allocation, so that the
warning for it is also suppressed.
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc7-BTRFS-ZNS+ #37 Not tainted
------------------------------------------------------
kswapd0/288 is trying to acquire lock:
ffff88825ab45df0 (&xfs_nondir_ilock_class){++++}-{3:3}, at: xfs_ilock+0x8a/0x250
but task is already holding lock:
ffffffff848cc1e0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x112/0x160
kmem_cache_alloc+0x48/0x400
create_object.isra.0+0x42/0xb10
kmemleak_alloc+0x48/0x80
__kmalloc+0x228/0x440
kmem_alloc+0xd3/0x2b0
kmem_alloc_large+0x5a/0x1c0
xfs_attr_copy_value+0x112/0x190
xfs_attr_shortform_getvalue+0x1fc/0x300
xfs_attr_get_ilocked+0x125/0x170
xfs_attr_get+0x329/0x450
xfs_get_acl+0x18d/0x430
get_acl.part.0+0xb6/0x1e0
posix_acl_xattr_get+0x13a/0x230
vfs_getxattr+0x21d/0x270
getxattr+0x126/0x310
__x64_sys_fgetxattr+0x1a6/0x2a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&xfs_nondir_ilock_class){++++}-{3:3}:
__lock_acquire+0x2c0f/0x5a00
lock_acquire+0x1a1/0x4b0
down_read_nested+0x50/0x90
xfs_ilock+0x8a/0x250
xfs_can_free_eofblocks+0x34f/0x570
xfs_inactive+0x411/0x520
xfs_fs_destroy_inode+0x2c8/0x710
destroy_inode+0xc5/0x1a0
evict+0x444/0x620
dispose_list+0xfe/0x1c0
prune_icache_sb+0xdc/0x160
super_cache_scan+0x31e/0x510
do_shrink_slab+0x337/0x8e0
shrink_slab+0x362/0x5c0
shrink_node+0x7a7/0x1a40
balance_pgdat+0x64e/0xfe0
kswapd+0x590/0xa80
kthread+0x38c/0x460
ret_from_fork+0x22/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
*** DEADLOCK ***
3 locks held by kswapd0/288:
#0: ffffffff848cc1e0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffff848a08d8 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x269/0x5c0
#2: ffff8881a7a820e8 (&type->s_umount_key#60){++++}-{3:3}, at: super_cache_scan+0x5a/0x510
Link: https://lkml.kernel.org/r/20210907055659.3182992-1-naohiro.aota@wdc.com
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the obsolete and ambiguos macro in_irq() with new macro
in_hardirq().
Link: https://lkml.kernel.org/r/20210813145245.86070-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [kmemleak]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan, slub: reset tag when printing address", v3.
With hardware tag-based kasan enabled, we reset the tag when we access
metadata to avoid from false alarm.
This patch (of 2):
Kmemleak needs to scan kernel memory to check memory leak. With hardware
tag-based kasan enabled, when it scans on the invalid slab and
dereference, the issue will occur as below.
Hardware tag-based KASAN doesn't use compiler instrumentation, we can not
use kasan_disable_current() to ignore tag check.
Based on the below report, there are 11 0xf7 granules, which amounts to
176 bytes, and the object is allocated from the kmalloc-256 cache. So
when kmemleak accesses the last 256-176 bytes, it causes faults, as those
are marked with KASAN_KMALLOC_REDZONE == KASAN_TAG_INVALID == 0xfe.
Thus, we reset tags before accessing metadata to avoid from false positives.
BUG: KASAN: out-of-bounds in scan_block+0x58/0x170
Read at addr f7ff0000c0074eb0 by task kmemleak/138
Pointer tag: [f7], memory tag: [fe]
CPU: 7 PID: 138 Comm: kmemleak Not tainted 5.14.0-rc2-00001-g8cae8cd89f05-dirty #134
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x1c/0x30
dump_stack_lvl+0x68/0x84
print_address_description+0x7c/0x2b4
kasan_report+0x138/0x38c
__do_kernel_fault+0x190/0x1c4
do_tag_check_fault+0x78/0x90
do_mem_abort+0x44/0xb4
el1_abort+0x40/0x60
el1h_64_sync_handler+0xb4/0xd0
el1h_64_sync+0x78/0x7c
scan_block+0x58/0x170
scan_gray_list+0xdc/0x1a0
kmemleak_scan+0x2ac/0x560
kmemleak_scan_thread+0xb0/0xe0
kthread+0x154/0x160
ret_from_fork+0x10/0x18
Allocated by task 0:
kasan_save_stack+0x2c/0x60
__kasan_kmalloc+0xec/0x104
__kmalloc+0x224/0x3c4
__register_sysctl_paths+0x200/0x290
register_sysctl_table+0x2c/0x40
sysctl_init+0x20/0x34
proc_sys_init+0x3c/0x48
proc_root_init+0x80/0x9c
start_kernel+0x648/0x6a4
__primary_switched+0xc0/0xc8
Freed by task 0:
kasan_save_stack+0x2c/0x60
kasan_set_track+0x2c/0x40
kasan_set_free_info+0x44/0x54
____kasan_slab_free.constprop.0+0x150/0x1b0
__kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0xa4/0x1fc
kfree+0x1e8/0x30c
put_fs_context+0x124/0x220
vfs_kern_mount.part.0+0x60/0xd4
kern_mount+0x24/0x4c
bdev_cache_init+0x70/0x9c
vfs_caches_init+0xdc/0xf4
start_kernel+0x638/0x6a4
__primary_switched+0xc0/0xc8
The buggy address belongs to the object at ffff0000c0074e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 176 bytes inside of
256-byte region [ffff0000c0074e00, ffff0000c0074f00)
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x100074
head:(____ptrval____) order:2 compound_mapcount:0 compound_pincount:0
flags: 0xbfffc0000010200(slab|head|node=0|zone=2|lastcpupid=0xffff|kasantag=0x0)
raw: 0bfffc0000010200 0000000000000000 dead000000000122 f5ff0000c0002300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0000c0074c00: f0 f0 f0 f0 f0 f0 f0 f0 f0 fe fe fe fe fe fe fe
ffff0000c0074d00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
>ffff0000c0074e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 fe fe fe fe fe
^
ffff0000c0074f00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffff0000c0075000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
kmemleak: 181 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
Link: https://lkml.kernel.org/r/20210804090957.12393-1-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20210804090957.12393-2-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit contains 3 modifications:
1. Convert the type of jiffies_scan_wait to "unsigned long".
2. Use READ/WRITE_ONCE() for accessing "jiffies_scan_wait".
3. Fix the possible wrong memory scanning period. If you set a large
memory scanning period like blow, then the "secs" variable will be
non-zero, however the value of "jiffies_scan_wait" will be zero.
echo "scan=0x10000000" > /sys/kernel/debug/kmemleak
It is because the type of the msecs_to_jiffies()'s parameter is "unsigned
int", and the "secs * 1000" is larger than its max value. This in turn
leads a unexpected jiffies_scan_wait, maybe zero. We corret it by
replacing kstrtoul() with kstrtouint(), and check the msecs to prevent it
larger than UINT_MAX.
Link: https://lkml.kernel.org/r/20210613174022.23044-1-yanfei.xu@windriver.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object. Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".
The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.
For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().
Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak_scan() currently relies on the big tasklist_lock hammer to
stabilize iterating through the tasklist. Instead, this patch proposes
simply using rcu along with the rcu-safe for_each_process_thread flavor
(without changing scan semantics), which doesn't make use of
next_thread/p->thread_group and thus cannot race with exit. Furthermore,
any races with fork() and not seeing the new child should be benign as
it's not running yet and can also be detected by the next scan.
Avoiding the tasklist_lock could prove beneficial for performance
considering the scan operation is done periodically. I have seen
improvements of 30%-ish when doing similar replacements on very
pathological microbenchmarks (ie stressing get/setpriority(2)).
However my main motivation is that it's one less user of the global
lock, something that Linus has long time wanted to see gone eventually
(if ever) even if the traditional fairness issues has been dealt with
now with qrwlocks. Of course this is a very long ways ahead. This
patch also kills another user of the deprecated tsk->thread_group.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20200820203902.11308-1-dave@stgolabs.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even if KCSAN is disabled for kmemleak, update_checksum() could still call
crc32() (which is outside of kmemleak.c) to dereference object->pointer.
Thus, the value of object->pointer could be accessed concurrently as
noticed by KCSAN,
BUG: KCSAN: data-race in crc32_le_base / do_raw_spin_lock
write to 0xffffb0ea683a7d50 of 4 bytes by task 23575 on cpu 12:
do_raw_spin_lock+0x114/0x200
debug_spin_lock_after at kernel/locking/spinlock_debug.c:91
(inlined by) do_raw_spin_lock at kernel/locking/spinlock_debug.c:115
_raw_spin_lock+0x40/0x50
__handle_mm_fault+0xa9e/0xd00
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
read to 0xffffb0ea683a7d50 of 4 bytes by task 839 on cpu 60:
crc32_le_base+0x67/0x350
crc32_le_base+0x67/0x350:
crc32_body at lib/crc32.c:106
(inlined by) crc32_le_generic at lib/crc32.c:179
(inlined by) crc32_le at lib/crc32.c:197
kmemleak_scan+0x528/0xd90
update_checksum at mm/kmemleak.c:1172
(inlined by) kmemleak_scan at mm/kmemleak.c:1497
kmemleak_scan_thread+0xcc/0xfa
kthread+0x1e0/0x200
ret_from_fork+0x27/0x50
If a shattered value was returned due to a data race, it will be corrected
in the next scan. Thus, let KCSAN ignore all reads in the region to
silence KCSAN in case the write side is non-atomic.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/20200317182754.2180-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang warns:
mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare]
if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
^
mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare]
if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
These are not true arrays, they are linker defined symbols, which are just
addresses. Using the address of operator silences the warning and does
not change the resulting assembly with either clang/ld.lld or gcc/ld
(tested with diff + objdump -Dr).
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/895
Link: http://lkml.kernel.org/r/20200220051551.44000-1-natechancellor@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak_lock as a rwlock on RT can possibly be acquired in atomic
context which does work.
Since the kmemleak operation is performed in atomic context make it a
raw_spinlock_t so it can also be acquired on RT. This is used for
debugging and is not enabled by default in a production like environment
(where performance/latency matters) so it makes sense to make it a
raw_spinlock_t instead trying to get rid of the atomic context. Turn
also the kmemleak_object->lock into raw_spinlock_t which is acquired
(nested) while the kmemleak_lock is held.
The time spent in "echo scan > kmemleak" slightly improved on 64core box
with this patch applied after boot.
[bigeasy@linutronix.de: redo the description, update comments. Merge the individual bits: He Zhe did the kmemleak_lock, Liu Haitao the ->lock and Yongxin Liu forwarded Liu's patch.]
Link: http://lkml.kernel.org/r/20191219170834.4tah3prf2gdothz4@linutronix.de
Link: https://lkml.kernel.org/r/20181218150744.GB20197@arrakis.emea.arm.com
Link: https://lkml.kernel.org/r/1542877459-144382-1-git-send-email-zhe.he@windriver.com
Link: https://lkml.kernel.org/r/20190927082230.34152-1-yongxin.liu@windriver.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Liu Haitao <haitao.liu@windriver.com>
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case of an error (e.g. memory pool too small), kmemleak disables
itself and cleans up the already allocated metadata objects. However, if
this happens early before the RCU callback mechanism is available,
put_object() skips call_rcu() and frees the object directly. This is not
safe with the RCU list traversal in __kmemleak_do_cleanup().
Change the list traversal in __kmemleak_do_cleanup() to
list_for_each_entry_safe() and remove the rcu_read_{lock,unlock} since
the kmemleak is already disabled at this point. In addition, avoid an
unnecessary metadata object rb-tree look-up since it already has the
struct kmemleak_object pointer.
Fixes: c566586818 ("mm: kmemleak: use the memory pool for early allocations")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only way to obtain the current memory pool size for a running kernel
is to check the kernel config file which is inconvenient. Record it in
the kernel messages.
[akpm@linux-foundation.org: s/memory pool size/memory pool/available/, per Catalin]
Link: http://lkml.kernel.org/r/1565809631-28933-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently kmemleak uses a static early_log buffer to trace all memory
allocation/freeing before the slab allocator is initialised. Such early
log is replayed during kmemleak_init() to properly initialise the kmemleak
metadata for objects allocated up that point. With a memory pool that
does not rely on the slab allocator, it is possible to skip this early log
entirely.
In order to remove the early logging, consider kmemleak_enabled == 1 by
default while the kmem_cache availability is checked directly on the
object_cache and scan_area_cache variables. The RCU callback is only
invoked after object_cache has been initialised as we wouldn't have any
concurrent list traversal before this.
In order to reduce the number of callbacks before kmemleak is fully
initialised, move the kmemleak_init() call to mm_init().
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: remove WARN_ON(), per Catalin]
Link: http://lkml.kernel.org/r/20190812160642.52134-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a memory pool for struct kmemleak_object in case the normal
kmem_cache_alloc() fails under the gfp constraints passed by the caller.
The mem_pool[] array size is currently fixed at 16000.
We are not using the existing mempool kernel API since this requires
the slab allocator to be available (for pool->elements allocation). A
subsequent kmemleak patch will replace the static early log buffer with
the pool allocation introduced here and this functionality is required
to be available before the slab was initialised.
Link: http://lkml.kernel.org/r/20190812160642.52134-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: kmemleak: Use a memory pool for kmemleak object
allocations", v3.
Following the discussions on v2 of this patch(set) [1], this series takes
slightly different approach:
- it implements its own simple memory pool that does not rely on the
slab allocator
- drops the early log buffer logic entirely since it can now allocate
metadata from the memory pool directly before kmemleak is fully
initialised
- CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option is renamed to
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE
- moves the kmemleak_init() call earlier (mm_init())
- to avoid a separate memory pool for struct scan_area, it makes the
tool robust when such allocations fail as scan areas are rather an
optimisation
[1] http://lkml.kernel.org/r/20190727132334.9184-1-catalin.marinas@arm.com
This patch (of 3):
Object scan areas are an optimisation aimed to decrease the false
positives and slightly improve the scanning time of large objects known to
only have a few specific pointers. If a struct scan_area fails to
allocate, kmemleak can still function normally by scanning the full
object.
Introduce an OBJECT_FULL_SCAN flag and mark objects as such when scan_area
allocation fails.
Link: http://lkml.kernel.org/r/20190812160642.52134-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an error occurs during kmemleak_init() (e.g. kmem cache cannot be
created), kmemleak is disabled but kmemleak_early_log remains enabled.
Subsequently, when the .init.text section is freed, the log_early()
function no longer exists. To avoid a page fault in such scenario,
ensure that kmemleak_disable() also disables early logging.
Link: http://lkml.kernel.org/r/20190731152302.42073-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running ltp's oom test with kmemleak enabled, the below warning was
triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is
passed in:
WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50
Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata
CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50
...
kmemleak_alloc+0x4e/0xb0
kmem_cache_alloc+0x2a7/0x3e0
mempool_alloc_slab+0x2d/0x40
mempool_alloc+0x118/0x2b0
bio_alloc_bioset+0x19d/0x350
get_swap_bio+0x80/0x230
__swap_writepage+0x5ff/0xb20
The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak
has __GFP_NOFAIL set all the time due to d9570ee3bd ("kmemleak:
allow to coexist with fault injection"). But, it doesn't make any sense
to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same
time.
According to the discussion on the mailing list, the commit should be
reverted for short term solution. Catalin Marinas would follow up with
a better solution for longer term.
The failure rate of kmemleak metadata allocation may increase in some
circumstances, but this should be expected side effect.
Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d9570ee3bd ("kmemleak: allow to coexist with fault injection")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
According to POSIX, EBUSY means that the "device or resource is busy", and
this can lead to people thinking that the file
`/sys/kernel/debug/kmemleak/` is somehow locked or being used by other
process. Change this error code to a more appropriate one.
Link: http://lkml.kernel.org/r/20190612155231.19448-1-andrealmeid@collabora.com
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-mm@kvack.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull stack trace updates from Ingo Molnar:
"So Thomas looked at the stacktrace code recently and noticed a few
weirdnesses, and we all know how such stories of crummy kernel code
meeting German engineering perfection end: a 45-patch series to clean
it all up! :-)
Here's the changes in Thomas's words:
'Struct stack_trace is a sinkhole for input and output parameters
which is largely pointless for most usage sites. In fact if embedded
into other data structures it creates indirections and extra storage
overhead for no benefit.
Looking at all usage sites makes it clear that they just require an
interface which is based on a storage array. That array is either on
stack, global or embedded into some other data structure.
Some of the stack depot usage sites are outright wrong, but
fortunately the wrongness just causes more stack being used for
nothing and does not have functional impact.
Another oddity is the inconsistent termination of the stack trace
with ULONG_MAX. It's pointless as the number of entries is what
determines the length of the stored trace. In fact quite some call
sites remove the ULONG_MAX marker afterwards with or without nasty
comments about it. Not all architectures do that and those which do,
do it inconsistenly either conditional on nr_entries == 0 or
unconditionally.
The following series cleans that up by:
1) Removing the ULONG_MAX termination in the architecture code
2) Removing the ULONG_MAX fixups at the call sites
3) Providing plain storage array based interfaces for stacktrace
and stackdepot.
4) Cleaning up the mess at the callsites including some related
cleanups.
5) Removing the struct stack_trace based interfaces
This is not changing the struct stack_trace interfaces at the
architecture level, but it removes the exposure to the generic
code'"
* 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
x86/stacktrace: Use common infrastructure
stacktrace: Provide common infrastructure
lib/stackdepot: Remove obsolete functions
stacktrace: Remove obsolete functions
livepatch: Simplify stack trace retrieval
tracing: Remove the last struct stack_trace usage
tracing: Simplify stack trace retrieval
tracing: Make ftrace_trace_userstack() static and conditional
tracing: Use percpu stack trace buffer more intelligently
tracing: Simplify stacktrace retrieval in histograms
lockdep: Simplify stack trace handling
lockdep: Remove save argument from check_prev_add()
lockdep: Remove unused trace argument from print_circular_bug()
drm: Simplify stacktrace handling
dm persistent data: Simplify stack trace handling
dm bufio: Simplify stack trace retrieval
btrfs: ref-verify: Simplify stack trace retrieval
dma/debug: Simplify stracktrace retrieval
fault-inject: Simplify stacktrace retrieval
mm/page_owner: Simplify stack trace handling
...
The only references outside of the #ifdef have been removed, so now we
get a warning in non-SMP configurations:
mm/kmemleak.c:1404:13: error: unused function 'scan_large_block' [-Werror,-Wunused-function]
Add a new #ifdef around it.
Link: http://lkml.kernel.org/r/20190416123148.3502045-1-arnd@arndb.de
Fixes: 298a32b132 ("kmemleak: powerpc: skip scanning holes in the .bss section")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 2d4f567103 ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.
kernel_init
kvm_guest_init
kvm_free_tmp
free_reserved_area
free_unref_page
free_unref_page_prepare
With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.
This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.
Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak keeps two global variables, min_addr and max_addr, which store
the range of valid (encountered by kmemleak) pointer values, which it
later uses to speed up pointer lookup when scanning blocks.
With tagged pointers this range will get bigger than it needs to be. This
patch makes kmemleak untag pointers before saving them to min_addr and
max_addr and when performing a lookup.
Link: http://lkml.kernel.org/r/16e887d442986ab87fe87a755815ad92fa431a5f.1550066133.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kmemleak scan can be cpu intensive and can stall user tasks at times. To
prevent this, add config DEBUG_KMEMLEAK_AUTO_SCAN to enable/disable auto
scan on boot up. Also protect first_run with DEBUG_KMEMLEAK_AUTO_SCAN as
this is meant for only first automatic scan.
Link: http://lkml.kernel.org/r/1540231723-7087-1-git-send-email-prpatel@nvidia.com
Signed-off-by: Sri Krishna chowdary <schowdary@nvidia.com>
Signed-off-by: Sachin Nikam <snikam@nvidia.com>
Signed-off-by: Prateek <prpatel@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak_scan() goes through all online nodes and tries to scan all used
pages.
We can do better and use pfn_to_online_page(), so in case we have
CONFIG_MEMORY_HOTPLUG, offlined pages will be skiped automatically. For
boxes where CONFIG_MEMORY_HOTPLUG is not present, pfn_to_online_page()
will fallback to pfn_valid().
Another little optimization is to check if the page belongs to the node we
are currently checking, so in case we have nodes interleaved we will not
check the same pfn multiple times.
I ran some tests:
Add some memory to node1 and node2 making it interleaved:
(qemu) object_add memory-backend-ram,id=ram0,size=1G
(qemu) device_add pc-dimm,id=dimm0,memdev=ram0,node=1
(qemu) object_add memory-backend-ram,id=ram1,size=1G
(qemu) device_add pc-dimm,id=dimm1,memdev=ram1,node=2
(qemu) object_add memory-backend-ram,id=ram2,size=1G
(qemu) device_add pc-dimm,id=dimm2,memdev=ram2,node=1
Then, we offline that memory:
# for i in {32..39} ; do echo "offline" > /sys/devices/system/node/node1/memory$i/state;done
# for i in {48..55} ; do echo "offline" > /sys/devices/system/node/node1/memory$i/state;don
# for i in {40..47} ; do echo "offline" > /sys/devices/system/node/node2/memory$i/state;done
And we run kmemleak_scan:
# echo "scan" > /sys/kernel/debug/kmemleak
before the patch:
kmemleak: time spend: 41596 us
after the patch:
kmemleak: time spend: 34899 us
[akpm@linux-foundation.org: remove stray newline, per Oscar]
Link: http://lkml.kernel.org/r/20181206131918.25099-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, kmemleak only prints the number of suspected leaks to dmesg but
requires the user to read a debugfs file to get the actual stack traces of
the objects' allocation points. Add a module option to print the full
object information to dmesg too. It can be enabled with
kmemleak.verbose=1 on the kernel command line, or "echo 1 >
/sys/module/kmemleak/parameters/verbose":
This allows easier integration of kmemleak into test systems: We have
automated test infrastructure to test our Linux systems. With this
option, running our tests with kmemleak is as simple as enabling kmemleak
and passing this command line option; the test infrastructure knows how to
save kernel logs, which will now include kmemleak reports. Without this
option, the test infrastructure needs to be specifically taught to read
out the kmemleak debugfs file. Removing this need for special handling
makes kmemleak more similar to other kernel debug options (slab debugging,
debug objects, etc).
Link: http://lkml.kernel.org/r/20180903144046.21023-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If kmemleak built in to the kernel, but is disabled by default, the
debugfs file is never registered. Because of this, it is not possible
to find out if the kernel is built with kmemleak support by checking for
the presence of this file. To allow this, always register the file.
After this patch, if the file doesn't exist, kmemleak is not available
in the kernel. If writing "scan" or any other value than "clear" to
this file results in EBUSY, then kmemleak is available but is disabled
by default and can be activated via the kernel command line.
Catalin: "that's also consistent with a late disabling of kmemleak when
the debugfs entry sticks around."
Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The early_param() is only called during kernel initialization, So Linux
marks the functions of it with __init macro to save memory.
But it forgot to mark the kmemleak_boot_config(). So, Make it __init as
well.
Link: http://lkml.kernel.org/r/20180117034720.26897-1-douly.fnst@cn.fujitsu.com
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A crash is observed when kmemleak_scan accesses the object->pointer,
likely due to the following race.
TASK A TASK B TASK C
kmemleak_write
(with "scan" and
NOT "scan=on")
kmemleak_scan()
create_object
kmem_cache_alloc fails
kmemleak_disable
kmemleak_do_cleanup
kmemleak_free_enabled = 0
kfree
kmemleak_free bails out
(kmemleak_free_enabled is 0)
slub frees object->pointer
update_checksum
crash - object->pointer
freed (DEBUG_PAGEALLOC)
kmemleak_do_cleanup waits for the scan thread to complete, but not for
direct call to kmemleak_scan via kmemleak_write. So add a wait for
kmemleak_scan completion before disabling kmemleak_free, and while at it
fix the comment on stop_scan_thread.
[vinmenon@codeaurora.org: fix stop_scan_thread comment]
Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org
Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by kmemleak at all.
So, remove the unused hardirq.h.
Link: http://lkml.kernel.org/r/1510959741-31109-1-git-send-email-yang.s@alibaba-inc.com
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak does one slab allocation per user allocation. So if slab fault
injection is enabled to any degree, kmemleak instantly fails to allocate
and turns itself off. However, it's useful to use kmemleak with fault
injection to find leaks on error paths. On the other hand, checking
kmemleak itself is not so useful because (1) it's a debugging tool and
(2) it has a very regular allocation pattern (basically a single
allocation site, so it either works or not).
Turn off fault injection for kmemleak allocations.
Link: http://lkml.kernel.org/r/20180109192243.19316-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bde5f6bc68 ("kmemleak: add scheduling point to
kmemleak_scan()") tries to rate-limit the frequency of cond_resched()
calls, but does it in a way which might incur an expensive division
operation in the inner loop. Simplify this.
Fixes: bde5f6bc68 ("kmemleak: add scheduling point to kmemleak_scan()")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup. We have seen a soft lockup when
do scan while compile kernel:
watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287]
[...]
Call Trace:
kmemleak_scan+0x21a/0x4c0
kmemleak_write+0x312/0x350
full_proxy_write+0x5a/0xa0
__vfs_write+0x33/0x150
vfs_write+0xad/0x1a0
SyS_write+0x52/0xc0
do_syscall_64+0x61/0x1a0
entry_SYSCALL64_slow_path+0x25/0x25
Fix this by adding cond_resched every MAX_SCAN_SIZE.
Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
