Add the device definitions and platform data to support
the console serial port on MSM8960 Simulator and RUMI3
targets.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
The clock debugfs code is large enough, and easy enough to separate,
that it deserves its own file which is compiled only when
CONFIG_DEBUG_FS is enabled.
Also, cleanup header file #includes that are no longer required.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
This is completely board specific and therefore must be provided
on a per-board basis.
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
Add the board file, Kconfig options, and Makefile options
needed to build for the MSM8960 Simulator target.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Clean up some of the conditionals in the Makefile in
preparation for adding build support for MSM8960.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Add support for setting the cold boot address of core 1 and
the warm boot addresses of cores 0 and 1 using a secure
domain call.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
SCM is the protocol used to communicate between the secure and
non-secure code executing on the applications processor. The
non-secure side uses a physically contiguous buffer to pass
information to the secure side; where the buffer conforms to a
format that is agreed upon by both sides. The use of a buffer
allows multiple pending requests to be in flight on the secure
side. It also benefits use cases where the command or response
buffer contains large chunks of data.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Initial framebuffer components. Add board-trout-panel.c
as well as platform parts to enable the framebuffer. This
code comes directly from Google's tree.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Beginning with the MSM8x60, the hardware block responsible for gpio
support changes. Provide gpiolib support for the new v2 architecture.
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Add the platform data for the IOMMUs found on the Qualcomm
msm8x60 SoC.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Register a driver for the MSM IOMMU devices and a driver
for the translation context devices. Set up the global
IOMMU registers and initialize the context banks.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Need to add this until real clock support for 8x60 goes in, or else some
drivers won't compile.
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Some builds may not support the proc-comm interface with
the baseband processor.
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Install a gpiolib driver supporting the on-chip gpios for
single-core MSMs in the 7x00 family, including 7x00A, 7x25, 7x27,
7x30, 8x50, and 8x50a.
As part of the ongoing effort to converge on a common code base,
this driver is based on the Google-Android msmgpio driver, whose
authors include Brian Swetland and Arve Hjønnevåg.
Cc: Arve Hjønnevåg <arve@android.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Now that all supported gpio_tlmm_config-using boards
are using gpiomux, remove the deprecated code.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Add the 'gpiomux' api, which addresses the following shortcomings
of existing tlmm api:
- gpio power-collapse, which is managed by a peripheral processor on
other targets, must be managed by the application processor on the 8x60.
- The enable/disable flag of the legacy gpio_tlmm_config api
is not applicable on the 8x60, and causes confusion.
- The gpio 'direction' bits are meaningless for all func_sel
configurations except for generic-gpio mode (func_sel 0), in which
case the gpio_direction_* functions should be used. Having these
bits in the tlmm api leads to confusion and misuse of the gpiolib
api, and they have been removed in gpiomux.
- The functional api of the legacy system ran contrary to the typical
use-case, which is a single massive configuration at boot. Rather
than forcing hundreds of 'config' function calls, the new api
allows data to be configured with a single table.
gpiomux_get and gpiomux_put are meant to be called automatically
when gpio_request and gpio_free are called, giving automatic
gpiomux/tlmm control to those drivers/lines with simple
power profiles - in the simplest cases, an entry in the gpiomux table
and the correct usage of gpiolib is all that is required to get proper
gpio power control.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[dwalker@codeaurora.org: renamed to trout, checkpatch cleanup]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Enables basic boot support for the MSM7x30 SURF development
board.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Enable CONFIG_ARCH_QSD8X50. This is the first SOC with the
Scorpion processor.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The 'PCOM' method of clock control (commands issued to the radio
CPU) is shared across several (but not all) Qualcomm SOCs.
Generalize this clock mechanism so these other SOCs can be added.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
devices.c is specific to the MSM7x00 series of SOCs. Rename
appropriately in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
- pull debug code into smd_debug.c
- move necessary structures and defines into smd_private.h
- fix some comment formatting, etc
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This code provides the low level interface to the "shared memory
state machine" (smsm), and the virtual serial channels (smd), used
to communicate with the baseband processor. Higher level transports
(rpc, ethernet, AT command channel, etc) ride on top of this.
Signed-off-by: Brian Swetland <swetland@google.com>
This adds acpuclock-arm11.c from Google. This provides control
over the cpu frequency for arm11 cpu's.
This has shared authorship between Google, and Qualcomm. Most
of it was written by Mike Chan at Google.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This is just enough to get the device booting and serial console
working. Sufficient for debugging further MSM7k/Dream Support.
This will support HTC Dream / T-Mobile G1 / Android ADP1 (which
are all the same hardware, known as "trout" to the ARM machine
database).
Signed-off-by: Brian Swetland <swetland@google.com>
Reviewed-by: GeunSik Lim <geunsik.lim@samsung.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
The baseband cpu owns the pmic, so voltage regulator control is only
available via a relatively limited interface through the proc_comm
transport.
Signed-off-by: Brian Swetland <swetland@google.com>
- Add some more peripherals (sdcc, etc) to the iomap.
- Remove virtual base addresses for devices that we should be passing
physical addresses to drivers via resources and ioremap()ing.
- don't try to use uarts for ll debug once the mmu is enabled due to
problems with the peripheral window
- make base addresses void __iomem * and fixup irq.c and timer.c
- Remove common.c and bring in devices.c/devices.h similar to
the PXA architecture.
Signed-off-by: Brian Swetland <swetland@google.com>
The proc_comm protocol is the lowest level protocol available for
communicating with the modem core. It provides access to clock and
power control, among other things, and is safe for use from atomic
contexts, unlike the higher level SMD and RPC transports.
Signed-off-by: Brian Swetland <swetland@google.com>
Add support for the Qualcomm MSM7200A eval board.
Common devices are defined in common.c, to avoid excessive
cut'n'pasting them into other board files.
Signed-off-by: Brian Swetland <swetland@google.com>
- core header files for arch-msm
- Kconfig and Makefiles to enable ARCH_MSM7X00A builds
- MSM7X00A specific arch_idle
- peripheral iomap and irq number definitions
Signed-off-by: Brian Swetland <swetland@google.com>
